Cloud

Showing results for: data center
Refine Cloud companies and products:
cloud the cloud the intercloud cloud engineering green computing cloud collaboration web operating system mobile cloud computing data center shared services platform virtualization shared infrastructure gateway software autonomic computing mainframe computing client-server model grid computing utility computing application programming interface device/location independence multi-tenancy centralization peak-load capacity virtual private network opennebula eucalyptus infrastructure as a service iaas software as a service saas platform as a service paas solution stack thin clients computing resources level of abstraction information technology aws kpemmaraju infrastructure convergence converged infrastructure
Click on any vendor
to see a listing of
data center related products.
  • Mercury Systems  (8)
    • Mercury OpenVPX SFM6102 Ethernet Switched Fabric Module
      The Ensemble™ 6000 Series OpenVPX SFM6102 Switch Fabric Module from Mercury Computer Systems is a VITA 46/48 switch board that provides full inter-board 10 Gigabit Ethernet data plane and Gigabit Ethernet control plane connections. Built to OpenVPX (VITA 65) standard, the SFM6102 offers three functions in a single slot: data plane switching, control plane switching and chassis management. By providing Ethernet switching for the data plane and control plane, the SFM6102 delivers a standard open architecture suitable for net-centric processing and control applications within the embedded marketplace. The SFM6102 implements data plane switching via the Broadcom BCM56820 10 Gigabit Ethernet switch, supporting up to twenty 10 Gigabit Ethernet ports to the backplane for customer use. An additional four 10 Gigabit Ethernet ports are provided to the front panel in air-cooled configurations, allowing external traffic to flow directly on to the OpenVPX data plane. The SFM6102 module provides Gigabit Ethernet switching for up to 18 VPX payload slots via the on-board Broadcom BCM56312 Layer-2 managed switch. Up to two front-panel Gigabit Ethernet ports are available, allowing external Ethernet traffic access to the backplane Ethernet links. The SFM6102 module also implements OpenVPX chassis management capabilities, allowing the switch module to intelligently manage the entire system from a single point. Full-Featured Switching Technology The SFM6102 module utilizes the Broadcom BCM56820 as the heart of its data plane switching architecture. With 24 ports available, the BCM56820 provides up to 20 data plane interfaces to the backplane and four interfaces to the front panel (air-cooled configurations only). Supported by Broadcom’s FastPath software suite, the SFM6102 is fully managed, supporting the full spectrum of Layer 2 switching protocols and functions. A single SFM6102 module provides full connectivity for up to 18 payload modules in an OpenVPX chassis, with two interfaces provided for inter-switch connectivity. A second SFM6102 module can be configured as an additional full-duplex connection for payload modules, supporting applications with increased bandwidth requirements. Smaller configurations can create high-bandwidth interfaces by routing all four standard OpenVPX data plane ports from a payload slot to a single SFM6102 switch module. The SFM6102 is field configurable to support nineteen 10 Gigabit Ethernet interfaces to the backplane to allow support for up to 20 control plane interfaces. This setting is managed via an on-board soft jumper. System-wide Gigabit Ethernet Switching The SFM6102 module provides control plane Gigabit Ethernet switching in addition to data plane switching. The SFM6102 module implements the Broadcom BCM56312 switch to provide Gigabit Ethernet connectivity over the backplane to each payload module. System designers can avoid the need for an external control plane switch and cabling in their configurations. The SFM6102 module embeds this functionality within the OpenVPX system. This design leverages the design of the SFM6100 module, Mercury’s Gen1 Serial RapidIO® switch module. Front-Panel Ethernet Interfaces The SFM6102 module provides two Gigabit Ethernet ports to the front panel (air-cooled variants only; conduction-cooled configurations provide a single interface). These ports are routed to the Ethernet switch. This allows users to direct TCP/IP traffic directly into the on-board Gigabit Ethernet switch for dispersal among the payload modules. It also enables easy integration of the OpenVPX system into the network backbone of the deployed platform. A third port provides an interface to the on-board support processor for software and firmware updates, and for access to switch management software. Additionally, four 10 Gigabit Ethernet interfaces to the data plane Ethernet switch are provided in air-cooled configurations. These high-bandwidth interfaces support use cases such as direct data flow on to the 10 Gigabit Ethernet data plane, inter-chassis communication or failover capabilities. Highly Capable Switching Software With the assistance of the SFM6102 module’s on-board service processor, both the BCM56820 and the BCM56312 Ethernet switches can be configured as Layer-2 managed switches. Both the data plane switch and control plane switch support features such as link aggregation (including LACP), VLAN capabilities, spanning tree protocols (including MSTP, RSTP and STP), IGMP snooping, port mirroring, multicast functionality and jumbo packets. The switch can be configured to act as an in-system DHCP server, if required. Switch management support is available via SNMP, HTTP or SSH. System Management Capabilities An on-board system management block allows the SFM6102 module to manage the entire OpenVPX system. The on-board shelf manager can query sensor values across the system, reset and power up/down modules, set sensor thresholds, and manage firmware updates. Remote network access to the management subsystem is provided via a front-panel (air-cooled only) or backplane 10/100BASET port. For detailed specifications and general product information, visit www.mrcy.com or contact Mercury at (866) 627-6951 or info@mrcy.com. FEATURES: • High-bandwidth standard 10 Gigabit Ethernet data plane switching with front-panel access • Gigabit Ethernet control plane switching and front-panel • Gigabit Ethernet ports • Intelligent OpenVPX™ system management capabilities from a single point • Built-in accordance with OpenVPX design principles • Air-cooled and conduction-cooled variants available • Identical software infrastructure across Mercury products [...] (+)

      Features:

    • SFM6104 Ethernet/InfiniBand OpenVPX switch fabric module
      The SFM6104 Switch Fabric Module with enhanced InfiniBandTM and Ethernet capability for embedded, state-of-the-art sensor chain compute solutions. Designed to work seamlessly with Mercury’s advanced I/O, processing and OpenVPXTM development chassis offerings, the new module supports either SDR/DDR/QDR/FDR-10 InfiniBand or 10/40 Gigabit Ethernet across the data plane and Gigabit Ethernet on the control plane. The SFM6104 module is an industry-standard compliant building block that delivers data center-level performance across the latest generation of InfiniBand and Ethernet switch fabrics. When coupled with Intel® Xeon®-powered processor modules, with their native Quick Path Interconnect (QPI) and PCIe Gen 3 wideband capability is continued beyond the processor module to the switch fabric. This produces the most powerful and scalable commercial-item High Performance Compute (HPC) technology that can be deployed on rugged sensor platforms, providing true data center-level capability and performance for harsh environments. For detailed specifications and general product information, visit www.mrcy.com or contact Mercury at (866) 627-6951 or info@mrcy.com. FEATURES: 6U, single slot OpenVPXTM 40Gb/s Ethernet or InfiniBandTM switch fabric module with up to 18 payload slot support and chassis management. Combined with Intel® Xeon® OpenVPX compute modules, the most ruggedly powerful server-class compute ecosystem is created. • 6U OpenVPX single 1-inch slot module • 40 Gb/s Ethernet or InfiniBand high bandwidth switching: o Ethernet ecosystem; 40GBASE-KR4 and 10GBASE-KX4 o Or InfiniBand ecosystem; FDR-10, QDR, DDR and SDR • Switching for up to 18 payloads • Single point OpenVPX chassis management • Air-cooled, rugged conduction-cooled and Air Flow-ByTM packaging options [...] (+)

      Features:

    • Ensemble SFM3010
      The EnsembleTM 3000 Series SFM3010 3U OpenVPXTM Switch Fabric Module from Mercury Computer Systems combines Serial RapidIO® data-plane switching with a managed Gigabit Ethernet control-plane switch for maximum scalability (+)

      Features:

      52883.jpg
      • Control plane communications supported by a Broadcom Gigabit Ethernet switch with integrated MIPS processor core
      • Data plane communications supported by a Tundra Serial RapidIO switch with six 4x links to the backplane and two 4x links to the J15 XMC connector
      • XMC site supported by Serial RapidIO per VITA 42.2
    • 3U OpenVPX SFM3000
      The SFM3000 RapidIO Data-Plane Switch Module is a critical component in Mercury's Ensemble 3000 Series 3U OpenVPX Systems, enabling a high-bandwidth fabric (+)

      Features:

      43710.jpg
      • Data-plane switch
      • 10-Gbps full-duplex serial RapidIO (4 x 3.125 Gbps, with 8/10 encoding)
      • Two Tundra Serial RapidIO switches that support the RapidIO Rev 1.3 functionality
    • Ultra-Dense Embedded Mass Storage
      The data interface can be designed to meet system needs, including SATA, 10 GbE, SFPDP, Fibre Channel, or other high-bandwidth interconnects. Technologies such as POET™ (Protocol Offload Engine Technology) add further networking capabilities and innovative video compression solutions. Redundancy through technologies such as RAID can be implemented, as can encryption for security and deep packet inspection for protection against intrusions, non-compliant data, and viruses. Next-generation solutions will address methods for storing analog signals as well. (+)

      Features:

      304755662861925028.jpg
      • Had a storage capacity of 48 TB (upgradeable to 96 TB with no increase in SWaP)
      • Fit into the 0.4 cubic foot requirement
      • Weighed just 25 lb and required under 160W
    • MYRIAD CDL 2745
      The Mercury RACE++ Series MYRIAD CDL-2745 Router is a VME module designed to receive high- and low-rate serial data from four external sources of multi-channel Common Data Link (CDL) data (+)

      Features:

      • The CDL-2745 routes the data to any of four multichannel outputs or to system memory via the VME64 bus or RACE++ switch fabric
      • Additionally, the RACE++ Series MYRIAD CDL-2745 can output data in system memory as multiple high- and low-rate serial data streams suitable for input to a downlink or a CDL synchronizer such as the RACE++ Series MYRIAD CDL-2740
      • The unit receives CDL data from any of five input sources and routes it to any of five output ports
    • Echotek Series SCFE-V6-4QSFP-OVPX
      6U OpenVPX fiber I/O module (+)

      Features:

      • Combines 16 channels of high-speed fiber with three Xilinx Virtex-6 FPGAs to achieve a maximum data transfer capacity of 80 Gbps
      • The module is well suited to support the high-bandwidth digitized I/O created by various commercial and defense applications including the current generation of advanced ISR sensors
      • Each of the 16 channels of fiber supports a full duplex data rate up to 5 Gbps, while the three FPGAs enable onboard pre-processing of data streams for maximum application effi-ciency
    • Ensemble IO Mezzanine IOM-120/140 XMC
      The Ensemble™ I/O Mezzanine Series IOM-120 and IOM-140 (IOM-1x0) sFPDP XMC brings enhanced performance and flexibility to external I/O in a Serial RapidIO®-based streaming I/O XMC (Switched Mezzanine Card, VITA 42.2-2006) (+)

      Features:

      45527.jpg
      • Quad- or dual-channel fiber-optic serial Front-Panel Data Port (sFPDP)
      • High levels of speed and connection density
      • Support for all four Front-Panel Data Port (FPDP) data modes
  • Elma Electronic - Systems  (2)
    • ATCA7365 SystemPak
      High performance, multiprocessing system platform designed to address compute-intensive requirements in command and control data center applications (+)

      Features:

      52856.jpg
      • Combines the high performance multiprocessing of an integrated AdvancedTCA platform with a ruggedized design capable of withstanding the high shock and vibration found in rugged mobile transport applications
      • Successfully tested to withstand a 36" drop shock test per MIL-STD-810G
      • Three AdvancedTCA processor blades, each with two six-core Intel processors as standard
    • VME RAIDStor
      A single-slot 6U network attached storage blade that provides the same automatic, transparent data replication and re-sync of traditional box-level RAID storage modules (+)

      Features:

      .jpg
      • Automatic fail over, drive to drive or blade to blade
      • Automatic and transparent duplication of the data across the primary and secondary storage blades
      • Drive level front panel hot swap
  • Prodrive Technologies  (1)
    • Prodrive ATCA-IX5 and AMC-IX5
      Prodrive Technologies' Intel-based building blocks for MicroTCA and AdvancedTCA combine industry's leading compute architecture with the reliability, availability and serviceability (RAS) offered by xTCA form factors. The fifth generation Xeon parts offer unprecedented x86 compute performance per watt for use in scalable embedded applications in medical, industrial, telecom and data center applications.The AMC-IX5 offers up to 8 Intel Xeon cores at up to 2.0GHz, up to 16 Gigabyte of DDR4 and a wide range of connectivity options. Both 10 Gigabit Ethernet and Serial RapidIO at 20 Gigabit per second are supported for networking, in addition to PCI Express 3.0 for peripheral interfacing.The ATCA-IX5 houses one or two Intel Xeon-EP processors, linked together via Intel's Quick Path Interconnect. Prodrive's Embedded Connectivity Bridge (ECB) complements the raw processing power with flexible, high speed IO. Up to 40 gigabit Ethernet (40GbE) and 50 gigabit Serial RapidIO (SRIO) are supported to enable a broad range of applications, ranging from server applications in a virtualized environment to hard real-time and deterministic embedded applications.This blade is the ideal choice for high-end applications in many demanding markets.An open source bootloader and Linux are used for maximum logistic and application flexibility. Secure remote management is provided through IPMI-over-LAN. (+)

      Features:

      332852046481421501.jpg
      • ATCA-IX5: Intel Xeon E5-2600v4, up to 18 cores, up to 2.4GHz
      • AMC-IX5: Intel Xeon-D1500, up to 8 cores, up to 2.0GHz
      • On board Serial RapidIO at up to 50Gbps
  • Curtiss-Wright  (15 of 18)
    • DuraNET 4948 Ruggedized Rackmount Cisco 4948E Ethernet Switch
      The DuraNET® 4948 is a ruggedized version of Cisco Systems’ high performance Catalyst 4948E data center switch with forty-eight (48) downlink and four (4) uplink ports in a hardened 2U chassis qualified to meet MIL-STD-810 environmental and MIL-STD-461 EMI requirements. This powerful, multilayer switch enables demanding military and civil IP networking technology refresh programs to leverage the best that Cisco switching technology has to offer, but in a ruggedized 19� rack mount solution suitable for Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) applications. FEATURES: Ruggedized Cisco 4948E Ethernet Switch, IOS Managed – 48+4 Ports • Ruggedized Version of Cisco Catalyst 4948E Ethernet Switch with Best-in-Class Enterprise Services IOS® Software, Advanced QoS, IPv6 Support, Advanced Routing Protocols, BGP, 3DES • Non-Blocking 176-Gbps Aggregate Throughput • Large 17.5 MB Shared Buffer Optimized to Handle Microbursts • Advanced Quality of Service (QoS) with 8 Queues/per Port • Data Center Server Virtualization Support for Larger Layer 2 Domains Interfaces • Downlinks: 48x 10/100/1000 Gigabit Ethernet • Uplinks: 2x 10Gig Ethernet; 1x 10Gig and 1x 1 Gig Multi-Mode Fiber • Management: 1x RS-232 Serial Console, 1x 10/100 Management Ruggedization • Transient-Protected Power Supply for MIL Aircraft / Vehicle Use • Qualified to meet MIL-STD-810 Thermal, Shock, Vibration, Altitude, Humidity, Conditions and MIL-STD-461 for EMI/EMC • Rugged 2U, Aluminum Chassis with Front-to-Back Airflow • Circular MIL-DTL-38999 Connectors for Reliable Network Connections • Conformal Coated Boards for Humidity and Tin-Whisker Mitigation [...] (+)

      Features:

    • VPX6-6802 6U VPX Ethernet/InfiniBand Switch
      The VPX6-6802 is a combined Data Plane and Control Plane high-performance switch for small, mid-size and large 6U VPX systems. As part of the Curtiss-Wright Fabric40â„¢ family of high-speed VPX modules, the VPX6-6802 6U OpenVPX Ethernet & InfiniBand Switch provides centralized switching functionality for HPEC systems and supports both Ethernet and InfiniBand protocols on the Data Plane. The VPX6-6802 6U OpenVPX Ethernet & InfiniBand Switch supports full bandwidth, low latency Data Plane interconnects, eliminating the board-to-board data bottlenecks of previous generation systems. The VPX6-6802 Switch also includes an independent Control Plane Ethernet fabric, providing for 1G and 10G Control Plane interconnects. FEATURES: 6U OpenVPXâ„¢ Fabric40â„¢ Centralized Switch for Data Plane and Control Plane Connectivity - Supports 16U20F and 20U19F OpenVPX profiles Enables easy implementation of scalable high-performance centralized DSP clusters for small, medium and large systems Supports dual independent Data Plane and Control Plane fabrics conforming to virtually all popular OpenVPX central switch slot profiles Data Plane fabric supports both Ethernet and InfiniBand protocols with speeds up to 40G. Supports per-port speeds of 10G, 20G and 40G for 4-lane Fat-Pipe ports. Also supports single lane ports up to 10G 19 or 20 Data Plane ports to the VPX backplane + 2 additional ports and one 1000Base-T Ethernet port to the front panel (AC only) Control Plane Ethernet fabric provides 16 or 20 1000Base-X (SerDes) and 2x 1000Base-T Gigabit ports to the back + 2x 10GbE XAUI and one 1000Base-T port to the front panel (AC only) 6U VPX form factor [...] (+)

