Analog

Showing results for: a/d
Refine Analog companies and products:
analog analogue analog circuit analog ic analogue circuit analogue ic analog to digital digital to analog a/d d/a adc dac continuous signal
Click on any vendor
to see a listing of
a/d related products.
  • STEC, Inc.  (2)
    • MACH16 Slim SATA SSD
      MACH16 Slim SATA Embedded SSD leverages industry-standard 22-pin SATA cabling to provide the highest data integrity, endurance and reliability available. It is ideal for high-performance and rugged embedded systems requiring a true workhorse SSD and a 2.5� HDD replacement. (+)

      Features:

      197144264242605930.jpg
      • CellCare Technology
      • Proprietary SSD Controller and Firmware
      • Secure Array of Flash Elements (SAFE) Technology
    • Embedded SSD
      The Slim SATA and CFast designs are the smallest industry-standard solid state drive (SSD)formats available making them the perfect storage solutions for embedded system designs (+)

      Features:

      44545.jpg
      • True SSD performance in compact designs
      • Smallest industry standard formats (less than half the size of an HDD) perfect for space-constrained applications
      • Higher performance than traditional rotating disk drives due to 0 latency (no seek time) and far higher inputs/outputs-per-second (IOPs)
  • Phoenix International  (14)
    • VP1-250-SSDX
      This 3U VPX SATA solid state disk module delivers high capacity, high performance data storage for military, aerospace and industrial applications requiring rugged, secure and durable mass data storage.Configurable with SLC or MLC SSDs of up to 8TB capacity, the VP1-250-SSDX is available in air cooled and conduction cooled configurations and supports AES 256 encryption. When used with supporting devices, the VP1-250-SSDX supports the "purge" signal to destroy the media or the "Zeroize" that performs a DOD approved erasure of the media.The VP1-250-SSDX's outstanding performance and versatility is enabled by Phoenix International's state-of-the-art technology which provides very high transfer and I/O rates, enhanced endurance and maximum data integrity. (+)

      Features:

      366111738601968609.jpg
      • SLC or MLC SATA Solid State Disk
      • VITA 48/REDI Conduction Cooled
      • Operational Altitude to 80,000 Feet
    • VC1-250-SSD
      A SATA interface Conduction Cooled VME Module (+)

      Features:

      45496.jpg
      • This 6U, single-slot module houses one or two each 2.5" SATASolid State Disks (SSDs) of up to 256GB per device
      • The high speed module will sustain R/W data rates of 220MB/sec with an access time of 0.5 msec
      • The VC1-250-SSD has an operating temperature range from -40 °C to 85 °C and functions at an altitude greater than 80,000 feet. The VC1-250-SSD also complies with current defense department security standards providing multiple levels of secure erase technique
    • VC1-250-SSD
      A SATA interface Conduction Cooled VME Module (+)

      Features:

      45496.jpg
      • This 6U, single-slot module houses one or two each 2.5" SATASolid State Disks (SSDs) of up to 256GB per device
      • The high speed module will sustain R/W data rates of 220MB/sec with an access time of 0.5 msec
      • The VC1-250-SSD has an operating temperature range from -40 °C to 85 °C and functions at an altitude greater than 80,000 feet. The VC1-250-SSD also complies with current defense department security standards providing multiple levels of secure erase technique
    • VP1-250-SSD/HDD
      Solid State Disk or Hard Disk Devices (+)

      Features:

      366030392861120341.jpg
      • Conduction, REDI Conduction and Air Cooled Configurations
      • Supports SATA and PCI Express interfaces
      • Up to 80,000 Feet Operational Altitude
    • VS/C1-250-SSD
      VME Conduction Cooled Serial ATA (SATA) based Solid State Disk VME blade delivers high capacity, high performance data storage for applications requiring rugged, extreme environments (+)

      Features:

      43730.jpg
      • SATA Solid State Disk VME Module
      • Conduction or Convection Cooled
      • High Capacity
    • V(F/M)2-350-SC-SSDx-xxx
      A 6U, 2-slot, solid-state disk drive (+)

      Features:

      • Flash memory
      • Up to 18 Gbytes capacity
      • Automatic internal active termination
    • V(F/M)1-350-SC-SSD-xxx
      A 6U, single-slot, solid-state disk drive (+)

      Features:

      • Flash memory
      • Up to 9 Gbytes capacity
      • Automatic internal active termination
    • VL1-350-SC-SSD
      Phoenix International's Rugged Ultra320 SCSI VME Solid State Disk Module is a state-of-the-art solution based on Flash technology (+)

      Features:

      43732.jpg
      • An ideal drop-in replacement
      • SCSI Solid State Disk VME Module
      • 8 bit Narrow or 16 bit Wide (LVD) Interface
    • VS1-250-SSD
      World's first SAS/SATA Solid State Disk VME blade delivers high capacity, high performance data storage for military, aerospace and industrial applications required to be rugged, secure (+)

      Features:

      41483.jpg
      • Burst data transfer rate to 300MB/sec
      • Sustained data transfer to 120MB/sec
      • Total capacity to 512GB
    • RPC24
      A High performance Fibre Channel/SAS/iSCSI RAID system featuring a capacity of 24 drives, the RPC24 includes two removable magazines containing up to 12 solid state disk or hard disk drives, each housed in rugged 2U enclosure. The unique design of the RPC24’s rugged, cableless, backplane-based, high density 2U chassis provides a broad environmental operational envelope (-20° to +70° C, 45,000 ft altitude with SSDs), redundant, hot-swap components. The RPC24 weighs only 51 lbs, is less than 20” deep and is certified to military specifications MIL-STD-810G and MIL-STD-461E. (+)

      Features:

      226159581157438754.jpg
      • Two 12 Drive Removable Magazines rated at 10K mating cycles
      • certified to military specifications MIL-STD-810G and MIL-STD-461E
      • Single or Dual Active with Auto Failover/Failback RAID Controllers
    • VP1-250X
      Solid State Disk or Hard Disk Devices (+)

      Features:

      353925166861866675.jpg
      • Conduction, REDI Conduction and Air Cooled Configurations
      • Supports SATA, SAS and PCI Express interfaces
      • Up to 80,000 Feet Operational Altitude
    • VS1-250-SS/SA
      Can be configured with SAS and/or SATA Hard Disk or Solid State Disk Drives (+)

      Features:

      37068.jpg
      • Storage capacity to 640 GB in a Single 6U VMEbus Slot
      • Very Low Power Consumption
      • Dual Drive Configurations may be mirrored for Data Redundancy or Stripped for High Data Throughput
    • VP1-250X VPX Solid State Data Storage
      Conduction, REDI Conduction (pictured) or Air Cooled (+)

      Features:

      315643018861291442.jpg
      • Supports SATA, SAS and PCI Express interfaces
      • Up to 80,000 Feet Operational Altitude
      • Operational Temperature from -40° to +85° C
    • VL1-350-SC-SSD
      An Ultra-320 SCSI VME plug-in storage module incorporating a U-320 solid state flash disk (+)

      Features:

      31343.jpg
      • Unformatted storage capacity to 128 GB
      • Burst Read/write transfer rate to 320 MBps, sustained to 50 MBps
      • Access time of less than 0.02 ms
  • SANBlaze Technology, Inc.  (8)
    • ATCA2000 SSD Blade
      The ATCA2000 SSD Blade with networked flash revolutionizes the bandwidth and capacity achievable with a single ATCA slot. With up to 6TB of solid state flash storage capacity, it boasts 1500MB/s of sustained backplane bandwidth, high IOPS (25,000) and low latency. (+)

      Features:

      18305179820966366.jpg
      • AdvancedTCA storage blade
      • SSD Blade with networked flash
      • Supports up to ten 2.5” hot swappable, enterprise class SSD (solid state drives), using MLC, eMLC or SLC based flash chips
    • SB-RTM468
      The SB- RTM468 accommodates up to eight 1.8-inch SSD drives which can combine to provide over 2 terabyte (TB) of storage in a field serviceable, AdvancedTCA compliant RTM (+)

      Features:

      52526.jpg
      • Designed for NEBS-3 class endurance
      • PCI Express (PCIe) to access multi TB solid-state storage capacity
      • Accommodates up to 8 SSD with factory-configured choice of MLC, eMLC or SLC SSD
    • SB AMC-SSD
      AdvancedMC Solid State Drive Module (+)

      Features:

      32125.jpg
      • Rugged, high capacity, high throughput, mission critical AdvancedTCA and MicroTCA storage design requirements
      • Storage options up to 64 GB
      • Nonvolatile memory and no moving parts
    • SB-AMC59
      Quad Gigabit Ethernet module with SSD (+)

      Features:

      45522.jpg
      • Four 1 Gb RJ-45 ports
      • AMC.1 Gen2 PCIe x4
      • AMC.3 Solid State Disk (optional)
    • AMC-62E
      AMC.3 compliant disk drive module utilizing newly available extreme-environment SATA drives with enhanced thermal, shock and duty cycle characteristics (+)

