Cloud

Showing results for: virtual private network
Refine Cloud companies and products:
cloud the cloud the intercloud cloud engineering green computing cloud collaboration web operating system mobile cloud computing data center shared services platform virtualization shared infrastructure gateway software autonomic computing mainframe computing client-server model grid computing utility computing application programming interface device/location independence multi-tenancy centralization peak-load capacity virtual private network opennebula eucalyptus infrastructure as a service iaas software as a service saas platform as a service paas solution stack thin clients computing resources level of abstraction information technology aws kpemmaraju infrastructure convergence converged infrastructure
Click on any vendor
to see a listing of
virtual private network related products.
  • ACT/Technico  (1)
    • Removable RAIDStor
      A hot-swappable 6U, single-slot RAIDStor with a removable network-attached storage module at the board level (+)

      Features:

      24931.jpg
      • Ideal for a variety of embedded applications requiring highly available and redundant blade level storage, including embedded file servers, boot servers, VoIP, and NAS embedded storage using a network file system
      • PICMG 2.16 CompactPCI Packet Switched Backplane (cPSB) compatible and deployable in a VME64x system via VITA 31.1 backplane with one or two 2.16 node slots
      • Automatic fail over, drive-to-drive or blade-to-blade and drive level front-panel hot swap
  • Advantech Corporation  (2)
    • EIS-D110 - Entry Level Edge Intelligence Server
      Advantech designs and manufactures a broad selection of embedded boards and has recently positioned itself as a leading IoT solution provider specializing in edge computing. The EIS is a new form of IoT gateway offering combination of fanless PC and Advantech WISE-Pass (Platform as Service) software solutions as well as Microsoft Azure cloud services into a single computing platform to provide data communication and management between local sensors and private/public cloud for IoT applications. Advantech's EIS-D110 uses ARK-1123H plus Hardware (RAM, wifi, SSD) with embedded software (WES7, WISE-PAAS) and features ready to run fanless PC with pre-configured Advantech WISE-Pass SW in a regular Advantech OEM packaging. (+)

      Features:

      366092117622671433.jpg
      • Integrated hardware plus software to build up edge-to-cloud applications
      • Pre-configured system: Intel® Celeron® J1900 SoC, WES7E/Win 10 Enterprise with 4GB Memory, 64 GB SSD and wireless networking
      • Pre-integrated WISE-PaaS Software Package: WISE-PaaS/RMM, WISEPaaS/OTA, WISE-PaaS/Security, WebAccess/SCADA, WebAccess/IMM and WebAccess/HMI
    • EIS-D110 – Edge Intelligence Server
      This powerful and complete IoT gateway starter kit empowers your IoT project with a reliable platform and open gateway technologies. The package includes a ready-to-run fanless automation system (Intel® Celeron® J1900 platform & Windows® 7 Embedded), IoT platform software, development kit and technical support service. Also included is Microsoft® Azure® service integration to provide data communication and management between local sensors and private/public cloud for IoT applications. (+)

      Features:

      3672114698611778632.jpg
      • Integrated hardware plus software to build up edge-to-cloud applications
      • Pre-configured system: Intel® Celeron® J1900 SoC, WES7E/Win 10 Enterprise with 4GB Memory, 64 GB SSD and wireless networking
      • Pre-integrated WISE-PaaS Software Package: WISE-PaaS/RMM, WISEPaaS/OTA, WISE-PaaS/Security, WebAccess/SCADA, WebAccess/IMM and WebAccess/HMI
  • Arrayent  (1)
    • Internet-Connect Wi-Fi Tool Kit
      Product install with Network Address Translation (NAT) tunneling (+)

      Features:

      46223.jpg
      • Cloud servers offload tasks and hardware bill of materials cost
      • Cloud-based apps help reduce field upgrades on devices
      • The tool kit runs on a Microchip Explorer 16 development kit for evaluation [...]
  • Artesyn Embedded Technologies  (5)
    • Centellis® Security Edition (SE) Platfor
      Based on Clavister security applications and powered by Artesyn bladed platforms, Centellis SE offers virtualized security for wireless networks. It offers excellent performance (e.g. 70 Gbps IPSEC termination per blade), resource efficiency and powerful security features. Its minimal footprint and extremely low resource requirements make the Centellis SE an optimal solution for all types of virtual and cloud-based network security solutions, allowing security to be combined with other network functions in a single node. [...] (+)

