Analog

Showing results for: analog to digital
Refine Analog companies and products:
analog analogue analog circuit analog ic analogue circuit analogue ic analog to digital digital to analog a/d d/a adc dac continuous signal
Click on any vendor
to see a listing of
analog to digital related products.
  • 4DSP  (1)
    • FMC160
      The FMC160 provides one 12-bit A/D channel at 3.6Gsps and one 14-bit D/A channel at 5.6Gsps (2.8Gsps direct RF synthesis) clocked by either an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. In addition, a trigger input for customized sampling control is available to users. The FMC160 daughter card is mechanically and electrically compliant to the FMC standard (ANSI/VITA 57.1). The FMC160 has a high-pin count connector, front panel I/O, and can be used in a conduction cooled environment. The design is based on Texas Instruments' ADC12D1800 Analog-to-Digital converter and Analog Devices' AD9129 Digital-to-Analog converter. The analog signals are AC coupled connecting to MMCX or SSMC coax connectors on the front panel. The FMC160 allows flexible control on clock source through serial communication busses. Furthermore the card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions in order to reduce system level power consumption. It is well suited for low power applications such as airborne where the highest level of performance is required while ensuring that mission range does not get affected. FEATURES: One ADC12D1800: Single channel 12-bit 3.6Gsps One AD9129: Single channel 14-bit D/A up to 5.6 Gsps (2.8Gsps without 1:2 interpolation) - LVDS VITA 57.1-2010 compliant Conduction Cooled – Standard Option Single ended AC-coupled analog signals 6 MMCX/SSMC connectors available from the front panel 4 LVTTL signals available from an HDMI connector on the front panel 4 Xilinx MGT available from an HDMI connector on the front panel Clock Source, Sampling Frequency through SPI communication busses Flexible clock tree enables: on board VCO: 2200MHz - 4400MHz external reference clock external sampling clock Power-down modes to switch off unused functions for system power savings Mil-I-46058c Conformal Coating Compliant (optional) HPC – High Pin Count Connector LVDS IO signaling [...] (+)

      Features:

  • ACCES I/O Products, Inc.  (6)
    • 104-AIO16-16
      Multifunctional high-speed analog-to-digital and digital-to-analog converter card for PC/104 (+)

      Features:

      14717.jpg
      • 16 single-ended/eight differential analog inputs
      • 16-bit resolution, 500 Ksamples/sec conversions
      • Nine input ranges (uni/bipolar)
    • DAQ-PACK System
      The DAQ-PACK offers 32, 64, 96 or 128 channels of single-ended or differential analog inputs, a unique real-time internal autocalibration system for high accuracy, and a wide ran (+)

      Features:

      52471.jpg
      • 32, 64, 96 or 128-channels, single-ended or differential analog inputs
      • High-speed USB 2.0 multifunction DAQ with sustained sampling speeds up to 500kHz
      • 12 or 16-bit resolution
    • 104-AIM-32
      PC/104 analog signal multiplexer for data acquisition (+)

      Features:

      • Card multiplexes and conditions 16 differential or 32 single-ended analog signals before passing them to an analog-to-digital converter card
      • Removable screw terminal block provided for termination of the input signals coming from thermocouples, three-wire RTDs, strain gauges, four 20mA current inputs as well as DC and AC voltage inputs
      • Factory installed bridge completion circuit, current-to-voltage circuit, and current sourcing circuits for the RTDs are optional
    • 104-AIO 12-8
      PC/104 analog I/O board features eight channels, 12-bit resolution on input and four channels, 12-bit resolution on output (+)

      Features:

      • Analog input configuration employs an instrumentation preamplifier per channel (differential inputs), 200V common mode rejection, high input impedance, and optional factory channel-by-channel gain, with preset features, to accommodate low-level inputs from sensors
      • Analog output ranges are field selectable with jumpers
      • Digital I/O lines are pulled up to 5V or pulled down to ground
    • USB-AO-ARB1 Arbitrary Waveform Generator
      USB high speed arbitrary waveform output board with flexible ranges and configurable digital I/O lines. (+)

      Features:

      297859801718381091.jpg
      • 16-bit analog output for precisely timed waveforms up to 8MHz
      • High-speed USB 2.0 device, USB 3.0 compatible
      • Three unipolar and three bipolar output ranges
    • USB-AO Series
      Up to 16 analog outputs with 12 or 16-bit resolution (+)

      Features:

      52225.jpg
      • Unipolar and bipolar output ranges
      • Real-time hardware calibration per channel
      • Update outputs individually or simultaneously
  • ADLINK Technology, Inc.  (9)
    • PCI-9527
      The PCI-9527 is a high-performance, 2-CH analog input and 2-CH analog output dynamic signal acquisition board. This board is specifically designed for audio testing, acoustic measurement, and vibration analysis applications. The ADLINK PCI-9527 features two 24-bit simultaneous sampling analog input channels. The 24-bit sigmadelta ADC provides a sampling rate up to 432 KS/s at high resolutions, making it ideal for higher bandwidth dynamic signal measurements. The sampling rate can be adjusted by setting the onboard DDS clock source to an appropriate frequency. All channels are sampled simultaneously and accept an input range from ±40 V to ±0.316 V. The PCI-9527 analog input supports software selectable AC or DC coupling and 4 mA bias current for integrated electronic piezoelectric (IEPE) sensors. The ADLINK PCI-9527 also has two channels of 24-bit resolution, high fidelity analog output. The outputs occur simultaneously at software programmable rates up to 216 KS/s. A software programmable output range of ±0.1 V, ±1 V, and ±10 V is available on the output channels. (+)

      Features:

      183912127701794017.jpg
      • 24-Bit Sigma-Delta ADC and DAC
      • 2-CH simultaneous sampling analog input
      • 2-CH simultaneous updated analog input
    • PCIe-9842
      The ADLINK PCIe-9842 is a 200 MS/s 14-bit 1-CH digitizer designed for applications such as LIDAR testing, optical fiber testing, and radar signal acquisition. The 100 MHz bandwidth analog input with 50 ohm impedance is designed to receive ¡Ó1 V high speed signal. With this simplified front-end design and high stable onboard reference, the PCIe-9842 provides not only high accuracy measurement results but also delivers high dynamic performance. For applications that require data to be acquired and transferred in real-time, the PCIe-9842 utilizes the PCI Express x4 bus as its interface. When signals are converted from analog to digital data, the data will be transferred to host system memory continuously because of the high bandwidth of the PCI Express. For applications that require data to be acquired and transferred in real-time, the PCIe-9842 utilizes the PCI Express x4 bus as its interface. When signals are converted from analog to digital data, the data will be transferred to host system memory continuously because of the high bandwidth of the PCI Express. (+)

      Features:

      183913114701794017.jpg
      • Up to 200 MS/s sampling rate
      • High resolution 14-bit ADC
      • ±1 V Input range with 50 Ω input impedance and DC couple
    • DAQ-2000
      A series of half-size data acquisition control cards that incorporate Adlink's carrier and daughter modular design concept (+)

      Features:

      • The digital and analog functions are separated onto isolated boards, with the analog functions on a daughter board
      • Easily upgraded to CompactPCI/PXI by changing the carrier
      • 100% software compatibility
    • DAQe-2200
      PCI Express data acquisition cards (+)

      Features:

      33379.jpg
      • Family of cards can sample up to 64 analog channels with input voltages ranging up to 10 V
      • 2204 model: 12-bit A/D card with 3 MSps (simultaneous); 2205: 16-bit A/D card with 500 KSps (simultaneous); 2206: 16-bit/250 KSps
      • All boards offer differential mode (making 32 analog channels) to eliminate noise, analog and digital triggering, and a system synchronization bus to “lock together” up to four cards
    • DAQ-2010
      A 4-channel, simultaneous 2 MHz A/D and 2-channel, 1 MHz D/A, multifunction I/O card (+)

      Features:

      • Uses the carrier and daughter modular design concept, which separates the analog circuitry and digital circuitry into two cards, greatly reducing the signal noise generated by digital parts and increasing the Effective Number of Bits (ENOB) in the data measurement
      • Carrier/daughter design eases upgrading from PCI fom factor to CompactPCI/PXI
      • Intelligent timing control logic and data buffer management
    • PXI-2006
      3U PXI / CompactPCI compliant (+)

      Features:

      • 4-CH differential analog inputs, bipolar or unipolar
      • 16-bit A/D, 250 Ks/s Simultaneous-Sampling
      • On board 512-sample A/D FIFO
    • PXI-9820
      PXI Specification Rev. 2.1 compliant (+)

      Features:

      19921.jpg
      • 14-bit A/D resolution
      • Up to 60MS/s sampling rate per channel with internal timebase
      • Up to 130MS/s sampling rate in “ping pong” mode
    • PCM-9112+
      PC/104-Plus multifunction DAS module (+)

      Features:

      12729.jpg
      • 12-bit analog input resolution
      • 16 single-ended or eight differential analog inputs
      • Auto-scanning channel selection
    • PCI-9820
      A high-speed, high-resolution data acquisition card (+)

      Features:

      • Two analog inputs and a system synchronization interface (SSI)
      • 14-bit resolution
      • Maintains single-channel sampling rates of 130 MSps and dual-channel rates of 65 MSps
  • Advantech Corporation  (15 of 25)
    • PCI-1744e
      \High-Speed Analog Input Card with PCI Express Interface (+)

      Features:

      • PCIe-1744 4-channel, 12-bit, ultra high-speed analog data acquisition card with PCI express interface
      • The PCIe-1744 is capable of handling analog-to-digital sampling simultaneously and independently on all four channels
      • The PCIe-1744 features multiple trigger modes for convenient application scenarios and a 30MHz sampling rate is achieved with independent A/D converters for each of the four analog input channels
    • MIC-3723
      16-bit, 8-channel non-isolated analog output card (+)

      Features:

      • 3U CompactPCI 16-bit 8-channel non-isolated analog output card
      • Each analog output channel is equipped with a 16-bit double-buffered DAC and features an auto-calibration function and BoardID switch
      • The MIC-3723 is a plug & play device that fully complies with the PCI specification Rev 2.2
    • USB-4716
      A 200 KSps 16-bit multifunction USB 2.0 I/O module (+)

      Features:

      32994.jpg
      • Designed for industrial environments
      • Includes a USB connector with screw fasteners and a DIN-rail mounting kit
      • Draws power directly from the USB port and therefore does not require an external power supply
    • PCM-3813I
      Advantech Launches Isolated Analog Input PCI-104 Card (+)

      Features:

      42559.jpg
      • The Industrial Automation Group of Advantech introduces the PCM-3813I PCI-104 module with 100 kS/s, 12-bit 32-channel isolated analog input
      • The PCM-3813I offers 2,500 VDC isolation protection and software programmable gain on each analog input channel protecting computers and connected peripherals from high voltage damage on the input lines
      • Moreover, the PCM-3813I breaks the traditional limitations of analog input data transmission by providing significantly faster speeds than similar modules on the market
    • ADAM-4117
      The ADAM-4117 is an 8-channel analog input module starting at $375. (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the ADAM-4117, a data acquisition module designed for reliable operation in harsh environments. Its built-in microprocessor, encased in rugged industrial-grade ABS plastic, provides intelligent signal conditioning, analog I/O, digital I/O, LED data display, and an address mode with a user-friendly design.
      • Other ADAM-4117 features include: 8 differential and independently configurable channels, high noise immunity, broad power input range (+10~48VDC), LED display, and on-line firmware update. It supports both unipolar and bipolar inputs and has 1 kV surge protection on the power input, 3 kV ETF, and 8 kV ESD protection. It supports the popular Modbus/RTU protocol as well a simple ASCII based protocol.
      • The ADAM-4117 starts at $375 and is available for purchase directly from Advantech at 1-800-205-7940 or from one of Advantech's North American distributors at www.eautomationpro.com/us. [...]
    • PEC-3710
      Integrated I/O controller (+)