      Features:

      34458.jpg
      • The module provides storage up to 80G, with temperature support of 0 ºC to +85 ºC, full (7 x 24) duty cycle and MTBF of 750,000 hours, combining the extended environmental requirements of NEBS and AdvancedTCA chassis with the price/performance of SATA disk technology
      • Augments existing AdvancedMC disk offerings from SANBlaze, which include solid state disks, SATA disks, and SAS disks [...]
    • SB-RTM468™
      Rear transition module (RTM) for ATCA (+)

      Features:

      52517.jpg
      • Accommodates up to 8 1.8 “ SSD drives which can combine to provide over 2 terabyte (TB) of storage
      • RTM featuring PCIe to Solid-State Storage
      • ATCA PICMG 3.0
    • SB-RTM468
      The SB-RTM468 rear transition module (RTM) for ATCA accommodates up to 8 1.8 “ SSD drives which can combine to provide over 2 terabyte (TB) of storage (+)

      Features:

      52505.jpg
      • RTM featuring PCIe to Solid-State Storage
      • ATCA PICMG 3.0
      • PCI express Gen2 signaling
    • SB-RTM431
      The SANBlaze SB-RTM431 is rear transition module (RTM) that features a SAS expander and two removable disk FRU (field replaceable units) (+)

      Features:

      45179.jpg
      • The innovative disk sled fits wholly within the RTM thermal envelope, providing a deterministic environment for proper disk cooling
      • The front AdvancedTCA board connection conforms to the 3-row Advanced RTM standard
      • Buying configurations exist for SAS, SATA or SSD 2.5" disk drives
  • Viking Modular Solutions  (3)
    • Slim SATA SSD
      Rugged, caseless Solid-State Drive (+)

      Features:

      46029.jpg
      • Less than half the size of a 2.5" SSD
      • JEDEC MO-297 industry standard
      • 3 Gb SATA II interface
    • SATA Cube3
      Ultra small form-factor and rugged embedded SATA SSD (+)

      Features:

      • Optimized for defense, aerospace, embedded and industrial applications where there is a need for extreme environmental reliability, specifically those of shock, vibration and temperature
      • Has successfully completed tests pursuant to the MIL-STD-810F
      • The SATA Cube3 features a SATA II (3 Gbps), 4 channel interface, with read and write performance up to 110 MBps (Megabytes per second) and offered in densities of 4 GB to 128 GB
    • SATA Cube3
      The SATA Cube3 features a SATA II (3Gb/s), 4 channel interface, with read and write performance up to 110MB/s (Megabytes per second) (+)

      Features:

      • Offered in densities of 4GB to 128GB
      • Constructed with processor technology that delivers SMART command support, wear leveling and a robust ECC management engine, the SATA Cube3 is available as either a 30x32mm BGA (Ball Grid Array) solder down device or as a removable drive by using the industry standard MicroSATA connector
      • The SATA Cube3 offers designers of space constrained form factors such as AdvancedTCA, MicroTCA, AdvancedMC, PMC and XMC a SerialATA SSD with a low-volumetric density (86% smaller X-Y footprint than a 2.5" HDD/SSD) while still maintaining a high storage capacity (up to 128GB) [...]
  • KingSpec  (1)
    • ACSC4MXXXS25
      A solid-state drive (SSD), also called a flash drive, is type of hard drive. Though the architecture of an SSD is quite different from traditional hard drives, the name is carried over. An SSD utilizes a special kind of memory chip with erasable, writeable cells that can hold data even when powered off. It might help to think of an SSD as the larger cousin of the memory stick. (+)

      Features:

      320774051122206218.jpg
      • Fast speed
      • large capacity
      • good price
  • RunCore  (1)
    • PMC
      RunCore HurricaneI PMC Solid State CardSolid State Drive (+)

      Features:

      52180.jpg
      • High Performance
      • High Capacity
      • Data Security
  • Red Rock Technologies, Inc.  (12)
    • 3.5" 68-Pin SCSI Wide Solid State Drive
      The 3.5" 68-pin SCSI Wide Solid State Drive (SSD) is a proprietary FPGA based design that provides a long term solution for replacement of obsolete SCSI drives. The design provides a transparent interface from the SCSI bus to a COTS 2.5" SATA SSD. The drive can be configured to provide specific capacities for applications that only work with low capacity drives. [...] (+)

      Features:

    • 3.5" 80-Pin SCSI Wide SSD
      The 3.5" 80-pin SCSI Wide Solid State Drive (SSD) is a proprietary FPGA based design that provides a long term solution for replacement of obsolete SCSI drives. The design provides a transparent interface from the SCSI bus to a COTS 2.5" SATA SSD. The drive can be configured to provide specific capacities for applications that only work with low capacity drives. [...] (+)

      Features:

    • 3U VPX SATA Drive Module
      The 3U VPX SATA Drive Module provides storage using COTS 2.5" Hard Disk Drives (HDD) or Solid State Drives (SSD) with various capacity, speed and cost options. Add the optional front panel CFAST port for additional removable storage. CFAST is the same form factor as Compact Flash but has a SATA Interface for faster speeds. CFAST is the technology path forward. [...] (+)

      Features:

    • VME SATA Carrier with Removable Drive Mo
      The 6U VME SATA Carrier with Removable Drive Modules consists of 2 components; the 6U VME carrier board mounted in the 6U VME chassis and support for one or two removable drive modules. The connectors between the drive module and carrier are rated for 100,000 mating cycles to support frequent insertions/removals. The drive module can use any COTS 2.5” SATA Hard Disk Drive (HDD) or Solid State Drive (SSD) providing capacities up to 1TB and sustained transfer rates up to 250 MB/S. Options for purge, erase, destroy via discrete. (+)

      Features:

      • 6U VME carrier SATA interface factory configured for P0 or P2.
      • Fast, efficient field replacement
      • Commercial and extended temperature versions
    • 3.5" 68-Pin SCSI Wide Differential SSD
      The 3.5" 68-pin SCSI Wide Differential (High Voltage Differential) Solid State Drive is a proprietary FPGA based design that provides a long term solution for replacement of obsolete SCSI drives. The design provides a transparent interface from the SCSI bus to a COTS 2.5" Solid State Drive. The drive can be configured to provide specific capacities for applications that only work with low capacity drives. [...] (+)

      Features:

    • 3.5" 68-Pin SCSI Wide LVD SSD
      The 3.5" 68-pin SCSI Wide Low Voltage Differential (LVD) Solid State Drive (SSD) is a proprietary FPGA based design that provides a long term solution for replacement of obsolete SCSI drives. The design provides a transparent interface from the SCSI bus to a COTS 2.5" SATA Solid State Drive. The drive can be configured to provide specific capacities for applications that only work with low capacity drives. [...] (+)

      Features:

    • 3U VPX Removable SATA Drive Module
      The 3U VPX Removable SATA drive module consists of 2 components; the 3U VPX carrier board mounted in the 3U VPX chassis and the removable SATA drive module. The connectors between the drive module and carrier are rated for 100,000 mating cycles to support frequent insertions/removals. The drive module can use any COTS 2.5” SATA Hard Disk Drive (HDD) or Solid State Drive (SSD) providing capacities up to 960 GB and sustained transfer rates up to 250 MB/S. Options for purge, erase, destroy via discrete. (+)

      Features:

      • OpenVPX Ultra Thin Pipe (UTP) storage module profile MOD3-STO-1U-16.5.1-x.
      • 3U VPX Storage VITA 46, 47, 48, 65
      • Conduction or air cooled versions
    • PMC Removable 1.8" SATA Drive Module
      The PMC Removable 1.8” SATA drive module is a PMC mezzanine card that supports either a hard drive or a solid state drive (SSD). Provides up to 512GB of additional storage for VPX, VME, cPCI, and ATCA single board computers (SBCs) with a PMC slot. (+)

      Features:

      • PCI 32-bit data at 33MHz.
      • Uses COTS 1.8" SATA drives for wide variety of capacity/speed options
      • Capacities up to 512GB per PMC module
    • Conduction Cooled PMC Compact Flash Module
      Utilizes CompactFlash Solid State Drives SSD and has a capacity of up to 32GB in a single PMC slot. Ruggedized for extreme temperature, shock and vibration environments. (+)

      Features:

      • Conduction cooled for extreme temperature environments
      • Ideal for rugged higher shock & vibration environments.
      • PCI 32-bit data at 33MHz/66Mhz.
    • VME SATA Solid State Drive Modules
      Capacity of up to 768GB in a single 6U VMEbus Slot. SATA 2 compliant interface with speeds up to 3Gbits/S. [...] (+)

      Features:

    • 3.5" 50-Pin SCSI Narrow Solid State Drive
      The 3.5" 50-pin SCSI Narrow Solid State Drive is a proprietary FPGA based design that provides a long term solution for replacement of obsolete SCSI drives. The design provides a transparent interface from the SCSI bus to a COTS 2.5" SATA Solid State Drive. The drive can be configured to provide specific capacities for applications that only work with low capacity drives. [...] (+)

      Features:

    • VME SCSI Ultra3 Module with Removable SA
      Ultra3 SCSI interface supports 8-bit narrow/16-bit wide, single ended SE/ low voltage differential LVD modes. (+)

      Features:

      • Fast, efficient field upgrades with removable 2.5â€? drive.
      • Removable drive is ruggedly secured.
      • Ideal for extreme shock & vibration environments.
  • Texas Memory Systems, Inc.  (1)
    • RamSan-620
      High-performance Solid State Disk (SSD) (+)

      Features:

      • 250,000 IOPS
      • 3 GBps throughput sustained
      • 0.8 ms latency
  • Arrival Electronics  (1)
    • Ferri - Single Chip Solid State Drive
      Silicon Motion Leverages the industry leading technologies and experiences in NAND flash memory controller along with Multi-Chip Package (MCP) solution to introduce FerriSSD®- the fully integrated SATA/PATA Solid State Drive(SSD) in a single BGA package. FerriSSD® is designed optimally for a wide range of embedded applications that behaves like a SATA/PATA hard drive featuring fast access time and enhanced endurance. The combination of Silicon Motion advanced technologies enables FerriSSD® to deliver the most robust data integrity and protection in the market. FerriSSD® is available in a variety of densities for different storage needs. With high reliability, industry-leading performance and programmable firmware, FerriSSD® is the ultimate non-volatile storage solution this is easy to design and manufacture for today’s fast-moving consumer electronics as well as industrial level applications. Parts are available with PATA and SATA interfaces and in both Commerical and Industrial Grade and available in densities of upto 64GB Commercial and 32GB Industrial temperature ranges (-40°C to 85°C) . Also available in module form Applications Include : Handheld/portable devices Blu-ray player/recorder/imaging applications Automotive infotainment system/GPS Network/telecommunication applications IPC/POS/MFP/HMI Test instrument Thin client All other embedded storage applications FEATURES: Easy-to-Use -� The Plug & Play device only requires format/fdisk prior to use High-Efficiency Error Correction -� Advanced Hardware BCH Error Correcting Code (ECC) Engine -� StaticDataRefresh and EarlyRetirement technologies ensure the data reliability Advanced Global Wear Leveling -� Even distribution of program/erase cycles across all NAND flash chips -� Maximizes the SSD lifespan with low Write Amplification Index (WAI) Robust Data Protection -� Software/hardware write protect option - Multiple user data security zones - Software/hardware secure erase function - PowerShield and DataPhoenix technologies prevent data corruption in case of sudden power lost SSD Health Monitoring - Supports Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) commands -� Provides SSDLifeGuard® application for real time SSD health status monitoring and warning Available in SLC and MLC NAND Flash, and densities from 1GB to 64GB [...] (+)

      Features:

  • Apacer Technology Inc  (3)
    • 512GB SATA 3.0 SAFD25A SSD
      During the 2012 AUVSI (Association for Unmanned Vehicle Systems International) show in Las Vegas at Booth #2054, Apacer will be showcasing and demonstrating our latest industrial Solid State Drive solutions specifically targeting industrial and aerospace application fields where utmost reliability and performance under extreme conditions are of the essence. Apacer will debut our newest embedded SAFD 25A SSD solution with SATA 3.0 interface that will deliver high IOPs at a capacity of 512GB. (+)

      Features:

      209749182901171643.jpg
      • Can sustain extended temperature ranges (-40°C ~ 85°C)
      • SATA 3.0 interface
      • SATA 3.0 interface
    • mSATA industrial SSD for Ultrabooks
      Apacer, the leading manufacturer of industrial SSDs, has produced a new mSATA S1-M modular SSD that features a SATA 3.0 high-speed transmission interface and complies with the JEDEC MO-300 standard (+)

      Features:

      • mSATA Connector
      • Mini PCIe form factor (50.8 x 29.8mm)
      • Compliant with JEDEC MO-300 standard
    • AFD II
      Apacer's ATA-Flash Drive (AFD) is a high-performance, reliable solid-state drive designed to replace a conventional IDE hard disk drive (+)

      Features:

      • Implements dynamic wear-leveling algorithms to substantially increase longevity of flash media
      • Compatible with IDE interface
      • Solid-state drive, shock resistant and anti-vibration
  • Avnet Electronics Marketing  (7)
    • PMC SD18 and XMC-SD18 SATA HDD or SSD Storage Modules
      These new SATA Storage Modules are offered in both PMC and XMC formats (+)

      Features:

      45802.jpg
      • Both provide high capacity SATA storage using compact 1.8 inch hard disk (HDD) or solid state drives (SSD) – up to 160GB of storage is available with either drive type
      • Whether configured with an economical rotating HDD or with a highly shock-resistant SSD, these low profile modules fit comfortably into VITA 42.3-compatible VME, CompactPCI, AdvancedTCA, and PCI Express processor boards without risk of mechanical interference
      • The onboard 4-port SATA controller provides 3 additional external drive interfaces
    • PMC-SD18 and XMC-SD18 SATA HDD/SSD Storage Modules
      SATA Storage Modules offered in both PMC and XMC formats (+)

      Features:

      41871.jpg
      • Provide high-capacity SATA storage using compact 1.8" hard disk drives (HDDs) or solid state drives (SSDs)
      • Up to 160 GB of storage is available with either drive type
      • Whether configured with an economical rotating HDD or with a highly shock-resistant SSD, these low-profile modules fit comfortably into VITA 42.3-compatible VME, CompactPCI, AdvancedTCA, and PCI Express processor boards without risk of mechanical interference
    • XMC-SD18 SATA Board
      Compact, high capacity SATA XMC storage card uses latest 1.8 inch hard disk drives or solid state drives (including Intel X18-M SSD) to provide convenient on-blade storage (+)

      Features:

      40588.jpg
      • Unique XMC features 1.8 inch uSATA HDD or SSD
      • Choose low-cost rotating HDD for normal uses or rugged SSD for high shock and vibration
      • Storage capacities up to 160 GB
    • PMC-SD18 SATA Card
      This new module provides high capacity SATA storage using compact 1.8 inch hard disk (HDD) or solid state drives (SSD) in a low profile PMC package (+)

      Features:

      41920.jpg
      • High-capacity 1.8 inch SATA storage PMC
      • Up to 160 GB storage capacity
      • Choose low-cost rotating HDDs for normal uses, or rugged SSDs for high shock and vibration
    • AMC-E24D Dual Display Graphics+Storage Module
      This mid-size AMC offers both high performance dual display graphics and SATA onboard storage in a single module (+)

      Features:

      45801.jpg
      • Featuring the AMD Radeon E2400 graphics controller, the AMC-E24D module supports two independent high resolution display devices (one digital HDMI and one analog VGA) and features 128MB of on-chip GDDR3 video memory for fast, high quality 2D and 3D graphics rendering
      • In addition, the module adds enterprise-grade SATA storage to xTCA systems
      • It carries a 2.5 inch hard drive (HDD) or solid state drive (SSD) with up to 320GB capacity for convenient local boot-up and storage
    • ATCA-N1 (Dual Intel Xeon E5 ATCA)
      The ATCA-N1 blade is a high performance computing platform that is designed to provide maximum computing, memory and storage flexibility in a single ATCA chassis slot (+)

      Features:

      • Intel-based AdvancedTCA blade server utilizing Intel’s 32 nm processor technology
      • Dual purpose memory sockets enable the use of up to 4 x SATADIMM solid state drives
      • mSATA solid state drive provides flexible expansion storage/boot option
    • CP86-N2 (Intel Core i7 cPCI x86 Blade)
      PDSi’s Intel-based CompactPCI x86 Processor Blade (CP86-N2) provides a robust, high-performance general purpose compute platform for use in CompactPCI PICMG 2.16 systems (+)

      Features:

      • Intel-based CompactPCI blade server utilizing Intel’s 22nm processor technology
      • Intel Core i7-3612QE, i7-3615QE
      • Up to 16GB, ECC, Unbuffered, DDR3,1066 / 1333 MHz Memory
  • Kontron  (6)
    • AM4510
      The Kontron AM4510 SATA storage AMC modules use Intel's leading SSD for Native Serial Advanced Technology Attachment (SATA) hard disk drive (+)

      Features:

      43547.jpg
      • Enhanced performance, reliability, ruggedness, and power savings
      • Since there are no rotating platters, moving heads, fragile actuators, unnecessary pinup time, or positional seek time that can significantly slow down the storage subsystem, the Intel X25-E SATA SSD enables fast read/write access times and significant I/O, as well as performance improvement when compared to rotating media
      • Will be offered with a 64 GB storage capacity and will be compatible with Kontron's family of AdvancedTCA processor and carrier blades as described by the PICMG AMC.0 R2.0 and AMC.3 R1.0 specifications
    • CP6014 2 Quad-Core
      Dual Intel Quad-Core Xeon (+)