      Features:

      324287198861434612.jpg
    • Centellis Virtualization Platform (VP)
      Artesyn's Centellis® Virtualization Platform is an application virtualization hardware/software platform architected for next generation networks based on OpenFlow for Software Defined Networking (SDN) and OpenStack for Network Function Virtualization (NFV). The platform enables service providers to run multiple virtualized applications such as firewall, DPI, security, or session border controller on a single hardware platform saving both capital expense and operating expense by eliminating the need for multiple application-specific hardware platforms. (+)

      Features:

      293454581861813038.jpg
      • Software framework based on industry standard OpenFlow and OpenStack software stacks ensures interoperability and a multi-vendor ecosystem of Virtual Network Functions (VNFs)
      • Implementation of the Intel® Accelerated DPDK ensures performance is optimized for the hardware and virtualized environment
      • Open ATCA hardware architecture ensures a multi-vendor payload ecosystem combined with the scalability and maintainability of a bladed architecture
    • Centellis 2000
      The Centellis 2000 compact AdvancedTCA platform provides the architectural benefits of larger systems for central office and data center requirements (+)

      Features:

      34137.jpg
      • 3U, 19" chassis with two horizontal blade slots
      • Scalable reliability for central office and data center environments
      • Front-to-rear cooling
    • ATCA-7365
      Server blade that delivers a combination of performance and flexibility to help drive the successful implementation of next-generation telecom networks and communication infrastructures (+)

      Features:

      47212.jpg
      • With two 6-core Intel Xeon processors L5638 and 96GB of main memory, the ATCA-7365 processor blade enables best-in-class compute performance in an ATCA form factor
      • The PICMG 3.1 compliant fabric interface provides 10 Gigabit Ethernet (10Gbps) capability for applications requiring higher network throughput in the backplane
      • Multiple network and storage I/O interfaces allow the integration into different network infrastructures such as telecommunication central offices and network data centers
    • Centellis ATCA Platforms
      Emerson has been supplying integrated, application-ready ATCA® systems under the Centellis™ name for over 10 years. Our unrivalled experience and expertise is why research reports that Emerson has the largest installed base of ATCA systems. Our Centellis systems include 2-slot, 6-slot and 14-slot variants designed to meet the needs of both central office and network data center deployments. Target applications include military communications, ship-based network datacenters, command center equipment, server platform for electronic warfare, surveillance and security infrastructure, data processing and logging. Emerson ATCA equipment mounted in shock-isolated racks was used by a US military contractor in afloat shock testing (better known as Class A barge testing). The US Navy has also run an operational ATCA system in a shock-isolated rack to simulate the effects of a barge test. The success of these tests clearly demonstrates the inherent ruggedness of ATCA equipment operating in battle ready operations. FEATURES: 1, 10G and 40G systems with 2-, 6- or 14-slots Best-in-class cooling, exceeding CP-TA B.4 thermal specification AC or DC power input options Up to 350 Watts/blade power distribution Designed for NEBS/ETSI or network datacenter [...] (+)

      Features:

  • BAE Systems  (1)
    • CsLEOS OS
      A layered, embedded operating system, certifiable to the highest aviation industry reliability standards (+)

      Features:

      • Uses the industry-standard ARINC-653 application programming interface to implement brick-wall time and space partitioning
      • Fully documented for, and certifiable to DO-178B, Level A, for safety-of-life applications
      • Multiple channel synchronization
  • Cavium Networks  (2)
    • LiquidSecurity HSM Family
      LiquidSecurity Hardware Security Module Family is a FIPS 140-2 level 2 and level 3 certified solution that provides elastic and centralized key management and key operation functionality (+)

      Features:

      306582432861706227.jpg
      • 32 partitioned HSMs in a single physical HSM, 50,000 key store independent of key size, 35,000 2048b RSA ops/sec and chaining of up to 20 Appliances
      • addresses requirements from few hundred RSA ops/sec or few key stores to 700K RSA ops/sec or 1M key store
      • Available as a PCI Express adapter with complete software or a network HSM appliance
    • LiquidIO® Server Adapters
      LiquidIO Server Adapter family enables data centers to rapidly deploy high performance SDN applications for both installed and new infrastructure while clearly enhancing server utilization, response times and network agility. This product family, in a standard server compliant half-height PCI Express form-factor, provides a proven, high-performance, general-purpose programmable adapter platform that enables cloud service providers to offload any functionality in Data Center. (+)