      Features:

      52367.jpg
      • AMD LX800 500 MHz controller
      • 16-channel analog input
      • 4-channel analog output
    • PCI-1727U
      The eAutomation Group of Advantech introduces the PCI-1727U analog output PCI card featuring 12 analog output channels with DB-37 connector. The PCI-1727U is capable of outputting +/- 10V and 0~20mA current loops with 14-bit resolution. It's equipped with 16 TTL DI and 16 TTL DO channels that are suitable for industrial control applications and a universal PCI bus compatible with both 3.3V and 5V signaling. (+)

      Features:

      • The PCI-1727U is compatible with Advantech's popular ISA card functions, connectors, and Windows DLL drivers allowing you to upgrade from ISA to PCI effortlessly. The ISA-compatible card uses the same software API as ISA cards, there is no need to rewrite programming when upgrading. The PCI-1727U features synchronized analog output function allowing multiple devices to be driven simultaneously without any synchronization lags.
      • The PCI-1727U starts at $795 and is available for purchase directly from Advantech at 1-800-205-7940. [...]
    • PCI-1742U
      One MSps, 16-bit, 16-channel multifunction DAQ card (+)

      Features:

      32973.jpg
      • High-resolution multifunction DAQ card with fast sampling rate for PCI bus
      • 16x single-ended or 8x differential analog input channels, 1.0 MSps single channel sampling rate (800 KSps multi-channel), 2 x 16-bit D/A output channels, 16 x digital input/output channels, and 1 x 10 MHz 16-bit counter channel
      • 1K analog input FIFO
    • APAX-5072
      Advantech launches new Ethernet IP Remote I/O Solution (+)

      Features:

      • Advantech Industrial Automation Group introduces the APAX-5072, a new high-density Ethernet IP communication coupler
      • The APAX-5072 features ODVA (Open DeviceNet Vendors Association) authorization, allowing it to link with any Ethernet IP master to easily build a reliable Ethernet IP remote I/O solution
      • The APAX-5072 features two RJ-45 ports with the same IP address for building daisy chains, which allows users to connect remote I/O devices directly without an additional Ethernet switch
    • USB-4702
      Low-cost multifunction USB DAQ module for testing/lab use (+)

      Features:

      43570.jpg
      • 8-channel, 12-bit, 10 kS/s multifunction USB DAQ module for testing, lab, student, or training use
      • Specialized low-cost unit that has no casing whatsoever and is intended for customers looking for basic functionality and is recommended for students or trainees
      • The most inexpensive data acquisition module ever released from Advantech, the USB-4702 provides analog I/O, digital I/O, and counter functions for a wide range of uses
    • USB-4704
      Data acquisition module (+)

      Features:

      45607.jpg
      • The USB-4704 is a 48 kS/s, 14-bit, 8-channel multi-functional module with analog I/O, digital I/O and counter functions specifically recommended for students or trainees
      • It comes packaged with Wavescan, a data logging tool that provides examples such as Visual C++, Visual Basic, Visual C#, Visual Basic .NET, Borland C++ builder, Delphi, and LabView for easy development
      • The USB-4704 has a price of $190, making this multi-functional USB module an excellent option for consumers looking for a low cost personal measurement tool [...]
    • APAX-5070
      Advantech Launches a New Modbus/TCP Remote I/O Solution (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the APAX-5070, a high-density Modbus/TCP Remote I/O solution
      • This Modbus/TCP coupler module allows any PC, controller, or HMI device that supports the Modbus/TCP protocol to easily and cost-effectively add remote I/O functionality to access data and perform read and write actions
      • The APAX-5070 is equipped with two RJ-45 ports with the same IP address which can build daisy chains to connect remote I/O devices directly without an additional Ethernet switch
    • BACnet
      Four BACnet I/O Modules (+)

      Features:

      47712.jpg
      • BAS-3018BC 8-channel Universal Input Module
      • BAS-3024BC 4-channel Universal Input
      • 4-channel Analog Output
    • IPPC-7158B
      15-inch Industrial Panel PC (+)

      Features:

      40788.jpg
      • Passive backplane with up to 12 ISA/PCI expansion slots, a front-accessible design with water resistant cover, a flat-sealed front-panel, and can be bundled with high performance PICMG 1.0 Core2 Quad/Dual or Pentium 4 Single Board Computer (SBC)
      • An aluminum detachable side-open front panel (NEMA4/IP65 compliant) allows for easy installation and maintenance
      • For user interface considerations, this model has a front-accessible USB 2.0 port, programmable membrane macro keys, function keys, cursor keys and touchpad, OSD control behind the panel, and an optional analog resistive touchscreen through USB interface
    • FPM-3170G
      17" SXGA TFT LCD Flat Panel Monitor (+)

      Features:

      33191.jpg
      • 1280 x 1024 resolution
      • Direct-VGA, DVI, video, and S-video inputs
      • Vivid and sharp images
  • Agilent Technologies  (2)
    • E1430A
      2 pass, or subranging, 10 Msamples/sec ADC with 23 bits of resolution (+)

      Features:

      • A single-slot, single channel, C-size, VXI card that is a complete A/D module
      • Included in the module with the low distortion, low noise analog to digital converter, is flexible input signal conditioning, tunable digital filtering, an 8-Mbyte memory, and a high-speed local bus
      • Input signal conditioning includes 11 attenuation/gain ranges, AC/DC coupling and an analog anti-alias filter
    • N8211A
      20/40 GHz performance analog upconverter generates a stimulus signal with superior AM, FM and pulse modulation capabilities (external or internal modulation) (+)

      Features:

      • Based on the PSG analog signal generator's high output power, low phase noise and excellent level accuracy [...]
  • Aitech Defense Systems  (3)
    • M453
      An analog I/O PMC module (+)

      Features:

      15665.jpg
      • 50 analog input channels
      • 16-bit A/D conversions at 100 Ksamples/sec
      • 12 differential or 24 single-ended analog input channels with ±10V input range
    • C437
      A rugged, low power 6U VMEbus board that provides multiple I/O capabilities, including ARINC-429, analog-to-digital, digital-to-analog, audio, and discretes (+)

      Features:

      30091.jpg
      • VME single-slot board
      • VME slave interface
      • Four opto-isolated differential 16-bit A/D input channels and D/A output channels
    • S930 I/O Card
      Rad-tolerant 3U, CompactPCI analog I/O card that increase real-time communication and I/O functions between control subsystems and external subsystems (+)

      Features:

      33260.jpg
      • Designed for LEO, Mars Terrestrial with an Option for GEO Environments
      • Single-Slot Conduction-Cooled 3U CompactPCI card
      • 12-bit A/D converter with -10 V to +10 V input range
  • Alphi Technology Corporation  (9)
    • PCIe-Mini-AD8200
      The PCIe-Mini-AD8200 with 1X Lane PCI Express Mini card and a simultaneously sampled A/D, offers a mix of up to 8 single-ended or 4 differential analog input channels. All channels feature programmable gain 1 or 2 and can be programmed to handle analog input with a single-ended or differential configuration. The 16-bit A/D converters can provide a global acquisition and conversion time of â‰?5Î?sec per sample per channel. The board offers a programmable digital filter with ±5 V range and the −3 dB frequency is typically 15 kHz. In the ±10 V range the −3 dB frequency is typically 23 kHz. Alphi Technology offers a variety of PCI Express Mini cards: PCIe-Mini-DA16, PCIe-Mini-1553, PCIe-Mini-ARINC429, PCIe-Mini-CAN, PCIe-Mini-DIO and more. FEATURES: 8 channels 16-bit A/D converter simultaneously sampled Fast throughput rate: 200 KSps for all 8 channels 8 channels SE or 4 pseudo differentials Single-ended or 4 differential channels True bipolar analog input ranges: ±10 V, ±5 V – selection applies to all channels Analog input clamp protection 1MΩ analog input impedance Programmable 2nd order anti-alias analog filter Over-sampling capability with digital filter PCI Express compliant [...] (+)

      Features:

    • PXI-ADDA
      A 16-bit analog-to-digital/digital-to-analog converter (+)

      Features:

      • Quad channel
      • 16 digital I/O
      • TMS320C31 DSP processor
    • CPCI-DA16
      A CompactPCI module 16-channel, 16-bit digital to analog board (+)

      Features:

      • 10 uS DAC converters
      • Two banks of 256 Kbyte SRAM for wave form tables
      • Selectable internal and external power options
    • PXI-DA16
      A 16-channel, 16-bit digital-to-analog converter (+)

      Features:

      • 3U CompactPCI form factor
      • 10 uS DAC converters
      • High-speed transfers to and from the CompactPCI bus
    • CPCI-DSC4
      A 4-channel A/D and D/A converter with 16 digital I/O channels (+)

      Features:

      • TMS320C31 DSP control processor
      • 512 Kbytes of zero-wait-state SRAM
      • External or internal scan clock
    • CPCI-DA-16
      3U slave digital-to-analog board managed by the host processor on the CompactPCI bus (+)

      Features:

      • Contains a state machine that performs most data output to minimize impact on the host system
      • 16 independent channels
      • 16-bit D/A converters
    • CPCI-MFIO-6U
      An intelligent 6U multi-function I/O (+)

      Features:

      • PMC mezzanine site
      • 32 single-ended channels or 16 differential channels
      • 16-bit A/D
    • PXI-AD16
      A 3U data acquisition module (+)

      Features:

      • Sixteen 16-bit channels
      • TMS320C31 DSP processor
      • 512 Kbyte of zero-wait-state SRAM
    • CPCI-AD8/16-200
      Intelligent data acquisition board (+)

      Features:

      • 3U -8-16 A/D Simultaneous Channels
      • 16 Channels, 16 bits, 200KSPS
      • 3U CompactPCI module
  • Analog Devices, Inc.  (10)
    • ADuC702x
      A single-chip, precision analog microcontroller solution that integrates a 12-bit analog front end with a 32-bit RISC processing core for industrial, optical networking, and automotive applications (+)

      Features:

      • Integrates an ARM7TDMI core with a Flash-based 16/32-bit RISC MCU with processing capabilities up to 45 MIPS peak performance
      • Analog peripherals include up to 16 channels of fast, 12-bit accurate analog-to-digital conversion, up to four individual 12-bit monotonic digital-to-analog converters, and a precision bandgap reference
      • Other peripherals include a comparator, programmable logic array (PLA), and a three-phase PWM generator
    • AD9736
      A 14-bit digital-to-analog converter (DAC) that clocks at a sample rate of 1.2 GSps (+)

      Features:

      • Operates from 1.8V and 3.3V supplies, consuming 380mW at 1.2 GSps with the interpolation filter bypassed and 550mW with the interpolation filter enabled
      • Provides a fast LVDS input interface using a DDR mode
      • Output currents are programmable over a range of 10mA to 30mA and can be configured for various single-ended or differential circuit topologies
    • AD7686
      A 16-bit Successive-Approximation Register (SAR), analog-to-digital converter (+)