      Features:

      36016.jpg
      • Dual Intel Dual-Core Xeon
      • Intel 5100 MCH chipset and Intel I/O Controller Hub 9R
      • 2.13 GHz core frequency (45nm),1066 MHz FSB, and on-die L2 cache of 12 MB (2x6 MB)
    • OBSERVO
      Specially designed for surveillance data recording in harsh environments which require integrated mass storage and data integrity (+)

      Features:

      • Based on 3U CompactPCI technology which offers modularity and longevity in a robust design
      • Can be configured to meet the specific application needs for video, radar or sonar data recording in markets such as transportation, military, government and industrial automation
      • Can be configured with several feature and performance options thanks to its turnkey platform
    • CP6014
      CompactPCI 2.16 8HP Dual Intel Quad-Core Processor Board (+)

      Features:

      39460.jpg
      • Dual Intel Quad-Core Xeon LV L5408 (45 nm technology) processor board, complemented by the cost-optimized Intel 5100 MCH chipset and Intel I/O Controller Hub 9R
      • Targets storage, wireless infrastructure, security, voice, and the medical market segments
      • Upgrade and extend the life of deployed CompactPCI systems, reduce up to 10 single core boards to 1 dual quad-core board, and configure a super computer platform with up to 7 quad-core boards
    • CP-ASM3-RAID
      High-speed RAID array comprising up to 8 SATA-II hard disks (SATA 3.0 Gbps) or Solid State Drives and excels with high availability and high shock and vibration resistance (+)

      Features:

      43154.jpg
      • Thanks to the use of electronic components with protective coating, the fanless system design is securely protected against humidity and dust
      • Even when using standard hard disks it achieves an impressively long lifecycle in operating temperatures of 0 °C to +55 °C
      • The robust Kontron CP-ASM3-RAID server can be used in applications such as: mobile or stationary video surveillance, in public transport or tunnel surveillance, video and audio streaming and digital image processing for controlling various production processes
    • CG2100
      Carrier Grade Server, with support of the Intel Xeon Processor 5600 series, further extending Kontron's commitment to Telco customers by providing the latest in state-of-the-art rack mount servers (+)

      Features:

      • Combines high performance, ruggedness, reliability, and long life in a NEBS-3 and ETSI-compliant 2U chassis
      • Suits the demanding environment and limited space of the Telco central office, as well as for network data centers
      • Enables OEMs and TEMs to create specialized, value-added solutions for a variety of telecom applications including unified messaging, SoIP, call control, media and signaling gateways, and operational system support
  • Swissbit  (3)
    • Swissbit X-500 Series Industrial SATA II 2.5" SSD
      The Swissbit X-500 Series Industrial SATA II SSD 2.5“storage solution is designed for demanding applications. The Solid State Drive is a rugged, high performance and extremely reliable storage solution. The data rate reaches up to 240 MB/sec and an impressive 14’500 IOPS with 4 KB random accesses. The high end architecture utilizes up to 8 channels with the most reliable SLC NAND Flash on the market. Special features such as ATA-8, NCQ and TRIM support enable higher IOPS (input / output per second) and sequential performance providing the best combination of performance and reliability for industrial applications. Additionally, the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) protocol with extended lifetime monitoring tools and software development kit enables the application or designer to have the full control of mission critical data all the time. The BCH-ECC (error correction code) ensures data reliability with the power fail protected X-500 series. FEATURES: Power Fail Protection High random IOPS & sequential performance SLC NAND Flash for best reliability & durability Ruggedized for “no-compromise� design Self Monitoring Analysis and Reporting Technology (S.M.A.R.T.) Life Time Monitoring Application & Software Development Kit (SDK / API) Controlled BOM & PCN Process [...] (+)

      Features:

    • X-200 Series
      Swissbit unveils the newest addition to their INDUSTRIAL 2.5" Solid State Drive (SSD) line with the introduction of the X-200 Series (+)

      Features:

      • This rugged series of SSDs supports a Serial ATA (SATA II-3Gbit/s) interface and offers an array of valuable features
      • Because SSDs have no moving parts, vibration and shock tolerance is extended significantly compared with traditional Hard Disk Drives (HDDs), making them a suitable choice for industrial and mobile applications where durability and reliability are crucial
      • No moving parts also remove the mechanical latencies normally found in HDDs
    • P-100 and X-100 series
      2.5" SSDs (+)

      Features:

      42186.jpg
      • P-100 is a Parallel ATA (PATA) interface
      • X-100 is a Serial ATA (SATA) interface
      • P-100 is up to UDMA4, PI04, and multi-word DMA4
  • Cervoz Co., Ltd.  (1)
    • CIS-2SM310TLB256GS
      Cervoz Industrial 2.5� SATA SSD M310 family is a high capacity Solid State Disk product that is in compliance with the 2.5� form factor and SATA III standards. M310 family uses superior quality preselected multi-level cell (MLC) NAND flash memory from the industry leading manufacturer Toshiba. M310 family offers outstanding performance and reliability; the product family is a perfect solution for price sensitive semi-industrial and general industrial applications. (+)

      Features:

      318635964294816913.jpg
      • Compliant with SATA III 6.0Gb/s
      • MLC NAND flash memory
      • Capacity: 16GB ~ 256GB
  • Smart Modular Technologies  (2)
    • Rugged Xcel-200 SSD
      2.5" SATA solid state drive (SSD) (+)

      Features:

      185465378184183131.jpg
      • 500MB/s sequential read/write
      • up to 60K/40K random read/write IOPS
      • available in capacities ranging from 60 to 240GB
    • XceedUltra U100
      For embedded systems with 100 MBps sustained reads and 60 MBps sustained writes (+)

      Features:

      32906.jpg
      • The SATA interface, combined with onboard error detection and advanced management technologies, specifically supports data-intensive solid-state disk applications
      • It comes in 20 GB capacity and 40 GB [...]
  • Concurrent Technologies, Inc.  (5)
    • TR C4x/msd
      TR C4x/msd is a 3U VPX board featuring the Intel Xeon Processor D-1500 family and up to 32GB of DDR4 ECC DRAM for high performance embedded server applications. Concurrent Technologies variants based on 8, 12 and 16-core processors to suit application profiles. TR C4x/msd has four SATA600 interfaces for external drives plus two SATA600 connections for on-board solid state disk options. For high speed networking applications, two 10 Gigabit Ethernet data plane ports can be used either as a system ingress/egress point or for local data connectivity within the chassis. Two Gigabit Ethernet control plane ports are available on the backplane and two optional Gigabit Ethernet ports are available on the front panel of air cooled boards. TR C4x/msd can also provide up to x16 PCI Express lanes on the expansion plane of the backplane with a theoretical bandwidth of 15.6GB/s. These PCIe lanes enable point to point and small mesh configurations for high speed applications. (+)

      Features:

      346201173142513488.jpg
      • Intel® Xeon® processor D-1500 Family
      • Up to 32 Gbytes of DDR4 DRAM
      • On-board solid state drive (SSD) options
    • TR C4x/msd
      TR C4x/msd is a 3U VPX™ board featuring the Intel® Xeon® Processor D-1500 family and up to 32GB of DDR4 ECC DRAM for high performance embedded computing applications. Concurrent Technologies are supporting variants based on 8, 12 and 16-core processors to suit application profiles. TR C4x/msd has four SATA600 interfaces for external drives plus two SATA600 connections for on-board solid state disk options. For high speed networking applications, two 10 Gigabit Ethernet data plane ports could be used either as a system ingress/egress point or for local data connectivity within the chassis. Two Gigabit Ethernet control plane ports are available on the backplane and two optional Gigabit Ethernet ports are available on the front panel of air cooled boards.TR C4x/msd can also provide up to x16 PCI Express® (PCIe®) lanes on the expansion plane of the backplane with a theoretical bandwidth of 15.6GB/s. These PCIe lanes enable point to point and small mesh configurations for high speed applications without the use of an additional switch module. (+)

      Features:

      333161105142447798.jpg
      • Intel® Xeon® processor D-1500 Family
      • Up to 32 Gbytes of DDR4 DRAM
      • On-board solid state drive (SSD) options
    • XP B5x/msd
      XP B5x/msd is a new processor XMC module based on a 2-core Intel® Core™ i3-6102E processor with 8GB of DDR4 ECC DRAM to provide good performance with low power consumption. It includes an on-board Micro SSD, PCI Express® and a variety of user I/O including USB, SATA, Ethernet, RS232 and digital I/O (+)

      Features:

      338339397142415855.jpg
      • 6th generation Intel® Coreâ„¢ processor suitable for long life cycle deployments
      • Built in Solid State Drive for reliable storage
      • Wide range of I/O interfaces available on XMC connectors
    • E3-1500 v6
      AM G6x/msd customers will be able to specify a choice of processors including the Intel® Xeon® processor E3-1505M v6 or Intel® Xeon® processor E3-1505L v6. (+)

      Features:

      363521946861668284.jpg
      • These are both high performance 4-core devices with Intel® HD Graphics P630 and are optimized to create board variants with high compute performance or low power consumption respectively. AM G6x/msd has an on board 64GB Solid State Drive (SSD) for reliable Operating System and application storage.
      • For high speed mass storage, AM G6x/msd has two sites for M.2 storage modules based on PCI Express® M-key interconnects supporting the new Non-Volatile Memory Express® (NVMe) protocol which is optimized for solid state drive storage performance. AM G6x/msd is also the first board from Concurrent Technologies that has support for the future Intel® Optane range of 3D XPoint mo
      • A version will also be available offering dual 10 Gigabit Ethernet connectivity for higher speed networking with the ability to connect via either electrical or fibre links making it more suitable for use in remote locations. As with all other Concurrent Technologies products, AM G6x/msd is designed for long life-cycle applications. [...]
    • TR C4x/msd
      3U VPX Form Factor (+)

      Features:

      353924840861855914.jpg
      • Up to 16-cores and 32GB DDR4 memory for high performance applications
      • Optional 128GB SATA Flash module and 2.5-inch SSD for local storage
      • 2 x 10GBASE-KR data plane connectivity
  • DDRdrive LLC  (1)
    • DDRdrive X1
      A PCI Express expansion card based solid-state storage system. Singularly designed to target IOPS intensive applications while setting a new standard in performance, power, price (+)

      Features:

      41926.jpg
      • The DDRdrive X1 architecture integrates both DRAM and NAND to transform direct-attached enterprise storage
      • Both solid-state technologies work in concert to provide the superior characteristics of DRAM (speed, reliability,and longevity) with the non-volatility of NAND
      • 300,000+ Random Read IOPS
  • 4DSP  (1)
    • FM489
      Dual FPGA Virtex-5 & Virtex-4 based PMC-X/XMC Modular Multi-Purpose User Configurable: Memory, A/D, D/A, Solid-State Drive, Camera-Link, six JPEG2000 CODECs, and More (+)

      Features:

      43467.jpg
      • BLAST modules available: QDRII SRAM memory device: 1 x 2M x 32-bit (8 MB); DDR2 SDRAM memory device: 1 x 32M x 32-bit (128 MB); DDR3 SDRAM memory device: 2 x 64M x 16-bit (256 MB); ADV212 JPEG2000 compression devices: 2 CODECs; 32 GB NAND Flash (Solid State Drive)
      • High -peed DSP processing in Xilinx Virtex-5 FPGA
      • XC5VLX50T, XC5VLX85T, XC5VLX110T, XC5VSX50T or XC5VSX95T
  • PQI Europe  (1)
    • SATA DOM & 64GB SSD
      Industrial storage device (+)

      Features:

      32688.jpg
      • Maximum capacity of 64 GB on Turbo SATA SSD 2.5” drives
      • Compatible with SATA interface
      • No seek error and no noise
  • Artesyn Embedded Technologies  (9)
    • VPX3000
      Emerson’s VPX3000 is a convection cooled, fanless enclosure that accepts up to three 3U conduction cooled VPX modules. It includes a configurable I/O Adapter Board (IAB) that is designed to mate with 3U conduction cooled VPX modules, including Emerson’s iVPX7225 processor blade, itself based on the 3rd gen Intel Core mobile chipset. The IAB routes I/O from the payloads to the front of the enclosure and supports a range of I/O connectivity via suitable front panel connectors. VPX3000 includes a VITA-62 compliant power supply slot fitted with either an AC or DC power supply with a MIL-38999 connector power input connector. It has a full mesh backplane configuration for high bandwidth applications and includes integral solid state drive options for local application and data storage. Application areas include military, aerospace, commercial and other high performance embedded computing (HPEC) applications. FEATURES: Convection cooled, fanless enclosure for 3U conduction cooled VPX modules 3 Slot VITA 65 compliant backplane with full mesh data plane 1000BaseX control plane Supports conduction cooled 3U VPX modules Natural convection cooled enclosure with cold plate Customizable Interface Adapter Board (IAB) Built in SATA SSD option DC or AC power option [...] (+)

      Features:

    • Emerson VPX3000
      Emerson’s VPX3000 is a convection cooled, fanless enclosure that accepts up to three 3U conduction cooled VPX modules. It includes a configurable I/O Adapter Board (IAB) that is designed to mate with 3U conduction cooled VPX modules, including Emerson’s iVPX7225 processor blade, itself based on the 3rd gen Intel Core mobile chipset. The IAB routes I/O from the payloads to the front of the enclosure and supports a range of I/O connectivity via suitable front panel connectors. VPX3000 includes a VITA-62 compliant power supply slot fitted with either an AC or DC power supply with a MIL-38999 connector power input connector. It has a full mesh backplane configuration for high bandwidth applications and includes integral solid state drive options for local application and data storage. Application areas include military, aerospace, commercial and other high performance embedded computing (HPEC) applications. FEATURES: Convection cooled, fanless enclosure for 3U conduction cooled VPX modules 3 Slot VITA 65 compliant backplane with full mesh data plane 1000BaseX control plane Supports conduction cooled 3U VPX modules Natural convection cooled enclosure with cold plate Customizable Interface Adapter Board (IAB) Built in SATA SSD option DC or AC power option [...] (+)

      Features:

    • KR8 and MCASE series
      The KR8-315: Fanless embedded computer (+)

      Features:

      52909.jpg
      • Intel Atom E640 processor running at 1.0 GHz and 1GB DDR2 soldered RAM
      • Storage options include a 250GB SATA drive or 64GB Solid State Drive plus a MicroSD slot for storage expansion
      • A Mini PCI Express slot enables wireless LAN connectivity
    • KR8 and MCASE series
      The KR8-315: Fanless embedded computer (+)

      Features:

      52909.jpg
      • Intel Atom E640 processor running at 1.0 GHz and 1GB DDR2 soldered RAM
      • Storage options include a 250GB SATA drive or 64GB Solid State Drive plus a MicroSD slot for storage expansion
      • A Mini PCI Express slot enables wireless LAN connectivity
    • ATCA-7150
      High performance processor blade with SMP support (+)

      Features:

      34889.jpg
      • Two, 2.13 GHz Dual-Core Intel Xeon LV processors
      • Multiple software packages including operating systems
      • PICMG 3.0 base interface and PICMG 3.1 Option 1 fabric interface support
    • OpenVPX Boards
      The 6U iVPX7220 and 3U iVPX7223 boards feature the dual-core 2.20 GHz Intel(r) Core(tm) i7 2655LE processor with integrated graphics and memory controller, and the Intel(r) QM67 PCH chipset for advanced I/O functionality (+)

      Features:

      47463.jpg
      • The iVPX7220 also supports the quad-core 2nd generation Intel Core i7 2715QE processor
      • Both of the products are rugged SBCs for extreme environments with extended shock, vibration and temperature ratings, and conduction cooling
      • The iVPX7220 also offers 4GB of embedded USB flash and 256KB of non-volatile Ferroelectric Random Access Memory (F-RAM)
    • OpenVPX Boards
      The 6U iVPX7220 and 3U iVPX7223 boards feature the dual-core 2.20 GHz Intel(r) Core(tm) i7 2655LE processor with integrated graphics and memory controller, and the Intel(r) QM67 PCH chipset for advanced I/O functionality (+)

      Features:

      47463.jpg
      • The iVPX7220 also supports the quad-core 2nd generation Intel Core i7 2715QE processor
      • Both of the products are rugged SBCs for extreme environments with extended shock, vibration and temperature ratings, and conduction cooling
      • The iVPX7220 also offers 4GB of embedded USB flash and 256KB of non-volatile Ferroelectric Random Access Memory (F-RAM)
    • ATCA-7350
      High-performance processor blade with SMP support (+)

      Features:

      37855.jpg
      • Two, Quad-Core Intel Xeon (2.13 GHz) LV processors
      • Up to 32 GB main memory
      • Multiple software packages including operating system
    • KR8-820
      The Emerson Network Power KR8-820 features the 2nd generation Intel(r) Core(tm) i5-2510E dual-core processor running at 2.5 GHz to provide a significantly improved power/performance ratio over previous generation processors for both general and graphics processing. Featuring 4GB DDR3 memory and an 80GB solid state drive in a robust metal enclosure, the KR8-820 has no moving parts to ensure long-term reliability. It is fully Intel(r) vPro(tm) certified, providing robust security and remote management capability for trouble-free deployment. Measuring just 200 mm x 250 mm x 70 mm (7.87 x 9.84 x 2.76 inches), the KR8-820 can be wall mounted or mounted within a larger cabinet or kiosk for operation in an environment of zero to 35 degrees Celsius. (+)

