AdvancedTCA

Showing results for: atca
Refine AdvancedTCA companies and products:
advancedtca 40 gbps advancedtca carrier blade advancedtca anniversary advancedtca specification picmg advancedtca 2011 advancedtca 40g xtca advancedtca architecture advancedtca 10 gbe advancedtca servers advancedtca blades long term evolution advancedtca all-ip advancedtca slots ipmi advancedtca advancedtca extensions advancedtca chassis advanced telecom computing architecture picmg advancedtca joe pavlat atca
Click on any vendor
to see a listing of
atca related products.
  • Radisys Corporation  (15 of 34)
    • Promentum ATCA-4550 & ATCA-4555
      10-gigabit compute processing module based on Intel Xeon 5600 processor (+)

      Features:

      44557.jpg
      • The ATCA-4550 series are the 8th generation single board computers from Radisys
      • They are high performance, single slot AdvancedTCA computer modules based on the single socket L5638 or E5645 Intel Xeon processor
      • They are ideal for control plane and server functions for LTE wireless infrastructure, Deep Packet Inspection, IPTV, IP multimedia subsystems and defense application
    • Radisys Promentum AdvancedTCA Family
      Promentum SYS-6000: platform with Carrier Grade Linux, shelf management/HPI libraries, and HA blade/switch management (+)

      Features:

      20427.jpg
      • Promentum ATCA-1000: Universal PMC Module, flexibility of PMCs in different configurations for multiple applications
      • Promentum ATCA-2100: Switch/Control Module, GbE, and Fibre Channel switch fabric for control, services, and management applications
      • Promentum ATCA-3000: Disk Storage Module, providing high-performance Fibre Channel storage
    • FlexTCA
      AdvancedTCA deep packet inspection (DPI) solution (+)

      Features:

      47693.jpg
      • Network intelligence solutions such as Policy Charging and Enforcement Functions (PCEF) can exceed 200 Gbps while wireless core and security applications can scale up to 320 Gbps
      • Delivers up to 4 times the processing density of previous generation AdvancedTCA offerings at a price per bit savings of up to 75 percent
      • Enables network equipment providers (NEPs) to quickly and cost-effectively produce the scalable DPI applications operators need to monitor and control their network traffic while ensuring quality of service and experience (QoS/QoE)
    • C2 Server
      The Radisys Promentum C2 server is based on an LCR Ruggedized 6U 6 Slot ATCA Chassis that is designed to meet MIL-STD-810. It has been validated with: Radisys Promentum ATCA-2210 switches; Radisys Promentum ATCA-4500 series of processor blades including the ATCA-4500, ATCA-4550, ATCA-4555 and ATCA-4580; Astute R1100 10G iSCSI Edge Storage blade and the E1112 RTM (+)

      Features:

      46025.jpg
      • In a typical configuration using two of each blade, the system provides ~500 SPECint_rate_base2006 and 7.2TB of storage capacity with dual redundant switches
      • RTM options for the A4500 series of product include 10x1GbE RTM, Fibre Channel RTM with on-board HDD, and the standard RTM with on-board storage
      • The Single Board Computers are certified with VMware ESXi, which allows multiple operating systems running on the compute blades, consolidation of multiple applications on a single blades, and the use of VSphere 4.0 to provide a fault tolerant environment [...]
    • Promentum ATCA-1000
      Four PCI Mezzanine Card (PMC) Sites with Front Panel Access (+)

      Features:

      19675.jpg
      • 2 PIM connections through optional RTM for sites 2 and 4
      • Onboard 8-port Gigabit Ethernet Switch (Broadcom BCM5682)
      • Internal 512KB packet buffer
    • FlexPacket ATCA-PP50 /FlexCompute ATCA-XE50 / FlexCore ATCA-FM40
      FlexPacket ATCA-PP50 (+)

      Features:

      36001.jpg
      • PP50 provides TEMs with deep packet inspection (DPI) capabilities to support advanced content-aware routing, traffic management, and security functions required by multi-service IP networks
      • The blade is engineered to meet the application needs of IPTV, 3G LTE aggregation gateways, and security platforms
      • Dual 1 GHz RMI XLR732 multicore MIPS64 packet processor
    • Promentum ATCA-4580
      10-gigabit compute processing module based on a dual Intel Xeon 5600 processor (+)

      Features:

      44558.jpg
      • The ATCA-4580 is one of the 8th generation single board computers from Radisys
      • It is a high performance, single slot AdvancedTCA computer module based on a dual socket L5638 Intel Xeon processor
      • It is ideal for server-centric applications, media processing applications, or LTE infrastructure
    • Radisys Promentum ATCA 4.0 Platform
      40 Gigabit AdvancedTCA Application Ready Platform (+)

      Features:

      44296.jpg
      • As TEMs focus on building next-generation network elements, they need a platform providing next-generation switching, power, and cooling, and supporting high-bandwidth applications such as LTE, WiMAX, femtocell gateways, and video
      • Satisfying these requirements, the Radisys ATCA 4.0 platform, based on the company's 4th generation of AdvancedTCA products, ensures a smooth and economical transition to the ATCA 4.0 environment
      • Radisys ATCA 4.0 products are highly scalable and dense, and offer a four times performance improvement in both switching and processing capabilities over 10G offerings
    • Promentum ATCA-1200
      ATCA Managed Quad-AMC Carrier Blade (+)

      Features:

      44284.jpg
      • Enables a user to build multiple AdvancedTCA modules with different AMC configurations – PrAMC, Security (IPSec/SSL), Storage, I/O AMC, etc.
      • Control plane consists of the MPC8548 PowerQuik III processor, the Local Management processor (LMP), the PCI-E links connecting each AMC to the LMP and a 1 GE control port from the LMP to the switch
      • The PCI-E links, which are routed to each AMC via a PCI-E switch, provides the means of supporting “un-intelligent” boards and allow an application running on the LMP to initialized the AMC device much like legacy PCI devices were initialized. PCI-E switch also supports bridging function to enable AMC to AMC PCI-E communication or control
    • Promentum ATCA-3000
      Single slot AdvancedTCA PICMG 3.0/3.1 compliant Fibre Channel disk storage module (+)

      Features:

      19738.jpg
      • Fully managed Fibre Channel storage module supporting module level hot swap
      • Single 3.5" disk drive site carrying 300 GB high performance, high reliability SCSI drive
      • Supports 1 Gbps or 2 Gbps Fibre Channel addressable through IPMI
    • ATCA 10GbE System
      AdvancedTCA 10 GbE traffic management and security system delivers very high performance deep packet inspection capabilities to allow TEMs to rapidly develop and deploy content-aware platforms (+)

      Features:

      33077.jpg
      • -Deep Packet Inspection for Content-Aware Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Deep Packet Inspection: Multi-core, multi-threaded MIPS64 processor -Integrated 10 Gbps security acceleration engine
    • PROMENTUM ATCA-9100
      AdvancedTCA media processing blade (+)

      Features:

      35150.jpg
      • Highest density of media processing through the use of latest multicore DSP silicon from Freescale
      • Single-slot PICMG 3.0/3.1 (Option 9) compliant
      • Hosts up to 20 quad-core Freescale MSC8144 DSPs on two mezzanine cards
    • FlexCore ATCA-FM40 10GbE Base/Fabric Switch
      Base/Fabric Switch AdvancedTCA blade (+)

      Features:

      35155.jpg
      • 10 GbE line-rate switching for 16 slots and 8 external links with 240 Gbps non-blocking fabric switch
      • Dedicated 533 MHz 440EPx PowerPC processor provides embedded switch
      • 16 slot 10 GbE (PICMG3.1 Option 9) Fabric Switch and 16-slot 10/100/1000BT Base Switch
    • ATCA-PP50 Packet Processing Blade
      AdvancedTCA blade supporting two multi-core RMI XLR732 packet processors (+)

      Features:

      33080.jpg
      • Delivers deep packet inspection and security capabilities for wireless aggregators, IPTV, IMS, and security
      • Two XLR732 processors, each with 8 multi-threaded MIPS cores
      • Up to 16 GB per blade, 8 GB per XLR
    • ATCA 40G Platforms
      Pre-integrated 40G ATCA Platforms. (+)

      Features:

      183838669505351182.jpg
      • Fixed & Mobile Broadband Networks
      • 3G & LTE Gateways including Internet Offload
      • DPI Policy Enforcement & Traffic Shaping
  • LeCroy Corporation  (1)
  • asis  (4)
    • 14 Slot AdvancedTCA 13U/ 14U AC/DC
      Asis 14-Slot AdvancedTCA AC/DC Shelf exceeds Telco market requirements for reliability and availability. Over ten years experience in the implementation of the ATCA standards and ever improving backplane design, thermal management and system engineering capabilities went into the design of the 14-Slot ATCA Shelf. Fully redundant system featuring four hot-swappable fan trays, dual hot-swappable shelf managers, up to five 1600W AC power supplies, or two DC Power Entry Modules (PEMs). (+)

      Features:

      205396672724747132.jpg
      • 19" rackmount
      • 300W Cooling Capacity per slot
      • AC/DC Power
    • 14 Slot AdvancedTCA DC14U/ AC15U
      Asis 14-Slot AdvancedTCA AC/DC Shelf exceeds Telco market requirements for reliability and availability. Over ten years experience in the implementation of the ATCA standards and ever improving backplane design, thermal management and system engineering capabilities went into the design of the 14-Slot ATCA Shelf.Fully redundant system featuring three hot-swappable fan trays, dual hot-swappable shelf managers, up to five 1600W AC power supplies, or two DC Power Entry Modules (PEMs). (+)

      Features:

      205399604724619585.jpg
      • 19" rackmount
      • 300W Cooling Capacity per slot
      • AC/DC Power
    • Asis 6 Slot AdvancedTCA AC/DC Chassis
      Asis 6-Slot AdvancedTCA AC/DC Shelf exceeds Telco market requirements for reliability and availability. Over ten years experience in the implementation of the ATCA standards and ever improving backplane design, thermal management and system engineering capabilities went into the design of the 6-Slot ATCA Shelf. We ensure consistent quality with our world class manufacturing at ISO9000 certified facilities. Fully redundant system featuring dual hot-swappable fan trays, dual hot-swappable shelf managers, three 1500W AC power supplies, or two DC Power Entry Modules (PEMs). (+)

      Features:

      205389374724226858.jpg
      • 19" rackmount
      • PICMG 3.0 R2.0, and IPMI v 1.5 compliant shelf.
      • 300W per slot using push-pull cooling
    • Asis 2 slot AdvancedTCA AC/DC shelf
      The Asis 2 slot ATCA chassis is the most advanced chassis available in the market with both AC and DC configuratiosn for maximum flexibility, 300W per slot, One powerful fan tray, containing four high performance fans and a 40 Gbps baclplane speed among its many other features. The Chassis is CE, UL, TUV certified and is Designed to meet FCC and CISPR requirements. (+)

      Features:

      205388128724493676.jpg
      • 40 Gbps backplane speed
      • Fabric interface with full mesh or 15X replicated mesh interconnect.
      • 300W per slot
  • NEI  (3)
    • A-5000 ATCA System
      A standards-based high-reliability server featuring superior performance, advanced I/O capacity, and easy manageability (+)

      Features:

      34755.jpg
      • 5-slot AdvancedTCA system with full-mesh topology for 3.125 Gbps throughout
      • Three node slots available for AdvancedTCA single board computers, or other AdvancedTCA blades
      • Dual 16-port ZNYX PICMG 3.0 GbE base fabric switches and dual Intel Shelf Managers
    • A-13000 ATCA System
      NEI's A-5000 and A-13000 carrier-grade AdvancedTCA platforms offer customers a standardized architecture for next-generation communications applications (+)

      Features:

      34760.jpg
      • These products have passed rigorous testing required by today's telecommunication organizations
      • NEI AdvancedTCA systems offer scalability and greater than 5-nines (99.999%) availability
      • With standardized packet-switched backplane topologies, node-based switching for board communications and centralized management with IPMI, the NEI A-Series family is the right architecture for carrier-grade next-generation communication applications
    • MMP for ATCA
      Dialogic Multimedia Platform for AdvancedTCA (+)

      Features:

      33776.jpg
      • Supports multimedia processing and includes voice, conferencing
      • Supports 250 to 500 universal ports with audio transcoding
      • Supports a variety of low-bit-rate and wireless coders
  • Pixus Technologies  (7)
    • ATCA® Shelves and Backplanes
      AdvancedTCA® shelves from Pixus are equipped with the hot-swap high-performance RiCool III fans. These fans offer added output coupled with a reduced noise level. Pixus 40GBASE-40KR4 backplanes are monolithic with a high level of signal integrity in dual star, full mesh, or replicated mesh. (+)

      Features:

      304838884861878701.jpg
      • PXS1340 13U ATCA Shelf
      • PXS0640 SlotSaver 6U ATCA Shelf
      • PXS0309 3U ATCA Hybrid Chassis with 8 AMCs [...]
    • Next Generation AdvancedTCA Chassis
      The Pixus next generation AdvancedTCA feature advances in cooling, backplane performance, and PEM design.  Our 13U and 15U ATCA system platforms utilize patented RiCool reverse impellar blowers for up to 400W/slot of cooling with meeting NEBS requirements and CPTA guidelines. Our 40GbE backplanes are creatively designed to keep costs at a minimum.  Contact us about 100G backplane options.  The new generation intelligent Power Entry Modules (PEMs) feature higher power options and compliance to PICMG 3.7.  With the industry's "most successful ATCA chassis design" with over 15000 global installs, choose Pixus for your AdvancedTCA system application. (+)

      Features:

      333872124883530886.jpg
      • 6U, 13U, 15U Chassis heights with next-gen upgrades
      • Superior 40GbE backplane performance while keeping costs low
      • Patented RiCool Rittal blowers for unprecedented cooling performance
    • 6U ATCA SlotSaver - 40G
      Pixus Technologies, a supplier of backplane, enclosure, and embedded component solutions, has introduced a new 6U AdvancedTCA (ATCA) SlotSaver Shelf that gains 2 slots of payload card usage, along with AC power. The density, full redundancy, and versatile power configuration is well suited for telecom, military/aerospace, and high-end networking/computing applications. (+)

      Features:

      200691083411648479.jpg
      • Combined switch/shelf manager saves 2 node slots
      • 50% more computing density
      • Simultaneous AC/DC power
    • PXS1340
      The PXS1340 is a 13U, 14-Slot ATCA Shelf. It supports a 40GBASE-KR4 backplane in dual-star, full mesh, or replicated mesh configurations. All of the Field Replaceable Units (FRUs) provide full redundancy with quad Cooling Units (CUs), dual Power Entry Modules (PEMs), dual Shelf Manager Controllers (ShMCs), and dual Hubs. It supports front-to-rear cooling. Both DC and AC power options are available. Over 15,000 of the 10GBASE-KR version of the shelf have been deployed world-wide. (+)

      Features:

      300077358275634038.jpg
      • 40G or 10G Dual Star 14-Slot Backplane
      • 13U tall x 19â€? wide x 15â€? deep
      • Superior front-to-rear cooling configuration for airflow with empty Slots per NEBS
    • PXS0640
      The PXS0640 is a 6-slot, 6U ATCA Shelf supporting a 40GBASE-KR4 backplane for 40GbE performance. The Ethernet switches have been integrated with the Shelf Managers to free up the two hub slots, thereby providing all 6 slots as node slots. (+)

      Features:

      298279875275468309.jpg
      • 40GBASE-KR4 Backplane for 40GbE performance
      • All 6 slots are payload slots, no hub slots required
      • Integrated Ethernet Switches and Shelf Managers
    • MicroTCA® Systems
      Pixus Technologies’ MicroTCA® chassis and systems are based on the PICMG® MicroTCA.0 R1.0 specification. The 1U and 3U platforms support up to 8 AMC modules to provide a superior level of flexibility and compute density. (+)

      Features:

      304839286861837633.jpg
      • PXS1PXS0108 1U MicroTCA® Chassis
      • PXS0309 3U ATCA® Hybrid Chassis with 8 AMCs [...]
    • Enclosure Platforms for AdvancedTCA, MicroTCA & CompactPCI
      The Pixus/Rittal team have develop many of the first and most commercially successful AdvancedTCA and CompactPCI systems in the industry.  With a modular design approach, Pixus offers a wealth of enclosure configuration options for the most challenging design requirements.  The company also provides a wide range of MicroTCA enclosure solutions, specializing in customized platforms. (+)

      Features:

      • Superior cooling solutions with unique RiCool reverse impeller blowers
      • Ruggedized and customized versions available
      • Backplane experts with 40G standard products and 100G in design
  • Schroff Pentair  (15 of 26)
    • AdvancedTCA chassis 14 slot
      Available with Full Mesh or Dual Star topology (+)

      Features:

      • 14 slot backplane
      • Proven design
      • Redundant 48VDC power input
    • 450/40 and 300/40 Series ATCA Systems
      450/40 and 300/40 ATCA chassis are designed to support the next generation of ATCA board requirements, minimizing the time to market for critical, high-availability applications where high performance is crucial. (+)

      Features:

      312702222861782154.jpg
      • 2, 6 and 14 slot backplanes
      • 40 GBps (100GBASE-KR) transmission rate
      • Up to 450 watts/slot cooling
    • ATCA 14 Slot Full Mesh Backplane 23005-303
      A PICMG 3.0 compliant 14-slot AdvancedTCA backplane (+)

      Features:

      • Full Mesh topology (Base Interface centered)
      • Supports four ports per channel
      • Update ports supported
    • 450/40 ATCA Family
      Schroff® 450/40, AdvancedTCA family of systems, are designed to support today’s more powerful multi-core processors. (+)

      Features:

      220553287961351930.jpg
      • 19" chassis come in 2, 6, and 14-slot varieties
      • 40GBASE-KR4 (40G) capable backplanes
      • Available for both AC and DC applications
    • 23098-147
      Available with Full Mesh or Dual Star topology (+)

      Features:

      • 14 slot backplane
      • Proven design
      • Redundant 48VDC power input
    • Express Programs
      Conform to PICMG specifications (+)

      Features:

      312702470861240973.jpg
      • ATCA, uTCA, CompactPCI standards
      • Standard and customized solutions available
      • Local and global design and product support
    • 14-Slot ATCA System
      A third-generation, 14-slot AdvancedTCA system (+)

      Features:

      • Suitable for telecom and networking applications including wireless IP, telephony, and optical switches
      • System backplane available in full mesh, dual star, and dual dual star topologies
      • Designed to meet all NEBS requirements
    • 23098163
      12U 14 Slot 19” or 12SU 16 Slot ETSI Configurations (+)

      Features:

      • Dual Star or Full Mesh Topologies
      • New slim profile dual Schroff integrated shelf manager/controllers (ACB III) – mounted next to AdvancedTCA card cage; based on Pigeon Point Shmm 300
      • Redundant 48 VDC Power Inputs via hot swappable PEMs with monitoring
    • 23098170
      12U 14 Slot 19” or 12SU 16 Slot ETSI Configurations (+)

      Features:

      • Dual Star or Full Mesh Topologies
      • New slim profile dual Schroff integrated shelf manager/controllers (ACB III) – mounted next to ATCA card cage; based on Pigeon Point Shmm 300
      • Redundant 48VDC Power Inputs via hot swappable PEMs with monitoring
    • 11592044
      12U 14 Slot 19” or 12SU 16 Slot ETSI Configurations (+)

      Features:

      • Dual Star or Full Mesh Topologies
      • New slim profile dual Schroff integrated shelf manager/controllers (ACB III) – mounted next to ATCA card cage; based on Pigeon Point Shmm 300
      • Redundant 48VDC Power Inputs via hot swappable PEMs with monitoring
    • 11592043
      12U 14 Slot 19” or 12SU 16 Slot ETSI Configurations (+)

      Features:

      • Dual Star or Full Mesh Topologies
      • New slim profile dual Schroff integrated shelf manager/controllers (ACB III) – mounted next to ATCA card cage; based on Pigeon Point Shmm 300
      • Redundant 48VDC Power Inputs via hot swappable PEMs with monitoring
    • 11592042
      12U 14 Slot 19” or 12SU 16 Slot ETSI Configurations (+)

      Features:

      • Dual Star or Full Mesh Topologies
      • New slim profile dual Schroff integrated shelf manager/controllers (ACB III) – mounted next to ATCA card cage; based on Pigeon Point Shmm 300
      • Redundant 48VDC Power Inputs via hot swappable PEMs with monitoring
    • AdvancedTCA Handle
      A hot-swap handle for AdvancedTCA boards that addresses the requirements of the PICMG 3.0 specification (+)

      Features:

      18039.jpg
      • Engonomically designed with an intuitive open/close mechanism that separates the switch actuation of the hot-swap microswitch from the inject/eject process, permitting the board to shut down electronically before the ejection process begins
      • Usable for injection/extraction of boards at forces higher than 200 N
      • Locks in the open position to prevent accidental board insertion into the slot
    • BPL001091
      2, 5 and 14 Slot Standard (+)

      Features:

      • Dual Star, Dual Dual Star and Full Mesh Topologies
      • Conforming to AdvancedTCA specification version 1.0 [...]
    • BPL000479
      2, 5 and 14 Slot Standard (+)

      Features:

      • Dual Star, Dual Dual Star and Full Mesh Topologies
      • Conforming to AdvancedTCA specification version 1.0 [...]
  • ZNYX Networks  (8)
    • ZX7300
      The ZX7300 is a PICMG 3.1 payload Ethernet switch with four 10 Gigabit 24 Gigabit Ethernet ports (+)

      Features:

      • Two of the 10 Gigabit ports are connected to the ATCA fabric, so the ZX7300 can implement a fully redundant break-out network from within the ATCA chassis
      • Egress ports are RJ45 for Gigabit Ethernet and SFP+ for 10 Gigabit Ethernet
      • The hub switches can be any PICMG 3.1 Option 1 or 9 devices such as the ZNYX ZX7250
    • ZX6000/7000 PICMG 3.0 / 3.1 ATCA Hub Board
      24-port (ZX6000) or 48-port (ZX7000) Gigabit Ethernet nonblocking switch fabric (upgradable) (+)

      Features:

      20403.jpg
      • 16-slot chassis support for base interface
      • PICMG 3.1 Option 1 & 2 support
      • Four (ZX6000) or two (ZX7000) PTMC Option 5 slots
    • ZX9210
      ZX9210 is a ATCA CPU Blade with Dual the highest performance Intel® Xeon® E5-2600 Series processors supporting 16 Memory Slots with 256 GB Capacity and Dual 10 GbE Fabric Interface (+)

      Features:

      224470746861513895.jpg
      • Dual Intel® Xeon® E5-2600 Series processors
      • 16 Memory Socket for up to 256 GB DDR3 1600 MHZ Memory
      • Dual 10 GbE Fabric Interface
    • ZX7250
      The OpenArchitect ZX7250 is an ATCA 3.1 switch that achieves the full potential of the 10 Gigabit Backplane market (+)

      Features:

      45163.jpg
      • With twenty 10 Gigabit Fabric ports, the ZX7250 can support a full 14-slot Chassis of Option 9 / Option 1 payload boards while hosting 9 10-Gigabit Ethernet ports (with RTM) for chassis egress
      • The Base Interface is served by a separate switch with 24 Gigabit Ethernet ports and an additional two 10-Gigabit Ethernet ports
      • The 10-Gigabit backplane market is developing very rapidly and requires a precise balance between features and cost
    • ZX1900
      The ZX1900 is a unique platform for packet processing and switching (+)

      Features:

      • The standard configuration includes a 5U chassis, 10-Gigabit Ethernet switch plus three closely coupled payload slots for user applications
      • Using the ZNYX Front-Transition-Module architecture, the ZX1900 makes more egress ports available than any other 5U ATCA solution
      • This means that in addition to hosting a network application in its payload slots, the ZX1900 can serve as the network infrastructure, eliminating the requirement for an external switch and providing significant cost savings
    • zx7000
      Modular AdvancedTCA switching platform with base and fabric support (+)

      Features:

      34834.jpg
      • 48-port non-blocking GbE switch fabric with up to 12 GbE egress ports (RJ-45)
      • Configurable to support chassis with pre-ECN (single ShMC) or post-ECN (ShMC cross-connect)
      • Two PMC/PTMC type-5 sites for additional egress ports
    • zx6150
      AdvancedTCA Base Ethernet switching platform with massive egress capacity (+)

      Features:

      34833.jpg
      • 50-port base interface switch complex
      • 1 front panel 10 GbE port (XFP), 9 front panel 1 GbE ports (SFP+), 5 front panel 10/100/1000BT ports (RJ-45)
      • 18 GbE ports to zx6150 RTM (SFP+)
    • zx7200
      AdvancedTCA 10 Gigabit Ethernet switching platform with 70 Gigabit egress capacity (+)

      Features:

      34832.jpg
      • 20-port 10 GbE Fabric Switch with 5 SFP+ ports for 10 GbE to front panel or RTM, and 10 GbE inter-switch link
      • Hardware-accelerated IPv4 switch/routing at Layer 3+ with Content Aware Processor (CAP) for packet vectoring with OpenArchitect/PV
      • Linux-based OpenArchitect Operating Environment and Control Software for configuration, management, and total system high-availability
  • UXComm  (1)
    • ATCA Solution 1.0 - ATCA Management Software
      Integration-ready software platform for AdvancedTCA system management (+)

      Features:

      21830.jpg
      • Discover - discover servers and AdvancedTCA Chassis Management Modules (CMM)
      • Monitor: customized displays for AdvancedTCA chassis inventory
      • Detect and Alert: send notification through SNMP and e-mail for thresholded events
  • SOUTHCO  (10)
    • ADVANCED-TCA Faceplate Mounting Hardware
      Ejector handles (+)

      Features:

      21498.jpg
      • Safety ground pins
      • ATCA-compliant captive retention screws
      • Meet all requirements of the AdvancedTCA PICMG 3.0 R2.0 standards for faceplate mounting and fastening
    • 77-0-40552 ATCA Safety Ground Pins
      Stainless steel guide pin for AdvancedTCA applications (+)

      Features:

      • Bulleted tip
      • Smooth finish
      • Additional lengths possible [...]
    • 47 ATCA Captive Retention Screws
      Patented captive retention screws for AdvancedTCa front board faceplates (+)

      Features:

      • #2 Phillips Drive Head
      • M3 Thread
      • Additional screw lengths available [...]
    • 4C ATCA Captive Retention Screws
      Patented captive retention screws for AdvancedTCA front board faceplates (+)

      Features:

      • #2 Phillips Drive Head
      • M3 Thread
      • Custom colors available
    • P7 - ATCA Compliant Faceplate Mounting Hardware
      Here is a fully compliant single-source solution that makes it easy to meet the Advanced TCA PICMG 3.0 R2.0 specifications for faceplate mounting in telecom computer-rack-system installations. As a bonus, bundled pricing is available for users who purchase the complete solution. (+)

      Features:

      293460955861869783.jpg
      • Ergonomic inject/eject lever designed for easy operation has aesthetically pleasing design that takes up minimal real estate on the faceplate
      • Secondary catch on inject/eject lever operates microswitch to permit hot-swapping
      • Hardened captive screws with #2 Phillips headstyle also feature knurled knobs for easy hand assembly
    • P7-A-503-11 ATCA Ejector Handle
      Features secondary catch (+)

      Features:

      • Takes up minimal real estate on face plate
      • Used for faceplates with thickness 0.8 mm to 1.5 mm
      • Used with lever microswitch [...]
    • P7-A-533-11 ATCA Ejector Handle
      Patented ejector handle with easy push to close feature and seconday catch (+)

      Features:

      • Takes up minimal real estate on faceplate
      • For use with 1.0 mm faceplate
      • For use with plunger-style microswitch [...]
    • P7-A-523-11 ATCA Ejector Handle
      Patented ejector handle with easy push to close feature and seconday catch (+)

      Features:

      • Takes up minimal real estate on faceplate
      • For use with 2.5 mm faceplate
      • For use in PMC applications
    • P7-A-543-11 ATCA Ejector Handle
      Patented ejector handle with easy push to close feature and seconday catch (+)

      Features:

      • Takes up minimal real estate on faceplate
      • For use with 2.5 mm faceplate
      • For use with PMC applications
    • P7-A-513-11 ATCA Ejector Handle
      Patented ejector handle with easy push to close feature and seconday catch (+)

      Features:

      • Takes up minimal real estate on faceplate
      • For use with faceplates ranging in thickness from 0.8 mm to 1.5 mm
      • Universal handle for PMC and non-PMC applications
  • Comtel Electronics GmbH  (15 of 23)
    • ATCA CO14N
      Nine-inch rack-mount 13U system (+)

      Features:

      43782.jpg
      • 4-slot 8U front boards and RTM
      • Full Mesh and Dual Star topologies available
      • 4 slot high performance Backplane, 10 Gbps
    • CO-Pizza 5-Slot Triple Mesh ATCA Shelf
      5 slots electrically and mechanically compliant to the PICMG 3.0 AdvancedTCA specification (+)

      Features:

      18689.jpg
      • Front boards and Rear Transition Module (RTM) assemblies accommodated
      • Rack and Shelf are designed to meet EMC standards
      • Afull function Shelf Management providing FRU Control and Shelf Management Controller (ShMC) functions for the shelf FRU's and for compliant user Board Assemblies
    • ATCA CO2-3U AC/DC
      19" rack-mount 3U, AC/DC Economy Version (+)

      Features:

      43783.jpg
      • 2 slot replicated full mesh backplane
      • Redundant controller / ShMC in two versions
      • Redundant PEM or Quad 850 W AC Power Supply
    • ATCA CO6-8U Front to Rear cooling
      9" Rack-mounted 7U system – DC Version (+)

      Features:

      43784.jpg
      • 6 slot replicated full mesh backplane
      • NEW – Front to Rear cooling five fans of 80 mm x 80 mm
      • Redundant Controller/ShMC in two versions
    • CO-Pizza 2-Slot Replicated Mesh ATCA Shelf
      2 slots electrically and mechanically compliant to the PICMG 3.0 AdvancedTCA specification (+)

      Features:

      22343.jpg
      • Front boards and Rear Transition Module (RTM) assemblies accommodated
      • Rack and shelf are designed to meet EMC standards
      • A full function Shelf Management providing FRU Control and Shelf Management Controller (ShMC) functions for the shelf FRUs and for compliant user board assemblies
    • CO-Pizza 8-Slot Replicated Mesh ATCA Pizza Box
      8 slots electrically and mechanically compliant to the PICMG 3.0 AdvancedTCA TM specification (+)

      Features:

      18690.jpg
      • Front boards and Rear Transition Module (RTM) assemblies accommodated
      • Rack and Shelf are designed to meet EMC standards
      • Afull function Shelf Management providing FRU Control and Shelf Management Controller (ShMC) functions for the shelf FRU's and for compliant user Board Assemblies
    • ATCA CO2 - 2 Slot 2U
      AdvancedTCA 2U, 2 slot horizontal Central Office Shelf 19" rack mounted or desktop 2U system with redundant PPS ShMC M500, redundant PEM and redundant cooling (+)

      Features:

      34095.jpg
      • 19" two slot horizontal front boards and RTM
      • Redundant PPS ShMC M500
      • Redundant EMC filtered power feeds
    • ATCA CO6 - 6 Slot 5U
      AdvancedTCA 5U, 6-slot Horizontal Central Office Shelf 19" rack mounted or desktop 5U system with redundant PPS ShMC M500, redundant PEM and redundant cooling (+)

      Features:

      34096.jpg
      • 19" 6 slot horizontal front boards and RTM
      • Redundant PPS ShMC M500
      • Redundant EMC filtered power feeds
    • CO14-G4
      The new flagship 14-slot chassis is Comtel’s “4th Generation” and the latest in high performance platforms for ATCA! Appropriately named, CO14-G4, this Chassis is a 14U height 14 slot AdvancedTCA® chassis supports full mesh, dual star and dual-dual star topologies backplanes it is DC powered and has front-to-back cooling (+)

      Features:

      293955169861218271.jpg
      • 450W or 600W per slot Cooling Options
      • Ultra high performance Air-/-Plane backplane supporting
      • 40 Gbps and now 100 Gbps "ready'!
    • ATCA CO5 - 5 Slot 5U
      AdvancedTCA 5U, 5 slot Horizontal Central Office Shelf (+)

      Features:

      34098.jpg
      • 19" rack mounted or desktop 5U system with redundant PPS M500 Or Motorola M100 ShMC, redundant PEM and redundant cooling
      • 19" 5 slot horizontal Main and RTM
      • 5 slot 10 Gbps Backplane, with replicated full mesh fabric connections
    • ATCA CO14 - 14 Slot 13U
      AdvancedTCA 13U, 14 slot Central Office Shelf 19" rackmount 13U system, dual star and full mesh backplanes topologies (+)

      Features:

      34099.jpg
      • Designed for compliance to NEBS and EN levels
      • 19" 14 slot main and RTM
      • 14 slot 10 Gbps backplane, with dual star topologies fabric connections
    • ATCA CO16 - 16 Slot 13U ETSI
      AdvancedTCA 13U, 16-slot Central Office shelf, ETSI System dual star and full mesh backplanes topologies (+)

      Features:

      34100.jpg
      • Designed for compliance to NEBS and EN levels
      • 19" 16-slot front boards and RTM
      • ETSI 13U (574 mm) system
    • Air-/Plane Backplane Technology
      The ATCA Air-/-Plane technology enables ATCA developers to increase blade power dissipation in telecom, Network, and Cloud systems and reaches new heights with 100 Gbps! (+)

      Features:

      294045651861503851.jpg
      • Extremly low Insertion Loss Deviation (ILD)
      • Unprecedentedly matched impedance throughout the entire signal path
      • Very quiet to satisfy NEBS acoustic noise requirement at normal operating conditions
    • Intelligent 300 W Thermal Load Board
      If you are qualifying high-power blades and you are not sure how airflow test reports apply to you, we have the answers (+)

      Features:

      44436.jpg
      • AdvancedTCA blades are drawing more power and getting denser
      • Comtel Electronics is now offering a way to test the most important characteristic of your AdvancedTCA chassis – temperature
      • Comtel's load board is controlled via any AdvancedTCA compliant shelf manager using standard IPMI commands
    • CO1
      Comtel's new ATCA CO1 1U 1Slot DC Power Chassie (+)

      Features:

      293956036861435562.jpg
      • Pressurized cooling to accommodate 300W or 400W per slot cooling options
      • 48V DC input (Optional Dual redundant input available)
      • 19â€?, 1U Rackmount system
  • Extreme Engineering Solutions (X-ES)  (4)
    • XCalibur1412
      The XCalibur1412 with SecureCOTS™ technology provides an industry-leading combination of security and performance. It features dual Intel® Xeon® E5-2600 v4 family processors (formerly Broadwell-EP) with a tightly coupled Xilinx Kintex® UltraScale™ security FPGA and two up to 56 Gb/s InfiniBand or 40/56 Gigabit Ethernet ports. It is designed and manufactured in the USA, using COTS components from trusted domestic supply chains. It integrates ruggedization features that enable it to perform in environmentally challenging applications without modifications or enhancements. (+)

      Features:

      3745739690225629537.jpg
      • Supports dual Intel® Xeon® E5-2600 v4 family of processors (formerly Broadwell-EP)
      • PICMG 3.0 AdvancedTCA (ATCA) processing blade
      • Integrated Xilinx Kintex® UltraScaleâ„¢ security FPGA (XCKU060 or XCKU095)
    • XCalibur1411
      Multiprocessor AdvancedTCA card with nine P.A. Semi Dual-Core PWRficient PA6T-1682 Processors (+)

      Features:

      36840.jpg
      • Eight P.A. Semi PWRficient PA6T-1682 general-purpose processing nodes
      • One P.A. Semi PWRficient PA6T-1682 I/O and utility processor node
      • AdvancedTCA base support, AdvancedTCA 10 Gbps XAUI fabric support
    • XPedite6244
      Freescale MPC7448 PowerPC Processor AMC module with Gigabit Ethernet, USB, and SATA support for µTCA/AdvancedTCA systems (+)

      Features:

      36846.jpg
      • Freescale MPC7448 PowerPC Processor running at up to 1.7 GHz
      • Complies to AMC.0 and MicroTCA.0 (µTCA)
      • Supports up to 1 GB of 400 MHz DDR SDRAM
    • XPedite7040
      Intel Core Duo or Intel Core2 Duo Processor-Based AMC Module with GbE, USB, and SATA Support (for AdvancedTCA and MicroTCA systems) (+)

      Features:

      • Intel 3100 chipset
      • Front-panel Gigabit Ethernet
      • Front-panel RS-232 serial
  • AppliedMicro  (5)
    • PRS C192X Cell Switch Fabric Interface
      Fabric interface mezzanine for AdvancedTCA I/O blades such as AMCC's “nP3710 ATCA” blade and RadiSys' “Promentum ATCA-7010” blade (+)

      Features:

      • Features the AMCC's PRS C192X fabric interface, a queue manager device of AMCC's PRS switch fabric family, the shared-memory cell switches that provide best-in-class features for carrier-grade switching applications
      • In star topology implementations, operates in conjunction with an AdvancedTCA Cell Switch blade like AMCC's PRS40G-ATCA and supports from 2.5 Gbps (overspeed factor of 2) to 4 Gbps (Ethernet) of user bandwidth
      • In mesh topology implementations, up to 8 AdvancedTCA I/O blades equipped with the PRS C192X FIC mezzanine can interoperate without any centralized fabric switch: one or two blades can support up to 10 Gbps of user bandwidth, the other blades operating at 2.5 Gbps (overspeed factor =2)
    • PRS40G-ATCA Cell Switch
      AdvancedTCA switch blade featuring AMCC's PRS 80G Switch Fabric device, a carrier grade shared-memory cell switch that provides best-in-class features (+)

      Features:

      23896.jpg
      • Compliant with PICMG 3.0 AdvancedTCA standard and PICMG 3.6 Cell Switching (draft) specification, an AdvancedTCA fabric interface for carrier grade applications
      • Offers 40 Gbps of user bandwidth with an overspeed factor of 2 and provides full switch blade redundancy with load balancing and cell lossless maintenance switchover
      • Supports 12 payload slots, each supporting between 2.5Gbps (overspeed factor of 2) and 4 Gbps (Ethernet) of user bandwidth
    • AMCC PRS80G-ATCA
      Switch blade supports 8 x 10 Gbps full-duplex slots with QoS enforcement at media speed (+)

      Features:

      32163.jpg
      • Suitable for the convergence of voice, video, and data traffic, thanks to efficient QoS, bounded transit delay, and guaranteed precedence of time sensitive traffic over other traffic types
      • QoS enforcement at media speed supported by end-to-end, in-band flow control mechanisms through the switch fabric
      • Real-time traffic support, for example TDM
    • PRS80G-ATCA
      Evaluation switch for AdvancedTCA compliant systems (+)

      Features:

      • It is based on AMCC's PRS 80G Switch Fabric device, a member of AMCC's familly of carrier grade shared-memory cell switches
      • The switch blade offers up to 80Gbps of user bandwidth: 8 slots at 10Gbps in a full meshed (or dual-dual star) backplane, or 8 slots at 5Gbps in a dual-star backplane
      • The PRS switch fabric is a perfect fit for the convergence of voice, video and data traffic as it efficiently fulfills the associated key system requirements: QoS, bounded transit delay, and guaranteed precedence of time sensitive traffic over email or file transfer traffic
    • nP3710 ATCA
      Evaluation blade based on the AMCC MISSION solution, which combines state-of-the-art framer, HDLC, and nP3710 integrated network processor and traffic manager with a complete suite of modular internetworking software (+)

      Features:

      • The blade offers four Gigabit Ethernet client ports as well as two OC-3/OC-12 client ports with protection
      • Both packet and cell based traffic are supported with production worthy application software
      • The client ports reside on a PMC daughter card where all framing and HDLC encapsulation/de-encapsulation are performed
  • Telco Systems  (2)
    • T-HUB4
      40G ATCA switch blade to enable next generation mobile applications such as LTE and 4G as well as metro Ethernet, security, and military applications that require high performance and high availability (+)

      Features:

      • Telco Systems' T-HUB4 delivers simultaneous 10G and 40G connectivity to support AdvancedTCA service modules
      • T-HUB4 delivers an extensive networking software suite, BiNOX to provide state of the art connectivity, including switching, IPv4/IPv6 routing, MPLS, QoS, protection and redundancy, and clock synchronization to the ATCA platform
      • BiNOX is Telco Systems' field-proven, carrier grade networking operating system offering superior control and security while delivering wire speed Layer 2-4 networking
    • T-HUB Series
      T-HUB2 and T-HUB4 Blades Enable Dynamic Real Time Scheduling for 10G and 40G applications (+)

      Features:

      • Integrated load balancing features supporting wire speed 10G to 40G performance with dynamic resource allocation capabilities
      • Statistical and dynamic schedulers
      • Ideal for ATCA based wireless LTE packet gateways, security, cloud appliances, policy access control, IPTV, IMS and deep packet inspection devices requiring high performance switching and load balancing
  • Prodrive Technologies  (2)
    • Prodrive ATCA-IX5 and AMC-IX5
      Prodrive Technologies' Intel-based building blocks for MicroTCA and AdvancedTCA combine industry's leading compute architecture with the reliability, availability and serviceability (RAS) offered by xTCA form factors. The fifth generation Xeon parts offer unprecedented x86 compute performance per watt for use in scalable embedded applications in medical, industrial, telecom and data center applications.The AMC-IX5 offers up to 8 Intel Xeon cores at up to 2.0GHz, up to 16 Gigabyte of DDR4 and a wide range of connectivity options. Both 10 Gigabit Ethernet and Serial RapidIO at 20 Gigabit per second are supported for networking, in addition to PCI Express 3.0 for peripheral interfacing.The ATCA-IX5 houses one or two Intel Xeon-EP processors, linked together via Intel's Quick Path Interconnect. Prodrive's Embedded Connectivity Bridge (ECB) complements the raw processing power with flexible, high speed IO. Up to 40 gigabit Ethernet (40GbE) and 50 gigabit Serial RapidIO (SRIO) are supported to enable a broad range of applications, ranging from server applications in a virtualized environment to hard real-time and deterministic embedded applications.This blade is the ideal choice for high-end applications in many demanding markets.An open source bootloader and Linux are used for maximum logistic and application flexibility. Secure remote management is provided through IPMI-over-LAN. (+)

      Features:

      332852046481421501.jpg
      • ATCA-IX5: Intel Xeon E5-2600v4, up to 18 cores, up to 2.4GHz
      • AMC-IX5: Intel Xeon-D1500, up to 8 cores, up to 2.0GHz
      • On board Serial RapidIO at up to 50Gbps
    • Prodrive ATCA carrier & switch blades
      Prodrive Technologies' RapidIO Gen.2 carrier (PRIOC-G2), RapidIO Gen.2 switch (PRIOSB-G2) and 10/40G Ethernet (PESB) offer flexible switching solutions in the AdvancedTCA form factor. Regardless of the networking requirements, Prodrive has the right switching solution available.Mainstream 10 and 40 Gigabit Ethernet allows integration of mainstream server blades, and linking them together in a non-blocking topology. The Ethernet blade supports open networking software to maximize value and minimize time to market.Low latency Serial RapidIO switching supports hard real-time system use cases at 100ns latency per switch, while offering 20 Gigabit per second per port in a non-blocking architecture. Two up to fourteen channels towards the backplane allow for maximum scalability within any AdvancedTCA chassis type. On the front panel, up to four 80W full-size AMC sites are supported. In addition, AMC sites can be exchanged for front connectivity using small form-factor pluggable (SFP+) or quad small form-factor pluggable (QSFP) connectors, supporting up to two meters of passive copper cabling. All blades support a Gigabit Ethernet management network as well as an IPMI utility network, to control and manage the switches out-of-band.This hardware portfolio is complemented with Prodrive's powerful, award-winning network visualization software enables customers to quickly identify hot spots in network utilization and latency, reducing customer's time-to-market. (+)

      Features:

      332725022663399807.jpg
      • Up to four 80W full-size AMC sites
      • Up to 2x QSFP, 8x SFP+ front panel connector
      • RapidIO: Serial RapidIO 2.1, up to 20Gbps per port
  • Mercury Systems  (12)
    • Ensemble 8000
      Next-generation secure AdvancedTCA (ATCA) (+)

      Features:

      306584916861905388.jpg
      • ATCA commercial technology combined with dense OpenVPX processing and systems integrity technolgies
      • Next step in evolving Modular Open System Architectures (MOSAs) to meet massice secure processing requirements in the growing tactical cloud processing marketplace
      • ATCA Ensemble building blocks leverage OpenVPX processing densities and Mercury Systems' advanced, fourth generation server-class thermal management technologies [...]
    • Enseble HCD2100
      The Ensemble™ 2000 Series HCD2100 Octal-Core P4080 AMC Module combines multicore processing power and flexible I/O for AdvancedTCA® (ATCA) and MicroTCA® platforms. (+)

      Features:

      183131821184183131.jpg
      • Eight-core P4080 processor, with separate 32-KB I-cache/D-cache and a unified 128-KB L2 cache for each core
      • Shared MB L3 cache, security acceleration engine, dual Frame Managers that act like an NPU, 16 high-speed SerDes for serial RapidIO/PCIe/10GE, and other peripherals
      • Supports 4, 8, or 16 GB of DDR3 SDRAM memory, 256 MB of NAND flash, and 32 MB of NOR flash as part of the Device Compute Block
    • TBA-100: ATCA Quad PMC Carrier Card
      Single Pentium M 760 at 2 GHz and 533 MHz FSB (+)

      Features:

      23652.jpg
      • Up to 2 GB of DDR2 PC2100 SDRAM with ECC
      • E7520 Memory Controller with PCI Express
      • 6300ESB I/O controller hub
    • TSA-200: Dual PPC 970FX ATCA SBC
      Dual IBM 970FX RISC Processors at speeds up to 2.4 GHz (+)