      Features:

      • Housed in a 5mm x 3mm MSOP (micro-SOIC) package
      • Operates at 550 Ksamples/sec while providing ±3 LSB linearity
      • Typical power dissipation of 20mW with a 2.7V supply
    • AD77990/91 and AD7788/89
      A low-power, 24-bit, sigma-delta analog-to-digital converter (+)

      Features:

      • Consumes only 25µA
      • Available in a MCOP-10 package
      • On-chip buffer and internal clock generator
    • AD5641
      A digital-to-analog converter (DAC) (+)

      Features:

      • Part of the nanoDAC family; small package and low power consumption
      • SC-70 package
      • 14-bit resolution
    • AD5379
      A 40-channel, 14-bit, voltage-output, digital-to-analog converter (DAC) (+)

      Features:

      • 40 DAC channels and 40 output amplifiers (with gain) in a 108-ball, CSPBGA package
      • All DACs are monotonic to 14 bits and accurate to 12 bits
      • Maximum output voltage span of the DACs is 17.5V
    • AD9956
      A low-power, monolithic radio frequency (RF) synthesizer that integrates both direct digital synthesis (DDS) and phased locked loop (PLL) circuitry (+)

      Features:

      • Part of the AgileRF family of synthesizers
      • Operates in the ISM band of frequencies
      • 650-MHz, PECL-compliant CML clock driver with programmable slew rates
    • AD5380/AD5382
      A family of high-density digital-to-analog converters (DACs) (+)

      Features:

      • 40-channel (AD5380) or 32-channel (AD5382) 14-bit, voltage-output DAC operates from a single 5V power supply
      • On-chip, low-drift reference
      • User-programmable offset and gain for digital range adjustment and system calibration
    • AD534x Family
      A family of low-voltage, octal, digital-to-analog converters (+)

      Features:

      • Each device integrates eight low-power, parallel-interface DACs
      • Available in 6mm x 6mm chip-scale packages (CSP)
      • Available in 8-bit (AD5346), 10-bit (AD5347), and 12-bit (AD5348) versions
    • ADSP EZ-ICE
      In-circuit emulator for Analog Devices ADSP-2171 DSP (+)

      Features:

      • Contains GUI for easier debugging control
      • Plugs directly into processor socket on target board
      • Stand alone operation for software debugging
  • Annapolis Micro Systems, Inc.  (1)
    • 2.5 GSps 10-Bit ADC FMC
      The 2.5 GSps 10-Bit ADC FMC provides high fidelity and high speed analog-to-digital conversion along with a rug-ged design. The 2.5 GSps 10-Bit ADC FMC is shipped with a custom heatsink which enables proper cooling of the ADC. An on-board temperature monitor is also supplied which allows for real-time monitoring of the ADC’s internal die temperature. The FMC is mechanically and electrically compliant to FMC standard (ANSI/VITA 57.1). (+)

      Features:

      293453569861406184.jpg
      • 2.5 GHz Max Input Sample Rate
      • 10-Bit A/D conversion with e2v® EV10AS150A or EV10AS150B Analog-to-Digital Converter
      • Analog input configuration option: EV10AS150A – Middle Band; EV10AS150B - Low Band & Middle Band
  • CAEN Technologies,Inc.  (2)
    • V1742
      The Mod. V1742 is a VME board housing two sections of 16+1Channels 12bit 5GS/s Switched Capacitor Digitizer, with 1 Vpp input dynamic range on single ended MCX coaxial connectors. The DC offset adjustment (range ± 1V) on each channel by 16bit DAC allows a right sampling of a bipolar (Vin=± 0.5V) up to a full positive (Vin= 0 · +1V) or negative (Vin= 0 · -1V) analog input swing without losing dynamic resolution. The analog input signals are continuously sampled into the DRS4s (resolution up to 200ps) in a circular analog memory buffer (1024 cells). As a trigger signal arrives, all analog memory buffers are frozen and subsequently digitized with a resolution of 12bit into a digital memory buffer. The digital memory (128 events deep for each channel, where 1 event = 1024x12bit) allows to store following events, even if the readout is not yet started. Moreover, since the digital memory buffers work like FIFOs, the readout activity from VME or Optical Link doesn’t affect write operations of successive events. (+)

      Features:

      184331390941381821.jpg
      • A common board trigger can be provided via VME or Optical Link, or by TRGIN input.
      • 32+2 Channel in a 6U VME module
      • 12 bit; Selectable 5, 2.5, 1 GS/s Switched Capacitor ADC
    • V1724
      -8 channel -14 bit 100 MHz ADC with digital pulse processing (+)

      Features:

      • Analog Sum/Majority and digital over/under threshold flags for Global Trigger logic
      • Front panel clock In/Out available for multiboard synchronisation (direct feed through or PLL based synthesis)
      • Digital Pulse Processing for Spectroscopy Applications
  • Curtiss-Wright  (14)
    • FMC-520 DAC
      The FMC-520 DAC dual/quad channel digital-to-analog converter card, that can support up to 4 analog output channels updating at 500 MSPS or 2 analog output channels at 1 GSPS (+)

      Features:

      43574.jpg
      • Dual Texas Instruments DAC5682Z 16-bit digital-to-analog converters
      • Four (4) analog output channels updating at 500 MSPS or two (2) analog output channels updating at 1.0 GSPS
      • Choice of sample clock options: onboard, external direct or external 10 MHz reference
    • VPX3-535 3U VPX ADC DAC 6 GSPS
      The VPX3-535 combines high-speed multi-channel analog IO, VITA 48.8 Air-Flow Through (AFT) technology, user programmable FPGA processing and local processing in a single 3U VPX slot for direct RF wideband processing to 6Gsps. This card allows for a high performance single slot transceiver with two 6Gsps 12bit channel, to over 6GHz instantaneous analog bandwidth, but can also scale to larger system with many channel. The architecture is optimized for RADAR, Electronic Warfare (EW), Signal Intelligence (SIGINT), Radar Warning Receivers (RWR) & Software Defined Radio (SDR). (+)

      Features:

      • 3U VPX ADC DAC Card with Xilinx UltraScale FPGA
      • 2x 6Gsps/12b analog inputs (or 4x 3Gsps/12b)
      • 2x 6Gsps/12b analog outputs
    • RVG-SA1 Analog Video Switch
      The Curtiss-Wright RVG-SA1 SWaP-C-optimized analog video switch implements analog crossbar functionality such that any of the 12 analog video inputs can be routed to any of the 12 outputs. The RVG-SA1 implements a digital crossbar to allow routing of 8 digital inputs to any of 8 digital outputs to support HSYNC and VSYNC connectivity for four PC-style analog video channels. In addition the RVG-SA1 supports four separate EDID interfaces, providing the ability to emulate displays. (+)

      Features:

      363759672405694361.jpg
      • Non-blocking, analog video cross point switch, 12 x 12
      • Up to 4 x RGBHV external video ports
      • 4x EDID ports to support computer inputs
    • Software Defined Radio & EW System
      Curtiss-Wright’s mid-size SDR and EW System enables customers to select their preferred RF tuner and software applications (i.e. GNU Radio, Red Hawk or SCA). By provides up to sixteen analog inputs (12-bit up to 2 Gsps) and eight (14-bit < 2.8 Gsps output channels), the SDR and EW system is easily able to interface L-band or S-band RF frequencies. The SDR/EW is built using rugged COTS products and the system is qualified to MIL-STD-810 and MIL-STD-461 standards. (+)

      Features:

      3745809954057398615.jpg
      • COTS Software Defined Radio and Electronic Warfare System with RF tuner and software selectable by the system integrator
      • Intel Core i7 or Xeon Processor
      • 28VDC Power input per MIL-STD-704
    • DSP-Based Data Acquisition Sub-Systems
      A line of multiprocessor DSP boards and modules integrated into complete data acquisition subsystems (+)

      Features:

      10633.jpg
      • Designed for industrial process and control applications
      • Deliver from 6400 MIPS fixed point DSP performance up to 16 GFLOPS floating point performance in a single 6U VMEbus or CompactPCI slot
      • Based on Ixthos' CHAMP architecture
    • VPX3-534 3U VPX 6GSPS Tranceiver Card
      The VPX3-534 combines high-speed multi-channel analog IO, user programmable FPGA processing and local processing in a single 3U VPX slot for direct RF wideband processing to 6 Gsps. This card allows for a high performance single slot transceiver with two 6 Gsps 12bit channel, to over 6 GHz instantaneous analog bandwidth, but can also scale to larger system with many channel. The architecture is optimized for RADAR, Electronic Warfare (EW), Signal Intelligence (SIGINT), Radar Warning Receivers (RWR) and Software Defined Radio (SDR) applications. (+)

      Features:

      3928024634057507215.jpg
      • 3U VPX Analog I/O card with 2x 6Gsps/12b analog inputs (or 4x 3Gsps/12b)
      • Xilinx KU115 UltraScale user programmable FPGA
      • Xilinx ZU4 UltraScale+ Zynq
    • PMC-706
      A high-performance, ruggedized, feature-rich graphics PMC (+)

      Features:

      16660.jpg
      • ATI Technologies RADEON Mobility 9000 visual processor unit with: 64 Mbytes integrated high-speed DDR SDRAM, flexible power management capabilities, and hardware OpenGL acceleration
      • Dual independent analog and digital video output: NTSC, PAL, RS-170, and S-Video, non-interlaced analog, LVDS supporting OpenLDI/FlatLink and Barco, DVI/TMDS
      • Analog outputs support separate horizontal and vertical, composite, or sync on red/green/blue
    • PMC-704
      PMC-704 is a PCI Mezzanine Card (PMC) form factor, ruggedized, high-performance, feature rich Graphics PMC designed, developed and supported by Dy 4 Systems (+)

      Features:

      • Mobility 9000 Visual Processor Unit
      • Dual independent video capture capabilities
      • Dual analog capture
    • DCU 4111 Data Concentrator Unit
      Designed to meet the most stringent aerospace requirements, the Curtiss-Wright Model 4111-1 Data Concentrator Unit (DCU) is a microprocessor based controller that receives a diverse assortment of inputs to process and format them into common digital data formats for consumption by various aircraft systems. The DCU design processes many digital communication protocols including EIA/TIA-422, ARINC 429 and Ethernet. (+)

      Features:

      320750269221207198.jpg
      • Rugged construction for military helicopter applications
      • Dual 28Vdc power Inputs normal and backup
      • Interfaces including: analog input, analog output, discrete arinc 429, ethernet, rs-232 [...]
    • XF07-518 Quad 500MSPS 14b Kintex-7 Digital Receiver XMC
      The XF07-518 is a rugged quad channel 500MSPS 14-bit digital receiver XMC. The ADC devices are controlled by a user programmable Xilinx FPGA which allows high performance processing such as Digital Down Conversion (DDC), filtering and custom algorithms. Digital data IO ports are provided for additional control with a combination of LVDS and RS485 compliant signalling over XMC P16/PMC P14 IO. Multi-channel, multi-board synchronization is supported on the XF07-518 as well as a choice of using external or onboard programmable sample clock generator. The XF07-518 Kintex-7 FPGA XMC is available in air and conduction-cooled build variants. The combination of direct high-speed, high resolution analog I/O port and next generation FPGA processing makes the XF07-518 ideal for demanding applications including radar, imaging and test equipment across commercial and defense market spaces. FEATURES: 4x 500MSPS 14-bit analog input (MMCX) - Trigger in/trigger out (MMCX) - 160-500MHz external sample clock input (MMCX) - Onboard programmable sample clock generator - User programmable Xilinx Kintex-7 K325T (-2) FPGA - PMC P14 digital IO: 32-differential digital IO pairs (LVDS+RS485) - XMC P16 digital IO: 20 differential pairs + 38 single ended digital (LVDS+RS485) - Two banks of 128M x 16bit DDR3 SDRAM - 1Gbit FLASH for FPGA configuration - VxWorks and Linux support - FusionXF support for VxWorks and Linux (contact factory for Windows) - XMC (x8 PCIe) format - Air-cooled (AC L0, AC L100) or Conduction-cooled (CC L200) - DDC options [...] (+)

