AdvancedTCA

Showing results for: ipmi
Refine AdvancedTCA companies and products:
advancedtca 40 gbps advancedtca carrier blade advancedtca anniversary advancedtca specification picmg advancedtca 2011 advancedtca 40g xtca advancedtca architecture advancedtca 10 gbe advancedtca servers advancedtca blades long term evolution advancedtca all-ip advancedtca slots ipmi advancedtca advancedtca extensions advancedtca chassis advanced telecom computing architecture picmg advancedtca joe pavlat atca
Click on any vendor
to see a listing of
ipmi related products.
  • PT  (9)
    • AMP5095 7U PICMG 2.16 Platform
      Part of the company's Advanced Managed Platform offering (+)

      Features:

      19609.jpg
      • 7U, 19-in, CompactPCI PICMG 2.16 platform
      • Ten hot-swappable, 6U, standards-based slots
      • Eight payload slots
    • CPC7301 Intelligent Shelf Manager
      Shelf management ensures maximum service availability in a computing platform by monitoring sensors and predicting failures (+)

      Features:

      16545.jpg
      • 3U, single-slot, Intelligent Shelf Manager (ISM) card for all Performance Technologies platforms
      • Provides centralized management and alarming for system power supplies, fan trays, fabric slots, and node slots
      • Flexible design: Complete SBC with 600 MHz CPU, memory, operating system and peripherals, and upgradeable memory
    • CPC6314 325W DC Power Supply with IPMI Management
      A CompactPCI DC power supply with IPMI management (+)

      Features:

      16546.jpg
      • 325W output power
      • Hot-swap, N+1 load sharing
      • 47-pin input/output connector
    • AMP5091 4U Advanced Managed Platform
      4U, 19-inch rack-mount enclosure (+)

      Features:

      15047.jpg
      • Eight 6U hot-swappable slots (seven node slots, one dedicated switched fabric slot)
      • One hot-swappable intelligent shelf manager slot
      • PICMG 2.16-compliant backplane
    • AMP5086 12U PICMG 2.16 Advanced Managed Platform
      Part of the company's Advanced Managed Platform offering (+)

      Features:

      18355.jpg
      • 12U, 19-Inch rack-mount enclosure 21 hot-swappable, 6U, standards-based slots
      • 18 node slots
      • No CompactPCI bus
    • AMP5088 12U Advanced Managed Platform™
      12U, 19-inch rack-mount enclosure (+)

      Features:

      14114.jpg
      • 21 hot-swappable, 6U, standards-based slots
      • 18 node slots
      • Two 10/100/1000 PICMG® 2.16 redundant fabric slots
    • CPC358 8-Port WAN Communications Adapter
      The CPC358 is an eight port serial communications processor designed to operate in CompactPCI® systems as a peripheral or in a PICMG® 2.16 chassis as a stand-alone communications system (+)

      Features:

      14828.jpg
      • It provides OEMs, integrators and end users with a high performance platform for use in server farms or datacom/telecom applications
      • Featuring the Motorola MPC8255 PowerQUICC II™ processor, the CPC358 can independently process protocols such as X.25, Frame Relay, LAPD and Radar Receiver in an Internet/WAN environment
      • In Telecom applications, the CPC358 will also support MTP-2 on all eight links
    • AMP5085 12U Advanced Managed Platform
      A 12U, 19”, PICMG® 2.16 platform (+)

      Features:

      14115.jpg
      • 21 slots; 18 node slots, two 10/100/1000 PICMG 2.16 redundant fabric slots, and two 3U redundant PICMG 2.9 IPMI-based ISM slots
      • Four hot-swappable, redundant host slots for active/active or active/standby control-plane operation
      • 12 64-bit peripheral slots with H.110 telephony bus and rear-panel I/O
    • CPC5564 SBC
      The CPC5564 is the first 64-bit single slot CompactPCI single board computer designed for high-performance embedded applications, featuring the AMD Opteron 940 single core 2.2 GHz or dual core 1.8 GHz processor (+)

      Features:

      30352.jpg
      • 64-bit single or dual core processor support
      • Single slot high density compute blade
      • High-performance computing solution for PICMG® 2.16 systems
  • Intel  (15 of 18)
    • MPCMM0001 Chassis Management Module
      Ccompliant with the AdvancedTCA specification (+)

      Features:

      • Provides the interface between platform hardware and system software, supporting higher level management interfaces
      • Utilizes the Intelligent Platform Management Interface (IPMI) standard, via an innovative hybrid dual-star management topology, to gather and report metrics for specific modules or boards within the chassis
      • Multiple interfaces provide choice and flexibility for TEMs
    • MPCMM0001
      Comprehensive monitoring for health, status, state change, and component presence (+)

      Features:

      • Designed to be compatible with third-party PICMG 3.x- and IPMI-compliant components
      • Support for multiple management interfaces
      • Remote Management Control Protocol (RMCP)
    • Intel NetStructure® MPCMM0001
      Chassis Management Module (+)

      Features:

      • Compliant with AdvancedTCA specification
      • Provides the interface between platform hardware and system software, supporting higher level management interfaces
      • The CMM is the single point of administration and information for all the components in an AdvancedTCA compliant chassis
    • NetStructure ZT 5090
      Single CompactPCI slot system master processor board (+)

      Features:

      • Single or dual 800 MHz Pentium III processors
      • Optional PMC expansion slots (up to two)
      • Integrated 512 Kbyte L2 cache
    • NetStructure ZT 8101
      Single CompactPCI slot system master processor board (+)

      Features:

      14628.jpg
      • Single or dual 800 MHz Pentium III processors
      • Optional PMC expansion slots (up to two)
      • Integrated 512 Kbyte L2 cache
    • NetStructure ZT 4901
      Single CompactPCI slot system master processor board (+)

      Features:

      • Single or dual 800 MHz Pentium III processors
      • Optional PMC expansion slots (up to two)
      • Integrated 512 Kbyte L2 cache
    • NetStructure ZT 5524
      Single CompactPCI slot system master processor board (+)

      Features:

      12122.jpg
      • Single or dual 933 MHz Pentium III processors
      • Optional PMC expansion slots (up to two)
      • Integrated 512 Kbyte L2 cache
    • NetStructure ZT 4807
      Single CompactPCI slot system master processor board (+)

      Features:

      • Single or dual 800 MHz Pentium III processors
      • Optional PMC expansion slots (up to two)
      • Integrated 512 Kbyte L2 cache
    • NetStructure ZT 5088
      A 12U general purpose packet switched platform (+)

      Features:

      12120.jpg
      • Up to 50W per node slot and 80W per fabric slot power and cooling
      • Configurable for compute-intensive applications (up to 18 independent servers) or I/O-intensive applications with four 33/66 MHz PCI bus segments
      • 19-inch rackmount enclosure
    • NetStructure ZT 5504
      Supports quick time-to-market development for a broad range of telecom and Internet applications (+)

      Features:

      • Performance comes from the 1 GHz Intel Pentium III processor Low Power (BGA2) and the Intel 440 GX chipset
      • IPMI-based design provides increased management capabilities and reliability. Intel 82550 Fast Ethernet Multifunction PCI Controller with integrated Alert and optional CompactFlash is also supported
      • Validated with the Intel NetStructure family of packet switched backplane (PSB) products, and is designed to interoperate with third-party PICMG 2.16-compliant components [...]
    • Intel TSRLT2
      NEBS-3/ETSI certified 2U rack server (+)

      Features:

      • Optimized for I/O support
      • High-density 2U height
      • 6 GB 133 MHz SDRAM memory support
    • NetStructure ZT 5085
      A 12U redundant host packet switched platform (+)

      Features:

      12121.jpg
      • For I/O-intensive applications where H.110 or redundant host processing is required
      • Twelve 64-bit peripheral slots with H.110 telephony bus and rear-panel I/O
      • 21 slots (18 node slots, two fabric slots, and two 3U chassis management slots)
    • Intel NetStructure® IXB2800 3G Boards
      Integrated, high-performance, high-density data plane solutions for R99, R4, and R5 3G Universal Mobile Telecommunications System (UMTS) Radio Network Controllers (RNCs) (+)

      Features:

      • Intel IXP2800 network processors with RNC data plane software in an AdvancedTCA form factor
      • Single, high-performance IXP2800 processor executing MIPS-intensive 3G radio resource protocols can enable dramatic system footprint and cost reductions for next-generation RNC solutions because a single IXP2800 replaces multiple DSPs and ASICs.
      • Additional processing power is available for future 3G features
    • MPCBL0001 High-Performance SBC
      Compliant with AdvancedTCA specification (+)

      Features:

      • Dual Low Voltage Intel Xeon processors (2.0 GHz)
      • 400 MHz system bus
      • Designed to interoperate with AdvancedTCA products from Intel and with third-party building blocks meeting the PICMG 3.0 specification
    • MPCBL0020
      Intel Pentium M processor 760 (2.0 GHz) (+)

      Features:

      • Chipset: Intel E7520 Memory Controller Hub
      • PCI Express
      • Dual Star Gigabit Ethernet base and fabric
  • Advantech Corporation  (15)
    • MIC-3390
      CompactPCI-based high-performance Intel Pentium M single board computer with PCI Express and IPMI 2.0-compliant interface (+)

      Features:

      30060.jpg
      • Suitable for mission critical telecom and data communication applications where high availability is essential
      • 6U CPU board provides telecom equipment manufacturers (TEMs) with increased throughput and improved call-handling capabilities for applications at the edge of the network such as application servers, media gateway controllers, and home location registers
      • High-speed, low-power computing
    • MIC-3366
      A CompactPCI peripheral board with an integrated low-power Intel Pentium III processor at 700 MHz (+)

      Features:

      14175.jpg
      • Support up to 1 Gbyte of ECC SDRAM
      • Two PMC sites
      • Space for one 2.5” hard disk
    • PCE-7210
      Supports single/dual socket 604 Intel Xeon /LV Xeon 800 MHz FSB (+)

      Features:

      31672.jpg
      • Supports dual channel DDR2 400 ECC registered SDRAM up to 8 GB
      • Two PCIe x8 and one PCIe x4 links to backplane
      • Dual Gigabit Ethernet via PCIe x4 port
    • DSPA-8901
      AdvancedTCA® DSP Blade Provides Industry's Most Powerful DSP Farm for Voice and Video Processing (+)

      Features:

      195751711961128507.jpg
      • 20 Texas Instruments TMS320TCI6608 DSPs
      • 512 MB DDR3 memory per DSP
      • BCM56321 10 GbE switch for both Fabric Interface and Base Interface
    • Core™2 Duo 6U cPCI Board
      Supports Intel Core2 Duo processor (+)

      Features:

      35984.jpg
      • Intel 945GM chipset supports 533/667 MHz FSB
      • Up to 3 GB (DDR2 533/667) memory with SODIMM expansion
      • Comprehensive I/O capability: Dual Gigabit Ethernet, SATA, CompactFlash
    • Core™2 Duo Ruggedized 6U cPCI Board
      Supports board-mounted Intel Core Duo LV processor L2400 or the 64-bit Core2 Duo ULV processor U7500 (+)

      Features:

      35982.jpg
      • Intel 945GME chipset supports 533/667 MHz FSB
      • Up to 4 GB DDR2 533/667 memory with SODIMM expansion
      • Comprehensive I/O capability, with two dual Gigabit Ethernet through RIO, SATA HDD, CompactFlash, VGA port
    • Core Duo / Core2 Duo PrAMC
      Highly integrated single-width, mid-size processor AMC (+)

      Features:

      35979.jpg
      • Supports Intel Core Duo / Core2 Duo processor LV
      • Intel 3100 chipset 400/533 MHz FSB
      • Up to 2 GB DDRII 400 MHz SDRAM with ECC
    • Pentium M / Celeron M PrAMC
      Highly integrated single-width, mid-size, processor AMC (+)

