AdvancedTCA

Showing results for: advancedtca 40 gbps
Refine AdvancedTCA companies and products:
advancedtca 40 gbps advancedtca carrier blade advancedtca anniversary advancedtca specification picmg advancedtca 2011 advancedtca 40g xtca advancedtca architecture advancedtca 10 gbe advancedtca servers advancedtca blades long term evolution advancedtca all-ip advancedtca slots ipmi advancedtca advancedtca extensions advancedtca chassis advanced telecom computing architecture picmg advancedtca joe pavlat atca
Click on any vendor
to see a listing of
advancedtca 40 gbps related products.
  • Adax, Inc.  (2)
    • Adax PacketRunner
      The Adax PacketRunner is a state-of-the-art I/O, purpose-built, AdvancedTCA AMC carrier blade for NGN, IMS, and LTE telecom applications (+)

      Features:

      43746.jpg
      • With IP-transport, MPLS/Carrier Ethernet (CE), QoS, Security, Bandwidth Management, Packet Processing, I-TDM and Signaling capabilities, this blade meets the three greatest challenges for I/O in today's AdvancedTCA systems: Scalability – coordinate multiple blades; Cost-Effectiveness – lowers cost per function; High Availability – N+1 up to N+R
      • By meeting these challenges the Adax solution reduces costs and dramatically improves the value for money of each AdvancedTCA slot
      • 4 x AMC bays
    • AdaxPacketRunner
      A state-of-the-art I/O, purpose-built, AdvancedTCA AMC carrier blade for NGN, IMS, and LTE telecom applications. With IP-transport, MPLS/Carrier Ethernet (CE), QoS, Security, Bandwidth Management, Packet Processing, I-TDM and Signaling capabilities, this blade meets the three greatest challenges for I/O in today's AdvancedTCA systems: Scalability – coordinate multiple blades (+)

      Features:

      44206.jpg
      • Cost-Effectiveness – lowers cost per function
      • High Availability – N+1 up to N+R
      • By meeting these challenges the Adax solution reduces costs and dramatically improves the value for money of each AdvancedTCA slot
  • ADLINK Technology, Inc.  (12)
    • aTCA-N700 40G Ethernet AdvancedTCA® Packet Processing Blade
      The aTCA-N700 is a single slot AdvancedTCA® (ATCA) blade powered by dual OCTEON II multi-core processors for high performance packet processing applications such as IPTV, LTE wireless, security and many more areas. The blade provides up to 40Gbps full duplex packet processing performance with flexible network interfaces. The aTCA-N700 is designed to provide high performance security enabled intelligent deep packet inspection and processing functions that are required by high-end network appliances, security appliances, switches, and servers. The major building block is the Cavium CN6880 packet processor subsystem. FEATURES: Two Cavium OCTEON II CN6880 processors, each with 32 cnMIPS64 V2 cores processors Eight memory sockets support VLP DDR3-1600 REG/ECC up to 128 GB Onboard Ethernet switch BCM 56842 provides connectivity to RTM, OCTEON II processor and backplane (Fabric) with L2 and L3 switch management software Dual 1000BASE-T Fabric Interface channels Powerful Local Management Processor - Freescale QorIQ P2041, quad-core @ 1.2GHz Flexible RTM support on 12 x10G SFP+ ports (RTM-RN710) or 2x 40G QSFP+ and 4x 10G SFP+ (RTM2-RN720) Supports ADLINK Software for Networks (ADSN) [...] (+)

      Features:

    • aTCA-6150
      The aTCA-6150 is a highly integrated AdvancedTCA processor blade supporting the latest 32nm process six-core Intel Xeon Processor 5600 Series with six sockets for DDR3-1066 VLP RDIMM up to 48 GB (+)

      Features:

      45151.jpg
      • I/O features include two 10 Gigabit Ethernet ports (XAUI, 1000BASE-KX4) compliant with PICMG 3.1 option 1/9, four Gigabit Ethernet 10/100/1000BASE-T ports to the face plate and AdvancedTCA Base Interface channels [...]
    • aTCA-6892
      Dual 4 Gbps Fibre Channel (FC) links powered by the Qlogic EP2432 PCI Express FC controller, offers remote setup, and can be configured with the FC links at the front panel via SFP optical transceivers, or to the backplane with Zone 2 connectors, supporting PICMG 3.1 option 4/7 connectivity (+)

      Features:

      35021.jpg
      • When combined with FC switch and storage blades, the aTCA-6892 can directly access integrated, high-performance Storage Area Network (SAN) in the same chassis without the need for additional fiber optic cabling
      • Dual 64-bit Intel LV Xeon Dual Fibre Channel AdvancedTCA processor blade
      • Dual 4 Gbps Fibre Channel Links
    • aTCA-3100 Series
      24/48-port AdvancedTCA Base/Fabric Switch Blade with 10 GbE uplink (+)

      Features:

      35022.jpg
      • 24 ports Gigabit Ethernet base interface switch
      • 24 ports Gigabit Ethernet fabric interface switch
      • 10 Gigabit Ethernet XFP Uplink port
    • aTCA-3110
      An AdvancedTCA hub switch board (+)

      Features:

      30787.jpg
      • Supports PICMG 3.1 Base Interface for AdvancedTCA shelves up to 14 slots (2 hub slots and 12 node slots)
      • Base interface provides 1000BASE-T Ethernet connections between the hub slot and each node slot
      • Eight tri-speed 1000/100/10BASE-T external uplink connections are provided on the front panel for easy access to the base interface
    • aTCA-6891
      PICMG 3.4 AdvancedTCA Advanced Switching Option3 (+)

      Features:

      • Quad ASI x4 Fabric Interface Channels up to 5-slot Full Mesh configuration, 32 Gbps
      • Dual 64-bit Low Voltage Intel Xeon 2.8 GHz
      • 1 MB L2 cache
    • aTCA-8505
      AdvancedTCA chassis with shelf manager and dual hot-swappable I2C controlled fan trays (+)

      Features:

      33316.jpg
      • Push-pull design for a right-to-left transverse of air flow and a more efficient cooling system
      • In order to accelerate the transition speed within the blades, the chassis backplane supports a full-mesh transition module
      • Suitable for network security appliance providers who demand high performance and remote control functionality
    • aTCA-3400
      20-port 10 GbE AdvancedTCA fabric switch blade with AdvancedMC bays (+)

      Features:

      37846.jpg
      • 24-port Gigabit Ethernet base interface switch
      • Thirteen node ports, 1 inter-switch port
      • Six egress ports plus one 10 GbE SFP+ uplink port
    • ATCA-3120
      PICMG 3.0 AdvancedTCA core specification (+)

      Features:

      19663.jpg
      • 1000BASE-T Gigabit Ethernet
      • Layer 3 switching
      • Base interface support for 14 node slots
    • aTCA-6100
      Dual Quad-Core Intel Xeon L5518 AdvancedTCA processor blade with 10 GbE fabric interface (+)

      Features:

      43748.jpg
      • Two quad-core Intel Xeon L5518 processors
      • Six memory sockets support DDR3-1333 REG/ECC up to 48 GB maximum capacity
      • Intel 82599 10 GbE controller supports two 10GBASE-KX4 ports on Fabric Interface
    • aTCA-9700 40G Ethernet AdvancedTCA® Processor Blade
      The aTCA-9700 offers enhanced thermal and power management capabilities for exceptional energy efficiency, while still supporting the intensive computing requirements of carrier-grade media server, networking, and wireless infrastructure applications. The aTCA-9700 40 Gigabit Ethernet processor blade features dual Intel® Xeon® E5-2600 v2 processors, as well as a single Intel® C604 chipset and dual Intel® Communications Chipsets 8920. It offers eight channels of VLP DDR3-1866 and REG/ECC memory up to 128 GB and provides versatile connectivity through quad 40GBASE-KR4 Fabric Interface channels, dual Ethernet 10/100/1000BASE-T Base Interface channels, and dual front panel 10/1001000BASE-T egress ports. Support for Intel® Hyper-Threading Technology and Intel® QuickPath Interconnect provides increased performance from both single and multi-thread workloads while maintaining thermal and energy efficiency. FEATURES: Two Intel® Xeon® processor E5-2600 v2 family (10C/20T) Two Intel® Communications Chipsets 8920; Intel® C604 PCH Eight memory sockets support VLP DDR3-1866; REG/ECC up to 128 GB Quad 40GBASE-KR4 Fabric Interface channels Two USB 2.0 ports, VGA, USB1/2, LAN1/2, COM1/2 (mini-USB) On-board bootable storage of 16G SATA flash (up to 64G) Intel® Hyper-Threading Technology Intel® QuickPath Interconnect [...] (+)

      Features:

    • aTCA-9700 40G Ethernet AdvancedTCA® Processor Blade
      The aTCA-9700 offers enhanced thermal and power management capabilities for exceptional energy efficiency, while still supporting the intensive computing requirements of carrier-grade media server, networking, and wireless infrastructure applications. The aTCA-9700 40 Gigabit Ethernet processor blade features dual Intel® Xeon® E5-2600 v2 processors, as well as a single Intel® C604 chipset and dual Intel® Communications Chipsets 8920. It offers eight channels of VLP DDR3-1866 and REG/ECC memory up to 128 GB and provides versatile connectivity through quad 40GBASE-KR4 Fabric Interface channels, dual Ethernet 10/100/1000BASE-T Base Interface channels, and dual front panel 10/1001000BASE-T egress ports. Support for Intel® Hyper-Threading Technology and Intel® QuickPath Interconnect provides increased performance from both single and multi-thread workloads while maintaining thermal and energy efficiency. FEATURES: Two Intel® Xeon® processor E5-2600 v2 family (10C/20T) Two Intel® Communications Chipsets 8920; Intel® C604 PCH Eight memory sockets support VLP DDR3-1866; REG/ECC up to 128 GB Quad 40GBASE-KR4 Fabric Interface channels Two USB 2.0 ports, VGA, USB1/2, LAN1/2, COM1/2 (mini-USB) On-board bootable storage of 16G SATA flash (up to 64G) Intel® Hyper-Threading Technology Intel® QuickPath Interconnect [...] (+)

      Features:

