AdvancedTCA

Showing results for: picmg
Refine AdvancedTCA companies and products:
advancedtca 40 gbps advancedtca carrier blade advancedtca anniversary advancedtca specification picmg advancedtca 2011 advancedtca 40g xtca advancedtca architecture advancedtca 10 gbe advancedtca servers advancedtca blades long term evolution advancedtca all-ip advancedtca slots ipmi advancedtca advancedtca extensions advancedtca chassis advanced telecom computing architecture picmg advancedtca joe pavlat atca
Click on any vendor
to see a listing of
picmg related products.
  • Extreme Engineering Solutions (X-ES)  (10)
    • XChange1002
      Dual PrPMC Carrier Card with PICMG 2.16 Switched Ethernet (+)

      Features:

      • 100-MHz PCI-X and Local Bus Interfaces
      • Hot Swap Support
      • Two 10/100/1000 Mbs PICMG 2.16 Backplane Ethernet Ports
    • XChange1004
      Dual PrPMC CompactPCI Carrier Card with PICMG 2.16 Switched Ethernet (+)

      Features:

      • 100 MHz PCI-X CompactPCI and Local Bus Interfaces
      • Autosense System / Peripheral Slot
      • Hot Swap Support
    • XChange1104
      PowerPC 440GX 533 800 MHz processor (+)

      Features:

      22466.jpg
      • 133 MHz PCI-X CompactPCI and Local Bus interfaces
      • Autosense system / peripheral slot
      • Up to 1 GB 333 MHz DDR SDRAM
    • XIt2020
      PIM module (+)

      Features:

      22508.jpg
      • Two RJ-45 PICMG 2.16 10/100/1000 Mbps Ethernet ports
      • One RJ-45/RS232/RS422 serial port [...]
    • XPort1020
      MPC8270 at up to 450 MHz with integrated PCI (+)

      Features:

      • Twelve SCCs support a broad range of serial protocols
      • Autosense system/Peripheral slot
      • Hot swap support
    • XCalibur1200
      6U CompactPCI Single Board Computer (+)

      Features:

      22444.jpg
      • Single / dual Motorola MPC7447A PowerPC Processors
      • Dual PCI-X PrPMC Ssots
      • Up to 2 GB SO-IMM 266 MHz DDR SDRAM
    • XChange1102
      6U ruggedized CompactPCI Intelligent Carrier Card (+)

      Features:

      22446.jpg
      • AMCC 440GX PowerPC Processor
      • Dual PCI-X PrPMC slots
      • Ruggedized module, extended temperature (-40 ºC to +85 ºC )
    • XCalibur1002
      The XCalibur1002 is a 6U CompactPCI single-board computer with a PICMG 2.16 Gigabit Ethernet backplane interface and a 1.0 GHz IBM PowerPC 750GX Processor. The XCalibur1002 is well-suited for telecom, industrial, and general computing applications. The XCalibur1002 provides a highly-configurable processing platform. Its DDR-400 SDRAM provides up to 1 GB of local memory. An optional CompactFlash interface accepts up to 1 GB of non-volatile memory. Two PCI-X PrPMC slots are available for high bandwidth I/O. (+)

      Features:

      209658143022834261.jpg
      • IBM 750 GX PowerPC 1.0 GHz processor
      • Dual PCI-X PrPMC slots
      • Autosense system/peripheral slot
    • XIt1003
      6U transition module (+)

      Features:

      • Supports breakout of 2 PICMG 2.16 10/100/1000 Mbps Ethernet ports
      • Supports two PIM (PMC I/O Module) interfaces to route PMC I/O out the rear panel
      • One RS-232 RJ-45 interface [...]
    • XIt1000
      6U transition module (+)

      Features:

      • Supports breakout of 2 PICMG 2.16 10/100/1000 Mbps Ethernet ports
      • 40-pin IDE connector
      • 44-pin Laptop IDE connector
  • Infranet  (10)
    • PICMG 2.16 Switch Fabric - USPS
      PICMG 2.16 compliant switch fabric (+)

      Features:

      • 24 FE and 2 Gigabit Ethernet ports L2/L3
      • Web based Management SNMP [...]
    • UniPlat-2000 : PICMG system platform
      PICMG 2.16 compliant system platform (+)

      Features:

      21286.jpg
      • Chassis
      • Backplane
      • Power module backplane
    • USPS-2000 : PICMG Ethernet Switch Card
      PICMG 2.16 compliant switch fabric card (+)

      Features:

      21281.jpg
      • 24 Fast Ethernet and 2 Gigabit Ethernet ports
      • Layer 2 and optionally Layer 3 function
      • Remote S/W upgrade
    • USPB-2000 : PICMG Backplane
      PICMG 2.16 compliant backplane (+)

      Features:

      21284.jpg
      • 21-slot, 2 slots for switch fabric, 1 slot for CMM
      • Accommodates 1+1 3U size CMM [...]
    • USPC-2000 : PICMG SBC
      PICMG 2.16 compliant SBC (+)

      Features:

      21283.jpg
      • Intel Pentium 4-M based CPU card
      • 2 Gigabit Ethernet ports for switch interface
      • 1 FE port for management
    • USPS-3200 Series
      AdvancedTCA 3.0 and 3.1 option 2 compliant switch blade (+)

      Features:

      35822.jpg
      • 48 GbE service for interfacing with node boards via Base Interface and Fabric Interface
      • Compliant with PICMG 3.1 option 2 and USPS-3200-9 option 9, each of which enables user to excel in demanding and diverse systems
      • USPS-3000 series: USPS-3000B designed for Base Interface only and USPS-3000F supporting Fabric Interface
    • USPS-2000 PICMG 2.16 Switch Fabric
      24 FE + 2 GE L2/L3 CompactPCI form factor switch fabric (+)

      Features:

      21925.jpg
      • Full duplex, Full wired speed Layer 2 switching
      • 9 GBps switching capability
      • 8K MAC addresses
    • USPS-3200
      Fully AdvancedTCA 3.0 and 3.1 option 2 compliant switch blade (+)

      Features:

      32134.jpg
      • Optionally support option 9 for 2 specific slots
      • Fully PICMG 3.0/3.1 option 2 compliant switch fabric
      • Support partially PICMG 3.1 option 9 (10 GbE) for specific 2 node slots optionally
    • UniPlat-3005RM
      Fully PICMG 3.0 compliant AdvancedTCA Shelf (+)

      Features:

      32132.jpg
      • 5U height, 5 slots
      • Support replicated mesh midplane
      • One fan tray with redundancy fans
    • USPS-3000 : ATCA switch fabric
      AdvancedTCA compliant switch fabric (+)

      Features:

      21288.jpg
      • PICMG 3.0 and 3.1 compliant
      • Base I/F: 24 Gigabit Ethernet ports
      • Fabric I/F: 24 Gigabit Ethernet ports [...]
  • Vector Electronics & Technology, Inc.  (4)
    • 2377, PICMG 2.16, PICMG 2.0, Rev.3
      Low profile 19" rack mount enclosure (+)

      Features:

      • 8-slot backplane PICMG 2.16 or PICMG 2.0, R3
      • Front 160mm & 80mm rear I/O card insertion
      • EMI/RFI shielded
    • CPCIBP8-6
      A CompactPCI backplane for 6U cards (+)

      Features:

      • Available with four to eight slots
      • Compliant with PICMG 2.0 R3.0 and hot swap specification PICMG 2.1 R1.0
      • Supports 32 or 64-bit operation, and 33 or 66-MHz operation (4-slot only)
    • CPCIBP8-3
      An 8-slot CompactPCI backplane with versions for 3U or 6U cards (+)

      Features:

      • Compliant with PICMG 2.0 R3.0
      • PICMG 2.1 R1.0 hot swap compliance
      • V(I/O) switchable from +5V to +3.3V
    • cPCI Chassis/Enclosures for 3U and 6U Cards
      1U to 9U (+)

      Features:

      21565.jpg
      • PICMG 2.0, REV.3 or 2.16
      • Up to 8 horizontal or vertical slots
      • Dual redundant hot swappable 200 W power supply option
  • ELMA Electronic  (15 of 49)
    • 69-SF617-0157
      A PICMG 2.17-compliant backplane (+)

      Features:

      • [...]
    • 2-Slot cPCI
      2-slot CompactPCI backplane (+)

      Features:

      32313.jpg
      • Conforms to PICMG basic specification 2.0 R3.0
      • PICMG Hot Swap specification 2.1 R1.0
      • Versions conforming to PICMG 2.16 are available
    • EasyCable CompactPCI Backplanes
      Conforms to PICMG basic specification 2.0 R3.0 (+)

      Features:

      19648.jpg
      • PICMG Hot Swap specification 2.1 R1.0
      • Versions conforming to PICMG H.110 Computer Telephony specification 2.5 R1.0
      • 8-layer and 12- layer controlled impedance stripline design
    • Packet Switching Backplane PICMG 2.16
      A PICMG 2.16 packet-switching backplane (+)

      Features:

      • Compliant with PICMG 2.16 R1.0
      • 21 slots with system slot left
      • Two redundant standard fabric slots (right)
    • PXI Backplane
      3U, 8-slot PXI Backplane (+)

      Features:

      • Compliant to PICMG 2.0 R3.0 CPCI Core Specification and PICMG PXI SA R2.1
      • Connector for status signals "FCON" and Fastons for supplying HDD and fans
      • PICMG 2.1 R2.0 Hot Swap Specification and PICMG 2.9 R1.0 System Management Specification
    • Low Profile CompactPCI Backplanes
      Conforms to PICMG basic specification 2.0 R3.0 (+)

      Features:

      20065.jpg
      • PICMG Hot Swap specification 2.1 R1.0
      • Versions conforming to PICMG 2.16 are available
      • Versions conforming to PICMG 2.5 R1.0 for Computer Telephony are available
    • 3U cPCI Backplanes
      Conforms to PICMG basic specification 2.0 R3.0 (+)

      Features:

      31631.jpg
      • PICMG Hot Swap specification 2.1 R1.0
      • H.110 versions conform to PICMG H.110 Computer Telephony specification 2.5 R1.0
      • Controlled impedance stripline design
    • cPCI: PICMG 2.16 Backplane
      6U height (+)

      Features:

      • Four, six, and eight slot sizes standard
      • Ethernet and CompactPCI compatible
      • 10-layer board
    • PICMG 2.16-Compliant Backplanes
      A line of CPSB (Compact Packet Switching) backplanes (+)

      Features:

      • Conforms to PICMG 2.16 specification
      • Conforms to PICMG basic specification 2.0 R3.0
      • Moves data via switched Ethernet fabric (10/100/1000 Mbit/sec)
    • PICMG 2.17 chassis
      A line of PICMG 2.17-compliant StarFabric chassis (+)

      Features:

      • Versions in horizontal and vertical configurations with various heights
      • 4-, 6-, 8-, and 17-slot backplanes available
      • Line has units from 2U to 12U
    • RoHS Compliant CompactPCI
      RoHS compliant CompactPCI backplanes (+)

      Features:

      31461.jpg
      • The RoHS backplanes are compliant to the PICMG basic specification 2.0 R3.0 and PICMG Hot Swap specification 2.1 R1.0
      • Versions conforming to PICMG 2.16 for Compact Packet Switching and the H.110 Computer Telephony specification 2.5 R1.0
      • 8-12 layer controlled impedance stripline design, superior power distribution, and have virtually zero crosstalk
    • PICMG-based Backplanes
      Backplanes compliant to the PICMG 2.0 (CompactPCI), 2.16 (Ethernet Packet Switching, cPSB), 3.0 (AdvancedTCA), and MicroTCA.0 specifications (+)

      Features:

      330585.jpg
      • Bustronic is the industry leader in PICMG-based backplanes and offers the widest standard selection
      • Our custom backplane expertise in these architectures is second-to-none
      • We also offer the largest selection of PICMG-based system accessories, including load boards, extender cards, air baffles, RTMs, and SerDes test modules. Bustronic's signal integrity studies help ensure the performance of your high-speed backplane design
    • PICMG 3.x Custom Backplane
      Based on PICMG 3.x draft specification (+)

      Features:

