DSP

Showing results for: digital signal processin
Refine DSP companies and products:
dsp digital signal processor digital signal processing dsp engine radar digital signal processing dsp software dsp hardware dsp system dsp systems radar signal processor digital signal processors discontinuous signal digital signal processin a/d d/a
Click on any vendor
to see a listing of
digital signal processin related products.
  • Sheldon Instruments  (1)
    • SI-C6713DSP-PMC
      Enables adding real-time signal processing capabilities (+)

      Features:

      • PCI Mezzanine Card (PMC) is a widely used industry standard for small-sized mezzanine modules
      • A high-performance DSP processor and graphical application development in LabVIEW
      • Suitable for real-time processing applications
  • Traquair Data Systems, Inc.  (1)
    • ORS-11x
      Multi-channel analog interfaces with a user-programmable Spartan-IIE or Virtex-II FPGA, providing developers with the means to implement FPGA-based digital signal processing solutions (+)

      Features:

      31753.jpg
      • Can be used as stand-alone devices with the user-programmable FPGA responsible for supporting all signal processing functionality, or as daughtercards to micro-line DSP/FPGA boards
      • A variety of multi-channel A/D/A configurations are supported: 2-channel 14-bit A/D/A with ADC sample rates up to 65 MSps; 4-channel 16-bit A/D/A with ADC sample rates up to 2.5 MSps; 12-channel A/D/A with ADC sample rates up to 250 KSps
      • If the capabilities of a Texas Instruments TMS320C6000 DSP processor are required, an ORS-11x board can be fitted as a daughtercard to a TMS320C6000-based micro-line embedded DSP/FPGA board
  • Curtiss-Wright  (5)
    • CHAMP-AV8
      Rugged, high performance OpenVPX DSP (digital signal processing) engine based on Intel next-generation quad-core processor technology (+)

      Features:

      46882.jpg
      • High-performance floating-point processing for digital signal processing
      • (DSP) and general purpose applications
      • 6U OpenVPX-compliant
    • VPX3-453 3U VPX Virtex-6/8640D DSP
      The VPX3-453 is a high performance, small form factor DSP engine that combines a Xilinx® Virtex®-6 FPGA and a Freescale® Power Architecture MPC8640D processor. This small form-factor 3U VPX (VITA 46/48) card is ideal for SWaP-constrained environments and is designed to support the full -40 + 85 deg C rugged operating temperature range. The VPX3-453 speeds and simplifies the integration of advanced DSP and image processing into embedded systems designed for demanding Radar Processing, Signal Intelligence, ISR, Image Processing, and Electronic Warfare applications. (+)

      Features:

      217438257121131374.jpg
      • One user-programmable Xilinx Virtex-6 FPGA node (LX240T)
      • One Dual-core Freescale Power Architecture MPC8640 processor
      • On-board Gen2 PCIe switch
    • CHAMP-WB 6U OpenVPX Virtex-7 FPGA Card
      The Curtiss-Wright CHAMP-WB is a user-programmable Xilinx Virtex-7 FPGA-based computing product designed to meet the needs of challenging embedded high-performance digital signal and image processing applications. The CHAMP-WB is targeted specifically at wide-band, low latency applications that require large FPGA processing, wide input/output requirements, with minimal latency. (+)

      Features:

      226605770407897699.jpg
      • OpenVPX (VITA 65) profile MOD6-PAY-4F1Q2U2T-12.2.1-11, VPX REDI (VITA 48 option)
      • Digital Signal Processor with Single user-programmable Xilinx Virtex-7 FPGAs (X690T or X980T)
      • 8 GB DDR3L SDRAM in two banks
    • FPE650 FPGA VPX
      A quad FPGA processor card which combines high bandwidth I/O, achieved through VPX/VPX-REDI and FMC/VITA 57 sites (+)

      Features:

      36805.jpg
      • Designed for the most demanding digital signal processing applications such as electronic counter measures, signal intelligence, and electro-optics
      • Four Xilinx LXT, SXT, or FXT Virtex-5 FPGAs
      • 4x Xilinx Virtex-5 FPGAs (SX95T, LX155T, FX100T)
    • CHAMP-FX4 6U OpenVPX Virtex-7
      The CHAMP-FX4 is the flagship 6U product in Curtiss-Wright Defense Solutions’ family of user programmable Xilinx® Virtex®-7 FPGA-based computing products, designed to meet the needs of challenging embedded high performance digital signal and image processing applications. Curtiss Wright’s 4th generation 6U FPGA card, the CHAMP FX4 combines the dense processing resources of three large Xilinx Virtex-7 FPGAs with over 12 GB of memory resources, all on a rugged 6U OpenVPX (VITA 65) form factor module. (+)

      Features:

      292163107861464693.jpg
      • Over 100 GB/s of backplane I/O bandwidth
      • Gen2 Serial RapidIO (SRIO) provides standards-based connectivity to general-purpose processing boards such as the VPX6-1957 and CHAMP-AV8
      • Two FMC interfaces with 80 differential signal pairs
  • AcQ InduCom  (6)
    • VME383
      A DSP DAC for high-speed analog signal regeneration and digital signal processing (+)

      Features:

      • 6U VMEbus board
      • Four TMS320C32 floating point DSPs running at 60 MHz, delivering 30 MIPS
      • Three high-speed 16-bit D/A channels per DSP
    • CPCI381
      A 3U CompactPCI board providing a powerful platform for high-speed analog signal capturing and digital signal processing (+)

      Features:

      11141.jpg
      • TMS320C32 floating point DSP, running at 60 MHz, delivering 30 MIPS
      • Two simultaneous sampling 12-bit A/D channels
      • Programmable sampling rate up to 7.5 Msamples/sec
    • VME381
      A DSP ADC for high-speed analog signal capturing and digital signal processing (+)

      Features:

      • 6U VMEbus board
      • Four TMS320C32 DSPs, each with 2 analog input channels, running at 60 MHz, delivering 30 MIPS
      • Two simultaneous sampling 12-bit A/D channels per DSP
    • M383 DSP M-module
      Provides a powerful platform for high-speed analog signal (re) generation and digital signal processing (+)

      Features:

      • Three analog output channels share the 10 MSps output update rate
      • Local software allows enhanced and user-specific signal processing
      • Eight general-purpose digital I/Os (4x input, 4x output, TTL-compatible) are available [...]
    • M381 DSP M-module
      Provides a powerful platform for high-speed analog signal capturing and digital signal processing (+)

      Features:

      • Two analog input channels are capable of simultaneously sampling at (maximum) 7.5 MSps sampling rate
      • Local software allows enhanced and user-specific signal processing
      • Gain and offset errors are compensated by the DSP
    • CPCI383
      A 3U CompactPCI board providing a powerful platform for high-speed analog signal (re)generation and digital signal processing (+)

      Features:

      11143.jpg
      • TMS320C32 floating point DSP, running at 60 MHz, delivering 30 MIPS
      • Three high-speed, 16-bit D/A channels
      • Analog output rate is software programmable up to 7.5 Msamples/sec (using DMA, single channel)
  • XILINX, Inc.  (1)
    • Virtex-5 SXT platform
      Getting all the processing performance, memory and high-speed I/O is a never ending quest for applications heavy in digital signal processing (+)