      Features:

      35980.jpg
      • Supports Intel Pentium M processor Low Voltage or Celeron M processor Ultra Low Voltage
      • Intel 3100 chipset 400/533 MHz FSB
      • Up to 2 GB DDRII 400 MHz SDRAM with ECC
    • MIC-3392
      Supports Intel Core 2 Duo processor (+)

      Features:

      32852.jpg
      • Intel 945GM chipset supports 533/667 MHz FSB
      • Up to 4 GB (DDR2 533/667) memory with SODIMM expansion
      • Comprehensive I/O capability, dual Gigabit Ethernet, SATA, CompactFlash
    • MIC-3392L
      A high-performance, power-efficient CompactPCI single board computer based on the Intel Core 2 Duo processor (+)

      Features:

      43483.jpg
      • Supports Intel Celeron M 440 processor
      • Intel 945GME chipset supports 533/667 MHz FSB
      • Up to 2 GB (DDR2 533/667) memory with SODIMM expansion
    • MIC-5301
      Two Dual-Core Intel Xeon processor LV 2.0 GHz (+)

      Features:

      32878.jpg
      • Intel E7520 chipset supports 667 MHz FSB
      • Dual channel DDR2 400 MHz ECC Registered SDRAM, configurable up to 16 GB
      • Four 1000BASE-BX ports on Fabric interface
    • MIC-5602Rev2 Intel® Core™2 Duo Processor AMC
      The MIC-5602Rev2 is a highly integrated single-width, full-size, processor AMC (+)

      Features:

      44168.jpg
      • Its design is based on the low-power, high-performance 45nm Intel Core 2 Duo processor, combined with the Intel 3100 chipset
      • The board includes 2 or 4 GB of soldered DDR2 400 MHz memory with ECC for higher MTBF and optimum cooling
      • To facilitate development, test, and integration while offering typical network connectivity once deployed, the front panel provides a Gigabit Ethernet connector, a serial port, and a USB 2.0 host port
    • MIC-3393 6U CPCI Intel® Xeon® 5400 Processor Blade
      Using Intel 45nm 64-bit Xeon technology with up to four cores at 2.13 GHz combined with the powerful San Clemente chipset, the MIC-3393 blade boosts computing and I/O performance deploying the latest virtualization, multithreading, and I/OAT acceleration techniques (+)

      Features:

      44167.jpg
      • Enhanced Xeon packaging; front side bus parity; on-board, soldered DRAM with ECC support and RASUM features integrated in the 5100 MCH, combined with PICMG 2.9 and IPMI-based management, make the MIC-3393 a highly available and reliable high-performance computing engine
      • Supports 45nm Intel Xeon LV/ULV processor
      • Intel 5100MCH chipset supports 1066/1333 MHz FSB
    • DSPA-8901 AdvancedTCA® DSP Blade
      With its 20 onboard TMS320C6678 DSPs at 1.0GHz core frequency, the DSPA-8901 provides 160 cores of processing power to reach the levels of performance density needed to build the highest capacity media gateways. The DSPA-8901 significantly reduces overall system power dissipation and system cost, and frees up valuable slots in gateway elements for additional subscriber capacity and throughput. The DSPA-8901 includes a high-performance Freescale QorIQ P2020 processor. A Broadcom BCM56321 switch terminates the 10 Gigabit Ethernet fabric connections and distributes traffic to the 20 DSPs. The DSPA-8901 offers unrivaled packet and media processing capabilities. For increasing demand in high-end video conferencing, broadcasting and tele-presence fields, the DSPA-8901 ATCA blade also offers unmatched image processing performance for compression and decompression, image analysis, filtering and format conversion. FEATURES: ››20 Texas Instruments TMS320C6678 DSPs ››512 MB - 2 GB DDR3 memory per DSP ››BCM56321 10GbE switch for both Fabric Interface and Base Interface ››Freescale® QorIQ® P2020 for Local Management Processor (LMP) ››IDT Tsi577 Serial RapidIO switches ››Pigeon Point System IPMI 2.0 ››Wind River Linux PNE-LE 4.0 support for P2020 ››Single-slot PICMG 3.0/3.1 compliant [...] (+)

      Features:

    • ZA-101S
      A thin server in a compact, 1U design ruggedized PCI bus architecture (+)

      Features:

      • 100 MHz Pentium III processors
      • Up to 4,096 Mbytes of SDRAM
      • Includes a FDD/CD-ROM combo drive
  • Pentair Electronics Protection  (1)
    • ACB-VI Shelf Manager Based on ShMM 700
      The new Shelf Manager ACB-VI includes the ShMM 700 module (formerly Pigeon Point Systems), delivering improved security, higher availability and more robust design. (+)

      Features:

      333793534861715517.jpg
      • The Intelligent Platform Management Interface (IPMI) implementation has been upgraded by simplifying radial IPMI via a Field Programmable Gate Array (FPGA).
      • The IPMB-0 segments are logically isolated for each slot.
      • Support for communication between redundant Shelf Managers has been improved by replacing the six discrete channels used in previous versions with a stable two wire bus.
  • LV Power  (5)
    • LVDC350W3U2IPMI
      Complete Intelligent Platform Management Interface (IPMI) (+)

      Features:

      19289.jpg
      • 3U X 2 Slot DC/DC 350W
      • 5V@30A,3.3V@40A, 12V@5A, -12V@1A
      • Totally independent current rails
    • LVDC200-350W3U1IPMI
      CompactPCI power supply DC input 3U (+)

      Features:

      • 1 or 2 slot thickness
      • 200 W, 325 W, 350 W
      • With/without full IPMI implementation
    • Power Supplies
      Advanced power conversion topologies (+)

      Features:

      33500.jpg
      • Focus on the needs of the CompactPCI, server, and storage markets
      • Standard and custom DC input CompactPCI supplies from 200-350 W with complete IPMI functionality
      • High density, high efficiency CompactPCI supplies, specifically designed to allow maximum free airflow through the chassis
    • LV350DC3U2IPMISF
      DC/DC 350 Watt: 3U x 2 slot package (+)

      Features:

      • New and Unique DC Model
      • Very high output in a 3U x 2 slot package
      • PICMG Spec 2.11 Compatible
    • LV1872DC320W3U2
      Mixed force convection/conduction cooled chassis, which keep the external and internal air paths separate to avoid condensation forming on the Printed Circuit Cards (PCCs) (+)

      Features:

      • IPMI functionality option
      • RoHS green construction
      • Lightweight
  • GE Intelligent Platforms, Inc.  (15 of 29)
    • MicroTCA MP-2000
      Pre-validated Modular MicroTCA Platform (+)

      Features:

      34043.jpg
      • 2U/13-slot and chassis
      • Preconfigured with processor, networking, storage and graphics AdvancedMCs
      • Pre-validation guarantees interoperability, minimizes integration time
    • MicroTCA MP-3000
      Pre-validated modular MicroTCA platform (+)

      Features:

      34044.jpg
      • 8U/15-slot chassis
      • Preconfigured with processor, networking, storage and graphics AdvancedMCs
      • Pre-validation guarantees interoperability, minimizes integration time
    • Telum 1001-DE
      AMC.1 & PCI-e Rev 1.0 compliant (+)

      Features:

      22359.jpg
      • Full duplex DS3/E3 Interface
      • ATCA AMC Hot Swap compliant
      • Intelligent Platform Management Interface (IPMI)
    • DS3/E3
      AMC.1 and PCIe Rev. 1.0 compliant (+)

      Features:

      • Full duplex DS3/E3 interface
      • AdvancedTCA AMC Hot Swap compliant
      • Intelligent Platform Management Interface (IPMI)
    • TELUM 1000 Line
      155 Mbps full duplex line-speed (+)

      Features:

      19053.jpg
      • PCI Express; PCI-e Rev. 1.0-compliant
      • Support for 16,000 VCCs; 4 MB local memory
      • Traffic management supported: ABR, CBR, UBR, and VBR
    • Telum 1001-O12M/S
      AMC.1 and PCIe Rev 1.0 compliant (+)

      Features:

      21483.jpg
      • 1 port full duplex OC-12 interface with optional Automatic Protection Switching (APS)
      • 8 MB local memory; supports up to 16,000 VCCs
      • Hot Swap compliant
    • Telum 1004-O3M/S
      AMC.1 and PCIe Rev 1.0 compliant (+)

      Features:

      21484.jpg
      • 4 Port full duplex OC-3 Interface
      • Optional Automatic Protection Switching (APS)
      • 4 MB local memory; supports up to 16,000 VCCs
    • Telum 1004-03
      AMC.1 & PCI-e Rev 1.0 compliant (+)

      Features:

      • 4 Port full duplex OC-3 Interface w/ optional
      • Automatic Protection Switching (APS)
      • 4MB local memory ; supports up to 16,000 VCCs
    • TELUM 1001-DE DS3/E3 Wan Adapter AdvancedMC
      Full duplex DS3/E3 interface (+)

      Features:

      22476.jpg
      • AMC.1 & PCIe Rev 1.0 compliant
      • AdvancedTCA AdvancedMC hot swap compliant
      • Intelligent Platform Management Interface (IPMI)
    • Telum ASLP11
      High performance processor AdvancedMC module (+)

      Features:

      38385.jpg
      • Up to 4 GB of ECC memory
      • Intel Core 2 Duo L7400 1.5 GHz CPU
      • Single width, full- or mid-sized AdvancedMC processor board
    • Telum GE-QT Gigabit Ethernet NIC
      Single-width, half-height AdvancedMC form factor (+)

      Features:

      21485.jpg
      • 4 Gigabit Ethernet ports accessible through the front panel
      • AMC.1 design using 4x PCI Express bus
      • IPMI controller fully compatible with the AMC specification
    • Telum GE-QT AMC 4 Port GbE
      Single-width, half-height AdvancedMC form factor (+)

      Features:

      • 4 Gigabit Ethernet ports accessible through the front panel
      • AMC.1 design using x4 PCI Express bus
      • IPMI controller fully compatible with the AMC specification
    • CE7
      A low-power, 6U CompactPCI single board computer (+)

      Features:

      • Pentium III or Celeron processor at 500 to 850 MHz
      • Up to 1 Gbyte of SDRAM with ECC
      • VGA/LCD video controller with 4 Mbytes of SDRAM
    • CP7
      500 to 850 MHz 6U low power mobile Celeron/Pentium III CompactPCI single board computer (+)

      Features:

      4362.jpg
      • Up to I Gbyte SDRAM with ECC
      • VGA/LCD video up to 1600 x 1200 with 4(2) Mbyte high speed SDRAM
      • Flash drive up to 512 Mbytes or local hard disk
    • CP238
      A CompactPCI-based PMC expansion carrier card (+)

      Features:

      16649.jpg
      • 6U CompactPCI form factor
      • 64-bit, 33/66-MHz PCI
      • Blue Light hot swap with registers
  • Thales Computers  (4)
    • R2U4S/R4U8S/R8U16S
      Set of COTS 19-inch rack-mount VME industrial enclosures (+)

      Features:

      • Suited to meet a wide range of customers' needs and deployment of industrial-grade hardware in hostile environments.
      • Available in 2U, 4U, and 8U
      • House a range of 6U VME64x backplanes featuring P0 connectors of 4, 8, and 16 slots, respectively
    • PENTXM4
      The PENTXM2 is the first server class manageable 6U single slot VME single board computer to feature a dual-core processor and a Board Management Controller (BMC) (+)

      Features:

      32650.jpg
      • Both Thales' PENTXM4 and PENTXM2 use the 1.67 GHz dual-core Xeon, Intel's most advanced low-power x86 technology, combined with the Intel E7520 server class Memory Controller Hub (MCH)
      • The PENTXM4 is available with 2 GB of DDR2-400 SDRAM
      • When paired with the support of VITA 31.1 backplane networking, the PENTXM4's VITA 38 intelligent platform management interface (IPMI) feature provides for easy scaling into a multiprocessing system
    • PENTXM2
      Thales' PENTXM2 uses the 1.67 GHz dual-core Xeon, Intel's most advanced low-power x86 technology, combined with the Intel E7520 server class memory controller hub (MCH) (+)

