AdvancedTCA

Showing results for: picmg advancedtca
Refine AdvancedTCA companies and products:
advancedtca 40 gbps advancedtca carrier blade advancedtca anniversary advancedtca specification picmg advancedtca 2011 advancedtca 40g xtca advancedtca architecture advancedtca 10 gbe advancedtca servers advancedtca blades long term evolution advancedtca all-ip advancedtca slots ipmi advancedtca advancedtca extensions advancedtca chassis advanced telecom computing architecture picmg advancedtca joe pavlat atca
Click on any vendor
to see a listing of
picmg advancedtca related products.
  • Agilent Technologies  (3)
    • Agilent E2944A ATCA + AMC probing solutions
      Passive AdvancedTCA probe board of the System protocol Tester for ASI and PCI Express protocol analysis (+)

      Features:

      • Passive probe board with AMC support
      • Active AdvancedTCA probe board for the ASI and PCI Express protocl simulus Exerciser solution
      • Support for PCI Express protocol analysis via AdvancedTCA/AMC form factor
    • E2944A
      Enables nonintrusive capturing of ASI transactions between two line cards in the AdvancedTCA-based backplane (+)

      Features:

      • Alternatively, the exerciser can be used to emulate one of the line cards of the test setup
      • Suitable for bring-up and debug, validation, and compliance testing of AdvancedTCA form factor-based ASI boards and backplanes [...]
    • E2943A
      Active probe board (+)

      Features:

      • Plugs into the AdvancedTCA backplane to emulate real ASI designs or topologies
      • Offers analyzer and exerciser support for the AMC standard
      • Suitable for bring-up and debug, validation, and compliance testing of AdvancedTCA form factor-based ASI boards and backplanes [...]
  • Alliance Systems  (4)
    • A-14000 14U Powerful, High-Reliability ATCA Server
      14U rack-mount server (+)

      Features:

      20411.jpg
      • 14-slot, fully passive, PICMG 3.1 backplane with dual-dual star routing topology
      • Supports 12 node slots for single or dual Intel Xeon CPU or other AdvancedTCA boards
      • Supports up to two 16-port ZNYX PICMG 3.0 Gigabit Ethernet Base Fabric Switches with 10/100/1000 Mbps Ethernet
    • AdvancedTCA Servers
      Standards-based, open architecture meets reliability and scalability needs of next-generation networks (+)

      Features:

      • 14U, 441mm-deep (17.44"), rackmount enclosure
      • 14-slot, fully passive, AdvancedTCA-compliant backplane with dual-dual star routing topology
      • Support for up to 12 single or dual Intel Xeon AdvancedTCA CPU boards supporting up to 2.0 GHz on an Intel E7501 chipset and 4 Gbytes of PC2100 ECC Registered DDR RAM
    • A-4000 Ultra-Compact 4U ATCA Platform
      Smallest AdvancedTCA system, 4U form factor (+)

      Features:

      21328.jpg
      • Five-slot dual-dual or star full mesh backplane
      • 70 mm rear transition module support
      • Dual DC input with redundant removable PEMs, circuit breaker protection, and optional dual AC input PEMs
    • A-5000 Compact 5U ATCA Platform
      5U rack-mountable AdvancedTCA system with five-slot full-mesh backplane (+)

      Features:

      21329.jpg
      • Supports two Intel shelf managers with bussed IPMB and three node slots for single or dual Intel Xeon 2.8 GHz CPU or other AdvancedTCA boards
      • Dual – 48 Vdc with power indicators or an AC version with 750 W power supply and dual hot-swap power supplies removable from the front with replicated mesh backplane
      • Meets NEBS requirements for cooling, noise, and shielding; providing two 290 CFM fans for cooling up to 200 W per board and designed for easy access to top board with removable top cover and cover plate
  • AppliedMicro  (3)
    • PRS C192X Cell Switch Fabric Interface
      Fabric interface mezzanine for AdvancedTCA I/O blades such as AMCC's “nP3710 ATCA” blade and RadiSys' “Promentum ATCA-7010” blade (+)

      Features:

      • Features the AMCC's PRS C192X fabric interface, a queue manager device of AMCC's PRS switch fabric family, the shared-memory cell switches that provide best-in-class features for carrier-grade switching applications
      • In star topology implementations, operates in conjunction with an AdvancedTCA Cell Switch blade like AMCC's PRS40G-ATCA and supports from 2.5 Gbps (overspeed factor of 2) to 4 Gbps (Ethernet) of user bandwidth
      • In mesh topology implementations, up to 8 AdvancedTCA I/O blades equipped with the PRS C192X FIC mezzanine can interoperate without any centralized fabric switch: one or two blades can support up to 10 Gbps of user bandwidth, the other blades operating at 2.5 Gbps (overspeed factor =2)
    • PRS40G-ATCA Cell Switch
      AdvancedTCA switch blade featuring AMCC's PRS 80G Switch Fabric device, a carrier grade shared-memory cell switch that provides best-in-class features (+)

      Features:

      23896.jpg
      • Compliant with PICMG 3.0 AdvancedTCA standard and PICMG 3.6 Cell Switching (draft) specification, an AdvancedTCA fabric interface for carrier grade applications
      • Offers 40 Gbps of user bandwidth with an overspeed factor of 2 and provides full switch blade redundancy with load balancing and cell lossless maintenance switchover
      • Supports 12 payload slots, each supporting between 2.5Gbps (overspeed factor of 2) and 4 Gbps (Ethernet) of user bandwidth
    • PRS Cell Switching Devices
      Family of carrier grade shared-memory cell switch fabric devices for switching solutions from 5 Gbps up to 320 Gbps of user bandwidth (+)

      Features:

      • Enables standard based designs complying with PICMG 3.6 Cell Switching (draft) specification, an AdvancedTCA fabric interface for carrier grade applications
      • Perfect fit for the convergence of voice, video, and data traffic, thanks to its efficient QoS, bounded transit delay, and guaranteed precedence of time sensitive traffic over other traffic types
      • High priority traffic can be made fully preemptive, while alternate options can be used to guarantee bandwidth to lower priority traffic, even under high traffic load conditions, thanks to an efficient in-band congestion management mechanism
  • Artesyn Embedded Technologies  (15 of 34)
    • Centellis 4100 ATCA 10GbE Platform
      AdvancedTCA platform (+)

      Features:

      33451.jpg
      • AdvancedTCA shelf to deliver 5-nines availability into central office environments
      • 13U/19" chassis with 14 vertical blade slots
      • Fault-resilient design to minimize hardware induced failures
    • Centellis 3406 ATCA Communications Server
      AdvancedTCA Communications Server (+)

      Features:

      33059.jpg
      • Fully integrated and verified AdvancedTCA based communications server
      • RoHS (5 of 6) compliant
      • 14-slot, 19", 12.5U form factor
    • Centellis 3600 ATCA Communications Server
      AdvancedTCA Communications Server (+)

      Features:

      33060.jpg
      • Fully integrated and verified AdvancedTCA based communications server
      • RoHS (5 of 6) compliant
      • 16-slot, 23", 12.5U form factor
    • ATCA-C121 AdvancedTCA AMC Carrier Blade
      The Emerson Network Power ATCA-C121 is a 10 Gigabit AdvancedTCA AMC carrier blade and is available for the Centellis 4000 series of communications servers (+)

      Features:

      36473.jpg
      • The flexibility of AMC technology provides application developers the ultimate flexibility in defining and allocating compute resources, telecom I/O and network connectivity
      • Modular design – four mid-size, single wide AdvancedMC (AMC) sites
      • Enables scalable and distributed computing
    • ATCA-7301
      High performance AdvancedTCA processor blade for data and control plane applications (+)

      Features:

      34907.jpg
      • 2.16 GHz Intel Core 2 Duo processor
      • Onboard 24-port Gigabit Ethernet switch
      • AMC.0, AMC.1, and AMC.2 compliant with two mid-size AMC sites
    • ATCA-S201
      AdvancedTCA carrier blade (+)

      Features:

      42545.jpg
      • AdvancedTCA storage blade with four (4) mid-size AdvancedMC slots
      • Additional storage via RTM mounted hard disk drives (HDDs)
      • Up to 876 GB of storage per blade/RTM combination
    • ATCA-7221 AdvancedTCA Processor Blade
      High performance processor blade with SMP (+)

      Features:

      32574.jpg
      • RoHS (6 of 6) compliant
      • Dual 2.8 GHz Intel Xeon LV processors
      • Complete software operating environment including OS
    • AXP640 40G AdvancedTCA Shelf
      Specifically designed to address carrier-grade requirements desired by the telecommunications industry as well as high availability enterprise environments. (+)

      Features:

      185979506184183131.jpg
      • The heart of the AdvancedTCA (ATCA) shelf is the 40G backplane. This allows for 40Gbps communication across the PICMG 3.1 fabric interface
      • Using this technology, it is possible to upgrade to 40GbE capable switch and payload blades in the future without replacing the shelf infrastructure
      • Equally important are the thermal characteristics of the AXP640 shelf. It is designed to exceed the CP-TA B.4 and newly defined PICMG thermal profile, the highest level possible
    • ATCA-S120
      The ATCA-S120 is a cost-effective, direct attached storage solution for in-shelf AdvancedTCA applications (+)

      Features:

      41657.jpg
      • AdvancedTCA storage blade with four (4) mid-size AMC slots
      • Additional storage via RTM mounted HDDs
      • Up to 876 GB of storage on a single blade
    • FlowPilot ATCA Platform Software
      FlowPilot(TM) software for the ATCA-F140, the Emerson Network Power high performance, high bandwidth 40G ATCA hub blade, adds packet forwarding techniques beyond standard built-in switching and routing protocol support. FlowPilot allows you to manage the switching hardware to achieve lowest latency, full wire speed packet, and flow context aware packet distribution to and from all processing blades in your AdvancedTCA platform. (+)

      Features:

      231320965142302672.jpg
      • Balance traffic to multiple AdvancedTCA® blades for packet monitoring and processing
      • Maintain flow context and packet sequence
      • Fully transparent for external network elements
    • Centellis 4000 Series ATCA Communications Server
      Series of AdvancedTCA communications servers (+)

      Features:

      33322.jpg
      • Integrate 10 Gbps Ethernet switching, a wide range of payload blades and enabling software
      • Suitable for applications requiring high bandwidth and high performance
      • Portfolio extends from individual blades and modules through fully integrated and validated MicroTCA and AdvancedTCA communications servers [...]
    • FlowPilotâ„¢
      Emerson’s FlowPilot™ software adds packet forwarding techniques beyond the standard switching and routing protocol support built-in to its ATCA-F140 high performance 40G ATCA hub blade. As a high bandwidth traffic flow separator and load balancer, FlowPilot can maintain flow context and packet sequence while separating traffic into application groups. FlowPilot allows you to manage the switching hardware to achieve lowest latency, full wire speed packet, and flow context aware packet distribution to and from all processing blades in your AdvancedTCA platform. FEATURES: High bandwidth traffic flow separator and load balancer ƒBalance traffic to multiple AdvancedTCA® blades for packet monitoring and processing Maintain flow context and packet sequence ƒƒFully transparent for external network elements Separate traffic into application groups Redundant 160G external Ethernet connectivity 480Gbit/s internal bandwidth for packet processing [...] (+)