      Features:

    • XF07-518 Quad 500MSPS 14b Kintex-7 Digital Receiver XMC
      The XF07-518 is a rugged quad channel 500MSPS 14-bit digital receiver XMC. The ADC devices are controlled by a user programmable Xilinx FPGA which allows high performance processing such as Digital Down Conversion (DDC), filtering and custom algorithms. Digital data IO ports are provided for additional control with a combination of LVDS and RS485 compliant signalling over XMC P16/PMC P14 IO. Multi-channel, multi-board synchronization is supported on the XF07-518 as well as a choice of using external or onboard programmable sample clock generator. The XF07-518 Kintex-7 FPGA XMC is available in air and conduction-cooled build variants. The combination of direct high-speed, high resolution analog I/O port and next generation FPGA processing makes the XF07-518 ideal for demanding applications including radar, imaging and test equipment across commercial and defense market spaces. FEATURES: 4x 500MSPS 14-bit analog input (MMCX) - Trigger in/trigger out (MMCX) - 160-500MHz external sample clock input (MMCX) - Onboard programmable sample clock generator - User programmable Xilinx Kintex-7 K325T (-2) FPGA - PMC P14 digital IO: 32-differential digital IO pairs (LVDS+RS485) - XMC P16 digital IO: 20 differential pairs + 38 single ended digital (LVDS+RS485) - Two banks of 128M x 16bit DDR3 SDRAM - 1Gbit FLASH for FPGA configuration - VxWorks and Linux support - FusionXF support for VxWorks and Linux (contact factory for Windows) - XMC (x8 PCIe) format - Air-cooled (AC L0, AC L100) or Conduction-cooled (CC L200) - DDC options [...] (+)

      Features:

    • VPX3-4731 3U VPX Video Processor GPU
      The VPX3-4731 rugged NVIDIA Quadro Pascal P5000 based video processing 3U OpenVPX card was designed for high-performance video ingest, processing, and display applications. The 3U VPX module can capture up to 6 simultaneous video streams from analog and digital sources, and provides up to 4 simultaneous display outputs to DisplayPortâ„¢, DVI, HD/3G-SDI or analog CVBS output interfaces. (+)

      Features:

      4004092604058472488.jpg
      • NVIDIA Quadro Pascal P5000 Graphics / Video Processor in 3U OpenVPX form factor
      • 2048 CUDA cores, up to 6.2 TFLOPS
      • 16 GB GDDR5 256-bit graphics memory
    • PMC-704 Graphics
      PMC-704 - dual I/O graphics PMC (+)

      Features:

      • ATI Technologies RADEON Mobility 9000 Visual Processor
      • Dual independent video capture capabilities
      • Dual independent analog and digital video output
    • Osiris Radar Input
      A high-performance, dual channel radar interface board that accepts and processes analog and digital radar signals (+)

      Features:

      34877.jpg
      • Provides a PCI interface to applications
      • Dual-channel radar interface card
      • PMC or half-length PCI form factors
  • Cypress Semiconductor  (1)
    • PSoC 4
      PSoC 4 is a custom mixed-signal SoC with programmable analog and digital blocks combined with flexible routing and interconnects (+)

      Features:

      • A new Programmable System-on-Chip (PSoC) architecture from Cypress Semiconductor combines analog and digital fabric with CapSense capacitive touch technology and the 32-bit ARM Cortex-M0 core
      • PSoC 4 is a custom mixed-signal SoC with programmable analog and digital blocks combined with flexible routing and interconnects
      • For analog input, the chip features a high-performance successive-approximation analog-to-digital converter with 12-bit resolution sampling at 1 Msps
  • Dallas Logic Corporation  (1)
    • FMC-ADC01
      A four-channel analog signal capture board based on Texas Instrument's ADS64xx family of analog-to-digital converters (ADCs) (+)

      Features:

      • Supports both 12- and 14-bit devices with sample rates ranging from 65 MSps to 125 MSps
      • Seven front bezel MMCX connectors and a low pin count (LPC) FMC connector provide the module's off-board connectivity
      • In addition to the four A/D inputs, the module has an external clock input, synchronization input, and synchronization output
  • Diamond Systems Corporation  (12)
    • DS-MPE-DAQ0804
      The DS-MPE-DAQ0804 offers 8 16-bit analog input channels, 4 16-bit analog output channels, and 21 configurable digital I/O lines in a PCIe MiniCard form factor with an extended operating temperature of -40oC to +85oC. The analog inputs offer single-ended and true differential capability, 4 programmable input ranges, and 100 KHz aggregate sample rate. Outstanding features of the DS-MPE-DAQ0804 analog input circuitry include an integrated programmable timer to control A/D sample rates automatically, resulting in precise timing plus significantly reduced processor overhead compared to software polling techniques. The 2048-sample data FIFO with programmable interrupt threshold further reduces processor overhead by reducing the interrupt rate required to transfer data from the board to the application. With these features DS-MPE-DAQ0804 can offer accurate, full-speed performance in any single-board computer regardless of processor speed. The 16-bit analog outputs offer 2 programmable output voltage ranges. An integrated precision, low-drift voltage reference ensures a lifetime of accurate performance across the full operating temperature range. A built-in waveform generator with 2K sample buffer enables the board to be used in stimulus applications such as sonar, laser light control, and other applications. The 21 buffered digital I/O lines feature programmable direction in groups of 4, 6, and 8 bits. The digital I/O lines can also be configured as either 24-bit pulse width modulators or 32-bit counter/timers, driven by the on-board 50 MHz clock. FEATURES: 8 single ended or 4 differential 16-bit analog inputs Maximum aggregate sample rate of 100 KHz Analog input ranges of +/-10V, +/-5V, 0-10V, 0-5V 4 16-bit analog outputs Analog output ranges of 0-5V and 0-2.5V 21 buffered digital I/O lines, individual direction control & protection Digital I/O lines optionally configurable as: o 4 24-bit pulse width modulators or o 8 32-bit programmable counter/timers Utilizes PCIe link on Minicard socket Support for Windows Embedded Standard 7, XP, CE and Linux 2.6.xx Diamond’s Universal Driver software supports all functions Rugged design: -40oC to +85oC operating temperature PCIe MiniCard form-factor: (2 x 1.18 in. / 50.95 x 30mm) [...] (+)

      Features:

    • Diamond-MM-48-AT
      A PC/104, autocalibrating analog I/O board (+)

      Features:

      15962.jpg
      • 16 analog inputs, 16-bit A/D
      • 200 KHz maximum sampling rate
      • 2-Kbyte A/D sample FIFO
    • Diamond-MM
      A 12-bit, 16-channel analog I/O PC/104 board (+)

      Features:

      • 16 single-ended or 8 differential analog inputs
      • 12-bit A/D resolution
      • Multiple bipolar and unipolar input range
    • Ruby-MM-1616AP-XT
      The Ruby-MM-1616A family provides up to 16 channels of 16-bit resolution analog outputs with either voltage and/or current outputs. The modules also provide 48 lines of digital I/O, a waveform generator, 4 pulse width modulators, 2 counter/timers, and HART signal handling capability on four channels. This new family of analog output modules provides the highest accuracy analog outputs, making them ideal for embedded and OEM applications needing analog output with digital I/O. (+)

      Features:

      238154878641804264.jpg
      • 4, 8, or 16 16-bit analog outputs
      • Independent voltage and/or current outputs
      • 48 digital I/O lines
    • Ruby-MM
      A 12-bit analog output PC/104 module (+)

      Features:

      • Four or eight analog outputs
      • 12-bit D/A resolution
      • Multiple bipolar and unipolar output ranges: ±10V, ±5V, ±2,5V, 0-10V, 0-5V, 0-2.5V
    • Diamond-MM-16-AT
      16-channel 16-bit A/D, 4-channel 12-bit D/A, 16 digital I/O, two counter/timers (+)

      Features:

      7363.jpg
      • Autocalibration provides maximum accuracy at all times regardless of time or temperature
      • Available with four optional analog output channels
      • Free Universal Driver software for Linux, Windows 98/2000/XP/XPe/CE .NET, DOS, QNX, and VxWorks
    • DMM-32X-AT
      32-channel, 16-bit A/D, 4-channel, 12-bit D/A, 24 digital I/O, two counter/timers (+)

      Features:

      • Automatic Autocalibration (patented) provides maximum accuracy at all times regardless of time or temperature
      • RS-232/485 serial port and microcontroller enable standalone operation without a CPU for low-cost applications
      • 100 percent backward compatible with industry-leading DMM-32-AT analog I/O board
    • Diamond-MM-32X-AT
      32-channel, 16-bit A/D, 4-channel 12-bit D/A, 24 digital I/O, 2 counter/timers (+)

      Features:

      20577.jpg
      • Automatic Autocalibration provides maximum accuracy at all times regardless of time or temperature
      • RS-232/485 serial port and microcontroller enable standalone operation without a CPU for low-cost applications
      • 100 percent backward compatible with industry-leading DMM-32-AT analog I/O board
    • Ruby-MM-1612
      High-density analog output module provides sixteen 12-bit resolution analog voltage outputs with 4 quad D/A converter ICs (+)

      Features:

      • Allows output resolutions as low as 0.6mV (0-2.5V output range)
      • Each output can drive or sink up to 5mA
      • Offers multiple output ranges, 16 digital I/O lines, +5V and extended temperature operation [...]
    • Diamond MM Family
      16-or 32 12-bit or 16-bit analog inputs, 2- or 4 12-bit analog outputs, with programmable input ranges (+)

      Features:

      • 100 KHz or 250 KHz sample rate with up to 1K sample FIFO
      • 16 or 24 digital I/O lines
      • Available with autocalibration for high accuracy across the entire operating temperature range
    • Ruby-MM-416
      16-bit, 4-channel analog output module features 4 analog voltage outputs with 1-bit resolution and 24 digital I/O lines for general purpose device interface (+)

      Features:

      • +5V only operation [...]
    • Helios
      A ruggedized, compact, low-power, and low-cost PC/104 SBC (+)

      Features:

      41250.jpg
      • Utilizes the DMP Vortex86SX/DX single-chip processor operating at up to 800 MHz
      • Up to 256 MB of DRAM soldered onboard
      • Offers standard PC peripheral features, including four USB 2.0 ports, one 10/100BASE-T Ethernet interface, four RS-232 ports (two with RS-232/422/485 capability), an IDE interface, and VGA/LCD graphics
  • Electromate  (1)
    • RIO Pocket PLC
      Galil's Pocket PLC is smart, compact, low-cost, and packed with I/O — 32 digital and 16 analog I/O in a 3.9 x 4.3 x 1.3 in. package (+)

      Features:

      46878.jpg
      • Intelligent, Remote Ethernet I/O Controller
      • (1) 10/100 Base-T Ethernet port(1) RS232 port up to 115/19.2 kbaud
      • 8 analog inputs with 12-bit ADC (16-bit option), +/-10V, +/-5V, 0-5V, 010V
  • EWA, Inc.  (2)
    • ADX 1480-4
      The ADX1480-4 offers four high speed analog-to-digital converter (ADC) channels on a single 6U VME Module. Each channel includes a 14-bit ADC with sampling rates to 80 MHz. (+)

      Features:

      • 4 Channels
      • Single-slot, 6U VME
      • 80 MHz, 14-bit sampling
    • RDS-200
      A real-time digital synthesis module (+)

      Features:

      • Single-slot 6U VMEbus module
      • Based on Analog Devices' AD9852 DDS chip
      • Supports 8 channels of real-time programmable IF outputs
  • Extreme Engineering Solutions (X-ES)  (1)
    • XCalibur5090
      The XCalibur5090 is a high-performance, reconfigurable, conduction-cooled 6U LRM module featuring dual Xilinx Virtex-7 FPGAs, high-speed serial interfaces, DAC and ADC channels, external memory, and flexible, high-density I/O. The XCalibur5090 utilizes four AD9739 and two ADC12D1600RF to provide four channels of high-frequency 14-bit Digital Analog Conversion (DAC) at 2500 Mbps and four channels of 12-bit Analog Digital Conversion (ADC) at 3200 Mbps for high-performance Digital Signal Processing (DSP). (+)

      Features:

      314776900022905961.jpg
      • Two Xilinx Virtex-7 XC7VX690T FPGAs
      • Up to 1 GB of DDR3 SDRAM per FPGA in two channels
      • Non-volatile FPGA configuration flash
  • General Standards Corporation  (15 of 37)
    • cPCI66-16AISS8AO4
      12-channel, 16-bit PMC analog input/output board with eight simultaneously sampled analog inputs, four analog outputs, and input sampling rates to 2.0 MSPS per channel (+)

      Features:

      • Analog inputs: 8 differential analog inputs with dedicated 16-bit ADC per channel; true simultaneous sampling of all Inputs to 2.0 MSPS per channel
      • Analog outputs: 4 single-ended analog outputs with dedicated 16-Bit DAC per channel; Simultaneous output clocking rates to 1.0 MSPS per channel
      • Selectable Input/Output ranges: ±10V, ±5V, ±2.5V
    • PMC66-16AISS8AO4
      12-Channel, 16-Bit PMC Analog Input/Output Board with eight simultaneously sampled analog Inputs, four analog outputs, and Input Sampling Rates to 2.0 Msps per channel (+)

      Features:

      35127.jpg
      • Analog Inputs: 8 Differential Analog Inputs with Dedicated 16-Bit ADC per Channel; True Simultaneous Sampling of all Inputs to 2.0 Msps per channel
      • Analog Outputs: 4 Single-Ended Analog Outputs with Dedicated 16-Bit DAC per Channel; Simultaneous Output Clocking Rates to 1.0 Msps per Channel
      • Selectable Input/Output Ranges: ±10V, ±5V, ±2.5V
    • CPCI-12AISS8AO4
      12-channel, 12-bit CompactPCI Analog Input/Output board with eight 2.0 MSPS per Channel Analog Inputs, simultaneous input sampling, wide-range analog inputs; ±100 mV to ±10 V Full-scale (+)

      Features:

      • 8 Differential Analog Inputs with Dedicated 12-Bit, 2.0 MSPS ADC per Channel
      • True Simultaneous Sampling of all Inputs; Minimum data skew
      • Sampling rates to 2.0 MSPS per Channel (16 MSPS Aggregate Rate)
    • CPCI-ADADIO
      A 12-channel analog I/O board that provides high-resolution 16-bit analog input, analog output, and digital I/O (+)

      Features:

      3520.jpg
      • Eight analog input channels are sampled simultaneously
      • Inputs can be sampled continuously or burst-sampled (up to 200,000 samples/channel for an aggregate rate of 1,600,000 samples/sec)
      • The inputs are converted and stored in a 32,000 sample FIFO buffer
    • PMC-ADADIO
      A 12-channel analog I/O PMC mezzanine (+)

      Features:

      • Provides 16-bit analog input, analog output, and digital I/O
      • Eight analog input channels are sampled simultaneously
      • Inputs can be sampled continuously or burst-sampled (up to 200 Ksamples/channel for an agregate rate of 1.6 Msamples/sec)
    • CPCI-16DSI-VHS
      A versatile multifunction analog I/O board (+)

      Features:

      • The board has 8 analog inputs and 8 analog outputs per board and supports arbitrary waveform generation
      • A single 16-bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000 sample storage FIFO
      • Up to 250,000 samples per second aggregate output update rates for the 8 D/A channels. Analog outputs are double-buffered and allow for software or hardware (synchronized) strobes for output updating
    • PC104P-16AIO88
      Versatile multifunction analog I/O board for PC/104-Plus (+)

      Features:

      • Eight analog inputs
      • Eight analog outputs per board
      • Supports arbitrary waveform generation
    • PC104P-VIDEO-AI2
      PC-104-Plus analog video input (+)

      Features:

      • Two video digitizers, FIFOs, and a DMA engine
      • Each video digitizer provides luminance and chrominance signal processing for NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, PAL BGHI, PAL N, PAL M, and SECAM
      • Once the interface has been initialized, it transfers frame-after-frame of video input to host memory without host intervention
    • PMC-16AIO88
      A multifunction analog I/O PMC board (+)

      Features:

      • Board has eight analog inputs and eight analog outputs and supports arbitrary waveform generation
      • A single 16-bit scanning ADC scans eight single-ended or four differential inputs at an aggregate rate of 72,500 samples/sec into the 32,000-sample storage FIFO
      • Up to 250,000 samples/sec aggregate output update rates for the eight D/A channels
    • 24DSI16WRC
      The 16-channel 24DSI16WRC analog input module provides high-density 24-bit analog input resources on a standard single-width PMC. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. (+)

      Features:

      292763604861575915.jpg
      • Any PMC board can be used on PCI Express, PCI-X, cPCI-X, PCI, cPCI, PC/104-Plus via an adapter.
      • 16 wide-range differential 24-Bit simultaneously-sampled analog input channels.
      • Input sample rates to 105 Kilosamples per second per channel.
    • PMC-12AISS8AO4
      A 12-channel analog I/O PMC board (+)

      Features:

      • Provides eight differential analog outputs with dedicated 12-bit and 2.0 Msamples/sec ADC per channel
      • Four analog output channels 12-bit DAC per channel and 1.0 Msample/sec clocking
      • Provides a 16-bit bi-directional digital I/O port
    • cPCI-12AISS44AO4
      12-channel, 12-bit PMC Analog Input/Output board with eight simultaneously sampled wide-range inputs at 2.0 MSPS per channel, four analog outputs, and 16-bit Digital I/O port (+)

      Features:

      • 8 differential analog Inputs with Dedicated 12-bit, 2.0 MSPS ADC per channel
      • True Simultaneous Sampling of all Inputs
      • Minimum data skew
    • PMC-12AISS44AO4
      12-Channel, 12-bit PMC analog input/output board with eight simultaneously sampled wide range Inputs at 2.0 MSPS per channel, four analog outputs, and 16-bit digital I/O port (+)

      Features:

      • 8 differential analog inputs with dedicated 12-bit, 2.0 MSPS ADC per channel
      • True simultaneous sampling of all Inputs; Minimum Data Skew
      • Sampling rates to 2.0 MSPS per channel (16 MSPS aggregate rate)
    • PC/104-ADADIO
      12-channel board for PC/104-Plus (+)

      Features:

      11893.jpg
      • High-resolution 16-bit analog input
      • Analog output and digital I/O
      • Samples eight analog input channels simultaneously
    • PMC66-16AISS16AO2
      16-Bit, 18-Channel, 1.0-MSPS PMC Analog Input/Output Board With 16 Simultaneously Sampled Analog Inputs, Two Analog Outputs, and Input Sampling Rates to 1.0 Msps per channel (+)

      Features:

      35126.jpg
      • The 16-Bit analog I/O module samples and digitizes 16 input channels simultaneously at rates up to 1.0 million samples per second per channel, and the resulting 16-bit sampled data is available to the PCI bus through a 256K-Sample FIFO buffer
      • Sampling can be controlled in groups of 1 through 16 channels, and the sample clock can be generated either from an internal rate generator, or by software or an external source
      • Both burst and continuous sampling modes are supported, and input ranges are software-selectable as ±10V, ±5V or ±2.5V
  • Innovative Integration  (9)
    • Andale Turnkey, High-Speed Data Acquisition Logger
      Powerful data logging system that directly controls an NTFS disk subsystem to support gap-free storage or playback of analog or digital signals acquired using the Innovative X-series XMC modules (+)

      Features:

      46508.jpg
      • The included logging software moves data in real-time between the analog or digital I/O peripherals on any Innovative XMC module to/from dedicated SATA drives with minimal intervention from application software or Windows
      • A multitude of analog/digital I/O interfaces are available through optional XMC modules
      • Up to four X5 (Virtex-5) or X6 (Virtex-6) or X3-series modules may be installed and operated simultaneously in the chassis
    • Andale Turnkey, High-Speed Data Acquisition Logger
      Powerful data logging system that directly controls an NTFS disk subsystem to support gap-free storage or playback of analog or digital signals acquired using the Innovative X-series XMC modules (+)

      Features:

      46508.jpg
      • The included logging software moves data in real-time between the analog or digital I/O peripherals on any Innovative XMC module to/from dedicated SATA drives with minimal intervention from application software or Windows
      • A multitude of analog/digital I/O interfaces are available through optional XMC modules
      • Up to four X5 (Virtex-5) or X6 (Virtex-6) or X3-series modules may be installed and operated simultaneously in the chassis
    • compactToro
      A DSP resource board for servo control and data acquisition applications requiring high-performance DSP with precision 16-bit analog (+)

      Features:

      • 16 channels Analog I/O
      • 16-bit 250-KHz Sampling 150-MHz TMS320C6713 DSP
      • 32/64-bit PCI interface is capable of up to 264 Mbytes/sec data bursts
    • K706 Rugged Miniature Digital Transceiver
      FMC-1000 plug-in module providing two antenna inputs and four independent channels of DDC, two channels of DUC, and one spectrum analyzer embedded in a Xilinx Kintex-7 FPGA. It supports monitoring and/or recording of wide- or narrow-band spectra or channelized IF band data. The transceiver supports contiguous recording at 160 MByte/s until running out of disk space. Each DDC has its own programmable tuner, programmable lowpass filtering, gain control, and decimation settings, supporting output bandwidth up-to 100 MHz. Perfect for Surveillance, Arbitrary Waveform Generator/Player, and Digital Receiver. Download datasheets & pricing now! (+)

      Features:

      346073161491315512.jpg
      • Two 14-bit, 1 GHz ADCs; analog bandwidth 1 GHz (AC Coupled) Two 16-bit, 1 GHz DACs; analog bandwidth 1 GHz (AC Coupled)
      • Xilinx Kintex-7 K410T2 FPGA Intel Atom Quad Core, 8 GB RAM, 1GbE Sustained logging rate up-to 300 MByte/s
      • Embedded power meter Optional GPS 10 MHz ref clock/PPS
    • SR25
      A PCI plug-in card featuring two successive approximation SAR, 16-bit D/A channels (+)

