Analog

Showing results for: analog circuit
Refine Analog companies and products:
analog analogue analog circuit analog ic analogue circuit analogue ic analog to digital digital to analog a/d d/a adc dac continuous signal
Click on any vendor
to see a listing of
analog circuit related products.
  • National Semiconductor  (2)
    • ADC10D1000
      16-bit ADC and DVGA (+)

      Features:

      • Enable a new class of multi-carrier GSM and multi-carrier, multi-standard wireless base stations
      • Spurious-Free DynamicRange (SFDR) performance with 90.6 decibels full scale (dBFS) for a 160 MHz input frequency, and 87 dBFS guaranteed
      • ADC provides unmatched high-order harmonic distortion performance at any input frequency
    • ADC12040
      A monolithic CMOS analog-to-digital converter (+)

      Features:

      • Converts analog input signals into 12-bit digital words at a minimum of 40 MSPS
      • Uses a differential, pipelined architecture with digital error correction and an on-chip sample-and-hold circuit to minimize die size and power consumption
      • Operates on a single 5V power supply
  • Digilent Inc.  (3)
    • Cmod A7 Breadboardable Artix-7 FPGA Module
      The Digilent Cmod A7 is perfect for rapid prototyping. The small, breadboard friendly 48-pin DIP form factor makes it easy to embed into a small project. It is built around a Xilinx Artix-7 FPGA. We offer two flavors - Cmod A7-15T and Cmod A7-35T. The only difference between the Cmod A7-15T and Cmod A7-35T is the capabilities of the FPGA found on the board. There are 44 Digital FPGA I/O signals and two FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit (+)

      Features:

      345654902591879266.jpg
      • XC7A15T-1CPG236C for A15T / XC7A35T-1CPG236C for A35
      • 48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V)
      • USB-JTAG Programming Circuitry
    • Basys
      Circuit design platform for anyone who wants to learn about FPGAs and digital circuit design (+)

      Features:

      38301.jpg
      • Xilinx Spartan3-E FPGA, 100K, or 250K gate featuring 18-bit multipliers, 72 Kb of fast dual-port block RAM, and 500 MHz+ operation
      • USB 2 port for FPGA configuration and data transfers (software available as a free download)
      • XCF02 platform flash ROM that stores FPGA configurations indefinitely
    • Atlys
      The Atlys circuit board is a complete, ready-to-use digital circuit development platform based on a Xilinx Spartan 6 LX45 FPGA. The on-board collection of high-end peripherals, including Gbit Ethernet, HDMI Video, 128Mbyte DDR2 memory array, audio and USB ports make the Atlys board an ideal host for complete digital systems built around embedded processors like Xilinx’s MicroBlaze. Atlys is fully compatible with all Xilinx CAD tools, including ChipScope, EDK, and the free WebPack, so designs can be completed with no extra costs. (+)

      Features:

      184976822216982413.jpg
      • Xilinx Spartan-6 LX45 FPGA, 324-pin BGA package
      • 128Mbyte DDR2 16-bit wide data
      • 10/100/1000 Ethernet PHY
  • Nallatech  (4)
    • XMC-240
      FPGA processing and analog input PMC/XMC mezzanine (+)

      Features:

      42876.jpg
      • Designed to meet the signal processing needs of modern signal intelligence, software defined radio and radar applications
      • The XMC-240 is the latest product to be introduced to the highly successful Nallatech REVX Series of rugged embedded processing solutions
      • The XMC-240 features four channels of analog input that can sample analog signals at up to 250 MSPS with 14 bits resolution
    • BenADC-V4
      Virtex-4/Quad 250 MSps Analog Capture Module (+)

      Features:

      31733.jpg
      • Suitable for applications requiring high-speed analog capture and the on-board FPGA
      • Combining an Xilinx Virtex-4 SX or LX FPGA, four high speed analog capture channels, and two banks of DDR-II SRAM, the module provides processing, analog I/O, and memory expansion capability
      • The high density of processing and analog capture enables systems to be implemented in less space and makes design implementation easier
    • BenADDA-V4
      Virtex-4, Dual 105 MSps ADC, Dual 160 MSps DAC DIME-II Module (+)

      Features:

      31732.jpg
      • Suited for applications requiring high-speed analog capture and the processing performance of an on-board FPGA
      • Combining an Xilinx Virtex-4 SX or LX FPGA, two analog input channels, two analog output channels, and two banks of DDR-II SRAM, the module provides processing, analog I/O, and memory expansion capability
      • The direct coupling and high density coupling of processing, memory in less space makes design implementation easier [...]
    • xmc-240
      The XMC-240 features four channels of analog input that can sample analog signals at up to 250 MSPS with 14 bit resolution (+)

      Features:

      • These are coupled directly to a Xilinx Virtex-5 SX95T FPGA for the implementation of high-performance DSP applications to process the data captured from the A/D converters
      • The XMC-240 has comprehensive clock management capabilities and offers either on-board clocking or external clock input
      • Supported by comprehensive Development Kits for both Linux and Wind River Vx Works
  • MicroTech International Ltd.  (1)
    • Extremely Fast DSP FPGA Board
      Signal processing modules with a matrix of Xilinx Virtex II 3000 series FPGA circuits (+)

      Features:

      21629.jpg
      • 6U x 160 mm EUROCARD mechanical standard
      • Connects to a wide array of control devices using VMEbus
      • Available computational complexity of system: 975 million complex multiplication operations per second
  • Adas Electronique  (1)
    • CPCI 150
      32 differential inputs or 64 single-wire inputs (+)

      Features:

      • High accuracy, low drift
      • Fast protected multiplexers
      • Software programmable gain 1 to 8 in 2 n
  • esd gmbh  (1)
    • AMC-ADIO24
      The AMC-ADIO24 is equipped with a Spartan FPGA that manages the I/O data exchange in cooperation with the PCIe bridge. FIFOs for input and output direction and DMA to the PCIe host CPU’s memory minimizes undesired latency during PCIe read cycles at higher data rates. Read cycles of the PCIe CPU are reduced to setup and diagnosis tasks. The eight over voltage protected analog inputs are connected to eight 16 bit A/D converters with a sampling rate of up to 200 kHz each. Both 16 bit analog outputs have a differential and a single ended output circuit, accessible at separate pins at a Harting® har-link® connector. The outputs are transient and short circuit protected. Each of the 24 TTL-level I/Os can be separately configured as input or output. The outputs can be configured as high side driver, low side driver or both (sink/source). The I/O port’s state can be read back in any configuration via a comparator with hysteresis. The firmware offers a so called ‘Timing-Routing-Pool’ with various trigger conditions (RS-485 trigger input, timer, software, free flow) that can be individually evaluated for each I/O. For setup and I/O data exchange a comprehensive register description is available (+)

      Features:

      184747129891822071.jpg
      • 8 analog inputs ±10 V, 16 bit
      • 2 analog outputs ±10 V, 16 bit
      • 24 digital I/Os, TTL level
  • Digilent Inc.  (3)
    • Cmod A7 Breadboardable Artix-7 FPGA Module
      The Digilent Cmod A7 is perfect for rapid prototyping. The small, breadboard friendly 48-pin DIP form factor makes it easy to embed into a small project. It is built around a Xilinx Artix-7 FPGA. We offer two flavors - Cmod A7-15T and Cmod A7-35T. The only difference between the Cmod A7-15T and Cmod A7-35T is the capabilities of the FPGA found on the board. There are 44 Digital FPGA I/O signals and two FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit (+)

      Features:

      345654902591879266.jpg
      • XC7A15T-1CPG236C for A15T / XC7A35T-1CPG236C for A35
      • 48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V)
      • USB-JTAG Programming Circuitry
    • Basys
      Circuit design platform for anyone who wants to learn about FPGAs and digital circuit design (+)

