AdvancedTCA

Showing results for: long term evolution
Refine AdvancedTCA companies and products:
advancedtca 40 gbps advancedtca carrier blade advancedtca anniversary advancedtca specification picmg advancedtca 2011 advancedtca 40g xtca advancedtca architecture advancedtca 10 gbe advancedtca servers advancedtca blades long term evolution advancedtca all-ip advancedtca slots ipmi advancedtca advancedtca extensions advancedtca chassis advanced telecom computing architecture picmg advancedtca joe pavlat atca
Click on any vendor
to see a listing of
long term evolution related products.
  • u-blox  (1)
    • UBX-G6010-ST-TM
      u-blox announces the immediate availability of the UBX-G6010-ST-TM, a precision timing single-chip based on GPS technology with extreme acquisition sensitivity. It is designed for high-volume applications requiring low-cost precision timing with accuracy down to 15 nanoseconds such as femtocell basestations delivering 4G LTE (Long-Term Evolution), CDMA and WiMAX services. (+)

      Features:

      182876131184183131.jpg
      • .
      • .
      • .
  • Artesyn Embedded Technologies  (5)
    • ATCA-F140
      40G AdvancedTCA switch blade, the ATCA-F140 (+)

      Features:

      • The new 40G switch blade offers telecom equipment manufacturers a powerful combination of high bandwidth, high performance and maximum flexibility to help them drive the successful implementation of next-generation networks
      • The ATCA-F140 provides 1G, 10G and 40G fabric switching interfaces for backwards compatibility with a customer's existing payload blades, while enabling the maximum ATCA fabric bandwidth to meet the needs of the most data-intensive applications, including 4G Long Term Evolution (LTE) networks
      • The availability of a 40G switch blade is the next step in bringing the benefits of ATCA to more applications, especially those in the data plane
    • COMX-T Series COM Express Modules
      Artesyn Embedded Technologies' newly launched COM Express modules " COMX-T2081 and COMX-T1042 feature pin-compatible NXP® QorIQ T2081 and T1042 processors which provide superior performance and power ratings and bring a wide spectrum of high speed interfaces. They also enable cost-effective commercial off-the-shelf (COTS) solutions to serve a broad market where processing density, technology migration and long lifecycle takes priority. The COMX-T2081 and COMX-T1042 modules provide system developers with multiple performance levels to effectively address IoT and Industry 4.0 market opportunities. The implementation's flexibility makes the modules suitable for a range of applications including enterprise and service provider routers, switches, base-station controllers, radio network controllers, long-term evolution and general-purpose embedded computing systems in the networking, telecom, wireless infrastructure, industrial automation, aerospace, and military/defense markets. (+)

      Features:

      364974539251353766.jpg
      • NXP T2081 and T1042 high performance e6500/e5500 CPU cores
      • Soldered down 4G and 8G DDR3L ECC memories, up to 16GB optional
      • 10/100/1000 BASE-T, SATA, SGMII and PCIe interfaces to carrier board
    • FlowPilot ATCA Platform Software
      FlowPilot(TM) software for the ATCA-F140, the Emerson Network Power high performance, high bandwidth 40G ATCA hub blade, adds packet forwarding techniques beyond standard built-in switching and routing protocol support. FlowPilot allows you to manage the switching hardware to achieve lowest latency, full wire speed packet, and flow context aware packet distribution to and from all processing blades in your AdvancedTCA platform. (+)

      Features:

      231320965142302672.jpg
      • Balance traffic to multiple AdvancedTCA® blades for packet monitoring and processing
      • Maintain flow context and packet sequence
      • Fully transparent for external network elements
    • Centellis ATCA Systems
      Application-ready configurations shorten time-to-market (+)

      Features:

      315228397861166441.jpg
      • Strong ecosystem of off-the-shelf or custom blades allows the platform to be easily configured for a range of applications & upgraded as new technologies become available
      • Power & cooling up to 600 Watts per blade slot accommodates today’s technology with headroom for higher powered processors in the future
      • Integrated redundant switching of up to 40G to all slots in the backplane
    • ATCA® Systems & Blades
      Application-ready platform configurations shorten time-to-market (+)

      Features:

      333793677861302651.jpg
      • Long life embedded processors and switching architectures support long life military programs
      • Strong ecosystem of off-the-shelf or custom blades allows the Centellis platform to be easily configured for a range of applications & upgraded as new technologies become available
      • Wide range of processor architecture options (Intel® Xeon®, Cavium OCTEON; TI or Octasic DSPs [...]
  • Polaris Networks  (1)
    • LTE NetEPC
      NetEPC© combines the functions of the Evolved Packet Core (EPC) including the Mobile Management Entity (MME), the Serving Gateway (S-GW) and the Packet Data Network Gateway (PDN-GW) as per 3GPP standards and is well suited for deployment in commercial Long Term Evolution (LTE) networks. (+)

      Features:

      • combines the functions of the Evolved Packet Core (EPC)
      • highly scalable, integrated and cost-effective NetEPC© architecture
      • Polaris Networks NetEPC© can work in numerous scenarios including small-to-large local and regional networks
  • ADLINK Technology, Inc.  (2)
    • aTCA-N700 40G Ethernet AdvancedTCA® Packet Processing Blade
      The aTCA-N700 is a single slot AdvancedTCA® (ATCA) blade powered by dual OCTEON II multi-core processors for high performance packet processing applications such as IPTV, LTE wireless, security and many more areas. The blade provides up to 40Gbps full duplex packet processing performance with flexible network interfaces. The aTCA-N700 is designed to provide high performance security enabled intelligent deep packet inspection and processing functions that are required by high-end network appliances, security appliances, switches, and servers. The major building block is the Cavium CN6880 packet processor subsystem. FEATURES: Two Cavium OCTEON II CN6880 processors, each with 32 cnMIPS64 V2 cores processors Eight memory sockets support VLP DDR3-1600 REG/ECC up to 128 GB Onboard Ethernet switch BCM 56842 provides connectivity to RTM, OCTEON II processor and backplane (Fabric) with L2 and L3 switch management software Dual 1000BASE-T Fabric Interface channels Powerful Local Management Processor - Freescale QorIQ P2041, quad-core @ 1.2GHz Flexible RTM support on 12 x10G SFP+ ports (RTM-RN710) or 2x 40G QSFP+ and 4x 10G SFP+ (RTM2-RN720) Supports ADLINK Software for Networks (ADSN) [...] (+)

      Features:

    • MXE-3000
      The Matrix MXE-3000 series is the latest addition to the ADLINK's Matrix E series. It is based on the Intel® Atom™ D510 dual-core processor to offer greater computing power for your applications. The MXE-3000 series features an Intel® Atom™ D510 dual-core 1.66 GHz processor to boost its performance to almost twice that of the Atom™ N270 platform, while maintaining the same power consumption. This distinctive feature delivers to the ability to access multiple devices using a compact and rugged controller without the need for additional serial communication cards. Leveraging the design of the Matrix MXE-1000 series, the MXE-3000 series retains all the remarkable features of the Matrix E series, including rugged -20¢Xc to 70¢Xc* fanless operation, 5 Grms vibration resistance, and 9-32 VDC wide range power input. The design of serial ports is also flexible to meet the needs of a wide variety of applications. Two COM ports can be configured to RS-232, RS-422, or RS-485 via a BIOS setting. The MXE-3000 series is also equipped with a mini-PCIe socket, USIM socket, six USB 2.0 ports, and its fanless and cable-less structure gives you extensive durability for long-term usage. (+)

      Features:

      183914738701794017.jpg
      • Intel® Atomâ„¢ D510 1.66 GHz processor + Intel® ICH8-M chipset
      • Rugged, -20°c to 70°c fanless operation (w/industrial SSD)
      • Built-in 9 VDC to 32 VDC wide-range DC power input
  • CommAgility  (2)
    • AMC-6487C
      An Advanced Mezzanine Card offering signal processing performance and bandwidth in a highly compact package (+)

      Features:

      36120.jpg
      • First single-width, full-height AdvancedMC card to be based on Texas Instruments (TI) multicore TMS320TCI6487 DSP
      • Suitable for wireless baseband and other processing-intensive applications such as WiMAX and Long Term Evolution of 3GPP (LTE)
      • Three software programmable TCI6487 DSPs, each containing three high-performance C64x+ cores running at 1 GHz as well as 3 MB on-chip memory
    • AMC-2C87W3
      Complete Digital Baseband design (+)

      Features:

      44259.jpg
      • L1 PHY (physical layer) L2 RLC/MAC (Radio Link Control/Media Access Control), S1/X2 interface and security processing for LTE (Long Term Evolution) or WiMAX in the compact single width, full-size Advanced Mezzanine Card (AMC) form factor
      • For these advanced wireless applications, the new CommAgility AMC-2C87W3 integrates the PHY, RLC/MAC, transport (including all backhaul and air interface security) and antenna connectivity requirements of eNodeB into a compact solution, and provides end-to-end data handling from raw radio IQ data through to backhaul IP packets
      • The module incorporates the latest WinPath3 Network Processor from Wintegra, which provides a flexible means of handling the Real-time IP packet and security processing and L2 RLC/MAC demands of wireless base stations
  • National Semiconductor  (2)
    • LMX2541
      The LMX2541 is the industry's lowest-noise frequency synthesizer. It features a fully integrated, ultra-low-noise delta-sigma fractional-N PLL, VCO, divider and output driver (+)

      Features:

      • The PowerWise LMX2541 provides less than 2 milli-radians (mrad) root-mean-square (rms) noise at 2.1 GHz and 3.5 mrad rms noise at 3.5 GHz, outperforming the nearest competitor by 10 dB in both in-band phase-locked loop (PLL) noise and spurious performance
      • The LMX2541 is well-suited for local oscillator (LO) applications in next-generation basestation radio transceivers such as Long-Term Evolution (LTE), Worldwide Interoperability for Microwave Access (WiMAX), and multi-standard radios
      • When paired with the LMK04000 clock jitter cleaner, the LMX2541 significantly improves system error vector magnitude (EVM), resulting in enhanced receiver sensitivity and transmitter spectral purity
    • DS64EV400 Equalizer
      Compensates for transmission medium losses and reduces deterministic jitter for four data transmission channels (+)