      Features:

    • CNS4 Rugged Data Recorder
      The Compact Network Storage 4-slot (CNS4) is a conductioncooled, high-performance data recorder with scalable storage and encryption options making it ideal for capturing critical data in a harsh environment. Curtiss-Wright’s Rugged Universal Capture Card (RUCC) provides data recording capabilities for a wide range of protocols such as Serial FPDP (sFPDP), GbE and 10 GbE. The CNS4 can support up to 8 TB of removable solid state storage. (+)

      Features:

      320756747221259204.jpg
      • Interfaces including serial FPDP (sFPDP), GbE and 10 GbE.
      • Up to 8 TB of removable solid state storage
      • 28 VDC power input
    • DTS1: 1-slot Rugged Network Attached File Server
      The industry’s first COTS data-at-rest Network Attached File Server that supports Commercial Solutions for Classified (CSfC) 2-Layer Encryption, with 2TB of storage. The Data Transport System 1-Slot (DTS1) addresses today’s rapidly increasing demand for high-capacity secure storage on deployed unmanned vehicles and ISR platforms. The single slot Network Attached Storage (NAS) device weighs only 4.0 lb. and measures only 1.5 x 5.0 x 6.5â€? (38.1 x 127 x 165.1 mm). It provides up to 2 TB of storage and supports advanced encryption to protect critical data-at-rest. Because the DTS1 functions as a NAS file server it helps system designers reduce SWaP by eliminating the need for independent storage in each of the platform’s computer, display, or management devices. It enables any network-enabled device to communicate with any other similar device, to retrieve stored data or save new captured data. The DTS1 is ideal for rugged applications that require the storage, removal, and transport of critical data such as cockpit data, ISR, mobile applications, heavy industrial , and video/audio data collection. (+)

      Features:

      • 2-Layer encryption
      • Network Attached Storage
      • iSCSI Block Storage
    • Data Transport System 1-Slot (DTS1)
      The DTS1 rugged Network Attached Storage file server is ideal for use in UAVs, Unmanned Underwater Vehicles (UUV), and Intelligence Surveillance Reconnaissance (ISR) aircraft. The DTS1 is easily integrated into network centric systems providing an easy to use, turnkey, rugged network File Server. The DTS1 system houses one Removable Memory Cartridge that provides quick off load of data. The RMC can be easily removed from one DTS1 and installed into any other DTS1 providing full data transfer, seamlessly between one or more networks in separate locations. (+)

      Features:

      343829224405507068.jpg
      • SWaP optimized form factor Network Attached Storage
      • Ethernet recording and packet capture
      • PXE boot of network clients
    • CNS Type 1 Network File Server
      The Curtiss-Wright Vortex CNS Type 1 is a rugged network file server that supports industry-standard network storage protocols (NFS, CIFS, HTTP, and FTP) through two 1GbE ports. To protect critical data-at-rest, the Vortex CNS Type 1 network attached storage (NAS) system incorporates Secret and Below (SAB) encryption. With the modular Flash Storage Module (FSM), the CNS provides 1TB of rugged, removable Type 1 encrypted storage which can be used to securely transport encrypted data between a base station and aircraft or mobile vehicle. With no moving parts or air-pressure dependent components, the CNS Type 1tolerates a broad range of harsh conditions. The CNS Type 1 supports Pre-boot Execution (PXE) protocol hosting boot files for network clients allowing designers to eliminate redundant storage on the clients. FEATURES: Type 1 encryption at Secret and Below for attend operations - Â? ATR chassis with door providing access to 1TB FSM - Network File Server with 2 x 1GbE ports - Standard network protocols supported: NFS, CIFS, HTTP and FTP [...] (+)

      Features:

    • Vortex VME Data Recorder
      Up to 385 MBps sustained streaming of digital data for recording, playback, and analysis (+)

      Features:

      • Open architecture makes custom I/O and feature enhancements easy
      • Multiple I/O port options - VME, CompactPCI, PCI, PMC, dual GbE, RS-422, RACE++
      • Pre-programmed Web browser GUI for all recorder functions with user-added I/O
    • SCRAMNet GT
      A real-time control and data network product (+)

      Features:

      18496.jpg
      • Suitable data communications solution for simulation, virtual reality, and other real-time applications with critical performance requirements
      • Based on a replicated shared-memory concept
      • Optimized for high-speed, ultra low-latency transfer of data among many computing platforms that are all solving portions of the same real-time problem
    • Vortex CNS
      The Vortex Compact Network Storage (CNS) is a conduction-cooled efficient network file storage device that uses less CPU and I/O power than conventional network file servers (+)

      Features:

      46347.jpg
      • 512GB of storage on solid-state drives through four 1GbE connections
      • CIFS, NFS, HTTP and FTP protocols
      • AES-256 Data encryption capability
    • DCU 4805 Data Concentrator Unit
      Designed to meet the most stringent aerospace requirements, Curtiss-Wright’s Data Concentrator Units (DCU) are microprocessor based controllers that receive a diverse assortment of inputs to process and formats them into common digital data formats for consumption by various aircraft systems. The DCU processes many digital communication protocols including RS232 and ARINC 429. (+)

      Features:

      320751246221947828.jpg
      • Interfaces including ARINC 429, RS-232, Ethernet, and discrete [...]
    • Vortex VR-6511S8
      6U VME/VXS (VITA 41) Multichannel Data Recorder with Solid State storage (+)

      Features:

      46345.jpg
      • Compact Rugged Data Recorder with up to 2TB of SSD capacity
      • VXS/VITA 41 recording and playback system
      • Embedded storage using 6U VXS Quad 2.5” SATA solid state or rotating hard disk drive storage
    • StarLink
      A StarFabric data interconnect PMC (+)

      Features:

      11869.jpg
      • For mission-critical military and aerospace applications that require fault detection and recovery as well as redundancy
      • LVDS connections operate at 622 Mbits/sec
      • Four pairs in each direction provide a link rate of 2.5 Gbits/sec
    • DCU 4650 Data Concentrator Unit
      Designed to meet the most stringent aerospace requirements, Curtiss-Wright’s Data Concentrator Units (DCU) are microprocessor based controllers that receive a diverse assortment of inputs to process and formats them into common digital data formats for consumption by various aircraft systems. The DCU processes many digital communication protocols including EIA/TIA/RS-232, EIA/TIA/RS-422, ARINC 429, ARINC-615, and High Integrity Full-Duplex Ethernet. (+)

      Features:

      320750451221969877.jpg
      • Interfaces including analog input, discrete, ARINC 429, RS-422, RS-232, Ethernet [...]
    • DCU 4111 Data Concentrator Unit
      Designed to meet the most stringent aerospace requirements, the Curtiss-Wright Model 4111-1 Data Concentrator Unit (DCU) is a microprocessor based controller that receives a diverse assortment of inputs to process and format them into common digital data formats for consumption by various aircraft systems. The DCU design processes many digital communication protocols including EIA/TIA-422, ARINC 429 and Ethernet. (+)

      Features:

      320750269221207198.jpg
      • Rugged construction for military helicopter applications
      • Dual 28Vdc power Inputs normal and backup
      • Interfaces including: analog input, analog output, discrete arinc 429, ethernet, rs-232 [...]
    • FibreXtreme SL240
      A serial FPDP data board (+)

      Features:

      • Blasts data up to a sustained 247 MBps
      • Suitable for applications including DSP, radar and sonar, medical imaging, range and telemetry systems, and video production
      • Support up to a 2.5 GHz serial data link, which utilizes a highly specialized communications protocol optimized for maximum data throughput
  • Artesyn Embedded Technologies  (4)
    • Centellis 2000
      The Centellis 2000 compact AdvancedTCA platform provides the architectural benefits of larger systems for central office and data center requirements (+)

      Features:

      34137.jpg
      • 3U, 19" chassis with two horizontal blade slots
      • Scalable reliability for central office and data center environments
      • Front-to-rear cooling
    • Centellis ATCA Platforms
      Emerson has been supplying integrated, application-ready ATCA® systems under the Centellis™ name for over 10 years. Our unrivalled experience and expertise is why research reports that Emerson has the largest installed base of ATCA systems. Our Centellis systems include 2-slot, 6-slot and 14-slot variants designed to meet the needs of both central office and network data center deployments. Target applications include military communications, ship-based network datacenters, command center equipment, server platform for electronic warfare, surveillance and security infrastructure, data processing and logging. Emerson ATCA equipment mounted in shock-isolated racks was used by a US military contractor in afloat shock testing (better known as Class A barge testing). The US Navy has also run an operational ATCA system in a shock-isolated rack to simulate the effects of a barge test. The success of these tests clearly demonstrates the inherent ruggedness of ATCA equipment operating in battle ready operations. FEATURES: 1, 10G and 40G systems with 2-, 6- or 14-slots Best-in-class cooling, exceeding CP-TA B.4 thermal specification AC or DC power input options Up to 350 Watts/blade power distribution Designed for NEBS/ETSI or network datacenter [...] (+)