      Features:

    • ATCA-7150
      High performance processor blade with SMP support (+)

      Features:

      34889.jpg
      • Two, 2.13 GHz Dual-Core Intel Xeon LV processors
      • Multiple software packages including operating systems
      • PICMG 3.0 base interface and PICMG 3.1 Option 1 fabric interface support
    • FlowPilot Packet Balancing Software for ATCA Platforms
      Artesyn’s FlowPilot™ software adds packet forwarding techniques beyond the standard switching and routing protocol support built-in to its ATCA-F140 high performance 40G ATCA hub blade. As a high bandwidth traffic flow separator and load balancer, FlowPilot can maintain flow context and packet sequence while separating traffic into application groups. FlowPilot allows you to manage the switching hardware to achieve lowest latency, full wire speed packet, and flow context aware packet distribution to and from all processing blades in your AdvancedTCA platform. The ability to monitor and process data streams on the fly is appealing in many application areas. Wireline and wireless carriers have an interest to provide contractually agreed services and quality. Enterprises extend their classical firewalls with highly sophisticated intrusion prevention systems. Service providers are interested in statistics about subscriber behaviors. FEATURES: High bandwidth traffic flow separator and load balancer Balance traffic to multiple AdvancedTCA® blades for packet monitoring and processing Maintain flow context and packet sequence Fully transparent for external network elements Separate traffic into application groups Redundant 160G external Ethernet connectivity 480Gbit/s internal bandwidth for packet processing [...] (+)

      Features:

    • Centellis 3000 Series Communications Server
      Centellis 3000 Series of AdvancedTCA communications servers is a carrier-grade common platform for NEPs to develop and deploy existing middleware and applications (+)

      Features:

      32589.jpg
      • Integrated and verified AdvancedTCA communications server
      • 14-slot/19" or 16-slot/23" 12.5U form factors
      • Verified shelf-level thermals and PICMG standard compliance
  • Astute Networks  (1)
  • Avnet Electronics Marketing  (11)
    • ATCA Carrier Cards
      AdvancedTCA carrier cards for integrating CompactPCI and Compact Packet-Switching Backplane (cPSB) cards into an AdvancedTCA environment (+)

      Features:

      • Entry-level AdvancedTCA Base Interface carrier card provides interconnection to the PICMG 3.0-compliant data transport section, 10/100/1000Base-Tx fabric data interconnectivity in a dual star configuration, and an onboard IPMI controller
      • AdvancedTCA Full Mesh carrier card provides complete fabric interface connectivity for any CompactPCI boards,
      • Onboard Gigabit Ethernet switch with full mesh connectivity and alternate topologies including dual star, dual dual star, and limited meshes
    • ATCA-F1 Dual AMD Opteron® Blade PDSi
      The ATCA-F1 blade features two dual-core or quad-core AMD Opteron CPUs for high performance and low power consumption (+)

      Features:

      39364.jpg
      • Up to 32 GB 667 MHz memory
      • An AdvancedMC site and RTM interface provide I/O expansion capability (using PDSi ATCA-RT01)
      • This is a robust general-purpose server platform for telecom, aerospace, military, and enterprise AdvancedTCA systems
    • ATCA-RT01 Advanced RTM w/ Video & Storage
      The ATCA-RT01 provides high reliability SAS storage, VGA video output and additional I/O functionality for AdvancedTCA systems using x86 processor blades from PDSi or Sun Microsystems, plus Sun's Netra CP3260 blade (+)

      Features:

      39363.jpg
      • For telecom, aerospace, and military systems requiring a mix of these compute blades, the ATCA-RT01 can provide a common RTM solution
      • NEBS Level 3 compliant
      • Windows and Linux compatible
    • ATCA-F1 Blade
      Dual AMD Opteron AdvancedTCA blade with RTM Interface is a robust, high-performance general purpose AdvancedTCA compute platform for telecom, miltary, and aerospace applications (+)

      Features:

      39450.jpg
      • Two dual-core or quad-core AMD Opteron CPUs for high-performance and low power consumption
      • Up to 32 GB 667 MHz memory in four DIMM sockets
      • Zone 3 RTM interface provide I/O expansion capability using PDSi ATCA-RT01
    • CP2040/2140
      A CompactPCI packet switching backplane rear transition module (+)

      Features:

      • Standard CompactPCI 6U form factor
      • Enables PICMG 2.16 Ethernet for Sun Microsystem's Netra CP2040 or CP2140 boards
      • Switches between standard and cPSB configurations
    • ATCA-RT01 RTM
      Compatible with PDSi ATCA-F1, Sun Netra CP3220 (x86), and Sun Netra CP3260 (SPARC) AdvancedTCA blades (+)

      Features:

      36877.jpg
      • Onboard SAS storage up to 146 GB - field-removable hard disk drive
      • Front-panel access to onboard LSI SAS controller for connection to redundant storage arrays
      • VGA video - supports resolutions up to 1600 x 1200
    • Xilinx AdvancedTCA Reference Design Kit
      Xilinx 2VP50 or 2VP70 FPGA (+)

      Features:

      20410.jpg
      • CompactFlash programming card
      • PICMG compatible board form factor
      • 128 MB DDR SDRAM
    • AdvancedTCA Reference Design Kit
      Xilinx 2VP50 or 2VP70 FPGA (+)

      Features:

      20419.jpg
      • CompactFlash programming card
      • PICMG compatible board form factor
      • 128 MB DDR SDRAM
    • ATCA-N1 (Dual Intel Xeon E5 ATCA)
      The ATCA-N1 blade is a high performance computing platform that is designed to provide maximum computing, memory and storage flexibility in a single ATCA chassis slot (+)

      Features:

      • Intel-based AdvancedTCA blade server utilizing Intel’s 32 nm processor technology
      • Dual purpose memory sockets enable the use of up to 4 x SATADIMM solid state drives
      • mSATA solid state drive provides flexible expansion storage/boot option
    • AdvancedTCA Product Line
      Fully telco-grade PICMG 3.x compliant (+)

      Features:

      30254.jpg
      • Meets NEBS requirements including cooling, noise, and shielding
      • A platform for building carrier-grade telecom applications supporting five-nines (99.999 percent) availability
      • High-density/high-performance computing environment
    • AMC-A2 PrAMC board
      High performance hot-swappable AdvancedMC processor module conforms to PICMG AMC.0 R2.0 (+)

      Features:

      36003.jpg
      • Supports AMD Athlon single- and dual-core processors with true multitasking for increased performance
      • SOCDIMM socket supports DDR2 667 MHz ECC memory up to 2 GB
      • Up to 8 GB optional onboard microDOC flash for local boot drive
  • Carlo Gavazzi Computing Solutions  (2)
    • ATCA Starter Kit
      A complete AdvancedTCA development system (+)

      Features:

      • Available with a six slot, full mesh backplane that supports the AdvancedTCA PICMG 3.0, 3.1, 3.2, 3.3, 3.4, and 3.5 specifications
      • Supports AdvancedTCA hardware and software testing and development
      • Can be used as a system for proof of concept and customer demonstrations
    • AdvancedTCA Filler Panels
      8U x 6HP form factor (+)

      Features:

      • EMI gasket provided [...]
  • Cinch Connectors, Inc.  (1)
    • AMC compression style mezzanine connector
      Robust compression style mezzanine connector for standard AdvancedTCA platform blades (+)

      Features:

      39494.jpg
      • Meets or exceeds the latest PICMG AdvancedTCA specification, AMC.0 Rev 2, which requires support for data transmissions of up to 12.5 Gbps per channel
      • Highly reliable one-piece stamped contacts, providing seamless carrier board to mezzanine card paths for long-term robust performance
      • The captured individual contacts are designed to provide a low insertion force, with support for wide board planarities and multiple card insertions
  • Comtel Electronics GmbH  (15 of 23)
    • Intelligent 300 W Thermal Load Board
      If you are qualifying high-power blades and you are not sure how airflow test reports apply to you, we have the answers (+)

      Features:

      44436.jpg
      • AdvancedTCA blades are drawing more power and getting denser
      • Comtel Electronics is now offering a way to test the most important characteristic of your AdvancedTCA chassis – temperature
      • Comtel's load board is controlled via any AdvancedTCA compliant shelf manager using standard IPMI commands
    • ATCA CO14N
      Nine-inch rack-mount 13U system (+)

      Features:

      43782.jpg
      • 4-slot 8U front boards and RTM
      • Full Mesh and Dual Star topologies available
      • 4 slot high performance Backplane, 10 Gbps
    • ATCA CO2-3U AC/DC
      19" rack-mount 3U, AC/DC Economy Version (+)

      Features:

      43783.jpg
      • 2 slot replicated full mesh backplane
      • Redundant controller / ShMC in two versions
      • Redundant PEM or Quad 850 W AC Power Supply
    • ATCA CO6-8U Front to Rear cooling
      9" Rack-mounted 7U system – DC Version (+)

      Features:

      43784.jpg
      • 6 slot replicated full mesh backplane
      • NEW – Front to Rear cooling five fans of 80 mm x 80 mm
      • Redundant Controller/ShMC in two versions
    • CO-Pizza 5-Slot Triple Mesh ATCA Shelf
      5 slots electrically and mechanically compliant to the PICMG 3.0 AdvancedTCA specification (+)

      Features:

      18689.jpg
      • Front boards and Rear Transition Module (RTM) assemblies accommodated
      • Rack and Shelf are designed to meet EMC standards
      • Afull function Shelf Management providing FRU Control and Shelf Management Controller (ShMC) functions for the shelf FRU's and for compliant user Board Assemblies
    • 2 slot AdvancedTCA NEBs compliant. CO-2
      19" rack-mounted 3U system (+)

      Features:

      22163.jpg
      • 2 slot horizontal front boards and RTM
      • 2 slot high performance backplane
      • 6.25 Gbps with replicated full mesh fabric connections
    • CO-Pizza 2-Slot Replicated Mesh ATCA Shelf
      2 slots electrically and mechanically compliant to the PICMG 3.0 AdvancedTCA specification (+)

      Features:

      22343.jpg
      • Front boards and Rear Transition Module (RTM) assemblies accommodated
      • Rack and shelf are designed to meet EMC standards
      • A full function Shelf Management providing FRU Control and Shelf Management Controller (ShMC) functions for the shelf FRUs and for compliant user board assemblies
    • 10U Black Star AdvancedTCA Central Office Shelf
      A 10U height for maximum rack density (+)

      Features:

      • A single 2U standalone c module which services two shelves
      • 14 slots electrically and mechanically compliant to the PICMG 3.0 AdvancedTCA specification
      • 14 front boards and 12 Rear Transition Module (RTM) assemblies accommodated
    • ComtelCO2-3U System
      19” rack mounted 3U system (+)