      Features:

      321823351871199124.jpg
      • Supports VXLAN, NVGRE, STT, IPsec and custom overlay stacks
      • Supports Open vSwitch, Openow compatible
      • Integrated networking and System I/O: 10 GbE, PCIe Gen2
  • CENTRI Technology  (1)
    • CENTRI IoTAS
      CENTRI Internet of Things Advanced Security – IoTAS, is a platform enabling developers to easily implement private data encryption and optimization into their products and services. IoTAS is embedded on endpoints, applications, network servers and the Cloud to secure and compress all data in motion and at rest. IoTAS operates in cache memory resulting in 20% less CPU utilization, less heat and less use of power with IoT devices. (+)

      Features:

      355226784248369751.jpg
      • Data Protection - Encrypts all IoT data in transit and at rest
      • Data Optimization - Compresses the IoT data up to 80% to save bandwidth and Cloud storage costs
      • Data & Device Integrity - Ensures authentication of all trusted IoT devices to mitigate impersonation and DDoS attacks
  • Innominate  (1)
    • mGuard Secure Cloud Ecosystem
      The mGuard Secure Cloud offers both operators and machine and plant engineering companies a turnkey VPN ecosystem for industrial remote services. Set up in just a few steps, the revolutionary easy-to-use Web interface allows service staffs fast and highly secure access to machines, IPCs and Industrial Control Systems. Also without IT knowledge, secure remote services can be performed at any time and any place. The mGuard Secure Cloud is available as a hosted service and in the form of an 19" appliance to operate in private data center. [...] (+)

      Features:

      286879585861469079.jpg
  • Interphase Corporation  (1)
    • iSPAN 3676
      AdvancedMC ATM OC-3/STM-1 Intelligent Communications Controller (+)

      Features:

      32653.jpg
      • Suitable for high availability, high bandwidth access applications, including Serving GPRS Service Nodes (SGSN), media servers, video conferencing applications, ATM signaling monitors, and other applications that require the Quality of Service (QoS) guarantees provided by ATM
      • For use in AdvancedTCA and MicroTCA platforms
      • Dual OC-3/STM-1 interfaces via multimode or single mode SFP optics for operation in a dual active or 1+1 with automatic protection switching (APS) in hardware
  • LynuxWorks, Inc.  (1)
    • Application Platform 2.0 on LynxSecure
      To make cloud computing more secure, the TransLattice Application Platform 2.0 was ported onto the latest version of the LynxSecure separation kernel and hypervisor (+)

      Features:

      • Essentially LynuxWorks takes the concept of partitioning, which isolates individual applications into separate partitions so they are protected if another application is hit by a form of malware
      • The attacks are limited to a single partition
      • Communication between each partition is controlled by policies set by the system administrator and secured via another LynuxWorks tool called “LynxSecure,â€? which enables multiple guest operating systems and their applications to run securely on a single platform
  • Microchip Technology, Inc.  (1)
    • AWS-ECC508
      Microchip’s AWS-ECC508 chip enables easy onboarding and mutual authentication with AWS IoT for a faster, easier, and more secure connection to the cloud. Compatible with the microcontroller of your choice, the AWS-ECC508 is small enough to be added to virtually any board, making it usable in nearly every product. The AWS-ECC508 comes pre-loaded with a private key corresponding to an AWS account, simplifying the provisioning process, as well as built-in resistance to physical tampering. (+)

      Features:

      3686255565712172854.jpg
      • Internally generates a verifiable and trusted identity that ties in with AWS’ mutual authentication security model and streamlines provisioning [...]
  • NEI  (1)
    • N-2170
      NEBS Level 3 certified carrier-grade rack mount server based on Dell PowerEdge technology with integrated GE packet processing technology for network security applications (+)

      Features:

      46555.jpg
      • This DC-powered 2U carrier grade platform contains GE OCTEON-based PCIe IP packet processor cards designed to perform DPI for security gateway applications such as content inspection, data security encryption/decryption (SSL/IPSec/TLS), network monitoring, lawful interception and traffic management
      • Dual socket support for Intel Xeon 5600 Series 6-core processors and combines high performance with power efficiency to deliver improved performance-per-watt over previous generation rack-mount servers
      • This rugged server is designed for demanding telco CO environments, network data centers, and enterprise networks
  • Netronome  (1)
    • NFP-32xx
      The NFP32xx is the industry's first processor designed for unified computing architectures,combining high performance network,content and security processing with I/O virtualization (+)