      Features:

      32897.jpg
      • Integrating the flexibility of programmable logic makes building a processor even more challenging
      • The Xilinx Virtex-5 SXT platform establishes an industry record for DSP performance delivering 352 GMACs at 550MHz, while consuming 35 percent less dynamic power as compared to previous 90nm generation devices, and is the first DSP-optimized FPGA family to integrate serial transceivers
      • The Virtex-5 SXT platform delivers the highest ratio of DSP blocks-to-logic needed for high-performance digital signal processing applications in wireless, such as WIMAX and high-definition video, such as surveillance and broadcast
  • RF Engines Limited  (3)
    • DSP Cores for FPGA
      Signal processing cores are highly optimized FPGA designs for applications with high sample rates and demanding performance requirements (+)

      Features:

      • Guaranteed bit-true models provided with each core
      • Highly optimized implementations using pipelined architectures
      • Designs tailored to specific bit width and precision requirements
    • SpectraView™ SV900
      RF Engines' SpectraView™ SV900 system is being developed to provide a complete and cost-effective solution for performing real-time spectral analysis of very wideband analog signals. The SV900 is based around the latest high performance digitisers and powerful signal processing hardware, and can be interfaced directly to a standard personal computer. The package includes Advanced Signal Display Software (ASDS), a full-featured PC application that provides the user interface to the analysis system, with a variety of mechanisms for displaying, analysing and storing both time and frequency domain data. (+)

      Features:

      • Cost-effective spectral analysis solution
      • Extremely wideband analysis capabilities
      • Minimal setup and configuration
    • Pipelined Frequency Transform
      A specially developed architecture that is optimized for the real-time signal analysis of ultra wideband signals and transforms the signals from the time domain to the frequency domain as a Fast Fourier Transform (FFT) would do (+)

      Features:

      • Also provides high-performance filtering across hundreds of channels
      • Enables a stack of digital frequency converters or a massively parallel processed pipeline FFT to be replaced with a single chip [...]
  • ZTEC Instruments, Inc.  (15 of 21)
    • ZT100PC
      A DSP processor that provides high-speed signal acquisition and processing in a PC/104 instrument (+)

      Features:

      • 80 MHz TMS320C5X DSP
      • User interface is provided through the PC/104 bus or through the RS-232/485 serial port
      • 32 general purpose digital I/O ports
    • ZT420PXI-TMT
      PXI/CompactPCI 200MSPS Digitizer / Digital Oscilloscope (+)

      Features:

      • Ability to test both pre-defined and user defined telecom masks
      • Automated scope configuration file save and detailed examples on mask definition allow straightforward creation of specialized masks
      • Onboard DSP software allows capture of up to 1024 waveforms with microsecond duration rearm times between waveforms
    • ZT500PXI
      14-Bit Arbitrary Waveform Generator (+)

      Features:

      • 2 mVpp to 7 Vpp Programmable Output Signal Range in 2 mV Steps
      • 300 MSample/s to 40 MSample/s Programmable Sample Rate
      • 200 MHz Maximum Analog Bandwidth
    • ZT200VME
      A modular intermediate frequency (IF) processor providing IF signal detection, processing, and modulation in a 6U VMEbus instrument (+)

      Features:

      • TMS320C50 DSP provides a complete set of IF measurement and processing capabilities including magnitude/phase measurements, In-phase/Quadrature (IQ) measurements, modulation analysis, signal modulation and demodulation, error detection and correction, equalization and filtering, feedback control, and adaptive beam-forming and noise cancellation
      • Three IF inputs (100- kHz to 10 MHz adjustable frequency range)
      • 80 dB input signal dynamic range
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      9289.jpg
      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZT442PXI
      2 Channels Simultaneous Acquisition (+)

      Features:

      • 1 GSample/s Single Shot
      • Flexible Range, Offset, Coupling, Impedance, Sampling Rate, & Analog Filtering
      • 300 MHz Analog Bandwidth
    • ZT450PXI-00 -Digital-Storage Oscilloscope
      2 (PCI, PXI) or 4 (VXI) channels (+)

      Features:

      • 8-bit resolution
      • 1 GSps to 2.5 GSps single-channel interleaved sample rates
      • 500 MHz to 1 GHz max analog bandwidth
    • ZTC400SCU
      Analog input: DC to 150 MHz bandwidth (+)

      Features:

      • Analog signal range: 1V maximum
      • 500 MSamples/sec sample rate
      • 12-bit ADC resolution
    • ZT420VXI / ZT422VXI
      8-bit digitizer/digital oscilloscope, ZT420VXI: I channel, ZT422VXI: 2 channel (+)

      Features:

      • + 0.1V to + 5V programmable input signal range
      • 200 MSamples/ sec to 10 MSample/sec programmable sample rate
      • 100 MHz analog bandwidth
    • Z1428VXI
      A full featured digital storage oscilloscope for both legacy and next generation modular instrumentation systems (+)

      Features:

      16009.jpg
      • 2 channels simultaneous, 8-bit resolution
      • 1 GSps, 250 MHz analog bandwidth
      • 1 MS record length per channel
    • ZT442 family
      A family of three complete, high performance digital storage oscilloscopes (+)

      Features:

      14829.jpg
      • Two channels simultaneous full-speed
      • 1 GSample/sec single shot
      • Flexible signal processing, range, offset, coupling, impedance, sampling rate, and analog filtering
    • ZT621VXI
      Two channels simultaneous full speed (+)

      Features:

      • 1 Gsample/sec single shot
      • signal processing, range offset, coupling, impedance, sampling rate, and analog filtering
      • 300MHz analog bandwidth
    • ZT432VXI
      2 channel (PXI) or 4 channels simultaneous (VXI), 12-bit resolution (+)

      Features:

      • 200 MS/s, 90 MHz analog bandwidth
      • Up to 4 MS record length per channel
      • Programmable range, offset, coupling, impedance, sampling rate, and analog filtering
    • ZT420VXI
      A one-channel digitizer/digital oscilloscope (+)

      Features:

      10410.jpg
      • Up to 200 Msamples
      • Single-wide, C-sized VXIbus modules
      • 4 Msample memory sizes per channel
  • Spectrum Digital  (4)
    • eZdsp for TMS320VC5410
      A starter kit for the TMS320VC5410 DSP (+)

      Features:

      • TMS320VC5410 Digital Signal Processor operating at 100 MHz
      • Embedded IEEE 1149.1 JTAG scan controller
      • Interface to host PC through parallel port for debug and communications
    • eZdsp for TMS320VC33
      A starter kit for the TMS320VC33 DSP (+)

      Features:

      • TMS320VC33 Digital Signal Processor operating at 60 MHz
      • Embedded IEEE 1149.1 JTAG scan controller
      • Interface to host PC through parallel port for debug and communications
    • eZdsp for TMS320VC5402
      A starter kit for the TMS320VC5402 DSP (+)