      Features:

      • Up to 8 GB of 400 MHz DDR SDRAM with ECC
      • IBM CPC925 Bridge with 16-bit 600 MHz HyperTransport Cave
      • NVidia nForce Professional 2200 Southbridge
    • Ensemble
      Serial RapidIO AdvancedTCA application development system (+)

      Features:

      17666.jpg
      • Supports up to five mesh-enabled carrier boards in an AdvancedTCA chassis communicating over an off-the-shelf passive backplane
      • Direct 4X serial RapidIO path to and from every board to every other board for 100 GBps full duplex capacity
      • Carrier boards may be used as node boards in a chassis compliant with a future RapidIO subsidiary specification to PICMG 3.0
    • Ensemble BCC-101
      10 Gbps Serial RapidIO application deployment (+)

      Features:

      32465.jpg
      • 2-, 5-, and 14-slot AdvancedTCA chassis options
      • Dual 8-port Serial RapidIO switches
      • 4 full-height RapidIO-enabled AdvancedMC bays
    • Ensemble MPC-102
      The Ensemble MPC-102 Dual-Core 8641D AMC Module combines dual-core processing power and flexible I/O for AdvancedTCA and MicroTCA (µTCA) platforms (+)

      Features:

      34139.jpg
      • Dual-core Freescale MPC8641D processor running at up to 1.33 GHz, combined with memory and I/O options for maximum application flexibility
      • Single-width AdvancedMC, either mid-height or full-height, differing only by faceplate
      • Includes an IPMI controller, firmware, and IPMI links for chassis management-based control and configuration
    • Ensemble AdvancedTCA Application Platform
      Completely integrated 10 Gbps AdvancedTCA system solution (+)

      Features:

      35970.jpg
      • Modular configurations based on AMC form factor
      • Scalable with 2-, 5- and 14- or 16-slot configurations
      • Supports hot swappable AMC modules
    • Momentum AXA-110
      An Intel Core 2 Duo based Advanced Mezzanine Card (AdvancedMC) (+)

      Features:

      33151.jpg
      • Provides modularity for demanding telecom and military communications
      • Suited for processing and communications heart of AdvancedTCA or MicroTCA systems
      • Maximum I/O with up to 16 AdvancedMC Fat Pipes connected
    • Ensemble2 Platform
      Ensemble2 enables developers to evaluate and deploy their applications on the same platform (+)

      Features:

      32030.jpg
      • . Built around the power, functionality, and scalability of Serial RapidIO, AdvancedTCA, and AdvancedMC, the platform supports a variety of I/O sources and heterogeneous processing
      • Completely integrated 10 Gbps AdvancedTCA system
      • Modular configurations based on AdvancedMC form factor
    • Ensemble2
      Completely integrated 10 Gbps AdvancedTCA system solution (+)

      Features:

      20071.jpg
      • Modular configurations based on AdvancedMC form factor
      • Early access to latest serial RapidIO silicon
      • Ideal for application development
    • Momentum Series AXA-110 AMC
      Momentum Series AXA-110 Advanced Mezzanine Card (AMC), which uses a dual-core Intel processor combined with an FPGA (field-programmable gate array) for flexible switch fabric connectivity (+)

      Features:

      32646.jpg
      • AMCs provide the modularity for demanding telecom and military communications, and the AXA-110 is ideally suited for the processing and communications heart of AdvancedTCA or MicroTCA systems
      • The Momentum Series AXA-110 is Mercury's second generation of AMC cards that combine a dual-core Intel processor with the latest Xilinx FPGA. The AXA-110 is the first AMC to incorporate an Intel Core 2 Duo processor, which yields more than 25 percent overall performance improvement than an Intel Core Duo processor, and more than double the overall performance of Intel Pentium M processor, as measured by SPECint_rate_base2000
      • The key to accessing the substantial processing power is the connectivity provided by the serial fabric interfaces on the AMC. Using a Xilinx Virtex-5 FPGA, the AXA-110 connects to up to 16 high-speed serial lines totaling 40 Gigabits per second
  • Alliance Systems  (6)
    • A-12000 Powerful 12U, 14-slot ATCA Platform
      14-slot 12U ATCA system with dual-dual star PICMG 3.1 backplane (+)

      Features:

      21330.jpg
      • Supports two Intel shelf managers and 12 node slots for single or dual Intel Xeon 2.8 GHz ATCA CPU or other ATCA boards
      • Dual DC input with redundant removable PEMs with circuit breaker protection into midplane in four segments
      • Optimized airflow for efficient cooling from the serial parallel fan arrangement and supports 200 W per board or up to 3200 W of total power
    • A-14000
      Dual 2.0 GHz Xeon, 400 MHz, No FC (+)

      Features:

      19543.jpg
      • 1 GB 128Mx72 SDRAM DDR DIMM 2.5V Registered
      • On-board 30 GB High Duty 2.5" Hard Drive
      • 14-slot, fully passive, ATCA-compliant backplane wiith dual-dual star routing topology
    • A-14000 14U Powerful, High-Reliability ATCA Server
      14U rack-mount server (+)

      Features:

      20411.jpg
      • 14-slot, fully passive, PICMG 3.1 backplane with dual-dual star routing topology
      • Supports 12 node slots for single or dual Intel Xeon CPU or other AdvancedTCA boards
      • Supports up to two 16-port ZNYX PICMG 3.0 Gigabit Ethernet Base Fabric Switches with 10/100/1000 Mbps Ethernet
    • A-4000 Ultra-Compact 4U ATCA Platform
      Smallest AdvancedTCA system, 4U form factor (+)

      Features:

      21328.jpg
      • Five-slot dual-dual or star full mesh backplane
      • 70 mm rear transition module support
      • Dual DC input with redundant removable PEMs, circuit breaker protection, and optional dual AC input PEMs
    • A-5000 Compact 5U ATCA Platform
      5U rack-mountable AdvancedTCA system with five-slot full-mesh backplane (+)

      Features:

      21329.jpg
      • Supports two Intel shelf managers with bussed IPMB and three node slots for single or dual Intel Xeon 2.8 GHz CPU or other AdvancedTCA boards
      • Dual – 48 Vdc with power indicators or an AC version with 750 W power supply and dual hot-swap power supplies removable from the front with replicated mesh backplane
      • Meets NEBS requirements for cooling, noise, and shielding; providing two 290 CFM fans for cooling up to 200 W per board and designed for easy access to top board with removable top cover and cover plate
    • AdvancedTCA Servers
      Standards-based, open architecture meets reliability and scalability needs of next-generation networks (+)

      Features:

      • 14U, 441mm-deep (17.44"), rackmount enclosure
      • 14-slot, fully passive, AdvancedTCA-compliant backplane with dual-dual star routing topology
      • Support for up to 12 single or dual Intel Xeon AdvancedTCA CPU boards supporting up to 2.0 GHz on an Intel E7501 chipset and 4 Gbytes of PC2100 ECC Registered DDR RAM
  • ESO Technologies  (2)
    • ATCA -Tester
      AdvancedTCA Tester (+)

      Features:

      • Automated software tool testing AdvancedTCA equipment compatibility with respect to PICMG 3.0 specification system [...]
    • ATCA-Tester
      Automated software tool testing AdvancedTCA equipment compatibility with respect to PICMG 3.0 specification system management requirements (+)

      Features:

      21323.jpg
      • 72 test scenarios in 1.2.0 version based on PICMG 3.0 / IPMI 1.5 specifications and on AdvancedTCA interoperability workshops test scenarios
      • Test categories (depending on test target) include RMCP network, IPMC, FRU based (AdvancedMC ready), Sensors, Chassis, Shelf manager
      • Simultaneous test of several IPMC/FRUs in parallel possible
  • Avnet Electronics Marketing  (12)
    • ATCA Carrier Cards
      AdvancedTCA carrier cards for integrating CompactPCI and Compact Packet-Switching Backplane (cPSB) cards into an AdvancedTCA environment (+)

      Features:

      • Entry-level AdvancedTCA Base Interface carrier card provides interconnection to the PICMG 3.0-compliant data transport section, 10/100/1000Base-Tx fabric data interconnectivity in a dual star configuration, and an onboard IPMI controller
      • AdvancedTCA Full Mesh carrier card provides complete fabric interface connectivity for any CompactPCI boards,
      • Onboard Gigabit Ethernet switch with full mesh connectivity and alternate topologies including dual star, dual dual star, and limited meshes
    • ATCA-RT01 RTM
      Compatible with PDSi ATCA-F1, Sun Netra CP3220 (x86), and Sun Netra CP3260 (SPARC) AdvancedTCA blades (+)

      Features:

      36877.jpg
      • Onboard SAS storage up to 146 GB - field-removable hard disk drive
      • Front-panel access to onboard LSI SAS controller for connection to redundant storage arrays
      • VGA video - supports resolutions up to 1600 x 1200
    • ATCA-F1 Dual AMD Opteron® Blade PDSi
      The ATCA-F1 blade features two dual-core or quad-core AMD Opteron CPUs for high performance and low power consumption (+)

      Features:

      39364.jpg
      • Up to 32 GB 667 MHz memory
      • An AdvancedMC site and RTM interface provide I/O expansion capability (using PDSi ATCA-RT01)
      • This is a robust general-purpose server platform for telecom, aerospace, military, and enterprise AdvancedTCA systems
    • ATCA-RT01 Advanced RTM w/ Video & Storage
      The ATCA-RT01 provides high reliability SAS storage, VGA video output and additional I/O functionality for AdvancedTCA systems using x86 processor blades from PDSi or Sun Microsystems, plus Sun's Netra CP3260 blade (+)

      Features:

      39363.jpg
      • For telecom, aerospace, and military systems requiring a mix of these compute blades, the ATCA-RT01 can provide a common RTM solution
      • NEBS Level 3 compliant
      • Windows and Linux compatible
    • AMC-E24D Dual Display Graphics+Storage Module
      This mid-size AMC offers both high performance dual display graphics and SATA onboard storage in a single module (+)

      Features:

      45801.jpg
      • Featuring the AMD Radeon E2400 graphics controller, the AMC-E24D module supports two independent high resolution display devices (one digital HDMI and one analog VGA) and features 128MB of on-chip GDDR3 video memory for fast, high quality 2D and 3D graphics rendering
      • In addition, the module adds enterprise-grade SATA storage to xTCA systems
      • It carries a 2.5 inch hard drive (HDD) or solid state drive (SSD) with up to 320GB capacity for convenient local boot-up and storage
    • ATCA-N1 (Dual Intel Xeon E5 ATCA)
      The ATCA-N1 blade is a high performance computing platform that is designed to provide maximum computing, memory and storage flexibility in a single ATCA chassis slot (+)

      Features:

      • Intel-based AdvancedTCA blade server utilizing Intel’s 32 nm processor technology
      • Dual purpose memory sockets enable the use of up to 4 x SATADIMM solid state drives
      • mSATA solid state drive provides flexible expansion storage/boot option
    • ATCA-F1 Blade
      Dual AMD Opteron AdvancedTCA blade with RTM Interface is a robust, high-performance general purpose AdvancedTCA compute platform for telecom, miltary, and aerospace applications (+)

      Features:

      39450.jpg
      • Two dual-core or quad-core AMD Opteron CPUs for high-performance and low power consumption
      • Up to 32 GB 667 MHz memory in four DIMM sockets
      • Zone 3 RTM interface provide I/O expansion capability using PDSi ATCA-RT01
    • ATCA-RT01 Video+Storage Rear Transition Module
      The ATCA-RT01 provides high reliability SAS storage, VGA video output, as well as additional Ethernet and USB I/O for AdvancedTCA x86 processor blades from PDSi (ATCA-F1) or Oracle's (Netra™ CP3220) (+)

      Features:

      45799.jpg
      • With its industry standard Zone 3 interface, this RTM also operates with Oracle's UltraSPARC T2-based CP3260 blade
      • For systems requiring a mix of these compute blades, the ATCA-RT01 can provide a convenient single RTM solution
      • The robust ATCA-RT01 RTM has been thoroughly tested and successfully deployed in critical systems including military applications
    • ATCA-F0
      Up to two Quad-core or Dual-core AMD Opteron processors with HyperTransport technology (+)

      Features:

      36184.jpg
      • 4 DIMM sockets enable up to 16 GB DDR2 ECC Registered CP5300 (667 MHz) Memory
      • Backplane Interfaces - 2 x GbE Base and 4 x GbE Fabric, supports dual-star backplane topology
      • Front Panel Interfaces - 2 x GbE ports, 2 x USB 2.0
    • AdvancedTCA Reference Design Kit
      Xilinx 2VP50 or 2VP70 FPGA (+)

      Features:

      20419.jpg
      • CompactFlash programming card
      • PICMG compatible board form factor
      • 128 MB DDR SDRAM
    • Xilinx AdvancedTCA Reference Design Kit
      Xilinx 2VP50 or 2VP70 FPGA (+)

      Features:

      20410.jpg
      • CompactFlash programming card
      • PICMG compatible board form factor
      • 128 MB DDR SDRAM
    • AdvancedTCA Product Line
      Fully telco-grade PICMG 3.x compliant (+)

      Features:

      30254.jpg
      • Meets NEBS requirements including cooling, noise, and shielding
      • A platform for building carrier-grade telecom applications supporting five-nines (99.999 percent) availability
      • High-density/high-performance computing environment
  • Artesyn Embedded Technologies  (15 of 52)
    • ATCA-S201
      AdvancedTCA carrier blade (+)

      Features:

      42545.jpg
      • AdvancedTCA storage blade with four (4) mid-size AdvancedMC slots
      • Additional storage via RTM mounted hard disk drives (HDDs)
      • Up to 876 GB of storage per blade/RTM combination
    • Centellis 4100 ATCA 10GbE Platform
      AdvancedTCA platform (+)

      Features:

      33451.jpg
      • AdvancedTCA shelf to deliver 5-nines availability into central office environments
      • 13U/19" chassis with 14 vertical blade slots
      • Fault-resilient design to minimize hardware induced failures
    • Centellis 3406 ATCA Communications Server
      AdvancedTCA Communications Server (+)

      Features:

      33059.jpg
      • Fully integrated and verified AdvancedTCA based communications server
      • RoHS (5 of 6) compliant
      • 14-slot, 19", 12.5U form factor
    • Centellis 3600 ATCA Communications Server
      AdvancedTCA Communications Server (+)

      Features:

      33060.jpg
      • Fully integrated and verified AdvancedTCA based communications server
      • RoHS (5 of 6) compliant
      • 16-slot, 23", 12.5U form factor
    • ATCA-C121 AdvancedTCA AMC Carrier Blade
      The Emerson Network Power ATCA-C121 is a 10 Gigabit AdvancedTCA AMC carrier blade and is available for the Centellis 4000 series of communications servers (+)

      Features:

      36473.jpg
      • The flexibility of AMC technology provides application developers the ultimate flexibility in defining and allocating compute resources, telecom I/O and network connectivity
      • Modular design – four mid-size, single wide AdvancedMC (AMC) sites
      • Enables scalable and distributed computing
    • IPM300
      A rugged quarter brick 300 W dual-input power module solution implementing dual-redundant, hot-swap -48 V inputs with EMI filtering for AdvancedTCA (ATCA) boards (+)

      Features:

      • Optimized footprint for high density ATCA applications
      • Accepts inputs from -48 V and B Feeds
      • Hot swap and O-Ring functionality
    • ATCA-7301
      High performance AdvancedTCA processor blade for data and control plane applications (+)

      Features:

      34907.jpg
      • 2.16 GHz Intel Core 2 Duo processor
      • Onboard 24-port Gigabit Ethernet switch
      • AMC.0, AMC.1, and AMC.2 compliant with two mid-size AMC sites
    • ATCA-7470
      The Emerson Network Power ATCA-7470 is a 40G AdvancedTCA (ATCA) packet processing blade that enables the highest packet processing performance and security features in an ATCA form factor. The ATCA-7470 is designed to exploit the full capabilities of the two 8-core Intel Xeon processors E5-2600 family and Intel Communications Chipset 89xx Series, with an optimized balance of processing, memory, I/O, data movement and interfaces. (+)

      Features:

      217414316442796556.jpg
      • Two 8-core Intel Xeon processors, E5-2648L, 1.8 GHz
      • Up to 128GB main memory
      • Powerful hardware off-loading functions for en/decryption, compression, pattern look-up, based on two Intel Communications Chipset 8920
    • FlowPilot Packet Balancing Software for ATCA Platforms
      Artesyn’s FlowPilot™ software adds packet forwarding techniques beyond the standard switching and routing protocol support built-in to its ATCA-F140 high performance 40G ATCA hub blade. As a high bandwidth traffic flow separator and load balancer, FlowPilot can maintain flow context and packet sequence while separating traffic into application groups. FlowPilot allows you to manage the switching hardware to achieve lowest latency, full wire speed packet, and flow context aware packet distribution to and from all processing blades in your AdvancedTCA platform. The ability to monitor and process data streams on the fly is appealing in many application areas. Wireline and wireless carriers have an interest to provide contractually agreed services and quality. Enterprises extend their classical firewalls with highly sophisticated intrusion prevention systems. Service providers are interested in statistics about subscriber behaviors. FEATURES: High bandwidth traffic flow separator and load balancer Balance traffic to multiple AdvancedTCA® blades for packet monitoring and processing Maintain flow context and packet sequence Fully transparent for external network elements Separate traffic into application groups Redundant 160G external Ethernet connectivity 480Gbit/s internal bandwidth for packet processing [...] (+)

      Features:

    • ATCA-7221 AdvancedTCA Processor Blade
      High performance processor blade with SMP (+)

      Features:

      32574.jpg
      • RoHS (6 of 6) compliant
      • Dual 2.8 GHz Intel Xeon LV processors
      • Complete software operating environment including OS
    • ATCA-F140
      40G AdvancedTCA switch blade, the ATCA-F140 (+)

      Features:

      • The new 40G switch blade offers telecom equipment manufacturers a powerful combination of high bandwidth, high performance and maximum flexibility to help them drive the successful implementation of next-generation networks
      • The ATCA-F140 provides 1G, 10G and 40G fabric switching interfaces for backwards compatibility with a customer's existing payload blades, while enabling the maximum ATCA fabric bandwidth to meet the needs of the most data-intensive applications, including 4G Long Term Evolution (LTE) networks
      • The availability of a 40G switch blade is the next step in bringing the benefits of ATCA to more applications, especially those in the data plane
    • FlowPilotâ„¢
      Emerson’s FlowPilot™ software adds packet forwarding techniques beyond the standard switching and routing protocol support built-in to its ATCA-F140 high performance 40G ATCA hub blade. As a high bandwidth traffic flow separator and load balancer, FlowPilot can maintain flow context and packet sequence while separating traffic into application groups. FlowPilot allows you to manage the switching hardware to achieve lowest latency, full wire speed packet, and flow context aware packet distribution to and from all processing blades in your AdvancedTCA platform. FEATURES: High bandwidth traffic flow separator and load balancer ƒBalance traffic to multiple AdvancedTCA® blades for packet monitoring and processing Maintain flow context and packet sequence ƒƒFully transparent for external network elements Separate traffic into application groups Redundant 160G external Ethernet connectivity 480Gbit/s internal bandwidth for packet processing [...] (+)

      Features:

    • AXP640 40G AdvancedTCA Shelf
      Specifically designed to address carrier-grade requirements desired by the telecommunications industry as well as high availability enterprise environments. (+)

      Features:

      185979506184183131.jpg
      • The heart of the AdvancedTCA (ATCA) shelf is the 40G backplane. This allows for 40Gbps communication across the PICMG 3.1 fabric interface
      • Using this technology, it is possible to upgrade to 40GbE capable switch and payload blades in the future without replacing the shelf infrastructure
      • Equally important are the thermal characteristics of the AXP640 shelf. It is designed to exceed the CP-TA B.4 and newly defined PICMG thermal profile, the highest level possible
    • FlowPilot ATCA Platform Software
      FlowPilot(TM) software for the ATCA-F140, the Emerson Network Power high performance, high bandwidth 40G ATCA hub blade, adds packet forwarding techniques beyond standard built-in switching and routing protocol support. FlowPilot allows you to manage the switching hardware to achieve lowest latency, full wire speed packet, and flow context aware packet distribution to and from all processing blades in your AdvancedTCA platform. (+)

      Features:

      231320965142302672.jpg
      • Balance traffic to multiple AdvancedTCA® blades for packet monitoring and processing
      • Maintain flow context and packet sequence
      • Fully transparent for external network elements
    • ATCA-9405
      40G AdvancedTCA payload blade (+)

      Features:

      • Dual OCTEON(r) II CN6880 processors from Cavium each with 32 cnMIPS cores running at up to 1.5GHz
      • Enables packet processing applications at line speeds of 40Gbps
      • Two 40G AdvancedTCA data fabric connections
  • ELMA Electronic  (15 of 35)
    • Second Generation AdvancedTCA Handle
      The new Elma second generation ATCA handle incorporates a slide-motion button to latch the handle shut and to activate an optional micro-switch (+)

      Features:

      • This function is similar to the latching button on Elma's highly successful IEEE handles
      • In the closed position the handle is flush against the panel to protect against inadvertent opening prior to activating the micro-switch
      • Moving the sliding button activates the micro-switch and unlatches the handle so that it pivots out by a few degrees and presents itself to the operator for removal
    • 4U ATCA Chassis
      A 4U, 5-slot horizontal AdvancedTCA chassis with allotments for the Elma IPM Sentry shelf manager (+)

      Features:

      • 5-slot mesh ATCA backplane configuration compliant to PICMG 3.0 specifications
      • Two 2mm HM connectors allow direct plugging of the shelf manager into the backplane; two 3-pin headers for cabling to the IPM Sentry
      • Optional redundant connections of the IPMB signals
    • 6-slot ATCA Backplane
      Elma Bustronic Corporation, an industry leading designer and manufacturer of high performance backplanes has announced a 6-slot AdvancedTCA Backplane in a Mesh topology (+)

      Features:

      • The flexible design also allows a Dual Star topology to be implemented
      • The 6-slot AdvancedTCA backplane now features standard MicroTCA connectors used for connections to Elma's IPM Sentry shelf manager
      • The small and dense connector minimizes the space used on the backplane
    • 4U Type 39 ATCA
      A 4U, 5-slot, horizontal AdvancedTCA chassis (+)

      Features:

      14944.jpg
      • Designed to hold five 8U x 280mm blades on 1.2” spacing
      • Rear I/O options for 8U x 70mm cards
      • Chassis versions in both sheet metal and modular packaging designs
    • ATCA Dev. Chassis
      A PICMG 3.0-compliant, 5U AdvancedTCA development chassis (+)

      Features:

      15944.jpg
      • 700W AC input power supply provides 48V at 15A
      • 5-slot ATCA backplane
      • Full Mesh, Replicated Mesh, and Dual Star topologies can be implemented on the same backplane
    • 5U ATCA Dev. Chassis
      A PICMG 3.0-compliant, horizontal 5U AdvancedTCA development chassis (+)

      Features:

      • 700W AC-input power supply provides 48V at 15A
      • Five-slot AdvancedTCA backplane supports implementing Full Mesh, Replicated Mesh, and Dual Star topologies
      • Backplane has options for plugging with the IPM Sentry shelf manager
    • ATCA Test Extender
      AdvancedTCA Test Extender (+)

      Features:

      • Test points for all differential pair signals on the ZD connectors in P20-P24
      • Metal frame securely holds test board in place
      • Designed to meet mechanical and electrical connection requirement of PICMG Rev 3.0
    • ATCA Handles
      AdvancedTCA handles compliant to the PICMG 3.0 specification (+)

      Features:

      19008.jpg
      • Two-step design separates the locking/switching function and the extraction function
      • Provides a fail-safe method of hot-swap injection/ejection of the boards
      • Design allows easy adaptation to scope with different locations of the switch, especially in conjunction with mezzanine card applications
    • 2-slot ATCA Backplane
      A two-slot AdvancedTCA backplane (+)

      Features:

      21240.jpg
      • Point-to-point mesh topology
      • 10-layer stripline design with optimized routing through signal integrity studies
      • Includes connectors for direct plugging of the IPM Sentry shelf manager from Elma, or wired connections to other shelf managers
    • 5-slot mesh ATCA
      An AdvancedTCA, five-slot mesh backplane (+)

      Features:

      18371.jpg
      • Compliant to PICMG 3.0 specifications
      • Can use dual star, mesh, or replicated mesh configurations within the backplane
      • Two 3-pin headers for cabling to shelf management modules
    • AdvancedTCA, CompactPCI/2.16, MicroTCA, Custom
      New 40G AdvancedTCA backplanes, test reports available upon request (+)

      Features:

      • CompactPCI/2.16 backplanes in Pluggable, EasyCable, and Low Profile versions
      • MicroTCA backplanes in various configurations, including active version with IPMB for power and cooling intelligence
      • Largest selection of test accessories for cPCI, ATCA, MTCA (AMC), etc.
    • ATCA ESD Clips/Guide Pin Receptacles
      AdvancedTCA ESD clips and guide pin receptacles (+)

      Features:

      18579.jpg
      • ESD clips are snapped into place on both front and rear card guides and accept boards of various thicknesses
      • Ground pin receptacles are located along the mounting rails of the card cage, and accept the guide pins of the ATCA boards during plugging
      • Guide pin receptacles have EMC gaskets on the top and bottom [...]
    • 40G ATCA Backplanes
      40G AdvancedTCA (ATCA) Backplanes based on the design principles of IEEE 802.3-2008 and IEEE 802.3ba-2010 standards (+)

      Features:

      52974.jpg
      • 4 channels x 10 Gbps
      • Controlled-impedance stripline design of 18 layers in a Dual Star routing configuration
      • 10Gbps/link performance can be achieved
    • 13U ATCA chassis
      AdvancedTCA platforms come in 4U, 5U, 12U, and 13U heights (+)

      Features:

      18111.jpg
      • Include a wide range of backplane and shelf management
      • Three standard backplane options through backplane subsidiary, Bustronic
      • Backplanes include a 5-slot replicated mesh, a 14-slot dual star, and a 14-slot mesh with a section below the cards for plugging power entry modules and fan trays
    • ATCA backplanes
      AdvancedTCA backplanes have routing implemented for radial Intelligent Platform Management Bus (IPMB) signals (+)

      Features:

      36140.jpg
      • Radial IPBM provides dual segment access to every IPM controller even when only one shelf manager is present or operational
      • This is an important option for AdvancedTCA systems to provide higher reliability and redundancy
      • The backplanes also feature 14-slots with a Dual Star routing topology
  • Kontron  (15 of 36)
    • AT8001 ATCA processor board with 2x AMC
      Single slot AdvancedTCA PICMG 3.0/3.1 processor board (+)

      Features:

      22037.jpg
      • Intel Xeon up to 2.8 GHz
      • Dual AMC.1 module support
      • Dual DDR-II DIMM for 8 GB of PC2-3200 registered 400 SDRAM
    • OM9141-10G
      10G ATCA open modular platform OM9141-10G, featuring new advanced and faster bladed data transport, and switching and system management hardware. Kontron's 10 Gigabit Ethernet (GE) ATCA open modular platform is a starting point for telecom equipment manufacturers (TEMs) to build on a common platform a multitude of new equipment configurations using CPU, NPU, DSP, storage and specialized 3rd-party ATCA-based line cards that meet the requirements for 3G, 4G LTE, WiMAX, GPON, IPTV and carrier cloud network elements. (+)

      Features:

      193940339184183131.jpg
      • Redundant power entry module
      • Cooling infrastructure with hot swappable redundant fans
      • Second generation 10GbE switching capabilities based on the Kontron 10G ATCA switch AT8910
    • AT8904 - AdvancedTCA 10 GbE Hub board
      10GbE service to redundant Hub Board (+)

      Features:

      41092.jpg
      • 10GbE service to payload slots 2-15
      • 1x 1000Base-T uplink on front panel
      • Non-blocking Layer 2 switching with VLANs
    • XL8000 ATCA Chassis 12U NEBS Compliant
      12U height, 19" rack-mount (+)

      Features:

      22038.jpg
      • Cost effective riveted steel construction
      • 200 W per slot cooling
      • Two dual Xeon AdvancedTCA processor boards
    • AT8000 ATCA Dual Processor Board
      AdvancedTCA dual processor board (+)

      Features:

      22034.jpg
      • Dual Intel Xeon up to 2.0 GHz
      • Dual Gigabit Ethernet to the backplane
      • Optional Dual Fibre Channel interfaces
    • Updated 10/40G
      The rollout of an updated program that features two new carrier-grade, 14-slot 10G and 40G ATCA platforms: the Kontron Open Modular Core OM9141-10G and Open Modular Core OM9141-4 (+)

      Features:

      • Both platforms are integrated with new sophisticated and faster bladed data transport, switching and system management hardware that TEMs can use as a starting point to build multiple new equipment configurations using CPU, NPU, DSP, storage and even specialized 3rd-party ATCA-based line cards that meet the requirements for 3G/4G, LTE, WIMAX, GPON and IPTV network elements [...]
    • ATCA INTEGRATED OM PLATFORMS
      Kontron pre-validates, pre-tests and, of course, provides the flexibility to integrate 3rd-party ATCA/AMC hardware and HA middleware (+)

      Features:

      • Kontron offers GbE and 10 GbE AdvancedTCA and AMC platform elements, plus integration services that includes third-party hardware and carrier-grade OS and HA middleware solutions
      • OM9140 – ATCA 14-slot, 13U Integrated Platform: ideal for exceptional transaction processing performance with low latency and High Availability (HA) in a redundant N+1 configuration
      • OM9060 – ATCA 6-slot, 5U Integrated GbE/10GbE Platform: targeted at applications with high demands on the processing of transactions
    • AM4530 NAS Storage AMC Module
      Unique in the market, the Kontron AM453x AMC module is a cost-competitive storage solution for MicroTCA and ATCA platforms that require Network Attached Storage connectivity (+)

      Features:

      46582.jpg
      • Specifically for MicroTCA-based systems, the AM453x module provides access to storage for Processor AMC modules that are without a SATA connection
      • From an ATCA platform standpoint, the AM453x can be a single point of code storage for the entire system when populated in one or both AMC slots of the Kontron AT89xx switch
      • This makes it an ideal solution for fast boot code or application code updates [...]
    • OM9140
      The Kontron OM9140 series of 10GbE ATCA application-ready platforms offers carrier-grade, high-density solutions across a common platform capable of being converted into dedicated or cross-functional network elements for 3G and 4G wireless, IMS, IPTV, and core network applications (+)