  • Advantech Corporation  (6)
    • Netarium ATCA Reference Systems
      Advantech’s Netarium™ series of ATCA Reference Systems are specifically targeted to help network equipment providers reach superior levels of performance over traditional rackmount servers or appliances used to extend their product range at the high end. The series represents a new generation of systems that offers superior performance, scalability and flexibility with the latest 40G backplanes, switches and application blades. We optimize the systems to achieve the highest possible density at the rack level, with a maximum number of payload blades, network ports and switching capacity. Each system is tailored for customers to rapidly deploy in applications that require faster and deeper packet processing, such as PCEF, network security, real-time traffic monitoring, load balancing, subscriber analytics and content optimization, among others. The systems integrate the chassis, cooling, power distribution and shelf management into an off-the-shelf platform solution capable of superior 5 NINES availability and reliability. FEATURES: ››14 SLOT: ––19" wide, 13U high AdvancedTCA Shelf fully integrated ––Up to 12 MIC-5333 or MIC-5332 Dual Intel® Xeon® blades ––Dual-Star backplane with 40G Switches ››6 SLOT: ––19" wide, 6U high,AdvancedTCA Shelf fully integrated ––Up to 4 MIC-5332 or MIC-5333 Dual Intel® Xeon® blades ––Dual-Star backplane with 40G Switches ››2 SLOT: ––19" wide, 3U high, AdvancedTCA Shelf fully integrated ––2 MIC-5333 Dual Intel® Xeon® blades and RTM-5104 Further configurations are possible including Advantech's ATCA-7310 Dual Cavium Octeon CN6880 blade and DSPA-8901 DSP-based Media Processing Blade. [...] (+)

      Features:

    • MIC-5322 10 GbE dual Intel® Xeon® 5500 ATCA blade
      The MIC-5322 is a dual processor Intel Xeon 5500-based AdvancedTCA blade for systems able to cool over 200W per slot (+)

      Features:

      44164.jpg
      • It enables the highest performance available in an AdvancedTCA form factor with 8 cores and 16 threads of processing power, low DDR3 memory latency, fast PCI Express 2.0, and accelerated virtualization
      • The Intel 82599 10 GbE controller plays a key role in end-to-end network performance and throughput, including a 5 Gbps PCI Express 2.0 interface to improve the entire data path as well as multicore optimized queue support
      • For fast and secure database applications, the blade supports up to 48GB of triple channel DDR3 with ECC
    • MIC-5401 SAS/SATA Storage AMC
      The Advantech MIC-5401 is a single-width/mid-size Advanced Mezzanine Card (AMC) designed to support a 2.5" SAS or SATA hard disk drive to work as an enterprise storage module on an AdvancedTCA platform or in a MicroTCA shelf (+)

      Features:

      44169.jpg
      • The 2.5" hard disk drive is connected to the AMC port 2 (SAS and SATA) and port 3 (SAS only) according to the AMC.3 specifications
      • Dual port SAS drives may be used on the MIC-5401 to increase the interface bandwidth of failover support between dual hosts in fault tolerant environments
      • Single-width, mid-size AMC form factor
    • MIC-5304
      10 GbE AdvancedTCA Fabric Hub Blade (+)

      Features:

      • PowerQuiCC III device
      • Inegrates latest Broadcom 10GbE and GbE switch technology
      • PowerQuiCC III runs Broadcom's FASTPATH Enterprise Software suite [...]
    • MIC-5401
      Advanced Mezzanine Card SAS/SATA Storage AMC (+)

      Features:

      42362.jpg
      • Single-width mid-size AMC form factor AdvancedTCA and MicroTCA compatible
      • SAS or SATA 2.5" hard disk drive compatible with dual port SAS drive support
      • 3.0 Gbps interface speed support
    • MIC-5203 & 5212 Quad & 10 Gigabit Ethernet AMC
      The MIC-5203 is a quad-port GbE AMC, with RJ-45 or SFP options using the Intel® 82580 Quad Gigabit Ethernet controller (+)

      Features:

      • The AMC provides a PCIe x4 interface at 5 Gbps per lane on AMC Ports 4-7
      • The MIC-5212 is a dual-port 10 GbE AMC with SFP+ modules for multi- and single-mode fiber media and is based on the Intel® 82599ES 10 Gigabit Ethernet controller
      • It provides a PCIe x8 interface at 5 Gbps per lane
  • Agilent Technologies  (3)
    • Agilent E2944A ATCA + AMC probing solutions
      Passive AdvancedTCA probe board of the System protocol Tester for ASI and PCI Express protocol analysis (+)

      Features:

      • Passive probe board with AMC support
      • Active AdvancedTCA probe board for the ASI and PCI Express protocl simulus Exerciser solution
      • Support for PCI Express protocol analysis via AdvancedTCA/AMC form factor
    • E2944A
      Enables nonintrusive capturing of ASI transactions between two line cards in the AdvancedTCA-based backplane (+)

      Features:

      • Alternatively, the exerciser can be used to emulate one of the line cards of the test setup
      • Suitable for bring-up and debug, validation, and compliance testing of AdvancedTCA form factor-based ASI boards and backplanes [...]
    • E2943A
      Active probe board (+)

      Features:

      • Plugs into the AdvancedTCA backplane to emulate real ASI designs or topologies
      • Offers analyzer and exerciser support for the AMC standard
      • Suitable for bring-up and debug, validation, and compliance testing of AdvancedTCA form factor-based ASI boards and backplanes [...]
  • American Megatrends  (1)
    • AMI ATCA Solutions
      MegaRAC AdvancedTCA management firmware (+)

      Features:

      • Built on the MegaRAC-PM IPMI 2.0 stack, widely tested and utilized by first-tier and embedded OEMs
      • Extensible, portable, and easy to deploy
      • Supports Event Generation and Reception, FRU State Maintenance, Redundant IPMB-0 Bus, E-Keying, and IPMC Commands
  • AppliedMicro  (4)
    • PRS C192X Cell Switch Fabric Interface
      Fabric interface mezzanine for AdvancedTCA I/O blades such as AMCC's “nP3710 ATCA” blade and RadiSys' “Promentum ATCA-7010” blade (+)

      Features:

      • Features the AMCC's PRS C192X fabric interface, a queue manager device of AMCC's PRS switch fabric family, the shared-memory cell switches that provide best-in-class features for carrier-grade switching applications
      • In star topology implementations, operates in conjunction with an AdvancedTCA Cell Switch blade like AMCC's PRS40G-ATCA and supports from 2.5 Gbps (overspeed factor of 2) to 4 Gbps (Ethernet) of user bandwidth
      • In mesh topology implementations, up to 8 AdvancedTCA I/O blades equipped with the PRS C192X FIC mezzanine can interoperate without any centralized fabric switch: one or two blades can support up to 10 Gbps of user bandwidth, the other blades operating at 2.5 Gbps (overspeed factor =2)
    • PRS40G-ATCA Cell Switch
      AdvancedTCA switch blade featuring AMCC's PRS 80G Switch Fabric device, a carrier grade shared-memory cell switch that provides best-in-class features (+)

      Features:

      23896.jpg
      • Compliant with PICMG 3.0 AdvancedTCA standard and PICMG 3.6 Cell Switching (draft) specification, an AdvancedTCA fabric interface for carrier grade applications
      • Offers 40 Gbps of user bandwidth with an overspeed factor of 2 and provides full switch blade redundancy with load balancing and cell lossless maintenance switchover
      • Supports 12 payload slots, each supporting between 2.5Gbps (overspeed factor of 2) and 4 Gbps (Ethernet) of user bandwidth
    • AMCC PRS80G-ATCA
      Switch blade supports 8 x 10 Gbps full-duplex slots with QoS enforcement at media speed (+)

      Features:

      32163.jpg
      • Suitable for the convergence of voice, video, and data traffic, thanks to efficient QoS, bounded transit delay, and guaranteed precedence of time sensitive traffic over other traffic types
      • QoS enforcement at media speed supported by end-to-end, in-band flow control mechanisms through the switch fabric
      • Real-time traffic support, for example TDM
    • PRS Cell Switching Devices
      Family of carrier grade shared-memory cell switch fabric devices for switching solutions from 5 Gbps up to 320 Gbps of user bandwidth (+)

      Features:

      • Enables standard based designs complying with PICMG 3.6 Cell Switching (draft) specification, an AdvancedTCA fabric interface for carrier grade applications
      • Perfect fit for the convergence of voice, video, and data traffic, thanks to its efficient QoS, bounded transit delay, and guaranteed precedence of time sensitive traffic over other traffic types
      • High priority traffic can be made fully preemptive, while alternate options can be used to guarantee bandwidth to lower priority traffic, even under high traffic load conditions, thanks to an efficient in-band congestion management mechanism
  • Artesyn Embedded Technologies  (15 of 29)
    • FlowPilot ATCA Platform Software
      FlowPilot(TM) software for the ATCA-F140, the Emerson Network Power high performance, high bandwidth 40G ATCA hub blade, adds packet forwarding techniques beyond standard built-in switching and routing protocol support. FlowPilot allows you to manage the switching hardware to achieve lowest latency, full wire speed packet, and flow context aware packet distribution to and from all processing blades in your AdvancedTCA platform. (+)

      Features:

      231320965142302672.jpg
      • Balance traffic to multiple AdvancedTCA® blades for packet monitoring and processing
      • Maintain flow context and packet sequence
      • Fully transparent for external network elements
    • FlowPilotâ„¢
      Emerson’s FlowPilot™ software adds packet forwarding techniques beyond the standard switching and routing protocol support built-in to its ATCA-F140 high performance 40G ATCA hub blade. As a high bandwidth traffic flow separator and load balancer, FlowPilot can maintain flow context and packet sequence while separating traffic into application groups. FlowPilot allows you to manage the switching hardware to achieve lowest latency, full wire speed packet, and flow context aware packet distribution to and from all processing blades in your AdvancedTCA platform. FEATURES: High bandwidth traffic flow separator and load balancer ƒBalance traffic to multiple AdvancedTCA® blades for packet monitoring and processing Maintain flow context and packet sequence ƒƒFully transparent for external network elements Separate traffic into application groups Redundant 160G external Ethernet connectivity 480Gbit/s internal bandwidth for packet processing [...] (+)

      Features:

    • FlowPilot Packet Balancing Software for ATCA Platforms
      Artesyn’s FlowPilot™ software adds packet forwarding techniques beyond the standard switching and routing protocol support built-in to its ATCA-F140 high performance 40G ATCA hub blade. As a high bandwidth traffic flow separator and load balancer, FlowPilot can maintain flow context and packet sequence while separating traffic into application groups. FlowPilot allows you to manage the switching hardware to achieve lowest latency, full wire speed packet, and flow context aware packet distribution to and from all processing blades in your AdvancedTCA platform. The ability to monitor and process data streams on the fly is appealing in many application areas. Wireline and wireless carriers have an interest to provide contractually agreed services and quality. Enterprises extend their classical firewalls with highly sophisticated intrusion prevention systems. Service providers are interested in statistics about subscriber behaviors. FEATURES: High bandwidth traffic flow separator and load balancer Balance traffic to multiple AdvancedTCA® blades for packet monitoring and processing Maintain flow context and packet sequence Fully transparent for external network elements Separate traffic into application groups Redundant 160G external Ethernet connectivity 480Gbit/s internal bandwidth for packet processing [...] (+)