      Features:

      • TMS320VC5402 Digital Signal Processor operating at 100 MHz from Texas Instruments
      • Embedded IEEE 1149.1 JTAG scan controller
      • Interface to host PC through parallel port for debug and communications
    • EVM320C203/F206
      A 3U 6.3 x 3.93 inch evaluation module for the TI 'C203/F206 DSPs with on-chip UART (+)

      Features:

      • Texas Instruments TMS320F206 Digital Signal Processor (20 Mips) with 32K words Flash UART on-chip
      • 64K words program and 64K words data zero wait state memory
      • 32K words on board FLASH memory
  • Hunt Engineering  (1)
    • HERON DSP Systems
      HERON high-performance modular signal processing systems for PCI-based, USB connected, and Embedded use are programmable and reconfigurable, using common APIs to provide compatibility and complete flexibility (+)

      Features:

      33502.jpg
      • Choose one or combine any number of our off-the-shelf modules
      • Modules with Xilinx Virtex FPGA (with external memory options plus digital and analog I/O choices) and TI ‘C6000 DSP
      • Mount selected modules on a HERON module carrier which provides real-time data connections with 400 Mbps possible in each direction simultaneously
  • Nuvoton Technology  (1)
    • WAU8812
      Mono audio Codec for VoIP-telephone, hands-free telephony markets; provides flexibility in performance and power consumption (+)

      Features:

      38376.jpg
      • Robust, high-fidelity, 24-bit signal architecture
      • 93dB Digital-to-Analog Converter (DAC), Signal to Noise Ratio (SNR), and 91dB Analog-to-Digital Converter (ADC) SNR at audio sampling rates from 8 KHz to 48 KHz
      • Industry-leading 6uA standby current, which greatly reduces power consumption and extends battery life in hand-held applications
  • Compel Electronics  (2)
    • Coaxial adapters for monitoring points
      For the direct type, the device is made up of three coaxial interfaces so that an input / output path for the signal in transit and a direct link for monitoring are created (+)

      Features:

      30429.jpg
      • For the uncoupled type, the device is also made up of three coaxial interfaces; the difference lies in the fact that the signal which is picked up to be monitored is uncoupled with respect to the signal in transit through the insertion of an internal resistor which has been appropriately connected
      • Sometimes there is also the need for better adaptation, from an electrical point of view, of the output port of the signal being monitored; in this case a further resistor is appropriately connected, thus obtaining an uncoupled and adapted link
      • As far as the interface coaxial connectors are concerned, the most common types used are the 1.0/2.3 and 1.6/5.6 (male or female)
    • BALUNS
      Impedance adapters allow systems with different impedance levels to be connected (+)

      Features:

      30182.jpg
      • As is well known, the best method for transmitting a signal is to transport it using means with uniform impedance: Any variation or discontinuity leads to great reflections and losses in the signal
      • In modern equipment the need often arises to connect systems with a 75 ohm output (typical in the use of coaxial cables) with systems with a 120 ohm output (typical when using twisted pairs which have been introduced because a high density of connections with cables of reduced dimensions is needed)
      • It becomes necessary, therefore, to adopt a device capable of connecting the two systems in such a way that each uses its own impedance, eliminating the possibility of having substantial losses in the signal
  • Pentek, Inc.  (15)
    • RTR 2727
      the Model RTR 2727 rugged portable recorder suitable for military and aerospace applications. The system features recording and playback of IF signals up to 700 MHz with signal bandwidths to 200 MHz. It can be configured with 500 MHz 12-bit A/Ds or 400 MHz 14-bit A/Ds and an 800 MHz 16-bit D/A. Pentek’s SystemFlow software allows turnkey operation through a graphical user interface (GUI), while the SystemFlow application programming interface (API) allows easy integration of the recording software into custom applications. (+)

      Features:

      223484716525535130.jpg
      • Designed to operate under conditions of shock and vibration
      • Portable system measuring 16.9" W x 9.5" D x 13.4" H
      • Lightweight: approximately 30 pounds
    • Cobalt 78621
      A data acquisition module for high-performance applications and part of Pentek Inc.'s Cobalt family (+)

      Features:

      • Utilizes Xilinx's Virtex®-6 FPGA family for onboard signal processing
      • Available in both XMC and PCIe formats to satisfy a range of system needs
      • Includes ruggedized XMC-format modules with extended temperature range options for deployed applications such as an unmanned aerial vehicle (UAV) collecting radar and signal intelligence data
    • Series 5300 3U VPX Software Radio Boards
      Pentek is offering 14 products in a new family of 3U VPX boards for data acquisition, software radio, and digital signal processing (+)

      Features:

      45507.jpg
      • Maximum data rates to 4 GB/sec with Gen. 2 PCIe protocol
      • Wide range of 3U VPX compact, rugged COTS solutions
      • Fabric-transparent switch enables high-speed data transfers using popular gigabit protocols
    • SigPro 1
      Small Form Factor (SFF) acquisition system that combines OpenVPX devices from Elma Electronic, Pentek, and Concurrent Technologies (+)

      Features:

      • The multivendor platform is targeted at radar, signal processing, high-speed data acquisition, and beamforming applications
      • SigPro 1 is based on the Pentek Cobalt FPGA XMC products with a high-performance analog-to-digital front end and the 803 Series 3U VPX-REDI Corei7 Single Board Computer (SBC) from Concurrent Technologies for processing functions and a storage subsystem that is based on solid-state disk from Elma
      • The new solution uses a three-slot VPX backplane in a conduction-cooled chassis and uses sealed MIL-STD DTL 38999 connectors for I/O
    • Model 71624
      The Model 71624 dual channel, 34 signal, adaptive IF (Intermediate Frequency) relay XMC with a Virtex-6 FPGA. As an IF relay, it accepts two IF analog input channels, modifies up to 34 signals, and then delivers them to two analog IF outputs. Any signal within each IF band can be independently enabled or disabled, and changed in both frequency and amplitude as it passes through the module. The Model 71624 supports many useful functions including signal drop/add/replace, frequency shifting and hopping, amplitude equalization, and bandwidth consolidation. (+)

      Features:

      308688793538844775.jpg
      • Modifies 34 IF signals between input and output
      • Up to 80 MHz IF bandwidth
      • Two 200 MHz 16-bit A/Ds
    • Cobalt 71621
      Three 16-bit, 200 MHz A/Ds, three multiband DDCs (digital downconverters), two 16-bit 800 MHz D/As with DUC (digital upconverter) and interpolator (+)

      Features:

      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Three 200 MHz 16-bit A/Ds
    • 6228
      Four-channel D/A and Digital Upconverter VIM-2 Module (+)

      Features:

      32550.jpg
      • Four 16-bit D/As with 500 MHz max. sampling rate
      • Two digital upconverters with 320 MHz sampling rate
      • 2x to 16x interpolation filters
    • Cobalt Model 71664
      The Model 71664 comes preconfigured with a suite of built-in functions for digital down conversion, data capture, synchronization, time tagging, and formatting, making them ideal turn-key interfaces for radar, communications or general data acquisition applications. IP modules for A/D acquisition, DDC, DDR3 or QDRII+ memories, programmable beamforming, controller for data clocking and synchronization, and a VRT protocol engine are all included. (+)