      Features:

      46579.jpg
      • Kontron is currently assisting our TEM clients in a multi-phase migration program that prepares them to develop immediately with 40G-ready AdvancedTCA platforms and within a timetable that meets all the technical, cost, and revenue needs of our carrier and service provider clients [...]
    • AT8900 ATCA Base Interface Switch
      16 ports Gigabit Ethernet base fabric switch (+)

      Features:

      22033.jpg
      • Intel IX5416 GbE switch fabric
      • ZNYX Open Architect 3.0
      • Two Fast Ethernet ports for chassis and out-of-band management
    • AT8904 10GbE Switch
      AdvancedTCA 10 GbE Hub board with 10 GbE AdvancedMC uplinks (+)

      Features:

      39455.jpg
      • Suitable platform for open modular-based broadband media servers used to support Video on Demand (VoD) from a library of movies, delivered over DSL or CableTV networks, as well as VoD short videos from online service platforms, such as YouTube for example, delivered to mobile phones and wireless clients
      • Two AdvancedMC slots to host any of the following: processor AdvancedMC modules as main controllers; storage AdvancedMC modules as mass storage devices for Processor AdvancedMCs
      • Dual 10 GbE uplink AdvancedMCs to interlink the Fabric
    • AM42xx AMC Intelligent IO Modules
      Kontron portfolio of AMC Intelligent IO modules based on next-generation Cavium OCTEON™ Plus CN5650 multi-core packet processors (+)

      Features:

      41091.jpg
      • Two Intelligent AMC modules for ATCA and MicroTCA platforms
      • Kontron AM4204 with 4x 1 GbE ports to the front and software configurable Interfaces to the Fabric side (PCIe, 4x 1 GbE or XAUI)
      • The Kontron AM4220 with 2x 10 GbE to the front and PCIe to the fabric side
    • ATCA Platforms
      Faster time-to-market; Development cost savings; Reduced inventory costs; Faster upgrades to new technology (+)

      Features:

      36013.jpg
      • Achieve shorter lead times for build-to-order systems; Global service & maintenance
      • Designed for NEBS compliance; GbE and 10 GbE options; Customization with multiple AMCs
      • Applications: transcoding/encoding processing with high performance; low latency and HA; Call Servers; Media Gateway; Controllers; IMS-SCSF, HLR/HSS; OSS and BSS; DRM (Digital Rights Management) [...]
    • ATCA 10GbE Boards
      AT8030: 3 CPU, 3 possible applications (+)

      Features:

      36015.jpg
      • Dedicated SDRAM memory per CPU core
      • PCI Express x4 and dual GbE
      • AT8404: 5x 1 GbE each AMC with L2 switching; direct AMC interconnect for PCIe , Serial RapidIO, 10 GbE, or SAS/SATA
    • Kontron AT8050 ATCA Quad Core Blade
      Single Intel Xeon Quad-Core L5518 processor with integrated DDR3 memory controller (+)

      Features:

      42378.jpg
      • Support for up to 48 GB on 3 channels, DDR3 1,066MHz, ECC, registered SDRAM on 6 DIMM sockets total
      • 1x mid-size AMC bay
      • Dual 10 GbE on fabric interface
  • SANBlaze Technology, Inc.  (15)
    • SB-RTM440
      A Rear Transition Module (RTM) for AdvancedTCA systems (+)

      Features:

      45524.jpg
      • Designed specifically to work with the RadiSys Promentum ATCA-4500 blade
      • The SB-RTM440 offers numerous GbE networking features for enterprise ATCA applications, including support for multicore processors and optimizations for server virtualization
      • Functionally, the SB-RTM440 utilizes two PCI Express x4 buses to connect with multiple independent Ethernet controllers
    • SB-RTM468
      The SB-RTM468 rear transition module (RTM) for ATCA accommodates up to 8 1.8 “ SSD drives which can combine to provide over 2 terabyte (TB) of storage (+)

      Features:

      52505.jpg
      • RTM featuring PCIe to Solid-State Storage
      • ATCA PICMG 3.0
      • PCI express Gen2 signaling
    • ATCA2000 RAID Blade
      The SB-ATCA2000 utilizes 2.5” disks attached using front-access disk FRUs or RTM (Rear Transition Modules). To double the available storage, add the ATCA2020 JBOD blade. All storage blades utilize best-of-breed standard components with optimal thermal and power profiles. (+)

      Features:

      52797.jpg
      • ATCA PICMG 3.0, Rev 2.0: Redundant 10Gb Fabric; Redundant 1Gb Base
      • Dual core, Dual memory: Nehalem CPU (1.73GHz); Two 72b DDR3 1066MHz (2GB total)
      • SAS RAID 0,1,5 and 6 with 512MB cache: LiON battery (standard)
    • SB-RTM468™
      Rear transition module (RTM) for ATCA (+)

      Features:

      52517.jpg
      • Accommodates up to 8 1.8 “ SSD drives which can combine to provide over 2 terabyte (TB) of storage
      • RTM featuring PCIe to Solid-State Storage
      • ATCA PICMG 3.0
    • ATCA-1000
      AdvancedTCA RAID Storage Blade with four AdvancedMC slots, specifically tailored to provide multiprotocol IP storage services within a telecom shelf, including iSCSI, NFS, and CIF (+)

      Features:

      34457.jpg
      • Robust storage centric blade
      • Integrates proven, best-of-breed standard components with optimal thermal and power profiles
      • High availability functions include RAID1/0 implemented in hardware, hot sparing AdvancedMC drives, and redundant 10 Gb fabric and 1G Ethernet base connections
    • ATCA2000 SSD Blade
      The ATCA2000 SSD Blade with networked flash revolutionizes the bandwidth and capacity achievable with a single ATCA slot. With up to 6TB of solid state flash storage capacity, it boasts 1500MB/s of sustained backplane bandwidth, high IOPS (25,000) and low latency. (+)

      Features:

      18305179820966366.jpg
      • AdvancedTCA storage blade
      • SSD Blade with networked flash
      • Supports up to ten 2.5” hot swappable, enterprise class SSD (solid state drives), using MLC, eMLC or SLC based flash chips
    • SB-RTM403
      The SANBlaze SB-RTM403 is a Rear Transition Module (RTM) for AdvancedTCA systems (+)

      Features:

      45178.jpg
      • Several connections on the rear panel with pass-through signal routing to the front AdvancedTCA board, including SAS, PCI Express (PCIe), Serial console and 1 Gb Ethernet
      • All rear panel connectors are compatible with commodity off-the-shelf, nonproprietary cables
      • The SB-RTM403 fits several deployment configurations that extend functionality of SBC (single board computer) blades
    • SB-RTM401
      The SANBlaze SB-RTM401 is a rear transition module (RTM) that features a SAS expander which provides a storage I/O path between the front AdvancedTCA board and rear I/O access panel (+)

      Features:

      45176.jpg
      • The front AdvancedTCA board connection conforms to the 3-row Advanced RTM standard
      • Optionally, the module may be populated with up to four (4) SAS, SATA or SSD 2.5" disk drives
      • On the rear panel, the SB-RTM401 provides a 4-lane connector that allows direct connection to an external host blade
    • SB-RTM402
      The SANBlaze SB-RTM402 is a rear transition module (RTM) that features a SAS expander that provides a storage I/O path between the front AdvancedTCA board and rear I/O access panel (+)

      Features:

      45177.jpg
      • The front AdvancedTCA board connection conforms to the 3-row Advanced RTM standard
      • Optionally, the module may be populated with up to two (2) SAS, SATA or SSD 2.5" disk drives
      • On the rear panel, the SB-RTM402 provides two 4-lane SAS connectors that allow direct connection to an external host blade
    • SB-RTM431
      The SANBlaze SB-RTM431 is rear transition module (RTM) that features a SAS expander and two removable disk FRU (field replaceable units) (+)

      Features:

      45179.jpg
      • The innovative disk sled fits wholly within the RTM thermal envelope, providing a deterministic environment for proper disk cooling
      • The front AdvancedTCA board connection conforms to the 3-row Advanced RTM standard
      • Buying configurations exist for SAS, SATA or SSD 2.5" disk drives
    • SB-ATS1936
      10G AdvancedTCA Switch for DTI's Targa Line of AdvancedTCA nodes, switches, and platforms (+)

      Features:

      32993.jpg
      • IPv6 routing support on base and fabric
      • 10G Ingress on both base and fabric
      • Three AdvancedMC sites and high availability
    • SB-ATCA1020
      The SANBlaze SB-ATCA1020 is an AdvancedTCA carrier board providing in-chassis JBOD expansion to accommodate up to four (4) AMC SAS, SATA or SSD drive modules (+)

      Features:

      45175.jpg
      • The SB-ATCA1020 connects the AMC slots to the RTM via zone-3 connector and conforms to the 3-row Advanced RTM standard
      • The SB-ATCA1020 blade accommodates up to four mid height (MH) modules, wired with AMC.3 storage signaling
      • The configuration permits easy in-chassis JBOD, with present capacity options up to 2 TB (TeraBytes)
    • SB-ATCA1010
      The SANBlaze SB-ATCA1010 is an AdvancedTCA carrier board featuring a 2.5G Hz PCI Express switch, which ties together four front AMC slots with the RTM zone-3 connector (+)

      Features:

      45174.jpg
      • AMC slots are configurable as either upstream or downstream PCIe using a micro DIP located on the blade
      • The SB-ATCA1010 provides the ideal PCIe expansion solution when paired with the SANBlaze SBARTM403P rear transition module
      • The SB-ATCA1010 blade accommodates up to four mid height (MH) modules, and is wired with AMC.1 PCIe signaling
    • SB-AMC-SAS
      Advanced Mezzanine SAS Adapter (+)

      Features:

      32124.jpg
      • 8 SAS/SATA ports
      • 3 Gbps per port
      • Integrated RAID 0, 1, 1E, and 10E
    • RCP-Tactical Ops
      A rugged AdvancedTCA solution for C4ISR applications such as shipboard, ground, and airborne battle management and communications systems (+)

      Features:

      • Can be used for frontline field or fixed-mount deployments
      • Supports SIPRNet and NIPRNet
      • Modular with building blocks comprised of storage, networked computing elements, and switch and payload blades that comply with the AdvancedTCA standard
  • Carlo Gavazzi Computing Solutions  (4)
    • ATCA Starter Kit
      A complete AdvancedTCA development system (+)

      Features:

      • Available with a six slot, full mesh backplane that supports the AdvancedTCA PICMG 3.0, 3.1, 3.2, 3.3, 3.4, and 3.5 specifications
      • Supports AdvancedTCA hardware and software testing and development
      • Can be used as a system for proof of concept and customer demonstrations
    • 5U ATCA System
      Carlo Gavazzi's 544 Series of 5U AdvancedTCA Systems meets the high-reliability, robust power requirements, thermal management demands, and NEBs needs of the telecommunications, enterprise, and datacom marketplace (+)

      Features:

      • 8.75" (5U) ()H x 17.5" (W) x 16.4" (D)
      • 5 slot 3X Replicated Full Mesh extended fabric backplane
      • Front and rear removable push pull intelligent cooling system that provides redundant cooling for 200 watts per slot front side and 30 watts back side
    • 13U ATCA Systems
      Suitable for the high-reliability, robust power requirements, thermal management demands, and NEBS needs of the telecommunications, enterprise, and datacom marketplace (+)

      Features:

      • 22.75" (13U) (H) x 17.2" (W) x 17.7"(D)
      • Available with a 14 slot dual star or full mesh backplane
      • Front removable push pull intelligent cooling system that provides redundant cooling for 200 watts front side and 30 watts back side per slot
    • AdvancedTCA Filler Panels
      8U x 6HP form factor (+)

      Features:

      • EMI gasket provided [...]
  • TeraChip, Inc.  (4)
    • 160 Gbps ATCA Switch Fabric Card
      The TeraChip TSC-160XUI-A1 is an operational 160 Gbps switch fabric card for standard AdvancedTCA chassis, offering the low risk, simplicity and scalability of AdvancedTCA standard devices (+)

      Features:

      18710.jpg
      • Designed for switch vendors serving the enterprise (LAN), storage (SAN), and metro (MAN) markets
      • The TSC-160XUI-A1 is based on TeraChip's TCF16X10 scalable single-chip switch fabric device, capable of switching data streams of 10 Gbps using a shared-memory architecture that supports: 16 slots of 10Gbps per slot
      • 8 priority queues per port
    • TeraChip TLC-NIC101 10Gbps ATCA Line Card
      The TeraChip TLC-NIC101 is a 10 Gbps AdvancedTCA line card constructed with TeraChip's TCI1X2RC switch interface device and EZchip NP-1c NPU and provides a 10 Gbps switch connection by 10x1 Gbps Ethernet connections (+)

      Features:

      22372.jpg
      • Supports different redundancy schemes for the fabric and for the line ports
      • Allows faster time to market for network application that can be developed based on the EZchip NP-1c network processor and the TeraChip switch fabric [...]
    • TCF16X10
      AdvancedTCA compliant 160 Gbps solution (+)

      Features:

      30215.jpg
      • Single chip-based solution with low power consumption of only 15 W
      • Scalable up to 320 Gbps in and AdvancedTCA chassis
      • Switch card redundancy of 1:1 and 1+1
    • 160 Gbps Switch Fabric Solution
      AdvancedTCA compliant 160 Gbps solution (+)

      Features:

      20401.jpg
      • Single-chip based solution with low power consumption of only 15 W
      • Scalable up to 320 Gbps in an AdvancedTCA chassis
      • Switch card redundancy of 1:1 and 1+1
  • Advantech Corporation  (12)
    • DSPA-8901 AdvancedTCA® DSP Blade
      With its 20 onboard TMS320C6678 DSPs at 1.0GHz core frequency, the DSPA-8901 provides 160 cores of processing power to reach the levels of performance density needed to build the highest capacity media gateways. The DSPA-8901 significantly reduces overall system power dissipation and system cost, and frees up valuable slots in gateway elements for additional subscriber capacity and throughput. The DSPA-8901 includes a high-performance Freescale QorIQ P2020 processor. A Broadcom BCM56321 switch terminates the 10 Gigabit Ethernet fabric connections and distributes traffic to the 20 DSPs. The DSPA-8901 offers unrivaled packet and media processing capabilities. For increasing demand in high-end video conferencing, broadcasting and tele-presence fields, the DSPA-8901 ATCA blade also offers unmatched image processing performance for compression and decompression, image analysis, filtering and format conversion. FEATURES: ››20 Texas Instruments TMS320C6678 DSPs ››512 MB - 2 GB DDR3 memory per DSP ››BCM56321 10GbE switch for both Fabric Interface and Base Interface ››Freescale® QorIQ® P2020 for Local Management Processor (LMP) ››IDT Tsi577 Serial RapidIO switches ››Pigeon Point System IPMI 2.0 ››Wind River Linux PNE-LE 4.0 support for P2020 ››Single-slot PICMG 3.0/3.1 compliant [...] (+)

      Features:

    • Netarium ATCA Reference Systems
      Advantech’s Netarium™ series of ATCA Reference Systems are specifically targeted to help network equipment providers reach superior levels of performance over traditional rackmount servers or appliances used to extend their product range at the high end. The series represents a new generation of systems that offers superior performance, scalability and flexibility with the latest 40G backplanes, switches and application blades. We optimize the systems to achieve the highest possible density at the rack level, with a maximum number of payload blades, network ports and switching capacity. Each system is tailored for customers to rapidly deploy in applications that require faster and deeper packet processing, such as PCEF, network security, real-time traffic monitoring, load balancing, subscriber analytics and content optimization, among others. The systems integrate the chassis, cooling, power distribution and shelf management into an off-the-shelf platform solution capable of superior 5 NINES availability and reliability. FEATURES: ››14 SLOT: ––19" wide, 13U high AdvancedTCA Shelf fully integrated ––Up to 12 MIC-5333 or MIC-5332 Dual Intel® Xeon® blades ––Dual-Star backplane with 40G Switches ››6 SLOT: ––19" wide, 6U high,AdvancedTCA Shelf fully integrated ––Up to 4 MIC-5332 or MIC-5333 Dual Intel® Xeon® blades ––Dual-Star backplane with 40G Switches ››2 SLOT: ––19" wide, 3U high, AdvancedTCA Shelf fully integrated ––2 MIC-5333 Dual Intel® Xeon® blades and RTM-5104 Further configurations are possible including Advantech's ATCA-7310 Dual Cavium Octeon CN6880 blade and DSPA-8901 DSP-based Media Processing Blade. [...] (+)

      Features:

    • Netarium ATCA Series
      Advantech’s ATCA solutions are more than just hardware designs as we go much further than an ordinary ODM. We ensure that our systems not only have outstanding stability secured by a world-class design quality assurance process, but are enhanced by building in features which improve availability, serviceability and usability. Features which have a moderate impact on cost as they have been carefully designed by Advantech’s in-house engineering teams and are kept consistent across the product line. (+)

      Features:

      304778468861195043.jpg
      • Netarium-14 systems
      • MIC-5342 Telecom Blade
      • MIC-5345 Server Blade
    • MIC-5322 10 GbE dual Intel® Xeon® 5500 ATCA blade
      The MIC-5322 is a dual processor Intel Xeon 5500-based AdvancedTCA blade for systems able to cool over 200W per slot (+)

      Features:

      44164.jpg
      • It enables the highest performance available in an AdvancedTCA form factor with 8 cores and 16 threads of processing power, low DDR3 memory latency, fast PCI Express 2.0, and accelerated virtualization
      • The Intel 82599 10 GbE controller plays a key role in end-to-end network performance and throughput, including a 5 Gbps PCI Express 2.0 interface to improve the entire data path as well as multicore optimized queue support
      • For fast and secure database applications, the blade supports up to 48GB of triple channel DDR3 with ECC
    • MIC-5333 AdvancedTCA Dual Intel® Xeon® E5 Series Blade
      The MIC-5333 is a 40G dual processor blade based on the Intel® Xeon® Platform for Large-Scale Communications Infrastructure Systems. It enables the highest network and packet processing performance available on ATCA, with up to 20 cores of processing power, hardware acceleration for encryption and compression based on Intel® QuickAssist technology, and support for up to four 40G fabric ports. PCIe Gen. 3 at 8Gbps per lane and best-in-class virtualization combined with superior thermal design make it ideal for high performance workload consolidation. Two QPI interfaces between CPUs improve memory throughput and latencies when one processor needs to access resources hosted by the other socket. Four DDR3 DIMMs per socket in a quad channel design running up to 1600 MT/s offer superior memory bandwidth over 3-channel designs, and support memory densities up 256 GB using the latest LR-DIMMs. It outperforms previous-generation designs while maintaining similar thermal characteristics through balanced airflow resistance. FEATURES: ›› Two 10-Core Intel® Xeon® E5-2600 v2 processors ›› Intel® Communications Chipset 89xx Series ›› Eight DDR3 VLP DIMMs with ECC support ›› Up to four 40GBaseKR4 ports on Fabric Interface to support Dual-Dual Star Topology ›› Other fabric configurations supported via two Fabric Mezzanine sites (type I) ›› Two 10/100/1000BASE-T front panel ports ›› One Fabric Mezzanine Module (type II) for optional front I/O or additional acceleration ›› Fully managed, hot swappable RTM with 36 PCIe gen. 3 lanes [...] (+)

      Features:

    • ATCA-7410 Dual XLP832 ATCA Node Board with 40GbE Switch
      Dual Netlogic XLP832 1.6 GHz 8-core MIPS64 processors (+)

      Features:

      • 64 GB DDR3 1333 MHz DIMMs; 32 GB for each XLP832
      • 40 GbE(KR4) and 4x10 GbE(KR) FI support
      • Dual-star to 5-slot mesh support
    • ATCA-7310
      Dual CN6880 ATCA Node Board with 40GbE Switch (+)

      Features:

      195751557961163870.jpg
      • Switch management support on L2, QoS, Multicast (SW options)
      • 8x 10GbE SFP+ and 4x 1GbE SFP Rear I/O support
      • Dual Star routing support
    • ATCA-7310 Dual Cavium Octeon CN6880 ATCA Blade with 40G Switch
      Based on the Cavium Networks CN6880 OCTEON II processor, the high-end ATCA blade features dual processors with 32 MIPS64 cores for a total of 64x 64-bit cores per blade. The ATCA Packet Processing Engine is targeted at high-end control, service and dataplane applications in 4G/LTE networks, video and data applications typical of cloud computing, and security applications using Deep Packet Inspection (DPI). The ATCA-7310 supports up to 64GB of DDR3-1066 memory with a Broadcom BCM56841 40GbE switch. Four 10G/40G Fabric interfaces (40GBaseKR4, 10GBaseKX4) are supported with 12 lanes of 10GbE to the RTM for uplinks. The blade also provides support for dynamic clock and core management, console server, remote upgrade, and LMP boot image supporting HPM.1. FEATURES: ››Dual Cavium Octeon II CN6880 1.0 GHz with 32 cnMIPS™ II processor cores ››Up to 64 GB DDR3 1066 MHz DIMMs; 32 GB for each CN6880 ››40 GbE (KR4) and four 10 GbE (KR) FI support ››Dual Star routing support ››Eight 10GbE SFP+ and four 1GbE SFP Rear I/O support ››Switch management support on L2, QoS, Multicast (SW options) [...] (+)

      Features:

    • Dual-Core ATCA Blade with 2 AMC
      Two Dual-Core Intel Xeon processors LV 2.0 GHz (+)

      Features:

      35978.jpg
      • Intel E7520 chipset supports 667 MHz FSB
      • Dual channel DDR2 400 MHz ECC Registered SDRAM, configurable up to 16 GB
      • Four 1000BASE-BX ports on Fabric interface, two 1000BASE-Tx ports on Base interface
    • ATCA-9112 40G Switch with Processor AMC Application Blades
      ATCA-9112 40G Switch Blade with AMC slot The ATCA-9112 switch blade provides 10/40GbE switching for up to 16 slots and 8 front panel uplinks with a 640Gbps non-blocking fabric switch from Broadcom. Designed for network security, LTE and DPI-centric applications, the ATCA-9112 offers the highest aggregate switching bandwidth within an ATCA chassis, enabling support for up to 16-slot systems. A Broadcom BCM56846 ensures seamless integration through open standard hardware supporting 40GbE or 10GbE ATCA node blades. A Broadcom BCM56321 provides ATCA base interface connectivity. The switch offers a flexible approach to hub blade functionality via a mid-size AMC site to host control plane, application processing, acceleration or offload functions. Advantech’s Freescale P4080-based AMC-4201 or x86-based MIC 5603 PrAMC can be used to consolidate processing requirements. MIC-5603 Processor AMC The MIC-5603 is a single-width mid-size processor AMC. Its design is based on 3rd generation Intel® Core™ processors in a BGA package combined with the Intel® QM67 chipset. The card supports processors with integrated memory and graphics controllers, and a maximum L3 cache of 4MB. It can support up to 8GB, dual-channel, on-board DDR3 memory with ECC at 1600 MHz, making it ideal for switching applications requiring low latency and reliable memory access. A standard feature, external Ethernet connectivity is provided on two dedicated GbE front panel ports, one each from the Intel® QM67 PCH and the onboard Intel® 82580 quad port LAN controller, which also provides two additional GbE ports to the AMC base fabric. The Intel® PCH brings remote management capabilities with KVM-over-LAN, and introduces faster I/O than previous generation designs with SATA-III to AMC ports 2..3 and PCIe x4 gen.2 to ports 4..7. This module can also be configured to boot from the network, local CFast compact flash or flash disk, or external storage media such as HDD or USB drives. AMC-4201 Processor AMC The AMC-4201 is a single-width, mid-size AMC based on the Freescale P4080 processor. It combines eight Power Architecture® e500-mc Cores operating at frequencies up to 1.5 GHz with high-performance, datapath acceleration logic, extensive networking I/O, and peripheral bus interfaces. It combines powerful multicore Power Architecture performance with network processing capabilities, and builds on the communications ubiquity of Freescale’s QorIQ® product family. AMC-4201 provides 4 and 8 GB build options for onboard DDR3 memory at 1333 MHz with ECC support. One front-panel 10GbE SFP+ connector provides network access in addition to a front panel console and debug port. The unique SERDES design supports up to four different AMC port configurations for a mix of SRIO, PCIe, XAUI and SGMII channels. This makes the AMC extremely versatile and caters to a wider range of MicroTCA or ATCA Carrier topologies beyond just telecom applications. 4 MB SPI Flash and 2 GB NAND Flash provide onboard options for software and storage. The AMC also provides 8 KHz and 19.44 MHz telecom clock synchronization support. FEATURES: ››40GbE switch blade provides 10/40GbE switching for up to slots ››10/40GE fabric interface with eight 10GE uplinks ››Fabric interface bandwidth up to 640Gbps ››Separate base and fabric interface switching for enhanced security and protection ››Mid-size AMC site for host application processing, acceleration or offload functions [...] (+)

      Features:

    • MIC-5304
      10 GbE AdvancedTCA Fabric Hub Blade (+)

      Features:

      • PowerQuiCC III device
      • Inegrates latest Broadcom 10GbE and GbE switch technology
      • PowerQuiCC III runs Broadcom's FASTPATH Enterprise Software suite [...]
    • MIC-5401 SAS/SATA Storage AMC
      The Advantech MIC-5401 is a single-width/mid-size Advanced Mezzanine Card (AMC) designed to support a 2.5" SAS or SATA hard disk drive to work as an enterprise storage module on an AdvancedTCA platform or in a MicroTCA shelf (+)

      Features:

      44169.jpg
      • The 2.5" hard disk drive is connected to the AMC port 2 (SAS and SATA) and port 3 (SAS only) according to the AMC.3 specifications
      • Dual port SAS drives may be used on the MIC-5401 to increase the interface bandwidth of failover support between dual hosts in fault tolerant environments
      • Single-width, mid-size AMC form factor
  • Infranet  (9)
    • USPB-3000 : ATCA Backplane
      AdvancedTCA compliant backplane (+)

      Features:

      21285.jpg
      • 14 slots
      • Dual star
      • Full mesh [...]
    • USPS-3000 : ATCA switch fabric
      AdvancedTCA compliant switch fabric (+)

      Features:

      21288.jpg
      • PICMG 3.0 and 3.1 compliant
      • Base I/F: 24 Gigabit Ethernet ports
      • Fabric I/F: 24 Gigabit Ethernet ports [...]
    • UniPlat-3000 : ATCA system platform
      AdvancedTCA compliant system platform (+)

      Features:

      • Chassis
      • Backplane
      • Fan Tray
    • USPS-3000 : ATCA Ethernet Switch Card
      AdvancedTCA compliant Ethernet Switch Card (+)

      Features:

      21282.jpg
      • Base I/F : 24 Gigabit Ethernet ports
      • Fabric I/F : 24 GE ports
      • Layer 2 and optionally Layer 3 function
    • USPS-3200 Series
      AdvancedTCA 3.0 and 3.1 option 2 compliant switch blade (+)

      Features:

      35822.jpg
      • 48 GbE service for interfacing with node boards via Base Interface and Fabric Interface
      • Compliant with PICMG 3.1 option 2 and USPS-3200-9 option 9, each of which enables user to excel in demanding and diverse systems
      • USPS-3000 series: USPS-3000B designed for Base Interface only and USPS-3000F supporting Fabric Interface
    • USPS-3000
      Omni Device USPS-3000 is a fully AdvancedTCA 3.0 and 3.1 compliant switch blade that provides 24 Gigabit Ethernet base interface ports and 24 Gigabit Ethernet fabric interface ports (+)

      Features:

      32133.jpg
      • Fully PICMG 3.0/3.1 option 1 compliant switch fabric
      • 24 GbE ports for base I/F and 24 GbE ports for fabric I/F
      • Support up to 16 slot AdvancedTCA shelf
    • USPS-3200
      Fully AdvancedTCA 3.0 and 3.1 option 2 compliant switch blade (+)

      Features:

      32134.jpg
      • Optionally support option 9 for 2 specific slots
      • Fully PICMG 3.0/3.1 option 2 compliant switch fabric
      • Support partially PICMG 3.1 option 9 (10 GbE) for specific 2 node slots optionally
    • UniPlat-3000DS/GM
      12U, 14-slot AdvancedTCA shelf with 2 shelf manager, 3 fan tray, 2 PEM, and dual star backplane or group full mesh backplane (+)

      Features:

      32131.jpg
      • Fully PICMG 3.0 compliant AdvancedTCA shelf
      • 12U height, 14 slots
      • Support dual star midplane, optionally grouped full mesh structure
    • UniPlat-3005RM
      Fully PICMG 3.0 compliant AdvancedTCA Shelf (+)

      Features:

      32132.jpg
      • 5U height, 5 slots
      • Support replicated mesh midplane
      • One fan tray with redundancy fans
  • Pentair Electronics Protection  (2)
    • 100G ATCA
      Pentiar's Schroff brand is proud to introduce 100G backplane transmission rates to the AdvancedTCA product family. Offering 450 watts per slot of cooling backed by dependable chassis management solutions, Schroff ATCA leads the market in performance and quality. With superior physical construction, optimal cooling, reliable power supplies, efficient data distribution and secure system management, Pentair’s Schroff ATCA solutions are your choice for a dependable solution. (+)

      Features:

      344672056861147797.jpg
      • 2, 6 and 14 slot backplanes
      • 40 & 100 Gbps (10GBASE-KR) transmission rate
      • Up to 450 watts/slot cooling
    • ATCA ECO Modular Chassis
      The shelf is developed to be easily adapted to the application power and cooling needs. (+)

      Features:

      333793294861986168.jpg
      • The modular approach allows you to choose from several configurations, like backplane topology, 250 or 450 W per slot, redundant or nonredundant power entry and many more.
      • The modules are assembled into the 14U, 14 slot chassis. Airflow direction is front to rear and power entry is in the rear.
      • The chassis supports a shelf manager or has the option to run autonomously without management.
  • JumpGen Systems  (2)
    • PRA-200 ATCA Node
      The PRA-200 ATCA Node Blade is a single-slot AdvancedTCA blade supporting 1 or 2 Intel low voltage Xeon Quad-Core Processors and either AdvancedMC, PMC, or SATA HD expansion options (+)

      Features:

      38940.jpg
      • 1 or 2 low-power Intel Xeon processor L5408 (quad-core) running up to 2.13 GHz or Intel Xeon processor L5238 (dual-core) up to 2.66 GHz or other Intel Xeon processors 5400, 5300, 5200, and 5100 Series
      • Intel 5100 Memory Controller Hub supporting Front Side Bus up to 1333 MHz
      • Up to 32 GB of ECC DDR2 memory running at 667 MHz
    • T6M-100
      AdvancedMC (PrAMC) platform (+)