      Features:

      43994.jpg
      • High-Performance: Powered by 40 multi-threaded programmable networking cores running at 1.4 GHz, the NFP delivers over 56 billion instructions per second with 320 hardware threads that optimize memory utilization – allowing for 1800 instructions per packet at 30 million packets per second
      • This enables 40 Gbps of L2-L7 deep packet processing with line-rate security and I/O virtualization for millions of simultaneous flows
      • Power efficiency: Operating at only 15 to 35 watts, the NFP-32xx revolutionizes green computing by delivering more than four times the power efficiency of its closest competitor
  • Odin TeleSystems Inc.  (5)
    • Balder-8U-PCI
      Network interface card features an 8 x ISDN BRI U network interface for the PCI and CompactPCI bus (+)

      Features:

      • Daughter module support for application specific module and SBC
      • Complies with computer telephony bus H.100/H.110
      • Supports the OTX software architecture and the OTX application programming interface [...]
    • Vidar-6x3
      Odin Network Interface Card (NIC) network interface for the PCI and CompactPCI bus (+)

      Features:

      • Daughter module support for application specific module
      • Complies with computer telephony bus H.100/H.110
      • Supports the OTX Software Architecture and the OTX application programming Interface (API)
    • Balder-8S-PCI
      Odin Network Interface Card (NIC) features an 8 x ISDN BRI S/T network interface for the PCI and CompactPCI bus (+)

      Features:

      • Daughter module support for application specific module and SBC
      • Complies with computer telephony bus H.100/H.110
      • Supports the OTX Software Architecture and the OTX Application Programming Interface (API) [...]
    • Vidar-5x16
      Odin Network Interface Card (NIC) network interface for the PCI and CompactPCI bus (+)

      Features:

      • Daughter module support for application specific module
      • Complies with computer telephony bus H.100/H.110
      • Supports the OTX software architecture and the OTX Application Programming Interface (API)
    • Arni-32
      Odin Network Interface Card (NIC) features a 32 x phone/fax/modem network interface for the PCI and CompactPCI bus (+)

      Features:

      • Daughter module support for application-specific module and SBC
      • Complies with computer telephony bus H.100/H.110
      • Supports the OTX Software Architecture and the OTX Application Programming Interface (API)
  • PeerApp  (1)
    • UltraBand Series
      UltraBand optimizes delivery of Internet video services, file sharing applications, software distribution services and web browsing – virtually any service or application that consists of bandwidth-consuming large objects or of numerous small objects that delay page downloads. UltraBand is focused on resolving congestion while meeting subscribers’ demand for content and for delay-free web browsing. UltraBand can be implemented on its own or as part of an edge caching layer that serves both unmanaged OTT and managed CDN traffic. UltraBand 6000 is PeerApp’s newest generation transparent caching solution, featuring unprecedented scalability and performance along with a unique new policy engine that gives operators ultimate control over caching resources. FEATURES: Dramatic Quality of Experience (QoE) Improvement – Accelerates streaming and download content by 4-10x for flawless media delivery. Companion UBWeb™ accelerates web page load times by for a delay-free web browsing experience. Network Cost Savings –Offloads up to 40% of network traffic to reduce costs of IP transit bandwidth and infrastructure upgrades. Broadest Content Support – Concurrently caches a wide and growing set of services including adaptive bit rate (ABR) video, flash, streaming video, web-based and peer-to-peer file sharing, software update services, mobile-specific services and HTTP downloads. Cache Policy Engine – UltraBand 6000 features a unique cache policy engine that identifies a number of pre-defined content “classes� with associated delivery attributes and requirements. Operators can control the way in which caching and system port resources are allocated among the different content classes. Transparency / Legal Compliance – Full transparency preserves application logic for HTTP services and peer-to-peer networks. UltraBand fully complies with the procedural “safe harbor� provisions set by US (DMCA 1998) and EU laws. Operational Simplicity – UltraBand dynamically processes all supported services and applications, eliminating the need to predict which services will drive the most content and statically allocate capacity to them. Scalability – Configurations range from entry-level UltraBand SP appliance systems to UltraBand grid systems with the highest caching capacities available in the industry. High Availability – Clustered system architecture has no single point of failure. Interface to the existing network is architected to ensure that network traffic is not interrupted even in the event of a caching system failure. Commercial, Carrier-Grade Hardware Platforms – Available on pre-configured rack-mount servers with internal storage or external grid storage arrays, sized to match specified forwarding capacity. [...] (+)