      Features:

      • .
      • .
      • .
  • HABEY USA  (2)
    • BIS-6625-IV
      BIS-6625 ultra-compact Atom E600 fanless PC is getting more connected than ever (+)

      Features:

      190296590962479819.jpg
      • Ultra-compact for space-constrained applications
      • 3 mini-PCI express expansion slot for 3G/4G cards, WiFi, and other expansions
      • 2 SIM slots for multiple carriers and redundant connectivity
    • EPC - 6566
      1U short-depth barebone server (+)

      Features:

      • Developed around Intel power-efficient Atom D525 processor
      • 1.75-inchheight 19-inch rack-mountable platform
      • 1.8 GHz Intel D525 processor
  • Agrade  (1)
    • 1.8" Slim SATAII
      1.8" Slim SATAII SSD of JEDEC SFF-8156 (MO-297A) (+)

      Features:

      43803.jpg
      • The connector is 22 pin
      • Dimension 39 x 54 x 4.5 mm
      • MO-297 defines the dimensions, layout and connector position for 54 mm x 39 mm solid state drives with a standard SATA connector
  • GridIron Systems  (1)
    • OneAppliance
      SSD-based appliances for accelerating Big Data analytics (+)

      Features:

      201007919158763943.jpg
      • Extreme IOPS
      • Extreme bandwidth
      • High capacity [...]
  • Megatel Computer Corporation  (1)
    • PCpe
      Low power socket 7 processor up to 266MHz (+)

      Features:

      • 32 to 256 MB SDRAM (soldered) Asiliant (Chips & Tech) advanced 690x0 CRT and flat panel PCI display controller, 2 to 4 MB of fast on-chip video DRAM
      • One USB 2.0 (full speed) port
      • Three 16C550 RS232 serial ports supporting up to 230 K baud (one port may be RS485)
  • Extreme Engineering Solutions (X-ES)  (6)
    • XPort6175
      The XPort6175 supports two, rugged or commercial, 2.5 in. Solid-State Drives (SSDs) in a single 1.0 in. 3U VPX slot. The XPort6175’s design mitigates life cycle issues that plague other flash-based storage solutions. The XPort6175 supports a x2 PCI Express Gen2 interface to the backplane for flexible system connectivity options. Standard configurations of up to 4 TB are available. The XPort6175 supports several predefined configurations utilizing both commercial-grade and rugged Solid-State Drives (SSDs). (+)

      Features:

      3720714110228372149.jpg
      • 3U VPX (VITA 46) module
      • Supports up to two 2.5 in. Solid-State Drives (SSDs)
      • Supports rugged or commercial Solid-State Drives (SSDs)
    • XPand6103 Rugged and Compact Intel Core i7 Based Fanless Embedded Box
      The XPand6103 is a rugged and compact fanless embedded box PC utilizing the Intel Core i7 Processor. The XPand6103 provides a reliable and maintenance free, high performance computing platform ideally suited for environmentally challenging and space constrained situations. It was specifically designed for rugged yet processing intensive Industrial PC (IPC), vehicle, and rail transportation applications, and provides an optimal solution for demanding autonomous vehicle computing requirements. The XPand6103 supports the 3rd generation Intel Core i7 processor by integrating the XPedite7450 rugged COM Express module. The internal 64 GB Slim SATA SSD memory module combines the convenience of high capacity off-the-shelf storage with the reliability of solid state non-volatile memory. The standard configuration includes DisplayPort++ video, two Gigabit Ethernet, USB, four CAN Bus, and RS-232/422 ports. The system can also be configured to provide up to two 10 Gigabit Ethernet 10GBASE-T interfaces. With three internal PCI Express Mini Card slots and support for two external antennae, the XPand6103 can offer a flexible array of additional I/O options, including WLAN, cellular, and GPS. The XPand6103 supports a wide input voltage range and complies to the power specifications of SAE J1455, EN50155, ISO-7637-2, MIL-STD-1275, and MIL-STD-704. Through the implementation of an environmentally sealed and completely rugged design, the XPand6103 can operate under the most demanding IEC61373, EN50155, and MIL-STD-810 shock and vibration requirements, as well as the water-immersion requirements of IP67. The XPand6103 also supports operating temperatures from -40°C to +70°C ambient. FEATURES: 3rd generation Intel® Core™ i7 processor Fanless embedded box PC Extremely rugged and reliable design Compact and maintenance-free IP67-compliant Supports a wide voltage range for input power Rugged M12 I/O connectors Gigabit Ethernet CAN Bus DisplayPort++ video USB 2.0 RS-232/422 serial PCI Express Mini Card expansion slots Optional 10GBASE-T 10 Gigabit Ethernet -40°C to +70°C operating temperature Designed for rugged high performance Industrial PC (IPC) and transportation applications Ideal computing platform for autonomous vehicles [...] (+)

      Features:

    • XPort6170
      3U VPX removable SATA Solid State Drive (SSD) solution (+)

      Features:

      41990.jpg
      • Module carrier fits within a standard 3U VPX slot
      • SATA backplane interface over P1
      • -40 °C to +85 °C operating temperature range
    • XPort6105
      The XPort6105 is a secure self-encrypting drive (SED) / Solid-State Drive (SSD) XMC module that provides up to 512 GB of storage. The XPort6105's security features include AES-256 XTS encryption, where the encryption key can be purged in less than 30 ms, leaving no remnants of the key behind. In addition, the XPort6105 supports several military sanitization protocols, including a fast clear. All of the sanitization protocols can be invoked via software or hardware discretes. (+)

      Features:

      293958685022849252.jpg
      • Up to 512 GB capacity
      • Hardware AES-256 encryption with XTS BCM
      • Ideal for Anti-Tamper (AT) and Information Assurance (IA) requirements
    • XPort6102
      XMC Solid State Drive (SSD) Solution (+)

      Features:

      42830.jpg
      • XMC PCIe x1 interface
      • Up to 160 GB capacity
      • Five internal SATA controllers for maximum bandwidth
    • XPort6192
      Small Form Factor 256 GB Removable SATA Solid State Drive (SSD) with 256-bit Encryption (+)

      Features:

      46674.jpg
      • Fits within a standard 3U 0.8" pitch slot
      • -40 °C to 85 °C operating temperature range
      • Hot swappable capabilities possible in some configurations
  • WinSystems, Inc.  (9)
    • PCM-SSD
      A PC/104 module with 2 Mbytes of solid state disk capacity (+)

      Features:

      • Four sockets support RAMs, EPROMs, and Flash
      • Software "Write Protect"
      • Power-on boot support
    • PPM-520
      A PC-compatible, PC/104-Plus SBC for thin-client and other network-enabled applications (+)

      Features:

      • Three PC/104 modules on a single card
      • 133-MHz operation
      • 256 Mbytes of SDRAM using SODIMM
    • PC/104-Plus Single Board Computers
      Pentium 5x86, 486DX, or 386SX CPUs (+)

      Features:

      • PC-compatible platform supports Windows, Linux, and other operating systems
      • Two to four COM ports
      • Bidirectional LPT ports
    • PPM-TX and PPM-520
      PC/104-Plus feature-rich SBCs (+)

      Features:

      • Pentium and 5x86 CPUs
      • PC-compatible platform supports Windows, Linux, and other OSs
      • Two to four COM ports
    • PC/104 Extended Temp SBCs
      AMD 520 or 386SX CPUs (+)

      Features:

      20937.jpg
      • PC-compatible platform supports Windows, Linux, and other real-time operating systems
      • Solid State Disk socket for up to 1 GB device
      • Two to four COM ports and LPT port
    • EBC-LP
      An EBX-compatible single board computer (+)

      Features:

      • Intel Tillamook processor at 166 MHz
      • Onboard PCI video controller with 2 Mbytes of video RAM; drives both DRT monitors and flat panels simultaneously
      • 10/100Base-T Ethernet controller
    • LBC-586Plus
      PC-compatible, Pentium-based, network single board computer, 146 mm x 203 mm (+)

      Features:

      • Up to 32 Mbytes of installable system DRAM; optional 256 Kbytes level 2 cache
      • Provides CPU with core logic functions, video controller with CRT and flat panel support, Ethernet controller, 4 serial channels, 48 bidirectional digital I/O lines and solid state disk support
      • 16-bit PC/104 connector supports additional expansion modules
    • SAT-520Plus
      A PC/104-Plus single board computer (+)

      Features:

      • AMD SC520 processor at 133 MHz
      • Up to 256 Mbytes of SDRAM using SODIMM
      • Solid-state disk socket with support for up to 512 Mbytes bootable DiskOnChip
    • MCM-DXS
      A 133 MHz AMD 586 CPU IEEE 961 STD Bus form factor (+)