      Features:

      32649.jpg
      • The PENTXM2 is available with up to 4GB of DDR2-400 SDRAM
      • When paired with the support of VITA 31.1 backplane networking, the PENTXM2's VITA 38 intelligent platform management interface (IPMI) feature provides for easy scaling into a multiprocessing system
      • The PENTXM2 provides a dual SATA-150, a triple USB 2.0 port and an EIDE interface for an on-board disk or compact-flash support
    • cPENTXM2
      6U CompactPCI blade SBC featuring an Intel 1.67 GHz dual core Xeon with 667 MHz FSB and E7520 server-class memory controller hub (+)

      Features:

      32712.jpg
      • Functionally identical to the VME-based PENTXM2, giving users the ability to choose their favorite form factor: CompactPCI for rugged, and VME for really rugged
      • Scalable SBC can be equipped with up to 4 GB ECC DDR2-400 SDRAM
      • Dual GbE ports routed to the backplane compliant with PICMG 2.16/VITA 31 (switched Ethernet)
  • Kontron  (15 of 37)
    • AM4020
      Single-width AdvancedMC processor module (+)

      Features:

      44089.jpg
      • Designed with the new Intel Mobile Core i7 processor
      • Single-width Kontron AM4020 AdvancedMC processor board integrates for the first time the memory controller, PCI Express, and the graphics processor within the multi-core processor
      • Intel QM 57 Platform Controller Hub
    • CP6012-64
      IntelCore 2 Duo processor (+)

      Features:

      33133.jpg
      • Meets the highest performance standards
      • In combination with the E7520 chipset, the CP6012-64 manages data throughput with server quality
      • The PICMG 2.16-compatible CP6012-64 features an L2 cache that is twice as large (4 MB), a much improved internal architecture, and 64-bit Intel technology for increased performance over the Core Duo option
    • AM4100
      1.5 GHz Dual Core Freescale PowerPC MPC8641D (+)

      Features:

      33527.jpg
      • Up to 2.3 MIPS/MHz computing performance and highest Ethernet bandwidth suitable for modular AdvancedTCA carriers or highly integrated, redundant MicroTCA multiprocessing systems
      • Integrated Altivec 128-bit Vector Processing Unit, which also replaces DSPs
      • Fits telecommunication equipment manufacturers and enterprise datacoms' needs
    • AM4101
      An AdvancedMC processor module (+)

      Features:

      • Based on the 1.5 GHz dual core Freescale PowerPC MPC8641D, the Kontron AM4101 delivers up to 2.3 MIPS/MHz computing performance and the highest Ethernet bandwidth without breaking the power budgets of modular AdvancedTCA carriers or highly integrated, redundant MicroTCA multiprocessing systems
      • Integrated Altivec 128-Bit Vector Processing unit
      • Suitable for telecom, medical, industrial imaging, and military/aerospace applications
    • CP3002 and CP3923 – a perfect pair for 3U CPCI
      Core i7 Processor Board and Gigabit Ethernet Switch (+)

      Features:

      45804.jpg
      • The Kontron CP3002-RC, with the Intel Core i7 mobile processor, is conduction cooled and supports operational temperatures ranging from -40°C to +85°C according to VITA 47
      • The powerful processor and the ruggedness make the board ideal for a wide range of realtime and data intensive applications in military and other sectors that require reliable performance in harsh environments
      • The Kontron CP3923 is a fully managed layer 2/3 Gigabit Ethernet switch offering IPv4/IPv6 routing and full management capabilities
    • CP3002 and CP3923 – a perfect pair for 3U CPCI
      Core i7 Processor Board and Gigabit Ethernet Switch (+)

      Features:

      45804.jpg
      • The Kontron CP3002-RC, with the Intel Core i7 mobile processor, is conduction cooled and supports operational temperatures ranging from -40°C to +85°C according to VITA 47
      • The powerful processor and the ruggedness make the board ideal for a wide range of realtime and data intensive applications in military and other sectors that require reliable performance in harsh environments
      • The Kontron CP3923 is a fully managed layer 2/3 Gigabit Ethernet switch offering IPv4/IPv6 routing and full management capabilities
    • AT8030 – 3xCore2Duo
      AdvancedTCA Triple Intel Core 2 Duo processor blade with AdvancedMC support and integrated switch for 10 GbE on fabric (+)

      Features:

      39454.jpg
      • Suitable processor node for IMS clustering applications
      • Three Intel Core2 Duo processors each with dedicated memory, plus one AdvancedMC slot and an integrated Gigabit switch fully manageable via PowerQuick III processor for 10 GbE on the fabric interface
      • Enables TEMs and NEPs who build IMS and IPTV-related equipment to run, for example, three different applications across the three independent Intel dual-core processors
    • AM4520 SAS AMC
      Full-size/mid-size (AMC.0 Rev 2.0); AMC.3 compliant (+)

      Features:

      36012.jpg
      • Management through IPMI 1.5 implementation
      • Up to 146 GB capacity; 10,000 rpm, 4.1 ms average seek time; 8 MB cache buffer for improved performance
      • S.M.A.R.T. technology capable
    • AM4330
      AdvancedMC IPSec module (+)

      Features:

      32254.jpg
      • Mid-size form factor
      • IPsec encryption performance: IPV4/IPV6 ESP, (3DES/SHA1) 1.5 Gbps (1500-byte packet); IPV4/IPV6 ESP (AES128/SHA1) 2.6 Gbps (1500- byte packet)
      • Public key performance; 1K IKE handshakes/sec (quickmode w/2DH); 1K SSL/TLS handshakes/sec
    • AT8030
      Three Intel Core2 Duo Low Voltage dual-core processors that maintain an overall low power envelope of 140 W (+)

      Features:

      33523.jpg
      • Each CPU core runs at 1.66 GHz and is paired with a dedicated set of DDR memory, up to 8 GB for one CPU core, and up to 4 GB for each of the remaining two core processors
      • Each CPU can be managed separately via IPMI and IPMC, and can run an OS independently
      • With the combination of the onboard GbE switch, multiple VLAN settings can be established with a capacity of 6 GbE combined, and groomed to the fabric interface within one of two 10 GbE ports
    • 6U CPCI GbE Switch
      PICMG 2.16 compliant 6U CompactPCI managed Ethernet switch now available in three rugged levels -- R1, R2 and R3 for scalable ruggedness (+)

      Features:

      36101.jpg
      • Boost in switching capacity allows systems to stay ahead of the rising transaction and traffic load for VoIP applications
      • Supports all relevant standards in carrier grade L2 and L3 switching, routing, VLANs and QoS (Diffserv) developed by Kontron
      • Comes with the latest technologies for non-blocking layer 3 switching and routing and has a 24-port GbE layer 3 switch with 19 link ports to CPCI boards and 1 link port to second fabric boards (all ports 10/100/1000BASE-T)
    • XL-LP42
      A 4U, CompactPCI, high-density packet-switched platform (+)

      Features:

      • Eight slots: seven node slots and one dedicated switched-fabric slot
      • PICMG 2.16-compliant backplane with reserved slot for an integrated layer 2/3 Ethernet switch
      • H.110 computer telephony bus
    • AT8900 ATCA Base Interface Switch
      16 ports Gigabit Ethernet base fabric switch (+)

      Features:

      22033.jpg
      • Intel IX5416 GbE switch fabric
      • ZNYX Open Architect 3.0
      • Two Fast Ethernet ports for chassis and out-of-band management
    • AM4300 Full Height Single Width quad GbE AMC
      Full height single width (+)

      Features:

      21947.jpg
      • Multiple configurations available
      • PCIe x8, x4, x2, and x1 link supports
      • Management through IPMI 1.5
    • AM4002
      AdvancedMC processor module (+)

      Features:

      32255.jpg
      • Single-width, full-height
      • Intel Pentium M, scalable up to 2.0 GHz
      • Max. 4 GB DDR2 400 MHz memory
  • Radisys Corporation  (14)
    • Promentum ATCA-4580
      10-gigabit compute processing module based on a dual Intel Xeon 5600 processor (+)

      Features:

      44558.jpg
      • The ATCA-4580 is one of the 8th generation single board computers from Radisys
      • It is a high performance, single slot AdvancedTCA computer module based on a dual socket L5638 Intel Xeon processor
      • It is ideal for server-centric applications, media processing applications, or LTE infrastructure
    • Promentum ATCA-1000
      Four PCI Mezzanine Card (PMC) Sites with Front Panel Access (+)

      Features:

      19675.jpg
      • 2 PIM connections through optional RTM for sites 2 and 4
      • Onboard 8-port Gigabit Ethernet Switch (Broadcom BCM5682)
      • Internal 512KB packet buffer
    • EPC-3412
      A PICMG 2.16-compliant CPU blade (+)

      Features:

      16739.jpg
      • Full PICMG 2.16 and 2.9 compliance
      • 1.2 GHz Mobile Intel Pentium 4 Processor-M
      • Intel 845E with ICH4 chipset
    • Promentum ATCA-4550 & ATCA-4555
      10-gigabit compute processing module based on Intel Xeon 5600 processor (+)

      Features:

      44557.jpg
      • The ATCA-4550 series are the 8th generation single board computers from Radisys
      • They are high performance, single slot AdvancedTCA computer modules based on the single socket L5638 or E5645 Intel Xeon processor
      • They are ideal for control plane and server functions for LTE wireless infrastructure, Deep Packet Inspection, IPTV, IP multimedia subsystems and defense application
    • Promentum ATCA-3000
      Single slot AdvancedTCA PICMG 3.0/3.1 compliant Fibre Channel disk storage module (+)

      Features:

      19738.jpg
      • Fully managed Fibre Channel storage module supporting module level hot swap
      • Single 3.5" disk drive site carrying 300 GB high performance, high reliability SCSI drive
      • Supports 1 Gbps or 2 Gbps Fibre Channel addressable through IPMI
    • ESM-3100
      A combination switched-fabric switch and system IPMI manager for CompactPCI (+)

      Features:

      11898.jpg
      • PICMG 2.16-compliant
      • Integrates Fast Ethernet switch with Gigabit uplinks and IPMI management
      • Supports 24 ports of fast Ethernet Layer 2 switching with Layer 3 extensions along with 4 Gigabit Ethernet uplinks [...]
    • CP50
      A modular 9U CompactPCI PICMG 2.16-compliant platform for 19-inch racks (+)

      Features:

      11897.jpg
      • Switched-fabric backplane
      • Integrated IPMI management
      • High availability
    • 1GbE ComputeSystem
      3rd generation NEBS-compliant Flex21 supporting 90 W per slot (+)

      Features:

      36002.jpg
      • 1 GbE backplane fabric and TDM backplane
      • Integrated shelf managers with IPMI & console connectivity
      • Trillium protocol packages for IMS & NGN
    • EPC-3307
      CompactPCI peripheral processor (+)

      Features:

      • Provides full MTP2 layer processing
      • Supports up to 8 ports of V.35 and E1/T1 interfaces and four ports of high-speed links
      • Up to 512 MB of SDRAM
    • cPCI 1GbE System
      Provides high capacity computing solution with up to 38 Core 2 Duo dual core compute nodes, each of which is supported by its own local memory and I/O to maximize performance (+)

      Features:

      33079.jpg
      • -High-Performance Platform for IMS and NGN Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Up to 38 Core 2 Duo (Dual Core) low voltage compute nodes
    • ATCA 1GbE System
      Bladed compute system provides a very high capacity solution with up to 10 Dual-Core Intel Xeon Processor LV compute nodes in a 5U chassis (or 24 compute nodes in a 12U chassis) (+)

