AdvancedTCA

Showing results for: advanced telecom computing architecture
Refine AdvancedTCA companies and products:
advancedtca 40 gbps advancedtca carrier blade advancedtca anniversary advancedtca specification picmg advancedtca 2011 advancedtca 40g xtca advancedtca architecture advancedtca 10 gbe advancedtca servers advancedtca blades long term evolution advancedtca all-ip advancedtca slots ipmi advancedtca advancedtca extensions advancedtca chassis advanced telecom computing architecture picmg advancedtca joe pavlat atca
Click on any vendor
to see a listing of
advanced telecom computing architecture related products.
  • Telco Systems  (1)
    • T-HUB4
      40G ATCA switch blade to enable next generation mobile applications such as LTE and 4G as well as metro Ethernet, security, and military applications that require high performance and high availability (+)

      Features:

      • Telco Systems' T-HUB4 delivers simultaneous 10G and 40G connectivity to support AdvancedTCA service modules
      • T-HUB4 delivers an extensive networking software suite, BiNOX to provide state of the art connectivity, including switching, IPv4/IPv6 routing, MPLS, QoS, protection and redundancy, and clock synchronization to the ATCA platform
      • BiNOX is Telco Systems' field-proven, carrier grade networking operating system offering superior control and security while delivering wire speed Layer 2-4 networking
  • NEI  (3)
    • A-5000 ATCA System
      A standards-based high-reliability server featuring superior performance, advanced I/O capacity, and easy manageability (+)

      Features:

      34755.jpg
      • 5-slot AdvancedTCA system with full-mesh topology for 3.125 Gbps throughout
      • Three node slots available for AdvancedTCA single board computers, or other AdvancedTCA blades
      • Dual 16-port ZNYX PICMG 3.0 GbE base fabric switches and dual Intel Shelf Managers
    • A-13000 ATCA System
      NEI's A-5000 and A-13000 carrier-grade AdvancedTCA platforms offer customers a standardized architecture for next-generation communications applications (+)

      Features:

      34760.jpg
      • These products have passed rigorous testing required by today's telecommunication organizations
      • NEI AdvancedTCA systems offer scalability and greater than 5-nines (99.999%) availability
      • With standardized packet-switched backplane topologies, node-based switching for board communications and centralized management with IPMI, the NEI A-Series family is the right architecture for carrier-grade next-generation communication applications
    • MMP for ATCA
      Dialogic Multimedia Platform for AdvancedTCA (+)

      Features:

      33776.jpg
      • Supports multimedia processing and includes voice, conferencing
      • Supports 250 to 500 universal ports with audio transcoding
      • Supports a variety of low-bit-rate and wireless coders
  • Nortel  (1)
    • GSM-UMTS Mobile Switching Center Server
      3GPP R4 BICN VoIP support (+)

      Features:

      • All-IP network consolidation with full support of VoIP for GSM and UMTS bearers and integrated SIGTRAN
      • IP-only industrial computer based soft-switch technology
      • High Density starting from 1 Million BHCA per equipment shelf
  • Intel  (3)
    • NetStructure MPCBL0040
      A single board computer that is part of a series of high-compute boards introducing powerful multicore architecture compliant with the Advanced Telecom Computing Architecture (AdvancedTCA) specification (+)

      Features:

      • Performance boost from multicore processor technology enables superior subsystem scalability and greater density
      • More subscribers/transactions per board allow more network elements in an AdvancedTCA chassis, improving system scalability
      • Intel® E7520 chipset provides direct connection between the MCH, PCI Express component, and AdvancedMC modules
    • MPCHC0001
      14U shelf, compliant with AdvancedTCA specifications (+)

      Features:

      • Achieves high availability
      • Redundant –48 VDC power
      • Redundant management modules
    • MPCHC0001 14U Shelf
      14U shelf (+)

      Features:

      • Compliant with AdvancedTCA specifications
      • Redundant –48 VDC power
      • Redundant management modules
  • GoAhead Software  (2)
    • GoAhead SelfReliant 4.0
      Integrate the HA Middleware with hardware and software commonly used to create embedded solutions (+)

      Features:

      • SelfReliant 4.0 supports a variety of leading Advanced Telecom Computing Architecture (AdvancedTCA) platforms including Intel's NetStructure Chassis, Kontron's VHDS, Motorola's EndurX platform, RadiSys Promentum, HP's Advanced Open Telecom Platform as well as PICMG 2.16 platforms, and PCI platforms such as the Augmentix A+ series
      • Provides integration with leading in-memory databases such as TimesTen's Data Server
      • SelfReliant MIB accessible via SNMP
    • SelfReliant 4.0
      Supports AdvancedTCA platforms including Intel's NetStructure Chassis, Kontron's VHDS, Motorola's EndurX platform, Radisys' Promentum, and HP's Advanced Open Telecom Platform (+)

      Features:

      21497.jpg
      • Includes support for PICMG 2.16 platforms and PCI platforms such as the Augmentix A+ series
      • Supports RAID-1 running on the Linux md (multiple device) driver
      • SelfReliant MIB accessible via SNMP
  • UXComm  (1)
    • ATCA Solution 1.0 - ATCA Management Software
      Integration-ready software platform for AdvancedTCA system management (+)

      Features:

      21830.jpg
      • Discover - discover servers and AdvancedTCA Chassis Management Modules (CMM)
      • Monitor: customized displays for AdvancedTCA chassis inventory
      • Detect and Alert: send notification through SNMP and e-mail for thresholded events
  • Carlo Gavazzi Computing Solutions  (3)
    • ATCA Starter Kit
      A complete AdvancedTCA development system (+)

      Features:

      • Available with a six slot, full mesh backplane that supports the AdvancedTCA PICMG 3.0, 3.1, 3.2, 3.3, 3.4, and 3.5 specifications
      • Supports AdvancedTCA hardware and software testing and development
      • Can be used as a system for proof of concept and customer demonstrations
    • AdvancedTCA Filler Panels
      8U x 6HP form factor (+)

      Features:

      • EMI gasket provided [...]
    • 13U ATCA Systems
      Suitable for the high-reliability, robust power requirements, thermal management demands, and NEBS needs of the telecommunications, enterprise, and datacom marketplace (+)

      Features:

      • 22.75" (13U) (H) x 17.2" (W) x 17.7"(D)
      • Available with a 14 slot dual star or full mesh backplane
      • Front removable push pull intelligent cooling system that provides redundant cooling for 200 watts front side and 30 watts back side per slot
  • dasan networks  (2)
    • A1200
      DASAN Networks’ A1200 is a single slot Advanced Telecom Computing Architecture (ATCA) packet processing module/blade compliant with PICMG 3.0/3.1 (Option 1 & 9) and PICMG 3.1 R2 (TBD) interface specification. It is ideal for dual-star and full-mesh configurations in 14 slot (EIA cabinet) and 16 slot (ETSI cabinet) systems, it also provides Rear Transition Module (RTM) for fabric and base interface extension. (+)

      Features:

      188954934121124158.jpg
      • PICMG 3.0 compliant base interface switch / PICMG 3.1, Option 1,9 fabric interface switch (1G/10G)
      • PICMG 3.1 R2 (TBD) fabric interface switch (40G)
      • Front Interface : 4 x 1G/10G SFP+ (Base Interface) / 4 x 1G/10G SFP+ (Fabric Interface) / 2 x 40G QSFP (Fabric Interface)
    • A1100
      DASAN Networks’ A1100 is a single slot Advanced Telecom Computing Architecture (ATCA) packet processing module/blade compliant with PICMG 3.0/ 3.1 (Option 1 & 9) interface specification. It is ideal for dual-star and full-mesh configura-tions in 14 slot (EIA cabinet) and 16 slot (ETSI cabinet) systems, it also provides Rear Transition Module (RTM) for fabric and base interface extension. (+)

      Features:

      188951784121124158.jpg
      • PICMG 3.0 compliant base interface switch / PICMG 3.1, Option 1,9 fabric interface switch (1G/10G)
      • Front Interface : 4 x 1G/10G SFP+ (Base Interface) / 4 x 1G/10G SFP+ (Fabric Interface)
      • Rear Transition Module (RTM) Interface : 4 x 1G/10G SFP+ (Fabric Interface) / 2 x 1G SFP (Base Interface) / 4 x SSU/BITS, RJ45
  • TeraChip, Inc.  (1)
    • 160 Gbps ATCA Switch Fabric Card
      The TeraChip TSC-160XUI-A1 is an operational 160 Gbps switch fabric card for standard AdvancedTCA chassis, offering the low risk, simplicity and scalability of AdvancedTCA standard devices (+)

      Features:

      18710.jpg
      • Designed for switch vendors serving the enterprise (LAN), storage (SAN), and metro (MAN) markets
      • The TSC-160XUI-A1 is based on TeraChip's TCF16X10 scalable single-chip switch fabric device, capable of switching data streams of 10 Gbps using a shared-memory architecture that supports: 16 slots of 10Gbps per slot
      • 8 priority queues per port
  • Polaris Networks  (1)
    • xTCA Test Tools
      Conformance test tools for AdvancedTCA, MicroTCA, and AdvancedMC technologies to assist TEM and system integrators in testing interoperability of building blocks and reduce development and integration time (+)

      Features:

      • Test cases as per PICMG specification requirement
      • The testers have been selected by CP-TA for certification testing
      • Stop or continue on error/warning/info
  • SIE Computing Solutions, Inc.  (14)
    • 646 2-Slot
      3U, 2-slot AdvancedTCA system offering flexible power options in a tightly integrated system for maximum flexibility in a range of communications applications (+)

      Features:

      35258.jpg
      • The Field Replaceable Units (FRUs) of the 646 2-slot AdvancedTCA system feature dual redundant AC and DC power inputs at 600 W
      • The system's thermal management provides high pressure, high flow rate axial fans used in a separated push-push configuration for cooling more than 250 W per slot
      • The rear thermal management has the capability to cool 30 W per slot
    • 6861000-01
      An AdvancedTCA development system (+)

      Features:

      17490.jpg
      • Available with a six-slot, Full Mesh backplane that supports the AdvancedTCA PICMG 3.1, 3.2, and 3.3 specifications
      • Removable fan tray provides evacuation style cooling to all the card slots
      • Optional rear-mounted AC power supply provides –48VDC A&B, which eliminates the need for an external –48VDC converter
    • 633 Series
      13U AdvancedTCA system (+)

      Features:

      33709.jpg
      • Designed to address demanding power requirements, thermal management challenges, and Network Equipment Building System (NEBS) requirements of the telecommunications, enterprise, and datacom marketplaces
      • Designed to meet the PICMG 3.0 AdvancedTCA specification, the 633 Series is available with a 14-slot Dual Star or Full Mesh backplane topology
      • Unique dual-redundant Pigeon Point Systems shelf management modules are located in the chassis' rear panel slot
    • SMM04 4U ATCA Shelf Management Modules
      AdvancedTCA compliant ShMM (+)

      Features:

      21955.jpg
      • Designed for Carlo Gavazzi's 14 slot Dual Star and Full Mesh backplanes with SMM04 ShMM Slot [...]
    • SMM08 8U ATCA Shelf Management Modules
      AdvancedTCA compliant ShMM (+)

      Features:

      21956.jpg
      • Plugs directly in to Zone 1 connector and can be used in any AdvancedTCA slot
      • Compatible with all Carlo Gavazzi Full Mesh backplanes
      • One slot wide
    • 6861000-01 Model ATCA Development System
      8.75" (5U) H x 17" W x 15.2" D (+)

      Features:

      19083.jpg
      • 19" Rackmount Input Power
      • Dual 36 – 72VDC Input
      • 48 VDC wired to backplane
    • 543 Series
      A PICMG 3.0-compliant AdvancedTCA development system (+)

      Features:

      15497.jpg
      • Available with a two to six-slot full-mesh backplane that supports the AdvancedTCA PICMG 3.1, 3.2, and 3.3 specifications
      • Removable fan tray provides evacuation-style cooling to all card slots
      • Optional rear-mounted AC power supply that provides -48VDC A&B, which eliminates the need for an external -48VDC converter
    • PICMG 2.16/2.17 and AdvancedTCA Backplanes
      Eight slots standard (+)

      Features:

      • Two- to 21-slot custom configurations available
      • 6U and 7U format
      • 64-bit operation
    • AdvancedTCA Air Impedance Modules
      PICMG 3.0 (+)

      Features:

      • 8U x 6HP Form factor
      • 280mm depth
      • 6061-T6 Aluminum extruded front panel
    • 500 Series
      Enhanced CompactPCI/VME enclosures for industrial and telecom computing systems (+)

      Features:

      33267.jpg
      • Durable and versatile open architecture
      • Available through unique "Quick-Turn" program; delivered within two weeks
      • Designed to meet VITA and PICMG backplane specifications
    • AdvancedTCA Backplane
      Backplane topologies for Dual Star and Full Mesh (+)

      Features:

      • 2 to 16 slots customizable
      • Backplanes for all topologies
      • 2, 6, and 14 slot backplanes [...]
    • AdvancedTCA Front Panel Kit
      8U x 6HP form factor front panel hardware (+)

      Features:

      • 6061-T6 aluminum extrusion
      • EMI gasket provided
      • Inserter/ejector compliant to IEEE-1101.10
    • PICMG 3.0
      Chassis dimensions 11U or 12U x 18.70” (D) x 17.00” or 19.00” (w) (+)

      Features:

      • Two to four fans
      • Subrack is IEEE 1101.10 compliant
      • 14 slot 8U x 280mm x 6HP subrack
    • AdvancedTCA Air Slot Blockers
      A CG Mupac 533 series chassis accessory (+)

      Features:

      • All customizable air flow
      • Blocking or metering air flow specifically to card set. Attaches to the lower sub-rack extrusions of the 533 chassis
      • Enhances EMI shielding
  • Astute Networks  (1)
  • SOUTHCO  (3)
    • ADVANCED-TCA Faceplate Mounting Hardware
      Ejector handles (+)

      Features:

      21498.jpg
      • Safety ground pins
      • ATCA-compliant captive retention screws
      • Meet all requirements of the AdvancedTCA PICMG 3.0 R2.0 standards for faceplate mounting and fastening
    • P7 - ATCA Compliant Faceplate Mounting Hardware
      Here is a fully compliant single-source solution that makes it easy to meet the Advanced TCA PICMG 3.0 R2.0 specifications for faceplate mounting in telecom computer-rack-system installations. As a bonus, bundled pricing is available for users who purchase the complete solution. (+)

      Features:

      293460955861869783.jpg
      • Ergonomic inject/eject lever designed for easy operation has aesthetically pleasing design that takes up minimal real estate on the faceplate
      • Secondary catch on inject/eject lever operates microswitch to permit hot-swapping
      • Hardened captive screws with #2 Phillips headstyle also feature knurled knobs for easy hand assembly
    • Flush Mount AdvancedMC Module Handle
      Microswitch protection against short-circuits during modular board hot-swapping in network, telecom, and general computing applications (+)

      Features:

      37286.jpg
      • Minimizes protrusion on the front of the module faceplate
      • Satisfies all requirements of the PICMG AMC.0 R2.0 standard
      • Designed to align neatly with the faceplate for better appearance and to prevent potential snagging of cables in use [...]
  • Artesyn Embedded Technologies  (15 of 32)
    • ATCA-F140
      40G AdvancedTCA switch blade, the ATCA-F140 (+)

      Features:

      • The new 40G switch blade offers telecom equipment manufacturers a powerful combination of high bandwidth, high performance and maximum flexibility to help them drive the successful implementation of next-generation networks
      • The ATCA-F140 provides 1G, 10G and 40G fabric switching interfaces for backwards compatibility with a customer's existing payload blades, while enabling the maximum ATCA fabric bandwidth to meet the needs of the most data-intensive applications, including 4G Long Term Evolution (LTE) networks
      • The availability of a 40G switch blade is the next step in bringing the benefits of ATCA to more applications, especially those in the data plane
    • ATCA-8320 Media Processing Blade
      The Artesyn Embedded Technologies ATCA-8320 is a DSP-based media processing blade for use in AdvancedTCA systems. It offers a very high density of IP voice and video transcoding, including H.264 at up to 1080p, for use in communications applications. By employing efficient Octasic OCT2224 Digital Signal Processors (DSPs) to provide the transcoding functions, the ATCA-8320 media processing blade can take the place of many additional server blades when adding voice or video processing to an application. The blade can be used as an offload function for a standard server blade, but can also be used as the basis for a standalone media processing function. In addition to the DSPs, the ATCA-8320 blade features an integrated multicore CPU to provide advanced IP flow management and distribution, and a mobile x86 CPU for local application hosting. This "Gateway on a Blade" architecture allows a high degree of scalability from very small systems up to very large. ATCA-8320 brings multi-core DSPs and the powerful Vocallo MGW voice and video software stacks together with Artesyn's leading ATCA system heritage and thermal design skill. FEATURES: Up to 24 power-efficient Octasic OCT2224M DSPs on two mezzanine sites Comprehensive voice and video processing firmware and programmers interface 8 core Freescale QorIQ P4080 for blade management plus packet processing and load balancing of IP streams Dual core Intel® Core™ i7 processor for local control and management application Local Ethernet switching network with full switch management utilities Rear transition module supports 10G + 4 x 1G Ethernet cable terminations Designed for NEBS Level 3 and ETSI telecom standards compliance in a CP-TA B.4 class enclosure [...] (+)

      Features:

    • ATCA-F125
      10G AdvancedTCA switch blade (+)

      Features:

      47694.jpg
      • Enables network equipment manufacturers to combine many functions on a single blade so that available slots can be filled with revenue-generating application blades
      • Architecture of the ATCA-F125 is complementary to the recently launched 40G ATCA switch blade, the ATCA-F140, allowing a common software environment to be used for both
      • By using compatible 10G and 40G solutions, network equipment manufacturers can migrate applications more easily from one to another, providing unrivalled scalability in both directions for their common platform
    • CPCI7200 CompactPCI dual core processor board
      The CPCI7200 SBC offers high speed, server-class performance for advanced telecom and control plane applications (+)

      Features:

      36476.jpg
      • 1.06 or 1.5 GHz Intel Core2 Duo processor
      • 533 or 667 MHz front side bus
      • Intel E7520 + 6300ESB dual channel 3.2 GBps memory controller
    • ATCA-8320
      The Emerson ATCA-8320 is a DSP-based media processing blade for use in AdvancedTCA systems. It offers a very high density of IP voice and video transcoding, including H.264 at up to 1080p, for use in communications applications.The blade can be used as an offload function for a standard server blade, but can also be used as the basis for a standalone media processing function. In addition to the DSPs, the ATCA-8320 blade features an integrated multicore CPU to provide advanced IP flow management and distribution, and a mobile x86 CPU for local application hosting. (+)

      Features:

      213357981642521195.jpg
      • Up to 24 Octasic OCT2224M DSPs
      • Freescale QorIQ P4080 for blade management, packet processing and load balancing of IP streams
      • Dual core Intel® Coreâ„¢ i7 processor for local control and management application
    • ATCA-7365
      Server blade that delivers a combination of performance and flexibility to help drive the successful implementation of next-generation telecom networks and communication infrastructures (+)

      Features:

      47212.jpg
      • With two 6-core Intel Xeon processors L5638 and 96GB of main memory, the ATCA-7365 processor blade enables best-in-class compute performance in an ATCA form factor
      • The PICMG 3.1 compliant fabric interface provides 10 Gigabit Ethernet (10Gbps) capability for applications requiring higher network throughput in the backplane
      • Multiple network and storage I/O interfaces allow the integration into different network infrastructures such as telecommunication central offices and network data centers
    • ATCA-C121 AdvancedTCA AMC Carrier Blade
      The Emerson Network Power ATCA-C121 is a 10 Gigabit AdvancedTCA AMC carrier blade and is available for the Centellis 4000 series of communications servers (+)

      Features:

      36473.jpg
      • The flexibility of AMC technology provides application developers the ultimate flexibility in defining and allocating compute resources, telecom I/O and network connectivity
      • Modular design – four mid-size, single wide AdvancedMC (AMC) sites
      • Enables scalable and distributed computing
    • ATCA-8310
      Media-gateway-on-a-blade enabler based on AdvancedTCA technology (+)

      Features:

      46600.jpg
      • Includes a DSP array, an Intel Core i7 processor and a Freescale QorIQ P4080 device on the same blade
      • IHighest density of DSPs on a single AdvancedTCA blade
      • Up to 30 Texas Instruments (TI) TMS320TCI6486 devices
    • Centellis 3406 ATCA Communications Server
      AdvancedTCA Communications Server (+)

      Features:

      33059.jpg
      • Fully integrated and verified AdvancedTCA based communications server
      • RoHS (5 of 6) compliant
      • 14-slot, 19", 12.5U form factor
    • Centellis 3600 ATCA Communications Server
      AdvancedTCA Communications Server (+)

      Features:

      33060.jpg
      • Fully integrated and verified AdvancedTCA based communications server
      • RoHS (5 of 6) compliant
      • 16-slot, 23", 12.5U form factor
    • Centellis 4100 ATCA 10GbE Platform
      AdvancedTCA platform (+)

      Features:

      33451.jpg
      • AdvancedTCA shelf to deliver 5-nines availability into central office environments
      • 13U/19" chassis with 14 vertical blade slots
      • Fault-resilient design to minimize hardware induced failures
    • ATCA-7301
      High performance AdvancedTCA processor blade for data and control plane applications (+)

      Features:

      34907.jpg
      • 2.16 GHz Intel Core 2 Duo processor
      • Onboard 24-port Gigabit Ethernet switch
      • AMC.0, AMC.1, and AMC.2 compliant with two mid-size AMC sites
    • ATCA-7221 AdvancedTCA Processor Blade
      High performance processor blade with SMP (+)

      Features:

      32574.jpg
      • RoHS (6 of 6) compliant
      • Dual 2.8 GHz Intel Xeon LV processors
      • Complete software operating environment including OS
    • Centellis 4000 Series ATCA Communications Server
      Series of AdvancedTCA communications servers (+)

      Features:

      33322.jpg
      • Integrate 10 Gbps Ethernet switching, a wide range of payload blades and enabling software
      • Suitable for applications requiring high bandwidth and high performance
      • Portfolio extends from individual blades and modules through fully integrated and validated MicroTCA and AdvancedTCA communications servers [...]
    • Centellis 4620, R1 ATCA 10GbE Communications Server
      "AdvancedTCA panels, handles, and hardware (+)

      Features:

      33053.jpg
      • CompactPCI panels, ejectors, and hardware
      • PMC bezels, gaskets, and filler plates
      • PCI brackets and retainers
  • Advantech Corporation  (2)
    • MIC-3390
      CompactPCI-based high-performance Intel Pentium M single board computer with PCI Express and IPMI 2.0-compliant interface (+)

      Features:

      30060.jpg
      • Suitable for mission critical telecom and data communication applications where high availability is essential
      • 6U CPU board provides telecom equipment manufacturers (TEMs) with increased throughput and improved call-handling capabilities for applications at the edge of the network such as application servers, media gateway controllers, and home location registers
      • High-speed, low-power computing
    • ATCA-9112 40G Switch with Processor AMC Application Blades
      ATCA-9112 40G Switch Blade with AMC slot The ATCA-9112 switch blade provides 10/40GbE switching for up to 16 slots and 8 front panel uplinks with a 640Gbps non-blocking fabric switch from Broadcom. Designed for network security, LTE and DPI-centric applications, the ATCA-9112 offers the highest aggregate switching bandwidth within an ATCA chassis, enabling support for up to 16-slot systems. A Broadcom BCM56846 ensures seamless integration through open standard hardware supporting 40GbE or 10GbE ATCA node blades. A Broadcom BCM56321 provides ATCA base interface connectivity. The switch offers a flexible approach to hub blade functionality via a mid-size AMC site to host control plane, application processing, acceleration or offload functions. Advantech’s Freescale P4080-based AMC-4201 or x86-based MIC 5603 PrAMC can be used to consolidate processing requirements. MIC-5603 Processor AMC The MIC-5603 is a single-width mid-size processor AMC. Its design is based on 3rd generation Intel® Core™ processors in a BGA package combined with the Intel® QM67 chipset. The card supports processors with integrated memory and graphics controllers, and a maximum L3 cache of 4MB. It can support up to 8GB, dual-channel, on-board DDR3 memory with ECC at 1600 MHz, making it ideal for switching applications requiring low latency and reliable memory access. A standard feature, external Ethernet connectivity is provided on two dedicated GbE front panel ports, one each from the Intel® QM67 PCH and the onboard Intel® 82580 quad port LAN controller, which also provides two additional GbE ports to the AMC base fabric. The Intel® PCH brings remote management capabilities with KVM-over-LAN, and introduces faster I/O than previous generation designs with SATA-III to AMC ports 2..3 and PCIe x4 gen.2 to ports 4..7. This module can also be configured to boot from the network, local CFast compact flash or flash disk, or external storage media such as HDD or USB drives. AMC-4201 Processor AMC The AMC-4201 is a single-width, mid-size AMC based on the Freescale P4080 processor. It combines eight Power Architecture® e500-mc Cores operating at frequencies up to 1.5 GHz with high-performance, datapath acceleration logic, extensive networking I/O, and peripheral bus interfaces. It combines powerful multicore Power Architecture performance with network processing capabilities, and builds on the communications ubiquity of Freescale’s QorIQ® product family. AMC-4201 provides 4 and 8 GB build options for onboard DDR3 memory at 1333 MHz with ECC support. One front-panel 10GbE SFP+ connector provides network access in addition to a front panel console and debug port. The unique SERDES design supports up to four different AMC port configurations for a mix of SRIO, PCIe, XAUI and SGMII channels. This makes the AMC extremely versatile and caters to a wider range of MicroTCA or ATCA Carrier topologies beyond just telecom applications. 4 MB SPI Flash and 2 GB NAND Flash provide onboard options for software and storage. The AMC also provides 8 KHz and 19.44 MHz telecom clock synchronization support. FEATURES: ››40GbE switch blade provides 10/40GbE switching for up to slots ››10/40GE fabric interface with eight 10GE uplinks ››Fabric interface bandwidth up to 640Gbps ››Separate base and fabric interface switching for enhanced security and protection ››Mid-size AMC site for host application processing, acceleration or offload functions [...] (+)

      Features:

  • SANBlaze Technology, Inc.  (9)
    • SB-ATCA1020
      The SANBlaze SB-ATCA1020 is an AdvancedTCA carrier board providing in-chassis JBOD expansion to accommodate up to four (4) AMC SAS, SATA or SSD drive modules (+)

      Features:

      45175.jpg
      • The SB-ATCA1020 connects the AMC slots to the RTM via zone-3 connector and conforms to the 3-row Advanced RTM standard
      • The SB-ATCA1020 blade accommodates up to four mid height (MH) modules, wired with AMC.3 storage signaling
      • The configuration permits easy in-chassis JBOD, with present capacity options up to 2 TB (TeraBytes)
    • SB-ATCA1010
      The SANBlaze SB-ATCA1010 is an AdvancedTCA carrier board featuring a 2.5G Hz PCI Express switch, which ties together four front AMC slots with the RTM zone-3 connector (+)

      Features:

      45174.jpg
      • AMC slots are configurable as either upstream or downstream PCIe using a micro DIP located on the blade
      • The SB-ATCA1010 provides the ideal PCIe expansion solution when paired with the SANBlaze SBARTM403P rear transition module
      • The SB-ATCA1010 blade accommodates up to four mid height (MH) modules, and is wired with AMC.1 PCIe signaling
    • SB-ATCA7300
      The SANBlaze SB-ATCA7300 Intel® Architecture server blade offers scalable, high-performance computing power for tasks that store, process and forward large amounts of data. Featuring two 6-core Intel® Xeon® processors, and up to 96GB of DDR3 memory, the SB-ATCA7300 delivers true 64-bit SMP computing for faster application execution in both virtualized and non-virtualized OS environments. Its PICMG® 3.1 compliance provides redundant 10 Gigabit Ethernet (10Gbps) connections that are ideal for pipelined packet processing. (+)

      Features:

      18556106920966366.jpg
      • Dual 10GbE Fabric PICMG 3.1 Option 1,9
      • Two 6-core Intel® XEON® CPU
      • Up to 96GB main memory
    • ATCA-1000
      AdvancedTCA RAID Storage Blade with four AdvancedMC slots, specifically tailored to provide multiprotocol IP storage services within a telecom shelf, including iSCSI, NFS, and CIF (+)

      Features:

      34457.jpg
      • Robust storage centric blade
      • Integrates proven, best-of-breed standard components with optimal thermal and power profiles
      • High availability functions include RAID1/0 implemented in hardware, hot sparing AdvancedMC drives, and redundant 10 Gb fabric and 1G Ethernet base connections
    • SB-RTM401
      The SANBlaze SB-RTM401 is a rear transition module (RTM) that features a SAS expander which provides a storage I/O path between the front AdvancedTCA board and rear I/O access panel (+)

      Features:

      45176.jpg
      • The front AdvancedTCA board connection conforms to the 3-row Advanced RTM standard
      • Optionally, the module may be populated with up to four (4) SAS, SATA or SSD 2.5" disk drives
      • On the rear panel, the SB-RTM401 provides a 4-lane connector that allows direct connection to an external host blade
    • SB-RTM402
      The SANBlaze SB-RTM402 is a rear transition module (RTM) that features a SAS expander that provides a storage I/O path between the front AdvancedTCA board and rear I/O access panel (+)

      Features:

      45177.jpg
      • The front AdvancedTCA board connection conforms to the 3-row Advanced RTM standard
      • Optionally, the module may be populated with up to two (2) SAS, SATA or SSD 2.5" disk drives
      • On the rear panel, the SB-RTM402 provides two 4-lane SAS connectors that allow direct connection to an external host blade
    • SANBlaze SB-AMC56
      First Advanced Mezzanine Card module to implement Sun Microsystem's 10GbE multithreaded networking technology (+)

      Features:

      41430.jpg
      • This Advanced Mezzanine Card (AMC) features four optical Ethernet ports, two 10Gb SFP+ and two 1Gb SFP
      • Features Sun Microsystems's network controller with chip multithreading (CMT) technology for optimized network performance, whether paired with Intel, AMD® or Sun Microsystems' Netra server blades
      • Multithreading helps accelerate application performance by optimizing I/O throughput within environments that utilize parallel threads
    • SB-AMC-SAS
      Advanced Mezzanine SAS Adapter (+)

      Features:

      32124.jpg
      • 8 SAS/SATA ports
      • 3 Gbps per port
      • Integrated RAID 0, 1, 1E, and 10E
    • RCP-Tactical Ops
      A rugged AdvancedTCA solution for C4ISR applications such as shipboard, ground, and airborne battle management and communications systems (+)

      Features:

      • Can be used for frontline field or fixed-mount deployments
      • Supports SIPRNet and NIPRNet
      • Modular with building blocks comprised of storage, networked computing elements, and switch and payload blades that comply with the AdvancedTCA standard
  • Agilent Technologies  (1)
    • Agilent E2944A ATCA + AMC probing solutions
      Passive AdvancedTCA probe board of the System protocol Tester for ASI and PCI Express protocol analysis (+)

      Features:

      • Passive probe board with AMC support
      • Active AdvancedTCA probe board for the ASI and PCI Express protocl simulus Exerciser solution
      • Support for PCI Express protocol analysis via AdvancedTCA/AMC form factor
  • Kontron  (6)
    • OM9141-10G
      10G ATCA open modular platform OM9141-10G, featuring new advanced and faster bladed data transport, and switching and system management hardware. Kontron's 10 Gigabit Ethernet (GE) ATCA open modular platform is a starting point for telecom equipment manufacturers (TEMs) to build on a common platform a multitude of new equipment configurations using CPU, NPU, DSP, storage and specialized 3rd-party ATCA-based line cards that meet the requirements for 3G, 4G LTE, WiMAX, GPON, IPTV and carrier cloud network elements. (+)

      Features:

      193940339184183131.jpg
      • Redundant power entry module
      • Cooling infrastructure with hot swappable redundant fans
      • Second generation 10GbE switching capabilities based on the Kontron 10G ATCA switch AT8910
    • AM4101
      An AdvancedMC processor module (+)