      • 26-layer structure F4
      • 430 x 440mm, 6.05mm thickness
      • 1.6” pitch, except slot 1 and 7 (2.0”)
    • 14-slot Dual Star ATCA
      Compliant to PICMG 3.0 Rev. 1.0 specification (+)

      Features:

      18372.jpg
      • Dual Star, dual-dual star, and mesh configurations available Gigabyte/Terabyte per second bandwidth per shelf
      • 14-slot dual star version: 12 layer controlled impedance stripline design 14 slots: 2 Fabric slots, 12 node slots
      • Headers for cabling and two 2 mm HM
    • PICMG 2.17 Development System
      A PICMG 2.17 development platform (+)

      Features:

      12190.jpg
      • 9U, 84HP
      • Allows the user to test the implementation of the StarFabric switched fabric across a 17-slot PICMG 2.17-compliant backplane along with standard cards using the CompactPCI bus and/or the H.110 bus
      • Allows high-availability (HA) testing
  • Radisys Corporation  (15 of 16)
    • CP50
      A modular 9U CompactPCI PICMG 2.16-compliant platform for 19-inch racks (+)

      Features:

      11897.jpg
      • Switched-fabric backplane
      • Integrated IPMI management
      • High availability
    • ESM-3100
      A combination switched-fabric switch and system IPMI manager for CompactPCI (+)

      Features:

      11898.jpg
      • PICMG 2.16-compliant
      • Integrates Fast Ethernet switch with Gigabit uplinks and IPMI management
      • Supports 24 ports of fast Ethernet Layer 2 switching with Layer 3 extensions along with 4 Gigabit Ethernet uplinks [...]
    • ENP-3511
      A CompactPCI packet processor incorporating an Intel IXP1200 processor (+)

      Features:

      11899.jpg
      • 6U, single-slot
      • For TDM-to-packet or packet-to-packet processing applications
      • PICMG 2.16-compliant
    • EPC-3412
      A PICMG 2.16-compliant CPU blade (+)

      Features:

      16739.jpg
      • Full PICMG 2.16 and 2.9 compliance
      • 1.2 GHz Mobile Intel Pentium 4 Processor-M
      • Intel 845E with ICH4 chipset
    • 10 GbE ATCA Traffic Management System
      Deep packet inspection for content-aware infrastructure (+)

      Features:

      34178.jpg
      • Multicore, multithreaded MIPS64 processor
      • Integrated 10 Gbps security acceleration engine
      • Packet inspection and distribution engine
    • Promentum ATCA-2100
      Single slot AdvancedTCA PICMG 3.0/3.1 compliant module (+)

      Features:

      19739.jpg
      • Highly integrated fabric module: GbE base interface, Fibre Channel fabric, shelf manager, two PMC sites
      • 28-port GbE PICMG 3.0 Base fabric switch: 14 GbE links to user slots, 1 GbE link to redundant switch blade, 8 GbE links for external connections (uplinks), 4 GbE links to onboard 2 PMC sites, 1 GbE link to off-board shelf manager
      • Wire-speed L2 and L3 switching: support for 4K IEEE 802.1Q VLANs, packet classification/filtering, link aggregation, QoS, CLI, and SNMP management
    • EPC-2325
      PCI/ISA PICMG card with dual 10/100 Ethernet (+)

      Features:

      33898.jpg
      • 370-pin PGA socket for Intel Celeron and Pentium III processors in FC-PGA and FC-PGA2 packages
      • Intel 815 GMCH and C-ICH chipset
      • Up to 512 MB SDRAM
    • Promentum ATCA-3000
      Single slot AdvancedTCA PICMG 3.0/3.1 compliant Fibre Channel disk storage module (+)

      Features:

      19738.jpg
      • Fully managed Fibre Channel storage module supporting module level hot swap
      • Single 3.5" disk drive site carrying 300 GB high performance, high reliability SCSI drive
      • Supports 1 Gbps or 2 Gbps Fibre Channel addressable through IPMI
    • Promentum ATCA-7010
      AdvancedTCA packet processing module (+)

      Features:

      20877.jpg
      • Dual Intel IXP28xx network processors with 1.4 GHz core and 700 MHz Xscale
      • Can be configured as single, or dual, parallel, or pipelined
      • 10 Gbps packet processing is made possible with 10, one Gigabit Ethernet interfaces that connect via a Rear Transition Module (RTM)
    • PROMENTUM SYS-6010
      Application ready platform to address next generation requirements for RNC/BSC, Media Gateways, IMS, and IPTV infrastructure (+)

      Features:

      32894.jpg
      • Switched 10 Gigabit Ethernet (fabric) and Switched Ethernet (Base)
      • 24 Gigabit Ethernet ports for Base and 20 10 Gigabit Ethernet Ports for Fabric
      • 4 Gigabit Ethernet ports for Base and 4 10 Gigabit Ethernet for Fabric
    • ENP-3504
      A dual OC-3C/STM-1 ATM-to-IP RNC gateway line test and monitoring card (+)

      Features:

      15844.jpg
      • Intel 200-MHz IXP1240 network processor
      • UTOPIA-to-Packet bridge
      • Eight 10/100BASE-T Ethernet ports on the IX bus with I/O on an RTM
    • ATCA 10GbE System
      AdvancedTCA 10 GbE traffic management and security system delivers very high performance deep packet inspection capabilities to allow TEMs to rapidly develop and deploy content-aware platforms (+)

      Features:

      33077.jpg
      • -Deep Packet Inspection for Content-Aware Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Deep Packet Inspection: Multi-core, multi-threaded MIPS64 processor -Integrated 10 Gbps security acceleration engine
    • EPC-3311
      A high-throughput CPU blade (+)

      Features:

      11896.jpg
      • 1 GHz Pentium III processor
      • Gigabit Ethernet
      • 2 GB SDRAM
    • EPC-6321
      933 MHz Intel Pentium III based PrPMC (+)

      Features:

      19676.jpg
      • 1 GB and 512 MB Memory Options
      • Dual Gigabit Ethernet
      • PICMG 2.15 Compatibility on EPC6321
    • Promentum ATCA-4000
      Single slot AdvancedTCA PICMG 3.0/3.1 compliant module (+)

      Features:

      19737.jpg
      • Single or dual Low Voltage Intel Xeon processors with Intel NetBurst microarchitecture and a high bandwidth front-side bus, 2.0 GHz with 400 MHz system bus, E7501 chipset, 512 Kbytes L2 cache
      • Support for up to 4 GB DDR-266 ECC registered SDRAM via 4 angled DIMM sockets
      • One 64-bit, 33/66 MHz PMC site
  • Schroff Pentair  (6)
    • PXI Backplanes
      A series of PXI backplanes (+)

      Features:

      • Conforms with: PXI specification Rev. 2.0, PICMG 2.0 Rev. 3.0, PICMG 2.1 Rev. 2.0, PICMG 2.8, and PICMG 2.9 Rev. 1.0
      • Clock switch over/clock generation on the backplane
      • 64-bit bus width, system slot on the left
    • CompactPCI 2.16
      A telecom system compliant with PICMG 2.16 (+)

      Features:

      • Incorporates backplane, power supply, cooling, and provisions for monitoring into a single package that provides theoretical data transfer rates of up to 50 Gbits/sec
      • Backplane also supports StarFabric (PICMG 2.17) and serial mesh (PICMG 2.20) applications
      • Based on a 19”, 10U-high subrack with a Schroff CompactPCI packet switching backplane
    • MicroTCA.4 Cube System with MicroRTM
      The MicroTCA.4 cube system is for desktop or bench top use in demanding Test & Measurement applications. The MTCA.4 specification, developed by the advanced physics community, incorporates the MicroRTM section as well as other features. (+)

      Features:

      293460211861994351.jpg
      • In accordance with PICMG MTCA.4 R1.0 specification
      • 5 U, 42 HP cube system for 6 double midâ€?size and 1 double fullâ€?size AdvancedMC modules, 1 double fullâ€?size MCH and 1 double fullâ€?size power module
      • 6 rear transition module slots for double midâ€?size modules and one slot for double fullâ€?size
    • Express Programs
      Conform to PICMG specifications (+)

      Features:

      312702470861240973.jpg
      • ATCA, uTCA, CompactPCI standards
      • Standard and customized solutions available
      • Local and global design and product support
    • MicroTCA.4 12 Slot Chassis
      The new Schroff 9U MicroTCA.4â„¢ chassis provides 12 double mid size AMC slots and 12 double mid size rear transition module slots. It is compliant to the xTCA specification PICMG Physics WG1. The system has two MCH slots and four power module slots. The one dust filter is exchangeable from the front. The System has two redundant hot-swap fan trays for high-precision AMC cooling and RTM cooling. The speed of the fans is separate adjustable for the front and rear. (+)

      Features:

      293458603861143040.jpg
      • 9U MicroTCA.4 system, front handles, PICMG MicroTCA R1.0 and PICMG MTCA.4 R1.0 compliant
      • 2 MCH slots
      • 12 double mid size AMC slots
    • 23098-147
      Available with Full Mesh or Dual Star topology (+)

      Features:

      • 14 slot backplane
      • Proven design
      • Redundant 48VDC power input
  • LCR Electronics  (2)
    • ATCA Rugged Chassis
      Available in 3-slot, 5-slot, and 14-slot (PICMG 3.0 REV 2) (+)

      Features:

      42070.jpg
      • Available in 14-slot (PICMG 3.0 REV 3)
      • Dual 6-slot enclosure to allow for two fully independent, EMI isolated,AdvancedTCA systems to function in a single 12U x 19-inch rack-mountable chassis that meets PICMG 3.0 REV 3 [...]
    • ATCA Chassis
      LCR Elextronics has expanded its existing line of AdvancedTCA (ATCA) systems to include three new rugged chassis (+)

      Features:

      42964.jpg
      • All of the new models conform to MIL-STD-810 Method 514.5 and MIL-STD-167 Type 1, para. 5.1 for vibration as well as MIL-STD-810 Method 513.5 for acceleration
      • The Gemini, built to PICMG 3.0 Rev. 2, and the KBWD, built to PICMG 3.0 Rev. 3, are both 13U chassis available in dual-star 14-slot versions or in mesh 3-, 5- and 7-slot configurations
      • The PICMG 3.0 Rev. 3, the 12U KBWD-2 features a dual 6-slot design, with each electrically isolated, full-mesh backplane featuring four node slots and two hub slots
  • SIE Computing Solutions, Inc.  (13)
    • 2.16 Backplanes
      A line of standard and custom high-power, low noise PICMG 2.16 CompactPCI backplanes (+)

      Features:

      16830.jpg
      • Standard eight-slot CompactPCI backplanes feature PICMG 2.9 IPMB to all slots, hot-swap compliance, and 5V or 3.3V switchable signaling
      • The eight-slot backplane offers one system slot that can be configured as a PICMG 2.16 node slot, six peripheral/PICMG 2.16 node slots, and one fabric slot
      • Custom configurations ranging from two to 21 slots available [...]
    • 2.17 Backplanes
      A line of standard and custom, high-power, low-noise, StarFabric CompactPCI backplanes (+)

      Features:

      16831.jpg
      • Eight and 21 slots standard
      • Two to 21-slot custom configurations available
      • 6U and 7U format
    • 6851 Series FabricPac PICMG 2.16 Platform
      A configurable CompactPCI platform with cPSB compliance (+)

      Features:

      12220.jpg
      • 8U rack-mount/benchtop chassis
      • 8-slot, PICMG 2.16-compliant FABRICON backplane with cPCI, H.110, and IPMB buses
      • Includes a Pentium III CompactPCI SBC to 1 GHz, a Layer 2 or 3 switch card, FDD, CD drive, 10 or 30 Gbyte EIDE hard drive, and memory from 128 to 768 Mbytes SDRAM
    • 535 Series 9U 21 Slot cPCI Enclosure
      A mid-range, 19-inch, 9U rackmount/benchtop enclosure (+)

      Features:

      10309.jpg
      • 21 usable 6U x 160mm front-accessible slots and 21 6U x 80mm rear transition slots
      • 15.75” high x 17” wide x 12” deep
      • .09” lightweight 5052-H32 aluminium
    • 598 Series
      VME64, SUN, and PICMG (+)

