Analog

Refine Analog companies and products:
analog analogue analog circuit analog ic analogue circuit analogue ic analog to digital digital to analog a/d d/a adc dac continuous signal
Click on any vendor
to see a listing of
Analog related products.
  • Nuvoton Technology  (1)
    • WAU8812
      Mono audio Codec for VoIP-telephone, hands-free telephony markets; provides flexibility in performance and power consumption (+)

      Features:

      38376.jpg
      • Robust, high-fidelity, 24-bit signal architecture
      • 93dB Digital-to-Analog Converter (DAC), Signal to Noise Ratio (SNR), and 91dB Analog-to-Digital Converter (ADC) SNR at audio sampling rates from 8 KHz to 48 KHz
      • Industry-leading 6uA standby current, which greatly reduces power consumption and extends battery life in hand-held applications
  • 4DSP  (1)
    • FMC160
      The FMC160 provides one 12-bit A/D channel at 3.6Gsps and one 14-bit D/A channel at 5.6Gsps (2.8Gsps direct RF synthesis) clocked by either an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. In addition, a trigger input for customized sampling control is available to users. The FMC160 daughter card is mechanically and electrically compliant to the FMC standard (ANSI/VITA 57.1). The FMC160 has a high-pin count connector, front panel I/O, and can be used in a conduction cooled environment. The design is based on Texas Instruments' ADC12D1800 Analog-to-Digital converter and Analog Devices' AD9129 Digital-to-Analog converter. The analog signals are AC coupled connecting to MMCX or SSMC coax connectors on the front panel. The FMC160 allows flexible control on clock source through serial communication busses. Furthermore the card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions in order to reduce system level power consumption. It is well suited for low power applications such as airborne where the highest level of performance is required while ensuring that mission range does not get affected. FEATURES: One ADC12D1800: Single channel 12-bit 3.6Gsps One AD9129: Single channel 14-bit D/A up to 5.6 Gsps (2.8Gsps without 1:2 interpolation) - LVDS VITA 57.1-2010 compliant Conduction Cooled – Standard Option Single ended AC-coupled analog signals 6 MMCX/SSMC connectors available from the front panel 4 LVTTL signals available from an HDMI connector on the front panel 4 Xilinx MGT available from an HDMI connector on the front panel Clock Source, Sampling Frequency through SPI communication busses Flexible clock tree enables: on board VCO: 2200MHz - 4400MHz external reference clock external sampling clock Power-down modes to switch off unused functions for system power savings Mil-I-46058c Conformal Coating Compliant (optional) HPC – High Pin Count Connector LVDS IO signaling [...] (+)

      Features:

  • Curtiss-Wright  (9)
    • VPX3-530 3U VPX Virtex-7 FPGA Digital Receiver
      The VPX3-530 is a rugged dual channel 4GSPS ADC/DAC card with a user programmable Xilinx Virtex-7 FPGA in a 3U VPX ADC/DAC form factor. Providing two 4GSPS 12-bit (or four 2GSPS) analog inputs and two 5.6GSPS update rate (maximum 2.8GSPS data rate) 14-bit analog outputs with XC7V690T FPGA in air and conduction-cooled formats means that the VPX3-530 is ideal for a SWaP constrained range of defense applications such as Radar Warning Receivers (RWR), SIGINT and ECM applications. The VPX3-530 3U VPX Xilinx Virtex-7 FPGA ADC/DAC Card can be used in simple configurations alongside a Single Board Computer (SBC) or as part of a larger array of synchronized high speed analog I/O solutions. The VPX3-530 3U VPX Xilinx Virtex-7 FPGA ADC/DAC Card combines the I/O resources of the ADC, DACs, high-speed DDR3 SDRAM, high-speed PCI Express (PCIe) and serial links together with FPGA driven parallel IO to the OpenVPX backplane. FEATURES: Analog Inputs: 2x 4 GSPS or 4x 2 GSPS at 12-bit Analog Outputs: 2x 5.6GSPS update rate at 14-bit FPGA: Xilinx Virtex-7 VX690T, speed grade 2 Memory: 2x 2 or 4GB banks, 64-bit data per bank of DDR3L SDRAM OpenVPX Profile: MOD3-PAY-1D-16.2.6-2 and MOD3-PER-1F-16.3.2-2 [...] (+)

      Features:

    • FMC-520 DAC
      The FMC-520 DAC dual/quad channel digital-to-analog converter card, that can support up to 4 analog output channels updating at 500 MSPS or 2 analog output channels at 1 GSPS (+)

      Features:

      43574.jpg
      • Dual Texas Instruments DAC5682Z 16-bit digital-to-analog converters
      • Four (4) analog output channels updating at 500 MSPS or two (2) analog output channels updating at 1.0 GSPS
      • Choice of sample clock options: onboard, external direct or external 10 MHz reference
    • Software Defined Radio & EW System
      Curtiss-Wright’s mid-size SDR and EW System enables customers to select their preferred RF tuner and software applications (i.e. GNU Radio, Red Hawk or SCA). By provides up to sixteen analog inputs (12-bit up to 2 Gsps) and eight (14-bit < 2.8 Gsps output channels), the SDR and EW system is easily able to interface L-band or S-band RF frequencies. The SDR/EW is built using rugged COTS products and the system is qualified to MIL-STD-810 and MIL-STD-461 standards. (+)

      Features:

      3745809954057398615.jpg
      • COTS Software Defined Radio and Electronic Warfare System with RF tuner and software selectable by the system integrator
      • Intel Core i7 or Xeon Processor
      • 28VDC Power input per MIL-STD-704
    • RVG-SA1 Analog Video Switch
      The Curtiss-Wright RVG-SA1 SWaP-C-optimized analog video switch implements analog crossbar functionality such that any of the 12 analog video inputs can be routed to any of the 12 outputs. The RVG-SA1 implements a digital crossbar to allow routing of 8 digital inputs to any of 8 digital outputs to support HSYNC and VSYNC connectivity for four PC-style analog video channels. In addition the RVG-SA1 supports four separate EDID interfaces, providing the ability to emulate displays. (+)

      Features:

      363759672405694361.jpg
      • Non-blocking, analog video cross point switch, 12 x 12
      • Up to 4 x RGBHV external video ports
      • 4x EDID ports to support computer inputs
    • PMC-706
      A high-performance, ruggedized, feature-rich graphics PMC (+)

      Features:

      16660.jpg
      • ATI Technologies RADEON Mobility 9000 visual processor unit with: 64 Mbytes integrated high-speed DDR SDRAM, flexible power management capabilities, and hardware OpenGL acceleration
      • Dual independent analog and digital video output: NTSC, PAL, RS-170, and S-Video, non-interlaced analog, LVDS supporting OpenLDI/FlatLink and Barco, DVI/TMDS
      • Analog outputs support separate horizontal and vertical, composite, or sync on red/green/blue
    • PMC-704
      PMC-704 is a PCI Mezzanine Card (PMC) form factor, ruggedized, high-performance, feature rich Graphics PMC designed, developed and supported by Dy 4 Systems (+)

      Features:

      • Mobility 9000 Visual Processor Unit
      • Dual independent video capture capabilities
      • Dual analog capture
    • DCU 4111 Data Concentrator Unit
      Designed to meet the most stringent aerospace requirements, the Curtiss-Wright Model 4111-1 Data Concentrator Unit (DCU) is a microprocessor based controller that receives a diverse assortment of inputs to process and format them into common digital data formats for consumption by various aircraft systems. The DCU design processes many digital communication protocols including EIA/TIA-422, ARINC 429 and Ethernet. (+)

      Features:

      320750269221207198.jpg
      • Rugged construction for military helicopter applications
      • Dual 28Vdc power Inputs normal and backup
      • Interfaces including: analog input, analog output, discrete arinc 429, ethernet, rs-232 [...]
    • PMC-704 Graphics
      PMC-704 - dual I/O graphics PMC (+)

      Features:

      • ATI Technologies RADEON Mobility 9000 Visual Processor
      • Dual independent video capture capabilities
      • Dual independent analog and digital video output
    • Osiris Radar Input
      A high-performance, dual channel radar interface board that accepts and processes analog and digital radar signals (+)

      Features:

      34877.jpg
      • Provides a PCI interface to applications
      • Dual-channel radar interface card
      • PMC or half-length PCI form factors
  • ACCES I/O Products, Inc.  (6)
    • 104-AIO16-16
      Multifunctional high-speed analog-to-digital and digital-to-analog converter card for PC/104 (+)

      Features:

      14717.jpg
      • 16 single-ended/eight differential analog inputs
      • 16-bit resolution, 500 Ksamples/sec conversions
      • Nine input ranges (uni/bipolar)
    • DAQ-PACK System
      The DAQ-PACK offers 32, 64, 96 or 128 channels of single-ended or differential analog inputs, a unique real-time internal autocalibration system for high accuracy, and a wide ran (+)

      Features:

      52471.jpg
      • 32, 64, 96 or 128-channels, single-ended or differential analog inputs
      • High-speed USB 2.0 multifunction DAQ with sustained sampling speeds up to 500kHz
      • 12 or 16-bit resolution
    • 104-AIM-32
      PC/104 analog signal multiplexer for data acquisition (+)

      Features:

      • Card multiplexes and conditions 16 differential or 32 single-ended analog signals before passing them to an analog-to-digital converter card
      • Removable screw terminal block provided for termination of the input signals coming from thermocouples, three-wire RTDs, strain gauges, four 20mA current inputs as well as DC and AC voltage inputs
      • Factory installed bridge completion circuit, current-to-voltage circuit, and current sourcing circuits for the RTDs are optional
    • 104-AIM-32A
      A PC/104 signal-conditioning multiplexer and A/D board (+)

      Features:

      16981.jpg
      • 32 single-ended or 16 differential inputs with flexible gain
      • 12-bit, 8-input, 100-kHz A/D board and cable
      • Software programmable channel by channel input range/gain
    • 104-AIO 12-8
      PC/104 analog I/O board features eight channels, 12-bit resolution on input and four channels, 12-bit resolution on output (+)

      Features:

      • Analog input configuration employs an instrumentation preamplifier per channel (differential inputs), 200V common mode rejection, high input impedance, and optional factory channel-by-channel gain, with preset features, to accommodate low-level inputs from sensors
      • Analog output ranges are field selectable with jumpers
      • Digital I/O lines are pulled up to 5V or pulled down to ground
    • USB-AO Series
      Up to 16 analog outputs with 12 or 16-bit resolution (+)

      Features:

      52225.jpg
      • Unipolar and bipolar output ranges
      • Real-time hardware calibration per channel
      • Update outputs individually or simultaneously
  • General Standards Corporation  (15 of 50)
    • cPCI66-16AISS8AO4
      12-channel, 16-bit PMC analog input/output board with eight simultaneously sampled analog inputs, four analog outputs, and input sampling rates to 2.0 MSPS per channel (+)

      Features:

      • Analog inputs: 8 differential analog inputs with dedicated 16-bit ADC per channel; true simultaneous sampling of all Inputs to 2.0 MSPS per channel
      • Analog outputs: 4 single-ended analog outputs with dedicated 16-Bit DAC per channel; Simultaneous output clocking rates to 1.0 MSPS per channel
      • Selectable Input/Output ranges: ±10V, ±5V, ±2.5V
    • PMC66-16AISS8AO4
      12-Channel, 16-Bit PMC Analog Input/Output Board with eight simultaneously sampled analog Inputs, four analog outputs, and Input Sampling Rates to 2.0 Msps per channel (+)

      Features:

      35127.jpg
      • Analog Inputs: 8 Differential Analog Inputs with Dedicated 16-Bit ADC per Channel; True Simultaneous Sampling of all Inputs to 2.0 Msps per channel
      • Analog Outputs: 4 Single-Ended Analog Outputs with Dedicated 16-Bit DAC per Channel; Simultaneous Output Clocking Rates to 1.0 Msps per Channel
      • Selectable Input/Output Ranges: ±10V, ±5V, ±2.5V
    • cPCI66-14HSAI4
      14-bit, 4-channel, 50 MSPS/Channel PMC analog input board (+)

      Features:

      34788.jpg
      • Four-channel, 14-bit wideband analog input board
      • Sampling rates to 50 MSPS per channel
      • Four wideband analog inputs with a dedicated 14-bit ADC per channel
    • CPCI-12AISS8AO4
      12-channel, 12-bit CompactPCI Analog Input/Output board with eight 2.0 MSPS per Channel Analog Inputs, simultaneous input sampling, wide-range analog inputs; ±100 mV to ±10 V Full-scale (+)

      Features:

      • 8 Differential Analog Inputs with Dedicated 12-Bit, 2.0 MSPS ADC per Channel
      • True Simultaneous Sampling of all Inputs; Minimum data skew
      • Sampling rates to 2.0 MSPS per Channel (16 MSPS Aggregate Rate)
    • CPCI-16DSI-VHS
      A versatile multifunction analog I/O board (+)

      Features:

      • The board has 8 analog inputs and 8 analog outputs per board and supports arbitrary waveform generation
      • A single 16-bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000 sample storage FIFO
      • Up to 250,000 samples per second aggregate output update rates for the 8 D/A channels. Analog outputs are double-buffered and allow for software or hardware (synchronized) strobes for output updating
    • CPCI-ADADIO
      A 12-channel analog I/O board that provides high-resolution 16-bit analog input, analog output, and digital I/O (+)

      Features:

      3520.jpg
      • Eight analog input channels are sampled simultaneously
      • Inputs can be sampled continuously or burst-sampled (up to 200,000 samples/channel for an aggregate rate of 1,600,000 samples/sec)
      • The inputs are converted and stored in a 32,000 sample FIFO buffer
    • PMC-ADADIO
      A 12-channel analog I/O PMC mezzanine (+)

      Features:

      • Provides 16-bit analog input, analog output, and digital I/O
      • Eight analog input channels are sampled simultaneously
      • Inputs can be sampled continuously or burst-sampled (up to 200 Ksamples/channel for an agregate rate of 1.6 Msamples/sec)
    • PMC66-14HSAI4
      14-bit, four-channel, 50 MSps/channel PMC Analog Input Board (+)

      Features:

      34787.jpg
      • Four Wideband Analog Inputs with a Dedicated 14-Bit ADC per channel
      • Sustained Aggregate Rates to 100 MSps
      • Software-Selectable Input Ranges: ±2.5 V, ±1.25 V, ±0.625 V
    • cPCI-16AIO88
      Eight analog output channels with a 16-bit D/A converter per channel (+)

      Features:

      • 16-bit scanning ADC for 8 single-ended or 4 differential analog input channels
      • Input and output ranges available as ±10V, ±5V, or ±2.5V
      • Input and output FIFO buffers, 32 Ks input, 16 Ks output capacity
    • PC104P-VIDEO-AI2
      PC-104-Plus analog video input (+)

      Features:

      • Two video digitizers, FIFOs, and a DMA engine
      • Each video digitizer provides luminance and chrominance signal processing for NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, PAL BGHI, PAL N, PAL M, and SECAM
      • Once the interface has been initialized, it transfers frame-after-frame of video input to host memory without host intervention
    • PC104P-16AIO88
      Versatile multifunction analog I/O board for PC/104-Plus (+)

      Features:

      • Eight analog inputs
      • Eight analog outputs per board
      • Supports arbitrary waveform generation
    • cPCI6U-24DSI32R
      32-channel 24-bit Delta-Sigma CompactPCI 6U Analog Input Board with Rear I/O (+)

      Features:

      • Low noise, 24-bit resolution, low phase distortion and multi-board synchronization make the cPCI6U-24DSI32 board ideal for state-of-the-art sonar and noise monitoring applications
      • 32-channel cPCI6U-24DSI32 analog input board provides a high-density 24-bit analog input resources on a standard 6U cPCI expansion board
      • Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms
    • PMC-16AIO88
      A multifunction analog I/O PMC board (+)

      Features:

      • Board has eight analog inputs and eight analog outputs and supports arbitrary waveform generation
      • A single 16-bit scanning ADC scans eight single-ended or four differential inputs at an aggregate rate of 72,500 samples/sec into the 32,000-sample storage FIFO
      • Up to 250,000 samples/sec aggregate output update rates for the eight D/A channels
    • PMC-12AISS8AO4
      A 12-channel analog I/O PMC board (+)

      Features:

      • Provides eight differential analog outputs with dedicated 12-bit and 2.0 Msamples/sec ADC per channel
      • Four analog output channels 12-bit DAC per channel and 1.0 Msample/sec clocking
      • Provides a 16-bit bi-directional digital I/O port
    • 24DSI16WRC
      The 16-channel 24DSI16WRC analog input module provides high-density 24-bit analog input resources on a standard single-width PMC. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. (+)

      Features:

      292763604861575915.jpg
      • Any PMC board can be used on PCI Express, PCI-X, cPCI-X, PCI, cPCI, PC/104-Plus via an adapter.
      • 16 wide-range differential 24-Bit simultaneously-sampled analog input channels.
      • Input sample rates to 105 Kilosamples per second per channel.
  • WinSystems, Inc.  (6)
    • PCM-MIO Multifunction A/D
      Analog and digital I/O on a PC/104 module (+)

      Features:

      41298.jpg
      • 16-bit Analog-to-Digital (A/D) converter
      • Conversion sped: 100K samples per second
      • Two quad 12-bit Digital-to-Analog (D/A) converters
    • Command-based DAQ module
      Command-based intelligent data acquisition system (+)

      Features:

      • Onboard processor handles all scheduling, mode selection, calibration control, and data buffer management
      • Eight analog input ranges: 0-1.25 V, 0-2.5 V, 0-5 V, 0-10 V, ±1.25 V, ±2.5 V, ±5 V, and ±10 V
      • 16-bit Analog-to-Digital (A/D) converter
    • Multifunction A/D
      Versatile, PC/104-based analog input, analog output, and digital I/O board designed for industrial applications requiring high-accuracy analog I/O yet requiring no external calibration (+)

      Features:

      33633.jpg
      • Supports optically isolated analog and digital I/O modules for use in harsh industrial environments
      • Two separate 16-bit A/D converters: Each supports 8-channels for a total of 16 single-ended, 8 differential channels or various combinations of both
      • Analog input ranges are: 0-5V, 0-10V, ±5V, and ±10V
    • A/D & D/A Module
      A versatile, PC/104-based analog input, analog output, and digital I/O board (+)

      Features:

      • Multifunction analog and digital I/O module
      • 12-bit or 16-bit A/D converter
      • Eight 12-bit D/A converters
    • PCM-A/D12/16
      16-bit successive approximation analog-to-digital converter capable of operation over a -40°C to +85°C temperature range with no missing codes (+)

      Features:

      1345.jpg
      • Up to 16 single-ended or 8 differential input channels can be selected
      • Supports input of 0V to +5V and ±10V
      • The conversion rate is 30 microseconds/channel
    • PCM-AIO
      A 12-bit analog I/O PC/104 board (+)

      Features:

      7010.jpg
      • 8-channel, 12-bit A/D with 0 to +5V or ±2.5V
      • 100 kHz sampling rate
      • SE or DI, unipolar or bipolar
  • Precision Analog Systems (PAS)  (15 of 16)
    • PAS 9816/RO
      A 16-channel, 16- bit VME-based analog output card (+)

      Features:

      • Each of the 16 channels provides a dedicated 16-bit digital-to-analog converter (DAC)
      • Output voltage is +/- 10 V at 5 mA of output current
      • Double buffered DAC input registers allow all DAC outputs to be updated simultaneously
    • PAS 9737/AI
      64 differential analog input channels (+)