      Features:

      • Based on the 1.5 GHz dual core Freescale PowerPC MPC8641D, the Kontron AM4101 delivers up to 2.3 MIPS/MHz computing performance and the highest Ethernet bandwidth without breaking the power budgets of modular AdvancedTCA carriers or highly integrated, redundant MicroTCA multiprocessing systems
      • Integrated Altivec 128-Bit Vector Processing unit
      • Suitable for telecom, medical, industrial imaging, and military/aerospace applications
    • AM4100
      1.5 GHz Dual Core Freescale PowerPC MPC8641D (+)

      Features:

      33527.jpg
      • Up to 2.3 MIPS/MHz computing performance and highest Ethernet bandwidth suitable for modular AdvancedTCA carriers or highly integrated, redundant MicroTCA multiprocessing systems
      • Integrated Altivec 128-bit Vector Processing Unit, which also replaces DSPs
      • Fits telecommunication equipment manufacturers and enterprise datacoms' needs
    • AM4301
      Quad GbE module AdvancedMC unit for network applications that require multiple ports directly from an AdvancedTCA processor blade (+)

      Features:

      33103.jpg
      • Based on the Intel 82571EB Gigabit Controller, the AM4301 features 4 x 10BASE-T/100BASE-TX/1000BASE-T ports and supports PCI Express x8, x4, and x1 link and remote management via IPMI v1.5
      • As a hot swappable, Field Replaceable Unit (FRU), the AM4301 also follows the same stringent carrier grade RASM feature set
      • When offered in combination with AdvancedTCA platforms, it enables telecom equipment manufacturers to conserve valuable system slots, as the AM4301 maximizes communications I/O for Gigabit Ethernet and Fast Ethernet networks with four independent 10/100/1000 ports from a single slot [...]
    • XL1x00 Series
      Flexible, cost effective platforms (+)

      Features:

      • Backplane options include H.110 on J4 and PICMG 2.16 configurations
      • Designed for telecom, telephony, network infrastructure, or military equipment manufacturers, XL1100 (1U), XL1200 (2U), XL1300 (3U), and XL1400 (4U) have already been delivered with Kontron 6U Intel and PowerPC processors, PMC, and I/O boards [...]
    • AM4020 - Highest performance single AMC
      The AM4020 is a powerful single-width processor module, which is designed around the new Intel Mobile Core i7 processor (+)

      Features:

      46584.jpg
      • With up to dual 2.53 GHz, the AMC module offers the ultimate in computing power and integrated graphics when utilized in MicroTCA and AdvancedTCA integrated platforms
      • The single-width module integrates the memory controller, PCI Express and the graphics processor within the multicore processor [...]
  • Avnet Electronics Marketing  (7)
    • ATCA-N1 (Dual Intel Xeon E5 ATCA)
      The ATCA-N1 blade is a high performance computing platform that is designed to provide maximum computing, memory and storage flexibility in a single ATCA chassis slot (+)

      Features:

      • Intel-based AdvancedTCA blade server utilizing Intel’s 32 nm processor technology
      • Dual purpose memory sockets enable the use of up to 4 x SATADIMM solid state drives
      • mSATA solid state drive provides flexible expansion storage/boot option
    • AdvancedTCA Product Line
      Fully telco-grade PICMG 3.x compliant (+)

      Features:

      30254.jpg
      • Meets NEBS requirements including cooling, noise, and shielding
      • A platform for building carrier-grade telecom applications supporting five-nines (99.999 percent) availability
      • High-density/high-performance computing environment
    • ATCA-RT01 Advanced RTM w/ Video & Storage
      The ATCA-RT01 provides high reliability SAS storage, VGA video output and additional I/O functionality for AdvancedTCA systems using x86 processor blades from PDSi or Sun Microsystems, plus Sun's Netra CP3260 blade (+)

      Features:

      39363.jpg
      • For telecom, aerospace, and military systems requiring a mix of these compute blades, the ATCA-RT01 can provide a common RTM solution
      • NEBS Level 3 compliant
      • Windows and Linux compatible
    • ATCA-F1 Dual AMD Opteron® Blade PDSi
      The ATCA-F1 blade features two dual-core or quad-core AMD Opteron CPUs for high performance and low power consumption (+)

      Features:

      39364.jpg
      • Up to 32 GB 667 MHz memory
      • An AdvancedMC site and RTM interface provide I/O expansion capability (using PDSi ATCA-RT01)
      • This is a robust general-purpose server platform for telecom, aerospace, military, and enterprise AdvancedTCA systems
    • ATCA-F1 Blade
      Dual AMD Opteron AdvancedTCA blade with RTM Interface is a robust, high-performance general purpose AdvancedTCA compute platform for telecom, miltary, and aerospace applications (+)

      Features:

      39450.jpg
      • Two dual-core or quad-core AMD Opteron CPUs for high-performance and low power consumption
      • Up to 32 GB 667 MHz memory in four DIMM sockets
      • Zone 3 RTM interface provide I/O expansion capability using PDSi ATCA-RT01
    • XMC-E24D/PMC-E24D Dual-Display Graphics Module
      PDSi offers these high-performance dual-display graphics modules in both XMC and PMC form factors (+)

      Features:

      45803.jpg
      • Using the ATI Radeon E2400 graphics controller from AMD, these modules enable VME, cPCI, and AdvancedTCA systems to take full advantage of AMD's embedded advanced graphics technology
      • They provide simultaneous independent support of either one digital DVI and one VGA analog display or two VGA displays at 32-bit color and up to 2048 x 1536 resolution
      • This module provides the high performance, low power, flexibility, and long life-cycle availability required by many real-world embedded applications in industries such as military/aerospace, industrial control and instrumentation, telecom/datacom, and medical imaging
    • ComputeNode
      Full family of 1U through 4U chassis, CompactPCI, and cPSB (PICMG 2.16) (+)

      Features:

      15569.jpg
      • Proven NEBS Level 3 compliant designs for high speed, high availability telecom and networking applications
      • Built-in Alert!Node alarm card for out-of-band chassis management
      • Redundant, hot-swappable AC or DC Power Supplies with Filters and Dual Feed option
  • N.A.T. GmbH  (2)
    • NAMC-8560-xE1/T1/J1
      The NAMC-8560-xE1/T1/J1 is targeted at telecom applications with extensive need for a high aggregation of multiple E1/T1/J1 interfaces combined with access to switched networks based on high-bandwidth Ethernet (+)

      Features:

      29899.jpg
      • PCIe interface and compliance: Four lanes PICMG AMC.1 R1.0
      • IPMI and compliance: PICMG AMC.0 R1.0, PICMG 2.9 R1.0
      • I-TDM and compliance: GbE at common options region, PICMG SFP.1 R1.0
    • NAMC-8E1/T1/J1
      Telecommunication interface board NAMC-8E1/T1/J1 in Advanced Mezzanine Card (AdvancedMC) compact, mid- and full-size form factor for price-sensitive MicroTCA and AdvancedTCA systems (+)

      Features:

      43641.jpg
      • For telecom applications with extensive need for a high aggregation of multiple E1/T1/J1 interfaces combined with access to switched networks based on high-bandwidth Ethernet
      • Provides 8 or 16 primary rate interfaces at the front panel
      • Optimized to occupy minimum space (compact size) or maximum amount of channels (up to 16) for full size
  • PT  (8)
    • AMP5095 7U PICMG 2.16 Platform
      Part of the company's Advanced Managed Platform offering (+)

      Features:

      19609.jpg
      • 7U, 19-in, CompactPCI PICMG 2.16 platform
      • Ten hot-swappable, 6U, standards-based slots
      • Eight payload slots
    • CPC358 8-Port WAN Communications Adapter
      The CPC358 is an eight port serial communications processor designed to operate in CompactPCI® systems as a peripheral or in a PICMG® 2.16 chassis as a stand-alone communications system (+)

      Features:

      14828.jpg
      • It provides OEMs, integrators and end users with a high performance platform for use in server farms or datacom/telecom applications
      • Featuring the Motorola MPC8255 PowerQUICC II™ processor, the CPC358 can independently process protocols such as X.25, Frame Relay, LAPD and Radar Receiver in an Internet/WAN environment
      • In Telecom applications, the CPC358 will also support MTP-2 on all eight links
    • CPC300 Advanced PTMC Carrier Blade
      An advanced PTMC carrier blade that allows systems integrators to create a custom blade by populating it with PTMC modules that meet specific application requirements (+)

      Features:

      21981.jpg
      • Providing two PTMC sites that comply with the PICMG 2.15 standard, the CPC300 can be used with a wide array of PTMC modules available today, ranging from telecom I/O cards, DSP cards, or packet processing modules.
      • PICMG 2.16 or standard PCI bus operation
      • 667 MHz PowerPC with L1/L2 cache
    • AMC131
      32-bit AdvancedMC compute module designed for high-performance embedded applications (+)

      Features:

      35410.jpg
      • Freescale Dual-Core 1 GHz MPC8641D PowerPC Processor
      • Mid-size, single compute module
      • High-performance computing solution for AdvancedTCA and MicroTCA systems
    • Monterey 8000
      MONTEREY 8000, based on the MicroTCA.4 specification, bridges the gap between AdvancedTCA and MicroTCA (+)

      Features:

      • With Rear Transition Modules for AMC and MCH payload, it delivers high-availability, service-ability, high-performance, high-speed bandwidth, and backwards compatibility to existing AMCs in the ecosystem
      • As an Application-Ready Platform integrated with quad-core processing and carrier-grade Linux OS, it's highly tuned for next-generation networking applications such as 4G mobile and telecom aggregation layer applications, IMS-based services, and military sensor acquisition and communications systems. [...]
    • AMC111
      High-performance computing solution for AdvancedTCA and MicroTCA systems (+)

      Features:

      35409.jpg
      • Single board compute module designed for high-performance embedded applications
      • 64-bit single-core AMD Turion 2.0 GHz processor
      • Mid-size, single compute module
    • CPC308 TDM/IP Edge Processor
      A network-optimized access controller suited for both PSTN and IP telephony applications (+)

      Features:

      20816.jpg
      • For applications including wireless infrastructure equipment, media and signaling gateways, IP media equipment, telecom switching/routing equipment, and SS7 network elements
      • Enables adding DSP/CPU processing via PTMC sites
      • PICMG 2.16 or standard PCI bus operation
    • CPC324 Edge Processor
      PICMG 2.16 or standard PCI Bus operation (+)

      Features:

      21231.jpg
      • 24 fully channelized T1/E1/J1 spans (768 software programmable channels)
      • Onboard Octal Giga-bit Ethernet switch
      • 800 MHz PowerPC with L1/L2 cache
  • Radisys Corporation  (12)
    • Promentum ATCA-3000
      Single slot AdvancedTCA PICMG 3.0/3.1 compliant Fibre Channel disk storage module (+)

      Features:

      19738.jpg
      • Fully managed Fibre Channel storage module supporting module level hot swap
      • Single 3.5" disk drive site carrying 300 GB high performance, high reliability SCSI drive
      • Supports 1 Gbps or 2 Gbps Fibre Channel addressable through IPMI
    • ATCA 10GbE System
      AdvancedTCA 10 GbE traffic management and security system delivers very high performance deep packet inspection capabilities to allow TEMs to rapidly develop and deploy content-aware platforms (+)

      Features:

      33077.jpg
      • -Deep Packet Inspection for Content-Aware Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Deep Packet Inspection: Multi-core, multi-threaded MIPS64 processor -Integrated 10 Gbps security acceleration engine
    • ATCA-PP50 Packet Processing Blade
      AdvancedTCA blade supporting two multi-core RMI XLR732 packet processors (+)

      Features:

      33080.jpg
      • Delivers deep packet inspection and security capabilities for wireless aggregators, IPTV, IMS, and security
      • Two XLR732 processors, each with 8 multi-threaded MIPS cores
      • Up to 16 GB per blade, 8 GB per XLR
    • FlexTCA
      AdvancedTCA deep packet inspection (DPI) solution (+)

      Features:

      47693.jpg
      • Network intelligence solutions such as Policy Charging and Enforcement Functions (PCEF) can exceed 200 Gbps while wireless core and security applications can scale up to 320 Gbps
      • Delivers up to 4 times the processing density of previous generation AdvancedTCA offerings at a price per bit savings of up to 75 percent
      • Enables network equipment providers (NEPs) to quickly and cost-effectively produce the scalable DPI applications operators need to monitor and control their network traffic while ensuring quality of service and experience (QoS/QoE)
    • Promentum SYS-6016
      10 Gigabit (16 slot) AdvancedTCA Application Ready Platform (+)

      Features:

      44283.jpg
      • Application ready platform to address next generation requirements for RNC/BSC, Media Gateways, IMS and IPTV infrastructure
      • Meet capacity and throughput requirements easily with advanced technologies such as 10 Gigabit Ethernet, Dual-core processing, media processing, and NPU-based wire-speed 10 Gbps line cards
      • 16-slot capacity provides the maximum number of billable application slots in an ATCA carrier-grade platform
    • FlowEngine
      A deep packet inspection (DPI) software framework to enable network equipment providers (NEPs) to accelerate development and delivery of applications that make use of DPI (+)

      Features:

      • Designed to save time and boost performance, FlowEngine combines best-in-class software components with Continuous Computing load balancing and Trillium monitoring software with an extensive range of application intelligence software from Qosmos and packet processing software from 6WIND and Wind River
      • Provides a foundation allowing users new to network intelligence to rapidly create advanced applications that run on the company's carrier-class, standards-based FlexTCA hardware platforms
      • Originally built on Continuous Computing's field-proven 10G FlexPacketATCA-PP50 DPI blade, FlowEngine is now coming to the 40GbE FlexTCA platforms delivering a range of solutions from 40-320Gbps capacity
    • SEG 11000
      A robust telecom security gateway based on NDS standards that provides stateful firewalling and IPsec tunneling in a single platform (+)

      Features:

      46963.jpg
      • The Radisys LTE SEG secures LTE Access/Backhaul and LTE Packet Core networks, as well as current generation wireless offload applications like I-WLAN, UMA/GAN and FemtoCell that are evolving to LTE
      • The Radisys LTE SEG, is built around the carrier-grade Advanced Telecommunications Computing Architecture (ATCA), and offers world-class security features with multi-gigabit performance
      • The LTE SEG is also available as a turnkey ATCA blade that can be integrated into other network elements
    • ATCA-XE50
      AdvancedTCA SBC (+)

      Features:

      35159.jpg
      • Two quad-core Xeon processors
      • For deploying a wide range of 10 GbE high-performance, scalable telecom applications
      • Dual Quad-Core Xeon processing power
    • FlexTCA Systems
      Fully integrated and regulatory compliance-tested (EMC, thermals, safety, etc.) (+)

      Features:

      36000.jpg
      • SAF-compliant HA middleware
      • Unified Management Interface to hardware and protocol software
      • Integrated HA telecom protocol stacks (such as Trillium SIP)
    • ATCA 40G Platforms
      Pre-integrated 40G ATCA Platforms. (+)

      Features:

      183838669505351182.jpg
      • Fixed & Mobile Broadband Networks
      • 3G & LTE Gateways including Internet Offload
      • DPI Policy Enforcement & Traffic Shaping
    • cPCI 1GbE System
      Provides high capacity computing solution with up to 38 Core 2 Duo dual core compute nodes, each of which is supported by its own local memory and I/O to maximize performance (+)

      Features:

      33079.jpg
      • -High-Performance Platform for IMS and NGN Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Up to 38 Core 2 Duo (Dual Core) low voltage compute nodes
    • T40 40G ATCA Platform
      The T40 is a 40G telecom-grade ATCA system built to NEBS specifications that is pre-integrated with the largest selection of ATCA blades and software providing a robust, high-performance solution that TEMs can deploy today. The T-Series is a virtualized platform with the ability to support a wide range of both SDN and NFV applications. The T-Series provides telecom-grade systems built on cutting edge processors and software that accelerate time to market for high performance network and application delivery platforms. FEATURES: 40-Gigabit integrated platform 640G hub providing 40G to each slot Integrated platform management software Load balancing and switch redundancy Ideal for SDN/NFV, LTE, and Network Security application. High-density input/output (I/O) and throughput Customizable to support specialized applications for any telecommunications environment [...] (+)