      Features:

      • 4.5-inch x 6.5-inch
      • 16 Kbytes of cache
      • 32 Mbytes of EDO DRAM soldered directly to the board
  • Super Talent Technologies  (1)
    • Solid State Drives
      Rugged SATA and IDE SSD Drives (+)

      Features:

      35158.jpg
      • Read/Write speeds upwards of 60/45 MBps, 0.1 ms access time
      • Shock and vibration resistant, and support broad operating temperature ranges
      • Fully compatible with standard SATA hard drives
  • Critical I/O  (1)
    • Removable 3U VPX Solid State Storage StorePakâ„¢
      StorePakâ„¢ - is a single slot 3U VPX solid state storage blade with a removable SSD (solid state drive) storage module which is ideal for high bandwidth rugged applications where high speed data recording, file serving or direct attached storage is essential. The StorePakâ„¢ removable drive module is specifically designed for easy removal and replacement of the storage media. Advanced design and full featured software allow multiple StorePaks to work together to scale capacity and performance as necessary to meet your embedded storage requirements. FEATURES: High Density - up to 6 TB per StorePak High Performance - up to 2.2 GBytes/s per StorePak Removable Solid State Storage Module Small SWAP footprint 3U VPX air-cooled or conduction cooled form factor Scalable in Capacity & Bandwidth Multi-Function: Recorder, File Server, direct attached storage Optional AES full drive encryption [...] (+)

      Features:

  • msystems  (5)
    • mSSD UATA 2.5"
      msystems' mSSD (formerly Fast Flash Disk - FFD) Ultra ATA 2.5" Flash Disk is a state-of-the-art solid-state disk, based on NAND flash technology, that provides the functionality of a hard disk with no moving parts (+)

      Features:

      30628.jpg
      • Suitable rugged storage solution for mission-critical applications that must operate under harsh environmental conditions
      • 1 GB to 128 GB disk capacity
      • 2.5" standard form factor
    • mSSD SATA 2.5"
      Formerly Fast Flash Disk (FFD) 2.5" Serial ATA (+)

      Features:

      30625.jpg
      • Solid-state disk, based on NAND flash technology, that provides the functionality of a hard disk with no moving parts
      • A suitable, reliable storage solution for telecommunication and blade servers industry that must support 99.999% availability and comply with NEBS Level 3
      • 1 GB to 128 GB disk capacity
    • FFD Ultra Narrow SCSI
      A 3.5”, solid-state disk with no moving parts (+)

      Features:

      • Available in capacities ranging from 512 Mbytes to 35 Gbytes
      • Complies with SCSI-2 and SCSI-3 standards
      • Provides sustained read/write performance of 17 Mbytes/sec and 11.5 Mbytes/sec respectively
    • mSSD IDE4K 2.5"
      msystems' mSSD 4K 1.8" and 2.5" (formerly IDE 4000) solid-state flash disk with no moving parts (+)

      Features:

      • The IDE 4K provides capacities up to 8192 MB (8 GB) with improved cost structure while supporting both PIO and DMA transfer modes
      • Designed for telecommunication, public safety, military, aerospace, and point of sale systems, the IDE 4K is a true drop-in replacement for rotating disks where top reliability is required while maintaining affordable cost
      • Cost-effective flash disk
    • mSSD U320 SCSI 3.5"
      A state-of-the-art Solid-State Ultra320 SCSI disk (formerly FFD 3.5" Ultra320 SCSI) based on flash technology (+)

      Features:

      • Fully compatible with the SCSI-2 and SCSI-3 interfaces
      • Design eliminates seek time, latency, and other electromechanical delays inherent in conventional disk drives
      • 1 GB to 352 GB capacity
  • Memoright Memoritech (Shenzhen) Co.,Ltd.  (2)
    • MR25.1-032S
      Solid state disk (+)

      Features:

      • Storage media: Nand Flash
      • Sequential read speed > 100 MBps sequential write speed > 100 MBps
      • Random read IOPS at 512 bytes > 10000 random write IOPS at 512 bytes > 800
    • Military Grade SSD and IPC Storage Solution
      Ruggedized Series SSD: (+)

      Features:

      • Wide Temperature (-40 °C ~ +85 °C) & SLC NAND Type
      • Constant Speed
      • Form Factor: 2.5"/1.8"; Interface: SATA/PATA
  • Curtiss-Wright  (9)
    • FSM-C 3U VPX Flash Storage Module Carrier
      The Flash Storage Module Carrier provides rugged, removable storage with the flexibility of industry standard solid state storage (SSD). The FSM-C SSD Carrier is VITA 48.2 compliant in a 1� pitch 3U VPX industry standard format. The FSM-C can lower schedule and technical risk for embedded storage applications providing a COTS storage solution. FEATURES: 3U VPX Solid State Storage Carrier (VITA 48.2 compliant) Flexible Storage Sizes: 128GB to 1 TB capacity (2.5" SATA SSD) Flexible Storage Types: MLC, eMLC & SLC Flash versions Fast erase & MIL secure erase Single SATA lane to VPX connector Tool-less removable storage [...] (+)

      Features:

    • Parvus DuraCOR XD1500
      The Parvus DuraCOR XD1500 from Curtiss-Wright is a rugged Commercial Off-the-Shelf (COTS), small form factor, modular mission computer server based on the industrial-temp, 12-core, 64-bit Intel Xeon D-1559 (formerly Broadwell-DE) SoC processor. With support for up to 128 GB of DDR-4 RAM memory and integrated 10GBase-T Ethernet, the XD1500 has been optimally designed for size, weight, and power-sensitive airborne, ground vehicle, UAS, ISR and sensor platforms seeking datacenter-class performance at the network edge. It combines powerful high core-count, floating-point processing with the highest capacity memory architecture available in a rugged embedded system, with incredible I/O and data storage scalability. Supporting an add-on rugged COTS XMC co-processor or I/O module and multiple Mini-PCIe I/O modules for mission-specific avionics/vetronics payload interfaces, the system can be configured with mission-tailored capabilities for C4ISR command and control, image processing, surveillance, virtual machine hypervisor, datacenter server processing, or network functional virtualization  applications in harsh deployed environments. Multiple, ultra-fast Non-Volatile Memory Express (NVMe)-based and SATA3-based solid state disk Flash disk options are available for support of high-capacity removable and/or fixed Flash disk storage, information assurance and operational requirements for encryption, zeorization, and/or high mating cycle SATA interfaces. (+)

      Features:

      3915722442124490908.jpg
      • 12-core Intel Xeon Processor-D SoC (D-1559) with up to 128 GB RAM memory
      • High-speed VITA 76 connectors for optimized high-speed signal integrity
      • 10Gbase-T Ethernet and USB 3.0 ports
    • Vortex VR-6511S8
      6U VME/VXS (VITA 41) Multichannel Data Recorder with Solid State storage (+)

      Features:

      46345.jpg
      • Compact Rugged Data Recorder with up to 2TB of SSD capacity
      • VXS/VITA 41 recording and playback system
      • Embedded storage using 6U VXS Quad 2.5” SATA solid state or rotating hard disk drive storage
    • XMC-554 2TB NAND SATA Drive
      The XMC-554 rugged, high performance, reliable and power-efficient NAND flash solid state drive solution does not have any moving parts. This provides significantly lower power consumption and an order of magnitude improvement in reliability in environments with vibration and contaminants, compared to traditional rotating hard disk drives (HDD). Also important is the clear performance advantage, due to the lower latency and higher data transfer rates. This translates to enormous benefits in regular operating conditions and more critically, in high-risk combat environments. (+)

      Features:

      • 2TB NAND SATA Drive
      • ECC, wear leveling and bad block management
      • Boot drive support
    • DuraCOR 810-Duo MIL-COTS Rugged Vehicle Mission Computer
      The Parvus DuraCOR® 810-Duo is a rugged multi-core mission processor subsystem designed for high reliability applications requiring MIL-STD-810G environmental compliance with extreme temperatures, shock/vibration, and ingress. Based on a modular, open architecture COTS design with an Intel Core2 Duo CPU, solid state disk, MIL-704/1275 power supply and conduction cooled chassis, the DuraCOR 810-Duo is an ideal computing solution for harsh mobile military and homeland security C4ISR deployments. - See more at: www.curtisswrightds.com/products/subsystems/mission-computers/parvus-duracor-810-duo-mission-computer.html#sthash.PfW4PeRQ.dpuf FEATURES: MIL-COTS Rugged Vehicle Mission Computer Platform with Core2 Duo CPU: Low-Power 1.5GHz Intel Core 2 Duo Operating Systems: Linux / Windows OS to boot-up out of box and Wind River VxWorks Board Support Package (BSP) RTOS Support Available Supports Two IDE CompactFlash and/or SATA Solid State Disks, including external eSATA Device Removable CF Media Option Eases Secure Data Transfer and System Software Updates Connectivity & I/O including: 1x Gigabit Ethernet, 1x Fast Ethernet, 6x USB, 2x RS-232 Serial, 1x LVDS Video, 1x VGA Video, PS/2 Mouse/Keyboard, Audio [...] (+)