      Features:

      • Differential or single ended inputs jumper configurable per channel
      • Optional low pass filters with corner frequencies of 10 Hz, 50 Hz, 100 Hz or 500 Hz
      • Analog inputs on 2 ea. 64 position connectors, allows the use of mass termination cable
    • PAS 9710/AO
      8 Channels of +/- 10 Volt Analog Outputs (+)

      Features:

      • 14 bit resolution, 14 bit linear Digital to Analog Converter (DAC) per channel
      • Output current of +/- 5 mAmps per channel, Output Impedance of 0.1 Ohm
      • Settling time of 2 uSec for full scale voltage step
    • PAS 9416/AO & 9418/AO
      16 analog amplifiers with offset voltage circuits (+)

      Features:

      • Pin compatible with Precision Analog Systems' 9716/AO 16-channel, 16-bit analog output board
      • Using the combination of these two cards, a VMEbus-based analog output system can be constructed that will supply up to ±85V and up to 50 mA of output current per channel [...]
    • PAS 9723/AI
      32 simultaneous sampling analog voltage input channels (+)

      Features:

      • 32 channel scanning analog multiplexer and 12 bit A/D Converter
      • Instrumentation Amplifier per channel with resistor programmable gain
      • Selectable +/- 10.24 V, +/- 5.12 V, 0-10.24 V, or 0 to 5.12V, input voltage ranges
    • PAS 9716/AO
      A 16-channel, 16-bit analog output board (+)

      Features:

      • Each channel has a separate D/A converter and provides a ±10V output range
      • Two D/A channels can be updated with a single 32-bit-wide VMEbus write operation
      • D/A converters reset to zero during powerup
    • PAS 9422/AO
      Sixteen high power amplifier circuits on a 6U format card (+)

      Features:

      • Compatible with the PAS 9716/AO, 16 channel, 16 bit Analog Output card and the PAS 9715/AO, 32 channel, 12 bit Analog Output card
      • Will supply up to +/- 210 Volts and up to 200 mAmps of output current
      • Amplifiers can be configured for either inverting or non-inverting operation, with soldered in jumpers [...]
    • PAS 9915/AO
      VME Analog Output Card (+)

      Features:

      • Provides 32, 12-bit analog voltage output channels on a 6U VMEbus card
      • DAC resolution: 12 bits
      • VME Interface: A32, A24, A16; D32, D16 slave, no interrupts
    • 9716/AO
      Sixteen ±10V analog output channels with a 14-bit linear D/A converter per channel (+)

      Features:

      • Output current of ±5 mA
      • Output impedance 0.1 Ω
      • Output short circuit proof to analog ground
    • PAS 9732/AI
      8 channel, 0 to 10 Volt (9732) or +/- 10 Volt (9732-001), 14 bit Analog Input Card 3 MHz per channel continuous sampling on all channels (+)

      Features:

      • VME 6U form factor; 233 mm x 160 mm card size
      • VME access: D32, D16; A32, A24, A16
      • Right justified sixteen bit integer data. Digital input looks like contiguous memory
    • PAS 9739/AI
      Thirty-nine channel, photodetector and dual gain analog input card (+)

      Features:

      • Dual gain amplifiers provide high and low sensitivity outputs for each photodiode
      • Thirteen synchronously scanning ADC chips
      • High and low sensitivity outputs of each channel are converted simultaneously
    • PAS9715/AO
      A 32-channel, 12-bit resolution D/A converter board (+)

      Features:

      • Each channel has a separate D/A and provides six program-selectable output ranges from ±10V to 0-2.5V
      • Supports full 32-bit VMEbus address space
      • 16-bit and 32-bit data transfers
    • PAS 9722/AI
      Analog input board (+)

      Features:

      • 4 or 8 channels
      • 12-bit resolution
      • Samples at 800 KHz per channel
    • PAS 9731/AI
      8 channel, 14-bit resolution, 2 MHz per channel A/D converter board (+)

      Features:

      • Input voltage range of ±10V
      • 32-bit VMEbus interface allows two channels to be read with one transfer
      • No VMEbus interrupts [...]
    • PAS 9416/AO
      16 Amplified and Offset Channels (+)

      Features:

      • Output Drive of up to +/- 35Volts and +/- 20 mAmps
      • Gain of 1 or 2 Jumper Selectable
      • External Supply Voltage of +/- 15 Volts to +/- 45 Volts
  • Annapolis Micro Systems, Inc.  (1)
    • 2.5 GSps 10-Bit ADC FMC
      The 2.5 GSps 10-Bit ADC FMC provides high fidelity and high speed analog-to-digital conversion along with a rug-ged design. The 2.5 GSps 10-Bit ADC FMC is shipped with a custom heatsink which enables proper cooling of the ADC. An on-board temperature monitor is also supplied which allows for real-time monitoring of the ADC’s internal die temperature. The FMC is mechanically and electrically compliant to FMC standard (ANSI/VITA 57.1). (+)

      Features:

      293453569861406184.jpg
      • 2.5 GHz Max Input Sample Rate
      • 10-Bit A/D conversion with e2v® EV10AS150A or EV10AS150B Analog-to-Digital Converter
      • Analog input configuration option: EV10AS150A – Middle Band; EV10AS150B - Low Band & Middle Band
  • Memec  (1)
    • P160 Communications Module 3 Kit
      Ideal for Xilinx embedded MicroBlaze eystems (+)

      Features:

      19946.jpg
      • Adds Ethernet, Bluetooth, and analog I/O to Popular Memec Spartan-3 LC Board
      • Small, low-cost daughter card form-factor
      • Enables designers to add a standard set of processor peripherals and bulk memory to any P160 compatible system board
  • Nallatech  (6)
    • BenADDA-V4
      Virtex-4, Dual 105 MSps ADC, Dual 160 MSps DAC DIME-II Module (+)

      Features:

      31732.jpg
      • Suited for applications requiring high-speed analog capture and the processing performance of an on-board FPGA
      • Combining an Xilinx Virtex-4 SX or LX FPGA, two analog input channels, two analog output channels, and two banks of DDR-II SRAM, the module provides processing, analog I/O, and memory expansion capability
      • The direct coupling and high density coupling of processing, memory in less space makes design implementation easier [...]
    • BenADC-V4
      Virtex-4/Quad 250 MSps Analog Capture Module (+)

      Features:

      31733.jpg
      • Suitable for applications requiring high-speed analog capture and the on-board FPGA
      • Combining an Xilinx Virtex-4 SX or LX FPGA, four high speed analog capture channels, and two banks of DDR-II SRAM, the module provides processing, analog I/O, and memory expansion capability
      • The high density of processing and analog capture enables systems to be implemented in less space and makes design implementation easier
    • BenADDA: 14-Bit, ADC and
      Onboard Xilinx Virtex-II FPGA (+)

      Features:

      19088.jpg
      • Various FPGA device packages, sizes, and speed-grade options available
      • Two independent analog capture channels
      • 2x 14-bit ADC resolution, up to 105 MSps per channel sampling rate
    • XMC-240
      FPGA processing and analog input PMC/XMC mezzanine (+)

      Features:

      42876.jpg
      • Designed to meet the signal processing needs of modern signal intelligence, software defined radio and radar applications
      • The XMC-240 is the latest product to be introduced to the highly successful Nallatech REVX Series of rugged embedded processing solutions
      • The XMC-240 features four channels of analog input that can sample analog signals at up to 250 MSPS with 14 bits resolution
    • XMC-220
      FPGA and 16-bit Analog I/O PMC/XMC (+)

      Features:

      • Single-width PMC/XMC mezzanine
      • Xilinx Virtex-5 LX155T or SX95T FPGA
      • Two 16-bit 180 MSps A/D converters
    • xmc-240
      The XMC-240 features four channels of analog input that can sample analog signals at up to 250 MSPS with 14 bit resolution (+)

      Features:

      • These are coupled directly to a Xilinx Virtex-5 SX95T FPGA for the implementation of high-performance DSP applications to process the data captured from the A/D converters
      • The XMC-240 has comprehensive clock management capabilities and offers either on-board clocking or external clock input
      • Supported by comprehensive Development Kits for both Linux and Wind River Vx Works
  • Aitech Defense Systems  (4)
    • M453
      An analog I/O PMC module (+)

      Features:

      15665.jpg
      • 50 analog input channels
      • 16-bit A/D conversions at 100 Ksamples/sec
      • 12 differential or 24 single-ended analog input channels with ±10V input range
    • S930 I/O Card
      Rad-tolerant 3U, CompactPCI analog I/O card that increase real-time communication and I/O functions between control subsystems and external subsystems (+)

      Features:

      33260.jpg
      • Designed for LEO, Mars Terrestrial with an Option for GEO Environments
      • Single-Slot Conduction-Cooled 3U CompactPCI card
      • 12-bit A/D converter with -10 V to +10 V input range
    • M585 Multi-standard Graphics/Video PMC
      High-performance 2D and 3D graphics combined with extensive video I/O capabilities (Permedia3 graphics processor) (+)

      Features:

      • 32 MB SDRAM frame buffer memory
      • RGB/RGsB analog output support resolution up to 1600x1200; analog video inputs supporting composite, S-video and RGB/RGsB; composite video/S-video outputs supporting NTSC or PAL (according to configuration)
      • Flat panel interface supporting up to UXGA, DVI compliant
    • M580
      A PMC graphics adapter (+)

      Features:

      15667.jpg
      • Based on Permedia3 graphics processor
      • 32 Mbytes of SDRAM frame-buffer memory
      • RGB analog output with DDC1 and DDCAB+
  • Analog Devices, Inc.  (11)
    • ADuC702x
      A single-chip, precision analog microcontroller solution that integrates a 12-bit analog front end with a 32-bit RISC processing core for industrial, optical networking, and automotive applications (+)