      Features:

      220553719961983279.jpg
  • asis  (1)
    • Asis 2 slot AdvancedTCA AC/DC shelf
      The Asis 2 slot ATCA chassis is the most advanced chassis available in the market with both AC and DC configuratiosn for maximum flexibility, 300W per slot, One powerful fan tray, containing four high performance fans and a 40 Gbps baclplane speed among its many other features. The Chassis is CE, UL, TUV certified and is Designed to meet FCC and CISPR requirements. (+)

      Features:

      205388128724493676.jpg
      • 40 Gbps backplane speed
      • Fabric interface with full mesh or 15X replicated mesh interconnect.
      • 300W per slot
  • Mirabilis Design  (1)
    • VisualSim Architect
      AdvancedTCA-specific simulation environment for the performance, architecture and power exploration to construct a validated and Executable Specification of the product (+)

      Features:

      • Graphical environment contains standard AdvancedTCA components of hardware and software
      • This includes switches, buses, processors, cache, memory, DMA, and RTOS
      • The modeling libraries are used to construct models of both the AdvancedTCA products and the networking environment around them
  • ESO Technologies  (2)
    • ATCA -Tester
      AdvancedTCA Tester (+)

      Features:

      • Automated software tool testing AdvancedTCA equipment compatibility with respect to PICMG 3.0 specification system [...]
    • HA Computing Platform Design & Integration
      Training, architecture consultancy, software development, and integration services (+)

      Features:

      20425.jpg
      • AdvancedTCA standard
      • System management (IPMI, HPI, SNMP)
      • HA capabilities
  • Alliance Systems  (2)
    • AdvancedTCA Servers
      Standards-based, open architecture meets reliability and scalability needs of next-generation networks (+)

      Features:

      • 14U, 441mm-deep (17.44"), rackmount enclosure
      • 14-slot, fully passive, AdvancedTCA-compliant backplane with dual-dual star routing topology
      • Support for up to 12 single or dual Intel Xeon AdvancedTCA CPU boards supporting up to 2.0 GHz on an Intel E7501 chipset and 4 Gbytes of PC2100 ECC Registered DDR RAM
    • A-14000 14U Powerful, High-Reliability ATCA Server
      14U rack-mount server (+)

      Features:

      20411.jpg
      • 14-slot, fully passive, PICMG 3.1 backplane with dual-dual star routing topology
      • Supports 12 node slots for single or dual Intel Xeon CPU or other AdvancedTCA boards
      • Supports up to two 16-port ZNYX PICMG 3.0 Gigabit Ethernet Base Fabric Switches with 10/100/1000 Mbps Ethernet
  • ERNI Electronics, Inc.  (1)
    • 163210 Evaluation Kit
      An evaluation kit for the Ermet ZD advanced differential pair connector system, specified by PICMG 3.0 as the high-speed data transport connector for AdvancedTCA architecture (+)

      Features:

      12193.jpg
      • Single-line kit
      • Measures the signal integrity behavior of the connector system
      • Can be used to determine differential impedance of single signal pairs, crosstalk between two signal pairs, transmission and reflection behavior of single pairs, and propagation delay of single pairs
  • Rittal Corporation  (4)
    • 9808623 ATCA Development chassis
      An AdvancedTCA development platform (+)

      Features:

      • Intended for developers of telecom systems designed to comply with the PICMG 3.0 specification
      • Provides a 19” rackmount shelf option with a Kaparel/Jardon 11401 full-mesh, 14-slot backplane
      • The 14U x 84HP chassis accommodates 14 slots of 8U x 6HP x 280mm boards and 14 slots of 8U x 6HP x 70mm rear-transition modules
    • MicroTCA system
      A MicroTCA system that accommodates AdvancedMC cards (+)

      Features:

      30434.jpg
      • 2U, 3U, and 5U (high) configurations
      • Can be filled with multiple slots
      • Built-in fan aids shelf cooling to keep AMCs cool in 3U and 5U versions
    • Ripac TC Series
      Telecom subracks and MPS systems include hot-swap power supplies, hot-swap RiCool fan modules, and low-profile telecom handles (+)

      Features:

      • Compliant with PICMG 2.16 cPSB
      • Designed for central office switching, voice call processing, satellite communication, cellular, wireless, and data communications applications
      • Front-accessible designs
    • CompactPCI Power Supply
      350W power supply designed for use in 6U CompactPCI computers, test, and telecom systems (+)

      Features:

      • Meets PICMG CompactPCI specs plus N+1 redundant and hot-swap applications, high density cooling fins positioned directly in airstream
      • LED status indicators and push-button inhibit switch on front panel
      • Two input and two output voltage options
  • Sun Microsystems, Inc.  (2)
    • CP3250
      AdvancedTCA blade server (+)

      Features:

      37853.jpg
      • Next generation AdvancedTCA blade infrastructure with the Sun Netra CP3250 AdvancedTCA Blade Server based on the quad-core Intel Xeon processor
      • Runs on the Sun Netra CT900 AdvancedTCA Server which, with the 10 GbE networking and AdvancedRTM technology, delivers top performance, operating system choice, and choice of the new Sun Intel Xeon AdvancedTCA Blade as well as blades based on the AMD Opteron processor and the UltraSPARC T1 and T2 processors [...]
    • Netra AdvancedTCA System
      High-capacity (up to 2.5 terabits/sec), packet-based backplane with low latency (+)

      Features:

      20428.jpg
      • Highly scalable, switched fabric architecture overcomes I/O bottlenecks
      • Increased performance density with support for up to 200 watts per board and as many as 16 boards per shelf
      • At least two power supplies and two power rails to each slot reducing single points of failure
  • Accolade Technology  (1)
    • ASTDM
      Flexible, scalable Verilog RTL design block that implements the PICMG SFP.1 I-TDM specifications (+)

      Features:

      • ASTDM may be used in an ASIC or FPGA for transforming TDM traffic (DS0 data) into I-TDM packets, to be carried over telecom backplanes such as AdvancedTCA and MicroTCA
      • Flexible and scalable microsequencer-parser architecture
      • Easy integration of new features and scalability from 8 T1/E1 (256 channels) to OC-12 (8K channels)
  • Pixus Technologies  (1)
    • 6U ATCA SlotSaver - 40G
      Pixus Technologies, a supplier of backplane, enclosure, and embedded component solutions, has introduced a new 6U AdvancedTCA (ATCA) SlotSaver Shelf that gains 2 slots of payload card usage, along with AC power. The density, full redundancy, and versatile power configuration is well suited for telecom, military/aerospace, and high-end networking/computing applications. (+)

      Features:

      200691083411648479.jpg
      • Combined switch/shelf manager saves 2 node slots
      • 50% more computing density
      • Simultaneous AC/DC power
  • Scan Engineering Telecom  (9)
    • SAMC-204
      High-performance computing module for use in AdvancedTCA and MicroTCA systems (+)

      Features:

      44216.jpg
      • Designed around Intel's x86-based Core 2 Quad processors, it provides exceptional computing power and performance in the convenient and versatile AdvancedMC form factor
      • The SAMC-504 complies with the most current PICMG specifications for operation in AdvancedTCA and MicroTCA applications
      • This module supports sub-specifications to insure compatibility with the broad set of interface options including SAS/SATA, Ethernet and PCI Express
    • SAMC-502
      Intel Core 2 Duo based processor AdvancedMC module for high-performance computing (+)

      Features:

      43314.jpg
      • PICMG AMC.0 R2.0 full-size AdvancedMC module
      • Intel Core 2 Duo dual core processor 2.16 GHz
      • Intel 3100 server class chipset with 667 MHz FSB
    • SAMC-506
      Intel Core 2 Duo based AdvancedMC processor module for high-performance computing (+)

      Features:

      43315.jpg
      • PICMG AMC.0 R2.0 mid-size AdvancedMC module
      • High-performance Intel Core 2 Duo dual core processor 1.5 GHz
      • Intel 3100 server class chipset with 667 MHz FSB
    • SAMC-301
      The SAMC-301 is a high-performance Graphic card implemented as a single mid-size or full-sze AdvancedMC (AMC) card (+)