      Features:

      • All I/O Synchronously Sampled via Sequencer
      • Three 16-bit Input Channels
      • Two Analog Inputs: Prog. +/- 0.2, 1.0, 2.0V spans >90 dB SFDR, >85 dB SNR · 16 LVTTL Digital Inputs · 128 MB Capture Memory
    • Andale DataRecorder
      Powerful data logging system which directly controls an NTFS disk subsystem to support gap-free storage or playback of analog or digital signal (+)

      Features:

      37771.jpg
      • Turnkey, High-Speed Data Acquisition and Storage Internal 2 or 8 TB Hard Disk Array
      • Expandable storage via external JBOD
      • 700 MBps sustained performance from analog or digital I/O module to standard NTFS disk files
    • Andale Recorder
      A powerful data logging system which directly controls an NTFS disk subsystem to support gap-free storage or playback of analog or digital signals. 700 MBps sustained performance! (+)

      Features:

      37599.jpg
      • Turnkey, high-speed data acquisition and storage — internal 2 or 8 TB Hard Disk Array — expandable storage via external JBOD
      • 700 MBps sustained performance from analog or digital I/O module to standard NTFS disk files
      • Supports all Innovative X3 and X5 IO module features including triggering and timing features. Log anything from RF receivers to industrial control signals
    • PCI Express X5 & X3 XMC Product Family
      The X3 and X5 module families feature high-performance analog and digital I/O on a standard PMC module format with a flexible PCI Express host interface bus (+)

      Features:

      45484.jpg
      • Virtex-5 FPGA – SXT or LXT
      • QDR SRAM and DDR2 DRAM memory pools
      • PCI Express, 8 lane interface
    • cToro
      150-MHz TMS320C6713 DSP (floating point) (+)

      Features:

      • 16 independent analog I/O channels to 250 Ksamples/sec
      • 64 bits digital I/O
      • CompactPCI 64/32-bit, 33-MHz, 5 V/3.3 V
  • Kontron  (4)
    • VDAD
      Offers a complete two-way analog/digital measurement system with ADC, DAC, digital I/O, and an additional option of signal conditioning onboard (+)

      Features:

      • Onboard storage of individual calibration data
      • Software support under both OS9 and VxWorks
      • 16 SE or eight different input channels, opto-isol. opt.
    • VADI-4
      The VADI-4 is a 16-channel analog/digital converter card; sampling with 12-bit resolution at a rate of up to 300 kSamples/sec; input can be scaled to one of four voltage ranges and amplified by three gains before converting them; optional plug-in modules condition the input signals before conversion; simultaneous sampling of all channels is supported (+)

      Features:

      • The VADI-4 has software support under both OS9 and VxWorks
      • 16 SE or 8 differential input channels
      • Input: 0..5 V,0..10 V,+/-10 V,0..20 mA
    • PB-ADC3
      Eight analog channels (+)

      Features:

      • 12-bit resolution
      • Unipolar or bipolar voltage ranges
      • Conversion time is 43 µsec
    • AIM-12/-16
      16 and 12-bit, 16-channel, 100 KHz analog input modules with 8 differential or 16 single-ended inputs (+)

      Features:

      • Onboard programmable-gain amplifier provides bipolar or unipolar input range of 0V, 5V, 2.5V, and 1.25V (AIM-16) or 10V, 1V, and 100mV (AIM-12)
      • Software selectable input ranges, DMA and interrupt operation, flexible triggering capabilities, and 16 digital I/O lines [...]
  • Measurement Computing Corporation  (15 of 17)
    • PCI-DAS4020/12
      A PCI bus-compatible, 4-channel, 12-bit analog input board with two analog output channels (+)

      Features:

      • 20-MHz sample rate
      • 12-bit A/D resolution
      • Four analog input channels
    • CPCI-DAS4020/12
      An analog input board with four 20 MHz, 12-bit analog inputs (+)

      Features:

      • Each input channel has an independent A/D converter that allows the sampling of all four inputs simultaneously at 20 MHz
      • Plug-and-play compatible
      • Board addresses and interrupt channels are set by software
    • PMD-1608FS
      A USB-based DAQ module (+)

      Features:

      17489.jpg
      • Eight simultaneously sampled, 16-bit analog inputs with continuous multichannel sample rates up to 100 KS/s and burst sample rates up to 200 KS/s
      • 8 bits of digital I/O and a 32-bit counter
      • 8 independent 50 KHz A/D converters, 1 per analog input
    • USB-1616FS
      A USB-based analog and digital I/O module (+)

      Features:

      • 16 single-ended analog inputs
      • 16-bit resolution
      • Simultaneous input sampling (one A/D converter per input)
    • PMD-1024HLS
      A USB–based analog and digital I/O interface (+)

      Features:

      17778.jpg
      • Fully compatible with USB 1.1 as well as USB 2.0
      • Provides 24-bits of high-current digital I/O
      • Up to 15mA of source and 64mA of sink current
    • AI-EXP32
      The AI-EXP32 doubles the analog input capacity of either of the USB-2416 series modules from Measurement Computing (+)

      Features:

      • 16 differential or 32 single-ended analog inputs
      • 24-bit resolution
      • Nine software-selectable ranges: ±20 V, ±10 V, ±5 V, ±2.5 V, ±1.25 V, ±0.625 V, ±0.312 V, ±0.156 V, and ±0.078 V
    • LGR-5320 Series
      Stand-Alone, High-Speed, Multifunction Data Loggers (+)

      Features:

      • Up to 200 kS/s correlated sampling of all data
      • 16 analog inputs up to ±30 V
      • 16-bit resolution
    • PCI-DAS6031
      64 channels of 16-bit A/D resolution (+)

      Features:

      • 100 kS/s maximum sample rate
      • 8 digital I/O bits and 2 counter/timers
      • Triggering of measurement and control via both analog and digital signals
    • PC104-DAS08
      A PC/104 form factor, analog I/O module (+)

      Features:

      • Eight channel single-ended
      • 12-bit, 20 kHz A/D
      • Three counters
    • PMD-1208FS
      A high-speed, low-cost, USB-based Personal Measurement Device (PMD) (+)

      Features:

      18498.jpg
      • Fully compatible with USB 1.1 and 2.0
      • Supports Windows 98SE/Me/2000/XP
      • Eight single-ended or four differential analog inputs
    • PMD-1208LS
      A USB-based data acquisition module (+)

      Features:

      17875.jpg
      • Eight single-ended or four differential 12-bit analog inputs
      • two 10-bit analog outputs
      • One 32-bit external event counter
    • PCI-DAS6031
      A PCI form factor data acquisition card with identical specifications to the NI PCI-6031E (+)

      Features:

      • Provides 64 single-ended/32 differential channels of 16-bit (one part in 65536) analog input
      • Measurements on any of 14 input ranges can be taken at rates up to 100 KSps
      • Dual 16-bit analog outputs with 100 KSps per channel update rates
    • PCI-DAS6013
      A PCI analog I/O board (+)

      Features:

      17770.jpg
      • Provides 16 single-ended/8 differential channels of 16-bit analog input
      • Takes measurements on any of four bipolar input ranges at rates up to 200 KSps
      • Eight digital bi-directional control lines
    • PCI-DAS6070
      An analog I/O board (+)

      Features:

      17442.jpg
      • Functionally equivalent to National Instruments' PCI-MIO-16E-1 (6070 series)
      • Provides 16 single-ended/8 differential channels of 12-bit (one part in 4096) analog input
      • Allows measurements on any of 15 input ranges at rates up to 1.25 MS/s
    • PC104-DAS16Jr/12 and DAS16Jr/16
      A high-speed, 16-channel, 12- or 16-bit analog input with 4 digital in/4 digital out and 3 16-bit counters (+)

      Features:

      • PC/104 form factor
      • 16 single-ended inputs or 8 differential inputs
      • 160,000 sample/sec convert and transfer (12-bit)
  • Memec  (1)
    • P160 Communications Module 3 Kit
      Ideal for Xilinx embedded MicroBlaze eystems (+)

      Features:

      19946.jpg
      • Adds Ethernet, Bluetooth, and analog I/O to Popular Memec Spartan-3 LC Board
      • Small, low-cost daughter card form-factor
      • Enables designers to add a standard set of processor peripherals and bulk memory to any P160 compatible system board
  • Mercury Systems  (15 of 17)
    • Echotek Series DCM-V5-XMC
      A flexible FPGA-based architecture in a space-efficient mezzanine card form factor (+)

      Features:

      40594.jpg
      • User-programmable Virtex-5 FPGA functions as the primary data processor
      • Supported by Mercury's EchoCore firmware library
      • Two, single IF channel, Texas Instruments ADS6149 analog-to-digital converters
    • Echotek Series RF 1800GT
      An ultra high-performance wideband microwave receiver (+)

      Features:

      • Features a direct digital synthesizer, which uncouples tuning speed from phase noise
      • Highly suitable for signals intelligence and electronic warfare systems
      • Comprises two single-slot VME modules: the 1800RF radio frequency module and the 1800S synthesizer module; together, these modules form a microwave downconverter tunable over the entire 0.5 GHz to 18 GHz range, providing both narrowband and wideband outputs
    • ECDR-4814
      A 48-channel wideband/narrowband digital receiver with integrated analog input (+)

      Features:

      • 14-bit A/D
      • Four analog input channels using Analog Devices AD6644 A/D converter
      • 48 receiver channels operating at 70 Msamples/sec using GrayChip 4016 quad digital down converter chips
    • ECDR-214-PMC
      An A/D converter and digital drop receiver PMC mezzanine (+)

      Features:

      • Suitable for wideband and narrowband down conversion and filtering
      • Data decimation range from 2 to 16384
      • Analog signals are converted using Analog Device's AD6644, 14-bit, 65 MHz A/D converters
    • ECDR-GC812
      8 IF INPUTS TO FREQUENCIES UP TO 250 MHz (+)

      Features:

      • SIMULTANEOUS SAMPLING
      • EIGHT ANALOG TO DIGITAL CONVERTERS (ANALOG DEVICES AD9433, 12 BIT, 125 MSPS)
      • SFDR > 80 dB FS
    • ECDR-GC214-PCI
      FOUR DIGITAL RECEIVER CHANNELS ON A PCI SHORT CARD (+)

      Features:

      • TWO ANALOG INPUTS AT IF'S > 200 MHz USES AD6644/45 (14 BIT, 65/80 MHz) ANALOG/DIGITAL CONVERTERS
      • RECEIVER CHANNELS CAN BE COMBINED FOR WIDER BANDWIDTH
      • COHERENT ON-RECEIVE CAPABILITY FOR PULSED APPLICATIONS
    • ECDR-GC314
      A PCI bus-based wideband/narrowband, 12-channel, digital receiver family with integrated analog input (+)

      Features:

      • Boards accept three analog IF signals at frequencies up to 200 MHz, which are coherently digitized using 14-bit A/D converters at sampling rates up to 105 MHz
      • The SFDR of the A/D converters is in excess of 90 dBFS
      • Receivers can operate in three different modes: Raw A/D data mode, GC4016 receiver mode, or internal wideband receiver mode
    • MCP3 FCN
      A rugged, conduction-cooled 3U CompactPCI digital signal processing board (+)

      Features:

      20317.jpg
      • PowerPC 7447 @ 1 GHz
      • Virtex II Pro P40 FPGA Discovery II System Controller
      • Conduction cooled with options for air-cooled lab development
    • Echotek Series ECV4-2
      The ECV4-2, with input clock capability up to 1.5 GHz, is the highest performing digital receiver in an XMC form factor in the industry (+)

      Features:

      • Echotek Series products lead the mixed-signal industry in extracting clear signals from electronic clutter, forming a bridge between the realms of analog signals and digital processing. After an analog signal is received by an antennae or other sensor, it must be digitized and manipulated into a form amenable to signal processing. The challenge, and the key to successful applications, is to manage this transformation in real time while maintaining the integrity of the original signal
      • Processing power is delivered by a Xilinx Virtex-4 FPGA (field-programmable gate array). This FPGA allows users to run customized algorithms such as digital down/up conversion (wideband or narrowband), Fast Fourier Transforms (FFTs), and filtering directly on the ECV4-2. Modules are available in air-cooled or conduction-cooled versions [...]
    • ECDR-412
      4-channel wideband/narrowband digital receiver (+)

      Features:

      • Accepts two analog signals at 70 MHz for direct digitization via Analog Devices' AD6620 digital decimating receivers
      • Spur-free dynamic range of 100 dB
      • Programmable FIR filters with 256 taps at 65 MHz clock speed
    • ECDR-GC314-PCI
      TWELVE DIGITAL RECEIVER CHANNELS ON A PCI SHORT CARD (+)

      Features:

      • THREE ANALOG INPUTS AT IF'S > 200 MHz USES AD6645 (14 BIT, 105 MHz) ANALOG/DIGITAL CONVERTERS
      • SFDR >90 dB SINGLE TONE, ~100 TWO-TONE
      • RECEIVER CHANNELS CAN BE COMBINED FOR WIDER BANDWIDTH
    • ECDR-GC214-PCI/TS
      FOUR DIGITAL RECEIVER CHANNELS ON A PCI SHORT CARD (+)

      Features:

      • TWO ANALOG INPUTS AT IF'S > 200 MHz USES AD6644/45 (14 BIT, 65/80 MHz) ANALOG/DIGITAL CONVERTERS
      • RECEIVER CHANNELS CAN BE COMBINED FOR WIDER BANDWIDTH
      • SYNCHRONIZATION CONTROL OF MULTIPLE RECEIVER AND TRANSMITTER BOARDS
    • ECDR-1-1480-PMC
      14 BIT, 80 MSPS ANALOG TO DIGITAL CONVERTER (ANALOG DEVICES AD6645) (+)

      Features:

      • USER PROGRAMMABLE NUMERICALLY CONTROLLED OSCILLATOR
      • USER PROGRAMMABLE 63-TAP FIR FILTERS
      • 16K x 32 FIFO BUFFER FOR RECEIVER DATA. OTHER DEPTHS AVAILABLE
    • Digital Audio Engine (DAE)
      An OEM surround-sound decoding module (+)

      Features:

      • High quality 6-channel or 8-channel analog output
      • Motorola DSP56362 processor
      • Decodes DTS, Dolby Digital, and PCM bitstreams
    • ECV4-4
      A series of digital receivers (+)

      Features:

      30736.jpg
      • FPGA-based
      • Available in 6U VME and 6U VXS form factors, with options for digital receivers and transceivers covering multiple frequency bands
      • Extracts clear signals from electronic clutter
  • Micro/sys, Inc.  (9)
    • SBC0489
      A single board solution in a 5” x 5” footprint (+)

      Features:

      • Implemented with the STPC Atlas processor, with speeds from 66 MHz to 133 MHz, on-chip cache, 64-bit DRAM access, hardware floating point, and AT-compatible interrupt, timer, and DMA controllers
      • Includes COM1, COM2, LPT1, SuperVGA, keyboard, mouse, floppy, IDE, and an 8” x 8” matrix touchscreen or keypad interface
      • Includes digital I/O, analog-to-digital converters, digital-to-analog converters, and Ethernet support for 10Base-T and 100Base-T
    • SBC2590
      A PC/104-Plus Pentium SBC with industrial I/O and Ethernet for diskless, unattended embedded controller applications (+)

      Features:

      11847.jpg
      • Intel 430TX chipset
      • 8" x 5.75" EBX standard
      • 100 MHz to 266 MHz
    • MPC560
      A PC/104 I/O module (+)

      Features:

      14715.jpg
      • Includes 32 channels of 16-bit analog-to-digital input and four channels of 14-bit digital-to-analog output
      • The analog input subsystem includes programmable gain amplifiers, programmable low pass filters, a 16-channel differential input mode, and input overvoltage protection ±40V, with power on or off
      • Analog output system includes one-pole low-pass filters, and output buffers capable of driving cables and other highly capacitive loads
    • MPC624
      A PC/104 expansion board (+)

      Features:

      17772.jpg
      • 24-bit Delta-Sigma A/D converter
      • Multichannel with single cycle settling
      • Fault protection on analog/digital
    • MPC550
      Analog, digital, and timer I/O for PC/104 (+)

      Features:

      • 16 12-bit channels of analog input
      • 100 kHz A/D sampling rate
      • Software selectable A/D input ranges
    • MPC555 Analog, Digital, Timer I/O for PC/104
      Sixteen 12-bit channels of analog imput (+)

      Features:

      • 100kHz A/D sampling rate
      • Software selectable A/D input ranges
      • 24 digital I/O lines
    • MPC500
      General purpose combination interface for PC/104 (+)

      Features:

      • 31 TTL I/O, one 0 to 5V analog input, one 0 to 5V analog output
      • Direct connect to signal conditioning module racks
      • PAMUX compatible connector for both analog and digital I/O on ribbon cable
    • OPTO104
      An optically Isolated Analog and Digital I/O Module Rack On EPIC footprint (+)

      Features:

      • Designed for use in rugged, industrial systems where analog and digital I/O require high-voltage isolation
      • Accepts up to eight G4 or G5 OPTO modules for isolated digital and analog I/O
      • Remote slave OPTO104 boards can be added via a ribbon cable
    • Trio of PC/104 Microcontrollers
      Choose between 3 different powerful microcontrollers on a PC/104 form factor to replace legacy multi-card stacks. Each board offers a unique combination of industrial I/O. The core of the board is running a PIC32 at 80MHz. Each board includes analog and digital I/O, Ethernet, USB, CAN, serial ports, and different power options. Extended temperature, RoHS operation is standard. Code Warrior programing plus sample code eases porting. Each board is $250 Qty.1 with OEM discounts available. Pick the one that works best for your application. (+)

      Features:

      313753752444907858.jpg
      • Ethernet, CAN and serial ports on low PC/104 Microntroller
      • Analog, digital I/O in mutliple industrial configurations
      • PIC32 running at 80MHz
  • Nallatech  (2)
    • BenADDA-V4
      Virtex-4, Dual 105 MSps ADC, Dual 160 MSps DAC DIME-II Module (+)

      Features:

      31732.jpg
      • Suited for applications requiring high-speed analog capture and the processing performance of an on-board FPGA
      • Combining an Xilinx Virtex-4 SX or LX FPGA, two analog input channels, two analog output channels, and two banks of DDR-II SRAM, the module provides processing, analog I/O, and memory expansion capability
      • The direct coupling and high density coupling of processing, memory in less space makes design implementation easier [...]
    • BenADC-V4
      Virtex-4/Quad 250 MSps Analog Capture Module (+)

      Features:

      31733.jpg
      • Suitable for applications requiring high-speed analog capture and the on-board FPGA
      • Combining an Xilinx Virtex-4 SX or LX FPGA, four high speed analog capture channels, and two banks of DDR-II SRAM, the module provides processing, analog I/O, and memory expansion capability
      • The high density of processing and analog capture enables systems to be implemented in less space and makes design implementation easier
  • National Semiconductor  (3)
    • ADC12040
      A monolithic CMOS analog-to-digital converter (+)

      Features:

      • Converts analog input signals into 12-bit digital words at a minimum of 40 MSPS
      • Uses a differential, pipelined architecture with digital error correction and an on-chip sample-and-hold circuit to minimize die size and power consumption
      • Operates on a single 5V power supply
    • ADC08200
      A low-power 8-bit monolithic analog-to-digital converter with an on-chip track and hold (+)

      Features:

      • Operates at conversion rates up to 230 MSPS
      • Achieves 7.3 effective bits with 50 MHz input frequency
      • Typically consumes 210mW at 200 MSPS
    • LM96511
      Eight-channel transmit/receive system (+)

      Features:

      46222.jpg
      • Four ICs including an Analog Front End (AFE), transmit/receive switch, transmit pulser, and transmit beamformer
      • National claims this AFE has the highest-resolution digital variable gain amp available, with better channel-to-channel matching and higher spectral performance than analog-only solutions
      • An evaluation kit for the transmit/receive system includes WaveVision 5 software [...]
  • Nuvoton Technology  (1)
    • WAU8812
      Mono audio Codec for VoIP-telephone, hands-free telephony markets; provides flexibility in performance and power consumption (+)

      Features:

      38376.jpg
      • Robust, high-fidelity, 24-bit signal architecture
      • 93dB Digital-to-Analog Converter (DAC), Signal to Noise Ratio (SNR), and 91dB Analog-to-Digital Converter (ADC) SNR at audio sampling rates from 8 KHz to 48 KHz
      • Industry-leading 6uA standby current, which greatly reduces power consumption and extends battery life in hand-held applications
  • Precision Analog Systems (PAS)  (14)
    • PAS 9816/RO
      A 16-channel, 16- bit VME-based analog output card (+)

      Features:

      • Each of the 16 channels provides a dedicated 16-bit digital-to-analog converter (DAC)
      • Output voltage is +/- 10 V at 5 mA of output current
      • Double buffered DAC input registers allow all DAC outputs to be updated simultaneously
    • PAS 9737/AI
      64 differential analog input channels (+)

      Features:

      • Differential or single ended inputs jumper configurable per channel
      • Optional low pass filters with corner frequencies of 10 Hz, 50 Hz, 100 Hz or 500 Hz
      • Analog inputs on 2 ea. 64 position connectors, allows the use of mass termination cable
    • PAS 9710/AO
      8 Channels of +/- 10 Volt Analog Outputs (+)

      Features:

      • 14 bit resolution, 14 bit linear Digital to Analog Converter (DAC) per channel
      • Output current of +/- 5 mAmps per channel, Output Impedance of 0.1 Ohm
      • Settling time of 2 uSec for full scale voltage step
    • PAS 9416/AO & 9418/AO
      16 analog amplifiers with offset voltage circuits (+)

      Features:

      • Pin compatible with Precision Analog Systems' 9716/AO 16-channel, 16-bit analog output board
      • Using the combination of these two cards, a VMEbus-based analog output system can be constructed that will supply up to ±85V and up to 50 mA of output current per channel [...]
    • PAS 9716/AO
      A 16-channel, 16-bit analog output board (+)

      Features:

      • Each channel has a separate D/A converter and provides a ±10V output range
      • Two D/A channels can be updated with a single 32-bit-wide VMEbus write operation
      • D/A converters reset to zero during powerup
    • PAS 9422/AO
      Sixteen high power amplifier circuits on a 6U format card (+)

      Features:

      • Compatible with the PAS 9716/AO, 16 channel, 16 bit Analog Output card and the PAS 9715/AO, 32 channel, 12 bit Analog Output card
      • Will supply up to +/- 210 Volts and up to 200 mAmps of output current
      • Amplifiers can be configured for either inverting or non-inverting operation, with soldered in jumpers [...]
    • 9716/AO
      Sixteen ±10V analog output channels with a 14-bit linear D/A converter per channel (+)

      Features:

      • Output current of ±5 mA
      • Output impedance 0.1 Ω
      • Output short circuit proof to analog ground
    • PAS 9732/AI
      8 channel, 0 to 10 Volt (9732) or +/- 10 Volt (9732-001), 14 bit Analog Input Card 3 MHz per channel continuous sampling on all channels (+)

      Features:

      • VME 6U form factor; 233 mm x 160 mm card size
      • VME access: D32, D16; A32, A24, A16
      • Right justified sixteen bit integer data. Digital input looks like contiguous memory
    • PAS 9915/AO
      VME Analog Output Card (+)

      Features:

      • Provides 32, 12-bit analog voltage output channels on a 6U VMEbus card
      • DAC resolution: 12 bits
      • VME Interface: A32, A24, A16; D32, D16 slave, no interrupts
    • PAS9715/AO
      A 32-channel, 12-bit resolution D/A converter board (+)

      Features:

      • Each channel has a separate D/A and provides six program-selectable output ranges from ±10V to 0-2.5V
      • Supports full 32-bit VMEbus address space
      • 16-bit and 32-bit data transfers
    • PAS 9739/AI
      Thirty-nine channel, photodetector and dual gain analog input card (+)

      Features:

      • Dual gain amplifiers provide high and low sensitivity outputs for each photodiode
      • Thirteen synchronously scanning ADC chips
      • High and low sensitivity outputs of each channel are converted simultaneously
    • PAS 9722/AI
      Analog input board (+)

      Features:

      • 4 or 8 channels
      • 12-bit resolution
      • Samples at 800 KHz per channel
    • PAS 9731/AI
      8 channel, 14-bit resolution, 2 MHz per channel A/D converter board (+)

      Features:

      • Input voltage range of ±10V
      • 32-bit VMEbus interface allows two channels to be read with one transfer
      • No VMEbus interrupts [...]
    • PAS 9416/AO
      16 Amplified and Offset Channels (+)

      Features:

      • Output Drive of up to +/- 35Volts and +/- 20 mAmps
      • Gain of 1 or 2 Jumper Selectable
      • External Supply Voltage of +/- 15 Volts to +/- 45 Volts
  • Signatec, Inc.  (1)
    • SIG-PRG
      Portable high-speed data acquisition and waveform generation systems: 2 analog A/D channels at up to 160 MHz sampling rate, 2 analog I&Q D/A channels, bandwidth 100 KHz to 600 MHz (+)

      Features:

      42051.jpg
      • Two analog signal recording channels at up to 160 MHz sampling rate
      • Two analog I&Q waveform generation channels at up to 1 GHz sampling rate
      • 16-bit resolution for both the A/D and D/A channels
  • SSV Software Systems GmbH  (3)
    • AIO104-20
      A PC/104-based analog I/O board (+)

      Features:

      • 2-channel
      • 12-bit DAC
      • 0V to 10V
    • AIO104-10
      A PC/104-based analog I/O board (+)

      Features:

      • 16-channel
      • 12-bit ADC
      • 0V to 10V
    • AIO104-30
      A PC/104-based analog I/O board (+)

      Features:

      • 16 channels of 12-bit ADC
      • Two channels of 12-bit DAC
      • Eight digital inputs
  • Technobox, Inc.  (1)
    • 2677
      A 2-channel, 12-bit, 10 Msamples/sec, A/D converter with antialiasing filter (+)

      Features:

      • Single-wide PMC card form factor
      • Two bipolar, single-ended analog inputs are passed through analog filters to provide initial band limiting
      • Signals are sampled at 20 Msamples/sec and the digital output of each A/D converter is passed through a decimation by 2 function which effectively reduces the sample rate to 10 Msamples/sec
  • Technologic Systems  (1)
    • AtoD/DAC Board (TS-9700)
      Eight-channel 12-bit analog-to-digital converter with 0.2% analog reference (+)

      Features:

      • AtoD input 0 to 2.5 V, 0 to 10 V, and 0 to 20 mA
      • Four-channel 12-bit digital-to-analog converter
      • DAC outputs are 0 to 5 V range
  • TEWS Technologies LLC  (5)
    • TAMC900-10
      High speed, high-performance A/D converter AdvancedMC with eight high speed ADCs, preprocessing power by a Virtex-5 FPGA, high speed on board memory for full bandwidth snapshots (+)

      Features:

      38367.jpg
      • Form factor: PCIMG AMC.1 Module, x8 PCI Express port (AMC.1 Type 8 compliant)
      • Virtex-5 LXT FPGA
      • 4 MB QDR-II SRAM
    • TAMC 900
      The TAMC900 is an analog to digital converter AdvancedMC with 8 high speed ADCs providing preprocessing power by a Virtex-5 FPGA and high-speed onboard memory (+)

      Features:

      38072.jpg
      • Single-width / mid-height AMC.1 Type 8 compliant module, x8 PCIe port; IPMI interface
      • Virtex-5 LXT FPGA; 4 MB QDR-II SRAM
      • Analog-to-Digital Converter: 8 x LTC 2254 ADCs, 105 MSps, 14 bit
    • TCP467
      Suitable for high-density I/O in embedded applications (+)

      Features:

      31174.jpg
      • 32 single-ended or 16 differential channels of 16 bit multiplexed analog input, 8 channels of 16 bit analog output, 16 digital I/O lines, and a 32 bit multipurpose counter
      • Manual mode, sequencer mode, or external trigger for ADC/DAC
      • ± 10 V inputs/outputs
    • TAMC900
      High performance analog to digital converter AdvancedMC (+)

      Features:

      • Virtex-5 FPGA and high-speed onboard memory
      • Single-width, mid-height PICMG AMC.1 module; x8 PCI port (AMC.1 Type 8 compliant)
      • Virtex-5 LXT FPGA; 4 MB QDR-II SRAM
    • TIP551
      An IndustryPack compatible module offering 4 channels of isolated 16 bit analog outputs (+)

      Features:

      18122.jpg
      • Interface according to IndustryPack specification
      • Identification-PROM supports auto-configuration
      • Single Size IndustryPack
  • WinSystems, Inc.  (7)
    • PCM-MIO Multifunction A/D
      Analog and digital I/O on a PC/104 module (+)

      Features:

      41298.jpg
      • 16-bit Analog-to-Digital (A/D) converter
      • Conversion sped: 100K samples per second
      • Two quad 12-bit Digital-to-Analog (D/A) converters
    • Command-based DAQ module
      Command-based intelligent data acquisition system (+)

      Features:

      • Onboard processor handles all scheduling, mode selection, calibration control, and data buffer management
      • Eight analog input ranges: 0-1.25 V, 0-2.5 V, 0-5 V, 0-10 V, ±1.25 V, ±2.5 V, ±5 V, and ±10 V
      • 16-bit Analog-to-Digital (A/D) converter
    • PCM-ADIO
      A PC/104 industrial data acquisition module (+)

      Features:

      17783.jpg
      • 32 channel, 16-bit analog-to-digital (A/D) converter
      • 4 channel, 12-bit digital-to-analog (D/A) converter
      • 16 lines of digital I/O and event trigger control
    • Multifunction A/D
      Versatile, PC/104-based analog input, analog output, and digital I/O board designed for industrial applications requiring high-accuracy analog I/O yet requiring no external calibration (+)

      Features:

      33633.jpg
      • Supports optically isolated analog and digital I/O modules for use in harsh industrial environments
      • Two separate 16-bit A/D converters: Each supports 8-channels for a total of 16 single-ended, 8 differential channels or various combinations of both
      • Analog input ranges are: 0-5V, 0-10V, ±5V, and ±10V
    • A/D & D/A Module
      A versatile, PC/104-based analog input, analog output, and digital I/O board (+)

      Features:

      • Multifunction analog and digital I/O module
      • 12-bit or 16-bit A/D converter
      • Eight 12-bit D/A converters
    • PCM-A/D12/16
      16-bit successive approximation analog-to-digital converter capable of operation over a -40°C to +85°C temperature range with no missing codes (+)

      Features:

      1345.jpg
      • Up to 16 single-ended or 8 differential input channels can be selected
      • Supports input of 0V to +5V and ±10V
      • The conversion rate is 30 microseconds/channel
    • PCM-D/A12
      "No tweak" 12-bit digital-to-analog converter module incorporates non-adjusting, laser-trimmed devices and eliminates onboard potentiometers (+)

      Features:

      1135.jpg
      • Provides 8 independent channels with voltage ranges of 0V to +5V, 0V to +10V, and ±10V
      • Available without onboard DC/DC converter [...]
  • ZTEC Instruments, Inc.  (11)
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      9289.jpg
      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZTC400SCU
      Analog input: DC to 150 MHz bandwidth (+)

      Features:

      • Analog signal range: 1V maximum
      • 500 MSamples/sec sample rate
      • 12-bit ADC resolution
    • ZT442 family
      A family of three complete, high performance digital storage oscilloscopes (+)

      Features:

      14829.jpg
      • Two channels simultaneous full-speed
      • 1 GSample/sec single shot
      • Flexible signal processing, range, offset, coupling, impedance, sampling rate, and analog filtering
    • ZT621VXI
      Two channels simultaneous full speed (+)

      Features:

      • 1 Gsample/sec single shot
      • signal processing, range offset, coupling, impedance, sampling rate, and analog filtering
      • 300MHz analog bandwidth
    • Z1428VXI
      A full featured digital storage oscilloscope for both legacy and next generation modular instrumentation systems (+)

      Features:

      16009.jpg
      • 2 channels simultaneous, 8-bit resolution
      • 1 GSps, 250 MHz analog bandwidth
      • 1 MS record length per channel
    • ZT432VXI
      2 channel (PXI) or 4 channels simultaneous (VXI), 12-bit resolution (+)

      Features:

      • 200 MS/s, 90 MHz analog bandwidth
      • Up to 4 MS record length per channel
      • Programmable range, offset, coupling, impedance, sampling rate, and analog filtering
    • ZT442PXI
      2 Channels Simultaneous Acquisition (+)

      Features:

      • 1 GSample/s Single Shot
      • Flexible Range, Offset, Coupling, Impedance, Sampling Rate, & Analog Filtering
      • 300 MHz Analog Bandwidth
    • ZT450PXI-00 -Digital-Storage Oscilloscope
      2 (PCI, PXI) or 4 (VXI) channels (+)

      Features:

      • 8-bit resolution
      • 1 GSps to 2.5 GSps single-channel interleaved sample rates
      • 500 MHz to 1 GHz max analog bandwidth
    • ZT420VXI / ZT422VXI
      8-bit digitizer/digital oscilloscope, ZT420VXI: I channel, ZT422VXI: 2 channel (+)

      Features:

      • + 0.1V to + 5V programmable input signal range
      • 200 MSamples/ sec to 10 MSample/sec programmable sample rate
      • 100 MHz analog bandwidth
    • ZT420PXI
      A single-channel 200 Msample/sec digitizer in a single-wide, 3U PXI/CompactPCI board (+)

      Features:

      • True 8-bit digitizer
      • 100 MHz analog bandwidth
      • 4 Msample memory size
07/3/22 15:10
Close

Subscribe to Analog updates