DSP

Showing results for: digital signal processor
Refine DSP companies and products:
dsp digital signal processor digital signal processing dsp engine radar digital signal processing dsp software dsp hardware dsp system dsp systems radar signal processor digital signal processors discontinuous signal digital signal processin a/d d/a
Click on any vendor
to see a listing of
digital signal processor related products.
  • Traquair Data Systems, Inc.  (1)
    • ORS-11x
      Multi-channel analog interfaces with a user-programmable Spartan-IIE or Virtex-II FPGA, providing developers with the means to implement FPGA-based digital signal processing solutions (+)

      Features:

      31753.jpg
      • Can be used as stand-alone devices with the user-programmable FPGA responsible for supporting all signal processing functionality, or as daughtercards to micro-line DSP/FPGA boards
      • A variety of multi-channel A/D/A configurations are supported: 2-channel 14-bit A/D/A with ADC sample rates up to 65 MSps; 4-channel 16-bit A/D/A with ADC sample rates up to 2.5 MSps; 12-channel A/D/A with ADC sample rates up to 250 KSps
      • If the capabilities of a Texas Instruments TMS320C6000 DSP processor are required, an ORS-11x board can be fitted as a daughtercard to a TMS320C6000-based micro-line embedded DSP/FPGA board
  • Curtiss-Wright  (10)
    • CHAMP-AV8
      Rugged, high performance OpenVPX DSP (digital signal processing) engine based on Intel next-generation quad-core processor technology (+)

      Features:

      46882.jpg
      • High-performance floating-point processing for digital signal processing
      • (DSP) and general purpose applications
      • 6U OpenVPX-compliant
    • VPX3-453 3U VPX Virtex-6/8640D DSP
      The VPX3-453 is a high performance, small form factor DSP engine that combines a Xilinx® Virtex®-6 FPGA and a Freescale® Power Architecture MPC8640D processor. This small form-factor 3U VPX (VITA 46/48) card is ideal for SWaP-constrained environments and is designed to support the full -40 + 85 deg C rugged operating temperature range. The VPX3-453 speeds and simplifies the integration of advanced DSP and image processing into embedded systems designed for demanding Radar Processing, Signal Intelligence, ISR, Image Processing, and Electronic Warfare applications. (+)

      Features:

      217438257121131374.jpg
      • One user-programmable Xilinx Virtex-6 FPGA node (LX240T)
      • One Dual-core Freescale Power Architecture MPC8640 processor
      • On-board Gen2 PCIe switch
    • CHAMP-WB 6U OpenVPX Virtex-7 FPGA Card
      The Curtiss-Wright CHAMP-WB is a user-programmable Xilinx Virtex-7 FPGA-based computing product designed to meet the needs of challenging embedded high-performance digital signal and image processing applications. The CHAMP-WB is targeted specifically at wide-band, low latency applications that require large FPGA processing, wide input/output requirements, with minimal latency. (+)

      Features:

      226605770407897699.jpg
      • OpenVPX (VITA 65) profile MOD6-PAY-4F1Q2U2T-12.2.1-11, VPX REDI (VITA 48 option)
      • Digital Signal Processor with Single user-programmable Xilinx Virtex-7 FPGAs (X690T or X980T)
      • 8 GB DDR3L SDRAM in two banks
    • MPMC-9335 VPX COTS System
      The new MPMC-9335 is a 3-slot COTS rugged VPX system designed for easy and quick configuring to meet demanding requirements of defense, aerospace & law enforcement applications. This compact and lightweight small form factor system is ideal for space/weight/power (SWaP)-constrained platforms such as UAVs and ground vehicles. With its latest generation quad-core Intel Corei7 single board computer & 240-core NVIDIA Fermi GPGPU, the MPMC-9335 is well-suited for compute intensive applications such as image, data and radar processing. (+)

      Features:

      204732848407408525.jpg
      • 3U 3 slot integrated system
      • 9.3â€?L x 5.5â€?W x 4.9â€?H and 14.5 lbs (fully populated)
      • DEF-STAN 61-5 Part 6, Issue 6 28 (17.5-32) VDC input Power Supply
    • FPE650 FPGA VPX
      A quad FPGA processor card which combines high bandwidth I/O, achieved through VPX/VPX-REDI and FMC/VITA 57 sites (+)

      Features:

      36805.jpg
      • Designed for the most demanding digital signal processing applications such as electronic counter measures, signal intelligence, and electro-optics
      • Four Xilinx LXT, SXT, or FXT Virtex-5 FPGAs
      • 4x Xilinx Virtex-5 FPGAs (SX95T, LX155T, FX100T)
    • VPX3-450 MPC8640 & Virtex-5 VPX Digital Signal Processor
      One Xilinx Virtex-5 Platform FPGA (LX155T, or SX95T) (+)

      Features:

      42988.jpg
      • 256 MB DDR2 SDRAM attached to the FPGA, 2.2 GBps peak bandwidth
      • 18 MB QDR-II+ SRAM attached to the FPGA in two banks, 4.4 GBps peak bandwidth
      • 1 GHz Freescale MPC8640D dual-core processor with 1 GB of DDR2 SDRAM in two banks
    • HPE720 MPC8640 & Virtex-5 VPX Digital Signal Processor
      Dual Xilinx Virtex-5 FPGAs (LX220/330T or SX240T) (+)

      Features:

      • Four banks of 9 MB QDRII SRAM (36-bit) and 2 banks of 512 MB DDR2 SDRAM (32-bit)
      • Single or dual-core Freescale MPC8640D processor at 1.0 GHz with 1 GB DDR2 per bank
      • Dual FPGA Mezzanine Card (FMC/VITA 57) sites OR 1 FMC and 1 XMC/PMC site
    • CHAMP-FX2 MPC8640 & Virtex-5 VPX Digital Signal Processor
      Two Xilinx Virtex-5 FPGAs (LX110T or LX220T) (+)

      Features:

      • 512 MB or 1 GB DDR2 SDRAM per FPGA in two banks (1-2 GB total onboard), 4.4 GBps peak bandwidth per FPGA
      • 36 MB QDR-II+ SRAM per FPGA in four banks (72 MB total onboard), 8.8 GBps peak bandwidth per FPGA
      • 1 GHz MPC8640D dual-core processor with 512 MB of DDR2 SDRAM in two banks
    • CHAMP-FX4 6U OpenVPX Virtex-7
      The CHAMP-FX4 is the flagship 6U product in Curtiss-Wright Defense Solutions’ family of user programmable Xilinx® Virtex®-7 FPGA-based computing products, designed to meet the needs of challenging embedded high performance digital signal and image processing applications. Curtiss Wright’s 4th generation 6U FPGA card, the CHAMP FX4 combines the dense processing resources of three large Xilinx Virtex-7 FPGAs with over 12 GB of memory resources, all on a rugged 6U OpenVPX (VITA 65) form factor module. (+)

      Features:

      292163107861464693.jpg
      • Over 100 GB/s of backplane I/O bandwidth
      • Gen2 Serial RapidIO (SRIO) provides standards-based connectivity to general-purpose processing boards such as the VPX6-1957 and CHAMP-AV8
      • Two FMC interfaces with 80 differential signal pairs
    • CHAMP-AV IV
      The third generation of our quad PowerPC DSP boards with the QuadFlow architecture providing high bandwidth connections between four 7447A/7448 processors (+)