      Features:

      45157.jpg
      • The design is based on the Chrome430 processor
      • 128 GB GDDR3 running at 1800 MHz and 725/1025 MHz (Geometric Domain/Shader Domain) GPU frequency ensuring maximum data processing performance
      • Optimized for high-performance processing systems the SAMC-301 is targeted but not limited to the telecom applications: media streaming, routing and fits into industrial applications which are required intensive processing
    • SAMC-504
      Processor AdvancedMC module based on Intel Core2 Quad processors for high-performance computing (+)

      Features:

      43312.jpg
      • PICMG AMC.0 R2.0 full-size AdvancedMC processor module
      • High-performance Intel Core 2 Quad quad core processor
      • Intel 3100 server class chipset with 800 MHz FSB
    • SAMC-505
      Intel Core 2 Duo based AdvancedMC processor module for high-performance computing (+)

      Features:

      43316.jpg
      • PICMG AMC.0 R2.0 full-size/double-width AdvancedMC module
      • High-performance Intel Core 2 Duo dual core processor 1.5 GHz
      • Intel 3100 server class chipset with 667 MHz FSB
    • SAMC-503
      The SAMC-503 is a highy integrated processor board implemented as Single Mid-Size ADvancedMC (AMC) card (+)

      Features:

      45158.jpg
      • SAMC-503 design is based on the Intel Core2 Quad processors combined with the Intel 3100 server-class chipset
      • The board includes up to 2 GB DDR2-400 memory with ECC
      • The SAMC-503 provides up to 64 GB Flash memory via a SATA channel
    • SAMC-508
      The SAMC-508 is a higly integrated Processor board implemented as single mid-size AdvancedMC (AMC) card (+)

      Features:

      45155.jpg
      • SAMC-508 design is based on the Intel Core 2 Duo processors combined with the Intel 3100 server-class chipset
      • The board includes up to 4 GB DDR2-400 memory with ECC
      • The SAMC-508 provides up to 128 GB Flash memory via a SATA channel
    • SAMC-507
      The SAMC-507 is a highly integrated Processor board implemented as a single full-size AdvancedMC (AMC) card (+)

      Features:

      45159.jpg
      • The design is based on the Intel Core2 Duo processors combined with the Intel 3100 server-class chipset
      • 800 MHz FSB to Intel 3100 chipset ensuring maximum data throughput
      • The SAMC-507 provides up to 128 GB Flash memory via SATA channel
  • GE Intelligent Platforms, Inc.  (8)
    • DS3/E3
      AMC.1 and PCIe Rev. 1.0 compliant (+)

      Features:

      • Full duplex DS3/E3 interface
      • AdvancedTCA AMC Hot Swap compliant
      • Intelligent Platform Management Interface (IPMI)
    • TELUM 1001-DE DS3/E3 Wan Adapter AdvancedMC
      Full duplex DS3/E3 interface (+)

      Features:

      22476.jpg
      • AMC.1 & PCIe Rev 1.0 compliant
      • AdvancedTCA AdvancedMC hot swap compliant
      • Intelligent Platform Management Interface (IPMI)
    • TELUM 1001-O3M
      An Advanced Mezzanine Card (AdvancedMC) for Asynchronous Transfer Mode (ATM) communications (+)

      Features:

      • Provides full-duplex OC-3 ATM front I/O capabilities to an AdvancedTCA system
      • Intel 41210 serial-to-parallel PCI bridge to the PCI Express bus to communicate with the host processor on an AdvancedTCA system
      • Complies with ATM Forum UNI 3.1 and TM 4.0 and is based on an advanced ATM segmentation and reassembly (SAR) controller designed to optimize the PCI Express bus interface
    • Telum 1001-DE
      AMC.1 & PCI-e Rev 1.0 compliant (+)

      Features:

      22359.jpg
      • Full duplex DS3/E3 Interface
      • ATCA AMC Hot Swap compliant
      • Intelligent Platform Management Interface (IPMI)
    • AT920
      A 24-port layer 2/3 AdvancedTCA switch (+)

      Features:

      16101.jpg
      • Carrier-grade switch
      • 16 ports compliant to PICMG 3.0
      • Up to eight Gigabit Ethernet I/O ports
    • Telum ASLP11
      High performance processor AdvancedMC module (+)

      Features:

      38385.jpg
      • Up to 4 GB of ECC memory
      • Intel Core 2 Duo L7400 1.5 GHz CPU
      • Single width, full- or mid-sized AdvancedMC processor board
    • TELUM 1001-012S/2
      High performance, single wide, full height, AMC.1 compliant ATM adapter (+)

      Features:

      18649.jpg
      • 1 port front I/O full duplex OC-12 interface
      • Designed for high availability telecom applications
      • Uses the PCI Express (PCIe) Bus to communicate with the host processor on an AdvancedTCA system as well as other architectures
    • TELUM 1000 Line
      155 Mbps full duplex line-speed (+)

      Features:

      19053.jpg
      • PCI Express; PCI-e Rev. 1.0-compliant
      • Support for 16,000 VCCs; 4 MB local memory
      • Traffic management supported: ABR, CBR, UBR, and VBR
  • Mercury Systems  (5)
    • Ensemble MPC-102
      The Ensemble MPC-102 Dual-Core 8641D AMC Module combines dual-core processing power and flexible I/O for AdvancedTCA and MicroTCA (µTCA) platforms (+)

      Features:

      34139.jpg
      • Dual-core Freescale MPC8641D processor running at up to 1.33 GHz, combined with memory and I/O options for maximum application flexibility
      • Single-width AdvancedMC, either mid-height or full-height, differing only by faceplate
      • Includes an IPMI controller, firmware, and IPMI links for chassis management-based control and configuration
    • Momentum AXA-110
      An Intel Core 2 Duo based Advanced Mezzanine Card (AdvancedMC) (+)

      Features:

      33151.jpg
      • Provides modularity for demanding telecom and military communications
      • Suited for processing and communications heart of AdvancedTCA or MicroTCA systems
      • Maximum I/O with up to 16 AdvancedMC Fat Pipes connected
    • Ensemble 8000
      Next-generation secure AdvancedTCA (ATCA) (+)

      Features:

      306584916861905388.jpg
      • ATCA commercial technology combined with dense OpenVPX processing and systems integrity technolgies
      • Next step in evolving Modular Open System Architectures (MOSAs) to meet massice secure processing requirements in the growing tactical cloud processing marketplace
      • ATCA Ensemble building blocks leverage OpenVPX processing densities and Mercury Systems' advanced, fourth generation server-class thermal management technologies [...]
    • Momentum Series AXA-110 AMC
      Momentum Series AXA-110 Advanced Mezzanine Card (AMC), which uses a dual-core Intel processor combined with an FPGA (field-programmable gate array) for flexible switch fabric connectivity (+)

      Features:

      32646.jpg
      • AMCs provide the modularity for demanding telecom and military communications, and the AXA-110 is ideally suited for the processing and communications heart of AdvancedTCA or MicroTCA systems
      • The Momentum Series AXA-110 is Mercury's second generation of AMC cards that combine a dual-core Intel processor with the latest Xilinx FPGA. The AXA-110 is the first AMC to incorporate an Intel Core 2 Duo processor, which yields more than 25 percent overall performance improvement than an Intel Core Duo processor, and more than double the overall performance of Intel Pentium M processor, as measured by SPECint_rate_base2000
      • The key to accessing the substantial processing power is the connectivity provided by the serial fabric interfaces on the AMC. Using a Xilinx Virtex-5 FPGA, the AXA-110 connects to up to 16 high-speed serial lines totaling 40 Gigabits per second
    • Ensemble 3000 Series 3U VPX System
      A 3U VPX system suitable for use in applications with SWaP limitations (+)

      Features:

      42430.jpg
      • Supplies advanced levels of computing to small sensor platforms operating in difficult conditions
      • Comprised of three module types: system controller hub (SCH), data plane switch (DPS), and payload modules, which can include processing modules, I/O, carriers, or combinations of both
      • Three types of independent planes: a GbE control plane, IPMI-based management plane, and high-bandwidth data planes for direct support of multistage processing
12/6/21 14:20
Close

Subscribe to AdvancedTCA updates