      Features:

      • 15.00” (381,0) D x 19” (482,6) W
      • Pizza Box Style
      • Up to 4U High
    • 543 Series
      A PICMG 3.0-compliant AdvancedTCA development system (+)

      Features:

      15497.jpg
      • Available with a two to six-slot full-mesh backplane that supports the AdvancedTCA PICMG 3.1, 3.2, and 3.3 specifications
      • Removable fan tray provides evacuation-style cooling to all card slots
      • Optional rear-mounted AC power supply that provides -48VDC A&B, which eliminates the need for an external -48VDC converter
    • 585 Series CompactPCI Portable Enclosure
      A portable CompactPCI enclosure (+)

      Features:

      12218.jpg
      • PICMG 2.16 cPSB compliant backplane
      • 9U lightweight aluminum enclosure with eight vertical slots and a flush card cage
      • Slot 8 is double in width and reserved as the CPU slot, while Slot 7 is reserved as a fabric slot
    • AdvancedTCA Air Impedance Modules
      PICMG 3.0 (+)

      Features:

      • 8U x 6HP Form factor
      • 280mm depth
      • 6061-T6 Aluminum extruded front panel
    • 686 ATCA Development System
      Available with six-slot dual star and full mesh backplanes (+)

      Features:

      20420.jpg
      • An ATCA-compliant ShMS plugs directly into the Zone 1 connector and manages the ATCA system management interface
      • Optional rear mounted AC power supply provides -48VDCA&B
      • Supports PICMG 3.1, 3.2, 3.3, and 3.4 specs [...]
    • StarFabric PMC
      32-bit/33 MHz, 64-bit/66 MHz PCI interface (+)

      Features:

      • Dual StarFabric links
      • External RJ-45 connections (shielded CAT5 cabling for up to 10 meters) or PICMG 2.17-compatible Pn4 interconnect
      • 400 MBps sustained throughput
    • PICMG 2.16/2.17 and AdvancedTCA Backplanes
      Eight slots standard (+)

      Features:

      • Two- to 21-slot custom configurations available
      • 6U and 7U format
      • 64-bit operation
    • 682
      An ultra-thin (1.7 inches high, 19 inches wide, 17.2 inches deep) rackmount enclosure for Internet/Intranet data networking (+)

      Features:

      • 1U height allows 42 units to fit in a standard six-foot 19-inch rack cabinet
      • Notebook-style 1.44-Mbyte floppy and a CD-ROM
      • IDE drive
    • CG Mupac 682
      A 1U-high rackmount enclosure (+)

      Features:

      • Allows 42 units to fit in a standard 6-foot 19-inch rack cabinet
      • Unit is 1.7 inches high, 19 inches wide, and 17.2 inches deep
      • Notebook-style 1.44-Mbyte floppy drive
  • Mapsuka  (8)
    • PICMG2.0R3.0 and 2.16 Backplanes
      3U/6U, 2/4/6/8/more slots Backplane (+)

      Features:

      • Conform to PICMG 2.0 R3.0 or PICMG 2.16
      • Support Hot Swap feature of PICMG 2.1 R2.0
      • VI/O are user selectable to a +5 V or +3.3 V
    • PICMG2.5R1.0 backplane
      6U, 4/6/8 slots backplane (+)

      Features:

      • Conform to PICMG 2.5 R1.0
      • Support Hot Swap feature of PICMG 2.1 R2.0
      • Time Division Multiplex (TDM) bus signal of the ECTF H110 (CT Bus)
    • PHT02-21610
      6U, 4/6/8 slots backplane (+)

      Features:

      • Conform to PICMG 2.16 R1.0
      • Support Hot Swap feature of PICMG 2.1 R2.0
      • CompactPCI Packet Switching Backplane (CompactPCI/PSB)
    • 4U cPCI horizontal platform
      19" alluminum alloy chassis, 4U (H) x 84T (W) x 283 mm (D) (+)

      Features:

      • Holds eight, 6U x 160 mm cards, horizontally oriented, front load, flush
      • Includes 8-slot CompactPCI backplane, per PICMG 2.0 R3.0 or PICMG 2.16
      • With rear I/O card cage, to accommodate eight, 6U x 80 mm plug in transition modules
    • 2U-4slot platform
      2U CompactPCI platform (+)

      Features:

      • Aluminum enclosure: 2U (H) x 84T (W) x 283 mm (D)
      • Front cage: 4-slot, 6U x 160 mm; Rear I/O: 4-slot, 6U x 80 mm
      • 250 W ATX or 250 W CompactPCI power supply
    • ATCA Backplane
      Conform to PICMG 3.0 (+)

      Features:

      • Dual Star Topology
      • 2 Hub slots, 12 Node slots
      • 2 PEM (Power Entry Module)
    • 4U Horiz Platform
      4U 8-slot, horizontal type, CompactPCI platform; custom design is available (+)

      Features:

      • Aluminum enclosure: 4U (H) x 84T (W) x 283 mm (D); Front cage: 8-slot, 6U x 160 mm; Rear I/O: 8-slot, 6U x 80 mm
      • 400 W ATX or 250 W CompactPCI power supplies
      • Option: 1 x 3.5" HDD and 1 x slim CD-ROM device holders
    • PXI Backplane
      3U, 4/6/8 slots backplane (+)

      Features:

      • Conform to PXI R2.1
      • Support Hot Swap feature of PICMG 2.1 R2.0
      • Daisy-chained local bus
  • Electronic Solutions  (14)
    • PICMG 2.16 Development Chassis
      Up to 21 slots in a 19" rack or more for 23" racks (up to 24 node slots) (+)

      Features:

      19711.jpg
      • Compliance to PICMG 2.16
      • Compliance to PICMG 2.0 rev. 3.0
      • 64 bit datawidth
    • PICMG 2.16: cPCI EtherPlane Backplane
      Up to 21 slots in a 19” rack or more for 23” racks (up to 24 node slots) (+)

      Features:

      • Compliance to PICMG 2.16
      • Compliance to PICMG 2.0 rev. 3.0
      • Supports PICMG 2.1 rev. 2 for basic hot swap
    • Ventus
      A 21-slot, CompactPCI chassis (+)

      Features:

      13978.jpg
      • Backplane compliant with compliant with PICMG 2.0 Rev. 3.0, PICMG 2.16 packet-switching backplane architecture, PICMG 2.5 CTbus (H.110), and PICMG 2.9 system management routing
      • Features APW Electronic Solutions' StealthBridge Technology
      • APW Electronic Solutions Patented Hybrid serial-parallel fan cooling scheme with three hot-swappable fan trays provides high fault tolerant cooling
    • CompactPCI/cPSB EtherPlane
      A series of CompactPCI packet switched backplanes (+)

      Features:

      11084.jpg
      • Up to 21 slots in a 19" rack or more slots for 23" racks (up to 24 node slots)
      • Compliance with PICMG 2.16 and PICMG 2.0 Rev. 3.0
      • 64-bit datawidth
    • CompactPCI/PSB backplane
      An 8-, 15-, or 21-slot backplane designed to meet the CompactPCI 2.16 Packet Switching Backplane (cPSB) specification (+)

      Features:

      10881.jpg
      • H.110 support consisting of two power slots, a right-hand processor slot, 12 node board slots, and two fabric board slots
      • 9U chassis fits within the standard 19"-rack mechanics
      • Optional ability to bridge two CompactPCI segments
    • cPCI Ventus Chassis
      12U chassis (+)

      Features:

      • 20.97" (H) x 17" (W) (19" rack mount) x 12" (D)
      • APW Electronic Solutions Patented Hybrid Serial-Parallel fan cooling scheme
      • PICMG 2.0 R.3.0 CompactPCI 21 slot backplane with
    • AP-7543
      Designed specifically for Computer Telephony (CT) applications (+)

      Features:

      • Fully compliant to the PIC Industrial Computer Manufacturers Group (PICMG) Computer Telephony specifications, and has provisions to support basic hot swap of CT and peripheral boards
      • For use in high end, fault tolerant system platforms in the CT industry
      • Backplanes are also fully compliant to Enterprise Computer Telephony Forum (ECTF) H.110 specifications, the PICMG core, and CompactPCI CT specifications to ensure multi-vendor interoperability across a wide range of applications [...]
    • CompactPCI 1U and 2U Zephyrs
      1.735" (H) x 17.0" (19" rackmount) x 11.75" (D) (+)

      Features:

      20445.jpg
      • Truly fits within the 1U rack aperture
      • 2 slots 6U CompactPCI
      • PICMG 2.0 R3.0 backplane
    • CompactPCI CT backplane
      A Computer Telephony (CT) backplane (+)

      Features:

      • Fully compliant to PICMG and ECTF CT specifications
      • 6U form factor
      • P3 user definable I/O
    • Zephyr Chassis
      Off-the-shelf, 1U and 2U, low-profile CompactPCI chassis (+)

      Features:

      • 2U has removable fan tray with side-to-side airflow path in a push configuration Fan tray carries three fans and an optional fan monitor with a status LED
      • Total airflow of 41 cfm
      • Chassis fully compliant with IEEE 1101.10/11 specifications with horizontal mounting for 6U x 160 mm CompactPCI cards in the front and 6U x 80 mm I/O cards from the rear
    • ATCA Blank Filler and Custom Front Panels
      8U x 6HP (+)

      Features:

      • Sheet metal construction with optional extruded aluminum versions available
      • Dual alignment pins and captive thumb screws
      • Customized cut-out configurations and finishes available
    • Thermal management
      8U x 6HP x 280 mm or 70 mm depth (+)

      Features:

      20430.jpg
      • Extruded and sheet metal aluminum versions available
      • Includes EMI/RFI shielding fabric gasket with minimal compression set
      • Optional beryllium copper gasket available
    • cPSB Vanguard Development Chassis
      A PICMG 2.16-compliant chassis (+)

      Features:

      11103.jpg
      • Features 15 slots of CompactPCI/cPSB with dual fabric slots with the rest of the slots as nodes
      • Optional configuration allows system slot to participate as a node slot
      • 9U chassis with dual pluggable power supplies
    • ATCA Blank Filler & Custom Front Panels
      8U x 6HP with optional side 2 covers (+)

      Features:

      • Sheet metal construction and extruded aluminum versions available
      • Dual alignment pins and captive thumb screws
      • Customized cut-out configurations and finishes available
  • GE Intelligent Platforms, Inc.  (15 of 19)
    • AT922 ATCA Hub
      48 1000BASE-T ports in the ATCA 8U form factor; IPMI compliant according to PICMG 3.0 specification (+)

      Features:

      19049.jpg
      • Dual PMC slots compliant to PICMG 2.15 (dual GbE connected to the fabric)
      • Four 10/100/1000BASE-T copper and four 1000Base-T fiber ports to the front panel
      • Four 10/100/1000BASE-T copper ports to the rear I/O
    • VMICPCI-P303
      Up to 16 slots, 6U single wide (4 HP) CompactPCI (CPCI) slots (+)

      Features:

      • +5V, 33 MHz PCI bus interface
      • 32 or 64-bit buses available
      • User-settable geographic address for each physical slot
    • CT9
      6U CompactPCI all-in-one CPU (+)

      Features:

      18532.jpg
      • PICMG 2.16 server blade
      • Intel Pentium M Processor
      • 600 MHz to 1.8 GHz
    • A10200
      The A10200 ATCA single board computer features dual Intel Xeon 5600/5500 Series quad- or six-core processors and up to 64 Gbytes of DDR3 SDRAM memory (+)

      Features:

      • Dual sockets support up to two Intel Xeon 5600/5500 Series long-life processors with Intel 5520 chipset
      • Intel L5638 and L5518 Xeon NEBS processors
      • Up to 8 DDR3-SDRAM VLP DIMMs
    • A10200
      The A10200 AdvancedTCA single board computer features dual Intel Xeon 5600/5500 Series quad- or six-core processors and up to 64 Gbytes of DDR3 SDRAM memory (+)

      Features:

      • Dual sockets support up to two Intel Xeon 5600/5500 Series long-life processors with Intel 5520 chipset
      • Intel L5638 and L5518 Xeon NEBS processors
      • Up to 8 DDR3-SDRAM VLP DIMMs
    • CP944
      A Layer 2, non-blocking, full wire speed, CompactPCI Ethernet switch with Configuration Management Control (CMC) (+)