      Features:

      • Integrates an ARM7TDMI core with a Flash-based 16/32-bit RISC MCU with processing capabilities up to 45 MIPS peak performance
      • Analog peripherals include up to 16 channels of fast, 12-bit accurate analog-to-digital conversion, up to four individual 12-bit monotonic digital-to-analog converters, and a precision bandgap reference
      • Other peripherals include a comparator, programmable logic array (PLA), and a three-phase PWM generator
    • AD9736
      A 14-bit digital-to-analog converter (DAC) that clocks at a sample rate of 1.2 GSps (+)

      Features:

      • Operates from 1.8V and 3.3V supplies, consuming 380mW at 1.2 GSps with the interpolation filter bypassed and 550mW with the interpolation filter enabled
      • Provides a fast LVDS input interface using a DDR mode
      • Output currents are programmable over a range of 10mA to 30mA and can be configured for various single-ended or differential circuit topologies
    • AD7686
      A 16-bit Successive-Approximation Register (SAR), analog-to-digital converter (+)

      Features:

      • Housed in a 5mm x 3mm MSOP (micro-SOIC) package
      • Operates at 550 Ksamples/sec while providing ±3 LSB linearity
      • Typical power dissipation of 20mW with a 2.7V supply
    • AD77990/91 and AD7788/89
      A low-power, 24-bit, sigma-delta analog-to-digital converter (+)

      Features:

      • Consumes only 25µA
      • Available in a MCOP-10 package
      • On-chip buffer and internal clock generator
    • AD5641
      A digital-to-analog converter (DAC) (+)

      Features:

      • Part of the nanoDAC family; small package and low power consumption
      • SC-70 package
      • 14-bit resolution
    • AD5379
      A 40-channel, 14-bit, voltage-output, digital-to-analog converter (DAC) (+)

      Features:

      • 40 DAC channels and 40 output amplifiers (with gain) in a 108-ball, CSPBGA package
      • All DACs are monotonic to 14 bits and accurate to 12 bits
      • Maximum output voltage span of the DACs is 17.5V
    • AD9956
      A low-power, monolithic radio frequency (RF) synthesizer that integrates both direct digital synthesis (DDS) and phased locked loop (PLL) circuitry (+)

      Features:

      • Part of the AgileRF family of synthesizers
      • Operates in the ISM band of frequencies
      • 650-MHz, PECL-compliant CML clock driver with programmable slew rates
    • AD5380/AD5382
      A family of high-density digital-to-analog converters (DACs) (+)

      Features:

      • 40-channel (AD5380) or 32-channel (AD5382) 14-bit, voltage-output DAC operates from a single 5V power supply
      • On-chip, low-drift reference
      • User-programmable offset and gain for digital range adjustment and system calibration
    • AD534x Family
      A family of low-voltage, octal, digital-to-analog converters (+)

      Features:

      • Each device integrates eight low-power, parallel-interface DACs
      • Available in 6mm x 6mm chip-scale packages (CSP)
      • Available in 8-bit (AD5346), 10-bit (AD5347), and 12-bit (AD5348) versions
    • ADSP EZ-ICE
      In-circuit emulator for Analog Devices ADSP-2171 DSP (+)

      Features:

      • Contains GUI for easier debugging control
      • Plugs directly into processor socket on target board
      • Stand alone operation for software debugging
    • Summit-ICE
      A PCI-based emulator for Analog Device's JTAG DSPs (+)

      Features:

      • A shielded 3V/5V JTAG pod and cable provides a non-intrusive interface
      • Plug and play installation
      • System requirements include a Pentium 166 MHz or greater, a minimum of 32 Mbytes of PC-AT memory, and one 32-bit PCI slot
  • Agilent Technologies  (2)
    • E1430A
      2 pass, or subranging, 10 Msamples/sec ADC with 23 bits of resolution (+)

      Features:

      • A single-slot, single channel, C-size, VXI card that is a complete A/D module
      • Included in the module with the low distortion, low noise analog to digital converter, is flexible input signal conditioning, tunable digital filtering, an 8-Mbyte memory, and a high-speed local bus
      • Input signal conditioning includes 11 attenuation/gain ranges, AC/DC coupling and an analog anti-alias filter
    • N8211A
      20/40 GHz performance analog upconverter generates a stimulus signal with superior AM, FM and pulse modulation capabilities (external or internal modulation) (+)

      Features:

      • Based on the PSG analog signal generator's high output power, low phase noise and excellent level accuracy [...]
  • National Semiconductor  (2)
    • ADC12040
      A monolithic CMOS analog-to-digital converter (+)

      Features:

      • Converts analog input signals into 12-bit digital words at a minimum of 40 MSPS
      • Uses a differential, pipelined architecture with digital error correction and an on-chip sample-and-hold circuit to minimize die size and power consumption
      • Operates on a single 5V power supply
    • LM96511
      Eight-channel transmit/receive system (+)

      Features:

      46222.jpg
      • Four ICs including an Analog Front End (AFE), transmit/receive switch, transmit pulser, and transmit beamformer
      • National claims this AFE has the highest-resolution digital variable gain amp available, with better channel-to-channel matching and higher spectral performance than analog-only solutions
      • An evaluation kit for the transmit/receive system includes WaveVision 5 software [...]
  • CAEN Technologies,Inc.  (1)
    • V1742
      The Mod. V1742 is a VME board housing two sections of 16+1Channels 12bit 5GS/s Switched Capacitor Digitizer, with 1 Vpp input dynamic range on single ended MCX coaxial connectors. The DC offset adjustment (range ± 1V) on each channel by 16bit DAC allows a right sampling of a bipolar (Vin=± 0.5V) up to a full positive (Vin= 0 · +1V) or negative (Vin= 0 · -1V) analog input swing without losing dynamic resolution. The analog input signals are continuously sampled into the DRS4s (resolution up to 200ps) in a circular analog memory buffer (1024 cells). As a trigger signal arrives, all analog memory buffers are frozen and subsequently digitized with a resolution of 12bit into a digital memory buffer. The digital memory (128 events deep for each channel, where 1 event = 1024x12bit) allows to store following events, even if the readout is not yet started. Moreover, since the digital memory buffers work like FIFOs, the readout activity from VME or Optical Link doesn’t affect write operations of successive events. (+)

      Features:

      184331390941381821.jpg
      • A common board trigger can be provided via VME or Optical Link, or by TRGIN input.
      • 32+2 Channel in a 6U VME module
      • 12 bit; Selectable 5, 2.5, 1 GS/s Switched Capacitor ADC
  • TEWS Technologies LLC  (7)
    • TAMC900-10
      High speed, high-performance A/D converter AdvancedMC with eight high speed ADCs, preprocessing power by a Virtex-5 FPGA, high speed on board memory for full bandwidth snapshots (+)

      Features:

      38367.jpg
      • Form factor: PCIMG AMC.1 Module, x8 PCI Express port (AMC.1 Type 8 compliant)
      • Virtex-5 LXT FPGA
      • 4 MB QDR-II SRAM
    • TAMC 900
      The TAMC900 is an analog to digital converter AdvancedMC with 8 high speed ADCs providing preprocessing power by a Virtex-5 FPGA and high-speed onboard memory (+)

      Features:

      38072.jpg
      • Single-width / mid-height AMC.1 Type 8 compliant module, x8 PCIe port; IPMI interface
      • Virtex-5 LXT FPGA; 4 MB QDR-II SRAM
      • Analog-to-Digital Converter: 8 x LTC 2254 ADCs, 105 MSps, 14 bit
    • TCP467
      Suitable for high-density I/O in embedded applications (+)

      Features:

      31174.jpg
      • 32 single-ended or 16 differential channels of 16 bit multiplexed analog input, 8 channels of 16 bit analog output, 16 digital I/O lines, and a 32 bit multipurpose counter
      • Manual mode, sequencer mode, or external trigger for ADC/DAC
      • ± 10 V inputs/outputs
    • TAMC900
      High performance analog to digital converter AdvancedMC (+)

      Features:

      • Virtex-5 FPGA and high-speed onboard memory
      • Single-width, mid-height PICMG AMC.1 module; x8 PCI port (AMC.1 Type 8 compliant)
      • Virtex-5 LXT FPGA; 4 MB QDR-II SRAM
    • TIP551
      An IndustryPack compatible module offering 4 channels of isolated 16 bit analog outputs (+)

      Features:

      18122.jpg
      • Interface according to IndustryPack specification
      • Identification-PROM supports auto-configuration
      • Single Size IndustryPack
    • TPMC551
      A standard single-width 32-bit PMC module conforming to IEEE P1386.1 (+)

      Features:

      10967.jpg
      • PCI 2.1 compliant interface
      • Board size: 149mm x 74mm
      • Eight or 4 channels of isolated 16-bit analog outputs
    • TPMC550
      A standard single-width 32 bit PMC module conforming to IEEE P1386.1 (+)

      Features:

      17833.jpg
      • PCI 2.1 compliant interface
      • Board size: 149mm x 74mm
      • Eight or four channels of isolated 12 bit analog outputs
  • GE Intelligent Platforms, Inc.  (15 of 21)
    • VMIVME-4116
      An 8-channel, 16-bit resolution analog output board (+)

      Features:

      • Fast settling: 10µs maximum to ±0.003 percent of FSR
      • Buffered voltage output (±10V at 5mA)
      • Multiplexed programmable outputs on P2 connector for testing analog outputs
    • ICS-1556
      4-channel, 400 MHz 14-bit ADC PMC module with Virtex-5 SX95T user programmable FPGA (+)

      Features:

      • 4 transformer-coupled analog inputs
      • Analog-to-digital resolution 14-bits
      • Fs≤ 400 MHz per channel
    • VMIVME-4514A
      A scanning analog I/O board (+)

      Features:

      • 16 analog input channels
      • Continually digitizes all input channels and stores the results in a dedicated channel dual-port register (autoscanning mode)
      • Three A/D operating modes: autoscanning; random polling, and scanning poll
    • ICS-8145
      Rugged high-speed Acoustic VME Bus ADC board (+)

      Features:

      33572.jpg
      • 16 ADC channels (Analog Devices AD9260): 16-bits @ 2.5 MSPS
      • Rear I/O features differential analog inputs and FPDP II output bus
      • Onboard signal conditioning provides programmable gain, filtering
    • ICS-150B
      4-Channel, 40 MHz, 12-bit, VMEbus Analog Input and output board (+)

      Features:

      33591.jpg
      • 4 separate 12-bit ADCs and DACs
      • The ADCs and DACs can operate at rates of up to 40 MHz/ch. for 2 channels, or 20 MHz/ch. for 4 channels
      • Continuous or burst modes of operation
    • VMIVME-4512
      An analog I/O board (+)

      Features:

      • 16 analog input channels
      • Onboard 12-bit A/D converter
      • 16 differential or 16 single-ended channels
    • VMIVME-4105
      An 8-channel, 12-bit multiplying digital-to-analog converter board (+)

      Features:

      • Jumper-selectable P2 or front-panel outputs
      • 2- or 4-quadrant multiplier jumper-selectable option
      • Jumper option to support 8 independent or 1 shared AC or DC voltage reference
    • VMIVME-3125
      A 6U isolated scanning analog-to-digital converter board (+)

      Features:

      • 12-bits, 32-channels
      • Autoscanning; continuously digitizes inputs and stores results in dual-ported data registers
      • Input ranges from ±50mV to ±10V or 0 to 25mA
    • VMIVME-4132
      An analog output board (+)

      Features:

      • 32 analog output channels
      • 12-bit D/A converter
      • One S&H for output
    • daqNet
      Acoustic Data Conversion System (+)

      Features:

      33566.jpg
      • Fully integrated acoustic server in a compact rackmount 1U chassis
      • Up to 192 channels of acoustic I/O or 240 channels of digital I/O
      • Dual Gigabit Ethernet interfaces for data I/O and control
    • VMIVME-3413
      32 differential or single-ended low-level analog input channels (+)

      Features:

      • Buffered high-level analog outputs
      • Isolation from VMEbus; 500 VDC
      • Analog current loop inputs (optional)
    • DataXpress Version 1.2
      Latest version of SBS' data acquisition software for the WindowsNT operating environment (+)

      Features:

      • Additional I/O cards supported via "add-on kits" which include various SBS Telemetry and Communications Products' demodulators, bit synchronizers, digital-to-analog converters, receivers, and downconverters
      • New hardware support includes the SBS Avionics Products' ARINC-429 for the SBS ISA and PCI 8/16 channel cards, as well as SBS PASS cards
      • Added support for a group of commercial analog data acquisition cards from National Instruments [...]
    • CAD16
      A 3U, intelligent 16 channel analog I/O board (+)

      Features:

      • Two 16-bit A/D converters
      • Programmable gain
      • Onboard TMS320C31 DSP [...]
    • ADEPT60 Video Tracker
      High performance, multiple interface, single board video tracker (+)

      Features:

      • Operational with a number of customers in a range of applications
      • High clutter rejection using Statistical Target Enhancement Pre-processors
      • Complex, multiple algorithm capability for detection and tracking
    • VMIVME-4140
      An analog output board (+)

      Features:

      • 32 analog output channels
      • 10mA maximum output current per channel
      • One 12-bit D/A converter per output channel
  • Technologic Systems  (2)
    • AtoD/DAC Board (TS-9700)
      Eight-channel 12-bit analog-to-digital converter with 0.2% analog reference (+)

      Features:

      • AtoD input 0 to 2.5 V, 0 to 10 V, and 0 to 20 mA
      • Four-channel 12-bit digital-to-analog converter
      • DAC outputs are 0 to 5 V range
    • TS-ENC730
      TS-ENC730 Metal Enclosure for TS-7300 SBC with power converter and optional CAN interface (+)

      Features:

      31794.jpg
      • Supports TS-7300 SBC
      • 8-28 VDC power input
      • Surge suppression on power input
  • Electromate  (1)
    • RIO Pocket PLC
      Galil's Pocket PLC is smart, compact, low-cost, and packed with I/O — 32 digital and 16 analog I/O in a 3.9 x 4.3 x 1.3 in. package (+)

      Features:

      46878.jpg
      • Intelligent, Remote Ethernet I/O Controller
      • (1) 10/100 Base-T Ethernet port(1) RS232 port up to 115/19.2 kbaud
      • 8 analog inputs with 12-bit ADC (16-bit option), +/-10V, +/-5V, 0-5V, 010V
  • Technobox, Inc.  (1)
    • 2677
      A 2-channel, 12-bit, 10 Msamples/sec, A/D converter with antialiasing filter (+)

      Features:

      • Single-wide PMC card form factor
      • Two bipolar, single-ended analog inputs are passed through analog filters to provide initial band limiting
      • Signals are sampled at 20 Msamples/sec and the digital output of each A/D converter is passed through a decimation by 2 function which effectively reduces the sample rate to 10 Msamples/sec
  • SSV Software Systems GmbH  (3)
    • AIO104-20
      A PC/104-based analog I/O board (+)

      Features:

      • 2-channel
      • 12-bit DAC
      • 0V to 10V
    • AIO104-10
      A PC/104-based analog I/O board (+)

      Features:

      • 16-channel
      • 12-bit ADC
      • 0V to 10V
    • AIO104-30
      A PC/104-based analog I/O board (+)

      Features:

      • 16 channels of 12-bit ADC
      • Two channels of 12-bit DAC
      • Eight digital inputs
  • Dallas Logic Corporation  (1)
    • FMC-ADC01
      A four-channel analog signal capture board based on Texas Instrument's ADS64xx family of analog-to-digital converters (ADCs) (+)

      Features:

      • Supports both 12- and 14-bit devices with sample rates ranging from 65 MSps to 125 MSps
      • Seven front bezel MMCX connectors and a low pin count (LPC) FMC connector provide the module's off-board connectivity
      • In addition to the four A/D inputs, the module has an external clock input, synchronization input, and synchronization output
  • Signatec, Inc.  (2)
    • SIG-PRG
      Portable high-speed data acquisition and waveform generation systems: 2 analog A/D channels at up to 160 MHz sampling rate, 2 analog I&Q D/A channels, bandwidth 100 KHz to 600 MHz (+)

      Features:

      42051.jpg
      • Two analog signal recording channels at up to 160 MHz sampling rate
      • Two analog I&Q waveform generation channels at up to 1 GHz sampling rate
      • 16-bit resolution for both the A/D and D/A channels
    • PX1500-2
      The PX1500-2 is a 2-channel high-speed digitize that can acquire up to 1.5 giga-samples per second (GSPS) on each channel or up to 3 GSPS for single channel operation (+)

      Features:

      46569.jpg
      • 2 Analog Channels at up to 1.5 GHz Sample Rate per Channel
      • 1 Analog Channel at up to 3.0 GHz Sample Rate in Interleaved Mode
      • Bandwidth Up to 2 GHz
  • EWA, Inc.  (1)
    • ADX 1480-4
      The ADX1480-4 offers four high speed analog-to-digital converter (ADC) channels on a single 6U VME Module. Each channel includes a 14-bit ADC with sampling rates to 80 MHz. (+)

      Features:

      • 4 Channels
      • Single-slot, 6U VME
      • 80 MHz, 14-bit sampling
  • Diamond Systems Corporation  (14)
    • DS-MPE-DAQ0804
      The DS-MPE-DAQ0804 offers 8 16-bit analog input channels, 4 16-bit analog output channels, and 21 configurable digital I/O lines in a PCIe MiniCard form factor with an extended operating temperature of -40oC to +85oC. The analog inputs offer single-ended and true differential capability, 4 programmable input ranges, and 100 KHz aggregate sample rate. Outstanding features of the DS-MPE-DAQ0804 analog input circuitry include an integrated programmable timer to control A/D sample rates automatically, resulting in precise timing plus significantly reduced processor overhead compared to software polling techniques. The 2048-sample data FIFO with programmable interrupt threshold further reduces processor overhead by reducing the interrupt rate required to transfer data from the board to the application. With these features DS-MPE-DAQ0804 can offer accurate, full-speed performance in any single-board computer regardless of processor speed. The 16-bit analog outputs offer 2 programmable output voltage ranges. An integrated precision, low-drift voltage reference ensures a lifetime of accurate performance across the full operating temperature range. A built-in waveform generator with 2K sample buffer enables the board to be used in stimulus applications such as sonar, laser light control, and other applications. The 21 buffered digital I/O lines feature programmable direction in groups of 4, 6, and 8 bits. The digital I/O lines can also be configured as either 24-bit pulse width modulators or 32-bit counter/timers, driven by the on-board 50 MHz clock. FEATURES: 8 single ended or 4 differential 16-bit analog inputs Maximum aggregate sample rate of 100 KHz Analog input ranges of +/-10V, +/-5V, 0-10V, 0-5V 4 16-bit analog outputs Analog output ranges of 0-5V and 0-2.5V 21 buffered digital I/O lines, individual direction control & protection Digital I/O lines optionally configurable as: o 4 24-bit pulse width modulators or o 8 32-bit programmable counter/timers Utilizes PCIe link on Minicard socket Support for Windows Embedded Standard 7, XP, CE and Linux 2.6.xx Diamond’s Universal Driver software supports all functions Rugged design: -40oC to +85oC operating temperature PCIe MiniCard form-factor: (2 x 1.18 in. / 50.95 x 30mm) [...] (+)

      Features:

    • Helix PC/104 SBC
      Diamond's family of Helix PC/104 SBCs combines mid-range CPU performance, standard PC I/O, and on-board data acquisition circuitry at a competitive price. Available PC I/O includes 3 or 6 USB 2.0 (model dependent), 4 serial ports (2 RS-232/422/485 and 2 RS-232), 1 10/100Mbps Ethernet, 1 Gigabit Ethernet port, and a SATA port. The data acquisition circuit includes 20 16-bit analog inputs, 4 16-bit analog outputs and 27 digital I/O lines configurable as counter/timers and pulse width modulators. (+)

      Features:

      338732900641856664.jpg
      • Vortex86DX3 SoC dual core CPU running at 1GHz
      • Up to 2GB of DDR3 SDRAM soldered on board
      • 3 or 6 USB 2.0 ports (model dependent)
    • Diamond-MM-48-AT
      A PC/104, autocalibrating analog I/O board (+)

      Features:

      15962.jpg
      • 16 analog inputs, 16-bit A/D
      • 200 KHz maximum sampling rate
      • 2-Kbyte A/D sample FIFO
    • Diamond-MM
      A 12-bit, 16-channel analog I/O PC/104 board (+)

      Features:

      • 16 single-ended or 8 differential analog inputs
      • 12-bit A/D resolution
      • Multiple bipolar and unipolar input range
    • Ruby-MM
      A 12-bit analog output PC/104 module (+)

      Features:

      • Four or eight analog outputs
      • 12-bit D/A resolution
      • Multiple bipolar and unipolar output ranges: ±10V, ±5V, ±2,5V, 0-10V, 0-5V, 0-2.5V
    • Ruby-MM-1616AP-XT
      The Ruby-MM-1616A family provides up to 16 channels of 16-bit resolution analog outputs with either voltage and/or current outputs. The modules also provide 48 lines of digital I/O, a waveform generator, 4 pulse width modulators, 2 counter/timers, and HART signal handling capability on four channels. This new family of analog output modules provides the highest accuracy analog outputs, making them ideal for embedded and OEM applications needing analog output with digital I/O. (+)

      Features:

      238154878641804264.jpg
      • 4, 8, or 16 16-bit analog outputs
      • Independent voltage and/or current outputs
      • 48 digital I/O lines
    • Diamond-MM-32-AT
      Data acquisition module with auto-calibration (+)

      Features:

      1363.jpg
      • Contains EEPROM with target calibration measurements and correction factors and octal 8-bit D/A converter
      • 32 analog input channels allow input configuration to be set at 32 single-ended, 16 single-ended and 8 differential or 16 differential
      • Input ranges from ±10V to ±0.625V in bipolar mode and 0-10V to 0-0.625V in unipolar mode
    • Diamond-MM-16-AT
      16-channel 16-bit A/D, 4-channel 12-bit D/A, 16 digital I/O, two counter/timers (+)

      Features:

      7363.jpg
      • Autocalibration provides maximum accuracy at all times regardless of time or temperature
      • Available with four optional analog output channels
      • Free Universal Driver software for Linux, Windows 98/2000/XP/XPe/CE .NET, DOS, QNX, and VxWorks
    • DMM-32X-AT
      32-channel, 16-bit A/D, 4-channel, 12-bit D/A, 24 digital I/O, two counter/timers (+)

      Features:

      • Automatic Autocalibration (patented) provides maximum accuracy at all times regardless of time or temperature
      • RS-232/485 serial port and microcontroller enable standalone operation without a CPU for low-cost applications
      • 100 percent backward compatible with industry-leading DMM-32-AT analog I/O board
    • Diamond-MM-32X-AT
      32-channel, 16-bit A/D, 4-channel 12-bit D/A, 24 digital I/O, 2 counter/timers (+)

      Features:

      20577.jpg
      • Automatic Autocalibration provides maximum accuracy at all times regardless of time or temperature
      • RS-232/485 serial port and microcontroller enable standalone operation without a CPU for low-cost applications
      • 100 percent backward compatible with industry-leading DMM-32-AT analog I/O board
    • Ruby-MM-1612
      High-density analog output module provides sixteen 12-bit resolution analog voltage outputs with 4 quad D/A converter ICs (+)

      Features:

      • Allows output resolutions as low as 0.6mV (0-2.5V output range)
      • Each output can drive or sink up to 5mA
      • Offers multiple output ranges, 16 digital I/O lines, +5V and extended temperature operation [...]
    • Diamond MM Family
      16-or 32 12-bit or 16-bit analog inputs, 2- or 4 12-bit analog outputs, with programmable input ranges (+)

      Features:

      • 100 KHz or 250 KHz sample rate with up to 1K sample FIFO
      • 16 or 24 digital I/O lines
      • Available with autocalibration for high accuracy across the entire operating temperature range
    • Ruby-MM-416
      16-bit, 4-channel analog output module features 4 analog voltage outputs with 1-bit resolution and 24 digital I/O lines for general purpose device interface (+)

      Features:

      • +5V only operation [...]
    • Helios
      A ruggedized, compact, low-power, and low-cost PC/104 SBC (+)

      Features:

      41250.jpg
      • Utilizes the DMP Vortex86SX/DX single-chip processor operating at up to 800 MHz
      • Up to 256 MB of DRAM soldered onboard
      • Offers standard PC peripheral features, including four USB 2.0 ports, one 10/100BASE-T Ethernet interface, four RS-232 ports (two with RS-232/422/485 capability), an IDE interface, and VGA/LCD graphics
  • Alphi Technology Corporation  (8)
    • PCIe-Mini-AD8200
      The PCIe-Mini-AD8200 with 1X Lane PCI Express Mini card and a simultaneously sampled A/D, offers a mix of up to 8 single-ended or 4 differential analog input channels. All channels feature programmable gain 1 or 2 and can be programmed to handle analog input with a single-ended or differential configuration. The 16-bit A/D converters can provide a global acquisition and conversion time of â‰?5Î?sec per sample per channel. The board offers a programmable digital filter with ±5 V range and the −3 dB frequency is typically 15 kHz. In the ±10 V range the −3 dB frequency is typically 23 kHz. Alphi Technology offers a variety of PCI Express Mini cards: PCIe-Mini-DA16, PCIe-Mini-1553, PCIe-Mini-ARINC429, PCIe-Mini-CAN, PCIe-Mini-DIO and more. FEATURES: 8 channels 16-bit A/D converter simultaneously sampled Fast throughput rate: 200 KSps for all 8 channels 8 channels SE or 4 pseudo differentials Single-ended or 4 differential channels True bipolar analog input ranges: ±10 V, ±5 V – selection applies to all channels Analog input clamp protection 1MΩ analog input impedance Programmable 2nd order anti-alias analog filter Over-sampling capability with digital filter PCI Express compliant [...] (+)

      Features:

    • PXI-ADDA
      A 16-bit analog-to-digital/digital-to-analog converter (+)

      Features:

      • Quad channel
      • 16 digital I/O
      • TMS320C31 DSP processor
    • CPCI-DA16
      A CompactPCI module 16-channel, 16-bit digital to analog board (+)

      Features:

      • 10 uS DAC converters
      • Two banks of 256 Kbyte SRAM for wave form tables
      • Selectable internal and external power options
    • PXI-DA16
      A 16-channel, 16-bit digital-to-analog converter (+)

      Features:

      • 3U CompactPCI form factor
      • 10 uS DAC converters
      • High-speed transfers to and from the CompactPCI bus
    • CPCI-DSC4
      A 4-channel A/D and D/A converter with 16 digital I/O channels (+)

      Features:

      • TMS320C31 DSP control processor
      • 512 Kbytes of zero-wait-state SRAM
      • External or internal scan clock
    • CPCI-DA-16
      3U slave digital-to-analog board managed by the host processor on the CompactPCI bus (+)

      Features:

      • Contains a state machine that performs most data output to minimize impact on the host system
      • 16 independent channels
      • 16-bit D/A converters
    • CPCI-MFIO-6U
      An intelligent 6U multi-function I/O (+)

      Features:

      • PMC mezzanine site
      • 32 single-ended channels or 16 differential channels
      • 16-bit A/D
    • PXI-AD16
      A 3U data acquisition module (+)

      Features:

      • Sixteen 16-bit channels
      • TMS320C31 DSP processor
      • 512 Kbyte of zero-wait-state SRAM
  • Advantech Corporation  (12)
    • PCI-1744e
      \High-Speed Analog Input Card with PCI Express Interface (+)

      Features:

      • PCIe-1744 4-channel, 12-bit, ultra high-speed analog data acquisition card with PCI express interface
      • The PCIe-1744 is capable of handling analog-to-digital sampling simultaneously and independently on all four channels
      • The PCIe-1744 features multiple trigger modes for convenient application scenarios and a 30MHz sampling rate is achieved with independent A/D converters for each of the four analog input channels
    • MIC-3723
      16-bit, 8-channel non-isolated analog output card (+)

      Features:

      • 3U CompactPCI 16-bit 8-channel non-isolated analog output card
      • Each analog output channel is equipped with a 16-bit double-buffered DAC and features an auto-calibration function and BoardID switch
      • The MIC-3723 is a plug & play device that fully complies with the PCI specification Rev 2.2
    • USB-4716
      A 200 KSps 16-bit multifunction USB 2.0 I/O module (+)

      Features:

      32994.jpg
      • Designed for industrial environments
      • Includes a USB connector with screw fasteners and a DIN-rail mounting kit
      • Draws power directly from the USB port and therefore does not require an external power supply
    • MIC-3714
      3 FPM 2 TPC 12-bit A/D converter up to 30 MSps (+)

      Features:

      • 4 single-ended analog input channels
      • Programmable gain for each input channel
      • 32 K samples on board FIFO memory per channel
    • ADAM-4117
      The ADAM-4117 is an 8-channel analog input module starting at $375. (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the ADAM-4117, a data acquisition module designed for reliable operation in harsh environments. Its built-in microprocessor, encased in rugged industrial-grade ABS plastic, provides intelligent signal conditioning, analog I/O, digital I/O, LED data display, and an address mode with a user-friendly design.
      • Other ADAM-4117 features include: 8 differential and independently configurable channels, high noise immunity, broad power input range (+10~48VDC), LED display, and on-line firmware update. It supports both unipolar and bipolar inputs and has 1 kV surge protection on the power input, 3 kV ETF, and 8 kV ESD protection. It supports the popular Modbus/RTU protocol as well a simple ASCII based protocol.
      • The ADAM-4117 starts at $375 and is available for purchase directly from Advantech at 1-800-205-7940 or from one of Advantech's North American distributors at www.eautomationpro.com/us. [...]
    • PCM-3813I
      Advantech Launches Isolated Analog Input PCI-104 Card (+)

      Features:

      42559.jpg
      • The Industrial Automation Group of Advantech introduces the PCM-3813I PCI-104 module with 100 kS/s, 12-bit 32-channel isolated analog input
      • The PCM-3813I offers 2,500 VDC isolation protection and software programmable gain on each analog input channel protecting computers and connected peripherals from high voltage damage on the input lines
      • Moreover, the PCM-3813I breaks the traditional limitations of analog input data transmission by providing significantly faster speeds than similar modules on the market
    • PEC-3710
      Integrated I/O controller (+)

      Features:

      52367.jpg
      • AMD LX800 500 MHz controller
      • 16-channel analog input
      • 4-channel analog output
    • PCI-1727U
      The eAutomation Group of Advantech introduces the PCI-1727U analog output PCI card featuring 12 analog output channels with DB-37 connector. The PCI-1727U is capable of outputting +/- 10V and 0~20mA current loops with 14-bit resolution. It's equipped with 16 TTL DI and 16 TTL DO channels that are suitable for industrial control applications and a universal PCI bus compatible with both 3.3V and 5V signaling. (+)

      Features:

      • The PCI-1727U is compatible with Advantech's popular ISA card functions, connectors, and Windows DLL drivers allowing you to upgrade from ISA to PCI effortlessly. The ISA-compatible card uses the same software API as ISA cards, there is no need to rewrite programming when upgrading. The PCI-1727U features synchronized analog output function allowing multiple devices to be driven simultaneously without any synchronization lags.
      • The PCI-1727U starts at $795 and is available for purchase directly from Advantech at 1-800-205-7940. [...]
    • PCI-1742U
      One MSps, 16-bit, 16-channel multifunction DAQ card (+)

      Features:

      32973.jpg
      • High-resolution multifunction DAQ card with fast sampling rate for PCI bus
      • 16x single-ended or 8x differential analog input channels, 1.0 MSps single channel sampling rate (800 KSps multi-channel), 2 x 16-bit D/A output channels, 16 x digital input/output channels, and 1 x 10 MHz 16-bit counter channel
      • 1K analog input FIFO
    • Analog Input Module, 8-channel Independent
      Independent channel configuration allows up to eight types of signals to be processed by a single module. With older modules, each different type of signal required a separate module. (+)

      Features:

      • "The biggest advantage of this upgrade is that it will save you modules," says Mike Berryman, ADAM product manager. "You can take eight different types of analog inputs and pipe them into one module, and it'll pump out all the data in Modbus(R) to whatever software you like."
      • The ADAM-4019+ is a 16-bit, 8-differential channel analog input module with a 10Hz sampling rate. Its 4~20 mA input range satisfies most requirements in industrial automation applications.
      • Other frequently used input ranges include +/-10V, mV, and thermocouple, which are integrated into the ADAM-4019+.
    • USB-4704
      Data acquisition module (+)

      Features:

      45607.jpg
      • The USB-4704 is a 48 kS/s, 14-bit, 8-channel multi-functional module with analog I/O, digital I/O and counter functions specifically recommended for students or trainees
      • It comes packaged with Wavescan, a data logging tool that provides examples such as Visual C++, Visual Basic, Visual C#, Visual Basic .NET, Borland C++ builder, Delphi, and LabView for easy development
      • The USB-4704 has a price of $190, making this multi-functional USB module an excellent option for consumers looking for a low cost personal measurement tool [...]
    • PCI-1739U
      A 48-channel digital I/O universal PCI card for both 3.3 V and 5 V PCI bus signaling (+)

      Features:

      32668.jpg
      • Uses popular Opto-22 compatible 50-pin connectors for interfacing to many signal conditioning and termination options
      • Features an interrupt function that can output a digital signal synchronized with an internal PC interrupt generated by the card
      • Other features include software configurable digital I/O channels, 0 to 65 °C operating temperature, and digital output status read-back
  • Maxim Integrated  (1)
    • MAX111040K
      The MAX11040K/MAX11060 are 24-/16-bit, 4-channel, simultaneous-sampling, sigma-delta analog-to-digital converters (ADCs). The devices allow simultaneous sampling of as many as 32 channels using a built-in cascade feature to synchronize as many as eight devices. The serial interface of the devices allows reading data from all the cascaded devices using a single command. Four modulators simultaneously convert each fully differential analog input with a programmable data output rate ranging from 0.25ksps to 64ksps. The devices achieve 106dB SNR at 16ksps and 117dB SNR at 1ksps (MAX11040K). The devices operate from a single +3V supply. The differential analog input range is ±2.2V when using the internal reference; an external reference is optional. Each input is overvoltage protected up to ±6V without damage. The devices use an internal crystal oscillator or an external source for clock. FEATURES: 24-bit, 4-channel simultaneous sampling Sigma-Delta ADC Cascadable up to 8 devices and with per channel programmable phase adjustments. Greatly exceeding class 0.2 (0.2% error) accuracy for 220V and measures surge voltage up to 6000V. The per channel programmable phase adjustment guarantees true simultaneous sampling of the signal sources and true bipolar input simplifies design. [...] (+)

      Features:

  • Mercury Systems  (13)
    • Echotek Series DCM-V5-XMC
      A flexible FPGA-based architecture in a space-efficient mezzanine card form factor (+)

      Features:

      40594.jpg
      • User-programmable Virtex-5 FPGA functions as the primary data processor
      • Supported by Mercury's EchoCore firmware library
      • Two, single IF channel, Texas Instruments ADS6149 analog-to-digital converters
    • Echotek Series RF 1800GT
      An ultra high-performance wideband microwave receiver (+)

      Features:

      • Features a direct digital synthesizer, which uncouples tuning speed from phase noise
      • Highly suitable for signals intelligence and electronic warfare systems
      • Comprises two single-slot VME modules: the 1800RF radio frequency module and the 1800S synthesizer module; together, these modules form a microwave downconverter tunable over the entire 0.5 GHz to 18 GHz range, providing both narrowband and wideband outputs
    • ECDR-4814
      A 48-channel wideband/narrowband digital receiver with integrated analog input (+)

      Features:

      • 14-bit A/D
      • Four analog input channels using Analog Devices AD6644 A/D converter
      • 48 receiver channels operating at 70 Msamples/sec using GrayChip 4016 quad digital down converter chips
    • ECDR-GC812
      8 IF INPUTS TO FREQUENCIES UP TO 250 MHz (+)

      Features:

      • SIMULTANEOUS SAMPLING
      • EIGHT ANALOG TO DIGITAL CONVERTERS (ANALOG DEVICES AD9433, 12 BIT, 125 MSPS)
      • SFDR > 80 dB FS
    • ECDR-214-PMC
      An A/D converter and digital drop receiver PMC mezzanine (+)

      Features:

      • Suitable for wideband and narrowband down conversion and filtering
      • Data decimation range from 2 to 16384
      • Analog signals are converted using Analog Device's AD6644, 14-bit, 65 MHz A/D converters
    • ECDR-GC314
      A PCI bus-based wideband/narrowband, 12-channel, digital receiver family with integrated analog input (+)

      Features:

      • Boards accept three analog IF signals at frequencies up to 200 MHz, which are coherently digitized using 14-bit A/D converters at sampling rates up to 105 MHz
      • The SFDR of the A/D converters is in excess of 90 dBFS
      • Receivers can operate in three different modes: Raw A/D data mode, GC4016 receiver mode, or internal wideband receiver mode
    • Echotek Series ECV4-2
      The ECV4-2, with input clock capability up to 1.5 GHz, is the highest performing digital receiver in an XMC form factor in the industry (+)

      Features:

      • Echotek Series products lead the mixed-signal industry in extracting clear signals from electronic clutter, forming a bridge between the realms of analog signals and digital processing. After an analog signal is received by an antennae or other sensor, it must be digitized and manipulated into a form amenable to signal processing. The challenge, and the key to successful applications, is to manage this transformation in real time while maintaining the integrity of the original signal
      • Processing power is delivered by a Xilinx Virtex-4 FPGA (field-programmable gate array). This FPGA allows users to run customized algorithms such as digital down/up conversion (wideband or narrowband), Fast Fourier Transforms (FFTs), and filtering directly on the ECV4-2. Modules are available in air-cooled or conduction-cooled versions [...]
    • ECDR-412
      4-channel wideband/narrowband digital receiver (+)

      Features:

      • Accepts two analog signals at 70 MHz for direct digitization via Analog Devices' AD6620 digital decimating receivers
      • Spur-free dynamic range of 100 dB
      • Programmable FIR filters with 256 taps at 65 MHz clock speed
    • ECDR-GC214-PCI
      FOUR DIGITAL RECEIVER CHANNELS ON A PCI SHORT CARD (+)

      Features:

      • TWO ANALOG INPUTS AT IF'S > 200 MHz USES AD6644/45 (14 BIT, 65/80 MHz) ANALOG/DIGITAL CONVERTERS
      • RECEIVER CHANNELS CAN BE COMBINED FOR WIDER BANDWIDTH
      • COHERENT ON-RECEIVE CAPABILITY FOR PULSED APPLICATIONS
    • ECDR-1-1480-PMC
      14 BIT, 80 MSPS ANALOG TO DIGITAL CONVERTER (ANALOG DEVICES AD6645) (+)