      Features:

      • Provides 20 dB of boost to equalize up to 10 m of CAT5 cable, up to 40 inches of FR-4 printed circuit board (PCB) at data transmission rates up to 6.4 Gbps and up to 30 inches of FR-4 at data rates up to 10 Gbps -- with only 0.175 units interval (UI) of residual jitter at the equalizer output
      • Inactive channels can be automatically shutdown for further power savings of 85 percent per channel
      • Field-programmable gate arrays (FPGAs) and transmission media
  • Linear Technology Corporation  (1)
    • LT5578
      A wide bandwidth active upconverting mixer (+)

      Features:

      • Delivers high dynamic range performance from 400 MHz to 2.7 GHz, supporting all of the allocated Long-Term Evolution (LTE) broadband wireless services
      • At 900 MHz, the mixer offers 27 dBm output IP3 linearity and a best-in-class noise floor of -160.5 dBm/Hz at an output level of -5 dBm, enabling outstanding transmitter dynamic range
      • In addition, the mixer has 1.4 dB conversion gain with integrated RF balun transformers that provide a single-ended RF output and Local Oscillator (LO) input to simplify designs while reducing external component count
  • ITCN, Inc.  (8)
    • ST-101
      Simultaneous Real-Time Non-Intrusive (RTNI) monitoring of up to 4 fully loaded 1553 dual redundant busses per probe card (physical connection to 8 bus stubs) (+)

      Features:

      19512.jpg
      • Scalable with up to two probe cards per chassis (8 busses) and up to 32 chassis
      • Richly featured windows GUI for set-up and analysis of up to 32 SystemTrace modules of any type (VME, 1553, etc.)
      • Long-term data acquisition & storage via SystemTrace host module
    • SystemTrace STX-ETH
      A module that enables simultaneous data monitoring and recording of VME, 1553, and Ethernet (+)

      Features:

      32141.jpg
      • Real-Time Non Intrusive (RTNI) monitoring of up to 1 GbE data traffic
      • Scalable with up to two probe cards per chassis and up to 32 chassis on one instrumentation network
      • Integrates seamlessly with all other SystemTrace STX and Backplane Probe types
    • ST 201 VME Data Monitor
      Simultaneous real-time, non-intrusive monitoring of up to 32 VME chassis (+)

      Features:

      19236.jpg
      • Monitors A64, A40, A32, A24, A16; D32, D16, D08 (EO); MBLT, M32, BLT
      • Long-term data acquisition and storage (20GB per module)
      • Time-correlated data collection
    • ST-201 & ST-101
      Simultaneous, real-time, non-intrusive monitoring of up to 32 unique nodes (any combination of VME and/or 1553) (+)

      Features:

      21121.jpg
      • Richly featured Windows GUI for setup and analysis of 32 SystemTrace modules
      • Long-term data acquisition and storage via SystemTrace host module
      • Time-correlated data collection
    • SystemTrace ST-201 VME
      A VME data monitor and analyzer (+)

      Features:

      24823.jpg
      • Capable of monitoring and recording activity on all four VME backplane buses
      • Simultaneous real-time, nonintrusive monitoring of up to 32 VME chassis
      • Monitors A64, A40, A32, A24; D32, D16, D08 (EO); MBLT, M32, BLT
    • ST-101 VME Backplane and ST-101 1553 Databus Monitor/Analyzer
      A 1553 Databus Monitor/Analyzer (+)

      Features:

      • Simultaneous, real-time, nonintrusive monitoring of up to 32 unique nodes (any combination of VME and/or 1553)
      • Richly featured Windows GUI for setup and analysis of 32 SystemTrace modules
      • Long-term data acquisition and storage via SystemTrace host module
    • SystemTrace 1553
      A module capable of monitoring and recording activity on up to eight dual redundant MIL-STD-1553 buses (+)

      Features:

      25586.jpg
      • Simultaneous Real-Time Non Intrusive (RTNI) monitoring of up to four fully loaded 1553 dual redundant buses per probe card
      • Scalable with up to two probe cards per chassis (eight buses) and up to 32 chassis
      • Richly featured Windows GUI for setup and analysis of up to 32 SystemTrace modules of any type (VME, 1553, and Ethernet)
    • System Trace
      A system-wide view of operations correlated in time aids analysis (+)

      Features:

      • RTNI monitoring does not affect system operation during measurements, thereby giving accurate results
      • Supports the entire life-cycle of the instrumented embedded system, reducing instrumentation costs
      • Common GUI for dissimilar targets saves time and training investment Programmable data collection scenarios for user controlled parameters
  • Radisys Corporation  (3)
    • ATCA 10GbE System
      AdvancedTCA 10 GbE traffic management and security system delivers very high performance deep packet inspection capabilities to allow TEMs to rapidly develop and deploy content-aware platforms (+)