      Features:

      36004.jpg
      • AC / DC Economy AdvancedTCA Version
      • 2 slot horizontal front boards and R
      • 2 slot high performance backplane, 6.25 Gbps with full mesh fabric connections
    • CO-14 DS AdvancedTCA Central Office Shelf
      14 slots electrically and mechanically compliant to the PICMG 3.0 AdvancedTCA specification (+)

      Features:

      18688.jpg
      • Front boards and Rear Transition Module (RTM) assemblies accommodated
      • Rack and Shelf are designed to meet EMC standards
      • Afull function Shelf Management providing FRU Control and Shelf Management Controller (ShMC) functions for the shelf FRU's and for compliant user Board Assemblies
    • ATCA CO2 - 2 Slot 2U
      AdvancedTCA 2U, 2 slot horizontal Central Office Shelf 19" rack mounted or desktop 2U system with redundant PPS ShMC M500, redundant PEM and redundant cooling (+)

      Features:

      34095.jpg
      • 19" two slot horizontal front boards and RTM
      • Redundant PPS ShMC M500
      • Redundant EMC filtered power feeds
    • ATCA CO6 - 6 Slot 5U
      AdvancedTCA 5U, 6-slot Horizontal Central Office Shelf 19" rack mounted or desktop 5U system with redundant PPS ShMC M500, redundant PEM and redundant cooling (+)

      Features:

      34096.jpg
      • 19" 6 slot horizontal front boards and RTM
      • Redundant PPS ShMC M500
      • Redundant EMC filtered power feeds
    • ATCA CO5 - 5 Slot 5U
      AdvancedTCA 5U, 5 slot Horizontal Central Office Shelf (+)

      Features:

      34098.jpg
      • 19" rack mounted or desktop 5U system with redundant PPS M500 Or Motorola M100 ShMC, redundant PEM and redundant cooling
      • 19" 5 slot horizontal Main and RTM
      • 5 slot 10 Gbps Backplane, with replicated full mesh fabric connections
    • ATCA CO14 - 14 Slot 13U
      AdvancedTCA 13U, 14 slot Central Office Shelf 19" rackmount 13U system, dual star and full mesh backplanes topologies (+)

      Features:

      34099.jpg
      • Designed for compliance to NEBS and EN levels
      • 19" 14 slot main and RTM
      • 14 slot 10 Gbps backplane, with dual star topologies fabric connections
    • ATCA CO16 - 16 Slot 13U ETSI
      AdvancedTCA 13U, 16-slot Central Office shelf, ETSI System dual star and full mesh backplanes topologies (+)

      Features:

      34100.jpg
      • Designed for compliance to NEBS and EN levels
      • 19" 16-slot front boards and RTM
      • ETSI 13U (574 mm) system
  • dasan networks  (1)
    • A1200
      DASAN Networks’ A1200 is a single slot Advanced Telecom Computing Architecture (ATCA) packet processing module/blade compliant with PICMG 3.0/3.1 (Option 1 & 9) and PICMG 3.1 R2 (TBD) interface specification. It is ideal for dual-star and full-mesh configurations in 14 slot (EIA cabinet) and 16 slot (ETSI cabinet) systems, it also provides Rear Transition Module (RTM) for fabric and base interface extension. (+)

      Features:

      188954934121124158.jpg
      • PICMG 3.0 compliant base interface switch / PICMG 3.1, Option 1,9 fabric interface switch (1G/10G)
      • PICMG 3.1 R2 (TBD) fabric interface switch (40G)
      • Front Interface : 4 x 1G/10G SFP+ (Base Interface) / 4 x 1G/10G SFP+ (Fabric Interface) / 2 x 40G QSFP (Fabric Interface)
  • ELMA Electronic  (15 of 43)
    • 6-slot ATCA Backplane
      Elma Bustronic Corporation, an industry leading designer and manufacturer of high performance backplanes has announced a 6-slot AdvancedTCA Backplane in a Mesh topology (+)

      Features:

      • The flexible design also allows a Dual Star topology to be implemented
      • The 6-slot AdvancedTCA backplane now features standard MicroTCA connectors used for connections to Elma's IPM Sentry shelf manager
      • The small and dense connector minimizes the space used on the backplane
    • PICMG-based Backplanes
      Backplanes compliant to the PICMG 2.0 (CompactPCI), 2.16 (Ethernet Packet Switching, cPSB), 3.0 (AdvancedTCA), and MicroTCA.0 specifications (+)

      Features:

      330585.jpg
      • Bustronic is the industry leader in PICMG-based backplanes and offers the widest standard selection
      • Our custom backplane expertise in these architectures is second-to-none
      • We also offer the largest selection of PICMG-based system accessories, including load boards, extender cards, air baffles, RTMs, and SerDes test modules. Bustronic's signal integrity studies help ensure the performance of your high-speed backplane design
    • 4U Type 39 ATCA
      A 4U, 5-slot, horizontal AdvancedTCA chassis (+)

      Features:

      14944.jpg
      • Designed to hold five 8U x 280mm blades on 1.2” spacing
      • Rear I/O options for 8U x 70mm cards
      • Chassis versions in both sheet metal and modular packaging designs
    • 5U ATCA Dev. Chassis
      A PICMG 3.0-compliant, horizontal 5U AdvancedTCA development chassis (+)

      Features:

      • 700W AC-input power supply provides 48V at 15A
      • Five-slot AdvancedTCA backplane supports implementing Full Mesh, Replicated Mesh, and Dual Star topologies
      • Backplane has options for plugging with the IPM Sentry shelf manager
    • 2nd Gen Carrier-Grade AdvancedTCA Chassis
      2nd generation 13U AdvancedTCA system platform for carrier-grade applications (+)

      Features:

      33320.jpg
      • The unit has gone through advanced thermal simulation and testing and meets the requirement of at least 20-30 percent airflow in each of the 4 regions of the AdvancedTCA blade
      • This ensures even airflow distribution and helps to prevent hot spots
      • The chassis is geared for full NEBS compliance, including pluggability and redundancy for all FRUs [...]
    • 2nd Generation AdvancedTCA handle
      2nd Generation AdvancedTCA handle that does not require assembly (+)

      Features:

      • The one-piece handle simply has two screws to attach it to the panel/PCB
      • Engaged/disengaged with a unique slide-motion solution
      • Prevents the handle from being accidentally tripped or bumped into and broken
    • 4U ATCA Chassis
      A 4U, 5-slot horizontal AdvancedTCA chassis with allotments for the Elma IPM Sentry shelf manager (+)

      Features:

      • 5-slot mesh ATCA backplane configuration compliant to PICMG 3.0 specifications
      • Two 2mm HM connectors allow direct plugging of the shelf manager into the backplane; two 3-pin headers for cabling to the IPM Sentry
      • Optional redundant connections of the IPMB signals
    • 13U ATCA chassis
      AdvancedTCA platforms come in 4U, 5U, 12U, and 13U heights (+)

      Features:

      18111.jpg
      • Include a wide range of backplane and shelf management
      • Three standard backplane options through backplane subsidiary, Bustronic
      • Backplanes include a 5-slot replicated mesh, a 14-slot dual star, and a 14-slot mesh with a section below the cards for plugging power entry modules and fan trays
    • 2nd gen 5U AdvancedTCA Chassis
      Elma Electronic Inc., a global manufacturer of electronic packaging products, has upgraded its 5U AdvancedTCA chassis with full redundancy (+)

      Features:

      38556.jpg
      • The system platform offers dual redundant fan trays, shelf managers, and A/C power supply options
      • The 2nd Gen 5U AdvancedTCA Chassis features side-to-side cooling via plug-in fan trays with dual 170 CFM fans with Pulse Width Modulation control. The redundant push/pull configurations of the fans offer higher levels of reliability
      • The fans reach the back of the chassis for cooling the rear I/O slots
    • ATCA front panel
      AdvancedTCA front panels that offer a more precise and finished look (+)

      Features:

      37001.jpg
      • Elma offers the extruded AdvancedTCA panels in two versions
      • The first version has a .5 mm deep channel for overlays (typically a printed lexan substrate with pressure-sensitive adhesive on the back side) to be placed
      • The other version is for silk-screening/painting and does not have a channel
    • 5U AdvancedTCA chassis
      5U AdvancedTCA chassis with full redundancy (+)

      Features:

      31171.jpg
      • Dual redundant fan trays, shelf managers, and A/C power supplies
      • Optional shelf managers
      • Optional A/C power
    • 2-Slot cPCI
      2-slot CompactPCI backplane (+)

      Features:

      32313.jpg
      • Conforms to PICMG basic specification 2.0 R3.0
      • PICMG Hot Swap specification 2.1 R1.0
      • Versions conforming to PICMG 2.16 are available
    • ATCA backplanes
      AdvancedTCA backplanes have routing implemented for radial Intelligent Platform Management Bus (IPMB) signals (+)

      Features:

      36140.jpg
      • Radial IPBM provides dual segment access to every IPM controller even when only one shelf manager is present or operational
      • This is an important option for AdvancedTCA systems to provide higher reliability and redundancy
      • The backplanes also feature 14-slots with a Dual Star routing topology
    • PXI Backplane
      3U, 8-slot PXI Backplane (+)

      Features:

      • Compliant to PICMG 2.0 R3.0 CPCI Core Specification and PICMG PXI SA R2.1
      • Connector for status signals "FCON" and Fastons for supplying HDD and fans
      • PICMG 2.1 R2.0 Hot Swap Specification and PICMG 2.9 R1.0 System Management Specification
    • 2-slot ATCA Backplane
      A two-slot AdvancedTCA backplane (+)

      Features:

      21240.jpg
      • Point-to-point mesh topology
      • 10-layer stripline design with optimized routing through signal integrity studies
      • Includes connectors for direct plugging of the IPM Sentry shelf manager from Elma, or wired connections to other shelf managers
  • Elma Electronic - Systems  (1)
    • ATCA7365 SystemPak
      High performance, multiprocessing system platform designed to address compute-intensive requirements in command and control data center applications (+)

      Features:

      52856.jpg
      • Combines the high performance multiprocessing of an integrated AdvancedTCA platform with a ruggedized design capable of withstanding the high shock and vibration found in rugged mobile transport applications
      • Successfully tested to withstand a 36" drop shock test per MIL-STD-810G
      • Three AdvancedTCA processor blades, each with two six-core Intel processors as standard
  • ESO Technologies  (3)
    • ATCA-Tester
      Automated software tool testing AdvancedTCA equipment compatibility with respect to PICMG 3.0 specification system management requirements (+)

      Features:

      21323.jpg
      • 72 test scenarios in 1.2.0 version based on PICMG 3.0 / IPMI 1.5 specifications and on AdvancedTCA interoperability workshops test scenarios
      • Test categories (depending on test target) include RMCP network, IPMC, FRU based (AdvancedMC ready), Sensors, Chassis, Shelf manager
      • Simultaneous test of several IPMC/FRUs in parallel possible
    • ATCA -Tester
      AdvancedTCA Tester (+)