      Features:

    • ATCA-7301
      High performance AdvancedTCA processor blade for data and control plane applications (+)

      Features:

      34907.jpg
      • 2.16 GHz Intel Core 2 Duo processor
      • Onboard 24-port Gigabit Ethernet switch
      • AMC.0, AMC.1, and AMC.2 compliant with two mid-size AMC sites
    • ENTICE
      A modular call control and element management system (+)

      Features:

      • Supports legacy and green field networks
      • Offers a foundation for an unlimited range of end-user services
      • Bridges H.323, SIP, SS7, ISDN, IP, TDM, and other leading communications protocols
  • Cavium Networks  (4)
    • LiquidIO® Server Adapters
      LiquidIO Server Adapter family enables data centers to rapidly deploy high performance SDN applications for both installed and new infrastructure while clearly enhancing server utilization, response times and network agility. This product family, in a standard server compliant half-height PCI Express form-factor, provides a proven, high-performance, general-purpose programmable adapter platform that enables cloud service providers to offload any functionality in Data Center. (+)

      Features:

      321823351871199124.jpg
      • Supports VXLAN, NVGRE, STT, IPsec and custom overlay stacks
      • Supports Open vSwitch, Openow compatible
      • Integrated networking and System I/O: 10 GbE, PCIe Gen2
    • Single Chip NITROX
      The industry's first stand-alone “bump-in–the-wire” single chip deep packet inspection processor family that can achieve up to 40 Gbps of application recognition and protocol analysis performance (+)

      Features:

      • The rich feature set and high performance of this processor family is enabled by the on-chip revolutionary Hyper Finite Automata (HFA) engines and optimized TurboDPI software
      • NITROX DPI II enables market-leading performance, and speeds up the time to market for OEMs building equipment for Enterprise, Data Center, 3G & 4G Wireless and Service Provider applications [...]
    • ThunderX ARM Processors
      64-bit ARMv8 Data Center & Cloud Processors (+)

      Features:

      306582212861465303.jpg
      • High performance custom cores, single and dual socket configurations, very high memory bandwidth, large memory capacity, integrated hardware accelerators, fully virtualized core and IO, scalable Ethernet fabric and feature rich I/O’s
      • Workload Optimizedâ„¢ SKUs that enable servers & appliances that are optimized for compute, storage, network and secure compute workloads in the cloud
      • Fully compliant with ARMv8 architecture specifications as well as ARM’s SBSA
    • CN8890
      ThunderX™ product family provides the best in class 64-bit ARMv8 Data Center & Cloud Processors, offering unprecedented level of integration and industry leading SoC performance. With high performance custom cores, single and dual socket configurations, very high memory bandwidth, large memory capacity, integrated hardware accelerators, fully virtualized core and IO, scalable Ethernet fabric and feature rich I/O’s that enable best in class performance/$ and performance/watt. (+)

      Features:

      • The first ARM based SoC that scales up to 48 cores with up to 2.5 GHz core frequency
      • The first ARM based SoC to be fully cache coherent across dual sockets using Cavium Coherent Processor Interconnect (CCPIâ„¢)
      • The largest integrated I/O capacity with 100s of Gigabits of I/O bandwidth
  • SANBlaze Technology, Inc.  (1)
    • Mobile Compute Platform
      Mobile Compute Platforms are designed for Tented field and Mounted deployments. Tented Field deployments are integrated into rugged transit containers to meet stringent shock and vibration requirements. Common applications include: Command, control and mission logistics as well as communications and messaging. AdvancedTCA is well suited for Ship, Air, and vehicle mounted implementations that may have: physical /accessibility restrictions, data pre-load requirements and where low power provides strategic and cost advantages. (+)

      Features:

      202306862961896650.jpg
      • Payload Blades: multi-core true 64-bit SMP, up to 96GB
      • Storage Blades: 6TB per slot, RAID 01,5,6
      • Switch Blades: multiport, 10Gb
  • Innominate  (1)
    • mGuard Secure Cloud Ecosystem
      The mGuard Secure Cloud offers both operators and machine and plant engineering companies a turnkey VPN ecosystem for industrial remote services. Set up in just a few steps, the revolutionary easy-to-use Web interface allows service staffs fast and highly secure access to machines, IPCs and Industrial Control Systems. Also without IT knowledge, secure remote services can be performed at any time and any place. The mGuard Secure Cloud is available as a hosted service and in the form of an 19" appliance to operate in private data center. [...] (+)

      Features:

      286879585861469079.jpg
  • Kontron  (4)
    • ATCA INTEGRATED OM PLATFORMS
      Kontron pre-validates, pre-tests and, of course, provides the flexibility to integrate 3rd-party ATCA/AMC hardware and HA middleware (+)

      Features:

      • Kontron offers GbE and 10 GbE AdvancedTCA and AMC platform elements, plus integration services that includes third-party hardware and carrier-grade OS and HA middleware solutions
      • OM9140 – ATCA 14-slot, 13U Integrated Platform: ideal for exceptional transaction processing performance with low latency and High Availability (HA) in a redundant N+1 configuration
      • OM9060 – ATCA 6-slot, 5U Integrated GbE/10GbE Platform: targeted at applications with high demands on the processing of transactions
    • Kontron KTC5520-EATX Server Board
      Cost-effective and long-life server-class embedded motherboard (+)

      Features:

      42383.jpg
      • Designed with an extensive feature set and two new Intel Xeon 5518 45nm quad-core processors
      • New Intel microarchitecture processor/chipset
      • KVM/VM over IP and remote management; IPMI v2.0
    • CG2100
      Carrier Grade Server, with support of the Intel Xeon Processor 5600 series, further extending Kontron's commitment to Telco customers by providing the latest in state-of-the-art rack mount servers (+)

      Features:

      • Combines high performance, ruggedness, reliability, and long life in a NEBS-3 and ETSI-compliant 2U chassis
      • Suits the demanding environment and limited space of the Telco central office, as well as for network data centers
      • Enables OEMs and TEMs to create specialized, value-added solutions for a variety of telecom applications including unified messaging, SoIP, call control, media and signaling gateways, and operational system support
    • microETXexpress-PM
      microETXexpress – based on ETXexpress/COM Express (+)

      Features:

      • With Intel Pentium M and Intel Celeron M processor
      • PCI or PCI Express – the elemental data highway
      • Parallel ATA or serial ATA – for performing drives and data storage
  • Server Technology, Inc.  (1)
    • 18 innovative CDUs
      Cabinet power distribution units (CDUs) for the data center industry (+)

      Features:

      • High amperage (208V, 3-phase, 50A or 60A) Smart Power Monitors for storage arrays, network switches and to refit unmonitored installations
      • New Basic and Metered 3-Phase CDUs with circuit breakers for branch circuit protection
      • The first 208V 50/60A Basic and Metered CDUs for high density applications
  • National Semiconductor  (3)
    • DS50PCI401 /DS64BR4
      Quad transceivers that extend backplane and cable reach up to 30 percent farther than competitive devices (+)

      Features:

      • PowerWise signal conditioning devices drive high-speed signals in data center servers and Storage Area Networks (SANs)
      • The DS50PCI401 is PCI-SIG-approved to the PCI Express (PCIe) Gen1 (2.5 Gbps) and Gen2 (5 Gbps) specifications, while the DS64BR401 supports both 3 Gbps and 6 Gbps SATA/SAS specifications, along with other high-speed signaling standards such as XAUI, Serial RapidIO and Fibre Channel
      • The DS50PCI401 four-lane, bidirectional PCIe transceiver provides both adjustable receive equalization and transmit de-emphasis, along with the industry's lowest power at 190 mW typical per lane
    • DS50PCI401
      Energy-efficient, quad transceivers that extend backplane and reach up to 30% farther than competitive devices (+)

      Features:

      42358.jpg
      • These PowerWise signal conditioning devices drive high-speed signals in data center servers and storage area networks (SANs)
      • The DS50PCI401 is PCI-SIG-approved to the PCI Express (PCIe) Gen1 (2.5 Gbps) and Gen2 (5 Gbps) specifications, while the DS64BR401 supports both 3 Gbps and 6 Gbps SATA/SAS specifications, along with other high-speed signaling standards such as XAUI, serial Rapid IO (sRIO) and Fibre Channel
      • The DS50PCI401 four-lane, bidirectional PCIe transceiver provides both adjustable receive equalization and transmit de-emphasis, along with the industry's lowest power at 190 mW typical per lane. In addition, it supports a selectable low-power state as well as power-down of individual lanes
    • DS64EV400 Equalizer
      Compensates for transmission medium losses and reduces deterministic jitter for four data transmission channels (+)

      Features:

      • Provides 20 dB of boost to equalize up to 10 m of CAT5 cable, up to 40 inches of FR-4 printed circuit board (PCB) at data transmission rates up to 6.4 Gbps and up to 30 inches of FR-4 at data rates up to 10 Gbps -- with only 0.175 units interval (UI) of residual jitter at the equalizer output
      • Inactive channels can be automatically shutdown for further power savings of 85 percent per channel
      • Field-programmable gate arrays (FPGAs) and transmission media
  • Dintek Electronic Ltd.  (1)
    • GBE blade server
      PICMG 2.16 Gigabit Ethernet Blade Server for small size security, IP-PBX, call center, media serve or soft Switch, VPN, Digital Radio, Digital Video application (+)

      Features:

      • DMP-1000, GbE Computing Blade
      • Based on PICMG 2.16
      • 6U 4HP 160 mm form factor
  • Hoffman  (1)
    • PSCPC2069B
      Designed to address data center thermal management concerns. Passive or active thermal management in random or hot/cold aisle layouts. Dissipate 2,500 to 8,000 watts of server-generated heat. Conforms to server manufacturer open-space requirements (+)

      Features:

      • New Features Address Data Center Requirements to Maintain Safe Environment for Reliable Equipment Operation
      • These new PROLINE® packages provide increased heat dissipation to better manage the operating environment for networking equipment.
      • The new PROLINE® cabinets provide options for passive or active thermal management, in conjunction with random or hot aisle/cold aisle configurations.
  • Radisys Corporation  (1)
    • Promentum ATCA-1200
      ATCA Managed Quad-AMC Carrier Blade (+)

      Features:

      44284.jpg
      • Enables a user to build multiple AdvancedTCA modules with different AMC configurations – PrAMC, Security (IPSec/SSL), Storage, I/O AMC, etc.
      • Control plane consists of the MPC8548 PowerQuik III processor, the Local Management processor (LMP), the PCI-E links connecting each AMC to the LMP and a 1 GE control port from the LMP to the switch
      • The PCI-E links, which are routed to each AMC via a PCI-E switch, provides the means of supporting “un-intelligent” boards and allow an application running on the LMP to initialized the AMC device much like legacy PCI devices were initialized. PCI-E switch also supports bridging function to enable AMC to AMC PCI-E communication or control
  • ADLINK Technology, Inc.  (4)
    • cPCI-3920
      3U CompactPCI Intel Core 2 Duo Processor (+)

      Features:

      35076.jpg
      • Low power Intel Core 2 Duo and Core Duo Processor
      • Intel 3100 Chipset
      • Up to 2 GB DDR2-400 Registered ECC Soldered SDRAM
    • aTCA-9710
      The aTCA-9710 offers 16 channels of DDR4-2133 VLP RDIMMS, enabling higher clock and data transfer rates than those seen in previous generation memory. The new ATCA processor blade delivers unparalleled performance while keeping a thermal envelope under 105W—a level lower than its predecessor—due to the adoption of Intel® Node Manager 3.0, a power management technology. With the many enhancements to this latest platform from Intel, the aTCA-9710 is suitable for carrier-grade server, data center, networking, and also DPI, SDN and NFV applications. (+)

      Features:

      293447269861404272.jpg
      • Two Intel® Xeon® processor E5-2600 v3 family (12C/24T)
      • 16 memory sockets support DDR4-2133 REG/ECC VLP RDIMM up to 256 GB
      • Intel® C610 PCH
    • cPCI-3510 Series 3U CompactPCI® Processor Blade with ECC
      ADLINK cPCI-3510 is the latest 4th generation Intel® Core™ i7 3U CompactPCI processor blade, supporting the quad-core Intel® Core™ i7-4700EQ @2.4GHz, 8GB of DDR3L-1600 error-correcting code (ECC) memory soldered onboard, and 32GB of SATA NAND flash. The cPCI-3510 is designed to meet MIL-STD-810G, supporting wide temperatures from -20°C to 70°C and withstanding high vibration environments of 5Grms under operation. The cPCI-3510 Series is a reliable solution for applications in military and transportation, with integrated Intel® HD 4600 graphics that benefit video transcoding applications. The cPCI-3510 Series supports three independent displays with two dual-mode DisplayPorts and one DVI-I output. The DisplayPort supports single link DVI or HDMI through a passive adapter cable and analog VGA interface using an active adapter cable. With the ADLINK XMC-G460 graphics module installed in the XMC site, the cPCI-3510 Series supports up to four independent displays and is suitable for military and aerospace disaster recovery or multi-screen control center applications. FEATURES: Quad-core 4th generation Intel® Core™ i7 processor Up to 8GB DDR3L-1600 ECC soldered memory onboard Supports three independent displays Available in Extreme Rugged™ version with –40°C to +80°C operating temperature range without forced air flow System/peripheral slot operation PICMG 2.30 CompactPCI PlusIO-compliant Onboard 32GB NAND flash [...] (+)

      Features:

    • cPCI-3510 Series 3U CompactPCI® Processor Blade with ECC
      ADLINK's cPCI-3510 is the latest 4th generation Intel® Core™ i7 3U CompactPCI processor blade, supporting the quad-core Intel® Core™ i7-4700EQ @2.4GHz, 8GB of DDR3L-1600 error-correcting code (ECC) memory soldered onboard, and 32GB of SATA NAND flash. The cPCI-3510 is designed to meet MIL-STD-810G, supporting wide temperatures from -20°C to 70°C and withstanding high vibration environments of 5Grms under operation. The cPCI-3510 Series is a reliable solution for applications in military and transportation, with integrated Intel® HD 4600 graphics that benefit video transcoding applications. The cPCI-3510 Series supports three independent displays with two dual-mode DisplayPorts and one DVI-I output. The DisplayPort supports single link DVI or HDMI through a passive adapter cable and analog VGA interface using an active adapter cable. FEATURES: Quad-core 4th generation Intel® Core™ i7 processor Up to 8GB DDR3L-1600 ECC soldered memory onboard Supports three independent displays Available in Extreme Rugged™ version with –40°C to +80°C operating temperature range without forced air flow System/peripheral slot operation PICMG 2.30 CompactPCI PlusIO-compliant Onboard 32GB NAND flash [...] (+)

      Features:

  • Agilent Technologies  (3)
    • N2X
      A multiservices test solution for converging voice and data networks (+)

      Features:

      • Combines services testing with carrier-grade infrastructure testing and emulation
      • 40 Gbps Packet-over-Sonet (POS) interface test card
      • 10/100/1000BASE-T Ethernet test card supports 32,000 individual data streams
    • E5398A Connectorless Probe
      17 channels, differential or single-ended clock, and single-ended data (+)

      Features:

      • Capable of data rates >2.5 Gbps (maximum rate depends on analyzer used)
      • 250 mVp-p minimum signal amplitude [...]
    • E5396A Connectorless Probe
      17 channels, single-ended clock and data (+)

      Features:

      • Capable of data rates >2.5 Gbps (maximum rate depends on analyzer used)
      • 500mVp-p minimum signal amplitude
      • Compatible with 54830 Series mixed-signal oscilloscopes [...]
  • 3M  (1)
    • Active Optical Cable (AOC) Assemblies
      The 3M Active Optical Cable (AOC) Assemblies for QSFP+ and CX4 applications offer an advanced new light-engine design to provide design engineers with exceptional performance at a low cost. (+)

      Features:

      • 3M AOC assemblies use 540 mW of energy per end
      • 3M AOC QSFP+ cable assembly offers four-channels of bi-directional data at up to 10 Gbps
      • 3M AOC CX4 cable assembly offers four channels of bi-directional data at up to 5 Gbps using legacy interfaces
  • Inphi Corporation  (1)
    • 2514DZ
      Delivers large differential output voltage and high data rates required for next-generation 40G DQPSK and 100G optical communications applications (+)

      Features:

      35705.jpg
      • Differential output voltage up to 8.0 Vpp and data rates greater than 25 Gbps
      • Works with leading differential Mach Zehnder modulators from Fujitsu and Sumitomo Osaka Cement Company
      • As the transmission line rate increases from 10 Gbps to 40 Gbps, significant fiber impairments limit how far the signal can be transmitted before regeneration
  • IEI Technology USA Corp  (3)
    • TANK-860-QGW
      Three-in-one virtualized application (+)

      Features:

      350117216431949902.jpg
      • Remote monitoring & Multi-server management
      • Data center and backup
      • Data security
    • TANK-860-QGW
      IEI’s new generation smart fan-less embedded computer has an ultra-rugged design that allows stable operation even in the worst environments; it is not only quiet but also safe. The TANK-860-QGW supports the QTS Gateway operating system allowing you to easily monitor the system status. Diverse application programs can also be downloaded to satisfy different application needs. (+)

      Features:

      350473726861526680.jpg
      • Three-in-one virtualized application
      • Remote monitoring & Multi-server management
      • Data center and backup
    • TANK-860-QGW
      TANK-860-QGW cloud-based IPC with QTS Gateway operating system, offers endless possibilities for connecting devices, communications, and cloud servers for IPC applications (+)

      Features:

      338372217622794611.jpg
      • Built-in QTS Gateway operating system that can be visualized immediately.
      • Supports remote connection (myQNAPcloud) and hybrid backup (Hybrid Backup Sync)
      • QRM+ easily monitors IPMI equipment, servers, PCs and production line equipment
  • Targa Systems Division  (1)
    • Ethernet NAS DTU
      Network Attached Storage (NAS) Data Transfer Systems (+)

      Features:

      • Two versions of the NAS DTUs are offered
      • Series 3 PC Card NAS DTUs: Network Attached Storage (NAS) device for military and aerospace systems, replacing Server Attached Storage in most airborne platform application systems
      • Include flight management, cockpit instrument display, terrain awareness and warning, map systems, radar systems, cockpit/ground communications, navigation positioning, and satellite communications
  • Critical I/O  (3)
    • Model FCA2460-AMC
      4 Gb Fibre Channel interface (+)

      Features:

      • Complies with the AdvancedTCA Advanced Mezzanine Card standard (AMC.1 with PCI Express host interface)
      • First 4 Gb Fibre Channel AMC Interface
      • Provides 4 Gbps Fibre Channel connectivity to AdvancedTCA systems -- highest performance Fibre Channel AdvancedMC interface available
    • SensorLink SLX101
      A wideband sensor I/O to allow easy connection and management for 1 GbE and 10 GbE networks, enabling an Ethernet sensor fabric for high-performance systems (+)

      Features:

      33179.jpg
      • Enables Ethernet data networks to be applied to even the most demanding real-time system applications such as radar, data acquisition, sonar, FLIR, SIGINT, video distribution, and signal processing
      • Self-contained, needs no host processor
      • Wirespeed throughput
    • FCA2440
      The FCA2440 is the industry's first 4 Gbps Fibre Channel interface to comply with the VITA 42.3 standard and is the highest performance interface for embedded computing apps (+)

      Features:

      32292.jpg
      • It provides 4 Gbps Fibre Channel connectivity to PCI Express-based systems, which eliminates the performance limitations imposed by the PCI data bus
      • Sustained data rates of 1500 MBps
      • I10 µsec RDMA data transfers
  • Electro Standards  (15 of 26)
    • M7435 A/B Switch
      Model 7435 is an Auto-Controlled 16-Channel RJ45 A/B Switch that allows sharing of a single RJ-45 device among 2 others for each of the 16 channels (+)

      Features:

      • The switch ports are transparent to all data
      • On all of the RJ45 ports, pins 2, 4, and 5 are switched and pin 6 is ground
      • All channels can be switched simultaneously or independently
    • M7199
      M7199 4-Channel BNC A/B Switch that allows each channel to share two BNC networks from one Common BNC network or device (+)

      Features:

      53019.jpg
      • Each channel allows access to two BNC networks from one COMMON BNC network or device
      • Four independent switch channels may be switched individually or simultaneously
      • The center pin of the BNC interface is switched only
    • M7435 A/B Switch
      An AutoControlled 16-Channel RJ45 A/B Switch that allows sharing of a single RJ45 device among 2 others for each of the 16 channels (+)

      Features:

      42324.jpg
      • The switch ports are transparent to all data
      • On all of the RJ45 ports, pins 2, 4, and 5 are switched and pin 6 is ground
      • All channels can be switched simultaneously or independently
    • M7209 BNC Switch
      M7209 BNC A/B Switch with Remote allows access to two separate BNC ports via the Common port (+)

      Features:

      41613.jpg
      • 3 Isolated BNC port connectors on rear panel
      • Center pin and shell switched
      • The switch ports are transparent to all data
    • 9225 A/B Switch
      N-Type coaxial A/B switch allows the sharing of a single N-Type coaxial interface device between two other N-Type coaxial interface devices (+)

      Features:

      • A manual rotary switch mounted on front panel allows A or B port to be switched to the common port
      • The center pin and shell of each coaxial connector are switched
      • The switch ports are transparent to all data
    • M7203 BNC Switch
      The Model 7203 is a remotely controllable BNC A/B Network Switch that allows a BNC Port to be shared among 2 others (+)

      Features:

      43824.jpg
      • (3) Isolated BNC port connectors on rear panel
      • Center pin and shell switched
      • The switch ports are transparent to all data
    • Model 8036
      The Model 8036 4-Channel E1 A/B Switch simultaneously switches all four channels via front-panel rotary knob, utilizing BNC Coaxial Connectors. (+)

      Features:

      224176723018196930.jpg
      • Each of four channels allows quick connection to any one of two E1 devices from one Common E1 channel.
      • Manual operation via front-panel rotary switch.
      • Simultaneously switches all four channels via front-panel rotary knob.
    • Model 7263
      The Model 7263 is an ST Duplex Fiber Optic Switch/Converter with 3 positions, A/B/Cut-Off (+)

      Features:

      53021.jpg
      • Allows access to two fiber optic ST Duplex 100Base-FX networks from one 100Base-TX network from one 100Base-TX network
      • Internal data interface conversion circuitry allows Fiber Optic-to-Copper network interconnection
      • CUTOFF switch position stops any and all data throughput for the unit
    • Model 8449
      The Model 8449 is a multi-interface A/B switch with Barrier Terminal Block Port for Remote Monitoring and 2 channels of RJ45 connectors and 3 channels of BNC connectors. (+)

      Features:

      19462748470183810.jpg
      • Each channel allows quick connection to any one of two devices from one Common device
      • Simultaneously switches all five channels via front-panel rotary switch
      • Four position barrier terminal block port provides switch position/status via two contacts for A position and two contacts for B position
    • Model 9503 Switch
      The Model 9503 Network Switch system which is comprised of three independent sharing switches efficiently packaged in one unit (+)

      Features:

      44367.jpg
      • The Model 9503 Switch system is comprised of three independent sharing switches efficiently packaged in a 19-inch wide 2U high (3.5") rackmount unit. The network switch functions are described and illustrated below
      • Independently switch each of the three channels manually via three knobs located on the front panel, one knob per channel
      • Channel 1: DB25 6-Position Switch with (7) DB25 female connectors for ports A, B, C, D, E, F and Common, all 25 leads switched
    • Model 6259R
      The Model 6259R is a manually operated 16-Channel ST Simplex Fiber Optic A/B/Offline switch that is also RoHS Compliant (+)

      Features:

      47466.jpg
      • All switch control is from the front-pane
      • No remote control
      • Front panel LED's for display of current position of all channels as well as the power status
    • DB9 Network Switch
      M7200 DB9 A/B Network Switch with Remote Control allows the connection of one device between two other devices or networks (+)

      Features:

      42557.jpg
      • A, B, and Common connectors are DB9
      • All 9 interface pins are switched
      • The switch ports are transparent to all data
    • M9450 DB25 Switch
      The Model 9450 DB25 Voice/Data A/B Switch with half-rack and full rack-mount enclosure allows the user to switch Common equipment to either VOICE or DATA ports with a simple turn of a knob (+)

      Features:

      • Manual, Single Channel A/B Switch in Slim Rack-mount enclosure
      • DB25-Female Connectors used for the VOICE, DATA, & COMMON ports
      • Manual control means no power supply necessary
    • Model 7370
      The Model 7370 is an RJ45 A/B Switch, with Serial Remote Control Port certified for Cat6A compliance (+)

      Features:

      47446.jpg
      • Allows access to two RJ45 Cat6A interface networks from one COMMON RJ45 Cat6A interface network or device
      • Switches all 8 pins of the RJ45 interface
      • Eliminates the need to plug and unplug cables
    • Model 7371 Cat6A RJ45 A/B/C Switch
      The Model 7371 Cat6A RJ45 A/B/C Switch with Serial Remote Control allows access to three RJ45 Cat6A Interface Networks from one Common RJ45 Cat6A interface network. (+)

      Features:

      18899660770183810.jpg
      • Allows access to three RJ45 Cat6A interface networks from one Common Cat6A network or device
      • Switches all 8 pins of the RJ45 interface
      • Eliminates the need to plug and unplug cables
  • AVIVA Networks  (1)
    • AMC10G
      Flow-through architecture, with a 10 Gbps CX4 line-side interface for data center and enterprise applications (+)

      Features:

      32884.jpg
      • Available with multi-mode and single mode XFP optical interface
      • Front Panel 1000BASE-T 1 Gbps LAN/Maintenance port
      • AMC.0 IPMI V1.5 subsystem initializes board parameters, monitors board voltage and temperature
  • Aitech Defense Systems  (1)
    • C660
      The rugged C660, first in a new series of high-performance, single-slot Gigabit Ethernet switches. (+)

      Features:

      216908844960514167.jpg
      • The new 6U CompactPCI PICMG 2.16 compatible switch serves as a robust communications backbone for moving massive amounts of data around tightly coupled processing or I/O data concentrators.
      • Can be installed in rack-mounted equipment and backplanes or packaged in stand-alone rugged subsystems.
      • Provides high-speed connectivity and traffic management for streaming video, audio and data
  • AMAX  (1)
    • ServMax AS-5160G
      The highest-density 5U 16GPU server solution on the market today (+)

      Features:

      • Delivers 16.48 teraflops of single precision performance in a single chassis
      • Features ECC memory for uncompromised accuracy and scalability
      • Delivers 25% greater density, 31% lighter weight, and 11% fewer racks and switches
  • Advantech Corporation  (15 of 18)
    • EKI-1521 and 1522
      High Availability Serial Device Servers (+)

      Features:

      36832.jpg
      • Allow RS-232/422/485 serial devices to be remotely monitored, managed, and controlled over Ethernet and Internet Protocol (IP) networks
      • Dual 10/100Base-TX Ethernet ports and dual Media Access Controllers (MACs
      • Ensure data transmission even in the event of a network link failure
    • EKI-1524
      4-Port RS-232/422/485 Serial Device Server (+)

      Features:

      38303.jpg
      • Allowing up to four RS-232/422/485 serial devices to be remotely monitored, managed, and controlled over Ethernet and Internet Protocol (IP) networks equipped with dual 10/100BASE-TX Ethernet ports and dual Media Access Controllers (MACs), this device ensures data transmission even in the event of a network link failure
      • Dual Ethernet LAN redundancy
      • With redundant Ethernet connections, communication is not interrupted in the event of a network problem
    • Ethernet Switches
      Advantech Launches New Rugged, Compact, & Fast Ethernet Switches (+)

      Features:

      46813.jpg
      • The Industrial Automation Group of Advantech introduces a new series of compact Ethernet switches to focus on machine and factory automation applications
      • These switches include full Gigabit (EKI-2728MI, EKI-2748FI, and EKI-2748CI) and 10/100M Ethernet (EKI-2548I, EKI-2548SI, and EKI-2548MI)
      • They are compact and able to meet a wide range of communication needs
    • EKI-6538
      A Industrial Ethernet Switches for mission-critical plant floor applications (+)

      Features:

      31912.jpg
      • Eight 10/100BASE-TX Ethernet ports
      • Wide dual power input (10 VDC to 48 VDC)
      • Wide operating temperature (0 ºC to 60 °C)
    • APAX-5070
      Advantech Launches a New Modbus/TCP Remote I/O Solution (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the APAX-5070, a high-density Modbus/TCP Remote I/O solution
      • This Modbus/TCP coupler module allows any PC, controller, or HMI device that supports the Modbus/TCP protocol to easily and cost-effectively add remote I/O functionality to access data and perform read and write actions
      • The APAX-5070 is equipped with two RJ-45 ports with the same IP address which can build daisy chains to connect remote I/O devices directly without an additional Ethernet switch
    • UNO-1019
      RISC-grade DIN-Rail PC with Windows CE 4.2 embedded OS, which simplifies application development (+)

      Features:

      32443.jpg
      • Provides versatile I/O interfaces: 2 Ethernet ports, 4 serial ports, 4 digital I/O, and one CF expansion slot for data buffering and storage
      • Operating temperature range of 0 ºC to +70°C
      • Small size and lightweight design allows it to be installed in tight industrial environments
    • EKI-6311GN
      Advantech Introduces an 802.11n Wireless Access Point for High-Speed Transmissions (+)

      Features:

      46262.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-6311GN, an IEEE 802.11n industrial wireless access point. The EKI-6311GN delivers three times the throughput rates of a normal 802.11g. It is fully backward compatible with legacy 802.11b/g frequencies. With the support of STP, WMM, and IGMP snooping protocols, the EKI-6311GN effectively improves the reliability of wireless connectivity. The EKI-6311GN can achieve data rates up to 150Mbps, which allows high-speed internet access with various data and network video surveillance transmissions. It provides 600mW high output power for long-range deployment up to 5km. Also, a Power over Ethernet injector enables a unified supply of data and power through a standard Ethernet cable. To maximize wireless network security and privacy, the EKI-6311GN incorporates 64/128/152-bit WEP data encryption, WPA, WPA2, 802.1x, which can filter external user and prevent illegal attacking. Some other EKI-6311GN features include, embedded 8dBi directional antenna with external N-type connector, wide operating temperature range (-20 ~ 70°C), and IP55 waterproof certification. [...]
    • TPC-870H
      8-inch VGA TFT LCD touch panel computer (+)

      Features:

      37618.jpg
      • The TPC-870H is designed with an Intel Celeron M 1 GHz fanless processor with low power consumption
      • Its spindle-free storage makes the TPC-870H a durable and reliable platform
      • For applications where spindle-free storage is not critical, a fast-access HDD module can be used
    • UNO-2171
      An Intel Pentium M Embedded Automation Controller (+)

      Features:

      32693.jpg
      • Features Pentium M 1.4 GHz CPU
      • Includes two RS-232 ports, two RS-232/422/485 with automatic RS-485 data flow control ports, two 10/100 Ethernet ports, two USB 2.0 ports and PC/104-Plus expansion
      • Operating temperature range of -20 °C to 65 °C (-4 to 149 °F)
    • TPC-120H
      XScale PXA 12.1" SVGA TFT Touch Panel Computer (+)

      Features:

      33259.jpg
      • Supports two 10/100BASE-T Ethernet ports
      • Comes bundled with Windows CE operating system to support thin-client solutions
      • Resolution of 800 x 600
    • PCI-1739U
      A 48-channel digital I/O universal PCI card for both 3.3 V and 5 V PCI bus signaling (+)

      Features:

      32668.jpg
      • Uses popular Opto-22 compatible 50-pin connectors for interfacing to many signal conditioning and termination options
      • Features an interrupt function that can output a digital signal synchronized with an internal PC interrupt generated by the card
      • Other features include software configurable digital I/O channels, 0 to 65 °C operating temperature, and digital output status read-back
    • MIC-3321 Series
      Direct-soldered CPU CompactPCI cards (+)

      Features:

      32315.jpg
      • Single and double layer 3U engineered for high performance and reliability in critical applications
      • Mobile Pentium M 760 2.0 GHz processor
      • Flexible integration with 915GM chipset and ICH6 I/O controller hub
    • ADAM-5550KW
      Programmable Automation Controller (PAC) designed for control tasks that require the features of both PLCs and industrial PCs (+)

      Features:

      • The ADAM-5550KW utilizes the AMD Geode GX533 CPU along with control-specific features such as a watchdog timer, battery backup RAM, and deterministic I/O
      • The ADAM-5550KW combines IEC61131-3 programming languages and Windows CE 5.0, allowing users to develop strategies using a familiar programming language
      • Has a list of useful I/O capabilities, including a local VGA port for convenient HMI functionality, two Ethernet ports, and two USB ports, as well as comprehensive software [...]
    • Fanless PCs w/SATA
      High-performance fanless box PCs (UNO-2170, 2171, and 2176 series) and PCI-based Fanless Box PCs (UNO-3072 and UNO-3074 series) support the SATA interface (+)

      Features:

      • Compared to the older PATA communication interface, SATA supports faster data transmissions and provides more reliable serial communications
      • Robust design with power isolation and thermal resistant solutions achieved through special power circuits that keep the system ground apart from the chassis ground, enhancing isolation from external electrical interference and also providing higher system reliability
      • Advantech's Fanless Box PCs are designed with strict thermal testing criteria, which ensures the system will operate at a stable temperature, even when the CPU is under 100% load [...]
    • MIC-3723
      16-bit, 8-channel non-isolated analog output card (+)

      Features:

      • 3U CompactPCI 16-bit 8-channel non-isolated analog output card
      • Each analog output channel is equipped with a 16-bit double-buffered DAC and features an auto-calibration function and BoardID switch
      • The MIC-3723 is a plug & play device that fully complies with the PCI specification Rev 2.2
  • Avnet Electronics Marketing  (1)
    • ATCA Carrier Cards
      AdvancedTCA carrier cards for integrating CompactPCI and Compact Packet-Switching Backplane (cPSB) cards into an AdvancedTCA environment (+)

      Features:

      • Entry-level AdvancedTCA Base Interface carrier card provides interconnection to the PICMG 3.0-compliant data transport section, 10/100/1000Base-Tx fabric data interconnectivity in a dual star configuration, and an onboard IPMI controller
      • AdvancedTCA Full Mesh carrier card provides complete fabric interface connectivity for any CompactPCI boards,
      • Onboard Gigabit Ethernet switch with full mesh connectivity and alternate topologies including dual star, dual dual star, and limited meshes
  • ATTO Technology, Inc.  (4)
    • ATTO Celerity FC-24XS/FC-41XS Storage Ad
      The ATTO Celerity FC-42XS and FC-41XS Storage Adapters are the next generation of ATTO's advanced storage connectivity solutions, leveraging the latest in data delivering technology – 4-Gigabit Fibre Channel. With speeds of up to 800 MB/sec per channel, these products are capable of supporting the most data-intensive applications such as digital content creation, tape streaming, backup, rich content delivery and complex database environments. Additionally, they leverage existing Celerity FC software and hardware architectures, allowing ATTO to deliver cutting-edge performance with top-notch quality and design stability. The Celerity FC-42XS is a dual-channel storage adapter, providing port density for Enterprise server and workstation applications. The Celerity FC-41XS is a single-channel storage adapter for high-performance, cost-effective connectivity for client and server applications alike. Both products offer full 2-Gigabit performance as well as full backward compatibility with existing 2-Gb and 1-Gb Fibre Channel infrastructure, protecting existing technology investments. (+)

      Features:

      • 4-Gigabit Fibre Channel Storage Adapter
      • Data transfer rates of up to 800MB/sec per channel in full-duplex mode
      • On demand, automatic negotiation between 4-Gb, 2 Gb and 1-Gb Fibre Channel
    • ATTO Celerity FC-24XL Storage Adapter
      The ATTO Celerity FC-24XL quad-channel Fibre Channel Storage Adapter offers four independent channels of 2-Gigabit Fibre Channel connectivity making it versatile for embedded and edge device designs. Building upon ATTO's industry-leading hardware design capabilities, the Celerity FC-24XL can be used for basic connectivity and as an advanced platform for intelligence and scalability. At the heart of the Celerity FC-24XL is the Integrated Offload and Processing Center (IOPC). Using an Intel XScale® processor core and an internal 133MHz PCI-X data bus for top performance and low latency, the FC-24XL IOPC can be adapted to perform a variety of high-value functions that take advantage of onboard buffering and processing, including direct port-to-port transfers, data stream manipulation, offload processing, video handling and other custom advanced functions. (+)

      Features:

      21852.jpg
      • Data transfer rates of up to 400MB/sec per channel in full-duplex mode
      • Supports up to four pluggable optical LC SFP connectors
      • Quad channel 2-Gigabit Fibre Channel storage adapter
    • Celerity Family 4-Gb
      4 Gb Fibre Channel host adapter (+)

      Features:

      23730.jpg
      • Utilizes next generation storage connectivity technology
      • Available in 4 Gb single channel (FC-41XS), dual channel (FC-42XS, FC-42ES), and quad channel (FC-44ES)
      • Features ATTO's Advanced Data Streaming Technology (ADS) for I/O performance
    • ATTO Celerity FC-22XH Storage Adapter
      The ATTO Celerity FC-22XH Storage Adapter provides high performance and reliability through award-winning hardware design. This dual-channel storage adapter uses embedded hub technology that provides four external connections from two independent Fibre Channel ports, allowing the adapter to be used as a standard dual-channel product, or you can take advantage of the extra ports to increase the number of available connections per expansion slots, decreasing cost of connectivity. Meeting tomorrow's connectivity needs today, these unique hardware features extend the capabilities of other SAN software and hardware, relieving them of data management burdens, reducing the need for Fibre Channel hubs, simplifying fabric design and reducing hardware costs. (+)

      Features:

      21854.jpg
      • 64-bit/133 MHz PCI-X with backward compatibility
      • Data transfer rates of up to 400MB/sec per channel in full-duplex mode
      • Supports up to four pluggable optical LC SFP connectors
  • Intel-Quark  (1)
    • Microcontroller Developer Kit D2000
      The newest Intel® Quark™ microcontroller D2000 is a low power, battery-operated, 32-bit microcontroller with a robust instruction set. It enables scalability and interoperability on one x86 architecture from the edge to the data center. The D2000 includes integrated device level security and access to Intel’s vast ecosystem and development toolset. Intel®, enabling your full end-to-end IoT story. [...] (+)

      Features:

      343028283861785121.jpg
  • American Portwell Technology  (1)
    • AREMO-4196
      19˝ 4U industrial rack-mount chassis that includes a flexible 14-slot backplane (+)

      Features:

      • Four front access ports for USB, three 5.25˝ drive bays for RAID or optical drives, two internal 3.5˝ drives for HDD, and an optional redundant power supply
      • Aimed at system integrators and OEMs
      • Washable air filter is easy to detach for maintenance and/or replacement
  • Quanmax  (1)
    • UbiQ-100 Series
      UbiQ-100 Series is a fanless IoT gateway integrating Intel® BayTrail Atom™ E3815/E3825 / Celeron® N2930 SoC Processor into a small footprint. Combining two GbE LAN ports and two mPCIe slots for wireless expansion, it enables flexible connections between edge devices and data center through the wired or wireless networks. (+)

      Features:

      341878748132648226.jpg
      • Intel® BayTrail SoC Processor, Atomâ„¢ E3815/E3825 / Celeron® N2930
      • 2GB/4GB DDR3L 1600 memory onboard
      • 16GB/32GB eMMC onboard, 1x Micro SD Card Cage for storgae
  • One Stop Systems Inc.  (2)
    • 3U Carrier-Class NEBS-3 Server
      3U Carrier-Class Rack-mount Server (+)

      Features:

      • High-speed quad core processors, designed specifically for the demanding Central Office and data center environment
      • 3U high by 20 inches deep
      • Can withstand extreme heat, humidity, altitude, and zone 4 earthquake shocks
    • 3U Server
      A 3U rackmount server for enterprise/data center and military applications (+)

      Features:

      • Dual Intel Xeon processors at 3.06 GHz
      • Motherboard supports six full-length PCI boards (two 32-bit/33-MHz PCI and four 64-bit/100-MHz PCI-X) and one AGP video board
      • 320W ATX power supply
  • Total Phase  (1)
    • Data Center 3.5
      The Data Center Software is a free bus monitoring software that captures and displays USB, I2C, and SPI bus data in real-time (+)

      Features:

      • Class-level Decoding: Class-level decoding takes low-level USB data captured by the software and translates it into a human-readable format in true real-time
      • The software also features a class-level filter, and supports Human Interface Device (HID), Mass Storage, Hub, and Audio classes
      • Descriptor parsing - True real-time descriptor parsing is available to users of the Beagle USB 12 protocol analyzer and the Beagle 480 analyzer [...]
  • NMS Communications Corporation  (1)
    • Vision Video Gateway
      Supports real-time bidirectional streaming of video sessions between 3G-324M-enabled mobile phones and multiple IP-based mobile video applications (+)

      Features:

      • Bridge video services between mobile networks supporting 3G-324M and broadband SIP/IP networks
      • High-performance, low latency support for real-time conversational and interactive services
      • Seamless integration with the separately available Vision Video Transcoder to support transcoding between heterogeneous video and audio codec environments
  • FCI  (1)
    • EyeMax
      4X and 12X high-speed serial I/O link (+)

      Features:

      • Part of FCI cable assembly program
      • Provides high-speed, serial copper links for industry-standard applications including linking servers, storage, computers, switches and other data network or communications devices
      • Low-cost alternative to traditional fiber optics
06/23/21 23:47
Close

Subscribe to Cloud updates