      Features:

      33077.jpg
      • -Deep Packet Inspection for Content-Aware Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Deep Packet Inspection: Multi-core, multi-threaded MIPS64 processor -Integrated 10 Gbps security acceleration engine
    • ATCA-PP50 Packet Processing Blade
      AdvancedTCA blade supporting two multi-core RMI XLR732 packet processors (+)

      Features:

      33080.jpg
      • Delivers deep packet inspection and security capabilities for wireless aggregators, IPTV, IMS, and security
      • Two XLR732 processors, each with 8 multi-threaded MIPS cores
      • Up to 16 GB per blade, 8 GB per XLR
    • 10 GbE ATCA Traffic Management System
      Deep packet inspection for content-aware infrastructure (+)

      Features:

      34178.jpg
      • Multicore, multithreaded MIPS64 processor
      • Integrated 10 Gbps security acceleration engine
      • Packet inspection and distribution engine
  • Innovative Integration  (1)
    • ePC-nano Rugged Embedded Computer 5.9" x 3" XMC IO
      The ePC-nano – a user-customizable, turnkey computer with full Windows/ Linux PC functionality to provide autonomous operation of a huge assortment of FPGA-accelerated, analog I/O-equipped XMC modules. The ePC-nano is a conduction-cooled solution, engineered to ruggedization level 3, for use in vehicles or other mobile applications. Distributed Data Acquisition: Put the ePC-nano at the data source and reduce system errors and complexity. Limitless flexibility – embellish FPGA signal processing or swap XMC module to alter functionality. XMC site for I/O, userprogrammable FPGA for real-time DSP, ethernet for WAN system connectivity, dual mSATA for long-duration data logging/signal playback, GPS/IEEE-1588 supporting synchronous operation over large distances, USB ports to allow connectivity to ubiquitous peripheral devices. Remote or Local Operation: Continuous data streaming up to 500 MB/s (local SSDs) or 1 Gb/s Ethernet. A dual, 10 GbE expansion module will be available soon. Rugged: Boots OS from embedded 16 GB eMMC drive in a compact, rugged 150x75mm footprint that is ready for deeply embedded operation in a rugged environment. Perfect for portable or automotive battery operated RF data loggers, beam steering, LIDAR/RADAR or waveform synthesis applications powered via a 6-14V DC supply [...] (+)

      Features:

      333882733491719056.jpg
  • Schaffner EMC  (2)
    • ECOsine Filters
      Filter topology and advanced temperature management result in high performance filters in a compact, lightweight, and contemporary package (+)

      Features:

      • Efficient mitigation of harmonic currents
      • Compliance with IEEE 519 and other power quality standards
      • Increased equipment service life and system reliability in mission-critical applications
    • ECOsine™
      High performance filters in a surprisingly compact, lightweight and contemporary package (+)

      Features:

      • Industry standard for AC and DC drives
      • Harmonic current mitigation to ≤5% THID
      • Compliance with IEEE-519:1992
  • TEWS Technologies LLC  (4)
    • TPMC630
      TEWS TECHNOLOGIES announced the introduction of the TPMC630, a low cost user-programmable FPGA-based PMC module with 300,000 system gates (+)

      Features:

      30113.jpg
      • Designed for industrial, military/aerospace, and transportation applications, where specialized I/O or long-term availability is required, the TPMC630 provides a number of advantages including a customizable interface for unique customer requirements and a FPGA-based design for product life cycle management issues
      • User configurable Xilinx FPGA
      • Flash device in-system programmable
    • TPMC632
      The TPMC632, a PMC module providing a user configurable XC6SLX45T-2 or XC6SLX100T-2 Spartan-6 FPGA. Designed for industrial, COTS, and transportation applications, where specialized I/O or long-term availability is required, the TPMC632 provides a number of advantages including a customizable interface for unique customer applications and a FPGA-based design for long-term product lifecycle management. (+)

      Features:

      198832880642773553.jpg
      • Standard single-width 32 bit PMC module conforming to IEEE P1386.1; PCI 2.1 compliant interface
      • 3.3V and 5V PCI Signaling Voltage
      • Xilinx XC6SLX45T-2 Spartan6 FPGA configured by serial Flash XCF16PFS or XC6SLX100T-2 configured by serial Flash XCF32PFS
    • TAMC640
      The TAMC640 is designed for industrial, COTS, and transportation applications, where specialized I/O or long-term availability is required (+)

      Features:

      • Single Mid-Size/Full-Size AMC.0 compliant module with user-programmable Xilinx Virtex-5 FPGA (module versions available: LXT or SXT)
      • One QDR-II SRAM bank; Two DDR2 SDRAM banks
      • IPMI Support
    • TAMC651
      The standard single Mid-Size or Full-Size AMC.1 module conforming to MTCA.4 (Micro TCA Enhancements for Rear I/O and Precision Timing) with a user-programmable XC6SLX45T-2 or XC6SLX100T-2 Spartan-6 FPGA is designed for industrial, COTS, and transportation applications, where specialized I/O or long-term availability is required. The TAMC651 provides a number of advantages including a customizable interface for unique applications and a FPGA-based design to extend product lifecycle. (+)