      Features:

      • USER PROGRAMMABLE NUMERICALLY CONTROLLED OSCILLATOR
      • USER PROGRAMMABLE 63-TAP FIR FILTERS
      • 16K x 32 FIFO BUFFER FOR RECEIVER DATA. OTHER DEPTHS AVAILABLE
    • Echotek Series ECV4-4
      The Echotek Series ECV4-4 family of digital receivers implements a flexible baseboard plus mezzanine architecture while supporting an extremely high density of FPGA-processing power (+)

      Features:

      • This combination of flexibility and power allows the family to deliver unique capabilities, such as multi-board coherency, while addressing a range of analog signal requirements
      • Seven user-programmable Virtex-4 FPGAs plus one Stratix FPGA
      • Multiple backplane interfaces for VXS, RACE++, and VME64x
    • ECDR-GC314-PCI
      TWELVE DIGITAL RECEIVER CHANNELS ON A PCI SHORT CARD (+)

      Features:

      • THREE ANALOG INPUTS AT IF'S > 200 MHz USES AD6645 (14 BIT, 105 MHz) ANALOG/DIGITAL CONVERTERS
      • SFDR >90 dB SINGLE TONE, ~100 TWO-TONE
      • RECEIVER CHANNELS CAN BE COMBINED FOR WIDER BANDWIDTH
    • ECDR-GC214-PCI/TS
      FOUR DIGITAL RECEIVER CHANNELS ON A PCI SHORT CARD (+)

      Features:

      • TWO ANALOG INPUTS AT IF'S > 200 MHz USES AD6644/45 (14 BIT, 65/80 MHz) ANALOG/DIGITAL CONVERTERS
      • RECEIVER CHANNELS CAN BE COMBINED FOR WIDER BANDWIDTH
      • SYNCHRONIZATION CONTROL OF MULTIPLE RECEIVER AND TRANSMITTER BOARDS
  • Cypress Semiconductor  (1)
    • PSoC 4
      PSoC 4 is a custom mixed-signal SoC with programmable analog and digital blocks combined with flexible routing and interconnects (+)

      Features:

      • A new Programmable System-on-Chip (PSoC) architecture from Cypress Semiconductor combines analog and digital fabric with CapSense capacitive touch technology and the 32-bit ARM Cortex-M0 core
      • PSoC 4 is a custom mixed-signal SoC with programmable analog and digital blocks combined with flexible routing and interconnects
      • For analog input, the chip features a high-performance successive-approximation analog-to-digital converter with 12-bit resolution sampling at 1 Msps
  • ZTEC Instruments, Inc.  (8)
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      9289.jpg
      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZTC400SCU
      Analog input: DC to 150 MHz bandwidth (+)

      Features:

      • Analog signal range: 1V maximum
      • 500 MSamples/sec sample rate
      • 12-bit ADC resolution
    • ZT621VXI
      Two channels simultaneous full speed (+)

      Features:

      • 1 Gsample/sec single shot
      • signal processing, range offset, coupling, impedance, sampling rate, and analog filtering
      • 300MHz analog bandwidth
    • ZT442 family
      A family of three complete, high performance digital storage oscilloscopes (+)

      Features:

      14829.jpg
      • Two channels simultaneous full-speed
      • 1 GSample/sec single shot
      • Flexible signal processing, range, offset, coupling, impedance, sampling rate, and analog filtering
    • Z1428VXI
      A full featured digital storage oscilloscope for both legacy and next generation modular instrumentation systems (+)

      Features:

      16009.jpg
      • 2 channels simultaneous, 8-bit resolution
      • 1 GSps, 250 MHz analog bandwidth
      • 1 MS record length per channel
    • ZT432VXI
      2 channel (PXI) or 4 channels simultaneous (VXI), 12-bit resolution (+)

      Features:

      • 200 MS/s, 90 MHz analog bandwidth
      • Up to 4 MS record length per channel
      • Programmable range, offset, coupling, impedance, sampling rate, and analog filtering
    • ZT442PXI
      2 Channels Simultaneous Acquisition (+)

      Features:

      • 1 GSample/s Single Shot
      • Flexible Range, Offset, Coupling, Impedance, Sampling Rate, & Analog Filtering
      • 300 MHz Analog Bandwidth
  • Micro/sys, Inc.  (12)
    • SBC0489
      A single board solution in a 5” x 5” footprint (+)

      Features:

      • Implemented with the STPC Atlas processor, with speeds from 66 MHz to 133 MHz, on-chip cache, 64-bit DRAM access, hardware floating point, and AT-compatible interrupt, timer, and DMA controllers
      • Includes COM1, COM2, LPT1, SuperVGA, keyboard, mouse, floppy, IDE, and an 8” x 8” matrix touchscreen or keypad interface
      • Includes digital I/O, analog-to-digital converters, digital-to-analog converters, and Ethernet support for 10Base-T and 100Base-T
    • MPC560
      A PC/104 I/O module (+)

      Features:

      14715.jpg
      • Includes 32 channels of 16-bit analog-to-digital input and four channels of 14-bit digital-to-analog output
      • The analog input subsystem includes programmable gain amplifiers, programmable low pass filters, a 16-channel differential input mode, and input overvoltage protection ±40V, with power on or off
      • Analog output system includes one-pole low-pass filters, and output buffers capable of driving cables and other highly capacitive loads
    • MPC550
      Analog, digital, and timer I/O for PC/104 (+)

      Features:

      • 16 12-bit channels of analog input
      • 100 kHz A/D sampling rate
      • Software selectable A/D input ranges
    • MPC555 Analog, Digital, Timer I/O for PC/104
      Sixteen 12-bit channels of analog imput (+)

      Features:

      • 100kHz A/D sampling rate
      • Software selectable A/D input ranges
      • 24 digital I/O lines
    • MPC500
      General purpose combination interface for PC/104 (+)

      Features:

      • 31 TTL I/O, one 0 to 5V analog input, one 0 to 5V analog output
      • Direct connect to signal conditioning module racks
      • PAMUX compatible connector for both analog and digital I/O on ribbon cable
    • OPTO104
      An optically Isolated Analog and Digital I/O Module Rack On EPIC footprint (+)

      Features:

      • Designed for use in rugged, industrial systems where analog and digital I/O require high-voltage isolation
      • Accepts up to eight G4 or G5 OPTO modules for isolated digital and analog I/O
      • Remote slave OPTO104 boards can be added via a ribbon cable
    • SBC1190
      A small embeddable PC that includes a large mix of I/O and firmware on a single PC/104-sized module (+)

      Features:

      10830.jpg
      • Two RS232/RS485 COM ports
      • 24 TTL-compatible I/O lines
      • Eight analog in, 4 analog out (optional)
    • Netsock/400
      Ready-to-run embedded PC (+)

      Features:

      • 10BASE-T Ethernet port with onboard Embedded Netsock TCP/IP stack
      • 8.5” X 5” format with PC/104 expansion
      • 486DX CPU, 66, 100, or 133 MHz
    • Netsock/100
      A turnkey, network-oriented platform on which to build embedded systems (+)

      Features:

      • Based on the Micro/sys SBC1190 embedded PC
      • 10Base-T Ethernet port with onboard TCP/IP stack
      • Small PC/104 format and expansion
    • Netsock/410
      Ready-to-run embedded PC (+)

      Features:

      • 10/100Base-T Ethernet port with onboard Embedded Netsock TCP/IP stack
      • Small 5"x 5" format with PC/104 expansion
      • 486DX CPU, 66 or 80 MHz
    • Netsock/310
      An embedded 386EX PC with a built-in UDP/IP stack (+)

      Features:

      • 386EX processor at 35 MHz
      • Ethernet port with onboard embedded Netsock UDP/IP stack
      • 1 Mbyte of RAM and 512 Kbytes of Flash memory
    • Netsock/300
      Ready-to-run embedded PC (+)

      Features:

      • 10Base-T Ethernet port with onboard Embedded Netsock TCP/IP stack
      • 8.5” X 5” format with PC/104 expansion
      • 386EX CPU, 25 MHz
  • Oceana Sensor  (1)
    • Wireless Sensor Module
      Wireless Sensor Module (WSeM), working with GainSpan and Quickfilter Technologies for the newest and smallest in integrated Wi-Fi and A/D chipset technology (+)

      Features:

      34929.jpg
      • Measures 17 mm x 39 mm
      • Contains an analog to digital converter/filter, an onboard ARM7 processor, and 802.11 wireless communication capability all on one PCB
      • Can accommodate up to four different analog sensor inputs
  • Avnet Electronics Marketing  (3)
    • AMC-E24D
      ATI Radeon E2400 graphics processor for superior 2D and 3D graphics acceleration (+)

      Features:

      42420.jpg
      • 128 MB on-chip GDDR3 video memory
      • Dual independent high-performance display interfaces - HDMI/DVI-D and analog VGA
      • Dual integrated triple 10-bit DACs for dual RGB output
    • Xilinx Kintex-7 FPGA DSP Development Kit
      DSP FPGA board featuring High-Speed Analog: http://www.em.avnet.com//en-us/design/drc/Pages/Xilinx-Kintex-7-FPGA-DSP-Development-Kit-with-High-Speed-Analog.aspx [...] (+)

      Features:

    • PMC-E24D Graphics
      A versatile, low cost, high-performance graphic PMC featuring the ATI Radeon E2400 graphics controller (+)

      Features:

      39451.jpg
      • Independent DVI-I and VGA outputs support up to 1600 x 1200 resolution
      • Dual independent high-performance display interfaces: DVI-I and analog VGA using full size connectors
      • LVDS available
11/4/17 04:23
Close

Subscribe to Analog updates