      Features:

  • Phoenix Contact  (1)
    • TC mGuard
      Phoenix Contact’s new TC mGuard devices leverage cellular networks, such as Verizon and AT&T, to provide secure remote communications wherever a wired connection is not possible. The TC mGuard meets the demand for remote maintenance and secure supervisory control and data acquisition (SCADA), two growing needs in today’s connected industrial world. (+)

      Features:

      323685150769394189.jpg
      • TC mGuard connects through Phoenix Contact’s free mGuard Secure Cloud service
      • The combination of cellular networks and a virtual private network (VPN) ensures a secure solution for remote maintenance and support
      • Active firewall
  • Sensinode Ltd.  (1)
    • NanoService Platform
      The NanoService Platform enables deployment of challenging M2M applications on server and private/public cloud environments. It provides a directory and semantic lookup of all M2M nodes and resources in the system, provides transparent proxy services between the large-resource traditional Internet and constrained-resource protocols, and supports an eventing model that is critical to the effectiveness of Embedded Web applications. Reference Applications and Java SDKs with source code, along with device libraries, decrease time to market for both M2M device and Web Apps. (+)

      Features:

      • Directory and semantic lookup of M2M nodes, resources
      • Transparent proxy between Internet, constrained nodes
      • Supports up to 20M nodes, 100M transactions/day per cluster
  • SHUNRA Software Ltd.  (1)
    • Cloud
      A WAN simulator (+)

      Features:

      • Full user control over emulated WAN pipe
      • Real-time, real connection performance playback and recording
      • Ethernet cards for LAN interface
  • TeamF1, Inc  (1)
    • Secured Gateway
      Turnkey-solution for Virtual Private Network (VPN) and Unified Threat Management (UTM) gateways is a fully-managed solution providing a web management interface GUI, a powerful command line interface (CLI), and an SNMP interface for remote management (+)

      Features:

      33638.jpg
      • Provides a rock-solid router platform that acts as a gateway between one or more WAN interfaces of different types and multiple LAN/ WLAN interface
      • Includes a variety of filtering modules such as a firewall, NAT, IDS, or IPsec VPN
      • The GUI management capability also includes device administration features such as upgrade capability, traffic monitoring, and logging [...]
  • Thales Computers  (1)
    • PowerNode3
      First dual 1-GHz PPC CPU board at 30W (+)

      Features:

      19031.jpg
      • Single/dual PowerPC G4 high-performance computing node
      • Enhanced connectivity, reduced power consumption
      • Draws only 30W (in dual CPV configurator) vs. 60W for competitive brands
  • Themis Computer  (2)
    • Hyper-Unity
      Hyper-Unity is the only hyper-converged infrastructure platform for the tactical edge. IoT engineers can process high volumes of real-time data with (+)

      Features:

      3688689778619592236.jpg
      • Inter-node and intra-cluster traffic runs at 56 Gbps.
      • Multiple storage and GPGPU computing options offer maximum flexibility
      • All resources are pre-integrated; increasing productivity, cutting costs by 50 percent or more
    • RES-NT2 1U AND 3U GRID HIGH PERFORMANCE COMPUTERS
      The Themis RES-NT2 GRID HPCS combine up to three NVIDIA® GRID K1 OR K2 GPU, two Intel E5 2600, four, six, or eight core Xeon processors with up to 512 GB of DDR3 memory, and advanced thermal and kinetic management design in a ruggedized 1U or 3U form factor. NVIDIA GRID™ technology offers the ability to offload graphics processing from the CPU to the GPU in virtualized environments. This enables the data center manager the freedom to deliver true PC graphics-rich experiences to more virtual users for the first time. The RES-NT2 GRID HPC provides full compatibility with popular virtualization technologies and is designed for use in demanding environments where Size, Weight, and Power (SWAP) are severely limited. The RES-NT2 GRID HPC brings graphics-accelerated virtual workstations, desktops, and applications to mission-critical military, industrial, and commercial applications. The RES-NT2 HPC server design incorporates superior resilience to environmental extremes that include shock, vibration, and temperature extremes to keep mission-critical applications available, improve life-cycle management, and reduce the total cost of ownership. FEATURES: Up to three NVIDIA® GRIDTM K1 or K2 GPU computing accelerators Two Intel E5 2600 series, four, six, or eight core Xeon processors Height: 1U or 3U Width: 17.06 inches Depth: 20 or 25 inches Weight: 20-45 pounds Reliable in harsh operating environments Corrosion resistant aluminum and stainless steel reinforcement for strength and stiffness Modular design for easy upgrade and service Optional rack-mount slides Front-to-rear airflow direction Supports popular virtualization technologies IPMI v2.0 support Operating shock: 3 axis, 30G, 25ms Operating vibration: 2.0 Grms, 8 Hz to 2000 Hz Operating temperature: 0°C – Up to 45°C Operating Humidity: 8% to 90% non-condensing Single or redundant 110/220 VAC MIL-STD-810G (Shock and Vibration) [...] (+)