      Features:

      335617248561987861.jpg
      • Complete radar and software radio interface solution
      • PCIe output supports VITA 49.0 VITA Radio Transport (VRT) Standard
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
    • 7700 Series
      A family of PCI Express boards (+)

      Features:

      42422.jpg
      • Routing Flexibility Designed Specifically for Communications, Software Radio, Radar, Telemetry, and Signal Intelligence Applications
      • Gen 2 PCI Express x16 Interface
      • Latest PC and Blade Server Compatibility
    • Onyx Model 71720
      Model 71720 3-Channel 200 MHz A/D and 2-Channel 800 MHz D/A with Virtex-7 FPGA - XMC (+)

      Features:

      223485199525664546.jpg
      • Supports GateXpress FPGA-PCIe Configuration Manager
      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-7 VXT FPGAs
    • Model 7142-428 Digital Transceiver
      Digital Transceiver with Multiband DDC Core and Interpolation Filter (+)

      Features:

      • Ideally suited for military software defined radio systems that require flexible hardware capable of emulating multiple radio waveforms
      • A complete software radio system in a COTS PMC/XMC module
      • Quad DDC IP Core Combines Narrowband and Wideband Functions
    • 6229
      Dual digital upconverter and D/A VIM-2 module (+)

      Features:

      3249.jpg
      • 12-bit 200 MHz D/As
      • Low-pass or band-pass output filters
      • Translates digital signals to RF or IF frequencies up to 80 MHz
    • SystemFlow for Talon Recorders
      SystemFlow is the software interface that is integrated into every Talon recorder. The software includes the graphical user interface (GUI) that is used to control the recorder with point-and-click configuration management, a client/server communication interface, NTFS file system support and an application programming interface (API) for custom user applications and control. Signal analysis tools include a virtual oscilloscope, spectrum analyzer, and spectrogram to monitor signals before, during, and after data collection. (+)

      Features:

      3697978106213499552.jpg
      • Provides Ease-of-Use Features and Capability Improvements
      • Targets Specialized Recording Modes for Mission-Critical Applications Enhances GPS Functions for Target Triangulation and Time Stamping
      • Offers Additional Data Spectrum Display Modes
    • RTR 2623
      The RTR 2623 6 GHz RF SentinelTM Intelligent Signal Scanning portable, rugged recorder. The RTR 2623 combines and exploits the power of a Pentek Talon recording system with a fully integrated 6 GHz RF down converter. The Sentinel capability adds intelligent signal scanning with real-time signal monitoring and detection that is fully user configurable. . (+)

      Features:

      353733747621633852.jpg
      • Search and capture system using Pentek’s SentinelTM Intelligent Signal Scanner
      • Captures RF signals up to 6 GHz
      • Capture and scan bandwidths up to 40 MHz
    • RTS 2620
      The Talon® RTS 2620 combines the power of a Pentek Talon Recording System with those of an RF tuner and RF upconverter hardware plus Pentek’s Sentinel Intelligent Signal Scanner. The RTS 2620 provides SIGINT engineers the ability to scan the 6 GHz spectrum for signals of interest and monitor or record bandwidths up to 40 MHz wide once a signal band of interest is detected. (+)

      Features:

      343189075621936015.jpg
      • Search and capture system using Pentek’s Sentinel TM Intelligent Signal Scanner
      • Captures RF signals up to 6 GHz
      • Capture and scan bandwidths up to 40 MHz
  • Neff Instrument Corporation  (1)
    • Dynamic Signal Acquisition
      Individual digital signal processors complete with transducer conditioning including programmable excitation, excitation readback, and auto-identification of channel configuration; programmable gain amplifier; built-in autocalibration; programmable filter cutoff frequency; rolloff rates greater than 290 dB per octave; ADC per channel; bandwidth to 14 KHz; channel sampling rates to 37 KHz; and aggregate throughput rate to 2 Msamples/sec (+)

      Features:

      • Digital filters guarantee phase matching [...]
  • Integrated Device Technology, Inc.  (1)
    • IDT PanelPort VPP11
      Fully compliant with the DisplayPort 1.1a standard for LCD TVs, projectors and high-end monitors (+)

      Features:

      • Offers original equipment manufacturers (OEMs) an increased level of digital signal integrity by significantly reducing electromagnetic interference (EMI) on all monitor or display device interfaces by utilizing IDT spread spectrum clocking technology
      • Able to achieve this level of digital signal integrity through its unique incorporation of in-house customizable serializer/deserializer (SerDes) and industry-leading IDT serial interface technologies
      • Fully compliant with the DisplayPort 1.1a standard and allows IDT customers to connect their multimedia devices to any type and size of monitor with an external DisplayPort connection, providing them with greater display options
  • Agilent Technologies  (7)
    • COTS VME/VXS Boards
      A new family of COTS VME/VXS (VITA 41 form factor) boards combining state-of-the-art Xilinx Virtex-4 SX and FX functionalities with advanced Acqiris data conversion technology (+)

      Features:

      32078.jpg
      • Incorporates Acqiris' JetSpeed II technology for clock generation and distribution
      • Feature two Xilinx Virtex-4 FPGAs, one SX55 targeted at digital signal processing and one FX100 for data flow control
      • Provides support for the VXS interface, two optical links on the front panel, a VME64x interface as well as DDR2 SDRAM memory and auxiliary analog and digital I/Os
    • VME/VXS product fam
      The series combines state-of-the-art Xilinx Virtex-4 SX and FX functionalities with advanced Acqiris data conversion technology (+)

      Features:

      33339.jpg
      • Family incorporates Acqiris' JetSpeed II technology for clock generation and distribution, while supporting GigaSample per second (GS/s) up to date ADC and DAC technologies that offer best in class performances
      • Based on a scalable, modular architecture, the new VME/VXS boards feature two Xilinx Virtex-4 FPGAs, one SX55 targeted at digital signal processing and one FX100 for data flow control
      • Support for the VXS interface, two optical links on the front panel, a VME64x interface as well as DDR2 SDRAM memory and auxiliary analog and digital I/Os
    • E1430A
      2 pass, or subranging, 10 Msamples/sec ADC with 23 bits of resolution (+)

      Features:

      • A single-slot, single channel, C-size, VXI card that is a complete A/D module
      • Included in the module with the low distortion, low noise analog to digital converter, is flexible input signal conditioning, tunable digital filtering, an 8-Mbyte memory, and a high-speed local bus
      • Input signal conditioning includes 11 attenuation/gain ranges, AC/DC coupling and an analog anti-alias filter
    • Infiniimax 1130A
      A 1.5 GHz differential probe (+)

      Features:

      17118.jpg
      • Can be paired with Agilent's Infiniium Mixed Signal (MSO) and Digital Signal Oscilloscopes (DSO) for validating and verifying the performance of new high-speed digital product designs
      • Single-ended or differential measurements from a single probe amplifier
      • Controlled transmission-line probe heads provide a flat frequency response over the entire bandwidth specification and eliminate the distortion and loading that affects probes with in-band resonance
    • 81600
      A Infiniium DCA oscilloscope (+)

      Features:

      • TDR capability enables verification of the signal integrity of printed circuit boards, cables, and connectors that incorporate InfiniBand technology
      • Plugins are available that provide up to 80 GHz bandwidth and single-ended and differential TDR measurements [...]
    • PSA-80BW
      A wide-bandwidth, vector spectrum analyzer solution (+)

      Features:

      • Provides 80-MHz demodulation bandwidth and eight-second capture memory for multi-carrier power amplifier (MCPA), signal monitoring, radar, and satellite measurement applications
      • Up to 20 GHz frequency coverage, 0.1dB amplitude flatness, 0.7 degree phase flatness, and optional 1.2 Gbyte (768 Msamples) deep capture memory to provide eight seconds of full-bandwidth capture at the maximum sample rate
      • Well suited for error vector modulation (EVM)
    • B4655A FPGA Dynamic Probe
      For visibility into FPGA´s internal activity (+)

      Features:

      • Up to 64 internal signals for each pin dedicated to debug
      • Ability to switch internal probe points in seconds
      • Maps internal signal naming from your FPGA design tool to your logic analyzer
  • Synopsys, Inc.  (1)
    • SPW Hardware Design System (HDS)
      Fastest path from innovation into implementation for digital signal processing systems, applying a model-based design approach (+)

      Features:

      46490.jpg
      • At its core is the C Data Flow (CDF) modeling paradigm, which enables the most efficient description of digital signal processing systems which may be implemented in dedicated digital hardware or embedded software
      • SPW Hardware Design System (HDS) is a key component in the SPW product family
      • It accelerates the hardware design, verification, and analysis of complex, algorithm intensive Digital Signal Processing (DSP) systems
  • Pickering Interfaces Ltd.  (1)
    • 41-100-001
      Frequency Counter (+)

      Features:

      • Peak Power Meter
      • Time Interval Analyzer of Pulsed RF Input
      • Continuous or Pulsed RF Input Signal
  • Nikor  (1)
    • PCIDSP-5501
      High performance digital signal processing module (+)

      Features:

      20225.jpg
      • Plug&Play PCI 2.1 33MHz/32-bit slave, Master/Slave (optional) support
      • Up to 400k gates in Spartan-3 family FPGAs
      • Spartan-3 FPGAs system clock rate up to 320 MHz
  • Spectrum Signal Processing  (15 of 19)
    • TIM-SDR
      Single-channel digital radio receiver module with software demodulation libraries (+)

      Features:

      • This surveillance solution combines an A/D converter, digital down converter, TMS320C44 DSP processor, and a D/A converter on a single-wide TIM-40 module
      • Designed to work with Spectrum's LeMans VXI product [...]
    • TIM-SDR
      Single-channel digital radio receiver module with software demodulation libraries (+)

      Features:

      • This surveillance solution combines an A/D converter, digital down converter, TMS320C44 DSP processor, and a D/A converter on a single-wide TIM-40 module
      • Designed to work with Spectrum's LeMans VXI product [...]
    • Ingliston
      A quad PCI DSP system based on the 250 MHz, fixed-point 'C6202 processor (+)

      Features:

      3663.jpg
      • 2000 MIPS
      • One PMC mezzanine site
      • Two PEM Mezzanine sites
    • PEM-FPGA
      A high-performance, programmable digital interface that connects Spectrum's ‘C6000-based DSP boards to custom and standard I/O systems (+)

      Features:

      • Provides up to 100 Mbits/sec of I/O bandwidth to each ‘C6000 DSP
      • Total data throughput of 200 Mbits/sec
      • Programmed to interface to virtually any type of digital I/O devices, including digital cameras, motor controllers, and as standard and custom parallel interfaces
    • SDR-3000 SMRDP
      An "RF to Ethernet" wideband military communications (MILCOM) rapid-prototyping and development platform (+)

      Features:

      • Fully integrated, commercial-off-the-shelf (COTS) software defined radio platform
      • A “skinny” version of Spectrum's SDR-3000 MRDP providing a single-slot modem hardware solution
      • Integrates the latest Xilinx Virtex-4 Field Programmable Gate Array (FPGA) technology with Spectrum's proven MPC7410 PowerPC and TMS320C64x( digital signal processing technology
    • Smart Antenna Development Platform
      A Smart Antenna Development Platform that leverages upon the reconfigurability, flexibility, and modularity of Spectrum's flexComm solutions (+)

      Features:

      • Targeted at government and commercial users that require increased capacity, extended range, and signal enhancement to get the most out of their infrastructure investment.
      • Supports two to eight receive channels with a 10 MHz bandwidth and can scan the frequency range from 20 MHz to 3 GHz, sufficient for all military communications and cellular bands
      • Provides a direction finding example program that can determine the relative position of an incoming narrowband signal
    • flexComm SDR-4000 TMRDP
      Off-the-shelf platform to develop and deploy their complex tactical MILCOM applications (+)

      Features:

      • Tactical Military Communications (MILCOM) Rapid Deployment Platform (TMRDP)
      • Platform equips quick response teams with an integrated platform designed for the rapid development and deployment of tactical MILCOM applications
      • The commercial-off-the-shelf SDR-4000 TMRDP provides full "RF to Ethernet" functionality of a software defined radio (SDR) with support for the Software Communications Architecture (SCA) in a single 19" rack
    • PMC-2MAI Dual A/D Converter PMC Module
      Two 12-bit 65 MSPS A/D converters (+)

      Features:

      • Digital step attenuator allowing input levels from -9 to +6 dBm
      • Digital signal level monitor
      • External input/output clock source
    • LeMans - Octal TMS320C4x VXIbus Master Board
      The LeMans 840 MFLOP octal TMS320C4x VXIbus master board can host up to six single-wide or four double-wide 'C40/44 DSP modules and TIM-40 form factor SRAM, DRAM, EDRAM, or I/O modules (+)

      Features:

      • Supports VXI shared memory, VXI master/slave modes, and 80 Mbytes/sec data transfers via the HP local bus
      • Features JTAG input and output connectors, a test bus controller, and device driver support via VISA or SICL [...]
    • HCDR-1020
      A high-channel-density receiver system (+)

      Features:

      • High-speed communications fabric based on the Solano Communications IC
      • Two high dynamic range 14-bit, 65 or 80 Msamples/sec analog-to-digital converters
      • Eight Graychip GC4016 devices in a double-width ePMC form factor support 32 narrowband or 8 wideband digital down conversions per VME slot
    • PEM-16MSDDC
      A multi-standard digital down converter module compatible with Spectrum's PEM specification (+)

      Features:

      • Four Graychip GC4016 digital down converters (30 MHz to 65 MHz input)
      • Four Xilinx XCV50 or XCV200 FPGA devices
      • Four 2K x 32-bit FIFO buffers for complex samples
    • PEM-4WDC
      A wideband digital down converter PEM mezzanine (+)