      Features:

    • VRD1-CC Video switch/recorder/distributi
      The new VRD1-CC integrates switching, recording and network distribution of High Definition (HD) video for aerospace and defense platforms in a single compact rugged unit. The VRD1-CC is the industry’s first video management system (VMS) to deliver comprehensive functionality, that previously required multiple or expensive customized systems, in a single unit optimized for SWaP-C constrained platforms. The VRD1-CC speeds and simplifies the integration of HD VMS for military applications deployed in harsh environments, such as vetronics and avionics. (+)

      Features:

      197053535322680850.jpg
      • Eighteen (18) video inputs with switching, scaling and windowing
      • Twelve (12) video outputs
      • MPEG4 H.264 video compression and decompression
    • Vortex CNS
      The Vortex Compact Network Storage (CNS) is a conduction-cooled efficient network file storage device that uses less CPU and I/O power than conventional network file servers (+)

      Features:

      46347.jpg
      • 512GB of storage on solid-state drives through four 1GbE connections
      • CIFS, NFS, HTTP and FTP protocols
      • AES-256 Data encryption capability
    • DuraWORX 10-10 Rugged Multi-function Computing & Networking Subsystem
      The Parvus DuraWORX® 10-10 is an ultra-rugged multi-function computing and networking system that combines a high performance Intel Core i7-based mission processor and a Cisco 5915 IOS-managed secure network router into a single modular platform designed for extended temperature, high shock & vibration environments. Integrating the capabilities of Curtiss-Wright's DuraCOR 80-40 computer and DuraMAR 5915 router subsystems together with options for DuraNET Ethernet switching and PCIe104 I/O card expansion, the DuraWORX 10-10 is a scalable, all-in-one computing appliance aimed at reducing Size, Weight & Power (SWaP) and simplifying systems integration (thermal, cabling, power, installation) in tactical computing, IP networking and situational awareness applications. DuraWORX capabilities enable functional subsystem consolidation and reduction in the number of Line Replaceable Units (LRUs). FEATURES: Combined High Performance Rugged Multi-core x86 Computer and IP Network Router System CPU: Intel Core i7 Processor, 2.2 GHz, Dual-Core, 8 GB DRAM, Integrated GPU Cisco 5915 IOS-Managed Router with Enterprise IOS Software for Robust Security, Management, QoS, VLAN, IPv4 / IPv6 Routing, IP Mobility Connectivity & I/O: Gigabit Ethernet LAN Interface, 6x USB 2.0, 2x RS-232 Serial, 16x Discrete DIO, VGA & HDMI Video, Stereo Audio, PS2 Storage: Dual Slots for Removable 2.5’’ SATA Solid State Disks Expandable: Modular Interlocking Chassis Design Supports Stackable PCIe104 I/O Card Expansion for High Speed Interconnect (2-3 Card Slots Per Expansion Chassis Segment, i.e. MIL-STD-1553/429, DIO, FPGA, Frame Grabber) [...] (+)

      Features:

    • Parvus DuraWORX 10-10 Rugged Multi-function Computing & Networking Subsystem
      The Parvus DuraWORX® 10-10 is an ultra-rugged multi-function computing and networking system that combines a high performance Intel Core i7-based mission processor and a Cisco 5915 IOS-managed secure network router into a single modular platform designed for extended temperature, high shock & vibration environments. Integrating the capabilities of Curtiss-Wright's DuraCOR 80-40 computer and DuraMAR 5915 router subsystems together with options for DuraNET Ethernet switching and PCIe104 I/O card expansion, the DuraWORX 10-10 is a scalable, all-in-one computing appliance aimed at reducing Size, Weight & Power (SWaP) and simplifying systems integration (thermal, cabling, power, installation) in tactical computing, IP networking and situational awareness applications. DuraWORX capabilities enable functional subsystem consolidation and reduction in the number of Line Replaceable Units (LRUs). FEATURES: Combined High Performance Rugged Multi-core x86 Computer and IP Network Router System CPU: Intel Core i7 Processor, 2.2 GHz, Dual-Core, 8 GB DRAM, Integrated GPU Cisco 5915 IOS-Managed Router with Enterprise IOS Software for Robust Security, Management, QoS, VLAN, IPv4 / IPv6 Routing, IP Mobility Connectivity & I/O: Gigabit Ethernet LAN Interface, 6x USB 2.0, 2x RS-232 Serial, 16x Discrete DIO, VGA & HDMI Video, Stereo Audio, PS2 Storage: Dual Slots for Removable 2.5’’ SATA Solid State Disks Expandable: Modular Interlocking Chassis Design Supports Stackable PCIe104 I/O Card Expansion for High Speed Interconnect (2-3 Card Slots Per Expansion Chassis Segment, i.e. MIL-STD-1553/429, DIO, FPGA, Frame Grabber) [...] (+)

      Features:

  • PQI Corporation  (2)
    • 2.5"/1.8" 128GB SSD
      2.5"/1.8" SATA 128 GB Solid State Disk (+)

      Features:

      • SLC/MLC flash IC technology
      • SATA II, IDE, and ZIF interface
      • Wide temperature range: -40 °C to +85 °C
    • Turbo SATA2.5" SSD
      Compatible with SATA interface (+)

      Features:

      33097.jpg
      • No seek error and no noise
      • Low power consumption
      • No latency delay
  • Pi 2 Design  (1)
    • CSB502SSD - Solid State Drive Shield
      The CSB502SSD Multi-Function Solid State Drive shield allows users to create a low cost, high performance, embedded network storage device. The powerful combination of the CSB502SSD and the Raspberry Pi 2 lets you leverage the ever expanding RPi 2 ecosystem for a wide variety of Embedded, Data Storage, Medical and Industrial applications. (+)

      Features:

      323674122652955934.jpg
      • Up to 1TB of SSD storage
      • built in WiFi (802.11b/g/n)
      • RTC Battery back up
  • Sealevel Systems, Inc.  (3)
    • COM Express QuickStart Kit, 1.8GHz Intel
      The 121004-KT provides everything you need to get your COM Express project off to a fast start. Powered by a 1.8GHz Intel Atom N2800 CPU with 4GB RAM and integrated heatsink, the QuickStart kit includes an installed 2.5" 32GB SATA solid-state disk. Standard features include five USB 2.0, two RS-232, one RS-485, dual Gigabit Ethernet, SATA, DisplayPort and audio interfaces. To interface the RS-485 port, a 10-pin IDC to DB9M serial cable is included. The carrier board and module are powered by the included 100-240VAC to 24VDC external power supply with US power cord. (+)

      Features:

      247928028961498262.jpg
      • Sealevel COM Express Carrier Board (Item# 12000)
      • Type 6 COM Express Module w/ 1.8GHz Intel Atom and Heatsink (Item# TCA/N2800)
      • 4GB DDR3 1066MHz 204-Pin SODIMM (Installed on COM Express module)
    • Relio R2000
      A ruggedized industrial computer designed for use in harsh environments (+)

      Features:

      30402.jpg
      • Up to a 1.4GHz Intel Pentium M processor
      • Fanless operation possible to 50 °C
      • Dual 10/100BASE-T Ethernet, two RS-232/422/485 serial ports, and two USB 2.0 ports
    • eI/O M-Series
      A series of embedded I/O modules (+)

      Features:

      • eI/O products achieve expansion in groups of eight inputs or eight outputs per module
      • Allows user to mix and match modules providing relay, opto-isolated in/out, A/D, D/A, and other commonly used I/O as appropriate to create a customized embedded I/O subsystem
      • Interfacing to the eI/O modules is accomplished via a 50-pin cable interface (PB24/32) compatible with a number of bus-based controllers
  • General Micro Systems, Inc.  (2)
    • Mini BlackBox CCStore5
      Rugged, expandable, 3U CompactPCI storage module with real-time encryption (+)

      Features:

      • Up to 200 GB of Hard Disk Drive (HDD) or up to 12 8GB of Solid State Disk (SSD
      • Up to 32 GB of CompactFlash for low-cost Solid State storage
      • Over 100 MBps transfer rates using SSD in Stripe mode
    • CCStore3 BlackBox
      Rugged, Expandable, CompactPCI storage module with real-time encryption (+)

      Features:

      • Up to 750 GB of Hard Disk Drive (HDD) or up to 384 GB of Solid State Disk (SSD) or up to 240 GB of Rugged Hard Disk Drive (RHDD)
      • Over 100 MBps transfer rates using SSD/HDD in Stripe mode
      • Over Current Protection (OCP) for each drive
12/6/21 14:50
Close

Subscribe to Analog updates