      Features:

      33078.jpg
      • High Performance Platform for IMS and NGN Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Processing: Up to 24 Dual-Core low voltage compute nodes
    • Radisys Promentum ATCA 4.0 Platform
      40 Gigabit AdvancedTCA Application Ready Platform (+)

      Features:

      44296.jpg
      • As TEMs focus on building next-generation network elements, they need a platform providing next-generation switching, power, and cooling, and supporting high-bandwidth applications such as LTE, WiMAX, femtocell gateways, and video
      • Satisfying these requirements, the Radisys ATCA 4.0 platform, based on the company's 4th generation of AdvancedTCA products, ensures a smooth and economical transition to the ATCA 4.0 environment
      • Radisys ATCA 4.0 products are highly scalable and dense, and offer a four times performance improvement in both switching and processing capabilities over 10G offerings
    • SYS50
      A PICMG 2.16 compliant 9U platform (+)

      Features:

      15846.jpg
      • High availability design
      • Redundant 24-link port, Fast Ethernet ,Layer 2 Switches with built-in platform management software
      • Intelligent platform management: Fault notification and prediction, user configurable alarm thresholds, SNMP management interface to hardware platform, and remote resetting and power cycling
    • Promentum MPCBL0050
      High performance Intel based AdvancedTCA blade based on the Dual-Core Intel Xeon LV5218 process that provides 4 processor cores on a single platform (+)

      Features:

      35998.jpg
      • Supports Solaris 10 – in certification testing at SUN
      • Superior subsystem scalability and density (subscribers/transactions per board), supporting the maximum number of network elements
      • Support both the Radisys MPRTM0040 and MPRTM0050, which provides a choice of cost effective storage and limited connectivity, vs a full feat
  • Extreme Engineering Solutions (X-ES)  (7)
    • XPm2120
      The XPm2120 is a VITA 62-compliant 3U VPX power supply (+)

      Features:

      181732205216165139.jpg
      • allocates 12V as the primary distribution rail across the backplane to the payload modules
      • MIL-STD-704 28V-DC input voltage
      • up to 300W on 3.3V, 5V, and ±12V
    • XChange1004
      Dual PrPMC CompactPCI Carrier Card with PICMG 2.16 Switched Ethernet (+)

      Features:

      • 100 MHz PCI-X CompactPCI and Local Bus Interfaces
      • Autosense System / Peripheral Slot
      • Hot Swap Support
    • XChange1002
      Dual PrPMC Carrier Card with PICMG 2.16 Switched Ethernet (+)

      Features:

      • 100-MHz PCI-X and Local Bus Interfaces
      • Hot Swap Support
      • Two 10/100/1000 Mbs PICMG 2.16 Backplane Ethernet Ports
    • XCalibur1412
      The XCalibur1412 with SecureCOTS™ technology provides an industry-leading combination of security and performance. It features dual Intel® Xeon® E5-2600 v4 family processors (formerly Broadwell-EP) with a tightly coupled Xilinx Kintex® UltraScale™ security FPGA and two up to 56 Gb/s InfiniBand or 40/56 Gigabit Ethernet ports. It is designed and manufactured in the USA, using COTS components from trusted domestic supply chains. It integrates ruggedization features that enable it to perform in environmentally challenging applications without modifications or enhancements. (+)

      Features:

      3745739690225629537.jpg
      • Supports dual Intel® Xeon® E5-2600 v4 family of processors (formerly Broadwell-EP)
      • PICMG 3.0 AdvancedTCA (ATCA) processing blade
      • Integrated Xilinx Kintex® UltraScaleâ„¢ security FPGA (XCKU060 or XCKU095)
    • XPm2220
      The XPm2220 is a 3U VPX VITA 62-compliant power supply. The XPm2220 takes in a MIL-STD-704 or MIL-STD-1275 28 VDC input voltage and provides up to 300 W on 3.3 V, 5 V, and ±12 V at up to 90% efficiency. The XPm2220 also provides on-card MIL-STD-461 EMI filtering and MIL-STD-1275 transient suppression. FEATURES: 3U VPX VITA 62-compliant power supply MIL-STD-704 and MIL-STD-1275 28 VDC input voltage MIL-STD-461 EMI filtering Up to 300 W isolated output on 3.3 V, 5 V, and ±12 V Isolated 3.3 V AUX supply Up to 90% efficient -40°C to 85°C conduction-cooled operating temperature (at the thermal interface) VITA 48.2 REDI compliant 0.8 in. pitch-compliant 1.0 in. pitch with 2 Level Maintenance (2LM) support Optional load-sharing support with another XPm2220 IPMI controller for on-card voltage monitoring and control Nuclear Event Detection (contact X-ES) [...] (+)

      Features:

    • XPm2020
      The XPm2020 is a VITA 62-compliant 3U VPX power supply that takes in a MIL-STD-704 28V-DC input voltage and provides up to 300 W on 3.3V, 5V, and ±12V at up to 90% efficiency. The XPm2020 also provides on card MIL-STD-461E EMI filtering and optional on card hold-up capacitance, which provides 75 ms of hold-up time (at 120 W output). (+)

      Features:

      192300989216165139.jpg
      • MIL-STD-704 28V-DC input voltage
      • MIL-STD-461E EMI filtering
      • VITA 62.0-compliant power supply
    • XCalibur4643
      The XCalibur4643 is a high-performance, 6U OpenVPX™, single board computer featuring an Intel® Xeon® D (formerly Broadwell-DE) processor, a Xilinx Kintex UltraScale FPGA, four 10 Gigabit Ethernet ports on the data plane, and three x4 PCI Express Gen3-capable interfaces on the expansion plane. It provides up to 16 GB of DDR3-1600 ECC SDRAM in two channels, two XMC/PrPMC slots, and up to 128 GB of SATA NAND flash, and supports up to five Gigabit Ethernet ports, four SATA ports, three USB ports, and up to four RS-232/422/485 serial ports out the front panel and/or backplane. (+)

      Features:

      318148079022259305.jpg
      • Supports Intel® Xeon® D processors (formerly Broadwell-DE)
      • Xilinx Kintex UltraScale XCKU040 FPGA
      • VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)
  • Inventec Enterprise System Corporation  (1)
    • A1000
      AdvancedTCA blade (+)

      Features:

      34775.jpg
      • 64-bit X86, PICMG 3.0 compliant
      • Dual Intel Xeon processors 2.0 to 3.6 GHz, with 800 MHz Front Side Bus
      • Up to four DDR2 DIMM slots, support 2 GB per DIMM
  • Annapolis Micro Systems, Inc.  (1)
    • WILDSTAR 7 for OpenVPX 6U
      • VX690T or VX980T (+)

      Features:

      315312383861401726.jpg
      • • Up to 8 GB of DDR3 DRAM for 51.2 GB/s of DRAM bandwidth
      • • Up to 128 MB of QDRII+ SRAM for 64 GB/s of SRAM bandwidth
      • • PCIe Gen3 8x from each FPGA to on-board PCIe switch
  • Agilent Technologies  (1)
    • eRMC Base
      An Intelligent Platform Management Interface (IPMI)-compliant monitoring system (+)

      Features:

      • For use with low-end systems based on the low pin count bus standard
      • Combines a remote management solution and baseboard management controller in one chip
      • Remote access, notification, and built-in system management
  • QLogic Corp.  (2)
    • Zircon Baseboard Management Controller
      Compliance with Intelligent Platform Management Interface (IPMI) draft, version 1.5 (+)

      Features:

      • Compliance with PCI industrial computers manufacturers group (PICMG) System management Specification 2.9 D1.0 for CompactPCI Solutions
      • Up to 60 general purpose I/O pins
      • 12 tachometer inputs for fan speed monitoring
    • Zircon
      A baseboard management controller (+)

      Features:

      • Monitors health of the system such as remote temperature sensors
      • Integrates up to two Intelligent Platform Management Busses (IPMB) making it dual ported BMC-compatible with both new and legacy CompactPCI systems
      • Hot Swap compliant
  • ELMA Electronic  (8)
    • 39C08ADX48Y3HQ2X
      The product family has features targeted for High Availability (HA) applications (+)

      Features:

      • Full pluggability
      • Shelf management options
      • Redundancy
    • MicroTCA EcoBox System Platform
      Low-cost MicroTCA system platform (+)

      Features:

      39607.jpg
      • Desktop or rack-mount
      • One MCH and 5 single AdvancedMC slots
      • Power Module (PM) uses a 300 W ATX power supply
    • Type 15H -19" Rackmount, 2.16 HA Chassis
      9U (H) x 84HP (W) x 290mm (D) (+)

      Features:

      • 16 slot, 6U x 160mm, front
      • 16 slot, 6U x 80mm, rear I/O
      • 16 slot BP, (PICMG 2.16, 2 x FS, wo/H.110)
    • EcoBox
      The chassis opens up MicroTCA to be competitive in more cost-conscious industrial, transportation, enterprise and other applications (+)

      Features:

      • The chassis is a 6-slot single module unit with 1 MicroTCA Carrier Hub (MCH) and 5 AMC slots
      • The system platform uses a standard 300 W ATX power supply
      • The IPMI bus for voltage supply and control is integrated on an active backplane
    • 6U cPSB
      A PICMG 2.16-compliant backplane (+)

      Features:

      • Eight slots total
      • Connector for shelf managers specifically geared for high-availability applications
      • 20-pin header with various signal functions
    • 2nd gen 5U AdvancedTCA Chassis
      Elma Electronic Inc., a global manufacturer of electronic packaging products, has upgraded its 5U AdvancedTCA chassis with full redundancy (+)

      Features:

      38556.jpg
      • The system platform offers dual redundant fan trays, shelf managers, and A/C power supply options
      • The 2nd Gen 5U AdvancedTCA Chassis features side-to-side cooling via plug-in fan trays with dual 170 CFM fans with Pulse Width Modulation control. The redundant push/pull configurations of the fans offer higher levels of reliability
      • The fans reach the back of the chassis for cooling the rear I/O slots
    • Slim 6U 4-slot cPCI Backplane
      A slim 6U, four-slot CompactPCI backplane with a special shelf-management implementation (+)

      Features:

      • Computer-simulated, eight-layer stripline design
      • Power studs and power blades dispersed throughout key locations in the backplane
      • Fits in a 2U, low-profile horizontal chassis
    • cPSB HA Backplane
      An 8-slot PICMG 2.16-compliant packet-switching backplane for systems requiring High Availability (HA) (+)

      Features:

      17053.jpg
      • Fits 4U horizontal chassis
      • Includes connection to shelf managers specifically geared for HA applications
      • Pins for the Intelligent Platform Management Bus (IPMB) incorporated into a 20-pin header with other signal functions, usable for standard shelf managers or Elma IPM Sentry Shelf Manager
  • Agilent-Acqiris  (1)
    • PC502
      PC501GHz Pentium III processor: - 32 Kbytes L1 cache - 256 Kbytes L2 cache - no CPU fan needed (+)

      Features:

      • Single slot
      • Up to 1 Gbyte of Synchronous ECC DRAM
      • High performance EIDE interfaces with optional on-board disk drive (in a single slot)
  • Carlo Gavazzi Computing Solutions  (1)
    • ATCA Starter Kit
      A complete AdvancedTCA development system (+)

      Features:

      • Available with a six slot, full mesh backplane that supports the AdvancedTCA PICMG 3.0, 3.1, 3.2, 3.3, 3.4, and 3.5 specifications
      • Supports AdvancedTCA hardware and software testing and development
      • Can be used as a system for proof of concept and customer demonstrations
  • MEN Micro Elektronik GmbH  (1)
    • D6
      6U Single board computer (+)

      Features:

      30659.jpg
      • Pentium M or Celeron M processor
      • 24 PCI Express (PCIe) lanes
      • Suitable for communication and control applications in rugged environmental conditions
  • Concurrent Technologies, Inc.  (15 of 16)
    • TR B1x/msd - 4th generation Intel® Coreâ„¢ based 3U VPX Processor Board
      The TR B12/msd is a PC-compatible high performance 3U VPX processor board supporting the 4th generation Intel® Core™ processor and the Intel® QM87 PCH with up to 16 Gbytes of DDR3L-1600 ECC DRAM. The TR B12/msd features an optional XMC site and a range of I/O interfaces including four SATA600 channels, dual 1000Base-BX, serial and USB2.0/USB3.0 interfaces. The board provides a flexible PCI Express® (Gen 1, Gen 2 and Gen 3) backplane fabric interface for use in systems defined by OpenVPX (VITA 65). For rugged applications VPX-REDI Type 1 and VPX-REDI Type 2 conduction-cooled version is available. The board is suitable for a range of applications within the defense, aerospace, security and surveillance market sectors in particular. Optional front panel providing inclusive I/O: • 1 x USB3.0, 3 x RS232, 1 x Gigabit Ethernet, 1 x DisplayPort Optional XMC module interface (with front/rear I/O): • XMC module interface (2 x4 or 1 x8 PCI Express® Gen 2) • Optional board security packages Optional Built-In Test (BIT) supports: • Power-on BIT, Initiated BIT, Continuous BIT • Optional Rear Transition Modules • Commercial and Ruggedized conduction-cooled VPX-REDI versions (RCx-Series) Complementary products include: • Switch Fabric boards • XMC carriers • Mass Storage Boards • Development Systems • Fabric Interconnect Networking Software (FIN-S) FEATURES: 3U VPX (VITA 46.0) N-Series single board computer 4th generation Intel®Core™ processor Up to 16 Gbytes soldered DDR3L-1600 DRAM with ECC Configurable control plane fabric interface (VITA 46.6) supports: 2 x SerDes (1000Base-BX) ports or 1 x SerDes plus 1 x Gigabit Ethernet ports or 2 x Gigabit Ethernet ports Configurable PCI Express®(PCIe) data plane fabric interface (VITA 46.4) supports: 2 x 4 PCIe ports, 4 x2 PCIe ports or a 1 x8 PCIe port Support for Gen 1, Gen 2 and Gen 3 Compatible with OpenVPX module profiles Single non-transparent port Compatible with the FR 331/x06 VPX Switch Up to 4 x SATA600 mass storage interfaces Support for onboard SATA Flash Drive Module Up to 4 x serial interfaces and up to 3 x USB interfaces IPMI (Intelligent Platform Management Interface) Watchdog and long duration timers Up to 3 x independent graphics interfaces Optional high definition stereo audio [...] (+)

      Features:

    • FP 110/019
      A 24-port GbE Switched Fabric Board for PICMG 2.16- or VITA 31.1-based systems (+)

      Features:

      32516.jpg
      • Typically consumes less than 20 W
      • Offers twenty-four 10/100/1000Mbps autonegotiating Ethernet ports, 19 accessible via a PICMG 2.16 or a VITA 31.1 packet switched backplane
      • Switch core contains a wire-speed, Layer 2, Quality of Service (QoS) switch fabric
    • Single/Dual HDD AMC
      Double/single width full- or mid-height AdvancedMC (+)

      Features:

      34036.jpg
      • Option of one or two 2.5" SATA hard disk or CompactFlash drives fitted
      • Suitable for AdvancedTCA, MicroTCA, and proprietary platforms
      • Compatible with Raid 0 and Raid 1 systems
    • EthernetSwitch Fabric
      10 ports, Ethernet switched fabric board, up to 10/100/1000BASE-T (+)

      Features:

      • 8 node ports, fabric-to-fabric link, and a front panel interface
      • Marvell 88E6185 Gigabit Ethernet or Marvell 88E6083 Fast Ethernet devices
      • Non-blocking Layer 2 “unmanaged” switch
    • FP 100/008 Switched Fabric Board
      10 ports, Ethernet switched fabric board, 10/100BASE-T (+)

      Features:

      19731.jpg
      • PICMG 2.16 and VITA 31.1 compatible
      • 8 node ports, fabric-to-fabric link, and a front panel interface
      • Marvell 88E6083 Fast Ethernet device
    • FP 110/008 Gig Ethernet Switch Fabric Board
      Entry-level, 10-port Ethernet switched fabric board for PICMG 2.16- or VITA 31.1-based systems (+)

      Features:

      22339.jpg
      • Up to 10/100/1000BASE-T Ethernet per port
      • Eight packet switching node ports
      • Fabric-to-fabric Ethernet link
    • CRT and DFP AMC
      Single-width, full- or mid-height AdvancedMC, CRT, and DFP graphics adapter, option for 2.5" SATA Hard Disk Drive fitted (+)

      Features:

      34035.jpg
      • Suitable for AdvancedTCA, MicroTCA, and proprietary platforms
      • Analog CRT output, up to 1,280 x 1,024 pixels at 85 Hz refresh rate
      • Up to 24-bit color
    • FP 110/019 - 6U CompactPCI Ethernet Switch
      FP 110/019 is a 24-port 10/100/1000Mbps Ethernet Switched Fabric Board for use in CompactPCI® PICMG® 2.16 and VITA 31.1 Packet Switched Backplane environments. It supports up to nineteen node boards, a fabric to fabric link and for user connections, up to four front panel Ethernet interfaces. It offers high speed, full line rate Layer 2 switching fabric on all Ethernet ports. Quality of Service (QoS) operation is supported with four priority queues and a variety of traffic classes for time-critical and multimedia traffic. System monitoring is provided by the PICMG 2.9 compliant IPMI subsystem, supporting the IPMB0 serial management bus. The FP 110/019 is an excellent choice for cost sensitive applications. Typical applications include networking equipment, voice over IP (VoIP) telephony systems and blade-based servers. FEATURES: 6U CompactPCI, Layer 2 Ethernet Switch, PICMG 2.16 and 2.9 compliant [...] (+)

      Features:

    • AM 31x/x0x
      One of the first AdvancedMC high performance processor boards to benefit from the latest 2nd generation Intel Core processors (+)

      Features:

      47666.jpg
      • 2nd generation Intel Core processor: - 4-core 2.1 GHz Intel Core i7-2715QE processor - 2-core 1.5 GHz Intel Core i7-2610UE processor - 2-core 2.2 GHz Intel Core i7-2655LE processor - 2-core 2.5 GHz Intel Core i5-2515E processor
      • Up to 8 Gbytes of DDR3-1333 SDRAM (with ECC)
      • 3 x Gigabit Ethernet interfaces: AMC.2 Type E2 - 2 interfaces, SERDES type -1 interface via front panel RJ45 connector
    • AM 91x/x1x - 3rd generation Intel® Coreâ„¢ Processor AdvancedMCâ„¢ Module
      AM 91x/x1x is a single-width, full or mid-size AdvancedMC™ processor module supporting 3rd generation Intel® Core™ processors and the Mobile Intel® QM77 Express Chipset with up to 16 Gbytes of DDR3-1600 ECC DRAM. The AM 91x/x1x is designed in compliance to AMC.0, AMC.1 Type 8 (x8 PCI Express®, Gen 1, Gen 2 or Gen 3), AMC.2 Type E2 (2 x Gigabit Ethernet) and AMC.3 Type S2 (2 x SATA ports). The module also features up to three USB ports, two RS232 ports, two additional SATA ports, one additional Gigabit Ethernet interface and an optional DisplayPort interface. Supporting full hot swap and IPMI capabilities with a range of industry standard operating systems, the AM 91x/x1x is designed for use in AdvancedTCA® or MicroTCA™ applications in the telecommunications, scientific, and defense markets. FEATURES: ##Single-width, full or mid-size AdvancedMC™ processor module, ##3rd generation Intel® Core™ processor, ##Up to 16 Gbytes of DDR3-1600 DRAM with ECC, 3 x Gigabit Ethernet interfaces, x8 PCI Express® (Gen 1, Gen 2 and Gen 3) fabric port [...] (+)

      Features:

    • AM 95x/x1x - 3rd Generation Intel® Coreâ„¢ Processor AdvancedMCâ„¢ Module
      AM 95x/x1x is a single-width, full or mid-size AdvancedMC™ processor module supporting the 3rd generation Intel® Core™ i7 processor and Mobile Intel® QM77 Express Chipset with up to 16 Gbytes of DDR3-1600 ECC DRAM. The AM 95x/x1x is designed in compliance to AMC.0, AMC.2 Type E2 (2 x Gigabit Ethernet) and AMC.3 Type S2 (2 x SATA ports). The module also features up to three USB 2.0 ports, two RS232 ports, two additional SATA ports, a x2 PCIe Gen 2 port, and two additional Gigabit Ethernet interfaces. Supporting full hot swap and IPMI capabilities with a range of industry standard operating systems, the AM 95x/x1x is designed for use in AdvancedTCA® or MicroTCA™ applications in the telecommunications, scientific, and defense markets. FEATURES: Single-width, full or mid-size AdvancedMC™, 3rd generation Intel® Core™ processor options, up to 16 Gbytes of DDR3-1600 DRAM with ECC, 4 x Gigabit Ethernet interfaces, Up to 3 x external USB 2.0 ports, support for onboard SATA Flash Disk Module, up to 4 x Serial ATA interfaces on rear I/O, 2 x RS232 serial channel interfaces [...] (+)

      Features:

    • AM 92x/x1x- 3rd generation Intel® Coreâ„¢ Processor AdvancedMCâ„¢ Module
      AM 92x/x1x is a single-width, full or mid-size AdvancedMC™ processor module based on a 3rd generation Intel® Core™ processor and Intel® QM77 Chipset with up to 16 Gbytes of DDR3-1600 ECC DRAM. The AM 92x/x1x is designed in compliance to AMC.0, AMC.2 Type E2 (2 x Gigabit Ethernet) and AMC.3 Type S2 (2 x SATA ports). The module also features up to three USB 2.0 ports, two RS232 ports, two additional SATA ports, a x2 PCIe Gen 2 port, one additional Gigabit Ethernet interface and a DisplayPort interface. Supporting full hot swap and IPMI capabilities with a range of industry standard operating systems, the AM 92x/x1x is designed for use in AdvancedTCA® or MicroTCA™ applications in the telecommunications, scientific, and defense markets. FEATURES: Single-width, full or mid-size AdvancedMC™, 3rd generation Intel® Core™ processor options, up to 16 Gbytes of DDR3-1600 DRAM with ECC, 3 x Gigabit Ethernet interfaces, Up to 3 x external USB 2.0 ports, support for onboard SATA Flash Disk Module, up to 4 x Serial ATA interfaces on rear I/O, 2 x RS232 serial channel interfaces, DisplayPort interface on front panel [...] (+)

      Features:

    • AM 94x/x1x - 3rd Generation Intel® Coreâ„¢ Processor AdvancedMCâ„¢ Module
      AM 94x/x1x is a single-width, full or mid-size AdvancedMC™ processor module supporting the 3rd generation Intel® Core™ i7 processor and Mobile Intel® QM77 Express Chipset with up to 16 Gbytes of DDR3-1600 ECC DRAM. The AM 94x/x1x is designed in compliance to AMC.0, AMC.4 Type 5 and Type 10 (single or dual x4 Serial RapidIO®), AMC.2 Type E2 (2 x Gigabit Ethernet) and AMC.3 Type S2 (2 x SATA ports). The module also features up to three USB 2.0 ports, two RS232 ports, two additional SATA ports, a x2 PCIe Gen 2 port, and two additional Gigabit Ethernet interfaces. Supporting full hot swap and IPMI capabilities with a range of industry standard operating systems, the AM 94x/x1x is designed for use in AdvancedTCA® or MicroTCA™ applications in the telecommunications, scientific, and defense markets. FEATURES: Single-width, full or mid-size AdvancedMC™, 3rd generation Intel® Core™ processor options, up to 16 Gbytes of DDR3-1600 DRAM with ECC, up to two x4 Serial RapidIO® (SRIO) fabric ports, 4 x Gigabit Ethernet interfaces, Up to 3 x external USB 2.0 ports, support for onboard SATA Flash Disk Module, up to 4 x Serial ATA interfaces on rear I/O, 2 x RS232 serial channel interfaces [...] (+)