      Features:

      35365.jpg
      • Quad PowerPC 7447A/7448 processors at up to 1.25 GHz
      • Up to 512 MB DDR-250 SDRAM with ECC per processor (2 GB total) and 64 Kbytes L1 and 1 Mbyte (7448) L2 internal caches operating at core processor speed
      • QuadFlow architecture with 3.2 GB/s peak on-board throughput
  • AcQ InduCom  (6)
    • VME383
      A DSP DAC for high-speed analog signal regeneration and digital signal processing (+)

      Features:

      • 6U VMEbus board
      • Four TMS320C32 floating point DSPs running at 60 MHz, delivering 30 MIPS
      • Three high-speed 16-bit D/A channels per DSP
    • CPCI381
      A 3U CompactPCI board providing a powerful platform for high-speed analog signal capturing and digital signal processing (+)

      Features:

      11141.jpg
      • TMS320C32 floating point DSP, running at 60 MHz, delivering 30 MIPS
      • Two simultaneous sampling 12-bit A/D channels
      • Programmable sampling rate up to 7.5 Msamples/sec
    • VME381
      A DSP ADC for high-speed analog signal capturing and digital signal processing (+)

      Features:

      • 6U VMEbus board
      • Four TMS320C32 DSPs, each with 2 analog input channels, running at 60 MHz, delivering 30 MIPS
      • Two simultaneous sampling 12-bit A/D channels per DSP
    • M383 DSP M-module
      Provides a powerful platform for high-speed analog signal (re) generation and digital signal processing (+)

      Features:

      • Three analog output channels share the 10 MSps output update rate
      • Local software allows enhanced and user-specific signal processing
      • Eight general-purpose digital I/Os (4x input, 4x output, TTL-compatible) are available [...]
    • M381 DSP M-module
      Provides a powerful platform for high-speed analog signal capturing and digital signal processing (+)

      Features:

      • Two analog input channels are capable of simultaneously sampling at (maximum) 7.5 MSps sampling rate
      • Local software allows enhanced and user-specific signal processing
      • Gain and offset errors are compensated by the DSP
    • CPCI383
      A 3U CompactPCI board providing a powerful platform for high-speed analog signal (re)generation and digital signal processing (+)

      Features:

      11143.jpg
      • TMS320C32 floating point DSP, running at 60 MHz, delivering 30 MIPS
      • Three high-speed, 16-bit D/A channels
      • Analog output rate is software programmable up to 7.5 Msamples/sec (using DMA, single channel)
  • Sheldon Instruments  (1)
    • SI-C6713DSP-PMC
      Enables adding real-time signal processing capabilities (+)

      Features:

      • PCI Mezzanine Card (PMC) is a widely used industry standard for small-sized mezzanine modules
      • A high-performance DSP processor and graphical application development in LabVIEW
      • Suitable for real-time processing applications
  • XILINX, Inc.  (2)
    • Virtex-5 SXT platform
      Getting all the processing performance, memory and high-speed I/O is a never ending quest for applications heavy in digital signal processing (+)

      Features:

      32897.jpg
      • Integrating the flexibility of programmable logic makes building a processor even more challenging
      • The Xilinx Virtex-5 SXT platform establishes an industry record for DSP performance delivering 352 GMACs at 550MHz, while consuming 35 percent less dynamic power as compared to previous 90nm generation devices, and is the first DSP-optimized FPGA family to integrate serial transceivers
      • The Virtex-5 SXT platform delivers the highest ratio of DSP blocks-to-logic needed for high-performance digital signal processing applications in wireless, such as WIMAX and high-definition video, such as surveillance and broadcast
    • System Design Tools
      Build highly integrated 8- to 32-bit µP/µC systems (+)

      Features:

      19224.jpg
      • Implement sophisticated signal processing designs
      • Accelerate your real-time DSP processor systems [...]
  • Spectrum Digital  (4)
    • eZdsp for TMS320VC5410
      A starter kit for the TMS320VC5410 DSP (+)

      Features:

      • TMS320VC5410 Digital Signal Processor operating at 100 MHz
      • Embedded IEEE 1149.1 JTAG scan controller
      • Interface to host PC through parallel port for debug and communications
    • eZdsp for TMS320VC33
      A starter kit for the TMS320VC33 DSP (+)

      Features:

      • TMS320VC33 Digital Signal Processor operating at 60 MHz
      • Embedded IEEE 1149.1 JTAG scan controller
      • Interface to host PC through parallel port for debug and communications
    • eZdsp for TMS320VC5402
      A starter kit for the TMS320VC5402 DSP (+)

      Features:

      • TMS320VC5402 Digital Signal Processor operating at 100 MHz from Texas Instruments
      • Embedded IEEE 1149.1 JTAG scan controller
      • Interface to host PC through parallel port for debug and communications
    • EVM320C203/F206
      A 3U 6.3 x 3.93 inch evaluation module for the TI 'C203/F206 DSPs with on-chip UART (+)

      Features:

      • Texas Instruments TMS320F206 Digital Signal Processor (20 Mips) with 32K words Flash UART on-chip
      • 64K words program and 64K words data zero wait state memory
      • 32K words on board FLASH memory
  • SKY Computers, Inc.  (1)
    • 2U Rack Mount
      2U Rack Mount Digital Signal Processor (+)

      Features:

      • Intel based Digital Signal Processing Computing System
      • Designed for radar or imaging applications
      • Input bandwidth: 2.5 GByte per second
  • ZTEC Instruments, Inc.  (15 of 21)
    • ZT500PXI
      14-Bit Arbitrary Waveform Generator (+)

      Features:

      • 2 mVpp to 7 Vpp Programmable Output Signal Range in 2 mV Steps
      • 300 MSample/s to 40 MSample/s Programmable Sample Rate
      • 200 MHz Maximum Analog Bandwidth
    • ZT100PC
      A DSP processor that provides high-speed signal acquisition and processing in a PC/104 instrument (+)

      Features:

      • 80 MHz TMS320C5X DSP
      • User interface is provided through the PC/104 bus or through the RS-232/485 serial port
      • 32 general purpose digital I/O ports
    • ZT420PXI-TMT
      PXI/CompactPCI 200MSPS Digitizer / Digital Oscilloscope (+)

      Features:

      • Ability to test both pre-defined and user defined telecom masks
      • Automated scope configuration file save and detailed examples on mask definition allow straightforward creation of specialized masks
      • Onboard DSP software allows capture of up to 1024 waveforms with microsecond duration rearm times between waveforms
    • ZT200VME
      A modular intermediate frequency (IF) processor providing IF signal detection, processing, and modulation in a 6U VMEbus instrument (+)

      Features:

      • TMS320C50 DSP provides a complete set of IF measurement and processing capabilities including magnitude/phase measurements, In-phase/Quadrature (IQ) measurements, modulation analysis, signal modulation and demodulation, error detection and correction, equalization and filtering, feedback control, and adaptive beam-forming and noise cancellation
      • Three IF inputs (100- kHz to 10 MHz adjustable frequency range)
      • 80 dB input signal dynamic range
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      9289.jpg
      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZT442PXI
      2 Channels Simultaneous Acquisition (+)

      Features:

      • 1 GSample/s Single Shot
      • Flexible Range, Offset, Coupling, Impedance, Sampling Rate, & Analog Filtering
      • 300 MHz Analog Bandwidth
    • ZT450PXI-00 -Digital-Storage Oscilloscope
      2 (PCI, PXI) or 4 (VXI) channels (+)

      Features:

      • 8-bit resolution
      • 1 GSps to 2.5 GSps single-channel interleaved sample rates
      • 500 MHz to 1 GHz max analog bandwidth
    • ZTC400SCU
      Analog input: DC to 150 MHz bandwidth (+)

      Features:

      • Analog signal range: 1V maximum
      • 500 MSamples/sec sample rate
      • 12-bit ADC resolution
    • ZT420VXI / ZT422VXI
      8-bit digitizer/digital oscilloscope, ZT420VXI: I channel, ZT422VXI: 2 channel (+)

      Features:

      • + 0.1V to + 5V programmable input signal range
      • 200 MSamples/ sec to 10 MSample/sec programmable sample rate
      • 100 MHz analog bandwidth
    • Z1428VXI
      A full featured digital storage oscilloscope for both legacy and next generation modular instrumentation systems (+)

      Features:

      16009.jpg
      • 2 channels simultaneous, 8-bit resolution
      • 1 GSps, 250 MHz analog bandwidth
      • 1 MS record length per channel
    • ZT442 family
      A family of three complete, high performance digital storage oscilloscopes (+)

      Features:

      14829.jpg
      • Two channels simultaneous full-speed
      • 1 GSample/sec single shot
      • Flexible signal processing, range, offset, coupling, impedance, sampling rate, and analog filtering
    • ZT621VXI
      Two channels simultaneous full speed (+)

      Features:

      • 1 Gsample/sec single shot
      • signal processing, range offset, coupling, impedance, sampling rate, and analog filtering
      • 300MHz analog bandwidth
    • ZT432VXI
      2 channel (PXI) or 4 channels simultaneous (VXI), 12-bit resolution (+)

      Features:

      • 200 MS/s, 90 MHz analog bandwidth
      • Up to 4 MS record length per channel
      • Programmable range, offset, coupling, impedance, sampling rate, and analog filtering
    • ZT420VXI
      A one-channel digitizer/digital oscilloscope (+)

      Features:

      10410.jpg
      • Up to 200 Msamples
      • Single-wide, C-sized VXIbus modules
      • 4 Msample memory sizes per channel
  • Synopsys, Inc.  (1)
    • SPW Hardware Design System (HDS)
      Fastest path from innovation into implementation for digital signal processing systems, applying a model-based design approach (+)

      Features:

      46490.jpg
      • At its core is the C Data Flow (CDF) modeling paradigm, which enables the most efficient description of digital signal processing systems which may be implemented in dedicated digital hardware or embedded software
      • SPW Hardware Design System (HDS) is a key component in the SPW product family
      • It accelerates the hardware design, verification, and analysis of complex, algorithm intensive Digital Signal Processing (DSP) systems
  • Mistral Solutions Pvt. Ltd.  (1)
    • OMAP3 EVM
      The OMAP3 EVM is an ideal software development and device prototyping platform for users to get started on their wireless/multimedia based application and device development (+)

      Features:

      • Built around TI's OMAP35x processor powerful 35x processor comprising of advanced Superscalar ARM Cortex-A8 RISC core with NEON co-processing, IVA2.2 subsystem with a C64x+ digital signal processor (DSP) core and SGX subsystem for 2D and 3D graphics acceleration
      • Support for multiple display outputs like VGA LCD, DVI, S-Video and Composite-Video
      • Modular & extendable architecture
  • CommAgility  (2)
    • AMC-D1F1-1200
      An AdvancedMC module that offers a compact, high-performance DSP/FPGA signal processing solution for AdvancedTCA and MicroTCA systems (+)

      Features:

      36707.jpg
      • Texas Instruments TMS320C6455 digital signal processor running at 1.2 GHz and a Virtex-4 FX100 FPGA from Xilinx
      • Optimized for applications requiring high-end signal I/O bandwidth in a compact mid-height AMC form factor, such as wireless baseband, image processing, defense, and aerospace
      • Provides a combination of DSP and FPGA resources, with fast and flexible links to external data and over 256 MB of onboard memory
    • AMC-D24AF4-RF2
      The AMC-D24AF4-RF2 is a highly integrated AdvancedMC (AMC) card with two wideband RF transceiver channels. The module’s main processor is the KeyStone™ II architecture-based TCI6638 digital signal processor (DSP)/ARM® SoC, which includes eight TMS320C66x+ DSP cores, as well as four ARM Cortex®-A15 cores for higher layer processing. The module also has two C6678 DSPs, plus a large Xilinx Kintex-7 FPGA. (+)

      Features:

      331528922051569331.jpg
      • Texas Instruments TCI6638 SoC DSP
      • Two Texas Instruments TMS320C6678 SoC DSPs
      • Two RF channels, each supporting FDD or TDD 662MHz - 3.84GHz
  • BeagleBoard  (1)
    • OMAP3 BeagleBoard
      Affordable, low-power, bring-your-own-peripherals computer based on a superscalar ARM processor, high-definition video capable general purpose DSP, and 3D graphics accelerator (+)

      Features:

      • ARM Cortex-A8 at 600 MHz, 1200 Dhrystone MIPS, and a roadmap to higher clock frequencies
      • C64x+ digital signal processor at 430 MHz capable of 720P video decode with a free C compiler for general purpose DSP programming
      • Imagination Technology PowerVR SGX 3D graphics processor capable of rendering over 10 million polygons per second and with a programmable pixel shader pipeline
  • National Semiconductor  (2)
    • LM49352 and LM49151
      The PowerWise LM49352 mixed-signal audio subsystem and LM49151 analog subsystem are targeted at smart phones, full-featured phones, portable gaming devices, and GPS devices (+)

      Features:

      41693.jpg
      • The LM49352 is a mixed-signal audio subsystem that integrates audio codec functionality with ground-referenced headphone amplifiers, earpiece driver, Class D loudspeaker and audio Digital Signal Processor (DSP) in one miniature 3.3 mm by 3.3 mm package
      • The loudspeaker delivers ultra-high efficiency (93 percent at 970 mW from a 4.2 V supply), while the headphone amplifier offers low-power (18 mW) MP3 playback to extend battery life
      • The LM49151 analog subsystem integrates an earpiece driver, Class D loudspeaker, ground-referenced headphone amplifiers and automatic level control (ALC) in an ultra-small 2.2 mm by 2.6 mm package
    • Sensor WEBENCH
      National Semiconductor's WEBENCH Sensor Designer tool enables engineers to quickly move from concept to simulation to prototyping of common sensor solutions (+)

      Features:

      • National's WEBENCH Sensor Designer tool matches the industry's leading bridge pressure sensors, photo detector sensors and thermocouple sensors with National's PowerWise energy-efficient op amps and pin- and function-compatible 8-, 10-, 12-, 14- and 16-bit ADCs
      • Each signal path solution amplifies, conditions and digitizes the sensor output to directly link to a microcontroller or digital signal processor (DSP)
      • Using the ‘Build It!' option, designers can generate solutions they can use for evaluation and prototyping
  • Texas Instruments, Inc.  (2)
    • TMS320C66x multicore DSP
      Texas Instruments Incorporated is offering developers the industry’s highest performing, scalable and flexible multicore solutions based on its TMS320C66x digital signal processor (DSP) generation. (+)