      Features:

    • ATC250
      The ATC250 is a high-density, dual-input converter offering board manufacturers a ruggedized, compact solution for generating onboard power in high-density AdvancedTCA environments (+)

      Features:

      43542.jpg
      • Occupies up to 40% less space than others
      • Fully integrated input power entry module and intermediate bus converter solution for high density AdvancedTCA applications
      • I2C serial bus interface for monitoring and reporting
    • Centellis 4100 ATCA 10GbE Platform
      AdvancedTCA platform (+)

      Features:

      33451.jpg
      • AdvancedTCA shelf to deliver 5-nines availability into central office environments
      • 13U/19" chassis with 14 vertical blade slots
      • Fault-resilient design to minimize hardware induced failures
    • Centellis 4000 Series ATCA Communications Server
      Series of AdvancedTCA communications servers (+)

      Features:

      33322.jpg
      • Integrate 10 Gbps Ethernet switching, a wide range of payload blades and enabling software
      • Suitable for applications requiring high bandwidth and high performance
      • Portfolio extends from individual blades and modules through fully integrated and validated MicroTCA and AdvancedTCA communications servers [...]
    • ATCA-S120
      The ATCA-S120 is a cost-effective, direct attached storage solution for in-shelf AdvancedTCA applications (+)

      Features:

      41657.jpg
      • AdvancedTCA storage blade with four (4) mid-size AMC slots
      • Additional storage via RTM mounted HDDs
      • Up to 876 GB of storage on a single blade
    • IPM300
      A rugged quarter brick 300 W dual-input power module solution implementing dual-redundant, hot-swap -48 V inputs with EMI filtering for AdvancedTCA (ATCA) boards (+)

      Features:

      • Optimized footprint for high density ATCA applications
      • Accepts inputs from -48 V and B Feeds
      • Hot swap and O-Ring functionality
    • IPM300
      A rugged quarter brick 300 W dual-input power module solution implementing dual-redundant, hot-swap -48 V inputs with EMI filtering for AdvancedTCA boards (+)

      Features:

      47321.jpg
      • Optimized footprint for high density ATCA applications
      • Accepts inputs from -48 V and B Feeds
      • Hot Swap and ORing functionality
    • ATCA-9405
      40G AdvancedTCA payload blade (+)

      Features:

      • Dual OCTEON(r) II CN6880 processors from Cavium each with 32 cnMIPS cores running at up to 1.5GHz
      • Enables packet processing applications at line speeds of 40Gbps
      • Two 40G AdvancedTCA data fabric connections
    • Centellis 3406 ATCA Communications Server
      AdvancedTCA Communications Server (+)

      Features:

      33059.jpg
      • Fully integrated and verified AdvancedTCA based communications server
      • RoHS (5 of 6) compliant
      • 14-slot, 19", 12.5U form factor
    • Centellis 3600 ATCA Communications Server
      AdvancedTCA Communications Server (+)

      Features:

      33060.jpg
      • Fully integrated and verified AdvancedTCA based communications server
      • RoHS (5 of 6) compliant
      • 16-slot, 23", 12.5U form factor
    • ATCA-7470
      The Emerson Network Power ATCA-7470 is a 40G AdvancedTCA (ATCA) packet processing blade that enables the highest packet processing performance and security features in an ATCA form factor. The ATCA-7470 is designed to exploit the full capabilities of the two 8-core Intel Xeon processors E5-2600 family and Intel Communications Chipset 89xx Series, with an optimized balance of processing, memory, I/O, data movement and interfaces. (+)

      Features:

      217414316442796556.jpg
      • Two 8-core Intel Xeon processors, E5-2648L, 1.8 GHz
      • Up to 128GB main memory
      • Powerful hardware off-loading functions for en/decryption, compression, pattern look-up, based on two Intel Communications Chipset 8920
    • AXP640 40G AdvancedTCA Shelf
      Specifically designed to address carrier-grade requirements desired by the telecommunications industry as well as high availability enterprise environments. (+)

      Features:

      185979506184183131.jpg
      • The heart of the AdvancedTCA (ATCA) shelf is the 40G backplane. This allows for 40Gbps communication across the PICMG 3.1 fabric interface
      • Using this technology, it is possible to upgrade to 40GbE capable switch and payload blades in the future without replacing the shelf infrastructure
      • Equally important are the thermal characteristics of the AXP640 shelf. It is designed to exceed the CP-TA B.4 and newly defined PICMG thermal profile, the highest level possible
    • ATCA-7360
      The ATCA-7360 AdvancedTCA high-performance processor blade features two quad-core Intel Xeon processors and suits communications equipment needing powerful server class performance (+)

      Features:

      • Two, quad-core Intel Xeon processors L5518 (2.13 GHz)
      • Up to 80 GB main memory
      • Hot-swappable hard disk with flexible choice of storage options
  • Astute Networks  (1)
  • Avnet Electronics Marketing  (7)
    • ATCA Carrier Cards
      AdvancedTCA carrier cards for integrating CompactPCI and Compact Packet-Switching Backplane (cPSB) cards into an AdvancedTCA environment (+)

      Features:

      • Entry-level AdvancedTCA Base Interface carrier card provides interconnection to the PICMG 3.0-compliant data transport section, 10/100/1000Base-Tx fabric data interconnectivity in a dual star configuration, and an onboard IPMI controller
      • AdvancedTCA Full Mesh carrier card provides complete fabric interface connectivity for any CompactPCI boards,
      • Onboard Gigabit Ethernet switch with full mesh connectivity and alternate topologies including dual star, dual dual star, and limited meshes
    • ATCA-F1 Dual AMD Opteron® Blade PDSi
      The ATCA-F1 blade features two dual-core or quad-core AMD Opteron CPUs for high performance and low power consumption (+)

      Features:

      39364.jpg
      • Up to 32 GB 667 MHz memory
      • An AdvancedMC site and RTM interface provide I/O expansion capability (using PDSi ATCA-RT01)
      • This is a robust general-purpose server platform for telecom, aerospace, military, and enterprise AdvancedTCA systems
    • ATCA-RT01 Advanced RTM w/ Video & Storage
      The ATCA-RT01 provides high reliability SAS storage, VGA video output and additional I/O functionality for AdvancedTCA systems using x86 processor blades from PDSi or Sun Microsystems, plus Sun's Netra CP3260 blade (+)

      Features:

      39363.jpg
      • For telecom, aerospace, and military systems requiring a mix of these compute blades, the ATCA-RT01 can provide a common RTM solution
      • NEBS Level 3 compliant
      • Windows and Linux compatible
    • ATCA-F1 Blade
      Dual AMD Opteron AdvancedTCA blade with RTM Interface is a robust, high-performance general purpose AdvancedTCA compute platform for telecom, miltary, and aerospace applications (+)

      Features:

      39450.jpg
      • Two dual-core or quad-core AMD Opteron CPUs for high-performance and low power consumption
      • Up to 32 GB 667 MHz memory in four DIMM sockets
      • Zone 3 RTM interface provide I/O expansion capability using PDSi ATCA-RT01
    • ATCA-N1 (Dual Intel Xeon E5 ATCA)
      The ATCA-N1 blade is a high performance computing platform that is designed to provide maximum computing, memory and storage flexibility in a single ATCA chassis slot (+)

      Features:

      • Intel-based AdvancedTCA blade server utilizing Intel’s 32 nm processor technology
      • Dual purpose memory sockets enable the use of up to 4 x SATADIMM solid state drives
      • mSATA solid state drive provides flexible expansion storage/boot option
    • Xilinx AdvancedTCA Reference Design Kit
      Xilinx 2VP50 or 2VP70 FPGA (+)

      Features:

      20410.jpg
      • CompactFlash programming card
      • PICMG compatible board form factor
      • 128 MB DDR SDRAM
    • AdvancedTCA Reference Design Kit
      Xilinx 2VP50 or 2VP70 FPGA (+)

      Features:

      20419.jpg
      • CompactFlash programming card
      • PICMG compatible board form factor
      • 128 MB DDR SDRAM
  • Carlo Gavazzi Computing Solutions  (2)
    • ATCA Starter Kit
      A complete AdvancedTCA development system (+)

      Features:

      • Available with a six slot, full mesh backplane that supports the AdvancedTCA PICMG 3.0, 3.1, 3.2, 3.3, 3.4, and 3.5 specifications
      • Supports AdvancedTCA hardware and software testing and development
      • Can be used as a system for proof of concept and customer demonstrations
    • AdvancedTCA Filler Panels
      8U x 6HP form factor (+)

      Features:

      • EMI gasket provided [...]
  • Comtel Electronics GmbH  (15 of 18)
    • Intelligent 300 W Thermal Load Board
      If you are qualifying high-power blades and you are not sure how airflow test reports apply to you, we have the answers (+)

      Features:

      44436.jpg
      • AdvancedTCA blades are drawing more power and getting denser
      • Comtel Electronics is now offering a way to test the most important characteristic of your AdvancedTCA chassis – temperature
      • Comtel's load board is controlled via any AdvancedTCA compliant shelf manager using standard IPMI commands
    • ATCA CO14N
      Nine-inch rack-mount 13U system (+)

      Features:

      43782.jpg
      • 4-slot 8U front boards and RTM
      • Full Mesh and Dual Star topologies available
      • 4 slot high performance Backplane, 10 Gbps
    • ATCA CO14 - 14 Slot 13U
      AdvancedTCA 13U, 14 slot Central Office Shelf 19" rackmount 13U system, dual star and full mesh backplanes topologies (+)

      Features:

      34099.jpg
      • Designed for compliance to NEBS and EN levels
      • 19" 14 slot main and RTM
      • 14 slot 10 Gbps backplane, with dual star topologies fabric connections
    • ATCA CO5 - 5 Slot 5U
      AdvancedTCA 5U, 5 slot Horizontal Central Office Shelf (+)

      Features:

      34098.jpg
      • 19" rack mounted or desktop 5U system with redundant PPS M500 Or Motorola M100 ShMC, redundant PEM and redundant cooling
      • 19" 5 slot horizontal Main and RTM
      • 5 slot 10 Gbps Backplane, with replicated full mesh fabric connections
    • ATCA CO16 - 16 Slot 13U ETSI
      AdvancedTCA 13U, 16-slot Central Office shelf, ETSI System dual star and full mesh backplanes topologies (+)