      Features:

      183620482311620914.jpg
      • Double Mid-Size/Full-Size AMC.1 Type 1 compliant module with Xilinx Spartan-6 FPGA
      • AMC Fabric Interface x1 PCI-Express
      • MLVDS transceiver for AMC ports 12-15 (point-to-point) and ports 17-20 (multi-point)
  • LeCroy Corporation  (1)
    • FCTracer 4G
      Two parallel event sequencers with 256 states, each with independent trigger and filter criteria (+)

      Features:

      • Two or four 1, 2, and 4 Gbps FC ports
      • Link tracker trace display
      • Hardware Filtering
  • Standard Microsystems Corporation  (1)
    • COM20022
      A 10-Mbytes/sec ARCNET (ANSI 878.1) controller with 2K x 8 onboard RAM (+)

      Features:

      • Selectable 8/16-bit wide bus with data swapper
      • Programmable DMA channel
      • Programmable reconfiguration times
  • Siborg Systems  (2)
    • Smart Tweezers ST5S-BT
      Smart Tweezers handheld LCR- and ESR-meters are an efficient tool for testing and troubleshooting Surface Mount Technology. The ST5S-BT is a Bluetooth enabled model that can send data which can be saved or processed for later referral, or recorded as needed. The ST5S-BT can connect to software such as NI LabView. Smart Tweezers innovative tweezer-design is a time-saving alternative to using conventional testers with long wire leads. Smart Tweezers is able to automatically determine the type of component and best test ranges before measuring with high accuracy. (+)

      Features:

      340088555911860728.jpg
      • Bluetooth enabled for recording real-time measurements
      • Compatible with any communication software such as NI LabView or Tera Term, with possible Android, iOS and Windows connectivity in the future
      • More efficient work where measurement values must be recorded
    • Smart Tweezers ST5S-BT
      Smart Tweezers ST5S-BT are a Bluetooth enabled handheld, digital LCR-meter based on the popular Smart Tweezers ST-5S model. The Bluetooth capabilities allow users to record their measurement results in real time. The results can be recieved by NI LabView or other software such as the free Tera Term. The data is sent in a string of comma separated values that can be saved as needed. Smart Tweezers are a proven efficient tool for testing and troubleshooting surface mount technology that requires no set-up between measurements and has a high basic accuracy of 0.2%. (+)

      Features:

      340190169911177145.jpg
      • Fully automatic and manual LCR and ESR measurements
      • Basic accuracy of 0.2%
      • Gold-plated tweezers grasp components to a 0201 size; mounted or loose
  • VXI Technology, Inc.  (1)
    • EX1048 Precision Thermocouple Instrument
      VXI Technology, Inc. has recently introduced their EX1048 Precision Thermocouple Instrument, the latest addition to their data acquisition product family. Key design goals of modularity, computer independence, and open-platform functionality were achieved by leveraging the advantages of the emerging LXI (LAN Extensions for Instrumentation) Standard. The result is an innovative temperature measurement instrument packaged in a compact, standalone configuration. Sample rates of 1000 samples-per-channel are routed through independent signal conditioning paths with software selectable filters to provide the ultimate in flexibility and performance. Complete channel independence ensures data integrity regardless of sample speed or input overload conditions, and solid state signal scanning paths eliminate long-term maintenance costs associated with other implementations. The heart of any truly accurate thermocouple measurement system is the cold junction compensation (CJC) implementation, and emphasis on this key design parameter sets the EX1048 apart from the competition. Multiple precision thermistors are combined with a significant thermal mass and careful parts placement, to provide world class measurement performance. Internal end-to-end self-calibration also distinguishes the EX1048 by providing a means for simple and quick self-calibration, affording the user the convenience of performing this function as often as necessary. Measurement integrity is further enhanced through open thermocouple detection that provides a continual indication of individual channel status, both visually and programmatically. VXI Technology, Inc. headquartered in Irvine, California, is a global supplier of high-density modular test instruments and switching systems for both electrical and mechanical test applications. All solutions are based on open-platform, “computer independent” standards. For more information about these and other products, simply visit www.vxitech.com, or call 949-955-1894. (+)

      Features:

      • [...]
  • Catalyst Systems Corporation  (1)
    • Openmake 6.41
      Delivers life-cycle automation process combined with full scriptless builds (+)

      Features:

      • Comprehensive solution incorporates life-cycle activity process scheduling with scriptless build technology
      • Accelerated build performance includes enhanced concurrent ALM processing
      • Supports the short-term goal of centralizing life-cycle processes
  • TEWS TECHNOLOGIES GmbH  (1)
    • TPME633
      The TMPE633 a standard full PCI Express Mini Card with a user programmable Xilinx Spartan-6 LX25T FPGA is designed for industrial, COTS, and transportation applications, where specialized I/O or long-term availability is required. It provides a number of advantages including a customizable interface for unique customer applications and a FPGA-based design for long-term product lifecycle management. (+)