      Features:

      • Accepts two digitized IF streams from Spectrum's PMC-2MAI ADC mezzanine at an input sample rate of up to 65 MHz
      • IF streams are transferred from the PMC-2MAI to the PEM-4WDC on a ribbon cable using LVDS signaling for low power consumption and high noise immunity
      • Double-width PEM provides single slot solution with Monaco and Barcelona platforms and PMC-2MAI 65 MHz A/D converter
    • TMI-3350 4-Channel Wideband Analog I/O
      Hot swappable (+)

      Features:

      22244.jpg
      • External frequency reference input for accurate sampling frequency control and time-stamping
      • IRIG-B time code input for time stamping
      • Synchronization connector allows up to three TM1-3350 and DDCs/DUCs running on PRO-3100 boards to receive a common synchronization signal
    • PMC-2MAI
      A dual 12-bit, 65-Msamples/sec, AD6640 A/D converter on a single-width PMC mezzanine (+)

      Features:

      • Samples 130 KHz to 35 MHz Intermediate Frequency (IF) signals
      • Data stream can be passed to Spectum's PEM-16DDC digital down converter
      • Designed for use with Spectrum's Monaco Quad 'C6201 and Monaco76 Quad 'C6701 VMEbus products [...]
    • ePMC-32MSDDC
      Eight Graychip GC4016 digital down converters support 32 narrowband or 8 wideband channels (+)

      Features:

      11701.jpg
      • Supports both wideband and narrowband signals
      • DDCs can be synchronized to provide coherent baseband signals
      • Two user-programmable Xilinx FPGAs for post-processing outputs from down converters
  • Pentland Systems  (3)
    • RAD2
      Digital receiver featuring dual channel, 14-bit resolution with up to 105MSPS sampling speed (+)

      Features:

      16182.jpg
      • Up to 16 individual down-converter channels for I&Q demodulation
      • Xilinx Virtex II FPGA for digital signal processing and A/D control
      • Bi-directional high-speed FIFO buffers
    • MPX501
      2 or 4 Channels Synchro to digital convertor (+)

      Features:

      • Accuracy is ±3 arc mins
      • Synchro input options either 11.8V or 90V
      • Channels individually programmable for 10-16 bit resolution
    • MPX500
      2 or 4 Channels Resolver to digital convertor (+)

      Features:

      • Accuracies are ±2, ±3 or ±4 arc mins
      • Resolver input option either 2V or 11.8V
      • Channels individually programmable for 10-16 bit resolution
  • Texas Instruments  (2)
    • DaVinci Technology
      TMS320DM646x digital media processors are DSP-based multicore SoCs specifically tuned for real-time, multi-format, HD video transcoding (+)

      Features:

      • TMS320DM355 digital media processor consists of an integrated video processing subsystem, an MPEG-4/JPEG co-processor, plus an ARM core
      • TMS320DM644x digital media processors are highly-integrated SoCs based on an ARM926 core and the TMS320C64x+ DSP core
      • TMS320DM643x digital media processors, based on the C64x+ DSP core are ideal for cost-sensitive digital media applications
    • 12-bit ADS7924
      12-bit ADS7924 successive approximation (SAR) analog-to-digital converter (ADC) (+)

      Features:

      • Through intelligent system power management features, the 2.2-V ADS7924 works with any low-power system requiring sensor monitoring to potentially lower power across the system by more than 50 percent
      • Once programmed through its I2C interface, the device can operate independently, periodically waking itself to scan all four ADC channels while using only 5 uW
      • This frees the MCU to process other activities or power down entirely to yield significant power savings in energy harvesting, medical, communications, remote sensor signal monitoring, and portable applications
  • CommAgility  (1)
    • AMC-D1F1-1200
      An AdvancedMC module that offers a compact, high-performance DSP/FPGA signal processing solution for AdvancedTCA and MicroTCA systems (+)

      Features:

      36707.jpg
      • Texas Instruments TMS320C6455 digital signal processor running at 1.2 GHz and a Virtex-4 FX100 FPGA from Xilinx
      • Optimized for applications requiring high-end signal I/O bandwidth in a compact mid-height AMC form factor, such as wireless baseband, image processing, defense, and aerospace
      • Provides a combination of DSP and FPGA resources, with fast and flexible links to external data and over 256 MB of onboard memory
  • North Atlantic Industries  (9)
    • 64DS1
      An intelligent, DSP-based VME card (+)

      Features:

      • Incorporates up to eight separate transformer isolated digital-to-synchro/resolver converters with 1.2 VA drive, extensive diagnostics, signal and reference loss detection, and optional 5VA reference supply
      • 16-bit resolution
      • 30 arc-seconds accuracy
    • 73DS2
      A 3-channel programmable digital-to-synchro/resolver converter available on a PC/104 card (+)

      Features:

      36804.jpg
      • Three independent, transformer isolated, programmable synchro/resolver simulation channels
      • Each channel has 16-bit resolution, ±1 arc-minute accuracy, and a short circuit protected output with 1.2 VA drive capability
      • Each unit includes eight programmable digital input/output channels, wrap-around self-test, programmable output angle rotation, and an optional programmable excitation reference supply
    • 73LD4
      6-channel LVDT/RVDT-to-digital converter on a PC-104 card (+)

      Features:

      31666.jpg
      • The DSP-based 73LD4 includes 6 independent, transformer isolated, programmable LVDT/RVDT tracking converter measurement channels
      • Each channel has 16-bit resolution, ±0.025% F.S. accuracy, accurate digital velocity output, incremental encoder (A+B) outputs, and wrap-around self-test
      • The unit requires a single +5Vdc power supply, operates over a frequency range of 360 Hz to 10 KHz, and has an autoranging input range from 2Vrms to 28 Vrms
    • 8810A
      Dual input synchro/resolver angle measurement instrument (+)

      Features:

      • Touch screen controls
      • 0.001 degrees resolution and 0.004 degrees accuracy
      • autoranging signal inputs [...]
    • 64CS3
      Eight separate S/D and six separate D/S converter channels (+)

      Features:

      • 16-bit resolution, accurate digital velocity outputs
      • Programmable single-speed and two-speed operating modes
      • Isolated inputs and outputs, wrap-around self-test, and optional 5 VA programmable reference supply
    • 73DS1
      PC/104 module that incorporates one transformer isolated synchro/resolver simulation channel with 1.2 VA drive (+)

      Features:

      • 16-bit resolution
      • 1 arc-minute accuracy
      • Transformer isolated
    • 74SD1
      A PMC, DSP-based card for synchro/resolver measurement (+)

      Features:

      • Eight single-speed or four dual-speed channels with extensive diagnostics
      • 16-bit resolution
      • Requires only +5V
    • 64SD1
      A VME high-density intelligent DSP-based card (+)

      Features:

      • Incorporates up to 16 single-speed or eight two-speed transformer isolated synchro/resolver-to-digital tracking converters
      • 16-bit resolution
      • ± 1 arc-minute accuracy
    • 74SD3
      8-channel programmable synchro/resolver-to-digital converter on a conduction-cooled PMC card (+)