      Features:

      34100.jpg
      • Designed for compliance to NEBS and EN levels
      • 19" 16-slot front boards and RTM
      • ETSI 13U (574 mm) system
    • ATCA CO2 - 2 Slot 2U
      AdvancedTCA 2U, 2 slot horizontal Central Office Shelf 19" rack mounted or desktop 2U system with redundant PPS ShMC M500, redundant PEM and redundant cooling (+)

      Features:

      34095.jpg
      • 19" two slot horizontal front boards and RTM
      • Redundant PPS ShMC M500
      • Redundant EMC filtered power feeds
    • ATCA CO6 - 6 Slot 5U
      AdvancedTCA 5U, 6-slot Horizontal Central Office Shelf 19" rack mounted or desktop 5U system with redundant PPS ShMC M500, redundant PEM and redundant cooling (+)

      Features:

      34096.jpg
      • 19" 6 slot horizontal front boards and RTM
      • Redundant PPS ShMC M500
      • Redundant EMC filtered power feeds
    • CO14-G4
      The new flagship 14-slot chassis is Comtel’s “4th Generation” and the latest in high performance platforms for ATCA! Appropriately named, CO14-G4, this Chassis is a 14U height 14 slot AdvancedTCA® chassis supports full mesh, dual star and dual-dual star topologies backplanes it is DC powered and has front-to-back cooling (+)

      Features:

      293955169861218271.jpg
      • 450W or 600W per slot Cooling Options
      • Ultra high performance Air-/-Plane backplane supporting
      • 40 Gbps and now 100 Gbps "ready'!
    • ComtelCO2-3U System
      19” rack mounted 3U system (+)

      Features:

      36004.jpg
      • AC / DC Economy AdvancedTCA Version
      • 2 slot horizontal front boards and R
      • 2 slot high performance backplane, 6.25 Gbps with full mesh fabric connections
    • 2 slot AdvancedTCA NEBs compliant. CO-2
      19" rack-mounted 3U system (+)

      Features:

      22163.jpg
      • 2 slot horizontal front boards and RTM
      • 2 slot high performance backplane
      • 6.25 Gbps with replicated full mesh fabric connections
    • Thermal Load Board
      Designed for analysis of cooling efficiency of AdvancedTCA chassis (+)

      Features:

      34103.jpg
      • Front and RTM loads
      • Managed over IPMB from the ShMC
      • Front - Power dissipation up to 200 W
    • 8 slot AdvancedTCA NEBs compliant. CO-8
      19” rack-mounted 7U system (+)

      Features:

      • 8 slot horizontal front boards and RTM
      • 8 slot high performance backplane
      • 6.25 Gbps with replicated full mesh fabric connections
    • 14 slot AdvancedTCA NEBs compliant. CO-14
      19” rack-mounted 13U system (+)

      Features:

      • 14 slot 8U horizontal front boards and RTM
      • Full Mesh and Dual Star topologies available
      • 14 slot high performance backplane
    • CO-14 DS AdvancedTCA Central Office Shelf
      14 slots electrically and mechanically compliant to the PICMG 3.0 AdvancedTCA specification (+)

      Features:

      18688.jpg
      • Front boards and Rear Transition Module (RTM) assemblies accommodated
      • Rack and Shelf are designed to meet EMC standards
      • Afull function Shelf Management providing FRU Control and Shelf Management Controller (ShMC) functions for the shelf FRU's and for compliant user Board Assemblies
    • 10U Black Star AdvancedTCA Central Office Shelf
      A 10U height for maximum rack density (+)

      Features:

      • A single 2U standalone c module which services two shelves
      • 14 slots electrically and mechanically compliant to the PICMG 3.0 AdvancedTCA specification
      • 14 front boards and 12 Rear Transition Module (RTM) assemblies accommodated
  • ELMA Electronic  (15 of 24)
    • 6-slot ATCA Backplane
      Elma Bustronic Corporation, an industry leading designer and manufacturer of high performance backplanes has announced a 6-slot AdvancedTCA Backplane in a Mesh topology (+)

      Features:

      • The flexible design also allows a Dual Star topology to be implemented
      • The 6-slot AdvancedTCA backplane now features standard MicroTCA connectors used for connections to Elma's IPM Sentry shelf manager
      • The small and dense connector minimizes the space used on the backplane
    • 5U ATCA Dev. Chassis
      A PICMG 3.0-compliant, horizontal 5U AdvancedTCA development chassis (+)

      Features:

      • 700W AC-input power supply provides 48V at 15A
      • Five-slot AdvancedTCA backplane supports implementing Full Mesh, Replicated Mesh, and Dual Star topologies
      • Backplane has options for plugging with the IPM Sentry shelf manager
    • 2nd Generation AdvancedTCA handle
      2nd Generation AdvancedTCA handle that does not require assembly (+)

      Features:

      • The one-piece handle simply has two screws to attach it to the panel/PCB
      • Engaged/disengaged with a unique slide-motion solution
      • Prevents the handle from being accidentally tripped or bumped into and broken
    • PICMG-based Backplanes
      Backplanes compliant to the PICMG 2.0 (CompactPCI), 2.16 (Ethernet Packet Switching, cPSB), 3.0 (AdvancedTCA), and MicroTCA.0 specifications (+)

      Features:

      330585.jpg
      • Bustronic is the industry leader in PICMG-based backplanes and offers the widest standard selection
      • Our custom backplane expertise in these architectures is second-to-none
      • We also offer the largest selection of PICMG-based system accessories, including load boards, extender cards, air baffles, RTMs, and SerDes test modules. Bustronic's signal integrity studies help ensure the performance of your high-speed backplane design
    • 13U ATCA chassis
      AdvancedTCA platforms come in 4U, 5U, 12U, and 13U heights (+)

      Features:

      18111.jpg
      • Include a wide range of backplane and shelf management
      • Three standard backplane options through backplane subsidiary, Bustronic
      • Backplanes include a 5-slot replicated mesh, a 14-slot dual star, and a 14-slot mesh with a section below the cards for plugging power entry modules and fan trays
    • 2nd gen 5U AdvancedTCA Chassis
      Elma Electronic Inc., a global manufacturer of electronic packaging products, has upgraded its 5U AdvancedTCA chassis with full redundancy (+)

      Features:

      38556.jpg
      • The system platform offers dual redundant fan trays, shelf managers, and A/C power supply options
      • The 2nd Gen 5U AdvancedTCA Chassis features side-to-side cooling via plug-in fan trays with dual 170 CFM fans with Pulse Width Modulation control. The redundant push/pull configurations of the fans offer higher levels of reliability
      • The fans reach the back of the chassis for cooling the rear I/O slots
    • ATCA front panel
      AdvancedTCA front panels that offer a more precise and finished look (+)

      Features:

      37001.jpg
      • Elma offers the extruded AdvancedTCA panels in two versions
      • The first version has a .5 mm deep channel for overlays (typically a printed lexan substrate with pressure-sensitive adhesive on the back side) to be placed
      • The other version is for silk-screening/painting and does not have a channel
    • 4U Type 39 ATCA
      A 4U, 5-slot, horizontal AdvancedTCA chassis (+)

      Features:

      14944.jpg
      • Designed to hold five 8U x 280mm blades on 1.2” spacing
      • Rear I/O options for 8U x 70mm cards
      • Chassis versions in both sheet metal and modular packaging designs
    • 2nd Gen Carrier-Grade AdvancedTCA Chassis
      2nd generation 13U AdvancedTCA system platform for carrier-grade applications (+)

      Features:

      33320.jpg
      • The unit has gone through advanced thermal simulation and testing and meets the requirement of at least 20-30 percent airflow in each of the 4 regions of the AdvancedTCA blade
      • This ensures even airflow distribution and helps to prevent hot spots
      • The chassis is geared for full NEBS compliance, including pluggability and redundancy for all FRUs [...]
    • ATCA backplanes
      AdvancedTCA backplanes have routing implemented for radial Intelligent Platform Management Bus (IPMB) signals (+)

      Features:

      36140.jpg
      • Radial IPBM provides dual segment access to every IPM controller even when only one shelf manager is present or operational
      • This is an important option for AdvancedTCA systems to provide higher reliability and redundancy
      • The backplanes also feature 14-slots with a Dual Star routing topology
    • 40G ATCA Backplanes
      40G AdvancedTCA (ATCA) Backplanes based on the design principles of IEEE 802.3-2008 and IEEE 802.3ba-2010 standards (+)

      Features:

      52974.jpg
      • 4 channels x 10 Gbps
      • Controlled-impedance stripline design of 18 layers in a Dual Star routing configuration
      • 10Gbps/link performance can be achieved
    • AdvancedTCA, CompactPCI/2.16, MicroTCA, Custom
      New 40G AdvancedTCA backplanes, test reports available upon request (+)

      Features:

      • CompactPCI/2.16 backplanes in Pluggable, EasyCable, and Low Profile versions
      • MicroTCA backplanes in various configurations, including active version with IPMB for power and cooling intelligence
      • Largest selection of test accessories for cPCI, ATCA, MTCA (AMC), etc.
    • IPM Sentry Interface Board
      An interface board for the Elma IPM Sentry Shelf Manager (+)

      Features:

      17067.jpg
      • Allows flexibility in how and where the shelf managers are plugged into CompactPCI, AdvancedTCA, or other system architectures
      • Enables the shelf manager to be hot swapped in a chassis where a dedicated slot for plugging onto the backplane is not feasible
      • Within or outside the card cage area placement aids design flexibility
    • AdvancedTCA 13U
      An AdvancedTCA platform (+)

      Features:

      17707.jpg
      • 19" rack mount, fully compliant to PICMG 3.0
      • 13U x 444mm (W) x 385mm (D)
      • 14-slot Dual Star backplane, 2 HMB, 12 node slots
    • 5U AdvancedTCA chassis
      5U AdvancedTCA chassis with full redundancy (+)

      Features:

      31171.jpg
      • Dual redundant fan trays, shelf managers, and A/C power supplies
      • Optional shelf managers
      • Optional A/C power
  • Elma Electronic  (1)
    • ATCA Chassis with 14-Slot 40-GigE Backplane
      Elma's latest AdvancedTCA chassis platform handles even the toughest cooling challenges by providing up to 500 watts per slot cooling (see test results). The riveted construction makes the chassis strong yet easy to manufacture in volumes, thereby controlling costs. Designed to meet NEBS and EMC compliance requirements. The chassis ships with a 14-slot, dual star 40GigE backplane, either for AC or DC power. (+)

      Features:

      333463795621883012.jpg
      • Holds up to 14 AdvancedTCA based blades & rear I/O cards
      • Tested for up to 500W per slot cooling capability
      • High performance 40 Gigabit Ethernet backplane
  • Elma Electronic - Systems  (1)
    • ATCA7365 SystemPak
      High performance, multiprocessing system platform designed to address compute-intensive requirements in command and control data center applications (+)

      Features:

      52856.jpg
      • Combines the high performance multiprocessing of an integrated AdvancedTCA platform with a ruggedized design capable of withstanding the high shock and vibration found in rugged mobile transport applications
      • Successfully tested to withstand a 36" drop shock test per MIL-STD-810G
      • Three AdvancedTCA processor blades, each with two six-core Intel processors as standard
  • EPT, Inc. USA  (3)
    • ATCA PowerConnector
      AdvancedTCA Zone 1 Power Connector (+)

      Features:

      34733.jpg
      • 8 power contacts and 22 signal contacts, as described in the PICMG specification AdvancedTCA 3.0 R2.0
      • ept maximizes contact reliability with gold over nickel at the contact area and RoHS compliant tin at the press-fit section
      • ept's proven “Tcom press” -fit section is added to the contact for highly reliable and efficient manufacturing
    • AMC.0 B+ Connectors
      170-circuit AdvancedMC connector solution for signal transmission up to 12.5 Gbps, with low cross talk (+)

      Features:

      37440.jpg
      • ept's AMC.0 B+ connectors support PICMG AdvancedTCA industry specifications
      • The new press-fit design was optimized to provide significant cost and reliability advantages over other termination technologies
      • The press-fit process allows for the use of a standard ‘flat rock' insertion tool, requiring no custom tooling
    • AdvancedTCA B+/MicroTCA
      12.5 Gbps signal speeds, with minimal loss of signal integrity (+)

      Features:

      30212.jpg
      • Rugged design with ept T-com industry proven press-fit insertion technology
      • Easily routed signal paths with off-set pin designs
      • High density cost-effective solution when compared directly to compression fit designs
  • F9 Systems, Inc.  (7)
    • ASI-SIG SI Test Kit
      ASI-SIG Tx/Rx SignalBlade AdvancedTCA Test Kits (+)

      Features:

      31217.jpg
      • Provide engineers with the hardware needed to verify the signal integrity characteristics of AdvancedTCA Physical Layer signals and backplane designs
      • Use the Single SignalBlade AdvancedTCA ASI Validation Test Kit measures AdvancedTCA backplane Impedance and coupled Near End Crosstalk (NEXT) – (Open source Destination)
      • Monitors the active Tx and Rx signals across an AdvancedTCA backplane to insure ASI SIG protocol and signal quality
    • Fulcrum9 Tx/Rx BenchBlade
      AdvancedTCA compatible design using the right angle male HM-ZD connector for bench testing AdvancedTCA hub and node card (+)

      Features:

      20405.jpg
      • Provides four (4) Transmit and four (4) Receive pairs to test a complete AdvancedTCA channel
      • Edge-launch SMAs for superior bandwidth and ease of test cable attachment
      • Differential impedance of 100 W ±5%
    • THERMALBLADE
      AdvancedTCA compatible design (+)

      Features:

      19806.jpg
      • Provides a thermal load of up to 200 W per slot from a redundant AdvancedTCA –48 VDC backplane
      • Operates over the entire –36 to –72 VDC voltage range without damage to thermal board
      • Mimics aerodynamics of a typical high performance board
    • F9 Systems Tx/Rx SignalBlade
      AdvancedTCA compatible design using the HM-ZD backplane connector (+)

      Features:

      20406.jpg
      • Provides four (4) Transmit and four (4) Receive pairs to test a complete AdvancedTCA channel
      • Edge-launch SMAs for superior bandwidth and ease of test cable attachment
      • Flexible connector alignment (because connector guides are removed), allows all signals to be easily probed
    • ATCA TX/RX SIGNALBLADE
      AdvancedTCA compatible design using the HM-ZD backplane connector (+)

      Features:

      19807.jpg
      • Provides four Transmit and four Receive pairs to test a complete AdvancedTCA channel
      • Edge-launch SMAs for superior bandwidth and ease of test cable attachment
      • Differential impedance of 100 ohms +/- 5%
    • F9 Systems ThermalBlade
      AdvancedTCA compatible design (+)

      Features:

      20431.jpg
      • Test air flow, power load, and thermal performance of your chassis, logic cards, and backplane
      • Provides a thermal load of up to 200 watts per slot from a redundant AdvancedTCA 48 VDC backplane
      • Operates over the entire -36 to -72 VDC voltage range without damage to thermal board
    • F9 Systems RTM ThermalBlade
      AdvancedTCA compatible design (+)

      Features:

      20432.jpg
      • Provides thermal load of up to 50 watts per slot
      • Operates over the entire -36 to -72 VDC voltage range without damage to thermal board
      • Mimics aerodynamics of a typical high performance board
  • Intel  (10)
    • Intel NetStructure® MPCBL0001 High-Performance Single Board Computer
      High-Performance Single Board Computer (+)

      Features:

      • Compliant with AdvancedTCA specifications
      • Can achieve greater performance levels than have been previously supported on standards-based blade products
      • Designed to interoperate with the entire family of Intel's AdvancedTCA-compliant products, including the AdvancedTCA-compliant 14U shelf, and with third party building blocks meeting the PICMG 3.0 specification [...]
    • Intel NetStructure® MPCMM0001
      Chassis Management Module (+)

      Features:

      • Compliant with AdvancedTCA specification
      • Provides the interface between platform hardware and system software, supporting higher level management interfaces
      • The CMM is the single point of administration and information for all the components in an AdvancedTCA compliant chassis
    • IXB28504xGbEFS Secure Packet Processing Blad
      High performance secure packet processing blade (+)

      Features:

      • AdvancedTCA form factor
      • Intel IXP2850 1.4 GHz network processor with built-in support for IPsec encryption algorithms
      • Suitable for telecommunications grade applications requiring secure multi-gigabit data rates in IP Multimedia Subsystem (IMS), wireless, and other edge/access environments
    • Intel NetStructure® IXB28504xGbEFS
      Secure Packet Processing Blade (+)

      Features:

      • High-performance AdvancedTCA blade
      • Intel IXP2850 network 1.4 GHz processor
      • Built-in support for IPsec encryption algorithms
    • Intel NetStructure® MPCHC0001 14U Shelf
      14U shelf, compliant with AdvancedTCA specifications (+)

      Features:

      22208.jpg
      • Redundant –48 VDC power
      • Redundant management modules
      • Hot-swappable fan tray assembly supports the demanding telecommunications application environment
    • Intel NetStructure MPCBL0001
      Single Board Computer compliant with the AdvancedTCA specification (+)

      Features:

      • Dual Low Voltage Intel Xeon 2.0 GHz processor with a 400 MHz system bus
      • Intel NetBurst microarchitecture
      • Designed to interoperate with Intel's AdvancedTCA products and with third-party building blocks meeting the PICMG 3.0 specification
    • Intel NetStructure MPCBL0001
      A high-performance single board computer compliant with AdvancedTCA specifications (+)

      Features:

      • Designed to interoperate with the entire family of Intel's AdvancedTCA-compliant products and with third-party building blocks meeting the PICMG 3.0 specification
      • 2.0 GHz with 400 MHz system bus provides outstanding value
      • Integrated 512 KB L2 Cache
    • MPCHC0001 14U Shelf Product Brief
      14U shelf (+)

      Features:

      • Compliant with AdvancedTCA specifications
      • Redundant –48 VDC power
      • Redundant management modules
    • MPCBL0001 High-Performance SBC
      Compliant with AdvancedTCA specification (+)

      Features:

      • Dual Low Voltage Intel Xeon processors (2.0 GHz)
      • 400 MHz system bus
      • Designed to interoperate with AdvancedTCA products from Intel and with third-party building blocks meeting the PICMG 3.0 specification
    • MPCHC0001 14U Shelf
      14U shelf (+)

      Features:

      • Compliant with AdvancedTCA specifications
      • Redundant –48 VDC power
      • Redundant management modules
  • JumpGen Systems  (3)
    • PRA-200 ATCA Node
      The PRA-200 ATCA Node Blade is a single-slot AdvancedTCA blade supporting 1 or 2 Intel low voltage Xeon Quad-Core Processors and either AdvancedMC, PMC, or SATA HD expansion options (+)

      Features:

      38940.jpg
      • 1 or 2 low-power Intel Xeon processor L5408 (quad-core) running up to 2.13 GHz or Intel Xeon processor L5238 (dual-core) up to 2.66 GHz or other Intel Xeon processors 5400, 5300, 5200, and 5100 Series
      • Intel 5100 Memory Controller Hub supporting Front Side Bus up to 1333 MHz
      • Up to 32 GB of ECC DDR2 memory running at 667 MHz
    • T6M-100
      AdvancedMC (PrAMC) platform (+)

      Features:

      38569.jpg
      • TILE64 processor with 64 cores running at 700 MHz
      • 2 GB of ECC DDR2 memory running at 800 MHz
      • Up to 8 GB of persistent memory
    • T6M-100 PrAMC
      64-core processor card is a high-performance Processor AdvancedMC (PrAMC) card designed for use in AdvancedTCA or MicroTCA systems (+)

      Features:

      38844.jpg
      • TILE64 processor with 64 cores running at 700 MHz
      • 2 GB of ECC DDR2 memory running at 800 MHz
      • Up to 8 GB of persistent memory
  • Kaparel Corporation  (11)
    • ATCA System Platforms
      High-speed backplanes,10 Gbps, designed for advanced switching, Ethernet, InfiniBand, S-RapidIO Star Fabric (+)

      Features:

      • Shielding for NEBs, FCC, and EU standard
      • Stainless steel construction,corrosion resistance
      • AdvancedTCA System solutions available 13U, 12U, and 5U configurations
    • Customizable AdvancedTCA Shelf
      A Full-Mesh 13U, 14-slot AdvancedTCA shelf (+)

      Features:

      17468.jpg
      • Complies with the PICMG 3.0 specification
      • Accommodates 14 slots of 8U x 6HP x 280 mm boards and 14 slots of 8U x 6HP x 70 mm Rear Transition Modules (RTMs)
      • A one-piece card guide platform also provides EMI shielding
    • AdvancedTCA Enclosures
      Case solutions in 5U, 12U, 13U, or custom (+)

      Features:

      34485.jpg
      • Climate control concepts up to 200 W/board
      • High speed backplanes up to 10 Gbps
      • Systems available up to Level 5 for AdvancedTCA and MicroTCA
    • AdvancedTCA Enclosure Family
      Rittal incorporates innovative components to produce reliably available systems up to level 5 for AdvancedTCA and MicroTCA (+)

      Features:

      30136.jpg
      • Everything is fully assembled, ready to run and individually configured
      • And the same naturally applies equally for CompactPCI, VME, and VME64x
      • Case solutions in 5U, 12U, 13U, or cube design
    • High Speed Backplanes
      Off-the-shelf and custom high-speed backplane solutions (+)

      Features:

      • Faster-to-market solutions for embedded applications
      • VME, CompactPCI, Switch Fabric, and AdvancedTCA architectures
      • Utilize quality standards and procedures and continuous improvement
    • AdvancedTCA Shelf
      Redundant brushed stainless steel AdvancedTCA shelf (+)

      Features:

      33889.jpg
      • Complies with the PICMG 3.0 specification
      • Integrated sub-rack, dual hot swap fan tray
      • 19" rack-mount, 482.6 mm, 5U, 400 mm deep
    • AdvancedTCA Face Plates
      A range of PICMG 3.0 AdvancedTCA face plates, fillers, panels, and handles in brushed stainless steel (+)

      Features:

      19851.jpg
      • Available with optional EMC gasketss; adhesive foam, adhesive finger stock, or mechanical snap-in styles
      • Handle locking device acts as a grounding feature and securely locks the handle under seismic Zone 4 conditions (NEBS Level 3) [...]
    • AdvancedTCA Faceplates
      A complete range of PICMG 3.0 AdvancedTCA face plates, filler panels and handles in brushed stainless steel (+)

      Features:

      • Each Face Plate comes with 2 locking latches attached
      • Face Plates provide for the I/O interface
      • Filler Plates are used in place of unused/reserved slots and provide for EMI protection and air-flow management
    • AdvancedTCA Developer Chassis
      AdvancedTCA development platform (+)

      Features:

      15027.jpg
      • Intended for developers of telecom systems designed to comply with the PICMG 3.0 specification
      • Provides a 19” open sided bench top with a Kaparel full-mesh or dual star architecture 14-slot backplane
      • The 13U x 84HP chassis accommodates 14-Slots of 8U x 6HP x 280mm front boards and 8U x 6HP x 70mm rear-transition modules
    • AdvancedTCA Backplane
      14-slot fabric interface with full mesh interconnect (+)

      Features:

      20385.jpg
      • Base interface with dual star interconnect
      • Split power distribution (odd slots on A1/B1, even slots on A2/B2)
      • Bused IPMI-0 connections (optional configuration allows for radial connections)
    • Backplanes
      CompactPCI backplanes designed to accommodate rear mount , low profile bridge modules (+)

      Features:

      41088.jpg
      • CPCI- PICMG 2.16 Ethernet Packet Switching Backplane specification
      • CPCI- PICMG 2.17 Star Fabric Specification
      • CPCI- CompactPCI H.110
  • Kontron  (15 of 20)
    • XL8000 ATCA Chassis 12U NEBS Compliant
      12U height, 19" rack-mount (+)

      Features:

      22038.jpg
      • Cost effective riveted steel construction
      • 200 W per slot cooling
      • Two dual Xeon AdvancedTCA processor boards
    • XL8500
      Suitable for software or hardware developers wanting to use AdvancedTCA CPU blades together with a hub blade (+)

      Features:

      • Can also be used to exploit AdvancedTCA blades with the full mesh backplane in a small form factor chassis of only 5U
      • With the redundant shelf manager and the full rear I/O possibilities, no AdvancedTCA feature will suffer any disadvantage due to the smaller form factor
      • The system comprises a 5U/84HP rack with either a 750 W wide range AC power supply or a 48 VDC input and enough airflow to cool all blades [...]
    • OM9020
      High-performance, small-footprint AdvancedTCA content storage platform (+)

      Features:

      36487.jpg
      • Suits IPTV and Video on Demand applications
      • Kontron AT8030 AdvancedTCA node board designed with three Intel Core 2 Duo processors
      • Astute Networks' Caspian AdvancedTCA storage blade provides iSCSI and RAID-5 storage performance and a storage density of 1.25 TB/slot (using 300 GB/10K SAS drives)
    • AT8902
      A PICMG 3.0 and 3.1 compliant hub board for AdvancedTCA shelves (+)

      Features:

      34797.jpg
      • Suitable for dual-star and full-mesh configurations in 14- and 16-slot systems
      • Provides 2 mid-size or full-size AMC slots for customization
      • Allows cost-optimized tailoring to the requirements of the application
    • AM4100
      1.5 GHz Dual Core Freescale PowerPC MPC8641D (+)

      Features:

      33527.jpg
      • Up to 2.3 MIPS/MHz computing performance and highest Ethernet bandwidth suitable for modular AdvancedTCA carriers or highly integrated, redundant MicroTCA multiprocessing systems
      • Integrated Altivec 128-bit Vector Processing Unit, which also replaces DSPs
      • Fits telecommunication equipment manufacturers and enterprise datacoms' needs
    • AT8904 10GbE Switch
      AdvancedTCA 10 GbE Hub board with 10 GbE AdvancedMC uplinks (+)

      Features:

      39455.jpg
      • Suitable platform for open modular-based broadband media servers used to support Video on Demand (VoD) from a library of movies, delivered over DSL or CableTV networks, as well as VoD short videos from online service platforms, such as YouTube for example, delivered to mobile phones and wireless clients
      • Two AdvancedMC slots to host any of the following: processor AdvancedMC modules as main controllers; storage AdvancedMC modules as mass storage devices for Processor AdvancedMCs
      • Dual 10 GbE uplink AdvancedMCs to interlink the Fabric
    • AM4520
      High performance, high reliability storage medium for open modular communications solutions (+)

      Features:

      33102.jpg
      • Up to 73 GB storage capacity
      • Built in accordance to the AMC.0 and AMC.3 specifications
      • 10K rpm spindle
    • AT8001 PrATCA 2xAMC
      The Kontron AT8001 AdvancedTCA processor board features a powerful combination of Intel Xeon processing with the flexible design options of two AdvancedMC slots (+)

      Features:

      24936.jpg
      • Single slot AdvancedTCA PICMG 3.0/3.1 Processor Board
      • Intel Xeon up to 2.8 GHz
      • Dual AMC.1 module support
    • AM4301
      Quad GbE module AdvancedMC unit for network applications that require multiple ports directly from an AdvancedTCA processor blade (+)

      Features:

      33103.jpg
      • Based on the Intel 82571EB Gigabit Controller, the AM4301 features 4 x 10BASE-T/100BASE-TX/1000BASE-T ports and supports PCI Express x8, x4, and x1 link and remote management via IPMI v1.5
      • As a hot swappable, Field Replaceable Unit (FRU), the AM4301 also follows the same stringent carrier grade RASM feature set
      • When offered in combination with AdvancedTCA platforms, it enables telecom equipment manufacturers to conserve valuable system slots, as the AM4301 maximizes communications I/O for Gigabit Ethernet and Fast Ethernet networks with four independent 10/100/1000 ports from a single slot [...]
    • AT8030 – 3xCore2Duo
      AdvancedTCA Triple Intel Core 2 Duo processor blade with AdvancedMC support and integrated switch for 10 GbE on fabric (+)

      Features:

      39454.jpg
      • Suitable processor node for IMS clustering applications
      • Three Intel Core2 Duo processors each with dedicated memory, plus one AdvancedMC slot and an integrated Gigabit switch fully manageable via PowerQuick III processor for 10 GbE on the fabric interface
      • Enables TEMs and NEPs who build IMS and IPTV-related equipment to run, for example, three different applications across the three independent Intel dual-core processors
    • AM4211
      The AM4211 Packet Processor AMC module is designed with the Cavium Networks OCTEON II CN6335 cnMIPS64 II 6-core processor, helping to accelerate system designs for 4G, LTE, WiMAX base station vendors (+)

      Features:

      46581.jpg
      • Platform design considerations for the Kontron AM4211 include using it as an eNodeB and LTE network element component or, in combination with full-scale AdvancedTCA blades, as a co-processor Network Interface Card (NIC)
      • The Kontron AM4211 supports 1x 10GbE to the front and is interoperable with third-party DSP AMCs. Also supported is the IEEE 1588 timestamp for Ethernet time synchronization [...]
    • AT8000 ATCA Dual Processor Board
      AdvancedTCA dual processor board (+)

      Features:

      22034.jpg
      • Dual Intel Xeon up to 2.0 GHz
      • Dual Gigabit Ethernet to the backplane
      • Optional Dual Fibre Channel interfaces
    • AT8001 ATCA processor board with 2x AMC
      Single slot AdvancedTCA PICMG 3.0/3.1 processor board (+)

      Features:

      22037.jpg
      • Intel Xeon up to 2.8 GHz
      • Dual AMC.1 module support
      • Dual DDR-II DIMM for 8 GB of PC2-3200 registered 400 SDRAM
    • AT8020
      AdvancedTCA Dual Intel Dual-Core Xeon with 2 AdvancedMC slots and up to 16 GB of DRAM (+)

      Features:

      34796.jpg
      • Dual Intel Core Duo Xeon
      • Support up to 16 GB of DDR2
      • Two mid-size AdvancedMC bays
    • AT8904 AdvancedTCA Hub Board
      Two AdvancedMC slots for added functionality (+)

      Features:

      33526.jpg
      • The two AdvancedMC slots can be used to: host processor AdvancedMC modules as main controllers or for load balancing;storage AdvancedMC modules as mass storage devices for the Processor AdvancedMC; and Network Processing Units for UDP/NAT or load balancing processing in combination with a storage AdvancedMC
      • AT8904 hub can additionally enable redundant 10 GbE interlinks of multiple AdvancedTCA chassis with the Kontron AM4310 Mid-Size 10 GbE Interlink AdvancedMC module, featuring 2x 10 GbE uplinks on the front panel via optical XFP connectors, which are routed to the XAUI ports (ports 4-7 and 8-11) on the AdvancedMC connectors
      • Modular design enables seamless 1 GbE to 10 GbE migrations for application designers who have already designed applications with previous generations of Kontron AdvancedTCA hubs
  • LeCroy Corporation  (2)
    • ATCA-100
      AdvancedTCA extender card [...] (+)

      Features:

    • SATracer 3G
      A 3-Gbps-capable Serial ATA protocol analyzer (+)

      Features:

      • Supports both SATA-I and SATA-II
      • Captures, decodes, and analyzes traffic at speeds up to 3 Gbps
      • Feature set includes decoding for the SATA-II Extensions (command queueing and port multiplier), in-depth performance metrics, and compatibility with SATA 1.5 and 3 Gbps transfer rates
  • NEI  (3)
    • A-5000 ATCA System
      A standards-based high-reliability server featuring superior performance, advanced I/O capacity, and easy manageability (+)

      Features:

      34755.jpg
      • 5-slot AdvancedTCA system with full-mesh topology for 3.125 Gbps throughout
      • Three node slots available for AdvancedTCA single board computers, or other AdvancedTCA blades
      • Dual 16-port ZNYX PICMG 3.0 GbE base fabric switches and dual Intel Shelf Managers
    • A-13000 ATCA System
      NEI's A-5000 and A-13000 carrier-grade AdvancedTCA platforms offer customers a standardized architecture for next-generation communications applications (+)

      Features:

      34760.jpg
      • These products have passed rigorous testing required by today's telecommunication organizations
      • NEI AdvancedTCA systems offer scalability and greater than 5-nines (99.999%) availability
      • With standardized packet-switched backplane topologies, node-based switching for board communications and centralized management with IPMI, the NEI A-Series family is the right architecture for carrier-grade next-generation communication applications
    • MMP for ATCA
      Dialogic Multimedia Platform for AdvancedTCA (+)

      Features:

      33776.jpg
      • Supports multimedia processing and includes voice, conferencing
      • Supports 250 to 500 universal ports with audio transcoding
      • Supports a variety of low-bit-rate and wireless coders
  • NMS Communications Corporation  (2)
    • MG 7000A ATCA Media Processor
      480 IVR, fax, conferencing, VoIP, 3G 324M video sessions (+)

      Features:

      20393.jpg
      • 16 T1/E1 ports
      • Call control for CAS, ISDN, and SIP
      • Single slot AdvancedTCA solution
    • MG 7000A
      MG 7000A AdvancedTCA Media Processor Blade is the ideal platform for network-based applications including IP media servers and enhanced service platforms for mobile voice applications (+)

      Features:

      38655.jpg
      • High-speed IP packet handling
      • Dual Gigabit Ethernet for AdvancedTCA Switch Fabric
      • Dual 10/100/1000-Base-T Ethernet for AdvancedTCA Base Fabric
  • Nortel  (1)
    • GSM-UMTS Mobile Switching Center Server
      3GPP R4 BICN VoIP support (+)

      Features:

      • All-IP network consolidation with full support of VoIP for GSM and UMTS bearers and integrated SIGTRAN
      • IP-only industrial computer based soft-switch technology
      • High Density starting from 1 Million BHCA per equipment shelf
  • Pigeon Point Systems  (6)
    • IPM Sentry ATCA Management Exerciser Board
      An AdvancedTCA form factor implementation of an AdvancedTCA IPM Controller. Suitable for bringup and testing of AdvancedTCA shelves (+)

      Features:

      • Provides broad visibility into the state of the IPM Controller, including the hardware address of its slot, temperature, and voltage measurements, hot swap state, E-Keying and power supply enable/disable state [...]
    • BMR-AVR-ATCA Board Management Reference Design
      A reference design for an AdvancedTCA IPM Controller based on the widely used Atmel AVR microcontrollers (+)

      Features:

      • Includes a schematic for the hardware and source code for the firmware
      • When integrated into a customer's AdvancedTCA board, these components form a compliant and interoperable IPM Controller
      • Tested for interoperability at PICMG-organized AdvancedTCA/AMC Interoperability Workshops
    • BMR-H8S-ATCA Board Management Reference Design
      A reference design for an AdvanceTCA IPM Controller based on the widely used Renesas H8S/2168 microcontrollers (+)

      Features:

      20054.jpg
      • Includes a schematic for the hardware and source code for the firmware. When integrated into a customer's AdvancedTCA board, these components form a compliant and interoperable IPM Controller
      • Tested for interoperability at PICMG-organized AdvancedTCA/AMC Interoperability Workshops
      • The reference design is purchased in a Board Management Starter Kit [...]
    • ShMM-300 Shelf Management Starter Kit
      Includes everything needed to build an AdvancedTCA or CompactPCI shelf manager , based on the ShMM-300 (+)

      Features:

      • Includes a schematic for a ShMM carrier board, ready for adaptation to the needs of your shelf
      • Bench top implementation of that schematic, along with a bench top IPM Controller Enables experimenting with AdvancedTCA or CompactPCI shelf management before any custom hardware is built
      • Bench top carrier comes with a ShMM-300 (containing the IPM Sentry Shelf Manager) already installed
    • IPM Sentry Shelf Mn
      IPM Sentry Shelf Manager supporting AdvancedTCA Shelf Management Controller (ShMC) cross-connects (+)

      Features:

      • Hardware and software support for recent AdvancedTCA specification improvement that adds ShMC cross-connects
      • IPM Sentry Shelf Management Starter Kit provides the hardware and software support for new shelf
      • 333 MHz MIPS processor: the AMD Au1550-333
    • ShMM-300
      Implements the hardware/software core of an AdvancedTCA shelf manager (with compatible support for CompactPCI as well) (+)

      Features:

      • SODIMM-sized ShMM-300 installed in a carrier board that is customized for a particular shelf architecture
      • The ShMM-300 and Pigeon Point's ShMM-500, provide the shelf manager core for most currently shipping AdvancedTCA shelves [...]
  • Pixus Technologies  (3)
    • Next Generation AdvancedTCA Chassis
      The Pixus next generation AdvancedTCA feature advances in cooling, backplane performance, and PEM design.  Our 13U and 15U ATCA system platforms utilize patented RiCool reverse impellar blowers for up to 400W/slot of cooling with meeting NEBS requirements and CPTA guidelines. Our 40GbE backplanes are creatively designed to keep costs at a minimum.  Contact us about 100G backplane options.  The new generation intelligent Power Entry Modules (PEMs) feature higher power options and compliance to PICMG 3.7.  With the industry's "most successful ATCA chassis design" with over 15000 global installs, choose Pixus for your AdvancedTCA system application. (+)

      Features:

      333872124883530886.jpg
      • 6U, 13U, 15U Chassis heights with next-gen upgrades
      • Superior 40GbE backplane performance while keeping costs low
      • Patented RiCool Rittal blowers for unprecedented cooling performance
    • 6U ATCA SlotSaver - 40G
      Pixus Technologies, a supplier of backplane, enclosure, and embedded component solutions, has introduced a new 6U AdvancedTCA (ATCA) SlotSaver Shelf that gains 2 slots of payload card usage, along with AC power. The density, full redundancy, and versatile power configuration is well suited for telecom, military/aerospace, and high-end networking/computing applications. (+)

      Features:

      200691083411648479.jpg
      • Combined switch/shelf manager saves 2 node slots
      • 50% more computing density
      • Simultaneous AC/DC power
    • Enclosure Platforms for AdvancedTCA, MicroTCA & CompactPCI
      The Pixus/Rittal team have develop many of the first and most commercially successful AdvancedTCA and CompactPCI systems in the industry.  With a modular design approach, Pixus offers a wealth of enclosure configuration options for the most challenging design requirements.  The company also provides a wide range of MicroTCA enclosure solutions, specializing in customized platforms. (+)

      Features:

      • Superior cooling solutions with unique RiCool reverse impeller blowers
      • Ruggedized and customized versions available
      • Backplane experts with 40G standard products and 100G in design
  • Prodrive Technologies  (1)
    • Prodrive ATCA carrier & switch blades
      Prodrive Technologies' RapidIO Gen.2 carrier (PRIOC-G2), RapidIO Gen.2 switch (PRIOSB-G2) and 10/40G Ethernet (PESB) offer flexible switching solutions in the AdvancedTCA form factor. Regardless of the networking requirements, Prodrive has the right switching solution available.Mainstream 10 and 40 Gigabit Ethernet allows integration of mainstream server blades, and linking them together in a non-blocking topology. The Ethernet blade supports open networking software to maximize value and minimize time to market.Low latency Serial RapidIO switching supports hard real-time system use cases at 100ns latency per switch, while offering 20 Gigabit per second per port in a non-blocking architecture. Two up to fourteen channels towards the backplane allow for maximum scalability within any AdvancedTCA chassis type. On the front panel, up to four 80W full-size AMC sites are supported. In addition, AMC sites can be exchanged for front connectivity using small form-factor pluggable (SFP+) or quad small form-factor pluggable (QSFP) connectors, supporting up to two meters of passive copper cabling. All blades support a Gigabit Ethernet management network as well as an IPMI utility network, to control and manage the switches out-of-band.This hardware portfolio is complemented with Prodrive's powerful, award-winning network visualization software enables customers to quickly identify hot spots in network utilization and latency, reducing customer's time-to-market. (+)

      Features:

      332725022663399807.jpg
      • Up to four 80W full-size AMC sites
      • Up to 2x QSFP, 8x SFP+ front panel connector
      • RapidIO: Serial RapidIO 2.1, up to 20Gbps per port
  • Radisys Corporation  (15 of 22)
    • ATCA-4500
      Single board computer (+)

      Features:

      42160.jpg
      • High-performance, single-slot AdvancedTCA computer module
      • Based on the single socket L5518 Intel Xeon processor
      • Suitable for control plane and server functions for LTE, wireless infrastructure, Deep Packet Inspection, IPTV, IP multimedia subsystems, and defense applications
    • FlexTCA
      AdvancedTCA deep packet inspection (DPI) solution (+)

      Features:

      47693.jpg
      • Network intelligence solutions such as Policy Charging and Enforcement Functions (PCEF) can exceed 200 Gbps while wireless core and security applications can scale up to 320 Gbps
      • Delivers up to 4 times the processing density of previous generation AdvancedTCA offerings at a price per bit savings of up to 75 percent
      • Enables network equipment providers (NEPs) to quickly and cost-effectively produce the scalable DPI applications operators need to monitor and control their network traffic while ensuring quality of service and experience (QoS/QoE)
    • FlexPacket ATCA-PP50 /FlexCompute ATCA-XE50 / FlexCore ATCA-FM40
      FlexPacket ATCA-PP50 (+)

      Features:

      36001.jpg
      • PP50 provides TEMs with deep packet inspection (DPI) capabilities to support advanced content-aware routing, traffic management, and security functions required by multi-service IP networks
      • The blade is engineered to meet the application needs of IPTV, 3G LTE aggregation gateways, and security platforms
      • Dual 1 GHz RMI XLR732 multicore MIPS64 packet processor
    • FlexPacket RTM-COP50
      A fail-to-wire Gigabit Ethernet copper bypass rear transition module for the company's flagship FlexPacket ATCA-PP50 packet processing blade (+)