      Features:

      38301.jpg
      • Xilinx Spartan3-E FPGA, 100K, or 250K gate featuring 18-bit multipliers, 72 Kb of fast dual-port block RAM, and 500 MHz+ operation
      • USB 2 port for FPGA configuration and data transfers (software available as a free download)
      • XCF02 platform flash ROM that stores FPGA configurations indefinitely
    • Atlys
      The Atlys circuit board is a complete, ready-to-use digital circuit development platform based on a Xilinx Spartan 6 LX45 FPGA. The on-board collection of high-end peripherals, including Gbit Ethernet, HDMI Video, 128Mbyte DDR2 memory array, audio and USB ports make the Atlys board an ideal host for complete digital systems built around embedded processors like Xilinx’s MicroBlaze. Atlys is fully compatible with all Xilinx CAD tools, including ChipScope, EDK, and the free WebPack, so designs can be completed with no extra costs. (+)

      Features:

      184976822216982413.jpg
      • Xilinx Spartan-6 LX45 FPGA, 324-pin BGA package
      • 128Mbyte DDR2 16-bit wide data
      • 10/100/1000 Ethernet PHY
  • Aeroflex  (1)
    • Aeroflex Microelectronic Solutions
      Digital, Analog, Power, RFMW, and Motion Solutions for HiRel Applications (+)

      Features:

      • Serving worldwide customers with HiRel standard products
      • LEON 3FT IP and Î?Processors
      • Memories, SpaceWire
  • ASSET InterTech  (1)
    • ScanWorks FCT
      With new tools for the ASSET® ScanWorks® platform for embedded instruments engineers can simply select instruments they need, set their parameters and insert them into a field programmable gate array (FPGA) to function as a circuit board tester. Once inserted, ScanWorks FCT operates the board-tester-in-a-chip from a drag-and-drop user interface to perform validation, test and debug. (+)

      Features:

      182346318173571832.jpg
      • .
      • .
      • .
  • Mesa Electronics  (2)
    • 7I76-5I25 PLUG-N-GO
      The MESA 7I76 card set is a FPGA based 5 Axis step/dir control system for CNC, industrial automation retrofits, and OEM systems. (+)

      Features:

      209577839560378956.jpg
      • 5 Axis step/dir control system for CNC, industrial automation retrofits, and OEM systems
      • FPGA based, PCI or PCIE host interface controller.
      • STEP rates up to 8 MHz
    • 7I77-5I25 PLUG-N-GO KIT
      The MESA 7I77 card set is a FPGA based 6 axis analog control system for CNC, industrial automation retrofits, and OEM systems. (+)

      Features:

      209578868560992852.jpg
      • 6 axis analog control system for CNC, industrial automation retrofits, and OEM systems.
      • 6 axis of analog outputs and encoder inputs are sufficient for up to 5 axis machines plus spindle control.
      • Encoder inputs are individually programmable for TTL or differential mode.
  • Curtiss-Wright  (3)
    • VPX3-535 3U VPX ADC DAC 6 GSPS
      The VPX3-535 combines high-speed multi-channel analog IO, VITA 48.8 Air-Flow Through (AFT) technology, user programmable FPGA processing and local processing in a single 3U VPX slot for direct RF wideband processing to 6Gsps. This card allows for a high performance single slot transceiver with two 6Gsps 12bit channel, to over 6GHz instantaneous analog bandwidth, but can also scale to larger system with many channel. The architecture is optimized for RADAR, Electronic Warfare (EW), Signal Intelligence (SIGINT), Radar Warning Receivers (RWR) & Software Defined Radio (SDR). (+)

      Features:

      • 3U VPX ADC DAC Card with Xilinx UltraScale FPGA
      • 2x 6Gsps/12b analog inputs (or 4x 3Gsps/12b)
      • 2x 6Gsps/12b analog outputs
    • VPX3-534 3U VPX 6GSPS Tranceiver Card
      The VPX3-534 combines high-speed multi-channel analog IO, user programmable FPGA processing and local processing in a single 3U VPX slot for direct RF wideband processing to 6 Gsps. This card allows for a high performance single slot transceiver with two 6 Gsps 12bit channel, to over 6 GHz instantaneous analog bandwidth, but can also scale to larger system with many channel. The architecture is optimized for RADAR, Electronic Warfare (EW), Signal Intelligence (SIGINT), Radar Warning Receivers (RWR) and Software Defined Radio (SDR) applications. (+)

      Features:

      3928024634057507215.jpg
      • 3U VPX Analog I/O card with 2x 6Gsps/12b analog inputs (or 4x 3Gsps/12b)
      • Xilinx KU115 UltraScale user programmable FPGA
      • Xilinx ZU4 UltraScale+ Zynq
    • Software Defined Radio & EW System
      Curtiss-Wright’s mid-size SDR and EW System enables customers to select their preferred RF tuner and software applications (i.e. GNU Radio, Red Hawk or SCA). By provides up to sixteen analog inputs (12-bit up to 2 Gsps) and eight (14-bit < 2.8 Gsps output channels), the SDR and EW system is easily able to interface L-band or S-band RF frequencies. The SDR/EW is built using rugged COTS products and the system is qualified to MIL-STD-810 and MIL-STD-461 standards. (+)

      Features:

      3745809954057398615.jpg
      • COTS Software Defined Radio and Electronic Warfare System with RF tuner and software selectable by the system integrator
      • Intel Core i7 or Xeon Processor
      • 28VDC Power input per MIL-STD-704
  • Mouser Electronics  (1)
    • SmartFusion FPGA
      The only devices that integrate an FPGA, ARM Cortex-M3, and programmable analog, offering full customization, IP protection, and ease of use (+)

      Features:

      • No compromise microcontroller subsystem (MSS)
      • Programmable Analog
      • No compromise FPGA Fabric [...]
  • National Instruments  (1)
    • NI Single-Board RIO
      Single-Board RIO devices offer engineers and scientists a low-cost, integrated hardware option for deploying embedded control and data acquisition applications (+)

      Features:

      39115.jpg
      • The eight new sbRIO-96xx devices combine an embedded real-time processor, reconfigurable field-programmable gate array (FPGA) and analog and digital I/O on a single printed circuit board (PCB), making them ideal for applications that require flexibility, high-performance, and reliability in a small form factor
      • Engineers and scientists can use the NI LabVIEW graphical system design platform to customize NI Single-Board RIO hardware as well as develop all aspects of their embedded systems for increased productivity and shorter time to market
      • Single-Board RIO devices feature an industrial 266 MHz or 400 MHz Freescale MPC5200 processor built on Power Architecture technology, the Wind River VxWorks real-time operating system (RTOS), and Xilinx Spartan-3 FPGA
  • Parsec  (2)
    • PM488: Dual DAC PMC
      Two Analog Devices AD9772A 150MSPS 14-bit DAC converters (+)

      Features:

      20533.jpg
      • SNR of 71dB @ 25MHz and SFDR of 80dB @ 5MHz
      • 50 Ohm AC coupled analog outputs with 67.5MHz reconstruction pass band
      • 32/64-bit 33/66MHz 3.3V PCI interface implemented in Altera Stratix FPGA
    • PM480: Dual ADC PMC
      Two Analog Devices AD6645 105MSPS 14-bit ADCs (+)

      Features:

      20532.jpg
      • SNR of 75dB @ 15 MHz and SFDR of 89dBc @ 70 MHz
      • 50 Ohm AC coupled 100 kHz – 250 MHz analog inputs
      • 32/64-bit 33/66 MHz 3.3 V PCI interface implemented in Altera Stratix FPGA
  • Acromag  (1)
    • XMC-6VLX
      User-Configurable Virtex-6 FPGA Modules with PCIe and SRIO/Aurora Interface (+)