      Features:

      38569.jpg
      • TILE64 processor with 64 cores running at 700 MHz
      • 2 GB of ECC DDR2 memory running at 800 MHz
      • Up to 8 GB of persistent memory
  • Kaparel Corporation  (10)
    • Backplanes
      CompactPCI backplanes designed to accommodate rear mount , low profile bridge modules (+)

      Features:

      41088.jpg
      • CPCI- PICMG 2.16 Ethernet Packet Switching Backplane specification
      • CPCI- PICMG 2.17 Star Fabric Specification
      • CPCI- CompactPCI H.110
    • ATCA System Platforms
      High-speed backplanes,10 Gbps, designed for advanced switching, Ethernet, InfiniBand, S-RapidIO Star Fabric (+)

      Features:

      • Shielding for NEBs, FCC, and EU standard
      • Stainless steel construction,corrosion resistance
      • AdvancedTCA System solutions available 13U, 12U, and 5U configurations
    • AdvancedTCA Shelf
      Redundant brushed stainless steel AdvancedTCA shelf (+)

      Features:

      33889.jpg
      • Complies with the PICMG 3.0 specification
      • Integrated sub-rack, dual hot swap fan tray
      • 19" rack-mount, 482.6 mm, 5U, 400 mm deep
    • High Speed Backplanes
      Off-the-shelf and custom high-speed backplane solutions (+)

      Features:

      • Faster-to-market solutions for embedded applications
      • VME, CompactPCI, Switch Fabric, and AdvancedTCA architectures
      • Utilize quality standards and procedures and continuous improvement
    • AdvancedTCA Faceplates
      A complete range of PICMG 3.0 AdvancedTCA face plates, filler panels and handles in brushed stainless steel (+)

      Features:

      • Each Face Plate comes with 2 locking latches attached
      • Face Plates provide for the I/O interface
      • Filler Plates are used in place of unused/reserved slots and provide for EMI protection and air-flow management
    • AdvancedTCA Face Plates
      A range of PICMG 3.0 AdvancedTCA face plates, fillers, panels, and handles in brushed stainless steel (+)

      Features:

      19851.jpg
      • Available with optional EMC gasketss; adhesive foam, adhesive finger stock, or mechanical snap-in styles
      • Handle locking device acts as a grounding feature and securely locks the handle under seismic Zone 4 conditions (NEBS Level 3) [...]
    • AdvancedTCA Developer Chassis
      AdvancedTCA development platform (+)

      Features:

      15027.jpg
      • Intended for developers of telecom systems designed to comply with the PICMG 3.0 specification
      • Provides a 19” open sided bench top with a Kaparel full-mesh or dual star architecture 14-slot backplane
      • The 13U x 84HP chassis accommodates 14-Slots of 8U x 6HP x 280mm front boards and 8U x 6HP x 70mm rear-transition modules
    • AdvancedTCA Enclosures
      Case solutions in 5U, 12U, 13U, or custom (+)

      Features:

      34485.jpg
      • Climate control concepts up to 200 W/board
      • High speed backplanes up to 10 Gbps
      • Systems available up to Level 5 for AdvancedTCA and MicroTCA
    • Customizable AdvancedTCA Shelf
      A Full-Mesh 13U, 14-slot AdvancedTCA shelf (+)

      Features:

      17468.jpg
      • Complies with the PICMG 3.0 specification
      • Accommodates 14 slots of 8U x 6HP x 280 mm boards and 14 slots of 8U x 6HP x 70 mm Rear Transition Modules (RTMs)
      • A one-piece card guide platform also provides EMI shielding
    • AdvancedTCA Enclosure Family
      Rittal incorporates innovative components to produce reliably available systems up to level 5 for AdvancedTCA and MicroTCA (+)

      Features:

      30136.jpg
      • Everything is fully assembled, ready to run and individually configured
      • And the same naturally applies equally for CompactPCI, VME, and VME64x
      • Case solutions in 5U, 12U, 13U, or cube design
  • GE Intelligent Platforms, Inc.  (11)
    • AT922 ATCA Hub
      48 1000BASE-T ports in the ATCA 8U form factor; IPMI compliant according to PICMG 3.0 specification (+)

      Features:

      19049.jpg
      • Dual PMC slots compliant to PICMG 2.15 (dual GbE connected to the fabric)
      • Four 10/100/1000BASE-T copper and four 1000Base-T fiber ports to the front panel
      • Four 10/100/1000BASE-T copper ports to the rear I/O
    • ATCA-7820 CPU Blade
      AdvancedTCA single board computer with two dual-core Intel Xeon LV 2.0 GHz processors and flexible memory options (+)

      Features:

      32180.jpg
      • Utilizes two dual core Intel Xeon LV 2.0 GHz processors which provide four high-performance processor cores per platform
      • Provided with 2 MB of L2 cache, Up to 8 GB DDR-2 400 SDRAM with ECC
      • Support for a Serial ATA connection using the AdvancedMC site
    • Telum 1001-DE
      AMC.1 & PCI-e Rev 1.0 compliant (+)

      Features:

      22359.jpg
      • Full duplex DS3/E3 Interface
      • ATCA AMC Hot Swap compliant
      • Intelligent Platform Management Interface (IPMI)
    • Telum 1004-03
      AMC.1 & PCI-e Rev 1.0 compliant (+)

      Features:

      • 4 Port full duplex OC-3 Interface w/ optional
      • Automatic Protection Switching (APS)
      • 4MB local memory ; supports up to 16,000 VCCs
    • A10200
      The A10200 ATCA single board computer features dual Intel Xeon 5600/5500 Series quad- or six-core processors and up to 64 Gbytes of DDR3 SDRAM memory (+)

      Features:

      • Dual sockets support up to two Intel Xeon 5600/5500 Series long-life processors with Intel 5520 chipset
      • Intel L5638 and L5518 Xeon NEBS processors
      • Up to 8 DDR3-SDRAM VLP DIMMs
    • TELUM 1001-O3M
      An Advanced Mezzanine Card (AdvancedMC) for Asynchronous Transfer Mode (ATM) communications (+)

      Features:

      • Provides full-duplex OC-3 ATM front I/O capabilities to an AdvancedTCA system
      • Intel 41210 serial-to-parallel PCI bridge to the PCI Express bus to communicate with the host processor on an AdvancedTCA system
      • Complies with ATM Forum UNI 3.1 and TM 4.0 and is based on an advanced ATM segmentation and reassembly (SAR) controller designed to optimize the PCI Express bus interface
    • DS3/E3
      AMC.1 and PCIe Rev. 1.0 compliant (+)

      Features:

      • Full duplex DS3/E3 interface
      • AdvancedTCA AMC Hot Swap compliant
      • Intelligent Platform Management Interface (IPMI)
    • AT920
      A 24-port layer 2/3 AdvancedTCA switch (+)

      Features:

      16101.jpg
      • Carrier-grade switch
      • 16 ports compliant to PICMG 3.0
      • Up to eight Gigabit Ethernet I/O ports
    • TELUM 1001-DE DS3/E3 Wan Adapter AdvancedMC
      Full duplex DS3/E3 interface (+)

      Features:

      22476.jpg
      • AMC.1 & PCIe Rev 1.0 compliant
      • AdvancedTCA AdvancedMC hot swap compliant
      • Intelligent Platform Management Interface (IPMI)
    • AT-AMC2
      AdvancedTCA carrier for 2-4 AMC.2 modules (+)

      Features:

      30784.jpg
      • AMC.2 compliant AdvancedTCA carrier blade that is available with two double-wide or four (single-wide) bays
      • Support up to four extended full-height, single-width AdvancedMCs or up to two extended full-height, double-width AdvancedMCs
      • Serial fabric interface to each of the AT-AMC2's AdvancedMC slots complies with the AMC.2 Specification for the Common Options and Fat Pipes regions
    • AT2-5800
      IP Packet Processor AdvancedTCA blade (+)

      Features:

      35852.jpg
      • Dual Cavium OCTEON Plus 16-core CN5860-SCP processors with up to 750 MHz
      • SPI-4.2 interface for processor interconnection
      • Up to 8 GB of high-speed DDR2 packet memory per processor
  • Pigeon Point Systems  (10)
    • BMR-AVR-ATCA Board Management Reference Design
      A reference design for an AdvancedTCA IPM Controller based on the widely used Atmel AVR microcontrollers (+)

      Features:

      • Includes a schematic for the hardware and source code for the firmware
      • When integrated into a customer's AdvancedTCA board, these components form a compliant and interoperable IPM Controller
      • Tested for interoperability at PICMG-organized AdvancedTCA/AMC Interoperability Workshops
    • BMR-H8S-ATCA Board Management Reference Design
      A reference design for an AdvanceTCA IPM Controller based on the widely used Renesas H8S/2168 microcontrollers (+)

      Features:

      20054.jpg
      • Includes a schematic for the hardware and source code for the firmware. When integrated into a customer's AdvancedTCA board, these components form a compliant and interoperable IPM Controller
      • Tested for interoperability at PICMG-organized AdvancedTCA/AMC Interoperability Workshops
      • The reference design is purchased in a Board Management Starter Kit [...]
    • IPM Sentry ATCA Management Exerciser Board
      An AdvancedTCA form factor implementation of an AdvancedTCA IPM Controller. Suitable for bringup and testing of AdvancedTCA shelves (+)

      Features:

      • Provides broad visibility into the state of the IPM Controller, including the hardware address of its slot, temperature, and voltage measurements, hot swap state, E-Keying and power supply enable/disable state [...]
    • IPM Sentry BMR-AVR-ATCA Starter Kit
      All mandatory and many optional IPMI/ATCA commands supported over IPMB-0 (+)

      Features:

      • Numerous PPS extension commands, primarily used over the payload and debug serial interfaces
      • Serial interface protocol based on IPMI Terminal Mode
      • Payload alert notifications over payload interface for sensor events and receipt of reset/shutdown commands
    • BMR-AVR-AMCc AMC Carrier IPMC Ref Design
      One of a series of Pigeon Point Systems (PPS) Board Management Reference designs (+)

      Features:

      • This member of the series augments the BMR-AVR-ATCA IPM Controller to enable it to manage and represent Advanced Mezzanine Cards (AdvancedMCs) installed on an AdvancedTCA-based AdvancedMC carrier
      • This reference design is based on an AVR micro controller from Atmel [...]
    • BMR-A2F-ATCA, + ...
      Provides complete Microsemi SmartFusion-based solutions for the mandatory xTCA IPMCs, Carrier IPMCs and MMCs management subsystems on xTCA boards and modules (+)

      Features:

      • Comprehensive and class leading xTCA management controller functionality
      • Full schematics and FPGA design for management controller subsystem
      • Full source code of management controller firmware, including development tools
    • IPM Sentry Shelf Mn
      IPM Sentry Shelf Manager supporting AdvancedTCA Shelf Management Controller (ShMC) cross-connects (+)

      Features:

      • Hardware and software support for recent AdvancedTCA specification improvement that adds ShMC cross-connects
      • IPM Sentry Shelf Management Starter Kit provides the hardware and software support for new shelf
      • 333 MHz MIPS processor: the AMD Au1550-333
    • HPI to xTCA Mapping
      Two separate implementations of the Hardware Platform Interface (HPI) for use with the Pigeon Point Systems Shelf Manager (+)

      Features:

      • Cmpliant with the latest HPI-to-xTCA mapping specification
      • The Service Availability Forum (SA Forum) defines the specification
      • According to Pigeon Point Systems, using a common HPI mapping for managing AdvancedTCA platforms minimizes the development effort needed to support new platforms [...]
    • ShMM-300 Shelf Management Starter Kit
      Includes everything needed to build an AdvancedTCA or CompactPCI shelf manager , based on the ShMM-300 (+)

      Features:

      • Includes a schematic for a ShMM carrier board, ready for adaptation to the needs of your shelf
      • Bench top implementation of that schematic, along with a bench top IPM Controller Enables experimenting with AdvancedTCA or CompactPCI shelf management before any custom hardware is built
      • Bench top carrier comes with a ShMM-300 (containing the IPM Sentry Shelf Manager) already installed
    • ShMM-300
      Implements the hardware/software core of an AdvancedTCA shelf manager (with compatible support for CompactPCI as well) (+)

      Features:

      • SODIMM-sized ShMM-300 installed in a carrier board that is customized for a particular shelf architecture
      • The ShMM-300 and Pigeon Point's ShMM-500, provide the shelf manager core for most currently shipping AdvancedTCA shelves [...]
  • Oracle Corporation  (4)
    • Sun Netra CP3250 Intel Xeon L5408 ATCA Blade
      The Highest Performing x86-based Sun Netra ATCA Blade (+)

      Features:

      • Oracle's Sun Netra CP3250 ATCA blade server is Oracle's highest performing x86-based Sun Netra ATCA blade
      • Powered by dual-socket, Quad-Core Intel Xeon L5408 processors, it's designed to run the most demanding central office and telecom datacenter applications on the operating system of your choice: Oracle Solaris, Linux, or Windows
      • Key Applications
    • Netra CT900 Server
      Netra CT900 AdvancedTCA Blade Server (+)

      Features:

      30378.jpg
      • A 12U, 12 user node, AdvancedTCA blade server that supports both UltraSPARC IIIi and Opteron simultaneously and with a choice of Solaris or Carrier Grade Linux
      • PICMG 3.0 and 3.1 compliant
      • UltraSPARC and Opteron
    • Netra CP3220 Blade
      Sun Microsystem's AdvancedTCA Blade Server based on the AMD Opteron processor; runs on the Sun Netra CT900 Server (+)

      Features:

      35568.jpg
      • Carrier-grade availability and maximum density for next-gen datacenters
      • Single-socket, dual-core, quad-core-ready AMD Opteron processor
      • 10 GbE for breakthrough performance and lowered TCO
    • Netra CP3260 Blade
      Sun Microsystem's AdvancedTCA Blade Server based on UltraSPARC T2 processor - 64 threads and double the performance without changing the power and cooling requirements (+)

      Features:

      35569.jpg
      • Six-, or eight-core UltraSPARC T2 processors with eight threads per core
      • Chip Multithreading Technology (CMT) for massive throughput
      • Extreme compute density per shelf and rack within an eco-friendly footprint
  • Advanced Platforms Ltd.  (1)
    • WIC-400W-ATCA-Load
      AdvancedTCA 3.0 compliant boards with IPMC interfaces managing the power dissipation and the sensors through IPMI and PICMG 3.0 compatible interfaces (+)

      Features:

      • Main board has nine power dissipation elements
      • RTM is a tenth element
      • Each element is a managed FRU
  • NMS Communications Corporation  (2)
    • MG 7000A ATCA Media Processor
      480 IVR, fax, conferencing, VoIP, 3G 324M video sessions (+)

      Features:

      20393.jpg
      • 16 T1/E1 ports
      • Call control for CAS, ISDN, and SIP
      • Single slot AdvancedTCA solution
    • MG 7000A
      MG 7000A AdvancedTCA Media Processor Blade is the ideal platform for network-based applications including IP media servers and enhanced service platforms for mobile voice applications (+)

      Features:

      38655.jpg
      • High-speed IP packet handling
      • Dual Gigabit Ethernet for AdvancedTCA Switch Fabric
      • Dual 10/100/1000-Base-T Ethernet for AdvancedTCA Base Fabric
12/6/21 14:42
Close

Subscribe to AdvancedTCA updates