      Features:

      11085.jpg
      • Provides an economical solution for high availability PICMG 2.16 systems
      • Carrier grade, designed for NEBS compliance
      • 24 ports of 10/100 Mbit Ethernet to the rear I/O and optionally 2 x 1 Gigabit Ethernet fiber uplinks to the front or rear
    • CP920
      6U single slot, CompactPCI carrier-grade switch designed for NEBS compliance (+)

      Features:

      19048.jpg
      • Full managed solution with Layer 2/3/4 switching at full wire speed
      • Telnet – accessible via any switch port and console serial interface
      • QoS on Layers 2/3/4 and 802.1p tag
    • CP934
      A CompactPCI, managed Ethernet switch (+)

      Features:

      11093.jpg
      • Layer 2/3/4 switching
      • Carrier grade, designed to meet NEBS requirements
      • Single-slot, 6U
    • CT8
      6U CompactPCI CPU single board computer (+)

      Features:

      12104.jpg
      • Ultra Low Voltage Intel Pentium®III Processor
      • 512k, up to 933 MHz
      • Up to 2 GB SDRAM with ECC
    • VMICPCI-7806
      Intel's Pentium M processor up to 1.8 GHz or Intel's Celeron M processor up 1.3 GHz (+)

      Features:

      20499.jpg
      • 6U single-slot universal controller with up to 1 G of DDR SDRAM
      • Dual 3.3V PMC sites (one for 64-bit/66-MHz PCI, and one for 32-bit/33-MHz PCI)
      • Two GbE ports, two serial ports, two USB 2.0 ports, parallel and serial ATA, up to 1 GB of CompactFlash
    • VMICPCI-7806
      Intel's Pentium M processor up to 1.8 GHz or Intel's Celeron M processor up to 1.3 GHz (+)

      Features:

      19045.jpg
      • 6U single-slot universal controller with up to 1 GB of DDR SDRAM
      • Dual 3.3 V PMC sites (one for 64-bit/66-MHz PCI, and one for 32-bit/33-MHz PCI)
      • Two GbE ports, two serial ports, two USB 2.0 ports, parallel and serial ATA, up to 1 GB of CompactFlash
    • CT9-cPCI 6U SBC
      A 6U CompactPCI all-in-one CPU board (+)

      Features:

      20501.jpg
      • Integrated low power Intel Pentium M Processor 600 MHz to 1.6 GHz
      • Dual Gigabit Ethernet channels, 10/100/1000BaseT, front or rear optional
      • Supports full hot swap
    • CP924
      A CompactPCI Ethernet switch (+)

      Features:

      11077.jpg
      • Single-slot, 6U CompactPCI board
      • Hot swap capable
      • Carrier grade, designed for NEBS compliance
    • AT920
      A 24-port layer 2/3 AdvancedTCA switch (+)

      Features:

      16101.jpg
      • Carrier-grade switch
      • 16 ports compliant to PICMG 3.0
      • Up to eight Gigabit Ethernet I/O ports
    • CP6-GESW24M3
      24-port 10/100/1000Base-T Ethernet Layer 2 and Layer 3 switching (+)

      Features:

      20067.jpg
      • Managed switch is PICMG 2.16 and 2.9 compliant with extensive built-in test functionality
      • PMC slot for adding additional features
      • Conduction-cooled version with enhanced temperature protection
  • Axiomtek  (3)
    • SBC81207
      Axiomtek's SBC81207 PICMG 1.0 full-size CPU card is based on the newly launched Intel Atom Processors N450, D410 and D510 [...] (+)

      Features:

      45567.jpg
    • SBC81206
      Extreme and cost-effective Intel 945GC PICMG 1.0 single board computer is powered by the Intel Core 2 Duo with the Intel 945GC chipset (+)

      Features:

      45568.jpg
      • LGA775 for Intel Core 2 Duo/Pentium D/Pentium 4/Celeron processor with 533/800 MHz
      • Mobile Intel945GC Express chipset
      • 2 DDR2 DIMM support up to 2 GB memory
    • SHB211
      Graphic-rich Intel GM45 PICMG 1.3 half-size CPU card with display port offers extreme performance adopting Intel GM45 Express chipset and Intel Core 2 Duo processor (+)

      Features:

      45569.jpg
      • Socket P for Intel Core 2 Duo/Celeron M processor with 667/800/1066 MHz
      • Intel GM45+ICH9M chipset (optional ICH9M-E)
      • 2 DDR3 SODIMM support up to 8 GB
  • ACT/Technico  (5)
    • PICMG 2.16 Development Platform
      A CompactPCI packet switching backplane (PICMG 2.16) development platform (+)

      Features:

      • Compact, portable chassis
      • 8-slot backplane provides a mix of PICMG 2.16 node slots and two standard CompactPCI slots
      • Floppy drive, hard disk, and CD-ROM drive
    • RAIDStor Development Kit
      Contains everything needed to establish a complete Embedded Network Attached RAID solution with dual star topology in a PICMG 2.16 or VITA 31.1 enclosure (+)

      Features:

      20060.jpg
      • 19-inch rackmount chassis or tower with either PICMG 2.16 or VITA 31.1 backplane
      • Two RAIDStor 6200 storage blades, with up to 120 GB per blade
      • Two 10/100 or Gigabit Ethernet fabric switches
    • RaidStor
      A 6U, single-slot, PICMG 2.16, network-attached storage blade (+)

      Features:

      15107.jpg
      • PICMG 2.16 packet switched backplane compatible
      • High-availability and hot-swap capable
      • Removable, 120 Gbyte per blade capacity
    • VITA 31.1 Development Chassis
      Ethernet fabric on VME/VITA 31.1 development chassis (+)

      Features:

      22087.jpg
      • Enables the use of Ethernet fabric switching technology in a VME64x environment by leveraging PICMG 2.16 technology via the J0 connector (VITA 31.1)
      • Suitable for implementing Ethernet fabrics in a VME64x environment without losing access to current investments
      • Provides two system and two node PICMG 2.16/VITA 31.1 slots, and 10 VME64x slots
    • Ethernet Switches
      Ethernet switches that provide up to 24 ports 10/100 (Fast) or 10/100/1000 (GbE) (+)

      Features:

      30415.jpg
      • Solutions based on VMEbus, VITA 31.1, PICMG 2.16 (cPSB), and CompactPCI platforms
      • Extended temperature and conduction-cooled versions for rugged environments
      • Configurable, fully managed (Layer 3), wirespeed, and unmanaged versions
  • NEXCOM International Co LTD  (4)
    • NBP-14570-BX
      14-slot PICMG/ISA/PCI backplane (+)

      Features:

      • Seven PCI/1 x PICMG/Four PCI Express x1 lane/One PCI Express x16 lane
      • Size: 317 mm x 328 mm
      • Supports ATX Power Supply
    • Peak 870VL2
      Fully RoHS compliant single board computer (+)

      Features:

      • Full-size PICMG 1.3 product supporting socket LGA775 processors up to Pentium 4 at speeds up to 3.8 GHz
      • The product uses hyperthreading technology and incorporates the Intel 945G and ICH7 chipsets, which support Intel's new dual core processors
      • Based on advanced PCI Express architecture
    • MAXI 3600
      A 3U 850 MHz Pentium computer (+)

      Features:

      7526.jpg
      • 440BX chipset
      • 66/100 MHz front side bus
      • Up to 384 Mbytes of SDRAM
    • PEAK 8920VL2
      PICMG 1.3 SHB Express (+)

      Features:

      32705.jpg
      • Dual LGA771 sockets support two Quad-Core / Dual-Core Intel® Xeon® processor 1066/1333 FSB up to 3 GHz
      • Intel 5000P chipset
      • Four 240-pin DDR2 FBDIMM memory, 533/667 MHz up to 8 GB
  • DSS Networks  (2)
    • Metro-Switch 8260
      DSS Networks announces an addition to their PICMG 2.16 line of CompactPCI fabric switches with a higher performance, reduced cost 12-port CompactPCI PICMG 2.16 compliant switch [...] (+)

      Features:

      35216.jpg
    • CPCI 2.16 8261
      12-port Gigabit Ethernet switch blade (+)

      Features:

      • 12 ports of 10/100/1000Base-T Gigabit Ethernet over copper with two 1000Base-SX/LX fiber uplinks
      • PICMG 2.16 6U fabric card compliant
      • Compatible with both standard CompactPCI and PICMG 2.16 backplanes
  • Artesyn Embedded Technologies  (15 of 20)
    • CPCI7200 Board
      1.06 or 1.5 GHz Intel Core2 Duo processor (+)

      Features:

      • 533 or 667 MHz front side bus
      • Intel E7520 + 6300ESB dual channel 3.2 GBps memory controller
      • 2 GB ECC-protected DDR2-400
    • CPCI7200 CompactPCI dual core processor board
      The CPCI7200 SBC offers high speed, server-class performance for advanced telecom and control plane applications (+)

      Features:

      36476.jpg
      • 1.06 or 1.5 GHz Intel Core2 Duo processor
      • 533 or 667 MHz front side bus
      • Intel E7520 + 6300ESB dual channel 3.2 GBps memory controller
    • CPCI-7147 Processor Board
      CompactPCI 2.16 processor board (+)

      Features:

      23663.jpg
      • 1.1 GHz Intel Pentium M processor
      • 400 MHz frontside bus
      • Intel 855GME 1.6 GBps memory controller
    • CPCI6200 SBC
      The CPCI6200 SBC from Emerson Network Power offers high-speed bandwidth and server-class performance for compute intensive and control plane applications (+)

      Features:

      41682.jpg
      • 1.3 or 1.5 GHz Freescale MPC8572 dual core integrated processor
      • Integrated north bridge in the processor (no frontside bus)
      • 2 GB or 4 GB ECC-protected DDR3-800
    • CompactPCI Processor Blades
      Intel architecture and PowerPC processor blades optimized for performance, power, and features (+)

      Features:

      20496.jpg
      • Universal mode system- or peripheral-slot functionality
      • IPMI system management support (PICMG 2.9)
      • CompactPCI Packet Switching Backplane compliant (PICMG 2.16)
    • CPCI-7145 Processor Board
      High performance CompactPCI processor board (+)

      Features:

      32568.jpg
      • 1.8 and 1.6 GHz Intel Pentium M processor
      • 400 MHz front-side bus
      • Intel E7501 dual-channel, 3.2 Gbps memory controller
    • ATCA-7350
      High-performance processor blade with SMP support (+)

      Features:

      37855.jpg
      • Two, Quad-Core Intel Xeon (2.13 GHz) LV processors
      • Up to 32 GB main memory
      • Multiple software packages including operating system
    • CPX8216 CompactPCI Configurable Systems
      A CompactPCI system designed for critical telecom infrastructure applications that need to meet 99.999% availability (+)

      Features:

      9165.jpg
      • Dual 8-slot CompactPCI passive backplane
      • PowerPC 750 system controller CPU option
      • Hot swappable CPU and I/O boards
    • ATCA-7150
      High performance processor blade with SMP support (+)

      Features:

      34889.jpg
      • Two, 2.13 GHz Dual-Core Intel Xeon LV processors
      • Multiple software packages including operating systems
      • PICMG 3.0 base interface and PICMG 3.1 Option 1 fabric interface support
    • CPCI7203 PICMG 2.30
      The Emerson Network Power CPCI7203 3U form factor SBC features the Intel Core i7 integrated dual-core processor for use in high performance, space-constrained applications (+)

      Features:

      45777.jpg
      • On-board memory includes up to 4GB DDR3 and 256KB non-volatile Ferroelectric Random Access Memory (F-RAM)
      • F-RAM does not require batteries or periodic refreshes and offers many more read/write cycles and faster performance than flash memory, which benefits critical non-volatile data storage, data logs and dynamic program updates
      • The Trusted Platform Module (TPM) enhances data security and encryption capabilities
    • CPCI7203 3U Board
      The Emerson CPCI7203 SBC uses the Intel Core i7 integrated dual-core processor in the 3U form factor for high performance in space-constrained applications (+)