      Features:

      33657.jpg
      • The high-density DSP-based 74SD3 includes 8 independent, programmable Synchro/Resolver tracking converter measurement channels
      • Each channel has 16-bit resolution, ±1 arc-minute accuracy, tracking rate to 150 RPS, accurate digital velocity output, and wraparound self-test
      • Channel pairs can be programmed for any two-speed ratio between 2 and 255
  • Microchip Technology, Inc.  (1)
    • dsPIC DSCs
      Digital Signal Controllers for digital control of the power-conversion feedback loop (+)

      Features:

      31189.jpg
      • 1 ns-resolution PWM
      • 2 MSps, 10-bit A/D converter
      • Onboard analog comparators
  • Sundance Multiprocessor Technology Ltd.  (4)
    • SMT378
      Direct connection to C6000 DSP systems (+)

      Features:

      • High accuracy signal source through stringent design criteria communications, base stations and 'Zero-IF' subsystems
      • Wireless local loop (WLL)
      • Local Multipoint Distribution Service (LMDS)
    • ICE105: Embedded I/O Programmable System
      SUNDANCE is a worldwide supplier and manufacturer of industrial-class PCIe/104 digital signal processing (DSP), configurable small form factors and COTS embedded systems. The ICE105 is a rugged system built around a complete range of PCIe/104 small form factor, stackable I/O-configurable and programmable solutions. (+)

      Features:

      229112086961171675.jpg
      • Light weight
      • Rugged enclosure
      • Anti-shock with vibration isolator
    • SMT373
      A TIM module that converts the 16-bit-wide data stream from a Sundance Digital Bus into a low voltage differential signal (LVDS) (+)

      Features:

      6863.jpg
      • The maximum sample speed of 100 MHz can be reduced to achieve distances up to 20 meters
      • Can also be used as an LVDS signal interface for digital cameras, scanners, and instruments [...]
    • SMT3310
      A CompactPCI front-end radio with two module sites (+)

      Features:

      • Sundance Digital Bus (SDB) backplane on J3
      • Digital aand soft radio data input
      • Real-time data processing
  • WinSystems, Inc.  (4)
    • Low-cost A/D & D/A
      Low-cost PC/104 A/D and D/A modules operate from -40 °C to +85 °C yet don't require calibration (+)

      Features:

      45416.jpg
      • Multifunction Analog and Digital I/O modules
      • Standard configuration: 16-bit A/D, 12-bit D/A, 48-lines of digital I/O
      • Software programmable interrupt configuration
    • Opto-Isolated Digital I/O
      WinSystems'two new optically isolated signal conditioning and termination boards are designed for applications requiring signal isolation between a computer and its monitoring points. Isolation creates a barrier which will eliminate common mode voltage and also prevents ground loops on digital signals plus provides safety for industrial applications. (+)

      Features:

      201788296052793135.jpg
      • Small form factor industrial I/O termination boards
      • 24 optically isolated output board;, each output is an Open-Collector Darlington driver
      • 24 optically isolated and debounced input board; input voltage from 5 to 30 volts AC or DC
    • Isolated Digital I/O Signal Condit
      WinSystems two new isolated digital signal conditioning and termination boards for OEM embedded computer system designers. These small boards are needed in applications requiring signal isolation between a computer and its monitoring/control points. The ISM-TRM-RELAY has 16 independent, SPDT relays. The ISM-TRM-COMBO provides a combination of 8 optically isolated inputs, 8 optically isolated outputs, and 8 Form C relays on one board. To insure reliable connection with easy removal and insertion with field wiring, industry-standard, 3.5 mm pluggable connectors are used. (+)

      Features:

      204994397052732787.jpg
      • Small form factor industrial I/O termination boards
      • SPDT Form C medium current relays with contacts rated up to 6A @ 250VAC/24VDC
      • Optically isolated outputs with Open-Collector
    • PC/104 Module combines Serial and Digita
      WinSystems PCM-SDIO is a PC/104-compliant module with four asynchronous serial ports, forty-eight digital I/O lines, which eliminates one board in a stack without sacrificing any features or benefits at a lower cost. The PCM-SDIO support -40° to +85°C temperation operation without forced air cooling. (+)

      Features:

      197659620052986158.jpg
      • PC/104 Quad Serial and 48-line Digital I/O module
      • Each serial channel supports:
      • 16 byte Tx and Rx FIFOs
  • National Semiconductor  (2)
    • LM49352 and LM49151
      The PowerWise LM49352 mixed-signal audio subsystem and LM49151 analog subsystem are targeted at smart phones, full-featured phones, portable gaming devices, and GPS devices (+)

      Features:

      41693.jpg
      • The LM49352 is a mixed-signal audio subsystem that integrates audio codec functionality with ground-referenced headphone amplifiers, earpiece driver, Class D loudspeaker and audio Digital Signal Processor (DSP) in one miniature 3.3 mm by 3.3 mm package
      • The loudspeaker delivers ultra-high efficiency (93 percent at 970 mW from a 4.2 V supply), while the headphone amplifier offers low-power (18 mW) MP3 playback to extend battery life
      • The LM49151 analog subsystem integrates an earpiece driver, Class D loudspeaker, ground-referenced headphone amplifiers and automatic level control (ALC) in an ultra-small 2.2 mm by 2.6 mm package
    • Sensor WEBENCH
      National Semiconductor's WEBENCH Sensor Designer tool enables engineers to quickly move from concept to simulation to prototyping of common sensor solutions (+)

      Features:

      • National's WEBENCH Sensor Designer tool matches the industry's leading bridge pressure sensors, photo detector sensors and thermocouple sensors with National's PowerWise energy-efficient op amps and pin- and function-compatible 8-, 10-, 12-, 14- and 16-bit ADCs
      • Each signal path solution amplifies, conditions and digitizes the sensor output to directly link to a microcontroller or digital signal processor (DSP)
      • Using the ‘Build It!' option, designers can generate solutions they can use for evaluation and prototyping
  • Aeroflex Laboratories, Inc.  (4)
    • BSA/BSG Families
      Broadband Signal and Environment Generator (BSG) and Broadband Signal Analyzer and Recorder (BSA) families (+)

      Features:

      19013.jpg
      • The BSG combines very high speed signal memory with depths up to 16 GB, high-performance D/A converters with sampling rates up to 1,300 MHz, and broadband RF up-converters
      • The BSA family combines broadband RF down-converters, wide-bandwidth high dynamic range A/D converters with sample rates to 1,500 MHz, and up to 16 GB of high-speed memory to record and analyze complex broadband signals and environments using DSP-based signal analysis software [...]
    • IQCreator™
      Designed for use with Aeroflex's digital RF signal generators, including the 3410 and PXI-based 3000 series, IQCreatorTM enables you to create waveform files that emulate digita (+)

      Features:

      • WiMAX
      • Generic Modulation
      • TDMA Digital Standards
    • 3000 RF Modules
      RF Digitizers provide precision conversion of RF signals up to 6 GHz into digital sample data (+)