      Features:

  • TransLattice  (1)
    • Application Platform 2.0 w/LynxSecure
      To make cloud computing more secure, TransLattice Application Platform 2.0 was ported onto the latest version of the LynxSecure separation kernel and hypervisor (+)

      Features:

      • Essentially LynuxWorks takes the concept of partitioning, which isolates individual applications into separate partitions so they are protected if another application is hit by a form of malware
      • The attacks are limited to a single partition
      • Communication between each partition is controlled by policies set by the system administrator and secured via another LynuxWorks tool called “LynxSecure,â€? which enables multiple guest operating systems and their applications to run securely on a single platform
  • VeloCloud  (1)
    • VeloCloud Service
      With VeloCloud, branch sites can now achieve fast, resilient and secure application performance using even ordinary broadband links from multiple Internet providers. (+)

      Features:

      281777454402919384.jpg
      • Makes multiple broadband links behave like one reliable link
      • Service subscription
      • Visualizes cloud analytics of application performance over multiple links
  • VMware  (1)
    • VMware Zimbra 7.2
      VMware Zimbra has been updated to include support for Secure/Multipurpose Internet Mail Extensions (S/MIME) for government deployments requiring encryption, and Smartcard authentication, including support for Department of Defense (DoD) Common Access Cards (CAC). VMware Zimbra 7.2, a next-generation email, calendar and collaboration solution, provides an open platform designed for virtualization and portability across private and public clouds, making it simpler to manage and more cost-effective to scale. (+)

      Features:

      • supports Secure/Multipurpose Internet Mail Extensions (S/MIME) for government deployments requiring encryption
      • supports Smartcard authentication, including support for Department of Defense (DoD) Common Access Cards (CAC).
      • provides an open platform designed for virtualization and portability across private and public clouds
  • Western DataCom  (1)
    • IPE-10M
      A PC/104-Plus form factor high assurance Internet Protocol Security (IPSec) encryptor (+)

      Features:

      • Designed for all private and public IP internetworking environments (mobile, wireless, space, and stationary)
      • Directly interfaces with the Cisco 3200 Series of routers and provides Virtual Private Network encryption using IPSec
      • 10 Mbps secure throughput
  • Wind River Systems, Inc.  (2)
    • Wind River Simics
      Simulate anything from chip to system (+)

      Features:

      306586165861633154.jpg
      • Provides access, automation, and collabroation required for agile development
      • By simulating the end-target system, teams can reduce the dependency between software and ahrdware activities to enable agile practices and continuously deliver better software faster
      • All developers have unlimited access to virtual hardware, allowing new ways of working, advanced automation, and improved collaboration
    • Wind River Titanium Control
      Wind River Titanium Control is an on-prem cloud infrastructure for critical services and applications that improves agility and reduces operating and deployment costs. It applies proven IT technologies such as COTS hardware and the mass virtualization and cloud deployment of applications. Titanium Control delivers the high performance, high availability, flexibility, and low latency needed to reduce capital and operating expenses, as well as minimize unscheduled downtime, providing high reliability for industrial applications and services deployed at the network edge. (+)

      Features:

      3684345898617820272.jpg
      • Combines technologies like OpenStack and KVM with data plane acceleration and VM management services
      • Unlike enterprise IT virtualization platforms, it provides high reliability for applications and services deployed at the network edge, for example in fog deployments. [...]
10/1/20 10:18
Close

Subscribe to Cloud updates