      Features:

      340070866821518473.jpg
      • All I/O lines are individually programmable as input or output
      • TTL I/O lines can be set to high, low, or tristate. Each TTL I/O line has a pull-resistor to a common programmable pull voltage that can be set so +3.3 V, +5 V and GND.
      • Differential I/O lines are terminated, RS-485 lines with 120 ohms, M-LVDS lines with 100 ohms.
  • GE Intelligent Platforms, Inc.  (4)
    • TELUM GPSTC
      GPS based clock AdvancedMC module (+)

      Features:

      • a GPS clock AdvancedMC that provides a highly stable 30.72 MHz clock output that is phase aligned to the Global Positioning System (GPS) derived 1 PPS input
      • provides extremely precise, highly reliable GPS clock synchronization for applications such as WiMAX base stations
      • Implements a temperature-compensated voltage-controlled crystal oscillator with a 30.72 MHz center frequency and a minimum Stratum 3 stability of 0.37 PPM
    • XCR14 6U CompactPCI® and XVR14 6U VME platforms
      Both the XCR14 and XVR 14 provide a choice of either dual- or quad-core 2nd Generation Intel Core i7 processors operating at up to 2.5GHz, offering a range of four performance/watt options, and up to 16GBytes of soldered DDR3 SDRAM with ECC (+)

      Features:

      47472.jpg
      • This, together with a sophisticated inbuilt graphics capability and Intel's AVX (Advanced Vector Extensions) technology, makes them ideal for challenging applications in industry and telecommunications and especially for defense and aerospace applications beyond command and control such as signal processing in intelligence/surveillance/ reconnaissance (ISR) and radar/sonar
      • Both single board computers benefit from GE's extensive ecosystem of CompactPCI and VME hardware and software, easing the development and integration of complete systems, as well as from GE's industry-leading experience in long term program support through its product lifecycle management (PLM) services [...]
    • A10200
      The A10200 ATCA single board computer features dual Intel Xeon 5600/5500 Series quad- or six-core processors and up to 64 Gbytes of DDR3 SDRAM memory (+)

      Features:

      • Dual sockets support up to two Intel Xeon 5600/5500 Series long-life processors with Intel 5520 chipset
      • Intel L5638 and L5518 Xeon NEBS processors
      • Up to 8 DDR3-SDRAM VLP DIMMs
    • A10200
      The A10200 AdvancedTCA single board computer features dual Intel Xeon 5600/5500 Series quad- or six-core processors and up to 64 Gbytes of DDR3 SDRAM memory (+)

      Features:

      • Dual sockets support up to two Intel Xeon 5600/5500 Series long-life processors with Intel 5520 chipset
      • Intel L5638 and L5518 Xeon NEBS processors
      • Up to 8 DDR3-SDRAM VLP DIMMs
  • Simpulse  (1)
    • PULSAR-B325x2 SDR Mobile video modem board
      Embedded SDR Modem board for very long-range and highly mobile video or data transmissions in Drones, UAVs, robots and M2M communications. The modem is highly flexible and ensures evolutive customer products, thanks to the integrated patented PULSAR DSP co-processor, a scalable and programmable hardware architecture. 2 FPGA versions are available for high (Ref. PULSAR-B325x2) and medium (Ref. PULSAR-B160x2) processing capabilities. Delivered as complete electronic circuit board. Adaptations can easily be made. Also available as IP block for FPGA or ASIC. (+)

      Features:

      330133827792391370.jpg
      • RF agility from 70 MHz to 6 GHz
      • Optimized Multi-carrier and Single-carrier waveforms
      • Multi-antenna processing: Rx diversity, options for Tx diversity and spatial multiplexing
  • RF Micro Devices  (1)
    • PowerSmart platforms
      Multiband front end for mobile devices (+)

      Features:

      44502.jpg
      • Wide range of mode coverage (GSM/GPRS, EDGE, EDGE Evolution, CDMA, TD-SCDMA, WCDMA/HSPA+, and LTE/4G)
      • Industry-leading band coverage (bands 1-6 and 8-10)
      • Standardized digital interface to connect to most transceivers
  • Avnet Electronics Marketing  (1)
    • ComputeNode
      Full family of 1U through 4U chassis, CompactPCI, and cPSB (PICMG 2.16) (+)

      Features:

      15569.jpg
      • Proven NEBS Level 3 compliant designs for high speed, high availability telecom and networking applications
      • Built-in Alert!Node alarm card for out-of-band chassis management
      • Redundant, hot-swappable AC or DC Power Supplies with Filters and Dual Feed option
  • Measurement Computing Corporation  (2)
    • USB-502-PLUS
      High-performance, battery-powered temperature/relative humidity logger (+)

      Features:

      42294.jpg
      • Suitable for both long- or short-term logging applications in which accuracy and small size are important
      • Measures and stores up to 16,382 relative humidity and 16,382 temperature readings over the 0 to 100% RH and -35 to +80 °C (-31 to +176 °F) measurement ranges in addition to calculating dew point
      • Flashing LEDs indicate logging status, and a user-replaceable long-life lithium battery is included, which can typically allow up to one full year of logging
    • USB-2001-TC
      A single-channel, 20-bit, thermocouple data acquisition device for measuring temperatures over the ranges defined by NIST J, K, R, S, T, N, E, and B thermocouple types (+)

      Features:

      43962.jpg
      • 250 ms conversion time
      • Features integrated cold junction compensation
      • Under the new DAQFlex framework, the USB-2001-TC is supported under both Windows and Linux operating systems and provides open thermocouple detection
  • Reynolds Industries Incorporated  (1)
    • Ceramic-to-metal seals
      A line of ceramic-to-metal seal hermetic devices (+)

      Features:

      • Seals provide ideal solutions where reliable electrical circuits must pass through containment walls and are subjected to high temperatures and pressures, with voltages up to 50KVA
      • Ceramic insulators provide rugged alternatives to glass seals
      • Provides long-term hermetic reliability, high-temperature operation, and resistance to radiation
  • Texas Instruments, Inc.  (2)
    • Family of Analog Front End (AFE) devices
      Low-cost (+)

      Features:

      47786.jpg
      • Portable
      • Widely available medical monitoring devices promise to transform the health care industry
      • Depends on component manufacturers and embedded designers that can compress multiple measurement strategies into a low-power, small form factor patient monitoring device
    • SimpleLink Sub-1 GHz CC1350 wireless MCU
      The CC1350 wireless MCU was the industry’s first dual-band solution in mass production, supporting Sub-1 GHz and Bluetooth Low Energy connectivity on a single chip. The ARM Cortex-M3-based device offers long-range connectivity up to 20 km paired with ultra-low power consumption of more than 10 years battery life. The CC1350 device, the first dual-band product in production, combines an RF transceiver with a 48 MHz ARM Cortex-M3 MCU. (+)

      Features:

      3684528878612514067.jpg
      • A dedicated radio controller handles low-level RF protocol commands, ensuring ultra-low power & ability to support both Sub-1 GHz (up to 20 km) and BLE protocols. [...]
  • Cinch Connectors, Inc.  (1)
    • AMC compression style mezzanine connector
      Robust compression style mezzanine connector for standard AdvancedTCA platform blades (+)

      Features:

      39494.jpg
      • Meets or exceeds the latest PICMG AdvancedTCA specification, AMC.0 Rev 2, which requires support for data transmissions of up to 12.5 Gbps per channel
      • Highly reliable one-piece stamped contacts, providing seamless carrier board to mezzanine card paths for long-term robust performance
      • The captured individual contacts are designed to provide a low insertion force, with support for wide board planarities and multiple card insertions
  • Symmetricom Inc.  (1)
    • XL-GPS Time and Frequency Receiver
      Accurate to within 30 nanoseconds RMS UTC(USNO) (+)

      Features:

      22506.jpg
      • Frequency stability better than 1x10-12 (long term)
      • High performance 12 channel GPS receiver with TRAIM (Time Receiver Autonomous Integrity Monitoring) to protect against faulty satellite signals.
      • IRIG B time code output
  • Fischer Technology, Inc.  (1)
    • Fischerscope XDLM
      The XDLM spectrometers with micro focus tube and proportional counter tube are ideally suited for the inspection of parts where small structures are measured (+)

      Features:

      • Energy dispersive x-ray fluorescence spectrometer (EDXRF) to determine thin coatings, small structures, trace elements and alloys
      • Equipped with four exchangeable apertures and a programmable XY(Z) measuring stage
      • This makes them ideally suited for testing mass-produced parts
  • Trenton Technology Inc.  (1)
    • MIL-STD-810
      Introducing Trenton's new line of MIL-STD-810 certified military computers that incorporate our noted board-level dependability legacy into rugged system solutions geared toward military requirements (+)

      Features:

      47439.jpg
      • These Trenton MIL-STD-810 computers are now available for deployment in applications requiring performance, space-savings, flexibility and long-term system configuration stability
      • Military computers featuring the dual-processor JXM7031 MicroATX embedded motherboard and the JXT6966 single board computer; paired with a variety of PCI Express backplane options, are designed to operate in diverse military computer applications such as UAV ground control stations, missile telemetry and command & control systems. [...]
  • Creative Electronic Systems  (1)
    • ROCK-4
      ROCK-4 acquires, filters, converts, formats and processes digital/analog signals and provides them to a Mission Computer over classical avionic interfaces. ROCK-4 addresses the needs for small and rugged standalone health moni-toring computers, in order to interface sensors or concentrate data in I/O distributed systems. With its customizable front panel, ROCK-4 is easily adaptable to the specific needs of your solution. Designed and manufactured in-house at CES, ROCK-4 benefits from long term serviceability, proactive obsolescence management, tight control of all production steps and rigorous quality testing. (+)

      Features:

      292161863861709780.jpg
      • Acquires, filters, converts, formats and processes digital/analog signals to exchange them as digital data
      • With its customizable front panel, it is easily adaptable
      • Designed and manufactured in-house at CES [...]
  • Condor Engineering  (1)
    • P-708
      Two-channel ARINC 708 wather rader databus PMC module interface (+)

      Features:

      • Simultaneously supports two ARINC 708 channels
      • Each P-708 channel operates as an independent transmitter or receiver with programmable frame size and buffer storage capacity
      • Frame time-tagging and error detection/notification of short/long frames
  • MEN Micro Elektronik GmbH  (2)
    • CAN Bus Interface
      MEN Micro Inc. now offers the new Quad CAN Bus Interface PCI mezzanine card (PMC) that provides four controller area network (CAN) interface channels on a single card (+)

      Features:

      42965.jpg
      • Each interface provides a programmable loop-back mode for self-test operation as well as signaling and interrupt capabilities for receiver and transmitter error states
      • The P506's interfaces are executed via IP cores within an onboard FPGA (field-programmable gate array)
      • Corresponding line drivers are implemented on a specialized USM (Universal Submodule) module that plugs directly onto the PMC board
    • M74
      A CANbus interface M-Module based on the SJA1000 (+)

      Features:

      • Two CANbus controllers
      • All channels are optically isolated from the system and from each other
      • Supports network configurations that require low speed over long distances
  • Qorvo  (1)
    • ZigBee Green Power chips
      The GreenPeak Technologies GP711 System-on-Chip is an IEEE 802.15.4 communications controller for integration into a ZigBee RF4CE [1], ZigBee PRO or ZigBee IP node. It supports dual PAN operation with two protocol stacks in the host processor, and provides a high-speed serial interface to the host processor. The GP711 is fully compliant with the IEEE 802.15.4 standard, providing robust spread spectrum data communication with a highly secure encrypted data flow. (+)

      Features:

      347870803861898286.jpg
      •  Ultra low cost PCB design, requiring no shielding, chip antennas or voltage regulators
      •  IEEE 802.15.4 compliant
      • Multi Stack / Dual PAN Support with RF4CE Duty Cycling and packet filtering through Deep Packet Inspection
  • IEI Technology USA Corp.  (1)
    • ROCKY-6610,P4/CeleD
      An industrial SiS661CX based-Socket 478 Intel Pentium 4 platform with long-term support (+)

      Features:

      • PICMG 1.0 Socket 478 Intel Pentium 4/Celeron D CPU card with VGA, dual GbE, and SATA RAID function support
      • CPU; Intel Pentium 4 Socket 478 Prescott/Celeron-D CPU support 800/533 MHz FSB up to 3.4 GHz with hyper-threading technology
      • System chipset: SiS 661CX + SiS 964
  • Kontron  (3)
    • KISS 1U Short
      Kontron's new 1U mini-format industrial server range Kontron KISS 1U Short feature a 25 percent reduced installation depth (+)

      Features:

      42565.jpg
      • They offer the latest multicore processor performance, two SATA hard disks with optional RAID functionality and two PCI expansion slots for customer-specific expansion options
      • Installation height of 44 mm and are just 350 mm in depth, leaving enough space in the back of the rack for installing cables and dock-on devices
      • The most important electronic components, such as the embedded motherboard and the RAID controller are engineered and manufactured by Kontron, ensuring optimized system performance and reliability
    • INTERPARLO
      Configurable 3U CompactPCI platform for WiFi and passenger infotainment (+)

      Features:

      47765.jpg
      • 19-inch rack format specifically designed for railroad applications
      • EN50155-compliant Internet-on-train-server with long-term availability can be configured for specific applications with Kontron's rail-compliant embedded CompactPCI modules
      • Available, pre-validated, pre-tested and configured in order to meet individual application needs
    • VX3324 - 3U VPX Graphics Board
      Kontron’s new 3U VPX graphics board provides desktop-class AMD graphics in a rugged form factor for long-lifecycle applications. Recently introduced, the Kontron VX3324 3U VPX GPU Board offers high-end graphics capabilities provided by the AMD Radeon E6460 graphics processing unit. The Kontron VX3324 comes in an embedded form factor and targets military and aerospace applications such as command and control workstations, radar consoles, and cockpit displays. Optimized for size, weight, power and cooling (SWAP-C) constrained applications, along with long-lifecycle, the Kontron VX3324 supports latest high-end graphics performance features such as DirectX 11 OpenGL 4.0 and Shader model 5.0. This provides an immersive 3D user experience, plus reduces the bill of material in multi-monitor environments with its support of up to three independent high-resolution monitors. Now shipping, it can be ordered as a stand-alone solution or integrated into Kontron’s rugged Multi-mission ApexVX computer system. FEATURES: » ATi Radeon e6460 Silicon » Modular design: MXM 3.0 mezzanine » High-end graphics GPU » Three independent Displays: one VGA and two DP » Air-cooled and rugged conduction-cooled versions [...] (+)

      Features:

06/27/22 06:01
Close

Subscribe to AdvancedTCA updates