      Features:

      46214.jpg
      • Intel Core i7 integrated dual-core integrated processor (1.06 GHz ULV or 2.0 GHz LV)
      • 1GB, 2GB or 4GB ECC-protected DDR3-800/1066 (soldered)
      • Mobile Intel 5 Series chipset: Ibex Peak-M PCH
    • ATCA-7301
      High performance AdvancedTCA processor blade for data and control plane applications (+)

      Features:

      34907.jpg
      • 2.16 GHz Intel Core 2 Duo processor
      • Onboard 24-port Gigabit Ethernet switch
      • AMC.0, AMC.1, and AMC.2 compliant with two mid-size AMC sites
    • Centellis 3406 ATCA Communications Server
      AdvancedTCA Communications Server (+)

      Features:

      33059.jpg
      • Fully integrated and verified AdvancedTCA based communications server
      • RoHS (5 of 6) compliant
      • 14-slot, 19", 12.5U form factor
    • Centellis 3600 ATCA Communications Server
      AdvancedTCA Communications Server (+)

      Features:

      33060.jpg
      • Fully integrated and verified AdvancedTCA based communications server
      • RoHS (5 of 6) compliant
      • 16-slot, 23", 12.5U form factor
    • ATCA-7221 AdvancedTCA Processor Blade
      High performance processor blade with SMP (+)

      Features:

      32574.jpg
      • RoHS (6 of 6) compliant
      • Dual 2.8 GHz Intel Xeon LV processors
      • Complete software operating environment including OS
  • Concurrent Technologies, Inc.  (8)
    • FP 100/008 Switched Fabric Board
      10 ports, Ethernet switched fabric board, 10/100BASE-T (+)

      Features:

      19731.jpg
      • PICMG 2.16 and VITA 31.1 compatible
      • 8 node ports, fabric-to-fabric link, and a front panel interface
      • Marvell 88E6083 Fast Ethernet device
    • FP 110/008 Gig Ethernet Switch Fabric Board
      Entry-level, 10-port Ethernet switched fabric board for PICMG 2.16- or VITA 31.1-based systems (+)

      Features:

      22339.jpg
      • Up to 10/100/1000BASE-T Ethernet per port
      • Eight packet switching node ports
      • Fabric-to-fabric Ethernet link
    • EthernetSwitch Fabric
      10 ports, Ethernet switched fabric board, up to 10/100/1000BASE-T (+)

      Features:

      • 8 node ports, fabric-to-fabric link, and a front panel interface
      • Marvell 88E6185 Gigabit Ethernet or Marvell 88E6083 Fast Ethernet devices
      • Non-blocking Layer 2 “unmanaged” switch
    • SY AMC/205
      MicroTCA development system (+)

      Features:

      38767.jpg
      • Supports 4 single-width and 1 double-width AdvancedMC
      • Supports PICMG MicroTCA.0 1.0 and PICMG AMC.0
      • MicroTCA backplane provides 5 vertically mounted card slots: 1 AdvancedMC double-width full-height slot; 4 AdvancedMC single-width full-height slots; 1 MicroTCA Carrier Hub slot; I MicroTCA Power Input Module Slot [...]
    • FP 110/019 - 6U CompactPCI Ethernet Switch
      FP 110/019 is a 24-port 10/100/1000Mbps Ethernet Switched Fabric Board for use in CompactPCI® PICMG® 2.16 and VITA 31.1 Packet Switched Backplane environments. It supports up to nineteen node boards, a fabric to fabric link and for user connections, up to four front panel Ethernet interfaces. It offers high speed, full line rate Layer 2 switching fabric on all Ethernet ports. Quality of Service (QoS) operation is supported with four priority queues and a variety of traffic classes for time-critical and multimedia traffic. System monitoring is provided by the PICMG 2.9 compliant IPMI subsystem, supporting the IPMB0 serial management bus. The FP 110/019 is an excellent choice for cost sensitive applications. Typical applications include networking equipment, voice over IP (VoIP) telephony systems and blade-based servers. FEATURES: 6U CompactPCI, Layer 2 Ethernet Switch, PICMG 2.16 and 2.9 compliant [...] (+)

      Features:

    • FP 110/019
      A 24-port GbE Switched Fabric Board for PICMG 2.16- or VITA 31.1-based systems (+)

      Features:

      32516.jpg
      • Typically consumes less than 20 W
      • Offers twenty-four 10/100/1000Mbps autonegotiating Ethernet ports, 19 accessible via a PICMG 2.16 or a VITA 31.1 packet switched backplane
      • Switch core contains a wire-speed, Layer 2, Quality of Service (QoS) switch fabric
    • SYPCI/SE8 8 slot PICMG 2.16 Portable Chassis
      10U 19" rack mountable EMC CompactPCI enclosure (+)

      Features:

      22386.jpg
      • PICMG 2.16, Packet Switching Backplane
      • Eight slot backplane
      • One system slot (left hand slot)
    • SY PCI/P10 : 10 Slot, 10U PICMG 2.16 Chassis
      10U 19" rack mountable EMC CompactPCI enclosure (+)

      Features:

      22381.jpg
      • PICMG 2.16, Packet Switching Backplane
      • 10 slot backplane
      • One system slot (left hand slot)
  • Advantech Corporation  (15 of 22)
    • MIC-3358
      A 6U CompactPCI Intel Pentium 4 Processor-M board up to 2.2 GHz (+)

      Features:

      14178.jpg
      • Dual Gigabit Ethernet onboard
      • Up to two Gbytes (DDR-266) memory onboard with ECC
      • Intel 845E chipset
    • MIC-3369
      A 6U CompactPCI Intel Pentium M processor board up to 1.6 GHz (+)

      Features:

      14177.jpg
      • Supports Dual Gigabit LANs
      • Up to 2 Gbytes (DDR-200) memory onboard with ECC
      • Intel E7501 chipset
    • MIC-3042
      8-slot 6U CompactPCI backplane (+)

      Features:

      32851.jpg
      • AC or DC CompactPCI 500 W + 250 W redundant (2+1) power supplies
      • PICMG 2.16 (CompactPCI Packet Switching Backplane) compliance
      • PICMG 2.5 (CompactPCI Computer Telephony) compliance
    • MIC-3392
      Supports Intel Core 2 Duo processor (+)

      Features:

      32852.jpg
      • Intel 945GM chipset supports 533/667 MHz FSB
      • Up to 4 GB (DDR2 533/667) memory with SODIMM expansion
      • Comprehensive I/O capability, dual Gigabit Ethernet, SATA, CompactFlash
    • MIC-3392L
      A high-performance, power-efficient CompactPCI single board computer based on the Intel Core 2 Duo processor (+)

      Features:

      43483.jpg
      • Supports Intel Celeron M 440 processor
      • Intel 945GME chipset supports 533/667 MHz FSB
      • Up to 2 GB (DDR2 533/667) memory with SODIMM expansion
    • MIC-3395 2nd generation Intel® CoreTM i3/i5/i7 Processor Blade
      Supports 32nm Intel® Core™ i3, i5 and i7 processors (+)

      Features:

      • Intel® QM67 PCH with embedded graphic controller (dual independent display)
      • Up to 16 GB (DDR3 1066/1333) ECC memory (max 8GB on board, socket SO-UDIMM x1, max 8GB)
      • Optimized design in a single-slot SBC with 2.5" SATA-III HDD/CompactFlash socket
    • MIC-3950
      6U dual PMC carrier board (+)

      Features:

      11890.jpg
      • 32-bit/33MHz CompactPCI interface
      • On-board PCI-to-PCI bridge
      • Uses a TI PCI2250 PCI-to-PCI bridge to generate the local on-board PCI bus, ensuring that only one load is present in the CompactPCI bus
    • Ready-to-Go cPCI Platform for Telecom
      MIC-3369A – CompactPCI 6U CPU board with Intel Pentium M Processor and Intel E7501-based hardware platform (+)

      Features:

      20485.jpg
      • Supports Intel Pentium M 745 processor @ 1.8 GHz/2 MB L2 cache and Pentium M processor @ 1.6 GHz/1 MB L2 cache
      • Dual gigabit Ethernet on board
      • Up to 2 GB (DDR-200) memory on board with ECC/One 64-bit/66 MHz PMC expansion slot
    • Core™2 Duo Ruggedized 6U cPCI Board
      Supports board-mounted Intel Core Duo LV processor L2400 or the 64-bit Core2 Duo ULV processor U7500 (+)

      Features:

      35982.jpg
      • Intel 945GME chipset supports 533/667 MHz FSB
      • Up to 4 GB DDR2 533/667 memory with SODIMM expansion
      • Comprehensive I/O capability, with two dual Gigabit Ethernet through RIO, SATA HDD, CompactFlash, VGA port
    • MIC-3359
      Higher performance -- Intel desk top Pentium 4 and Mobile Pentium 4 M processor up to 2.0 GHz-plus (micro FCPGA, Socket 478) (+)

      Features:

      18360.jpg
      • Intel 845GV chipset support 400/533MHz FSB
      • 6U 8HP form factor
      • Intel ICH4 Ethernet and reserve Intel 82551ER 10/100 Fast Ethernet (Intel 82540EM Gigabit LAN upgradeable )
    • MIC-3392 Intel® Core™2 Duo /Celeron® M 440 6U CPCI SBC
      The MIC-3392L is a full featured, but optimized version using the Intel Celeron M 440, and is ideally suited for cost-sensitive control plane applications (+)

      Features:

      44166.jpg
      • It is built on the proven MIC-3392 core design that uses the Intel 945 chipset for high-speed DDR2 onboard/pluggable memory, integrated graphics, and standard I/Os including onboard CompactFlash and 2.5" SATA HDDs
      • Dual GbE front ports and PICMG 2.16 support give it full connectivity for computer telephony, IPTV, satellite and high-performance applications such as radar, imaging, instrumentation, communications, telephony and industrial control
      • Additional flexibility is achieved through the onboard PMC socket, which can host additional Ethernet ports
    • MIC-3032
      8-slot 6U CompactPCI backplane (+)

      Features:

      13752.jpg
      • Supports rear I/O
      • Versatile power options
      • Hot-swappable fan module
    • MIC-3031
      14-slot 6U CompactPCI backplane (+)

      Features:

      13751.jpg
      • Supports rear I/O (IEEE 1101.11)
      • 560 W 2+1 redundant ATX power supply
      • Three hot-swappable fans
    • MIC-3032/8
      An 8-slot chassis in a 9U-high enclosure (+)

      Features:

      6874.jpg
      • PICMG 2.5 computer telephony specification compliant
      • Supports H.110 CT bus and rear panel I/O
      • 32-bit or 64-bit operation
    • MIC-3033
      5-slot 6U CompactPCI backplane (+)

      Features:

      13753.jpg
      • Supports rear I/O
      • H. 110 CT bus compliant (PICMG 2.5)
      • 300 W ATX 1+1 redundant power supply
  • Kaparel Corporation  (15)
    • Backplanes
      CompactPCI backplanes designed to accommodate rear mount , low profile bridge modules (+)

      Features:

      41088.jpg
      • CPCI- PICMG 2.16 Ethernet Packet Switching Backplane specification
      • CPCI- PICMG 2.17 Star Fabric Specification
      • CPCI- CompactPCI H.110
    • 23000 Series
      A series of 3U PXI backplanes (+)

      Features:

      16945.jpg
      • PXI R2.0, PICMG 2.1 R1.0 Hot Swap Specification, and PICMG 2.8 draft specification compliant
      • One 64-bit CompactPCI bus and three to seven peripheral slots
      • Supports 32/64-bit, 33/66 MHz (66 MHz only in five or less slots)
    • PS4800
      A 6U x 84HP CompactPCI StarFabric backplane (+)

      Features:

      • 16 card slots
      • Two 8-slot, 64-bit CompactPCI buses operating at 33 MHz PCI or 66 MHz PCI-X
      • Selectable V(I/O) (3.3V or 5V)
    • AdvancedTCA Faceplates
      A complete range of PICMG 3.0 AdvancedTCA face plates, filler panels and handles in brushed stainless steel (+)

      Features:

      • Each Face Plate comes with 2 locking latches attached
      • Face Plates provide for the I/O interface
      • Filler Plates are used in place of unused/reserved slots and provide for EMI protection and air-flow management
    • PS44xx Modular Series
      6.5U CompactPCI, 32/64-bit family of modular backplanes (+)

      Features:

      • H.110 support, three to eight-slot configurations for both PCI and H.110
      • 12/16/20/24/28/32HP
      • +5 V, 33 MHz PCI bus interface
    • PS14xx & PS14xxB Modular Series
      6U CompactPCI, 32/64-bit family of modular backplanes (+)

      Features:

      • Two to eight-slot configurations; left host positioning available; 12/16/20/24/28/32HP
      • The entire PS14xx series is designed to accept mechanical hot swap
      • Power distribution via ATX power connectors
    • PS49xx Packet Switch Series
      A series of Compact Packet Switching Backplanes (cPSB) that support Switched Ethernet, as defined by the PICMG 2.16 specification (+)

      Features:

      10262.jpg
      • 7U x 84HP, PICMG 2.16 compliant
      • Offers high capacity CompactPCI, incorporating Packet-Switching architecture for developers of next-generation telecom networks
      • The Compact Packet Switching Backplane provides a way to design telephony and high availability systems that combine CompactPCI with Ethernet for high-speed systems
    • High Speed Backplanes
      Off-the-shelf and custom high-speed backplane solutions (+)

      Features:

      • Faster-to-market solutions for embedded applications
      • VME, CompactPCI, Switch Fabric, and AdvancedTCA architectures
      • Utilize quality standards and procedures and continuous improvement
    • StarFabric Development Chassis
      PS6090 StarFabric Backplane Development Platform provides a PICMG 2.17 compliant system for the development of next-generation network systems (+)

      Features:

      14871.jpg
      • Includes a 6U PS4800 2.17 backplane
      • 9U chassis
      • Can be configured with power supplies and the StarGen SFS2100 StarFabric switch [...]
    • PS1257
      A 6U power supply backplane capable of handling two 3U, or one 6U hot-swappable power supply modules (+)

      Features:

      • 8HP wide
      • Uses 47-pin connector specified in PICMG 2.11 with power distributed from the board via 18-guage ATX-style wiring harness assemblies
      • N+1 configuration
    • 2U rack-mounted MicroTCA chassis
      2U rack-mounted MicroTCA chassis with 14-slot backplane (+)

      Features:

      • Complies with PICMG MicroTCA 0.R1.10 and AMC 0.R1.0
      • System availability of at least 99.999%
      • Hot swap compatible
    • PicoTCA 2U Shelf
      Modular 19-inch chassis in 2U design supporting up to 12 AMC and an MCH in full–size and compact form factors, and as an option also in “double full-size” (+)

      Features:

      • Integrated 90-264 VAC power pack supplies the necessary voltages of 3.3 V for the IPMI and 12 V for the AMCs
      • PicoTCA was developed for laboratory and field environments and reflects essentially the specifications of PICMG MicroTCA 0.R1.0
      • Existing and new applications can be migrated to this MicroTCA platform both quickly and cost effectively
    • AdvancedTCA Face Plates
      A range of PICMG 3.0 AdvancedTCA face plates, fillers, panels, and handles in brushed stainless steel (+)

      Features:

      19851.jpg
      • Available with optional EMC gasketss; adhesive foam, adhesive finger stock, or mechanical snap-in styles
      • Handle locking device acts as a grounding feature and securely locks the handle under seismic Zone 4 conditions (NEBS Level 3) [...]
    • PS1247
      A 6U double-wide power supply backplane capable of handling four 3U, or two 6U hot-swappable power supply modules (+)

      Features:

      • 16HP wide
      • Uses 47-pin connector specified in PICMG 2.11 with power distributed from the board via 18-guage ATX-style wiring harness assemblies
      • N+1 configuration
    • Ripac MPS Electronic Packaging
      Systems for the configuration of industrial computers to VME, CompactPCI specifications (+)

      Features:

      • Fully assembled, pre-wired and tested, including backplane and power supply units
      • Individual ventilation concepts
      • Conforms to IEC 60 297-3 & -5 and IEEE 1101.1/10/11, as well as CompactPCI 2.0 (PICMG)
  • Kontron  (15 of 18)
    • CP6000-Value
      CompactPCI/PICMG 2.16 cost optimized value oriented design (+)

      Features:

      30189.jpg
      • Low Power Celeron (no cache) up to 1 GHz
      • Single slot 4HP CPU with passive cooling
      • Scalable memory size up to 2 GB PC333 SDRAM
    • KISS Rack Family
      Latest generation of Industrial-grade rack mount systems (+)

      Features:

      33513.jpg
      • Quiet operation
      • Shock mount drive bays
      • Redundant power supplies
    • 6U CPCI GbE Switch
      PICMG 2.16 compliant 6U CompactPCI managed Ethernet switch now available in three rugged levels -- R1, R2 and R3 for scalable ruggedness (+)

      Features:

      36101.jpg
      • Boost in switching capacity allows systems to stay ahead of the rising transaction and traffic load for VoIP applications
      • Supports all relevant standards in carrier grade L2 and L3 switching, routing, VLANs and QoS (Diffserv) developed by Kontron
      • Comes with the latest technologies for non-blocking layer 3 switching and routing and has a 24-port GbE layer 3 switch with 19 link ports to CPCI boards and 1 link port to second fabric boards (all ports 10/100/1000BASE-T)
    • CP6923 GbE Switch
      6U CompactPCI Gigabit Ethernet Switch, PICMG 2.16 compliant (+)

      Features:

      32256.jpg
      • Leading edge technology based on BCM5650X chip
      • 24x Gigabit Ethernet ports
      • Non-blocking layer 2 and 3 switching and routing
    • CP6016
      CompactPCI/PICMG 2.16 Intel Core2 Duo 2.53 GHz (T9400) System/Peripheral CPU (+)

      Features:

      38967.jpg
      • 4HP, single slot CPU with passive cooling
      • Scalable processor speed, Intel Core 2 Duo up to 2.53 GHz
      • Support of latest PSB performance with 1066 MHz
    • CP-ASM10-PSB
      Suitable for OEMs who require robust, cost-effective communication platforms (+)

      Features:

      • High performance and reliability
      • Use with Kontron´s PICMG 2.16-compliant CompactPCI boards and this reliability will significantly increase
      • Equipped with a PICMG 2.16-compliant packet switching backplane with redundant hot-swap Ethernet switch cards
    • CP6011
      A 6U, CompactPCI processor board (+)

      Features:

      15938.jpg
      • Intel Pentium M 745 processor at 1.8 GHz (and future speeds) or low-power Pentium M at 1.1 GHz
      • Intel E7501 chipset
      • Two SODIMM sockets support up to 2 Gbytes of memory with ECC
    • CP-ASM6-PSB, 6U Packet Switched System
      PICMG 2.16-compliant packet switching backplane (+)

      Features:

      22155.jpg
      • Two H.110 telephony buses, six slot each
      • Three redundant hot-swap power supplies
      • Three hot-swap 150 cfm fans [...]
    • DT64
      PMC expansion slot (with PIM support) (+)

      Features:

      • IPMI support
      • PICMG 2.16 Compliant
      • Dual Gigabit Ethernet controllers
    • AM4510
      The Kontron AM4510 SATA storage AMC modules use Intel's leading SSD for Native Serial Advanced Technology Attachment (SATA) hard disk drive (+)

      Features:

      43547.jpg
      • Enhanced performance, reliability, ruggedness, and power savings
      • Since there are no rotating platters, moving heads, fragile actuators, unnecessary pinup time, or positional seek time that can significantly slow down the storage subsystem, the Intel X25-E SATA SSD enables fast read/write access times and significant I/O, as well as performance improvement when compared to rotating media
      • Will be offered with a 64 GB storage capacity and will be compatible with Kontron's family of AdvancedTCA processor and carrier blades as described by the PICMG AMC.0 R2.0 and AMC.3 R1.0 specifications
    • 400-H33E
      Three 5.25-inch front accessible external drives (+)

      Features:

      • 18-inch depth industrial 4U platform
      • Optional two internal 3.5-inch drives
      • Accommodate PICMG 1.2 P4 SBC, operating temperature up to 50 degree C
    • XL1x00 Series
      Flexible, cost effective platforms (+)

      Features:

      • Backplane options include H.110 on J4 and PICMG 2.16 configurations
      • Designed for telecom, telephony, network infrastructure, or military equipment manufacturers, XL1100 (1U), XL1200 (2U), XL1300 (3U), and XL1400 (4U) have already been delivered with Kontron 6U Intel and PowerPC processors, PMC, and I/O boards [...]
    • CP-ASM10-PSB, 10U PICMG 2.16 compliant Compa
      High power hot swap fans with 3 m/s ( average ) (+)

      Features:

      • up to 4 power supplies ( 1000 Watt )
      • 14 node slots within two 7 slot CompactPCI segments
      • 2 switch slots for Gigabit Ethernet Switches
    • ROCKET/CP3-16
      A 3U, 16-port serial card for CompactPCI (+)

      Features:

      • Developed with the Kontron CP302 CPU board and the CP-ASM-4 CompactPCI chassis
      • Provides up to 16 high-speed RS-232 or RS-422 connections from a single CompactPCI expansion slot
      • Conforms to the PICMG 2.0 R3.0 specification [...]
    • ETXexpress-CD
      ETXexpress is the module concept of the new open standard COM Express by PICMG (+)

      Features:

      30225.jpg
      • With Intel Core Duo processor and Intel Core Solo processor
      • Two serial ATA for high-speed drives, eight USB 2.0 for fast peripherals
      • Up to five PCI Express x1 lanes and PCI Express graphic x16 lanes
  • Avnet Electronics Marketing  (5)
    • CP2040/2140
      A CompactPCI packet switching backplane rear transition module (+)

      Features:

      • Standard CompactPCI 6U form factor
      • Enables PICMG 2.16 Ethernet for Sun Microsystem's Netra CP2040 or CP2140 boards
      • Switches between standard and cPSB configurations
    • ComputeNode4U cPSB
      A PICMG 2.16-based, carrier-grade, CompactPCI chassis (+)

      Features:

      • Eight slots total; one slot for dual 3U Ethernet switches, one system slot, and 6 I/O slots, all with corresponding rear-transition modules
      • PICMG 2.16 compact packet switched backplane architecture
      • Redundant, hot-swappable, 10/100Base-T Layer 2 switches in one 6U CompactPCI slot
    • CP86-N2 (Intel Core i7 cPCI x86 Blade)
      PDSi’s Intel-based CompactPCI x86 Processor Blade (CP86-N2) provides a robust, high-performance general purpose compute platform for use in CompactPCI PICMG 2.16 systems (+)

      Features:

      • Intel-based CompactPCI blade server utilizing Intel’s 22nm processor technology
      • Intel Core i7-3612QE, i7-3615QE
      • Up to 16GB, ECC, Unbuffered, DDR3,1066 / 1333 MHz Memory
    • AdvancedTCA Product Line
      Fully telco-grade PICMG 3.x compliant (+)

      Features:

      30254.jpg
      • Meets NEBS requirements including cooling, noise, and shielding
      • A platform for building carrier-grade telecom applications supporting five-nines (99.999 percent) availability
      • High-density/high-performance computing environment
    • AMD Socket S1
      PDSI's AMD Socket S1 COM Express Module (COMX-S1) is a low-cost, compact, embeddable computing core with the capability to drive a broad range of OEM applications (+)

      Features:

      44294.jpg
      • Built around AMD's x86-based Socket S1 processors, it enables 64-bit computing at a progression of performance levels from the ultra low-power AMD Sempron 2100+ (perfect for fanless applications) to the dual-core muscle of the AMD Turion X2 TL62
      • The Computer-on-Module design is fully compliant with PICMG COM Express Type 2 specifications, offering a large variety of interfaces to cover the needs of most embedded applications
      • The AMD M690/SB600 chipset provides I/O versatility, with interfaces for high-speed data, audio, high-resolution graphics, and more
  • PT  (15 of 18)
    • CPC5505 PICMG 2.16 SBC
      Single slot 6U single board computer (+)

      Features:

      20495.jpg
      • 1.8 GHz Intel Pentium M processor
      • Intel 6300ESB I/O Controller Hub
      • 400 MHz front side bus
    • AMP5095 7U PICMG 2.16 Platform
      Part of the company's Advanced Managed Platform offering (+)

      Features:

      19609.jpg
      • 7U, 19-in, CompactPCI PICMG 2.16 platform
      • Ten hot-swappable, 6U, standards-based slots
      • Eight payload slots
    • CPC5900
      The CPC5900 is a high availability NASor SANstorage blade solution for CompactPCI, PICMG 2.16 systems supporting 800 GB of storage (+)

      Features:

      33606.jpg
      • Each blade features two 3.5" enterprise SATA hard drives with both board-level and drive-level hot-swap for complete flexibility, high reliability, and high storage capacity
      • The onboard high-performance PowerPC processor operates on Performance Technologies' NexusWare CGL 4.0 registered/ POSIX compliant Linux development environment
      • Block Disk I/O is supported over iSCSI for SAN applications and File I/O is supported using NFS and SAMBA for NAS applications
    • Advanced Managed Platforms
      PICMG 2.16 application-ready platforms encompass broad range of award-winning switches, single board computers, I/O cards, and enabling software (+)

      Features:

      33605.jpg
      • Intelligent Shelf Management
      • Integrated NexusWare CGL 4.0 Registered and POSIX-compliant Linux
      • Single and dual core SBCs
    • CPC358 8-Port WAN Communications Adapter
      The CPC358 is an eight port serial communications processor designed to operate in CompactPCI® systems as a peripheral or in a PICMG® 2.16 chassis as a stand-alone communications system (+)

      Features:

      14828.jpg
      • It provides OEMs, integrators and end users with a high performance platform for use in server farms or datacom/telecom applications
      • Featuring the Motorola MPC8255 PowerQUICC II™ processor, the CPC358 can independently process protocols such as X.25, Frame Relay, LAPD and Radar Receiver in an Internet/WAN environment
      • In Telecom applications, the CPC358 will also support MTP-2 on all eight links
    • AMP5085 12U Advanced Managed Platform
      A 12U, 19”, PICMG® 2.16 platform (+)

      Features:

      14115.jpg
      • 21 slots; 18 node slots, two 10/100/1000 PICMG 2.16 redundant fabric slots, and two 3U redundant PICMG 2.9 IPMI-based ISM slots
      • Four hot-swappable, redundant host slots for active/active or active/standby control-plane operation
      • 12 64-bit peripheral slots with H.110 telephony bus and rear-panel I/O
    • AMP5086 12U PICMG 2.16 Advanced Managed Platform
      Part of the company's Advanced Managed Platform offering (+)

      Features:

      18355.jpg
      • 12U, 19-Inch rack-mount enclosure 21 hot-swappable, 6U, standards-based slots
      • 18 node slots
      • No CompactPCI bus
    • CPC5910
      The CPC5910 is a high-performance, high availability SATA storage expansion blade for CompactPCI® PICMG® 2.16 systems supporting one 800 GB of storage (+)

      Features:

      29809.jpg
      • Each blade features two 3.5" enterprise-class SATA hard drives with board- and drive-level hot-swap for complete flexibility, high reliability, and high storage capacity
      • The CPC5910 connects to the high-performance CPC5564 64-bit Single Board Computer or the CPC5900 IP Storage Blade to provide additional storage capacity
      • High-density 6U x 2-slot storage expansion blade
    • CPC6303 250W Hot-Swap AC Power Supply
      A 250W, hot-swap AC power supply (+)

      Features:

      14620.jpg
      • Hot-swap N+1 load sharing
      • Combined total of 40A for the +5V and +3.3V outputs (no minimum load restrictions)
      • Protection features include output overvoltage protection, output overcurrent protection, and overtemperature protection
    • CPC6600 24-port PICMG 10/100/1000 TX Ethernet Switch
      A 6U, CompactPCI, Gigabit Ethernet switch (+)

      Features:

      15082.jpg
      • 24 10/100/1000BASE-T ports
      • Wire-speed layer2/layer3 routing
      • Dual 44-Gbps switching speed
    • CPC396 Dual T3/H.110 TDM Circuit Switch
      Carrier-grade dual DS-3 communications interface for 6U CompactPCI systems (+)

      Features:

      36918.jpg
      • Motorola MPC8260 PowerQUICC II processor, integrated communications functionality managed by an MPC603e PowerPC core
      • PICMG 2.16-compliant (capable of operating in conventional CompactPCI chassis or packet switching backplane configurations)
      • Dual 10/100 Ethernet
    • CPC300 Advanced PTMC Carrier Blade
      An advanced PTMC carrier blade that allows systems integrators to create a custom blade by populating it with PTMC modules that meet specific application requirements (+)

      Features:

      21981.jpg
      • Providing two PTMC sites that comply with the PICMG 2.15 standard, the CPC300 can be used with a wide array of PTMC modules available today, ranging from telecom I/O cards, DSP cards, or packet processing modules.
      • PICMG 2.16 or standard PCI bus operation
      • 667 MHz PowerPC with L1/L2 cache
    • AMP5088 12U Advanced Managed Platform™
      12U, 19-inch rack-mount enclosure (+)

      Features:

      14114.jpg
      • 21 hot-swappable, 6U, standards-based slots
      • 18 node slots
      • Two 10/100/1000 PICMG® 2.16 redundant fabric slots
    • AMP5091 4U Advanced Managed Platform
      4U, 19-inch rack-mount enclosure (+)

      Features:

      15047.jpg
      • Eight 6U hot-swappable slots (seven node slots, one dedicated switched fabric slot)
      • One hot-swappable intelligent shelf manager slot
      • PICMG 2.16-compliant backplane
    • CPC7301 Intelligent Shelf Manager
      Shelf management ensures maximum service availability in a computing platform by monitoring sensors and predicting failures (+)

      Features:

      16545.jpg
      • 3U, single-slot, Intelligent Shelf Manager (ISM) card for all Performance Technologies platforms
      • Provides centralized management and alarming for system power supplies, fan trays, fabric slots, and node slots
      • Flexible design: Complete SBC with 600 MHz CPU, memory, operating system and peripherals, and upgradeable memory
  • ZNYX Networks  (8)
    • ZX4300P
      A CompactPCI embedded Ethernet switch designed to support the PICMG 2.16 specification for packet-switched backplanes (cPSB) (+)

      Features:

      • Supports operation in both standard CompactPCI chassis and the fabric slots for chassis designed to support the PICMG 2.16 cPSB specification
      • Several rear transition modules available to support five through 24 10/100 egress ports
      • Non-blocking, line-rate switching performance
    • ZX4500P
      An extensible managed switch for PICMG 2.16 cPSB chassis (+)

      Features:

      • 6U PICMG 2.16 fabric slot compliant
      • Twenty-four 10/100 Fast Ethernet ports
      • Two 1000 Mbytes/sec Gigabit Ethernet ports
    • ZX5000 PICMG 3.0 GigE Base Fabric Switch
      A 16-port AdvancedTCA Base Fabric switch based on the Intel IXE5416 switch silicon (+)

      Features:

      • Provides Gigabit Ethernet service for 12 payload slots
      • Uses the ZNYX Networks OpenArchitect 3 running on its embedded MPC8255 to provide complete and flexible switch management
      • Three switch egress ports
    • ZX6000/7000 PICMG 3.0 / 3.1 ATCA Hub Board
      24-port (ZX6000) or 48-port (ZX7000) Gigabit Ethernet nonblocking switch fabric (upgradable) (+)

      Features:

      20403.jpg
      • 16-slot chassis support for base interface
      • PICMG 3.1 Option 1 & 2 support
      • Four (ZX6000) or two (ZX7000) PTMC Option 5 slots
    • ZX7000 PICMG 3.0/3.1 GigE Switch Fabric,PTMC
      A 48-port AdvancedTCA Hub board / PTMC Carrier, providing switched Gigabit Ethernet service for up to 14 node boards via the PICMG 3.0 Base Interface and PICMG 3.1 Fabric Interface (+)

      Features:

      • Enables high-density solutions with the addition of onboard PMC/PTMC sites
      • Linux-based OpenArchitect 3 runs on the embedded Freescale MPC8270VR, providing a comprehensive package for the management of Layer 2 and Layer 3 packet switching
      • VLAN management and Layer 2-7 packet classification are also included with a user-friendly interface
    • ZX7300
      The ZX7300 is a PICMG 3.1 payload Ethernet switch with four 10 Gigabit 24 Gigabit Ethernet ports (+)

      Features:

      • Two of the 10 Gigabit ports are connected to the ATCA fabric, so the ZX7300 can implement a fully redundant break-out network from within the ATCA chassis
      • Egress ports are RJ45 for Gigabit Ethernet and SFP+ for 10 Gigabit Ethernet
      • The hub switches can be any PICMG 3.1 Option 1 or 9 devices such as the ZNYX ZX7250
    • ZX4920P
      6U PICMG 2.16 Fabric slot compliant (+)

      Features:

      • 4 port Rear Transition Module Available
      • 10/100/1000 Mbps Ethernet
      • OpenArchitect Switch Management
    • ZX6000 PICMG 3.0/3.1 Base Fabric, PTMC
      A 24-port AdvancedTCA Hub board / PTMC Carrier, providing switched Gigabit Ethernet service for up to 14 node boards via the PICMG 3.0 Base Interface (+)

      Features:

      • Tightly integrated modular switching platform
      • Enables high-density solutions with the addition of onboard PMC/PTMC sites
      • Linux-based OpenArchitect 3 runs on the embedded Freescale MPC8270VR, for the management of Layer 2 and Layer 3 packet switching
  • One Stop Systems Inc.  (7)
    • Pentium M CPU
      Pentium M 2.0 GHz, 1.8 GHz, or 1.6 GHz system/peripheral CPU board, up to 2 GB DRAM, 4HP (XX=GHz) (+)

      Features:

      32654.jpg
      • 6U
      • Part number: OSS-61M-T-XX
      • Intel E7501 chipset
    • HW400c/2
      MPC7447A PowerPC processor, 1.0 GHz (+)

      Features:

      21950.jpg
      • Two CT Bus enabled PTMC sites (PT2MC or PT5MC)
      • High speed non-blocking Gigabit Ethernet switch
      • Dual node Gigabit Ethernet (PICMG 2.16 cPSB)
    • MAX Express Dual Xeon System Host Board (SHB)
      Dual Intel Xeon processors with the Intel E7520 chipset (+)

      Features:

      30446.jpg
      • Compatible with PICMG 1.3 backplanes
      • Provides PCI Express interfaces to the backplane
      • Compatible with the SHB Express (PICMG 1.3) specification
    • OSS-ELB-SHB
      PCI Express x4 Expansion Link Board that fits into the system slot of an SHB Express (PICMG 1.3) compliant backplane in a downstream expansion chassis (+)

      Features:

      30577.jpg
      • Two x4 PCI Express (10 Gbps) connectors on slot cover
      • Upstream/downstream lane active LEDs on slot cover
      • Two x8 and one x4 PCI Express links through the PICMG 1.3 card edge connector
    • Pentium D/Pentium 4 System Host Board
      The MAX Express dual-core system host board is a graphics-class, PICMG 1.3 SHB that offers flexibility, performance and value (+)

      Features:

      30574.jpg
      • Pentium D dual core processor
      • Provides one x16 PCIe link and one x4 PCIe link
      • Direct connect video option via the chipset's Intel Graphics Media Accelerator 950
    • dspPTMC-6415
      Scalable, high-performance single-width PTMC module (+)

      Features:

      • Up to eight TI TMS320C6415 (C6415) fixed-point DSPs
      • PICMG 2.15 standard interface options simplify integration to base platform architecture
      • Extended CT Bus supports up to 4,096 timeslot TDM interface [...]
    • 2U PCI Rackmount Enclosure
      2U high x 17”W x 23”D (+)

      Features:

      • 300W ATX power supply
      • Six-slot passive backplane, with two PICMG slots and four PCI slots
      • Two 5.25” drive bays
  • I-Bus Corporation  (9)
    • Continuon 8U/CHP
      A PICMG 2.16 Gigabit Ethernet blade server (+)