      Features:

      33857.jpg
      • Used with PXI Studio application software, provide class leading high Vector Signal Analysis of RF signals
      • A series of complimentary Digital RF signal generator modules provide complex modulated baseband and RF signals up to 6 GHz
      • The Aeroflex PXI studio application software provides a framework for vector signal analysis and generation within a single integrated user interface with a C API [...]
    • 3920B Digital Radio Test Set
      The 3920B is the newest radio test set introduced by Aeroflex. The 3920B features a new low phase noise RF signal generator in addition to the already advanced functionality available on the Aeroflex 3900 Series. The 3920B includes many standard features as well as a host of optional test capabilities and digital personalities. (+)

      Features:

      284969905861444379.jpg
      • Analog AM and FM
      • P25 and P25 Phase II
      • DMR (MOTOTRBO)
  • Nallatech  (1)
    • VXS-620 FPGA
      FPGA and PowerPC VXS multiprocessor (+)

      Features:

      42875.jpg
      • Designed to meet the signal processing needs of modern signal intelligence, software defined radio, and radar applications
      • The VXS-620 is the latest product to be introduced to the highly successful Nallatech REVX Series of rugged embedded processing solutions
      • The VXS-620 features an onboard Xilinx Virtex-5 FPGA for the implementation of high performance DSP applications
  • 4DSP  (5)
    • FMC645
      The FMC645 is a Digital Signal Processor FMC daughter card based on the Texas Instruments TMS320C6455 device. The FMC645 daughter card is mechanically and electrically compliant with the FMC standard (ANSI/VITA 57.1). The card has a high-pin count connector and can be used in a conduction cooled environment. The card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions and peripheral interfaces. Several Gigabit differential pairs from the FMC connector are used to implement a PCIe and Serial Rapid IO interface between the FMC and the carrier. Many other digital I/O interfaces are also made available to the FMC carrier. Because of the use of level translators between the DSP and the FMC connector the FMC645 can fully operate on any VITA 57.1 compliant carrier. A 512 MB DDR2 SDRAM on-board bank directly connects to the DSP thus providing the FMC645 with the memory resources required for demanding signal processing applications. (+)

      Features:

      212158754661410541.jpg
      • 1.2 GHz TMS320C6455 DSP
      • Fully conduction cooled compliant
      • VITA 57.1-2010 compliant
    • Wideband DDC
      A Digital Down Converter performs channel access functions in digital receivers (+)

      Features:

      43474.jpg
      • It is used for extracting a channel (frequency band) of interest in a wideband signal
      • This core can be used for the following family devices: Xilinx Virtex II Pro; Virtex-4; Virtex-5; Spartan-3; Altera Stratix; Stratix II; Cyclone II, Cyclone III [...]
    • CES720
      The CES720 (Compact Embedded System) is a standalone, small form factor embedded system designed to provide a complete and generic processing platform for data acquisition, signal processing, and communication. The system features a low-power x86 CPU tightly coupled to a high-performance Kintex-7 and FPGA Mezzanine Card (FMC - VITA 57.1). The Kintex-7 410T FPGA provides a flexible and powerful processing backbone for interfacing to the FMC site, CPU, and external DDR3 SDRAM, with plenty of room left over for high-performance Digital Signal Processing needs. (+)

      Features:

      282556924091950899.jpg
      • System Controller - AMD G-Series Dual Core 1.0GHz Processor T40E
      • FPGA - Kintex-7 410T FFG676
      • 2GB DDR3 SDRAM
    • FC6301
      A high-performance CompactPCI card with advanced digital signal processing capabilities (+)

      Features:

      52443.jpg
      • Virtex-6 LX240T, LX365T, LX550T, SX315T, SX315T, SX475T
      • High density Memory Options using BLAST sites: DDR2 and DDR3 SDRAM, QDR2 SRAM, NAND FLASH
      • Onboard user defined 128Mbit Flash ROM
    • VP680
      The VP680 is a high performance VITA 46 (VPX) standard compliant card with advanced digital signal processing capabilities (+)

      Features:

      52442.jpg
      • Virtex-6 LX130T, LX240T, LX365T, SX315T, SX315T, SX475T
      • High density Memory Options using BLAST sites: DDR2 and DDR3 SDRAM, QDR2 SRAM, NAND FLASH
      • VPX VITA 46 Compliant
  • Quadros Systems, Inc.  (1)
    • RTXC Quadros
      A configurable and scalable RTOS architecture for convergent processing (+)

      Features:

      • Uses two real-time kernels: RTXC/ss, and single-stack, thread-based kernel, and RTXC/ms, a multi-stack task-based kernel
      • Meets the requirements of real-time, control-processing, or Digital Signal Processing (DSP) applications
      • Supported processors: ARM 7/7T, 9/9T, Motorola DSP56F800, Motorola DSP65300/600, Motorola ColdFire family, Motorola PowerPC, Motorola StarCore MSC8101, and Texas Instruments TMS320C54x, TMS320C55x [...]
  • ELMA Electronic  (1)
    • VPX-300 SystemPak
      The VPX-300 SystemPak is a reference development platform based on 3U VPX architecture (+)

      Features:

      52829.jpg
      • Designed around a Virtex-6 FPGA front end processor (FEP) card
      • Combining data and control plane topology, the architecture supports multi-processor capability via two clusters for front-end and back-end processing
      • The OpenVPXTM standard backplane profile has two separate star sections that are established through a data and control plane switch, handling both PCIe and GigE links
  • PLDA  (1)
    • PCI-X SYS Dev.Board
      A development board for PCI-X (+)

      Features:

      • PLDA 64-bit, 133 MHz PCI-X IP core
      • Can be mounted with several Stratix devices in different sizes, from 10,570 to 32,470 LEs
      • Two fully-independent banks of 4 Mbit x 32-bit words of DDR SDRAM
  • SP Devices  (1)
    • TIGER DSP
      TIGER DSP is a digital signal processing board featuring a Xilinx Virtex 6 FPGA, data memory, and various host connections. (+)

      Features:

      45623.jpg
      • FPGA: Xilinx Virtex 6 LX240T
      • Peer-to-Peer Streaming
      • Memory size: 1 GByte
  • Texas Instruments, Inc.  (2)
    • TMS320C66x multicore DSP
      Texas Instruments Incorporated is offering developers the industry’s highest performing, scalable and flexible multicore solutions based on its TMS320C66x digital signal processor (DSP) generation. (+)

      Features:

      • Fixed- and floating-point capabilities
      • Highly suited for audio infrastructure products as well as vibration and acoustic analyzers
      • Excellent fit for high precision motion control and high channel count real-time process control system
    • DM64x
      A series of digital media processors (+)

      Features:

      • Available as the DM642, the 500 and 600 MHz versions of the DM641, and the 400 MHz DM640
      • Processors are for use in a range of video-client type applications such as IP-based video recorders, set-top boxes, security surveillance, and network cameras
      • Built on the architecture of the TMS320C64x generation of DSPs
12/7/22 13:01
Close

Subscribe to DSP updates