ATCA-9112 40G Switch Blade with AMC slot The ATCA-9112 switch blade provides 10/40GbE switching for up to 16 slots and 8 front panel uplinks with a 640Gbps non-blocking fabric switch from Broadcom. Designed for network security, LTE and DPI-centric applications, the ATCA-9112 offers the highest aggregate switching bandwidth within an ATCA chassis, enabling support for up to 16-slot systems. A Broadcom BCM56846 ensures seamless integration through open standard hardware supporting 40GbE or 10GbE ATCA node blades. A Broadcom BCM56321 provides ATCA base interface connectivity. The switch offers a flexible approach to hub blade functionality via a mid-size AMC site to host control plane, application processing, acceleration or offload functions. Advantech’s Freescale P4080-based AMC-4201 or x86-based MIC 5603 PrAMC can be used to consolidate processing requirements. MIC-5603 Processor AMC The MIC-5603 is a single-width mid-size processor AMC. Its design is based on 3rd generation Intel® Core™ processors in a BGA package combined with the Intel® QM67 chipset. The card supports processors with integrated memory and graphics controllers, and a maximum L3 cache of 4MB. It can support up to 8GB, dual-channel, on-board DDR3 memory with ECC at 1600 MHz, making it ideal for switching applications requiring low latency and reliable memory access. A standard feature, external Ethernet connectivity is provided on two dedicated GbE front panel ports, one each from the Intel® QM67 PCH and the onboard Intel® 82580 quad port LAN controller, which also provides two additional GbE ports to the AMC base fabric. The Intel® PCH brings remote management capabilities with KVM-over-LAN, and introduces faster I/O than previous generation designs with SATA-III to AMC ports 2..3 and PCIe x4 gen.2 to ports 4..7. This module can also be configured to boot from the network, local CFast compact flash or flash disk, or external storage media such as HDD or USB drives. AMC-4201 Processor AMC The AMC-4201 is a single-width, mid-size AMC based on the Freescale P4080 processor. It combines eight Power Architecture® e500-mc Cores operating at frequencies up to 1.5 GHz with high-performance, datapath acceleration logic, extensive networking I/O, and peripheral bus interfaces. It combines powerful multicore Power Architecture performance with network processing capabilities, and builds on the communications ubiquity of Freescale’s QorIQ® product family. AMC-4201 provides 4 and 8 GB build options for onboard DDR3 memory at 1333 MHz with ECC support. One front-panel 10GbE SFP+ connector provides network access in addition to a front panel console and debug port. The unique SERDES design supports up to four different AMC port configurations for a mix of SRIO, PCIe, XAUI and SGMII channels. This makes the AMC extremely versatile and caters to a wider range of MicroTCA or ATCA Carrier topologies beyond just telecom applications. 4 MB SPI Flash and 2 GB NAND Flash provide onboard options for software and storage. The AMC also provides 8 KHz and 19.44 MHz telecom clock synchronization support. FEATURES: ››40GbE switch blade provides 10/40GbE switching for up to slots ››10/40GE fabric interface with eight 10GE uplinks ››Fabric interface bandwidth up to 640Gbps ››Separate base and fabric interface switching for enhanced security and protection ››Mid-size AMC site for host application processing, acceleration or offload functions [...] (+)