      Features:

      16604.jpg
      • IBC280x system master SBC with single or dual low-power processors
      • Up to 16 IBC 280x server blades
      • Two PICMG 2.16-compliant fabric switch boards
    • 8U CHP
      An 8U, PICMG 2.16-compliant, 8+8+2-slot split backplane, CompactPCI NEBS compute farm platform (+)

      Features:

      14522.jpg
      • 4 to 16 I-Bus IBC2800x long life cycle single board computers
      • Two industry-standarn PICMG 2.16 Layer 3 managed switches
      • Fully IPMI compliant system management controller with SNMP software options
    • C0814
      A 8U CompactPCI enclosure (+)

      Features:

      11270.jpg
      • Up to 14 hot-swap SBCs, four hot-swap SCA SCSI hard drives, and four 200W hot-swap power supplies
      • NEBS compliant
      • Includes three individually hot-swappable blowers and a hot-swappable fan array in a redundant push-pull configuration
    • 8U CHS
      An 8U, CompactPCI, PICMG 2.16-compliant, 8+8+2-slot split backplane, NEBS compute farm platform (+)

      Features:

      • 2 to 16 UltraSPARC IIe long life cycle single board computers
      • Two industry-standard PICMG 2.16 Layer 3 managed switches
      • Optional fully IPMI compliant system management controller and baseboard management controller/peripheral management controller with SNMP software options
    • nFUZION-8U/CHP
      A CompactPCI, dual Pentium III-based NEBS compute platform (+)

      Features:

      • Suitable for server farms, render farms, content-on-demand platforms, and voice services platforms
      • PICMG 2.16 compliant
      • Red Hat Linux and Windows 2000 operating system support
    • Continuon 8U/CHS
      A SPARC based blade compute farm platform (+)

      Features:

      16605.jpg
      • IBC2809 SBC with 650 MHz Ultra SPARC IIi processor, Solaris operating system, and up to 3 GB of RAM
      • Up to 16 IBC 280x server blades
      • Two PICMG 2.16-compliant fabric switch boards
    • IBC-2802
      A PICMG 2.16-compliant SBC (+)

      Features:

      • 6U, 4HP
      • 800 MHz Intel mobile Tulatin processor
      • Micron Copperhead/Coppertail server chip set
    • IBC 2801
      A 6U, CompactPCI, system-master or satellite CPU board (+)

      Features:

      • Single or dual Intel low-voltage Pentium III processors at up to 800 MHz with 512 Kbytes L2 cache
      • Micron Copperhead/Coppertail chipset
      • Up to 2 Gbytes of DDR synchronous DRAM at 266 MHz
    • IBC 2804
      A PICMG 2.16 blade server (+)

      Features:

      21687.jpg
      • Single Pentium 4 Processor-M at up to 2.0 GHz
      • 32 KB L1 instruction and data cache
      • 1 MB L2 Advanced Transfer cache
  • Radstone Embedded Computing  (2)
    • CPX24
      Rugged 24-port fully managed GbE switch with PICMG 2.16 compliance (+)

      Features:

      29931.jpg
      • 10 Gigabit uplink ports for expansion
      • Layer 2/3 switching with advanced support for VLANs, QoS, and IPv6
      • PICMG 2.16 compliant
    • CP1A
      High-performance 6U CompactPCI processor (+)

      Features:

      24861.jpg
      • Fully rugged air/conduction-cooled
      • Extensive Radstone software support
      • PowerPC 7448
  • Crystal Group, Inc.  (1)
    • CS9000HS
      A rackmount computer for rugged applications and OEM customization (+)

      Features:

      • Two 5.25” drive bays and one internal 3.5” drive bay
      • Faceplate houses the power switch, CPU reset, alarm reset, power LED, and hard drive activity LED
      • Hot-swap, front-accessible 400W power supplies with an audible alarm and LEDs
  • ACTIS Computer  (3)
    • CSBX-6440AS/533-128
      A PowerPC-based single board computer (+)

      Features:

      16724.jpg
      • IBM PPC440GX processor at 533 MHz
      • 128 Mbytes of DRAM and 16 Mbytes of Flash
      • Dual IEEE-1386.1, 32/64-bit, 33/66 MHz PMC module interfaces
    • XCOM-9347
      Highly integrated solution specially designed to meet PICMG COM.0 specification (+)

      Features:

      38196.jpg
      • Low-power high-performance PowerPC processor in compact COM Express
      • PowerQUICC II Pro MPC8347E 400 MHz
      • Up to 2 GB DDR2 SDRAM on SODIMM socket
    • KCAC-0320
      Highly integrated solution, measuring 160 mm x 160 mm (6.3” x 6.3”) (+)

      Features:

      38199.jpg
      • Designed to meet COM Express PICMG COM.0 standard requirements
      • Small form factor COM Express carrier
      • Compact and Basic COM Express type-III Modules support
  • Dynatem, Inc.  (8)
    • CPM1 CompactPCI/PICMG 2.16 Pentium-M Single
      CompactPCI and PICMG 2.16 compatible (+)

      Features:

      23033.jpg
      • Available in convection and conduction-cooled versions
      • Supports two PMC sites in a single-slot configuration
      • Supports 1.8 GHz Pentium M, low-power 1.4 GHz Pentium M, and ultra-low power 1.0 GHz Celeron M
    • EPD
      Core Duo based 6U CompactPCI Express Single Board Computer (+)

      Features:

      35955.jpg
      • 6U CompactPCI Express form factor per PICMG EXP.0 system slot specification
      • PICMG 2.16 compatible
      • Pentium Core Duo processor @ 1.66 GHz
    • CPD2 CompactPCI/PICMG 2.16 Core-Duo/Core™2 Duo Single Board Computer
      CPCI and PICMG 2.16 compatible (+)

      Features:

      • Intel® CoreTM2 Duo Mobile Processor L7400 @ 1.5 GHz or T7400 @ 2.16 GHz
      • Supports two PMC sites, one of which optionally supports XMC modules
      • E7520 Chipset for PCIe support and high memory bandwidth
    • CPD
      Core-Duo based rugged 6U CompactPCI/PICMG 2.16 Single Board Computer (+)

      Features:

      38077.jpg
      • Intel Pentium Core 2 Duo Processor at 1.5 GHz or 2.16 GHz
      • Available in conduction-cooled versions for rugged applications
      • Supports two PMC sites, one of which optionally supports XMC modules
    • CRM1 Rugged SBC
      Dynatem introduces a rugged, low-power Pentium M CPU in a single CompactPCI slot (+)

      Features:

      30374.jpg
      • Low-power Intel Pentium M processor at 1.4 GHz (-40 °C to +71 °C), extended temperature versions (-40 °C to +85 °C) available at 1.0 GHz
      • Ruggedized, VITA 301.1-2002 compliant, conduction-cooled versions with heat sink, stiffener bar, and wedge locks are available
      • 855GME and 6300ESB chipset
    • CPM1
      High-performance, low-power Pentium M CPU in a single CompactPCI slot (+)

      Features:

      24770.jpg
      • Low-power Intel Pentium M processor at 1.4 GHz or 1.8 GHz with 855GME and 6300ESB chipset
      • Single-slot CompactPCI operation with up to 16 GB bootable CompactFlash
      • PICMG 2.0 R3.0 compliant with PLX non-transparent, universal PCI-PCI bridge provides 64-bit CompactPCI transfer rates at 66 MHz
    • CPM 6U cPCI Pentium M SBC & blade
      Pentium M based CompactPCI card (+)

      Features:

      • Universal bridge that can be a System Slot Controller or a Peripheral SBC as well as a PICMG 2.16 compatible blade
      • Up to 1 GB of DDR-266 SDRAM at 2.136 GBps
      • Intel's 855GME GMCH provides DVO and VGA graphics
    • CRM Rugged 6U cPCI Pentium M SBC & blade
      Rugged Pentium M based CompactPCI card with Universal bridge that can be a System Slot Controller or a Peripheral SBC as well as a PICMG 2.16 compatible blade (+)

      Features:

      • Up to 1 GB of DDR-266 SDRAM at 2.136 GBps
      • Intel's 855GME GMCH provides DVO and VGA graphics
      • Intel's 6300ESB provides IDE at 100 MBps
  • Suntron  (1)
    • cPCI Communications Platform
      A 9U X 19-inch industrial chassis (+)

      Features:

      • 300-watt CompactPCI power supply
      • Integrated, replaceable fan tray
      • 8-slot 6U, H.110, CompactPCI backplane
  • Lineage Power  (1)
    • MPS Series
      The MPS Series is designed to provide 400 W/600 W of power and power management functionalities supporting the MicroTCA shelf per the PICMG MicroTCA Base Specification (+)

      Features:

      38867.jpg
      • 400 W/600 W MicroTCA DC/DC Power Module supporting 12 AdvancedMCs, 2 Cooling Units and 2 MCHs
      • Compliant to PICMG MicroTCA.0 (Rev 1.0) and PICMG HPM.1 Firmware Upgrade (Rev 1.0)
      • Wide Input voltage range: -36 Vdc to -75 Vdc
  • Creative Electronic Systems  (2)
    • TNS 4080
      A network processor-based, CompactPCI, real-time processor board (+)

      Features:

      16532.jpg
      • ATM with support of AAL0, AAL1, AAL2, and AAL5
      • IP (v4 + v6) over SONET or TDM (PPP, PPP-MUX, MLPPP)
      • OC12, OC3, E1/T1/J1, J2, and DS3/E3/T3 physical interface support
    • TNS 4880
      Network processor-based, CompactPCI, real-time processor board (+)

      Features:

      19805.jpg
      • ATM with support of AAL0, AAL1, AAL2, and AAL5
      • IP (v4 + v6) over SONET or TDM (PPP, PPP-MUX, MLPPP)
      • OC12, OC3, E1/T1/J1, J2, and DS3/E3/T3 physical interface support
  • AICSYS Inc.  (1)
    • RCK-203Br: PICMG 1.3 2U rackmount chassi
      AICSYS In., design the ideal compact 2U chassis solution capable of a multitude of configurations. The RCK-203BR is the one of our proud showcase product to the 2U Rackmount Chassis Product Line. With a depth of only 450mm (17 inches), the RCK-203BR is ideal for applications require a shorter rack depth or even a vehicle mount. Both PICMG 1.0: BP-0602P-2U & BP-0604P-2U and PICMG 1.3: BPE-0502P-2U & BPE-0605-2U Butterfly Backplanes can be installed into the RCK-203BR for use with a wide variety of PCI as well as PCIe SBC's and Add-on Cards resulting in a very robust system (+)

      Features:

      • Supports Full Size SBC PICMG 1.0 (BP-0602P-2U) and (BP-0604P-2U) butterfly backplane
      • â—?Supports Full Size SBC PICMG 1.3 (BPE-0502P-2U) and (BPE-0605E-2U) butterfly backplane
      • â—?Supports (2) 3.5" External HDD with Mobile rack, (1) Slim Optical Drive
  • LV Power  (4)
    • LVDC350W3U1-X-Y
      A CompactPCI DC Power supply (+)

      Features:

      • 3U, 1 slot, 4 HP
      • Electrical quad output: +5v@30A, +3.3v@50A, +12v@4A, -12v@1A
      • 375 W total power
    • Power Supplies
      Advanced power conversion topologies (+)

      Features:

      33500.jpg
      • Focus on the needs of the CompactPCI, server, and storage markets
      • Standard and custom DC input CompactPCI supplies from 200-350 W with complete IPMI functionality
      • High density, high efficiency CompactPCI supplies, specifically designed to allow maximum free airflow through the chassis
    • LV350DC3U1SF
      DC/DC 350 Watt: 3U x 1 slot package (+)

      Features:

      • New and Unique DC Model
      • Very high output in a 3U x 1 slot package
      • PICMG Spec 2.11 Compatible
    • LV350DC3U2IPMISF
      DC/DC 350 Watt: 3U x 2 slot package (+)

      Features:

      • New and Unique DC Model
      • Very high output in a 3U x 2 slot package
      • PICMG Spec 2.11 Compatible
12/6/21 15:23
Close

Subscribe to AdvancedTCA updates