      Features:

      • Acromag’s XMC-6VLX modules feature a high-performance user-configurable Xilinx® Virtex®-6 FPGA enhanced with high-speed memory and a high-throughput serial interface.
      • The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
      • The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.
  • Inphi Corporation  (1)
    • 1385DX
      New 12.5 Gbps 1:8 Demultiplexer with latched comparator input enables high frequency communications and computing applications (+)

      Features:

      35706.jpg
      • Part of the High Speed Logic family of devices
      • High sensitivity latched comparator input and auto-synchronizing demultiplexer
      • Enables test and measurement, defense, and aerospace designers to develop high speed data acquisition front ends and to deserialize high speed signals
  • Intellitech  (1)
    • PCI ScanLab Tester
      A cost-effective PCI board tester (+)

      Features:

      • An alternative to In-Circuit Test (ICT) for digital testing of standard PCI circuit boards that employ IEEE-1149.1 Design for Test (DFT)
      • Supports both 5.0V and 3.3V 32-bit PCI cards
      • Built-in power supply
  • TEWS Technologies LLC  (2)
    • TAMC900
      High performance analog to digital converter AdvancedMC (+)

      Features:

      • Virtex-5 FPGA and high-speed onboard memory
      • Single-width, mid-height PICMG AMC.1 module; x8 PCI port (AMC.1 Type 8 compliant)
      • Virtex-5 LXT FPGA; 4 MB QDR-II SRAM
    • TAMC 900
      The TAMC900 is an analog to digital converter AdvancedMC with 8 high speed ADCs providing preprocessing power by a Virtex-5 FPGA and high-speed onboard memory (+)

      Features:

      38072.jpg
      • Single-width / mid-height AMC.1 Type 8 compliant module, x8 PCIe port; IPMI interface
      • Virtex-5 LXT FPGA; 4 MB QDR-II SRAM
      • Analog-to-Digital Converter: 8 x LTC 2254 ADCs, 105 MSps, 14 bit
  • Avnet Electronics Marketing  (1)
  • Mercury Systems  (3)
    • Echotek Series ECV4-2
      The ECV4-2, with input clock capability up to 1.5 GHz, is the highest performing digital receiver in an XMC form factor in the industry (+)

      Features:

      • Echotek Series products lead the mixed-signal industry in extracting clear signals from electronic clutter, forming a bridge between the realms of analog signals and digital processing. After an analog signal is received by an antennae or other sensor, it must be digitized and manipulated into a form amenable to signal processing. The challenge, and the key to successful applications, is to manage this transformation in real time while maintaining the integrity of the original signal
      • Processing power is delivered by a Xilinx Virtex-4 FPGA (field-programmable gate array). This FPGA allows users to run customized algorithms such as digital down/up conversion (wideband or narrowband), Fast Fourier Transforms (FFTs), and filtering directly on the ECV4-2. Modules are available in air-cooled or conduction-cooled versions [...]
    • Echotek Series ECV4-4
      The Echotek Series ECV4-4 family of digital receivers implements a flexible baseboard plus mezzanine architecture while supporting an extremely high density of FPGA-processing power (+)

      Features:

      • This combination of flexibility and power allows the family to deliver unique capabilities, such as multi-board coherency, while addressing a range of analog signal requirements
      • Seven user-programmable Virtex-4 FPGAs plus one Stratix FPGA
      • Multiple backplane interfaces for VXS, RACE++, and VME64x
    • Echotek Series DCM-V5-XMC
      A flexible FPGA-based architecture in a space-efficient mezzanine card form factor (+)

      Features:

      40594.jpg
      • User-programmable Virtex-5 FPGA functions as the primary data processor
      • Supported by Mercury's EchoCore firmware library
      • Two, single IF channel, Texas Instruments ADS6149 analog-to-digital converters
  • Memec  (1)
    • P160 Communications Module 3 Kit
      Ideal for Xilinx embedded MicroBlaze eystems (+)

      Features:

      19946.jpg
      • Adds Ethernet, Bluetooth, and analog I/O to Popular Memec Spartan-3 LC Board
      • Small, low-cost daughter card form-factor
      • Enables designers to add a standard set of processor peripherals and bulk memory to any P160 compatible system board
  • Cambridge Pixel  (1)
    • HPx-100
      A flexible, PCI-based primary radar interface card for analog and digital radars (+)

      Features:

      • Card is supported by Windows and Linux
      • Analog and digital interface with trigger and azimuth turning data
      • Onboard high-performance FPGA for radar processing
  • Sundance Multiprocessor Technology Ltd.  (1)
    • SMT397
      12 channels of analog inputs (+)

      Features:

      • 12-bit AD7892 ADC
      • Three zero crossing detectors
      • Two pulse differential RS-422 receivers
  • Gigaram, Inc.  (1)
    • Memory
      Materials procurement (+)

      Features:

      • Engineering and design services
      • Lead-free RoHS manufacturing
      • Fine pitch surface mount, including SMD 0201
  • GE Intelligent Platforms, Inc.  (1)
    • ICS-1556
      4-channel, 400 MHz 14-bit ADC PMC module with Virtex-5 SX95T user programmable FPGA (+)

      Features:

      • 4 transformer-coupled analog inputs
      • Analog-to-digital resolution 14-bits
      • Fs≤ 400 MHz per channel
  • D-TACQ Solutions Ltd.  (1)
    • ACQ132CPCI
      32 channel MHz class simultaneous sampling intelligent digitizer (+)

      Features:

      • 32 simultaneous analog input channels, 2-32 MSps/channel, 14-bit resolution
      • Differential inputs
      • Intelligent card with 1 Gigabyte memory and GbE on board
  • Alacron, Inc.  (1)
    • FastI/O
      An Alacron FastSeries PMC mezzanine I/O board with one TriMedia TM-1x00 processor (+)

      Features:

      • Both analog/digital and digital-only configurations
      • 16 Mbytes of SDRAM (up to 400 Mbytes/sec)
      • Programmable FPGAs with 16 Mbytes frame buffer
  • Actel Corporation  (1)
    • SmartFusion FPGA
      ARM Cortex-M3 core running at 100 MHz (+)

      Features:

      46604.jpg
      • 60K to 500K FPGA gate field with 350 MHz clocking
      • Analog Compute Engine that provides sequencing and computation up to three 12-bit ADCs and three 12-bit DACs [...]
  • EWA, Inc.  (1)
    • ADX 1480-4
      The ADX1480-4 offers four high speed analog-to-digital converter (ADC) channels on a single 6U VME Module. Each channel includes a 14-bit ADC with sampling rates to 80 MHz. (+)

      Features:

      • 4 Channels
      • Single-slot, 6U VME
      • 80 MHz, 14-bit sampling
  • Amfeltec  (1)
    • In-Circuit Programmer/Loader
      Stand-alone device: No connection to host PC needed during programming/loading operation (+)

      Features:

      42454.jpg
      • Supports all major FPGA/CPLD vendors
      • Supports Microchip/Silicon Labs microcontrollers
      • Supports wide range of I2C/SPI devices
  • Lattice Semiconductor Corporation  (1)
    • ProcessorPM Development Kit
      Features a ProcessorPM-POWR605 device along with a Power Manager II-POWR6AT6 preconfigured in a demonstration design that can be programmed using PAC-Designer software (+)

      Features:

      42996.jpg
      • Connecting the board to a host via USB allows designers to simulate and design a complete power monitoring and management circuit for MCUs, DSPs, and FPGAs [...]
12/6/21 15:15
Close

Subscribe to Analog updates