      Features:

      43834.jpg
      • The COP50 is the industry's only AdvancedTCA solution that is specifically optimized for in-line Deep Packet Inspection (DPI)
      • Allows customers to avoid the cost and complexity of managing extra devices in the network while still offering protection against network outages
      • Supports in-line DPI for greater control and accuracy, resulting in lower overall system costs and higher density
    • ATCA 10GbE System
      AdvancedTCA 10 GbE traffic management and security system delivers very high performance deep packet inspection capabilities to allow TEMs to rapidly develop and deploy content-aware platforms (+)

      Features:

      33077.jpg
      • -Deep Packet Inspection for Content-Aware Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Deep Packet Inspection: Multi-core, multi-threaded MIPS64 processor -Integrated 10 Gbps security acceleration engine
    • ATCA-PP50 Packet Processing Blade
      AdvancedTCA blade supporting two multi-core RMI XLR732 packet processors (+)

      Features:

      33080.jpg
      • Delivers deep packet inspection and security capabilities for wireless aggregators, IPTV, IMS, and security
      • Two XLR732 processors, each with 8 multi-threaded MIPS cores
      • Up to 16 GB per blade, 8 GB per XLR
    • PROMENTUM ATCA-9100
      AdvancedTCA media processing blade (+)

      Features:

      35150.jpg
      • Highest density of media processing through the use of latest multicore DSP silicon from Freescale
      • Single-slot PICMG 3.0/3.1 (Option 9) compliant
      • Hosts up to 20 quad-core Freescale MSC8144 DSPs on two mezzanine cards
    • Promentum ATCA-2100
      Single slot AdvancedTCA PICMG 3.0/3.1 compliant module (+)

      Features:

      19739.jpg
      • Highly integrated fabric module: GbE base interface, Fibre Channel fabric, shelf manager, two PMC sites
      • 28-port GbE PICMG 3.0 Base fabric switch: 14 GbE links to user slots, 1 GbE link to redundant switch blade, 8 GbE links for external connections (uplinks), 4 GbE links to onboard 2 PMC sites, 1 GbE link to off-board shelf manager
      • Wire-speed L2 and L3 switching: support for 4K IEEE 802.1Q VLANs, packet classification/filtering, link aggregation, QoS, CLI, and SNMP management
    • ATCA-7240
      Third generation of products based on the Cavium Networks OCTEON family of multicore processors (+)

      Features:

      • 40G packet processing module provides a complete line-rate solution for applications found in the 4G LTE Evolved Packet Core (EPC)
      • Increased memory and I/O density, Smart Front-End support and the option for TCAM expansion
      • Designed to maintain system compatibility with the previous generation
    • Promentum ATCA-1000
      Four PCI Mezzanine Card (PMC) Sites with Front Panel Access (+)

      Features:

      19675.jpg
      • 2 PIM connections through optional RTM for sites 2 and 4
      • Onboard 8-port Gigabit Ethernet Switch (Broadcom BCM5682)
      • Internal 512KB packet buffer
    • FlexCore ATCA-FM40 10GbE Base/Fabric Switch
      Base/Fabric Switch AdvancedTCA blade (+)

      Features:

      35155.jpg
      • 10 GbE line-rate switching for 16 slots and 8 external links with 240 Gbps non-blocking fabric switch
      • Dedicated 533 MHz 440EPx PowerPC processor provides embedded switch
      • 16 slot 10 GbE (PICMG3.1 Option 9) Fabric Switch and 16-slot 10/100/1000BT Base Switch
    • ATCA-XE50
      AdvancedTCA SBC (+)

      Features:

      35159.jpg
      • Two quad-core Xeon processors
      • For deploying a wide range of 10 GbE high-performance, scalable telecom applications
      • Dual Quad-Core Xeon processing power
    • Radisys Promentum AdvancedTCA Family
      Promentum SYS-6000: platform with Carrier Grade Linux, shelf management/HPI libraries, and HA blade/switch management (+)

      Features:

      20427.jpg
      • Promentum ATCA-1000: Universal PMC Module, flexibility of PMCs in different configurations for multiple applications
      • Promentum ATCA-2100: Switch/Control Module, GbE, and Fibre Channel switch fabric for control, services, and management applications
      • Promentum ATCA-3000: Disk Storage Module, providing high-performance Fibre Channel storage
    • ATCA 40G Platforms
      Pre-integrated 40G ATCA Platforms. (+)

      Features:

      183838669505351182.jpg
      • Fixed & Mobile Broadband Networks
      • 3G & LTE Gateways including Internet Offload
      • DPI Policy Enforcement & Traffic Shaping
    • Promentum SYS-6016
      10 Gigabit (16 slot) AdvancedTCA Application Ready Platform (+)

      Features:

      44283.jpg
      • Application ready platform to address next generation requirements for RNC/BSC, Media Gateways, IMS and IPTV infrastructure
      • Meet capacity and throughput requirements easily with advanced technologies such as 10 Gigabit Ethernet, Dual-core processing, media processing, and NPU-based wire-speed 10 Gbps line cards
      • 16-slot capacity provides the maximum number of billable application slots in an ATCA carrier-grade platform
  • SOUTHCO  (4)
  • Telco Systems  (2)
    • T-HUB4
      40G ATCA switch blade to enable next generation mobile applications such as LTE and 4G as well as metro Ethernet, security, and military applications that require high performance and high availability (+)

      Features:

      • Telco Systems' T-HUB4 delivers simultaneous 10G and 40G connectivity to support AdvancedTCA service modules
      • T-HUB4 delivers an extensive networking software suite, BiNOX to provide state of the art connectivity, including switching, IPv4/IPv6 routing, MPLS, QoS, protection and redundancy, and clock synchronization to the ATCA platform
      • BiNOX is Telco Systems' field-proven, carrier grade networking operating system offering superior control and security while delivering wire speed Layer 2-4 networking
    • T6Pro Classic/Compact
      A carrier-class, multilayer routing switch optimized for metro and aggregation applications. T6Pro implements the full scope of the latest AdvancedTCA architecture (+)

      Features:

      20355.jpg
      • Available in two non-blocking chassis configurations – T6Pro Compact is 4RU and T6Pro Classic is 12RU (stackable as 10RU).
      • 10/100/1000 and 10 Gigabit Ethernet copper and fiber
      • Rapid spanning tree ensures
  • TeraChip, Inc.  (4)
    • 160 Gbps ATCA Switch Fabric Card
      The TeraChip TSC-160XUI-A1 is an operational 160 Gbps switch fabric card for standard AdvancedTCA chassis, offering the low risk, simplicity and scalability of AdvancedTCA standard devices (+)

      Features:

      18710.jpg
      • Designed for switch vendors serving the enterprise (LAN), storage (SAN), and metro (MAN) markets
      • The TSC-160XUI-A1 is based on TeraChip's TCF16X10 scalable single-chip switch fabric device, capable of switching data streams of 10 Gbps using a shared-memory architecture that supports: 16 slots of 10Gbps per slot
      • 8 priority queues per port
    • 160 Gbps Switch Fabric Solution
      AdvancedTCA compliant 160 Gbps solution (+)

      Features:

      20401.jpg
      • Single-chip based solution with low power consumption of only 15 W
      • Scalable up to 320 Gbps in an AdvancedTCA chassis
      • Switch card redundancy of 1:1 and 1+1
    • TeraChip TLC-NIC101 10Gbps ATCA Line Card
      The TeraChip TLC-NIC101 is a 10 Gbps AdvancedTCA line card constructed with TeraChip's TCI1X2RC switch interface device and EZchip NP-1c NPU and provides a 10 Gbps switch connection by 10x1 Gbps Ethernet connections (+)

      Features:

      22372.jpg
      • Supports different redundancy schemes for the fabric and for the line ports
      • Allows faster time to market for network application that can be developed based on the EZchip NP-1c network processor and the TeraChip switch fabric [...]
    • TCF16X10
      AdvancedTCA compliant 160 Gbps solution (+)

      Features:

      30215.jpg
      • Single chip-based solution with low power consumption of only 15 W
      • Scalable up to 320 Gbps in and AdvancedTCA chassis
      • Switch card redundancy of 1:1 and 1+1
  • Tracewell Systems, Inc.  (4)
    • CO-Star ATCA Mesh
      Push-pull cooling for >250 W/slot, PPS shelf management, and full-mesh data rates to 10 Gbps (+)

      Features:

      32237.jpg
      • Heavy duty 14-slot, 13U AdvancedTCA system provides rugged reliability
      • Advanced push-pull cooling can support up to 300 W per slot, including 30 W per transition slot
      • Low noise
    • 14-slot T Frame for AdvancedTCA
      A development system for AdvancedTCA switch fabric boards and systems (+)

      Features:

      17077.jpg
      • 14-slot capacity
      • Open-frame design provides access to both front and rear boards for probes and debugging
      • Mounted several inches above the benchtop for easier access
    • Horiz. 5-slot Full Mesh
      A low profile 5U system platform (+)

      Features:

      21479.jpg
      • Designed to meet NEBS Level III and UL/EN 60950, EN55024
      • Advanced high capacity push-pull cooling scheme
      • High performance shelf management
    • CO-Star AdvancedTCA Central Office Shelf
      A 14-slot Dual Star AdvancedTCA Central Office 14 slot AdvancedTCA system (+)

      Features:

      • Advanced push-pull cooling (200W/slot with redundancy)
      • Designed to meet or exceed 5-nines
      • Redundant shelf managers support RMCP and SNMP
  • Universal Air Filter Co.  (1)
    • Blade Server Filter
      Blade Server Air Filters are framed air filter assemblies ideal for use in server applications where space is limited (+)

      Features:

      34769.jpg
      • Flame retardant: Meets AdvancedTCA and UL 94 flame safety specs
      • Low pressure drop
      • Low restriction to airflow
  • UXComm  (1)
    • ATCA Solution 1.0 - ATCA Management Software
      Integration-ready software platform for AdvancedTCA system management (+)

      Features:

      21830.jpg
      • Discover - discover servers and AdvancedTCA Chassis Management Modules (CMM)
      • Monitor: customized displays for AdvancedTCA chassis inventory
      • Detect and Alert: send notification through SNMP and e-mail for thresholded events
  • Westek Technology  (1)
    • P1414ATCA
      14U AdvancedTCA compliant chassis with 14 expansion slots (+)

      Features:

      • Redundant –48V DC Powered
      • 14 card slot backplane
      • High performance hot swap cooling
03/24/23 02:53
Close

Subscribe to AdvancedTCA updates