      Features:

    • AM 90x/x1x- 3rd generation Intel® Coreâ„¢ Processor AdvancedMCâ„¢ Module
      AM 90x/x1x is a double-width, full or mid-size AdvancedMC™ processor module supporting the 3rd generation Intel® Core™ processor and the Mobile Intel® QM77 Express Chipset with up to 16 Gbytes of DDR3-1600 ECC DRAM. The AM-90x/x1x is designed in compliance to AMC.0, AMC.1 Type 8 (x8 PCI Express®, Gen 1, Gen 2 or Gen 3), AMC.2 Type E2 (2 x Gigabit Ethernet) and AMC.3 Type S2 (2 x SATA ports). The board features a range of interfaces including serial ports, USB ports, Gigabit Ethernet interfaces, DVI-D and a DisplayPort interfaces. The board interfaces can be configured to be SCOPE Alliance compliant and MTCA.4 compatible. Supporting full hot swap and IPMI capabilities with a range of industry standard operating systems, the AM 90x/x1x is designed for use in AdvancedTCA®, MicroTCA® or MicroTCA for Physics applications in the telecommunications, scientific, and physics research markets. FEATURES: Double-width, full or mid-size AdvancedMC™ processor module, 3rd generation Intel® Core™ processor, Up to 16 Gbytes of DDR3-1600 DRAM with ECC, x8 PCI Express® (Gen 1, Gen 2 and Gen 3) fabric port, 4 x Gigabit Ethernet interfaces, up to 4 x SATA interfaces on rear I/O, 2 x SATA interfaces for optional onboard storage [...] (+)

      Features:

    • AM C1x/msd - 4th Generation Intel® Coreâ„¢ Processor AdvancedMCâ„¢ Module
      AM C1x/msd is a single-width, full or mid-size AdvancedMC™ processor module supporting a 4th generation Intel® Core™ processor (2-core or 4-core) and the Intel® QM87 PCH with up to 16 Gbytes of DDR3L-1600 ECC DRAM. The AM C1x/msd is designed in compliance to AMC.0, AMC.4 Type 5 and Type 10 (single or dual x4 Serial RapidIO®), AMC.2 Type E2 (2 x Gigabit Ethernet) and AMC.3 Type S2 (2 x SATA ports). The module also features up to three USB 2.0 ports, two RS232 ports, two additional SATA ports, a x2 PCIe Gen 2 port, and two 10 Gigabit Ethernet interfaces. Supporting full hot swap and IPMI capabilities with a range of industry standard operating systems, the AM C1x/msd is designed for use in AdvancedTCA® or MicroTCA™ applications in the telecommunications, scientific, and defense markets. FEATURES: Single-width, full or mid-size AdvancedMC™, 4th generation Intel® Core™ processor options, up to 16 Gbytes of DDR3-1600 DRAM with ECC, up to two x4 Serial RapidIO® fabric ports, 2 x 10G Ethernet front panel connections and 2 x rear Gigabit Ethernet interfaces, Up to 3 x external USB 2.0 ports, support for onboard SATA Flash Disk Module, up to 4 x Serial ATA interfaces on rear I/O, 2 x RS232 serial channel interfaces [...] (+)

      Features:

  • VadaTech Inc.  (5)
    • VT006
      Carrier which utilizes the VadaTech VT001 Shelf Manager (+)

      Features:

      35671.jpg
      • Carrier is designed to fit the Kaparal Chassis
      • Carrier has all the requirements per AdvancedTCA specification such as the Telco Alarms, isolated DC/DC converter, and LEDs
      • When two VT006 are in the system, they operate in redundant active/standby mode
    • AMC207
      Dual-port 10Base2 (with two additional 10/100 ports as media converter) AdvancedMC module (+)

      Features:

      35673.jpg
      • VadaTech offers this product in a single-width, mid-height form factor based on the AMC.1 specification (option for full-height design, see ordering options). The 10-Base2 50 Ohm termination is set by a jumper on the board
      • AMC.1
      • Single-width, mid-height (Full-height option available)
    • AMC603
      2.5 inch SATA HDDs in a single-width, full-height storage module in the Advanced Mezzanine Card (AMC) form factor based on the AMC.1 or AMC.3 specifications (+)

      Features:

      35672.jpg
      • The hard disk drives can support data transfer rates of over 150 MBps and provides up to two 200 GB of storage capacity (total of 400 GB) Suitable for adding high-capacity storage and can run as RAID zero (striping across the two drivers for increased space and performance) or RAID one (mirroring two drives for fault failure)
      • It can also run as two independent disks
      • Two 2.5 inch SATA HDDs available up to 400 GB (two disks)
    • AMC090
      Optically isolated digital input AdvancedMC module (+)

      Features:

      32388.jpg
      • 16-channel optically isolated digital inputs
      • Eight TTL/CMOS channels
      • Eight 0 V to 10 V channels
    • AT800
      AdvancedTCA 48-Port GbE with 10-GbE Uplink Switch (+)

      Features:

      35670.jpg
      • Serves a number of egress ports using SFP sockets and one XFP socket for 10 Gigabit Ethernet
      • Module has five 10/100/1000-BASETX in the front
      • Use of the SFP sockets allows each port to be loaded with a plug in module to support Ethernet over fiber, either single-mode or multi-mode, or copper
  • Comtel Electronics GmbH  (10)
    • Intelligent 300 W Thermal Load Board
      If you are qualifying high-power blades and you are not sure how airflow test reports apply to you, we have the answers (+)

      Features:

      44436.jpg
      • AdvancedTCA blades are drawing more power and getting denser
      • Comtel Electronics is now offering a way to test the most important characteristic of your AdvancedTCA chassis – temperature
      • Comtel's load board is controlled via any AdvancedTCA compliant shelf manager using standard IPMI commands
    • AdvancedTCA® Intelligent Thermal Load Boards
      IPMC controlled (+)

      Features:

      22172.jpg
      • 230 W main
      • 35 W RTM
      • Heating in eight zones
    • ComtelCO2-3U System
      19” rack mounted 3U system (+)

      Features:

      36004.jpg
      • AC / DC Economy AdvancedTCA Version
      • 2 slot horizontal front boards and R
      • 2 slot high performance backplane, 6.25 Gbps with full mesh fabric connections
    • ATCA CO14N
      Nine-inch rack-mount 13U system (+)

      Features:

      43782.jpg
      • 4-slot 8U front boards and RTM
      • Full Mesh and Dual Star topologies available
      • 4 slot high performance Backplane, 10 Gbps
    • 5 slot AdvancedTCA NEBs compliant. CO-5
      19” rack-mounted 5U system (+)

      Features:

      • 5 slot horizontal front boards and RTM
      • 5 slot high performance Backplane
      • 6.25 Gbps with replicated full mesh fabric trays
    • Thermal Load Board
      Designed for analysis of cooling efficiency of AdvancedTCA chassis (+)

      Features:

      34103.jpg
      • Front and RTM loads
      • Managed over IPMB from the ShMC
      • Front - Power dissipation up to 200 W
    • 8 slot AdvancedTCA NEBs compliant. CO-8
      19” rack-mounted 7U system (+)

      Features:

      • 8 slot horizontal front boards and RTM
      • 8 slot high performance backplane
      • 6.25 Gbps with replicated full mesh fabric connections
    • 2 slot AdvancedTCA NEBs compliant. CO-1
      19” rack-mounted 3U system (+)

      Features:

      22166.jpg
      • Single slot horizontal front boards and RTM
      • Redundant EMC filtered power feeds
      • Push-pull cooling with hot-swap redundant fan trays
    • 14 slot AdvancedTCA NEBs compliant. CO-14
      19” rack-mounted 13U system (+)

      Features:

      • 14 slot 8U horizontal front boards and RTM
      • Full Mesh and Dual Star topologies available
      • 14 slot high performance backplane
    • 2 slot AdvancedTCA NEBs compliant. CO-2
      19" rack-mounted 3U system (+)

      Features:

      22163.jpg
      • 2 slot horizontal front boards and RTM
      • 2 slot high performance backplane
      • 6.25 Gbps with replicated full mesh fabric connections
  • American Portwell Technology  (4)
    • CAR-4003
      CAR-4003 1U Network Communications Appliance based on quad-core Intel Xeon processor 3400 series or Intel Core i5 or Core i3 processor, w/ up to 20 GbE ports, PCI-E 2.0 and IPMI (+)

      Features:

      • Quad-core Intel Xeon processor X3400 or L3400 (formerly codenamed Lynnfield) or Intel Core i5 or Core i3 processor (formerly codenamed Clarkdale)
      • Integrated memory and PCI Express 2.0 controller
      • Intel Turbo Boost Technology
    • TANC-5250
      High computing power of dual Intel LV Xeon processors with Intel NetBurst microarchitecture and 400/533 MHz FSB (+)

      Features:

      • Six 64-bit Gigabit Ethernet ports based on Intel 82546EB, provide high performance capability
      • Intel E7501 chipset
      • One 64-bit/66 MHz PMC interface
    • TANC-5260
      High computing power of dual Intel LV Xeon processors with Intel NetBurst microarchitecture and 400Mhz FSB (+)

      Features:

      18632.jpg
      • Six 64-bit Gigabit Ethernet ports based on Intel 82546EB, provide high performance capacity
      • Intel E7501 chipset
      • One 64-bit/66MHz PMC interface
    • TANC-5320
      Dual Intel Xeon LV Nocona processor based, AdvancedTCA node card with three 64-bit/133 MHz PMC Interfaces (+)

      Features:

      • High computing power of dual Intel LV Xeon processors with 800 MHz FSB
      • Three 64-bit/133 MHz PMC interfaces
      • Intel E7520 chipset
  • Elma Electronic - Systems  (1)
    • 12-Slot MicroTCA.4 Platform
      Elma's family of MicroTCA.4 development platforms support up to 12 slots front and rear single/double mid-sized AMCs. The powered chassis features full IPMI support, switched GigE, direct SATA/SAS connections. We offer system level integration with board level selections from Elma and industry partners. These crates are currently used in prominent physics labs around the world. FEATURES: 19� rackmount crate / platform designed to meet MicroTCA.4.for Physics Supports up to 12 single/double mid-size AMC slots and uRTMs Front to rear cooling with IPMI support Supports one or two full-size MCHs Switched GigE ports Direct connections for SATA/SAS & other I/O [...] (+)

      Features:

  • Schroff Pentair  (4)
    • 450/40 ATCA Family
      Schroff® 450/40, AdvancedTCA family of systems, are designed to support today’s more powerful multi-core processors. (+)

      Features:

      220553287961351930.jpg
      • 19" chassis come in 2, 6, and 14-slot varieties
      • 40GBASE-KR4 (40G) capable backplanes
      • Available for both AC and DC applications
    • 23098-147
      Available with Full Mesh or Dual Star topology (+)

      Features:

      • 14 slot backplane
      • Proven design
      • Redundant 48VDC power input
    • AdvancedTCA chassis 14 slot
      Available with Full Mesh or Dual Star topology (+)

      Features:

      • 14 slot backplane
      • Proven design
      • Redundant 48VDC power input
    • ATCA 14 Slot Full Mesh Backplane 23005-303
      A PICMG 3.0 compliant 14-slot AdvancedTCA backplane (+)

      Features:

      • Full Mesh topology (Base Interface centered)
      • Supports four ports per channel
      • Update ports supported
  • ADLINK Technology, Inc.  (6)
    • MCS-2080 Media Cloud Server
      The ADLINK MCS-2080 provides a modular architecture, is designed for media applications, and offers mass data processing capabilities. The MCS-2080 leverages ADLINK’s MICA (Modular Industrial Cloud Architecture) hybrid design for compute nodes, supporting the installation of either eight 1/4-width dual-system, dual-processor nodes (Intel® Core™ i3/i5/i7 processors or Intel® Xeon® processor E3), or four 1/2-width single-system, dual-processor nodes (Intel® Xeon® processor E5), or a combination of both. The Intel® Core™/Intel® Xeon® processor E3 systems have built-in hardware acceleration units for video processing and are suitable for handling video transcoding and analytics tasks. The Intel® Xeon® processor E5 systems provide high performance computing ideal for big data tasks. The MCS-2080 supports the IPMI 2.0 specification to provide web-based intelligent system management, as well as support for Serial over LAN (SOL) on compute nodes. Dual redundant power supply units include power health monitoring and abnormal situation alert using the IPMI interface. In addition, designers can speed up product development with ADLINK’s MediaManager, which enables prototyping for frequently used video server functions, and open source software from OpenStack and Apache YARN ecosystems, a big data-ready platform. (+)

      Features:

      342266984871160435.jpg
      • 16 systems (MCN-1500 compute node) or 4 systems (MCN-2600T compute node), hybrid combinations supported
      • Supports Intel® Quick Sync Video (GT4e graphics) with hardware assisted H.265/VP9 transcoding
      • Dual redundant switch nodes, each providing 16x 1G internal links to compute nodes and 4x 10G uplinks
    • cPSB-880 Series
      9U Packet Switched Blade Platform (+)

      Features:

      32464.jpg
      • Suitable development platform for telecom applications focusing on gateways such as media gateway, signaling gateways, as well as telecom value-added services like LBS (Location Based Service), RBT (RingBackTone), and MMS (Multimedia Message System)
      • Standard 6U CompactPCI and PICMG 2.16, 2.9 & H.110 CT Bus
      • Dual PICMG 2.16 fabric slots for switching-HA
    • cPCI-6810
      6U CompactPCI, Pentium III Low Voltage processors (+)

      Features:

      20805.jpg
      • Single-slot, 64-bit/66 MHz universal SBC
      • Single slot 6U CompactPCI
      • Universal 64-bit/66 MHz CompactPCI bus, hot-swappable
    • cPCIS-3300BLS series
      A 9U rackmount CompactPCI blade server subsystem (+)

      Features:

      14885.jpg
      • Standard 6U CompactPCI and PICMG 2.16 open architecture
      • Dual PICMG 2.16 fabric slots for switching-HA
      • Total 21 slots, including configurable 12 node slots, two fabric slots, three redundant 6U 8HP CompactPCI power modules, and one optional CMM slot
    • cPCI-3970
      ADLINK's cPCI-3970 Series is the first 3U CompactPCI PlusIO compatible processor blade in its product lineup that supports high-speed serial point-to-point connections. The ADLINK cPCI-3970 Series is equipped with the latest quad and dual core 2nd Generation Intel Core i7/i5 processor with ECC memory support, and the Intel QM67 Platform Controller Hub (PCH). It is a high performance solution for applications in industrial control and automation, transportation, and medical segments that require enhanced graphics capabilities, ECC memory and high speed I/O interconnects. The cPCI-3970 Series includes two blade types based on the same electrical and mechanical design: the cPCI-3970 which is equipped with HM connectors, and the fully PICMG 2.30 compliant cPCI-3971 which features an Ultra Hard Metric (UHM) J2 connector with a data transfer speed of 5 Gb/s. Both products are compatible with the CompacPCI PlusIO pin assignment and support PCI Express Gen2 x4, three SATA ports, three USB 2.0 ports and two Gigabit Ethernet ports at the J2 connector. (+)

      Features:

      183916293701794017.jpg
      • 2nd generation Intel Core i7/i5 quad/dual-core processor
      • Supports DDR3-1333 SDRAM with ECC via SO-CDIMM, up to 16GB
      • Supports IPMI for system health monitoring
    • CSA-7400 MICA Network Appliance
      The ADLINK CSA-7400 is a high-performance, high-density computing platform supporting four dual Intel® Xeon® processor E5 compute nodes, interconnected by dual redundant switch modules. This product is designed as a next-generation network security appliance and offers a highly scalable design in a compact 2U rackmount form factor for packet inspection, firewall, load balancer, network monitoring, security gateway, and voice gateway applications. The CSA-7400 can ensure uninterrupted service delivery through hot-swappable compute nodes and switch modules. It is ideally suited for building next generation high-performance firewalls and virtualized telecom elements. ADLINK network appliances are accompanied by the ADLINK PacketManager, a software package that includes control plane configuration tools and data plane processing acceleration capabilities. ADLINK network appliances provide increased packet processing speed and are ideal for Software Define Networking (SDN) switches and Next Generation Firewall (NGFW) applications that require Deep Packet Inspection (DPI) and network virtualization functionality. As part of ADLINK’s new Modular Industrial Cloud Architecture (MICA) platform, the CSA-7400 offers additional options for configuration, giving OEMs and system integrators faster development and a better cost-performance ratio. With the MICA platform, computing, storage, and I/O resources are modularized for flexibility, and then recombined as needed for a specific application. (+)

      Features:

      342280136871658800.jpg
      • Supports four single-system dual Intel® Xeon® processors E5 compute nodes (MCN-2600)
      • Dual redundant switch modules provide 40G internal links to each compute node, and 360G uplinks
      • Support for hardware-based acceleration for processing Network Virtualization using Generic Routing Encapsulation (NVGRE) and Virtual Extensible LAN (VXLAN), assisting the construction of large layer 2 networks in the cloud
  • SIE Computing Solutions, Inc.  (9)
    • 5359 Series
      FabricPac SM CompactPCI 2.16 compliant switch fabric platform (+)

      Features:

      32718.jpg
      • Currently in-stock for fast shipping
      • RoHS Level 5- and NEBS Level 3-compliant
      • Two redundant IPMI system management cards supporting single or dual system manager operation
    • CG Mupac CompactPCI Backplanes
      Two to 16 Slots Standard Two to 21 Slots Custom (+)

      Features:

      • 6U or 7U Format
      • 64 Bit Operation
      • 5 V/3.3 V Supported
    • CSBC 1200 Series
      Intel Pentium III or Celeron Processor with on-die 256KB or 128KB L2 Cache (+)

      Features:

      • Intel 82440BX AGP chipset
      • Up to 768MB SDRAM, ECC Level 2
      • Dual PCI 10Base-T/100Base-TX Ethernet Controllers
    • 582 Series 1U 2 Slot or 2U 4 Slot cPCI Enclosure
      A 1U, rackmount platform for internet/intranet data networking applications (+)

      Features:

      14142.jpg
      • 1.75”H x 17”W x 12.5”D
      • two-slot 6U x 160mm/6U x 80mm IEEE 1101.10/1101.11-compliant CompactPCI subrack
      • Two-slot CompactPCI backplane which is Basic hot-swap compliant, H.110 compliant, and PICMG 2.9 IPMI compliant
    • 544 Series 5U
      AdvancedTCA Shelf System (+)

      Features:

      24359.jpg
      • Supports up to five slots at 30 mm pitch front and rear with a five slot high-performance backplane configured as a 3X replicated full mesh extended fabric topology to maximize the platform's bandwidth
      • Front accessible cooling modules to optimize power dissipation and height requirements while minimizing MTTR
      • High performance thermal management systems contained within the 544 Series are configured in push pull orientation, providing the required airflow to cool 200 watts front side and 30 watts back side
    • 535 Series
      Redundant IPMI System Manager (+)

      Features:

      35873.jpg
      • CompactPCI 2.16 Fabric Backplane with two Fabric Switch Slots and legacy 64-bit /33 MHz Bus
      • RoHS and NEBS Level 3 Compliant
      • Hot Swap 400 or 600 watt Power Supply
    • 6862 Series 1U MicroTCA Starter Kit
      A complete AdvancedMC and MicroTCA development system that provides engineers with a cost-effective tool to aid in the design, development, and test of AdvancedMCs and MicroTCA systems (+)

      Features:

      • 1.75-inch (1U) (H) x 10.3-inch (W) x 7.7-inch (D)
      • MicroTCA backplane supports AMC.0, AMC.1, AMC.2, AMC.3, AMC.4
      • IPMI system manager creates a MicroTCA-like environment
    • 633 Series
      13U AdvancedTCA system (+)

      Features:

      33709.jpg
      • Designed to address demanding power requirements, thermal management challenges, and Network Equipment Building System (NEBS) requirements of the telecommunications, enterprise, and datacom marketplaces
      • Designed to meet the PICMG 3.0 AdvancedTCA specification, the 633 Series is available with a 14-slot Dual Star or Full Mesh backplane topology
      • Unique dual-redundant Pigeon Point Systems shelf management modules are located in the chassis' rear panel slot
    • 533 Series 13U
      AdvancedTCA Shelf System (+)

      Features:

      24360.jpg
      • Supports up to 14 slots at 30 mm pitch front and rear with either dual star or full mesh backplanes
      • Configured as a 3X Replicated full mesh extended fabric topology to maximize the platforms bandwidth
      • Front accessible cooling modules to optimize power dissipation and height requirements while minimizing MTTR
  • I-Bus Corporation  (5)
    • IBC2501
      A chassis management controller (+)

      Features:

      16637.jpg
      • 6U CompactPCI rear I/O form factor
      • Hot-plug 2mm metric connector
      • Fully PICMG 2.9 R1.0 IPMI compliant
    • 8U CHS
      An 8U, CompactPCI, PICMG 2.16-compliant, 8+8+2-slot split backplane, NEBS compute farm platform (+)

      Features:

      • 2 to 16 UltraSPARC IIe long life cycle single board computers
      • Two industry-standard PICMG 2.16 Layer 3 managed switches
      • Optional fully IPMI compliant system management controller and baseboard management controller/peripheral management controller with SNMP software options
    • 8U CHP
      An 8U, PICMG 2.16-compliant, 8+8+2-slot split backplane, CompactPCI NEBS compute farm platform (+)

      Features:

      14522.jpg
      • 4 to 16 I-Bus IBC2800x long life cycle single board computers
      • Two industry-standarn PICMG 2.16 Layer 3 managed switches
      • Fully IPMI compliant system management controller with SNMP software options
    • nFUZION-8U/CHP
      A CompactPCI, dual Pentium III-based NEBS compute platform (+)

      Features:

      • Suitable for server farms, render farms, content-on-demand platforms, and voice services platforms
      • PICMG 2.16 compliant
      • Red Hat Linux and Windows 2000 operating system support
    • C0814
      A 8U CompactPCI enclosure (+)

      Features:

      11270.jpg
      • Up to 14 hot-swap SBCs, four hot-swap SCA SCSI hard drives, and four 200W hot-swap power supplies
      • NEBS compliant
      • Includes three individually hot-swappable blowers and a hot-swappable fan array in a redundant push-pull configuration
  • Mercury Systems  (8)
    • Ensemble MPC-102
      The Ensemble MPC-102 Dual-Core 8641D AMC Module combines dual-core processing power and flexible I/O for AdvancedTCA and MicroTCA (µTCA) platforms (+)

      Features:

      34139.jpg
      • Dual-core Freescale MPC8641D processor running at up to 1.33 GHz, combined with memory and I/O options for maximum application flexibility
      • Single-width AdvancedMC, either mid-height or full-height, differing only by faceplate
      • Includes an IPMI controller, firmware, and IPMI links for chassis management-based control and configuration
    • Ensemble BCC-101
      10 Gbps Serial RapidIO application deployment (+)

      Features:

      32465.jpg
      • 2-, 5-, and 14-slot AdvancedTCA chassis options
      • Dual 8-port Serial RapidIO switches
      • 4 full-height RapidIO-enabled AdvancedMC bays
    • Ensemble MPQ-101
      Serial RapidIO PowerQUICC III AMC Module (+)

      Features:

      34736.jpg
      • Exceptionally powerful processing and Serial RapidIO connectivity
      • Onboard Freescale MPC8548E PowerQUICC III processor running at up to 1.3 GHz
      • Single-width, full-height AMC
    • Ensemble MTI-104
      Full-height AdvancedTCA AMC module designed for application development on four Texas Instruments TCI6482 RapidIO DSPs (+)

      Features:

      34735.jpg
      • Application developers can optimize application code with the Quad TI DSP AMC module and get to market faster
      • Advanced performance for baseband development applications, with robust application development infrastructure
      • 4 TI RapidIO DSPs operating at 850 MHz core frequency
    • Ensemble HCD3210
      The EnsembleTM 3000 Series HCD3210 3U OpenVPXTM Processing Module from Mercury Computer Systems is a single-slot solution for data acquisition and processing (+)

      Features:

      52884.jpg
      • General-purpose processing via dual-core MPC8640D processor running at 1.06 GHz, supported 1 GB of DDR2 SDRAM
      • Xilinx® VirtexTM-6 FPGA supported by two 9-MB banks of QDRII SRAM and 128 MB of DDR3-900M SDRAM
      • High-bandwidth communications, including native support for RapidIO and PCI Express® (PCIe)
    • Ensemble SFM3010
      The EnsembleTM 3000 Series SFM3010 3U OpenVPXTM Switch Fabric Module from Mercury Computer Systems combines Serial RapidIO® data-plane switching with a managed Gigabit Ethernet control-plane switch for maximum scalability (+)

      Features:

      52883.jpg
      • Control plane communications supported by a Broadcom Gigabit Ethernet switch with integrated MIPS processor core
      • Data plane communications supported by a Tundra Serial RapidIO switch with six 4x links to the backplane and two 4x links to the J15 XMC connector
      • XMC site supported by Serial RapidIO per VITA 42.2
    • Ensemble 3000 Series 3U VPX System
      A 3U VPX system suitable for use in applications with SWaP limitations (+)

      Features:

      42430.jpg
      • Supplies advanced levels of computing to small sensor platforms operating in difficult conditions
      • Comprised of three module types: system controller hub (SCH), data plane switch (DPS), and payload modules, which can include processing modules, I/O, carriers, or combinations of both
      • Three types of independent planes: a GbE control plane, IPMI-based management plane, and high-bandwidth data planes for direct support of multistage processing
    • Ensemble 3000 Series OpenVPX System
      The Ensemble 3000 Series OpenVPX System delivers high-density, high-performance real-time processing in a 3U form factor, suitable for use in applications with space, weight, and power (SWaP) limitations (+)

      Features:

      44277.jpg
      • Ensemble 3000 Series solutions can supply advanced levels of computing to small sensor platforms operating in difficult conditions
      • Comprised of three module types: system controller hub (SCH), data plane switch (DPS), and payload modules, which can include processing modules, I/O, carriers, or combinations of both
      • Five types of independent planes: IPMI-based system management plane, GbE control plane, high-bandwidth data plane for direct support of multistage processing, sensor plane with associated sensor control-plane interface, and daisy-chain expansion plane
  • American Megatrends  (5)
    • Series 906
      A six Ultra320-slot, single-channel IPMI backplane with clustering support (+)

      Features:

      • Auto termination
      • Six Ultra320 or Ultra160 slots
      • Single-channel
    • AMI ATCA Solutions
      MegaRAC AdvancedTCA management firmware (+)

      Features:

      • Built on the MegaRAC-PM IPMI 2.0 stack, widely tested and utilized by first-tier and embedded OEMs
      • Extensible, portable, and easy to deploy
      • Supports Event Generation and Reception, FRU State Maintenance, Redundant IPMB-0 Bus, E-Keying, and IPMC Commands
    • IPMI Firmware
      IPMI server management firmware for server and embedded motherboards (+)

      Features:

      • Enables system administrators to remotely control a server system, even while it is in a non-operational state, performing fucntions such as: viewing and setting thresholds for individual health parameters, including voltage, temperature and fans, and monitoring of the chassis subsystems; Managing sensors and field-replaceable units; Remote control and auto server recovery capabilities, using a watchdog timer; Remotely launch diagnostic/recovery services; Perfrom a system reset and power cycle; Flash the BIOS [...]
    • AMIBIOS8
      Scalable BIOS solutions from embedded computing platforms to mission-critical servers (+)

      Features:

      • Uses Visual eBIOS (VeB), a Windows-based development environment that reduces the engineering resources required to build a customized BIOS solution
      • Modular components, called eModules, can be added to an AMIBIOS project or removed without breaking the BIOS
      • Flexible architecture for embedded and non-traditional computers that do not require a full-featured PC BIOS
    • MegaRAC G2
      100 percent out-of-band connectivity with high-speed video redirection (+)

      Features:

      • Half-sized PCI form factor plugs into any PCI slot
      • Remote client software based on industry standard Web browser (JavaScript 1.2 Capable) with SSL v3 for secure connection
      • Virtual CD support allows remote diagnostics and emergency software/OS installation
  • Degree Controls, Inc.  (2)
    • ProntoFlow Control-ATCA: Intelligent Fan Controller
      Real-time, IPMI-based selection of several fan control modes for synchronized, closed loop RPM control of 48 V fans (+)

      Features:

      30211.jpg
      • IPMI-based reconfiguration of alarm thresholds, fan control curve set points, and access to fan speeds and much more
      • Private, I2C based communication bus between fan trays for chassis that contain multiple fan trays
      • Fire response functionality to either reduce or increase fan speed, depending on chassis architecture needs
    • ATCA Compliant Fan Controller
      AdvancedTCA compliant, dual IPMI-bus fantray controller (+)

      Features:

      22346.jpg
      • Hot swappable
      • Intelligent FRU
      • Real time, IPMI based selection of several fan control modes for synchronized, closed loop RPM control of fans, using any combination of inlet/exhaust or blade sensed temperatures
  • Pigeon Point Systems  (1)
    • IPM Sentry BMR-AVR-ATCA Starter Kit
      All mandatory and many optional IPMI/ATCA commands supported over IPMB-0 (+)

      Features:

      • Numerous PPS extension commands, primarily used over the payload and debug serial interfaces
      • Serial interface protocol based on IPMI Terminal Mode
      • Payload alert notifications over payload interface for sensor events and receipt of reset/shutdown commands
  • Artesyn Embedded Technologies  (8)
    • SpiderWareM3
      Remote monitoring of multiple IPMI MicroTCA and AdvancedTCA platforms (+)

      Features:

      30780.jpg
      • Automated acquisition and update of IPMI information from AMC modules
      • Intelligent Alarm monitoring and prioritization
      • Sensor Threshold setting
    • MATXM-CORE-411-B
      The MCH-1011/1021 MicroTCA Carrier Hub is a full-size module designed to fit into the MCH slot of MicroTCA platforms (+)

      Features:

      44428.jpg
      • SpiderWareM3 platform management software
      • Layer 2 unmanaged (or externally managed) Gigabit Ethernet switching to each of 12 payload slots
      • Two Gigabit Ethernet fabric expansion/uplink RJ-45 face plate connections
    • AMC-9210 AMC Module
      AdvancedMC module based on the Cavium OCTEON Plus multi-core processor architecture has high-performance packet processing for broadband networks (+)

      Features:

      38312.jpg
      • AMC.0 R2.0 mid-size and full-size AdvancedMC module
      • Cavium Networks high-performance OCTEON Plus CN58xx family of packet processors
      • Quad GbE (AMC.2) plus PCI Express (AMC.1) to carrier
    • CompactPCI Processor Blades
      Intel architecture and PowerPC processor blades optimized for performance, power, and features (+)

      Features:

      20496.jpg
      • Universal mode system- or peripheral-slot functionality
      • IPMI system management support (PICMG 2.9)
      • CompactPCI Packet Switching Backplane compliant (PICMG 2.16)
    • MCH-1011/1021
      MicroTCA Carrier Hub (MCH) modules (+)

      Features:

      43069.jpg
      • Include Layer 2 Gigabit Ethernet, SpiderWareM3 management software and optional PCI Express fabric switch
      • Full-size module designed to fit into MCH slot of MicroTCA platforms
      • SpiderWareM3 platform management software
    • MicroTCA
      MicroTCA is an open system-level specification targeted for telecom and enterprise applications where smaller system form factor is required (+)

      Features:

      32057.jpg
      • Open Frame 19: rack mount chassis with tabletop cabinet
      • 12 single-wide content slots with a combination of 6 full height and 6 half-height AdvancedMC modules or 9 full height AdvancedMC modules
      • MicroTCA Carrier Hub (MCH) module with dual front panel 10/100/100 Ethernet ports
    • CPCI-7145 Processor Board
      High performance CompactPCI processor board (+)

      Features:

      32568.jpg
      • 1.8 and 1.6 GHz Intel Pentium M processor
      • 400 MHz front-side bus
      • Intel E7501 dual-channel, 3.2 Gbps memory controller
    • CPCI-6190 Processor Board
      A universal-mode single-board computer (+)

      Features:

      32570.jpg
      • PowerPC 750GX processor with core frequency of 733 MHz or 1 GHz/1 MB L2 cache
      • Discovery GT-64260 system controller – five decoupled buses for concurrent processor/PCI peripheral device access to main memory
      • Sentinel universal-mode PCI-to-PCI bridge enables SBCs to switch between system- and peripheral-slot functionality
  • Inova Computers, Inc.  (1)
    • SYSC-GR [GoldRush]
      First complete 4U CompactPCI Express System (+)

      Features:

      32720.jpg
      • 84HP, 4U EMI Shielded Chassis
      • Mounting brackets and handles on the front
      • 4x 80 mm fans for active cooling
  • Electronic Solutions  (1)
    • Ventus AdvancedTCA 014/016 Shelf
      Backplane with dual star base and fabric design using standard technology FR-4 material (+)

      Features:

      20416.jpg
      • Backplane testing shows excellent performance at 3.125 Gbps with margin beyond 4 Gbps
      • 2800 W (14 slot) and 3200 W (16-slot) AdvancedTCA blade payload capacity power and cooling
      • Pluggable IPMI enabled power entry modules for low MTTR and ease of maintenance
  • SMART Modular Technologies  (3)
    • EA8R Bladepak
      First in its class of carrier-grade storage blades, the EA8R provides sophisticated Adtron SmartStorage architecture and incorporates Adtron ActiveRAID in a standard Advanced Telecommunications Computing Architecture (AdvancedTCA) form factor (+)

      Features:

      29662.jpg
      • Adtron ActiveRAID Technology provides RAID-0 or RAID-5 capabilities
      • Using iSCSI over high speed GbE interface with the well-established SCSI command set permits the ability to manage data storage and retrieval with support for multiple hosts
      • Dual GbE Interface: Shelf redundancy; redundant ports on the backplane provide two paths to the storage blade
    • IC6MB
      A mirrored-disk, mass storage subsystem for high-availability telecommunications platforms, network routers, and military and industrial control systems (+)

      Features:

      17691.jpg
      • Integrates two disk drives in a hot-swappable redundant array
      • Single-slot, 6U, CompactPCI plug-in card
      • Integrated IPMI controller communicates drive status to the baseboard management controller
    • SC6M
      A mirrored-disk, mass-storage subsystem for high-availability telecommunications platforms, network routers, and military and industrial control systems (+)

      Features:

      17692.jpg
      • Integrates two disk drives in a hot-swappable redundant array
      • Single-slot, 6U, CompactPCI plug-in card
      • Integrated IPMI controller communicates drive status to the baseboard management controller
07/3/22 15:42
Close

Subscribe to AdvancedTCA updates