      Features:

      • Automated software tool testing AdvancedTCA equipment compatibility with respect to PICMG 3.0 specification system [...]
    • HA Computing Platform Design & Integration
      Training, architecture consultancy, software development, and integration services (+)

      Features:

      20425.jpg
      • AdvancedTCA standard
      • System management (IPMI, HPI, SNMP)
      • HA capabilities
  • F9 Systems, Inc.  (7)
    • ASI-SIG SI Test Kit
      ASI-SIG Tx/Rx SignalBlade AdvancedTCA Test Kits (+)

      Features:

      31217.jpg
      • Provide engineers with the hardware needed to verify the signal integrity characteristics of AdvancedTCA Physical Layer signals and backplane designs
      • Use the Single SignalBlade AdvancedTCA ASI Validation Test Kit measures AdvancedTCA backplane Impedance and coupled Near End Crosstalk (NEXT) – (Open source Destination)
      • Monitors the active Tx and Rx signals across an AdvancedTCA backplane to insure ASI SIG protocol and signal quality
    • THERMALBLADE
      AdvancedTCA compatible design (+)

      Features:

      19806.jpg
      • Provides a thermal load of up to 200 W per slot from a redundant AdvancedTCA –48 VDC backplane
      • Operates over the entire –36 to –72 VDC voltage range without damage to thermal board
      • Mimics aerodynamics of a typical high performance board
    • Fulcrum9 Tx/Rx BenchBlade
      AdvancedTCA compatible design using the right angle male HM-ZD connector for bench testing AdvancedTCA hub and node card (+)

      Features:

      20405.jpg
      • Provides four (4) Transmit and four (4) Receive pairs to test a complete AdvancedTCA channel
      • Edge-launch SMAs for superior bandwidth and ease of test cable attachment
      • Differential impedance of 100 W ±5%
    • F9 Systems Tx/Rx SignalBlade
      AdvancedTCA compatible design using the HM-ZD backplane connector (+)

      Features:

      20406.jpg
      • Provides four (4) Transmit and four (4) Receive pairs to test a complete AdvancedTCA channel
      • Edge-launch SMAs for superior bandwidth and ease of test cable attachment
      • Flexible connector alignment (because connector guides are removed), allows all signals to be easily probed
    • ATCA TX/RX SIGNALBLADE
      AdvancedTCA compatible design using the HM-ZD backplane connector (+)

      Features:

      19807.jpg
      • Provides four Transmit and four Receive pairs to test a complete AdvancedTCA channel
      • Edge-launch SMAs for superior bandwidth and ease of test cable attachment
      • Differential impedance of 100 ohms +/- 5%
    • F9 Systems ThermalBlade
      AdvancedTCA compatible design (+)

      Features:

      20431.jpg
      • Test air flow, power load, and thermal performance of your chassis, logic cards, and backplane
      • Provides a thermal load of up to 200 watts per slot from a redundant AdvancedTCA 48 VDC backplane
      • Operates over the entire -36 to -72 VDC voltage range without damage to thermal board
    • F9 Systems RTM ThermalBlade
      AdvancedTCA compatible design (+)

      Features:

      20432.jpg
      • Provides thermal load of up to 50 watts per slot
      • Operates over the entire -36 to -72 VDC voltage range without damage to thermal board
      • Mimics aerodynamics of a typical high performance board
  • GE Intelligent Platforms, Inc.  (13)
    • AT922 ATCA Hub
      48 1000BASE-T ports in the ATCA 8U form factor; IPMI compliant according to PICMG 3.0 specification (+)

      Features:

      19049.jpg
      • Dual PMC slots compliant to PICMG 2.15 (dual GbE connected to the fabric)
      • Four 10/100/1000BASE-T copper and four 1000Base-T fiber ports to the front panel
      • Four 10/100/1000BASE-T copper ports to the rear I/O
    • A10200
      The A10200 AdvancedTCA single board computer features dual Intel Xeon 5600/5500 Series quad- or six-core processors and up to 64 Gbytes of DDR3 SDRAM memory (+)

      Features:

      • Dual sockets support up to two Intel Xeon 5600/5500 Series long-life processors with Intel 5520 chipset
      • Intel L5638 and L5518 Xeon NEBS processors
      • Up to 8 DDR3-SDRAM VLP DIMMs
    • TELUM 1001-O3M
      An Advanced Mezzanine Card (AdvancedMC) for Asynchronous Transfer Mode (ATM) communications (+)

      Features:

      • Provides full-duplex OC-3 ATM front I/O capabilities to an AdvancedTCA system
      • Intel 41210 serial-to-parallel PCI bridge to the PCI Express bus to communicate with the host processor on an AdvancedTCA system
      • Complies with ATM Forum UNI 3.1 and TM 4.0 and is based on an advanced ATM segmentation and reassembly (SAR) controller designed to optimize the PCI Express bus interface
    • A10200
      The A10200 ATCA single board computer features dual Intel Xeon 5600/5500 Series quad- or six-core processors and up to 64 Gbytes of DDR3 SDRAM memory (+)

      Features:

      • Dual sockets support up to two Intel Xeon 5600/5500 Series long-life processors with Intel 5520 chipset
      • Intel L5638 and L5518 Xeon NEBS processors
      • Up to 8 DDR3-SDRAM VLP DIMMs
    • TELUM 1001-DE DS3/E3 Wan Adapter AdvancedMC
      Full duplex DS3/E3 interface (+)

      Features:

      22476.jpg
      • AMC.1 & PCIe Rev 1.0 compliant
      • AdvancedTCA AdvancedMC hot swap compliant
      • Intelligent Platform Management Interface (IPMI)
    • VMICPCI-P303
      Up to 16 slots, 6U single wide (4 HP) CompactPCI (CPCI) slots (+)

      Features:

      • +5V, 33 MHz PCI bus interface
      • 32 or 64-bit buses available
      • User-settable geographic address for each physical slot
    • ATCA-7820 CPU Blade
      AdvancedTCA single board computer with two dual-core Intel Xeon LV 2.0 GHz processors and flexible memory options (+)

      Features:

      32180.jpg
      • Utilizes two dual core Intel Xeon LV 2.0 GHz processors which provide four high-performance processor cores per platform
      • Provided with 2 MB of L2 cache, Up to 8 GB DDR-2 400 SDRAM with ECC
      • Support for a Serial ATA connection using the AdvancedMC site
    • AT920
      A 24-port layer 2/3 AdvancedTCA switch (+)

      Features:

      16101.jpg
      • Carrier-grade switch
      • 16 ports compliant to PICMG 3.0
      • Up to eight Gigabit Ethernet I/O ports
    • DS3/E3
      AMC.1 and PCIe Rev. 1.0 compliant (+)

      Features:

      • Full duplex DS3/E3 interface
      • AdvancedTCA AMC Hot Swap compliant
      • Intelligent Platform Management Interface (IPMI)
    • CT9
      6U CompactPCI all-in-one CPU (+)

      Features:

      18532.jpg
      • PICMG 2.16 server blade
      • Intel Pentium M Processor
      • 600 MHz to 1.8 GHz
    • AT-AMC2
      AdvancedTCA carrier for 2-4 AMC.2 modules (+)

      Features:

      30784.jpg
      • AMC.2 compliant AdvancedTCA carrier blade that is available with two double-wide or four (single-wide) bays
      • Support up to four extended full-height, single-width AdvancedMCs or up to two extended full-height, double-width AdvancedMCs
      • Serial fabric interface to each of the AT-AMC2's AdvancedMC slots complies with the AMC.2 Specification for the Common Options and Fat Pipes regions
    • AT-AMC1
      AdvancedTCA carrier board for 2-4 AMC.1 modules (+)

      Features:

      30783.jpg
      • AdvancedTCA carrier blade that is available with two double-wide or four single-wide bays
      • The carriers support up to four extended full-height, single-width AdvancedMCs or up to two extended full-height, double-width AMCs
      • Serial fabric interface to each of the AT-AMC2's AMC slots complies with the AMC.1 and AMC.2 Specifications for the Common Options and Fat Pipes regions
    • AT2-5800
      IP Packet Processor AdvancedTCA blade (+)

      Features:

      35852.jpg
      • Dual Cavium OCTEON Plus 16-core CN5860-SCP processors with up to 750 MHz
      • SPI-4.2 interface for processor interconnection
      • Up to 8 GB of high-speed DDR2 packet memory per processor
  • Infranet  (14)
    • USPS-3200 Series
      AdvancedTCA 3.0 and 3.1 option 2 compliant switch blade (+)

      Features:

      35822.jpg
      • 48 GbE service for interfacing with node boards via Base Interface and Fabric Interface
      • Compliant with PICMG 3.1 option 2 and USPS-3200-9 option 9, each of which enables user to excel in demanding and diverse systems
      • USPS-3000 series: USPS-3000B designed for Base Interface only and USPS-3000F supporting Fabric Interface
    • USPS-3000
      Omni Device USPS-3000 is a fully AdvancedTCA 3.0 and 3.1 compliant switch blade that provides 24 Gigabit Ethernet base interface ports and 24 Gigabit Ethernet fabric interface ports (+)

      Features:

      32133.jpg
      • Fully PICMG 3.0/3.1 option 1 compliant switch fabric
      • 24 GbE ports for base I/F and 24 GbE ports for fabric I/F
      • Support up to 16 slot AdvancedTCA shelf
    • USPS-3200
      Fully AdvancedTCA 3.0 and 3.1 option 2 compliant switch blade (+)

      Features:

      32134.jpg
      • Optionally support option 9 for 2 specific slots
      • Fully PICMG 3.0/3.1 option 2 compliant switch fabric
      • Support partially PICMG 3.1 option 9 (10 GbE) for specific 2 node slots optionally
    • UniPlat-3000DS/GM
      12U, 14-slot AdvancedTCA shelf with 2 shelf manager, 3 fan tray, 2 PEM, and dual star backplane or group full mesh backplane (+)

      Features:

      32131.jpg
      • Fully PICMG 3.0 compliant AdvancedTCA shelf
      • 12U height, 14 slots
      • Support dual star midplane, optionally grouped full mesh structure
    • USPS-3000 : ATCA switch fabric
      AdvancedTCA compliant switch fabric (+)

      Features:

      21288.jpg
      • PICMG 3.0 and 3.1 compliant
      • Base I/F: 24 Gigabit Ethernet ports
      • Fabric I/F: 24 Gigabit Ethernet ports [...]
    • USPB-3000 : ATCA Backplane
      AdvancedTCA compliant backplane (+)

      Features:

      21285.jpg
      • 14 slots
      • Dual star
      • Full mesh [...]
    • UniPlat-3005RM
      Fully PICMG 3.0 compliant AdvancedTCA Shelf (+)

      Features:

      32132.jpg
      • 5U height, 5 slots
      • Support replicated mesh midplane
      • One fan tray with redundancy fans
    • UniPlat-3000 : ATCA system platform
      AdvancedTCA compliant system platform (+)

      Features:

      • Chassis
      • Backplane
      • Fan Tray
    • USPS-3000 : ATCA Ethernet Switch Card
      AdvancedTCA compliant Ethernet Switch Card (+)

      Features:

      21282.jpg
      • Base I/F : 24 Gigabit Ethernet ports
      • Fabric I/F : 24 GE ports
      • Layer 2 and optionally Layer 3 function
    • UniPlat-2000 : PICMG system platform
      PICMG 2.16 compliant system platform (+)

      Features:

      21286.jpg
      • Chassis
      • Backplane
      • Power module backplane
    • PICMG 2.16 Switch Fabric - USPS
      PICMG 2.16 compliant switch fabric (+)

      Features:

      • 24 FE and 2 Gigabit Ethernet ports L2/L3
      • Web based Management SNMP [...]
    • USPB-2000 : PICMG Backplane
      PICMG 2.16 compliant backplane (+)

      Features:

      21284.jpg
      • 21-slot, 2 slots for switch fabric, 1 slot for CMM
      • Accommodates 1+1 3U size CMM [...]
    • USPS-2000 : PICMG Ethernet Switch Card
      PICMG 2.16 compliant switch fabric card (+)

      Features:

      21281.jpg
      • 24 Fast Ethernet and 2 Gigabit Ethernet ports
      • Layer 2 and optionally Layer 3 function
      • Remote S/W upgrade
    • USPC-2000 : PICMG SBC
      PICMG 2.16 compliant SBC (+)

      Features:

      21283.jpg
      • Intel Pentium 4-M based CPU card
      • 2 Gigabit Ethernet ports for switch interface
      • 1 FE port for management
  • Intel  (14)
    • Intel NetStructure® MPCMM0001
      Chassis Management Module (+)

      Features:

      • Compliant with AdvancedTCA specification
      • Provides the interface between platform hardware and system software, supporting higher level management interfaces
      • The CMM is the single point of administration and information for all the components in an AdvancedTCA compliant chassis
    • Intel NetStructure® MPCBL0001 High-Performance Single Board Computer
      High-Performance Single Board Computer (+)

      Features:

      • Compliant with AdvancedTCA specifications
      • Can achieve greater performance levels than have been previously supported on standards-based blade products
      • Designed to interoperate with the entire family of Intel's AdvancedTCA-compliant products, including the AdvancedTCA-compliant 14U shelf, and with third party building blocks meeting the PICMG 3.0 specification [...]
    • Intel NetStructure® IXB2800 3G Boards
      Integrated, high-performance, high-density data plane solutions for R99, R4, and R5 3G Universal Mobile Telecommunications System (UMTS) Radio Network Controllers (RNCs) (+)

      Features:

      • Intel IXP2800 network processors with RNC data plane software in an AdvancedTCA form factor
      • Single, high-performance IXP2800 processor executing MIPS-intensive 3G radio resource protocols can enable dramatic system footprint and cost reductions for next-generation RNC solutions because a single IXP2800 replaces multiple DSPs and ASICs.
      • Additional processing power is available for future 3G features
    • NetStructure MPCBL0040
      A single board computer that is part of a series of high-compute boards introducing powerful multicore architecture compliant with the Advanced Telecom Computing Architecture (AdvancedTCA) specification (+)

      Features:

      • Performance boost from multicore processor technology enables superior subsystem scalability and greater density
      • More subscribers/transactions per board allow more network elements in an AdvancedTCA chassis, improving system scalability
      • Intel® E7520 chipset provides direct connection between the MCH, PCI Express component, and AdvancedMC modules
    • Intel NetStructure MPCBL0001
      Single Board Computer compliant with the AdvancedTCA specification (+)

      Features:

      • Dual Low Voltage Intel Xeon 2.0 GHz processor with a 400 MHz system bus
      • Intel NetBurst microarchitecture
      • Designed to interoperate with Intel's AdvancedTCA products and with third-party building blocks meeting the PICMG 3.0 specification
    • Intel NetStructure MPCBL0001
      A high-performance single board computer compliant with AdvancedTCA specifications (+)

      Features:

      • Designed to interoperate with the entire family of Intel's AdvancedTCA-compliant products and with third-party building blocks meeting the PICMG 3.0 specification
      • 2.0 GHz with 400 MHz system bus provides outstanding value
      • Integrated 512 KB L2 Cache
    • MPCBL0001 High-Performance SBC
      Compliant with AdvancedTCA specification (+)

      Features:

      • Dual Low Voltage Intel Xeon processors (2.0 GHz)
      • 400 MHz system bus
      • Designed to interoperate with AdvancedTCA products from Intel and with third-party building blocks meeting the PICMG 3.0 specification
    • Intel NetStructure® MPCMM0002
      Chassis Management Module (+)

      Features:

      • Slim form factor AdvancedTCA board
      • Compliant with the PICMG 3.0 specifications
      • Designed to work with a number of third-party chassis
    • MPCMM0002 Chassis Management Module
      Slim form factor AdvancedTCA board (+)

      Features:

      • Compliant with the PICMG 3.0 specifications
      • 600 MHz Intel 80321 I/O processor with Intel XScale technology
      • 64 M Flash
    • MPCMM0001 Chassis Management Module
      Ccompliant with the AdvancedTCA specification (+)

      Features:

      • Provides the interface between platform hardware and system software, supporting higher level management interfaces
      • Utilizes the Intelligent Platform Management Interface (IPMI) standard, via an innovative hybrid dual-star management topology, to gather and report metrics for specific modules or boards within the chassis
      • Multiple interfaces provide choice and flexibility for TEMs
    • Intel NetStructure® IXB28504xGbEFS
      Secure Packet Processing Blade (+)

      Features:

      • High-performance AdvancedTCA blade
      • Intel IXP2850 network 1.4 GHz processor
      • Built-in support for IPsec encryption algorithms
    • Intel NetStructure MPCBL0010 Single Board Computer
      A flexible, high performance Single Board Computer (+)

      Features:

      • Compliant with the AdvancedTCA specification
      • Two AMC sites
      • 2.8 GHz Low Voltage Intel Xeon processor with execute disable, enhanced halt state, and thermal monitoring
    • IXB28504xGbEFS Secure Packet Processing Blad
      High performance secure packet processing blade (+)

      Features:

      • AdvancedTCA form factor
      • Intel IXP2850 1.4 GHz network processor with built-in support for IPsec encryption algorithms
      • Suitable for telecommunications grade applications requiring secure multi-gigabit data rates in IP Multimedia Subsystem (IMS), wireless, and other edge/access environments
    • MPCBL0020
      Intel Pentium M processor 760 (2.0 GHz) (+)

      Features:

      • Chipset: Intel E7520 Memory Controller Hub
      • PCI Express
      • Dual Star Gigabit Ethernet base and fabric
  • JBlade  (2)
    • Compass System Manager
      Remotely monitor the health and status of multiple AdvancedTCA shelves with JBlade Compass, an intuitive Graphical User Interface (GUI) providing access to a maximum of 160 AdvancedTCA blades (+)

      Features:

      • Compass simplifies user interaction with a point and click GUI that displays Blade and AdvancedMC population with illuminated LEDs, minimizing operator visits to the shelf
      • It provides graphics for backplane fabric FRU alarms
      • Graphs for temperature and voltages show historical data, aiding problem resolution
    • Compass
      JBlade Compass is an AdvancedTCA system manager for remote monitoring and control of AdvancedTCA shelves, AdvancedTCA blades, and AdvancedMCs (+)

      Features:

      39282.jpg
      • JBlade Compass monitors temperature, voltage and fans speeds and prioritizes alarms based on FRU and severity
      • Compass provides commands for rebooting blades, shelves, setting FRU power allocation and sequence
      • Fan speeds can be set to predefined levels
  • JumpGen Systems  (3)
    • PRA-200 ATCA Node
      The PRA-200 ATCA Node Blade is a single-slot AdvancedTCA blade supporting 1 or 2 Intel low voltage Xeon Quad-Core Processors and either AdvancedMC, PMC, or SATA HD expansion options (+)

      Features:

      38940.jpg
      • 1 or 2 low-power Intel Xeon processor L5408 (quad-core) running up to 2.13 GHz or Intel Xeon processor L5238 (dual-core) up to 2.66 GHz or other Intel Xeon processors 5400, 5300, 5200, and 5100 Series
      • Intel 5100 Memory Controller Hub supporting Front Side Bus up to 1333 MHz
      • Up to 32 GB of ECC DDR2 memory running at 667 MHz
    • T6M-100 PrAMC
      64-core processor card is a high-performance Processor AdvancedMC (PrAMC) card designed for use in AdvancedTCA or MicroTCA systems (+)

      Features:

      38844.jpg
      • TILE64 processor with 64 cores running at 700 MHz
      • 2 GB of ECC DDR2 memory running at 800 MHz
      • Up to 8 GB of persistent memory
    • T6M-100
      AdvancedMC (PrAMC) platform (+)

      Features:

      38569.jpg
      • TILE64 processor with 64 cores running at 700 MHz
      • 2 GB of ECC DDR2 memory running at 800 MHz
      • Up to 8 GB of persistent memory
  • Kaparel Corporation  (15)
    • ATCA System Platforms
      High-speed backplanes,10 Gbps, designed for advanced switching, Ethernet, InfiniBand, S-RapidIO Star Fabric (+)

      Features:

      • Shielding for NEBs, FCC, and EU standard
      • Stainless steel construction,corrosion resistance
      • AdvancedTCA System solutions available 13U, 12U, and 5U configurations
    • High Speed Backplanes
      Off-the-shelf and custom high-speed backplane solutions (+)

      Features:

      • Faster-to-market solutions for embedded applications
      • VME, CompactPCI, Switch Fabric, and AdvancedTCA architectures
      • Utilize quality standards and procedures and continuous improvement
    • Backplanes
      CompactPCI backplanes designed to accommodate rear mount , low profile bridge modules (+)

      Features:

      41088.jpg
      • CPCI- PICMG 2.16 Ethernet Packet Switching Backplane specification
      • CPCI- PICMG 2.17 Star Fabric Specification
      • CPCI- CompactPCI H.110
    • AdvancedTCA Faceplates
      A complete range of PICMG 3.0 AdvancedTCA face plates, filler panels and handles in brushed stainless steel (+)

      Features:

      • Each Face Plate comes with 2 locking latches attached
      • Face Plates provide for the I/O interface
      • Filler Plates are used in place of unused/reserved slots and provide for EMI protection and air-flow management
    • AdvancedTCA Face Plates
      A range of PICMG 3.0 AdvancedTCA face plates, fillers, panels, and handles in brushed stainless steel (+)

      Features:

      19851.jpg
      • Available with optional EMC gasketss; adhesive foam, adhesive finger stock, or mechanical snap-in styles
      • Handle locking device acts as a grounding feature and securely locks the handle under seismic Zone 4 conditions (NEBS Level 3) [...]
    • AdvancedTCA Developer Chassis
      AdvancedTCA development platform (+)

      Features:

      15027.jpg
      • Intended for developers of telecom systems designed to comply with the PICMG 3.0 specification
      • Provides a 19” open sided bench top with a Kaparel full-mesh or dual star architecture 14-slot backplane
      • The 13U x 84HP chassis accommodates 14-Slots of 8U x 6HP x 280mm front boards and 8U x 6HP x 70mm rear-transition modules
    • AdvancedTCA Shelf
      Redundant brushed stainless steel AdvancedTCA shelf (+)

      Features:

      33889.jpg
      • Complies with the PICMG 3.0 specification
      • Integrated sub-rack, dual hot swap fan tray
      • 19" rack-mount, 482.6 mm, 5U, 400 mm deep
    • Customizable AdvancedTCA Shelf
      A Full-Mesh 13U, 14-slot AdvancedTCA shelf (+)

      Features:

      17468.jpg
      • Complies with the PICMG 3.0 specification
      • Accommodates 14 slots of 8U x 6HP x 280 mm boards and 14 slots of 8U x 6HP x 70 mm Rear Transition Modules (RTMs)
      • A one-piece card guide platform also provides EMI shielding
    • 23000 Series
      A series of 3U PXI backplanes (+)

      Features:

      16945.jpg
      • PXI R2.0, PICMG 2.1 R1.0 Hot Swap Specification, and PICMG 2.8 draft specification compliant
      • One 64-bit CompactPCI bus and three to seven peripheral slots
      • Supports 32/64-bit, 33/66 MHz (66 MHz only in five or less slots)
    • RiCool-2 Blower
      1U rack height Hot Swap PICMG 3.0 compliant, redundant design (+)

      Features:

      • Stainless steel housing
      • Provides cooling of up to 200 W per slot in AdvancedTCA Shelf
      • 65 dB(A) at 100 percent speed (free blowing), 60 dB(A) at 70 percent speed (free blowing)
    • AdvancedTCA Enclosures
      Case solutions in 5U, 12U, 13U, or custom (+)

      Features:

      34485.jpg
      • Climate control concepts up to 200 W/board
      • High speed backplanes up to 10 Gbps
      • Systems available up to Level 5 for AdvancedTCA and MicroTCA
    • AdvancedTCA Backplane
      14-slot fabric interface with full mesh interconnect (+)

      Features:

      20385.jpg
      • Base interface with dual star interconnect
      • Split power distribution (odd slots on A1/B1, even slots on A2/B2)
      • Bused IPMI-0 connections (optional configuration allows for radial connections)
    • AdvancedTCA Enclosure Family
      Rittal incorporates innovative components to produce reliably available systems up to level 5 for AdvancedTCA and MicroTCA (+)

      Features:

      30136.jpg
      • Everything is fully assembled, ready to run and individually configured
      • And the same naturally applies equally for CompactPCI, VME, and VME64x
      • Case solutions in 5U, 12U, 13U, or cube design
    • Optimized Microcomputer Systems
      Rittal supplies complete systems for VME, VME64x, CompactPCI, and AdvancedTCA (+)

      Features:

      35282.jpg
      • New generation conforms to RoHS directive
      • All systems equipped as standard with scalable electronics for monitoring temperature, voltage, and fan speed
      • All standard systems are fully assembled, wired, tested, and available at short notice [...]
    • Kaparel MicroTCA
      Complies with PICMG MicroTCA 0.R1.0 and AMC 0.R1.0 (+)

      Features:

      33887.jpg
      • System availability of at least 99.999
      • Hot swap compatible
      • 19" rack-mount, 482.6 mm, 5U, 200 mm deep
  • LCR Electronics  (3)
    • ATCA Rugged Chassis
      Available in 3-slot, 5-slot, and 14-slot (PICMG 3.0 REV 2) (+)

      Features:

      42070.jpg
      • Available in 14-slot (PICMG 3.0 REV 3)
      • Dual 6-slot enclosure to allow for two fully independent, EMI isolated,AdvancedTCA systems to function in a single 12U x 19-inch rack-mountable chassis that meets PICMG 3.0 REV 3 [...]
    • ATCA Chassis
      LCR Elextronics has expanded its existing line of AdvancedTCA (ATCA) systems to include three new rugged chassis (+)

      Features:

      42964.jpg
      • All of the new models conform to MIL-STD-810 Method 514.5 and MIL-STD-167 Type 1, para. 5.1 for vibration as well as MIL-STD-810 Method 513.5 for acceleration
      • The Gemini, built to PICMG 3.0 Rev. 2, and the KBWD, built to PICMG 3.0 Rev. 3, are both 13U chassis available in dual-star 14-slot versions or in mesh 3-, 5- and 7-slot configurations
      • The PICMG 3.0 Rev. 3, the 12U KBWD-2 features a dual 6-slot design, with each electrically isolated, full-mesh backplane featuring four node slots and two hub slots
    • Rhino ATCA Chassis
      Rugged carrier grade 13U AdvancedTCA 14-slot chassis (+)

      Features:

      • Vertical, rack, and slide mountable
      • Dual star backplane
      • 200 W cooling per blade
  • LeCroy Corporation  (1)
  • NEI  (3)
    • A-5000 ATCA System
      A standards-based high-reliability server featuring superior performance, advanced I/O capacity, and easy manageability (+)

      Features:

      34755.jpg
      • 5-slot AdvancedTCA system with full-mesh topology for 3.125 Gbps throughout
      • Three node slots available for AdvancedTCA single board computers, or other AdvancedTCA blades
      • Dual 16-port ZNYX PICMG 3.0 GbE base fabric switches and dual Intel Shelf Managers
    • A-13000 ATCA System
      NEI's A-5000 and A-13000 carrier-grade AdvancedTCA platforms offer customers a standardized architecture for next-generation communications applications (+)

      Features:

      34760.jpg
      • These products have passed rigorous testing required by today's telecommunication organizations
      • NEI AdvancedTCA systems offer scalability and greater than 5-nines (99.999%) availability
      • With standardized packet-switched backplane topologies, node-based switching for board communications and centralized management with IPMI, the NEI A-Series family is the right architecture for carrier-grade next-generation communication applications
    • MMP for ATCA
      Dialogic Multimedia Platform for AdvancedTCA (+)

      Features:

      33776.jpg
      • Supports multimedia processing and includes voice, conferencing
      • Supports 250 to 500 universal ports with audio transcoding
      • Supports a variety of low-bit-rate and wireless coders
  • NMS Communications Corporation  (2)
    • MG 7000A ATCA Media Processor
      480 IVR, fax, conferencing, VoIP, 3G 324M video sessions (+)

      Features:

      20393.jpg
      • 16 T1/E1 ports
      • Call control for CAS, ISDN, and SIP
      • Single slot AdvancedTCA solution
    • MG 7000A
      MG 7000A AdvancedTCA Media Processor Blade is the ideal platform for network-based applications including IP media servers and enhanced service platforms for mobile voice applications (+)

      Features:

      38655.jpg
      • High-speed IP packet handling
      • Dual Gigabit Ethernet for AdvancedTCA Switch Fabric
      • Dual 10/100/1000-Base-T Ethernet for AdvancedTCA Base Fabric
  • PennEngineering  (1)
    • Faceplate Fastening
      The PEM Type TPXS pin meets the AdvancedTCA PICMG 3.0 specifications for a 3 mm alignment pin. The 15˚ tapered point makes engaging the mating hole easy (+)

      Features:

      34704.jpg
      • Meets the AdvancedTCA PICMG 3.0 specifications
      • PEM captive floating retention screws, with M3 threads and 0.51mm radial float, offer an AdvancedTCA style mounting solution
      • Captive screws provide the added advantage of an anti cross-thread feature making thread engagement quick and easy
  • Pigeon Point Systems  (11)
    • BMR-AVR-ATCA Board Management Reference Design
      A reference design for an AdvancedTCA IPM Controller based on the widely used Atmel AVR microcontrollers (+)

      Features:

      • Includes a schematic for the hardware and source code for the firmware
      • When integrated into a customer's AdvancedTCA board, these components form a compliant and interoperable IPM Controller
      • Tested for interoperability at PICMG-organized AdvancedTCA/AMC Interoperability Workshops
    • BMR-H8S-ATCA Board Management Reference Design
      A reference design for an AdvanceTCA IPM Controller based on the widely used Renesas H8S/2168 microcontrollers (+)

      Features:

      20054.jpg
      • Includes a schematic for the hardware and source code for the firmware. When integrated into a customer's AdvancedTCA board, these components form a compliant and interoperable IPM Controller
      • Tested for interoperability at PICMG-organized AdvancedTCA/AMC Interoperability Workshops
      • The reference design is purchased in a Board Management Starter Kit [...]
    • IPM Sentry ATCA Management Exerciser Board
      An AdvancedTCA form factor implementation of an AdvancedTCA IPM Controller. Suitable for bringup and testing of AdvancedTCA shelves (+)

      Features:

      • Provides broad visibility into the state of the IPM Controller, including the hardware address of its slot, temperature, and voltage measurements, hot swap state, E-Keying and power supply enable/disable state [...]
    • IPM Sentry Shelf Mn
      IPM Sentry Shelf Manager supporting AdvancedTCA Shelf Management Controller (ShMC) cross-connects (+)

      Features:

      • Hardware and software support for recent AdvancedTCA specification improvement that adds ShMC cross-connects
      • IPM Sentry Shelf Management Starter Kit provides the hardware and software support for new shelf
      • 333 MHz MIPS processor: the AMD Au1550-333
    • ShMM-300 Shelf Management Starter Kit
      Includes everything needed to build an AdvancedTCA or CompactPCI shelf manager , based on the ShMM-300 (+)

      Features:

      • Includes a schematic for a ShMM carrier board, ready for adaptation to the needs of your shelf
      • Bench top implementation of that schematic, along with a bench top IPM Controller Enables experimenting with AdvancedTCA or CompactPCI shelf management before any custom hardware is built
      • Bench top carrier comes with a ShMM-300 (containing the IPM Sentry Shelf Manager) already installed
    • BMR-AVR-AMC Reference Designs
      Board Management Reference Design for AdvancedMC modules (+)

      Features:

      • Schematics for a complete MMC subsystem, ready for integration into the design of your AMC, with adaptation as necessary
      • Firmware for that subsystem, delivered in source form and with development tools, ready for simple and quick adaptation to the specific requirements of your product
      • One-stop support for hardware, firmware, and software used in developing and delivering your IPM Sentry BMR-based MMC
    • ShMM-300
      Implements the hardware/software core of an AdvancedTCA shelf manager (with compatible support for CompactPCI as well) (+)

      Features:

      • SODIMM-sized ShMM-300 installed in a carrier board that is customized for a particular shelf architecture
      • The ShMM-300 and Pigeon Point's ShMM-500, provide the shelf manager core for most currently shipping AdvancedTCA shelves [...]
    • IPM Sentry Shelf and Board Management
      A family of hardware and software components that enable interoperable and compliant platform managment of open modular platforms based on PICMG specifications, including AdvancedTCA, AdvancedMC, and CompactPCI (+)

      Features:

      • Includes platform management solutions for the shelf, board, AMC carrier, and AMC module levels
      • See separate listings under Pigeon Point Systems for the individual solutions. [...]
    • HPI to xTCA Mapping
      Two separate implementations of the Hardware Platform Interface (HPI) for use with the Pigeon Point Systems Shelf Manager (+)

      Features:

      • Cmpliant with the latest HPI-to-xTCA mapping specification
      • The Service Availability Forum (SA Forum) defines the specification
      • According to Pigeon Point Systems, using a common HPI mapping for managing AdvancedTCA platforms minimizes the development effort needed to support new platforms [...]
    • BMR-AVR-AMCc AMC Carrier IPMC Ref Design
      One of a series of Pigeon Point Systems (PPS) Board Management Reference designs (+)

      Features:

      • This member of the series augments the BMR-AVR-ATCA IPM Controller to enable it to manage and represent Advanced Mezzanine Cards (AdvancedMCs) installed on an AdvancedTCA-based AdvancedMC carrier
      • This reference design is based on an AVR micro controller from Atmel [...]
    • xTCA MMC BMR Starter Kit
      Provides the key by rendering all firmware needed for FPGA development with the aim of quicker deployment of AMC products (+)

      Features:

      45102.jpg
      • Includes a benchtop management controller development board in AMC form factor style and a full SmartFusion FPGA design tucked inside a Libero Integrated Design Environment (IDE)
      • Also includes a production license and “comprehensive documentation”
      • Two benchtop variants of the kit: One for MicroTCA, one for AdvancedTCA
  • Pixus Technologies  (6)
    • Next Generation AdvancedTCA Chassis
      The Pixus next generation AdvancedTCA feature advances in cooling, backplane performance, and PEM design.  Our 13U and 15U ATCA system platforms utilize patented RiCool reverse impellar blowers for up to 400W/slot of cooling with meeting NEBS requirements and CPTA guidelines. Our 40GbE backplanes are creatively designed to keep costs at a minimum.  Contact us about 100G backplane options.  The new generation intelligent Power Entry Modules (PEMs) feature higher power options and compliance to PICMG 3.7.  With the industry's "most successful ATCA chassis design" with over 15000 global installs, choose Pixus for your AdvancedTCA system application. (+)

      Features:

      333872124883530886.jpg
      • 6U, 13U, 15U Chassis heights with next-gen upgrades
      • Superior 40GbE backplane performance while keeping costs low
      • Patented RiCool Rittal blowers for unprecedented cooling performance
    • PXS0640
      The PXS0640 is a 6-slot, 6U ATCA Shelf supporting a 40GBASE-KR4 backplane for 40GbE performance. The Ethernet switches have been integrated with the Shelf Managers to free up the two hub slots, thereby providing all 6 slots as node slots. (+)

      Features:

      298279875275468309.jpg
      • 40GBASE-KR4 Backplane for 40GbE performance
      • All 6 slots are payload slots, no hub slots required
      • Integrated Ethernet Switches and Shelf Managers
    • 6U ATCA SlotSaver - 40G
      Pixus Technologies, a supplier of backplane, enclosure, and embedded component solutions, has introduced a new 6U AdvancedTCA (ATCA) SlotSaver Shelf that gains 2 slots of payload card usage, along with AC power. The density, full redundancy, and versatile power configuration is well suited for telecom, military/aerospace, and high-end networking/computing applications. (+)

      Features:

      200691083411648479.jpg
      • Combined switch/shelf manager saves 2 node slots
      • 50% more computing density
      • Simultaneous AC/DC power
    • PXS1340
      The PXS1340 is a 13U, 14-Slot ATCA Shelf. It supports a 40GBASE-KR4 backplane in dual-star, full mesh, or replicated mesh configurations. All of the Field Replaceable Units (FRUs) provide full redundancy with quad Cooling Units (CUs), dual Power Entry Modules (PEMs), dual Shelf Manager Controllers (ShMCs), and dual Hubs. It supports front-to-rear cooling. Both DC and AC power options are available. Over 15,000 of the 10GBASE-KR version of the shelf have been deployed world-wide. (+)

      Features:

      300077358275634038.jpg
      • 40G or 10G Dual Star 14-Slot Backplane
      • 13U tall x 19â€? wide x 15â€? deep
      • Superior front-to-rear cooling configuration for airflow with empty Slots per NEBS
    • ATCA® Shelves and Backplanes
      AdvancedTCA® shelves from Pixus are equipped with the hot-swap high-performance RiCool III fans. These fans offer added output coupled with a reduced noise level. Pixus 40GBASE-40KR4 backplanes are monolithic with a high level of signal integrity in dual star, full mesh, or replicated mesh. (+)

      Features:

      304838884861878701.jpg
      • PXS1340 13U ATCA Shelf
      • PXS0640 SlotSaver 6U ATCA Shelf
      • PXS0309 3U ATCA Hybrid Chassis with 8 AMCs [...]
    • Enclosure Platforms for AdvancedTCA, MicroTCA & CompactPCI
      The Pixus/Rittal team have develop many of the first and most commercially successful AdvancedTCA and CompactPCI systems in the industry.  With a modular design approach, Pixus offers a wealth of enclosure configuration options for the most challenging design requirements.  The company also provides a wide range of MicroTCA enclosure solutions, specializing in customized platforms. (+)

      Features:

      • Superior cooling solutions with unique RiCool reverse impeller blowers
      • Ruggedized and customized versions available
      • Backplane experts with 40G standard products and 100G in design
  • Polaris Networks  (2)
    • xTCA Test Tools
      Conformance test tools for AdvancedTCA, MicroTCA, and AdvancedMC technologies to assist TEM and system integrators in testing interoperability of building blocks and reduce development and integration time (+)

      Features:

      • Test cases as per PICMG specification requirement
      • The testers have been selected by CP-TA for certification testing
      • Stop or continue on error/warning/info
    • AMC Tester V1.0.0
      Automated test suite is designed specifically for vendors to test Hardware Platform Management software development for AdvancedMC (+)

      Features:

      • Fully compliant with PICMG specification AMC.0 R2.0.
      • suited to help vendors meet the needs of certification and interoperability
      • The AMC Tester, which complements Polaris' existing range of AdvancedTCA and MicroTCA testers, is now commercially available
  • Radisys Corporation  (15 of 27)
    • ATCA 10GbE System
      AdvancedTCA 10 GbE traffic management and security system delivers very high performance deep packet inspection capabilities to allow TEMs to rapidly develop and deploy content-aware platforms (+)

      Features:

      33077.jpg
      • -Deep Packet Inspection for Content-Aware Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Deep Packet Inspection: Multi-core, multi-threaded MIPS64 processor -Integrated 10 Gbps security acceleration engine
    • PROMENTUM ATCA-9100
      AdvancedTCA media processing blade (+)

      Features:

      35150.jpg
      • Highest density of media processing through the use of latest multicore DSP silicon from Freescale
      • Single-slot PICMG 3.0/3.1 (Option 9) compliant
      • Hosts up to 20 quad-core Freescale MSC8144 DSPs on two mezzanine cards
    • Promentum ATCA-1000
      Four PCI Mezzanine Card (PMC) Sites with Front Panel Access (+)

      Features:

      19675.jpg
      • 2 PIM connections through optional RTM for sites 2 and 4
      • Onboard 8-port Gigabit Ethernet Switch (Broadcom BCM5682)
      • Internal 512KB packet buffer
    • Promentum ATCA-2100
      Single slot AdvancedTCA PICMG 3.0/3.1 compliant module (+)

      Features:

      19739.jpg
      • Highly integrated fabric module: GbE base interface, Fibre Channel fabric, shelf manager, two PMC sites
      • 28-port GbE PICMG 3.0 Base fabric switch: 14 GbE links to user slots, 1 GbE link to redundant switch blade, 8 GbE links for external connections (uplinks), 4 GbE links to onboard 2 PMC sites, 1 GbE link to off-board shelf manager
      • Wire-speed L2 and L3 switching: support for 4K IEEE 802.1Q VLANs, packet classification/filtering, link aggregation, QoS, CLI, and SNMP management
    • 10 GbE ATCA Traffic Management System
      Deep packet inspection for content-aware infrastructure (+)

      Features:

      34178.jpg
      • Multicore, multithreaded MIPS64 processor
      • Integrated 10 Gbps security acceleration engine
      • Packet inspection and distribution engine
    • Promentum ATCA-3000
      Single slot AdvancedTCA PICMG 3.0/3.1 compliant Fibre Channel disk storage module (+)

      Features:

      19738.jpg
      • Fully managed Fibre Channel storage module supporting module level hot swap
      • Single 3.5" disk drive site carrying 300 GB high performance, high reliability SCSI drive
      • Supports 1 Gbps or 2 Gbps Fibre Channel addressable through IPMI
    • Promentum ATCA-1200
      ATCA Managed Quad-AMC Carrier Blade (+)

      Features:

      44284.jpg
      • Enables a user to build multiple AdvancedTCA modules with different AMC configurations – PrAMC, Security (IPSec/SSL), Storage, I/O AMC, etc.
      • Control plane consists of the MPC8548 PowerQuik III processor, the Local Management processor (LMP), the PCI-E links connecting each AMC to the LMP and a 1 GE control port from the LMP to the switch
      • The PCI-E links, which are routed to each AMC via a PCI-E switch, provides the means of supporting “un-intelligent” boards and allow an application running on the LMP to initialized the AMC device much like legacy PCI devices were initialized. PCI-E switch also supports bridging function to enable AMC to AMC PCI-E communication or control
    • FlexPacket RTM-COP50
      A fail-to-wire Gigabit Ethernet copper bypass rear transition module for the company's flagship FlexPacket ATCA-PP50 packet processing blade (+)

      Features:

      43834.jpg
      • The COP50 is the industry's only AdvancedTCA solution that is specifically optimized for in-line Deep Packet Inspection (DPI)
      • Allows customers to avoid the cost and complexity of managing extra devices in the network while still offering protection against network outages
      • Supports in-line DPI for greater control and accuracy, resulting in lower overall system costs and higher density
    • Promentum ATCA-7010
      AdvancedTCA packet processing module (+)

      Features:

      20877.jpg
      • Dual Intel IXP28xx network processors with 1.4 GHz core and 700 MHz Xscale
      • Can be configured as single, or dual, parallel, or pipelined
      • 10 Gbps packet processing is made possible with 10, one Gigabit Ethernet interfaces that connect via a Rear Transition Module (RTM)
    • ATCA-PP50 Packet Processing Blade
      AdvancedTCA blade supporting two multi-core RMI XLR732 packet processors (+)

      Features:

      33080.jpg
      • Delivers deep packet inspection and security capabilities for wireless aggregators, IPTV, IMS, and security
      • Two XLR732 processors, each with 8 multi-threaded MIPS cores
      • Up to 16 GB per blade, 8 GB per XLR
    • ATCA-4500
      Single board computer (+)

      Features:

      42160.jpg
      • High-performance, single-slot AdvancedTCA computer module
      • Based on the single socket L5518 Intel Xeon processor
      • Suitable for control plane and server functions for LTE, wireless infrastructure, Deep Packet Inspection, IPTV, IP multimedia subsystems, and defense applications
    • FlexPacket ATCA-PP50 /FlexCompute ATCA-XE50 / FlexCore ATCA-FM40
      FlexPacket ATCA-PP50 (+)

      Features:

      36001.jpg
      • PP50 provides TEMs with deep packet inspection (DPI) capabilities to support advanced content-aware routing, traffic management, and security functions required by multi-service IP networks
      • The blade is engineered to meet the application needs of IPTV, 3G LTE aggregation gateways, and security platforms
      • Dual 1 GHz RMI XLR732 multicore MIPS64 packet processor
    • Promentum ATCA-4000
      Single slot AdvancedTCA PICMG 3.0/3.1 compliant module (+)

      Features:

      19737.jpg
      • Single or dual Low Voltage Intel Xeon processors with Intel NetBurst microarchitecture and a high bandwidth front-side bus, 2.0 GHz with 400 MHz system bus, E7501 chipset, 512 Kbytes L2 cache
      • Support for up to 4 GB DDR-266 ECC registered SDRAM via 4 angled DIMM sockets
      • One 64-bit, 33/66 MHz PMC site
    • FlexTCA
      AdvancedTCA deep packet inspection (DPI) solution (+)

      Features:

      47693.jpg
      • Network intelligence solutions such as Policy Charging and Enforcement Functions (PCEF) can exceed 200 Gbps while wireless core and security applications can scale up to 320 Gbps
      • Delivers up to 4 times the processing density of previous generation AdvancedTCA offerings at a price per bit savings of up to 75 percent
      • Enables network equipment providers (NEPs) to quickly and cost-effectively produce the scalable DPI applications operators need to monitor and control their network traffic while ensuring quality of service and experience (QoS/QoE)
    • Radisys Promentum AdvancedTCA Family
      Promentum SYS-6000: platform with Carrier Grade Linux, shelf management/HPI libraries, and HA blade/switch management (+)

      Features:

      20427.jpg
      • Promentum ATCA-1000: Universal PMC Module, flexibility of PMCs in different configurations for multiple applications
      • Promentum ATCA-2100: Switch/Control Module, GbE, and Fibre Channel switch fabric for control, services, and management applications
      • Promentum ATCA-3000: Disk Storage Module, providing high-performance Fibre Channel storage
  • SIE Computing Solutions, Inc.  (15)
    • 646 2-Slot
      3U, 2-slot AdvancedTCA system offering flexible power options in a tightly integrated system for maximum flexibility in a range of communications applications (+)

      Features:

      35258.jpg
      • The Field Replaceable Units (FRUs) of the 646 2-slot AdvancedTCA system feature dual redundant AC and DC power inputs at 600 W
      • The system's thermal management provides high pressure, high flow rate axial fans used in a separated push-push configuration for cooling more than 250 W per slot
      • The rear thermal management has the capability to cool 30 W per slot
    • 633 Series
      13U AdvancedTCA system (+)

      Features:

      33709.jpg
      • Designed to address demanding power requirements, thermal management challenges, and Network Equipment Building System (NEBS) requirements of the telecommunications, enterprise, and datacom marketplaces
      • Designed to meet the PICMG 3.0 AdvancedTCA specification, the 633 Series is available with a 14-slot Dual Star or Full Mesh backplane topology
      • Unique dual-redundant Pigeon Point Systems shelf management modules are located in the chassis' rear panel slot
    • 6861000-01
      An AdvancedTCA development system (+)

      Features:

      17490.jpg
      • Available with a six-slot, Full Mesh backplane that supports the AdvancedTCA PICMG 3.1, 3.2, and 3.3 specifications
      • Removable fan tray provides evacuation style cooling to all the card slots
      • Optional rear-mounted AC power supply provides –48VDC A&B, which eliminates the need for an external –48VDC converter
    • 543 Series
      A PICMG 3.0-compliant AdvancedTCA development system (+)

      Features:

      15497.jpg
      • Available with a two to six-slot full-mesh backplane that supports the AdvancedTCA PICMG 3.1, 3.2, and 3.3 specifications
      • Removable fan tray provides evacuation-style cooling to all card slots
      • Optional rear-mounted AC power supply that provides -48VDC A&B, which eliminates the need for an external -48VDC converter
    • SMM08 8U ATCA Shelf Management Modules
      AdvancedTCA compliant ShMM (+)

      Features:

      21956.jpg
      • Plugs directly in to Zone 1 connector and can be used in any AdvancedTCA slot
      • Compatible with all Carlo Gavazzi Full Mesh backplanes
      • One slot wide
    • 2.17 Backplanes
      A line of standard and custom, high-power, low-noise, StarFabric CompactPCI backplanes (+)

      Features:

      16831.jpg
      • Eight and 21 slots standard
      • Two to 21-slot custom configurations available
      • 6U and 7U format
    • 2.16 Backplanes
      A line of standard and custom high-power, low noise PICMG 2.16 CompactPCI backplanes (+)

      Features:

      16830.jpg
      • Standard eight-slot CompactPCI backplanes feature PICMG 2.9 IPMB to all slots, hot-swap compliance, and 5V or 3.3V switchable signaling
      • The eight-slot backplane offers one system slot that can be configured as a PICMG 2.16 node slot, six peripheral/PICMG 2.16 node slots, and one fabric slot
      • Custom configurations ranging from two to 21 slots available [...]
    • PICMG 2.16/2.17 and AdvancedTCA Backplanes
      Eight slots standard (+)

      Features:

      • Two- to 21-slot custom configurations available
      • 6U and 7U format
      • 64-bit operation
    • SMM04 4U ATCA Shelf Management Modules
      AdvancedTCA compliant ShMM (+)

      Features:

      21955.jpg
      • Designed for Carlo Gavazzi's 14 slot Dual Star and Full Mesh backplanes with SMM04 ShMM Slot [...]
    • AdvancedTCA Air Impedance Modules
      PICMG 3.0 (+)

      Features:

      • 8U x 6HP Form factor
      • 280mm depth
      • 6061-T6 Aluminum extruded front panel
    • 533 Series 13U
      AdvancedTCA Shelf System (+)

      Features:

      24360.jpg
      • Supports up to 14 slots at 30 mm pitch front and rear with either dual star or full mesh backplanes
      • Configured as a 3X Replicated full mesh extended fabric topology to maximize the platforms bandwidth
      • Front accessible cooling modules to optimize power dissipation and height requirements while minimizing MTTR
    • 544 Series 5U
      AdvancedTCA Shelf System (+)

      Features:

      24359.jpg
      • Supports up to five slots at 30 mm pitch front and rear with a five slot high-performance backplane configured as a 3X replicated full mesh extended fabric topology to maximize the platform's bandwidth
      • Front accessible cooling modules to optimize power dissipation and height requirements while minimizing MTTR
      • High performance thermal management systems contained within the 544 Series are configured in push pull orientation, providing the required airflow to cool 200 watts front side and 30 watts back side
    • AdvancedTCA Backplane
      Backplane topologies for Dual Star and Full Mesh (+)

      Features:

      • 2 to 16 slots customizable
      • Backplanes for all topologies
      • 2, 6, and 14 slot backplanes [...]
    • AdvancedTCA Front Panel Kit
      8U x 6HP form factor front panel hardware (+)

      Features:

      • 6061-T6 aluminum extrusion
      • EMI gasket provided
      • Inserter/ejector compliant to IEEE-1101.10
    • AdvancedTCA Air Slot Blockers
      A CG Mupac 533 series chassis accessory (+)

      Features:

      • All customizable air flow
      • Blocking or metering air flow specifically to card set. Attaches to the lower sub-rack extrusions of the 533 chassis
      • Enhances EMI shielding
  • SOUTHCO  (4)
  • Telco Systems  (1)
    • T-HUB4
      40G ATCA switch blade to enable next generation mobile applications such as LTE and 4G as well as metro Ethernet, security, and military applications that require high performance and high availability (+)

      Features:

      • Telco Systems' T-HUB4 delivers simultaneous 10G and 40G connectivity to support AdvancedTCA service modules
      • T-HUB4 delivers an extensive networking software suite, BiNOX to provide state of the art connectivity, including switching, IPv4/IPv6 routing, MPLS, QoS, protection and redundancy, and clock synchronization to the ATCA platform
      • BiNOX is Telco Systems' field-proven, carrier grade networking operating system offering superior control and security while delivering wire speed Layer 2-4 networking
  • TeraChip, Inc.  (3)
    • 160 Gbps ATCA Switch Fabric Card
      The TeraChip TSC-160XUI-A1 is an operational 160 Gbps switch fabric card for standard AdvancedTCA chassis, offering the low risk, simplicity and scalability of AdvancedTCA standard devices (+)

      Features:

      18710.jpg
      • Designed for switch vendors serving the enterprise (LAN), storage (SAN), and metro (MAN) markets
      • The TSC-160XUI-A1 is based on TeraChip's TCF16X10 scalable single-chip switch fabric device, capable of switching data streams of 10 Gbps using a shared-memory architecture that supports: 16 slots of 10Gbps per slot
      • 8 priority queues per port
    • 160 Gbps Switch Fabric Solution
      AdvancedTCA compliant 160 Gbps solution (+)

      Features:

      20401.jpg
      • Single-chip based solution with low power consumption of only 15 W
      • Scalable up to 320 Gbps in an AdvancedTCA chassis
      • Switch card redundancy of 1:1 and 1+1
    • TCF16X10
      AdvancedTCA compliant 160 Gbps solution (+)

      Features:

      30215.jpg
      • Single chip-based solution with low power consumption of only 15 W
      • Scalable up to 320 Gbps in and AdvancedTCA chassis
      • Switch card redundancy of 1:1 and 1+1
  • UXComm  (1)
    • ATCA Solution 1.0 - ATCA Management Software
      Integration-ready software platform for AdvancedTCA system management (+)

      Features:

      21830.jpg
      • Discover - discover servers and AdvancedTCA Chassis Management Modules (CMM)
      • Monitor: customized displays for AdvancedTCA chassis inventory
      • Detect and Alert: send notification through SNMP and e-mail for thresholded events
  • Westek Technology  (1)
    • P1414ATCA
      14U AdvancedTCA compliant chassis with 14 expansion slots (+)

      Features:

      • Redundant –48V DC Powered
      • 14 card slot backplane
      • High performance hot swap cooling
05/22/22 01:51
Close

Subscribe to AdvancedTCA updates