      Features:

      • Fixed- and floating-point capabilities
      • Highly suited for audio infrastructure products as well as vibration and acoustic analyzers
      • Excellent fit for high precision motion control and high channel count real-time process control system
    • DM64x
      A series of digital media processors (+)

      Features:

      • Available as the DM642, the 500 and 600 MHz versions of the DM641, and the 400 MHz DM640
      • Processors are for use in a range of video-client type applications such as IP-based video recorders, set-top boxes, security surveillance, and network cameras
      • Built on the architecture of the TMS320C64x generation of DSPs
  • Appliance-Lab  (1)
    • CEX-32386-1
      Direct 10Base-T Ethernet connection; supports additional DRAM, SRAM and Flash memory options (+)

      Features:

      • Integrates Intel's 386EX and 60 MHz TMS320C32 floating point digital signal processor
      • Configurable with 4 to 32 Mbytes DRAM SIMMs for 386EX and 128 Kbytes to 1.5 Mbytes of zero-wait-state SRAM for DSP
      • 256 Kbytes to 1 Mbyte SRAM shared memory interface
  • AEWIN Technologies Co., Ltd.  (2)
    • ivAdapter
      Palm size adapter, TI DSP-based Intelligent Video Analysis platform (+)

      Features:

      42535.jpg
      • Onboard hyper-speed TI TMS320DM642 digital signal processor
      • Embedded ObjectVideo OnBoard intelligent video analytics technology
      • Easily integrates with existing CCTV security systems
    • ivBox
      Desktop Box TI DSP-based Intelligent Video Surveillance Appliance with ObjectVideo OnBoard (+)

      Features:

      • Onboard hyper-speed TI TMS320DM642 digital signal processor
      • Embedded ObjectVideo OnBoard intelligent video analytics technology
      • Easily integrates with existing CCTV security systems
  • Metrowerks Corporation  (2)
    • CodeWarrior for RCF
      A integrated development environment (IDE) for Motorola's Reconfigurable Compute Fabric (RCF) technology (+)

      Features:

      • Works with Motorola's MRC6011 RCF device and MSC8126 StarCore digital signal processor
      • Facilitates the creation of high-performance baseband processing systems supporting multiple 3G standards including WCDMA, CDMA2000, and TD-SCDMA
      • Uses industry-standard MetroWerks IDE as the design environment for the entire baseband development cycle
    • CodeWarrier for StarCore v1.0
      An integrated suite of development tools designed specifically for the MSC8101 digital signal processors (+)

      Features:

      • Optimized for networking and communications applications
      • All of the tools work the same way for different microcontrollers [...]
  • Agilent Technologies  (5)
    • COTS VME/VXS Boards
      A new family of COTS VME/VXS (VITA 41 form factor) boards combining state-of-the-art Xilinx Virtex-4 SX and FX functionalities with advanced Acqiris data conversion technology (+)

      Features:

      32078.jpg
      • Incorporates Acqiris' JetSpeed II technology for clock generation and distribution
      • Feature two Xilinx Virtex-4 FPGAs, one SX55 targeted at digital signal processing and one FX100 for data flow control
      • Provides support for the VXS interface, two optical links on the front panel, a VME64x interface as well as DDR2 SDRAM memory and auxiliary analog and digital I/Os
    • E1430A
      2 pass, or subranging, 10 Msamples/sec ADC with 23 bits of resolution (+)

      Features:

      • A single-slot, single channel, C-size, VXI card that is a complete A/D module
      • Included in the module with the low distortion, low noise analog to digital converter, is flexible input signal conditioning, tunable digital filtering, an 8-Mbyte memory, and a high-speed local bus
      • Input signal conditioning includes 11 attenuation/gain ranges, AC/DC coupling and an analog anti-alias filter
    • Infiniimax 1130A
      A 1.5 GHz differential probe (+)

      Features:

      17118.jpg
      • Can be paired with Agilent's Infiniium Mixed Signal (MSO) and Digital Signal Oscilloscopes (DSO) for validating and verifying the performance of new high-speed digital product designs
      • Single-ended or differential measurements from a single probe amplifier
      • Controlled transmission-line probe heads provide a flat frequency response over the entire bandwidth specification and eliminate the distortion and loading that affects probes with in-band resonance
    • 81600
      A Infiniium DCA oscilloscope (+)

      Features:

      • TDR capability enables verification of the signal integrity of printed circuit boards, cables, and connectors that incorporate InfiniBand technology
      • Plugins are available that provide up to 80 GHz bandwidth and single-ended and differential TDR measurements [...]
    • PSA-80BW
      A wide-bandwidth, vector spectrum analyzer solution (+)

      Features:

      • Provides 80-MHz demodulation bandwidth and eight-second capture memory for multi-carrier power amplifier (MCPA), signal monitoring, radar, and satellite measurement applications
      • Up to 20 GHz frequency coverage, 0.1dB amplitude flatness, 0.7 degree phase flatness, and optional 1.2 Gbyte (768 Msamples) deep capture memory to provide eight seconds of full-bandwidth capture at the maximum sample rate
      • Well suited for error vector modulation (EVM)
  • 4DSP  (6)
    • FMC645
      The FMC645 is a Digital Signal Processor FMC daughter card based on the Texas Instruments TMS320C6455 device. The FMC645 daughter card is mechanically and electrically compliant with the FMC standard (ANSI/VITA 57.1). The card has a high-pin count connector and can be used in a conduction cooled environment. The card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions and peripheral interfaces. Several Gigabit differential pairs from the FMC connector are used to implement a PCIe and Serial Rapid IO interface between the FMC and the carrier. Many other digital I/O interfaces are also made available to the FMC carrier. Because of the use of level translators between the DSP and the FMC connector the FMC645 can fully operate on any VITA 57.1 compliant carrier. A 512 MB DDR2 SDRAM on-board bank directly connects to the DSP thus providing the FMC645 with the memory resources required for demanding signal processing applications. (+)

      Features:

      212158754661410541.jpg
      • 1.2 GHz TMS320C6455 DSP
      • Fully conduction cooled compliant
      • VITA 57.1-2010 compliant
    • CES720
      The CES720 (Compact Embedded System) is a standalone, small form factor embedded system designed to provide a complete and generic processing platform for data acquisition, signal processing, and communication. The system features a low-power x86 CPU tightly coupled to a high-performance Kintex-7 and FPGA Mezzanine Card (FMC - VITA 57.1). The Kintex-7 410T FPGA provides a flexible and powerful processing backbone for interfacing to the FMC site, CPU, and external DDR3 SDRAM, with plenty of room left over for high-performance Digital Signal Processing needs. (+)

      Features:

      282556924091950899.jpg
      • System Controller - AMD G-Series Dual Core 1.0GHz Processor T40E
      • FPGA - Kintex-7 410T FFG676
      • 2GB DDR3 SDRAM
    • FC6301
      A high-performance CompactPCI card with advanced digital signal processing capabilities (+)

      Features:

      52443.jpg
      • Virtex-6 LX240T, LX365T, LX550T, SX315T, SX315T, SX475T
      • High density Memory Options using BLAST sites: DDR2 and DDR3 SDRAM, QDR2 SRAM, NAND FLASH
      • Onboard user defined 128Mbit Flash ROM
    • VP680
      The VP680 is a high performance VITA 46 (VPX) standard compliant card with advanced digital signal processing capabilities (+)

      Features:

      52442.jpg
      • Virtex-6 LX130T, LX240T, LX365T, SX315T, SX315T, SX475T
      • High density Memory Options using BLAST sites: DDR2 and DDR3 SDRAM, QDR2 SRAM, NAND FLASH
      • VPX VITA 46 Compliant
    • Wideband DDC
      A Digital Down Converter performs channel access functions in digital receivers (+)

      Features:

      43474.jpg
      • It is used for extracting a channel (frequency band) of interest in a wideband signal
      • This core can be used for the following family devices: Xilinx Virtex II Pro; Virtex-4; Virtex-5; Spartan-3; Altera Stratix; Stratix II; Cyclone II, Cyclone III [...]
    • FM680
      The first in a series of Xilinx Virtex-6 FPGA based XMC and PMC boards (+)

      Features:

      43927.jpg
      • Unique design and manufacturing technique provides advanced configurability called Board Level Advanced Scalable Technology (BLAST)
      • BLAST accelerates the manufacturing process for customer-specific configurations that normally delay the production cycle and add to production cost
      • Xilinx Virtex-6 provides more usable FPGA resources at substantially reduced power consumption and, therefore, generated heat
  • Nikor  (1)
    • PCIDSP-5501
      High performance digital signal processing module (+)

      Features:

      20225.jpg
      • Plug&Play PCI 2.1 33MHz/32-bit slave, Master/Slave (optional) support
      • Up to 400k gates in Spartan-3 family FPGAs
      • Spartan-3 FPGAs system clock rate up to 320 MHz
  • RF Engines Limited  (3)
    • DSP Cores for FPGA
      Signal processing cores are highly optimized FPGA designs for applications with high sample rates and demanding performance requirements (+)

      Features:

      • Guaranteed bit-true models provided with each core
      • Highly optimized implementations using pipelined architectures
      • Designs tailored to specific bit width and precision requirements
    • SpectraView™ SV900
      RF Engines' SpectraView™ SV900 system is being developed to provide a complete and cost-effective solution for performing real-time spectral analysis of very wideband analog signals. The SV900 is based around the latest high performance digitisers and powerful signal processing hardware, and can be interfaced directly to a standard personal computer. The package includes Advanced Signal Display Software (ASDS), a full-featured PC application that provides the user interface to the analysis system, with a variety of mechanisms for displaying, analysing and storing both time and frequency domain data. (+)

      Features:

      • Cost-effective spectral analysis solution
      • Extremely wideband analysis capabilities
      • Minimal setup and configuration
    • Pipelined Frequency Transform
      A specially developed architecture that is optimized for the real-time signal analysis of ultra wideband signals and transforms the signals from the time domain to the frequency domain as a Fast Fourier Transform (FFT) would do (+)

      Features:

      • Also provides high-performance filtering across hundreds of channels
      • Enables a stack of digital frequency converters or a massively parallel processed pipeline FFT to be replaced with a single chip [...]
  • ELMA Electronic  (1)
    • VPX-300 SystemPak
      The VPX-300 SystemPak is a reference development platform based on 3U VPX architecture (+)

      Features:

      52829.jpg
      • Designed around a Virtex-6 FPGA front end processor (FEP) card
      • Combining data and control plane topology, the architecture supports multi-processor capability via two clusters for front-end and back-end processing
      • The OpenVPXTM standard backplane profile has two separate star sections that are established through a data and control plane switch, handling both PCIe and GigE links
  • Pentland Systems  (3)
    • RAD2
      Digital receiver featuring dual channel, 14-bit resolution with up to 105MSPS sampling speed (+)

      Features:

      16182.jpg
      • Up to 16 individual down-converter channels for I&Q demodulation
      • Xilinx Virtex II FPGA for digital signal processing and A/D control
      • Bi-directional high-speed FIFO buffers
    • MPX501
      2 or 4 Channels Synchro to digital convertor (+)

      Features:

      • Accuracy is ±3 arc mins
      • Synchro input options either 11.8V or 90V
      • Channels individually programmable for 10-16 bit resolution
    • MPX500
      2 or 4 Channels Resolver to digital convertor (+)

      Features:

      • Accuracies are ±2, ±3 or ±4 arc mins
      • Resolver input option either 2V or 11.8V
      • Channels individually programmable for 10-16 bit resolution
  • Quadros Systems, Inc.  (2)
    • RTXC Quadros
      A configurable and scalable RTOS architecture for convergent processing (+)

      Features:

      • Uses two real-time kernels: RTXC/ss, and single-stack, thread-based kernel, and RTXC/ms, a multi-stack task-based kernel
      • Meets the requirements of real-time, control-processing, or Digital Signal Processing (DSP) applications
      • Supported processors: ARM 7/7T, 9/9T, Motorola DSP56F800, Motorola DSP65300/600, Motorola ColdFire family, Motorola PowerPC, Motorola StarCore MSC8101, and Texas Instruments TMS320C54x, TMS320C55x [...]
    • RTXC for DSP 56xxx
      A real-time multi-tasking kernel (RTXC) for Motorola's DSP 56303/307/309/EVM digital signal processors (+)

      Features:

      • Motorola's Suite56 Software Development Tools include a processor simulator, C compiler, assembler and linker, and a hardware debugger
      • This suite of tools and RTXC form a new embedded development environment
      • Features include: (1) small code footprint of about 1,500 to 4,500 words; (2) full source code and no run-time royalties; (3) support of nested interrupts; (4) extensive interrupt handling models and examples; (5) macros to simplify the creation of interrupt service routines; (6) support for mixed assembly language and C programming; and (7) a GUI-driven system generation utility that allows specification and generation of RTXC system objects without having to know the internals of the kernel objects
  • Spectrum Signal Processing  (15 of 20)
    • SDR-3000 SMRDP
      An "RF to Ethernet" wideband military communications (MILCOM) rapid-prototyping and development platform (+)

      Features:

      • Fully integrated, commercial-off-the-shelf (COTS) software defined radio platform
      • A “skinny” version of Spectrum's SDR-3000 MRDP providing a single-slot modem hardware solution
      • Integrates the latest Xilinx Virtex-4 Field Programmable Gate Array (FPGA) technology with Spectrum's proven MPC7410 PowerPC and TMS320C64x( digital signal processing technology
    • flexComm SDR-4000 WML
      Wireless Modem Lite (WML) (+)

      Features:

      • A lower power rugged package that supports the critical modem, link, and network layer processing functions necessary in a software defined radio
      • The Lite version reduces the power required per slot by supporting a selective feature set from Spectrum's SDR-4000 products
      • Specifically designed for tactical Military Communications (MILCOM) applications and provides black-side "IF to Ethernet" digitization and processing of complex waveforms
    • Ingliston
      A quad PCI DSP system based on the 250 MHz, fixed-point 'C6202 processor (+)

      Features:

      3663.jpg
      • 2000 MIPS
      • One PMC mezzanine site
      • Two PEM Mezzanine sites
    • TIM-SDR
      Single-channel digital radio receiver module with software demodulation libraries (+)

      Features:

      • This surveillance solution combines an A/D converter, digital down converter, TMS320C44 DSP processor, and a D/A converter on a single-wide TIM-40 module
      • Designed to work with Spectrum's LeMans VXI product [...]
    • TIM-SDR
      Single-channel digital radio receiver module with software demodulation libraries (+)

      Features:

      • This surveillance solution combines an A/D converter, digital down converter, TMS320C44 DSP processor, and a D/A converter on a single-wide TIM-40 module
      • Designed to work with Spectrum's LeMans VXI product [...]
    • PEM-FPGA
      A high-performance, programmable digital interface that connects Spectrum's ‘C6000-based DSP boards to custom and standard I/O systems (+)

      Features:

      • Provides up to 100 Mbits/sec of I/O bandwidth to each ‘C6000 DSP
      • Total data throughput of 200 Mbits/sec
      • Programmed to interface to virtually any type of digital I/O devices, including digital cameras, motor controllers, and as standard and custom parallel interfaces
    • Smart Antenna Development Platform
      A Smart Antenna Development Platform that leverages upon the reconfigurability, flexibility, and modularity of Spectrum's flexComm solutions (+)

      Features:

      • Targeted at government and commercial users that require increased capacity, extended range, and signal enhancement to get the most out of their infrastructure investment.
      • Supports two to eight receive channels with a 10 MHz bandwidth and can scan the frequency range from 20 MHz to 3 GHz, sufficient for all military communications and cellular bands
      • Provides a direction finding example program that can determine the relative position of an incoming narrowband signal
    • flexComm SDR-4000 TMRDP
      Off-the-shelf platform to develop and deploy their complex tactical MILCOM applications (+)

      Features:

      • Tactical Military Communications (MILCOM) Rapid Deployment Platform (TMRDP)
      • Platform equips quick response teams with an integrated platform designed for the rapid development and deployment of tactical MILCOM applications
      • The commercial-off-the-shelf SDR-4000 TMRDP provides full "RF to Ethernet" functionality of a software defined radio (SDR) with support for the Software Communications Architecture (SCA) in a single 19" rack
    • PEM-2PDC, PEM-4PDC, PMC-MAI
      A DSP-based digital radio PMC mezzanine for use with Spectrum's TMS320C6x-based carrier products (+)

      Features:

      • The PMC-MAI is a 65 M samples/sec analog input PMC, the PEM-2PDC is a dual-programmable down converter module, and the PEM-4PDC is a quad-programmable down converter module
      • Both PEM modules are based on Spectrum's Processor Expansion Module (PEM) open specification
      • For commercial and military signals intelligence or surveillance applications
    • PMC-2MAI Dual A/D Converter PMC Module
      Two 12-bit 65 MSPS A/D converters (+)

      Features:

      • Digital step attenuator allowing input levels from -9 to +6 dBm
      • Digital signal level monitor
      • External input/output clock source
    • LeMans - Octal TMS320C4x VXIbus Master Board
      The LeMans 840 MFLOP octal TMS320C4x VXIbus master board can host up to six single-wide or four double-wide 'C40/44 DSP modules and TIM-40 form factor SRAM, DRAM, EDRAM, or I/O modules (+)

      Features:

      • Supports VXI shared memory, VXI master/slave modes, and 80 Mbytes/sec data transfers via the HP local bus
      • Features JTAG input and output connectors, a test bus controller, and device driver support via VISA or SICL [...]
    • Barcelona-HS
      A 6U, hot-swap CompactPCI board combining DSP multiprocessor hardware and software tools for designing high availability systems (+)

      Features:

      11843.jpg
      • Fixed-point or floating-point DSP signal processing engine
      • Ultra-high bandwidth mezzanine interfaces directly to DSP
      • Compliant with PICMG 2.1 R2.0
    • HCDR-1020
      A high-channel-density receiver system (+)

      Features:

      • High-speed communications fabric based on the Solano Communications IC
      • Two high dynamic range 14-bit, 65 or 80 Msamples/sec analog-to-digital converters
      • Eight Graychip GC4016 devices in a double-width ePMC form factor support 32 narrowband or 8 wideband digital down conversions per VME slot
    • PEM-16MSDDC
      A multi-standard digital down converter module compatible with Spectrum's PEM specification (+)

      Features:

      • Four Graychip GC4016 digital down converters (30 MHz to 65 MHz input)
      • Four Xilinx XCV50 or XCV200 FPGA devices
      • Four 2K x 32-bit FIFO buffers for complex samples
    • PEM-4WDC
      A wideband digital down converter PEM mezzanine (+)

      Features:

      • Accepts two digitized IF streams from Spectrum's PMC-2MAI ADC mezzanine at an input sample rate of up to 65 MHz
      • IF streams are transferred from the PMC-2MAI to the PEM-4WDC on a ribbon cable using LVDS signaling for low power consumption and high noise immunity
      • Double-width PEM provides single slot solution with Monaco and Barcelona platforms and PMC-2MAI 65 MHz A/D converter
  • Pentek, Inc.  (15 of 17)
    • Series 5300 3U VPX Software Radio Boards
      Pentek is offering 14 products in a new family of 3U VPX boards for data acquisition, software radio, and digital signal processing (+)

      Features:

      45507.jpg
      • Maximum data rates to 4 GB/sec with Gen. 2 PCIe protocol
      • Wide range of 3U VPX compact, rugged COTS solutions
      • Fabric-transparent switch enables high-speed data transfers using popular gigabit protocols
    • RTR 2727
      the Model RTR 2727 rugged portable recorder suitable for military and aerospace applications. The system features recording and playback of IF signals up to 700 MHz with signal bandwidths to 200 MHz. It can be configured with 500 MHz 12-bit A/Ds or 400 MHz 14-bit A/Ds and an 800 MHz 16-bit D/A. Pentek’s SystemFlow software allows turnkey operation through a graphical user interface (GUI), while the SystemFlow application programming interface (API) allows easy integration of the recording software into custom applications. (+)

      Features:

      223484716525535130.jpg
      • Designed to operate under conditions of shock and vibration
      • Portable system measuring 16.9" W x 9.5" D x 13.4" H
      • Lightweight: approximately 30 pounds
    • Cobalt 78621
      A data acquisition module for high-performance applications and part of Pentek Inc.'s Cobalt family (+)

      Features:

      • Utilizes Xilinx's Virtex®-6 FPGA family for onboard signal processing
      • Available in both XMC and PCIe formats to satisfy a range of system needs
      • Includes ruggedized XMC-format modules with extended temperature range options for deployed applications such as an unmanned aerial vehicle (UAV) collecting radar and signal intelligence data
    • SigPro 1
      Small Form Factor (SFF) acquisition system that combines OpenVPX devices from Elma Electronic, Pentek, and Concurrent Technologies (+)

      Features:

      • The multivendor platform is targeted at radar, signal processing, high-speed data acquisition, and beamforming applications
      • SigPro 1 is based on the Pentek Cobalt FPGA XMC products with a high-performance analog-to-digital front end and the 803 Series 3U VPX-REDI Corei7 Single Board Computer (SBC) from Concurrent Technologies for processing functions and a storage subsystem that is based on solid-state disk from Elma
      • The new solution uses a three-slot VPX backplane in a conduction-cooled chassis and uses sealed MIL-STD DTL 38999 connectors for I/O
    • Model 71624
      The Model 71624 dual channel, 34 signal, adaptive IF (Intermediate Frequency) relay XMC with a Virtex-6 FPGA. As an IF relay, it accepts two IF analog input channels, modifies up to 34 signals, and then delivers them to two analog IF outputs. Any signal within each IF band can be independently enabled or disabled, and changed in both frequency and amplitude as it passes through the module. The Model 71624 supports many useful functions including signal drop/add/replace, frequency shifting and hopping, amplitude equalization, and bandwidth consolidation. (+)

      Features:

      308688793538844775.jpg
      • Modifies 34 IF signals between input and output
      • Up to 80 MHz IF bandwidth
      • Two 200 MHz 16-bit A/Ds
    • Cobalt 71621
      Three 16-bit, 200 MHz A/Ds, three multiband DDCs (digital downconverters), two 16-bit 800 MHz D/As with DUC (digital upconverter) and interpolator (+)

      Features:

      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Three 200 MHz 16-bit A/Ds
    • 6228
      Four-channel D/A and Digital Upconverter VIM-2 Module (+)

      Features:

      32550.jpg
      • Four 16-bit D/As with 500 MHz max. sampling rate
      • Two digital upconverters with 320 MHz sampling rate
      • 2x to 16x interpolation filters
    • Cobalt Model 71664
      The Model 71664 comes preconfigured with a suite of built-in functions for digital down conversion, data capture, synchronization, time tagging, and formatting, making them ideal turn-key interfaces for radar, communications or general data acquisition applications. IP modules for A/D acquisition, DDC, DDR3 or QDRII+ memories, programmable beamforming, controller for data clocking and synchronization, and a VRT protocol engine are all included. (+)

      Features:

      335617248561987861.jpg
      • Complete radar and software radio interface solution
      • PCIe output supports VITA 49.0 VITA Radio Transport (VRT) Standard
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
    • 7700 Series
      A family of PCI Express boards (+)

      Features:

      42422.jpg
      • Routing Flexibility Designed Specifically for Communications, Software Radio, Radar, Telemetry, and Signal Intelligence Applications
      • Gen 2 PCI Express x16 Interface
      • Latest PC and Blade Server Compatibility
    • Onyx Model 71720
      Model 71720 3-Channel 200 MHz A/D and 2-Channel 800 MHz D/A with Virtex-7 FPGA - XMC (+)

      Features:

      223485199525664546.jpg
      • Supports GateXpress FPGA-PCIe Configuration Manager
      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-7 VXT FPGAs
    • 6235-401
      GateFlow dual wideband 1k FFT receiver VIM-2 module (+)

      Features:

      32551.jpg
      • Dual 12-bit 105 MHz A/Ds
      • Built-in real-time 105 MHz 1k or 4k FFT processor
      • Radar preprocessor
    • Model 7142-428 Digital Transceiver
      Digital Transceiver with Multiband DDC Core and Interpolation Filter (+)

      Features:

      • Ideally suited for military software defined radio systems that require flexible hardware capable of emulating multiple radio waveforms
      • A complete software radio system in a COTS PMC/XMC module
      • Quad DDC IP Core Combines Narrowband and Wideband Functions
    • Model 71800
      Model 71800 Kintex UltraScale FPGA Coprocessor - XMC (+)

      Features:

      3980545186213948700.jpg
      • High-performance co-processor platform
      • Supports Xilinx Kintex UltraScale FPGAs
      • Front panel digital I/O can be used as a status and control or data interface
    • RTS 2707 Talon 4-Channel RF/IF 500 MS/se
      The Talon® RTS 2707 is a turnkey, multiband recording and playback system for recording and reproducing high-bandwidth signals. The RTS 2707 uses 12-bit, 500 MHz A/D converters and provides sustained recording rates up to 1.6 GB/sec in twochannel configuration. (+)

      Features:

      227718616525920308.jpg
      • 4U, 19 inch industrial rackmount PC server chassis
      • Windows® 7 Professional workstation with high performance Intel® Core i7TM processor
      • 500 MHz max 12-bit A/D s or 400 MHz 14-bit A/Ds
    • 6229
      Dual digital upconverter and D/A VIM-2 module (+)

      Features:

      3249.jpg
      • 12-bit 200 MHz D/As
      • Low-pass or band-pass output filters
      • Translates digital signals to RF or IF frequencies up to 80 MHz
  • SP Devices  (1)
    • TIGER DSP
      TIGER DSP is a digital signal processing board featuring a Xilinx Virtex 6 FPGA, data memory, and various host connections. (+)

      Features:

      45623.jpg
      • FPGA: Xilinx Virtex 6 LX240T
      • Peer-to-Peer Streaming
      • Memory size: 1 GByte
  • Extreme Engineering Solutions (X-ES)  (1)
    • XCalibur5090
      The XCalibur5090 is a high-performance, reconfigurable, conduction-cooled 6U LRM module featuring dual Xilinx Virtex-7 FPGAs, high-speed serial interfaces, DAC and ADC channels, external memory, and flexible, high-density I/O. The XCalibur5090 utilizes four AD9739 and two ADC12D1600RF to provide four channels of high-frequency 14-bit Digital Analog Conversion (DAC) at 2500 Mbps and four channels of 12-bit Analog Digital Conversion (ADC) at 3200 Mbps for high-performance Digital Signal Processing (DSP). (+)

      Features:

      314776900022905961.jpg
      • Two Xilinx Virtex-7 XC7VX690T FPGAs
      • Up to 1 GB of DDR3 SDRAM per FPGA in two channels
      • Non-volatile FPGA configuration flash
  • Alphi Technology Corporation  (8)
    • CPCI-AD8/16-200
      Intelligent data acquisition board (+)

      Features:

      • 3U -8-16 A/D Simultaneous Channels
      • 16 Channels, 16 bits, 200KSPS
      • 3U CompactPCI module
    • CPCI-6713-4 IP
      Intelligent Quad IP Carrier-32M SDRAM offering speed, flexibility and up to 192 I/O's on one single Board (+)

      Features:

      38950.jpg
      • High-performance Floating-Point Digital Signal Processor (DSP): TMS320C6713B up to 300 MHz system clock
      • Quad Industry Pack Sites
      • 8/32 MHz operation
    • PCIe-6713-ISC8
      The ALPHI PCIe-ISC8 is an intelligent DSP-based serial communication board (+)

      Features:

      • The PCIe-ISC8 provides mechanical support and the electrical interfaces for an I/O mezzanine board
      • Digital Signal Processor TMS- 320C6713B
      • Quad 16 MHz SCC85230 serial controller with 8 serial channels
    • CPCI-DSC4
      A 4-channel A/D and D/A converter with 16 digital I/O channels (+)

      Features:

      • TMS320C31 DSP control processor
      • 512 Kbytes of zero-wait-state SRAM
      • External or internal scan clock
    • CPCI-6713-4IP
      Supports four (4) independent Industry Pack Modules - 8/32 MHz operation (+)

      Features:

      35829.jpg
      • High performance Floating-Point Digital Signal Processor TMS320C6713B @ 300 MHz
      • 64 KBL2 Unified Cache
      • Mapped RAM and 192 KB Additional L2 Mapped RAM
    • PXI-ADDA
      A 16-bit analog-to-digital/digital-to-analog converter (+)

      Features:

      • Quad channel
      • 16 digital I/O
      • TMS320C31 DSP processor
    • VDSP-31
      Multichannel data acquisition system and digital servo control module (+)

      Features:

      • Designed for control of hydraulic actuators
      • Can be mixed with signal conditioning modules on a per-channel basis
      • Processing resources include 32 MHz TMS320C31 DSP control engine with optional second 32 MHz TMS320C31 DSP
    • VDSP-31
      Multichannel data acquisition system and digital servo control module (+)

      Features:

      • Designed for control of hydraulic actuators
      • Can be mixed with signal conditioning modules on a per-channel basis
      • Processing resources include 32 MHz TMS320C31 DSP control engine with optional second 32 MHz TMS320C31 DSP
  • Hunt Engineering  (1)
    • HERON DSP Systems
      HERON high-performance modular signal processing systems for PCI-based, USB connected, and Embedded use are programmable and reconfigurable, using common APIs to provide compatibility and complete flexibility (+)

      Features:

      33502.jpg
      • Choose one or combine any number of our off-the-shelf modules
      • Modules with Xilinx Virtex FPGA (with external memory options plus digital and analog I/O choices) and TI ‘C6000 DSP
      • Mount selected modules on a HERON module carrier which provides real-time data connections with 400 Mbps possible in each direction simultaneously
  • Nuvoton Technology  (1)
    • WAU8812
      Mono audio Codec for VoIP-telephone, hands-free telephony markets; provides flexibility in performance and power consumption (+)

      Features:

      38376.jpg
      • Robust, high-fidelity, 24-bit signal architecture
      • 93dB Digital-to-Analog Converter (DAC), Signal to Noise Ratio (SNR), and 91dB Analog-to-Digital Converter (ADC) SNR at audio sampling rates from 8 KHz to 48 KHz
      • Industry-leading 6uA standby current, which greatly reduces power consumption and extends battery life in hand-held applications
  • Compel Electronics  (2)
    • Coaxial adapters for monitoring points
      For the direct type, the device is made up of three coaxial interfaces so that an input / output path for the signal in transit and a direct link for monitoring are created (+)

      Features:

      30429.jpg
      • For the uncoupled type, the device is also made up of three coaxial interfaces; the difference lies in the fact that the signal which is picked up to be monitored is uncoupled with respect to the signal in transit through the insertion of an internal resistor which has been appropriately connected
      • Sometimes there is also the need for better adaptation, from an electrical point of view, of the output port of the signal being monitored; in this case a further resistor is appropriately connected, thus obtaining an uncoupled and adapted link
      • As far as the interface coaxial connectors are concerned, the most common types used are the 1.0/2.3 and 1.6/5.6 (male or female)
    • BALUNS
      Impedance adapters allow systems with different impedance levels to be connected (+)

      Features:

      30182.jpg
      • As is well known, the best method for transmitting a signal is to transport it using means with uniform impedance: Any variation or discontinuity leads to great reflections and losses in the signal
      • In modern equipment the need often arises to connect systems with a 75 ohm output (typical in the use of coaxial cables) with systems with a 120 ohm output (typical when using twisted pairs which have been introduced because a high density of connections with cables of reduced dimensions is needed)
      • It becomes necessary, therefore, to adopt a device capable of connecting the two systems in such a way that each uses its own impedance, eliminating the possibility of having substantial losses in the signal
  • GE Intelligent Platforms, Inc.  (15 of 20)
    • AXISLib-CL
      AXISLib-CL Signal and Vector Processing Library providing digital signal processing and mathematical functions (+)

      Features:

      • Comprehensive signal and vector processing functionality
      • Accelerates engineering development
      • Both industry standard VSIPL and proprietary AXISLib0RSPL API provided
    • G4DSP-XD3
      Massive signal and data processor (+)

      Features:

      36791.jpg
      • Four MPC7448 nodes at 1 GHz to 1.4 GHz
      • AccellerX PCI-X architecture
      • Up to 2 GB DDR SDRAM
    • AXISLib-CL
      A platform-independent linkable software Signal and Vector Processing Library (+)

      Features:

      41674.jpg
      • Software development can begin before target hardware is available · Rapid migration from modeling to embedded platform deployment
      • Designed for developers of military and aerospace applications such as radar, sonar, and SIGINT, but is also applicable to any industry – such as medical imaging – where rapid development of sophisticated digital signal- and image processing applications is a requirement
      • Works in conjunction with AXIS, GE Intelligent Platforms Advanced Multiprocessor Integrated Software development environment, designed to dramatically speed and simplify the creation and debugging of sophisticated DSP applications
    • ICS-8560
      The ICS-8560 is a XMC/PMC form factor digital transmitter module intended for Software Defined Radio (SDR) applications (+)

      Features:

      36709.jpg
      • 2 AC-coupled analog outputs, 16-bit resolution (Analog Devices AD9726)
      • FS ≤ 200 MHz (Single Data Rate Mode), Fs ≤ 400 MHz (Double Data Rate Mode)
      • Xilinx Virtex-4 FX60 or FC100 FPGA with multiple IP cores (incl.SDR 200 MHz, DDR 400 MHz)
    • GE Fanuc ICS-1556B
      ADC module (+)

      Features:

      42046.jpg
      • 400 MHz bandwidth
      • 14-bit ADC PMC Module
      • Designed for demanding communication applications such as software defined radio, signals intelligence (SIGINT), digital receivers, and tactical communications where the requirement is to convert analog data into digital information in as close to real-time as possible
    • Tsumani 6U CPCI Development Kit
      FPGA processor solution targeted at high performance software defined radio applications (+)

      Features:

      • Dual Stratix EP1S80 FPGAs are tightly coupled to provide a power platform for signal processing
      • Two PMC module sites provide I/O connectivity to either front panel or back panel connections
      • A direct high bandwidth 1 GBps path from the PMC P4 connector directly to the FPGAs
    • ICS-1650
      High-speed data acquisition and DSP engine for PCI Express-based desktop PCs and servers deployed in SIGINT, communications, radar, medical imaging, and T&M applications (+)

      Features:

      38089.jpg
      • 4-channel, 250 MHz 12-bit ADC
      • Transformer-coupled inputs
      • 50 ohm input impedance
    • ICS-1554
      4-channel, 160 MHz 16-Bit ADC PMC module with Virtex-5 SX95T user programmable FPGA (+)

      Features:

      36712.jpg
      • Four AC-coupled analog inputs
      • Fs ≤ 160 MHz per channel
      • Xilinx Virtex-5 SX95T User Programmable FPGA
    • ICS-8554D
      For use in communications, radar, and test and measurement applications in harsh environments (+)

      Features:

      33318.jpg
      • Suitable applications include military communications, signal intelligence, smart antenna, radar beam forming, wireless test and measurement and satellite ground stations
      • DC-coupled digital receiver
      • Four 14-bit ADCs that sample synchronously at frequencies up to 105 MHz
    • ICS-1554
      4-channel, 160 MHz 16-bit ADC PMC module with Virtex-5 SX95 user programmable FPGA (+)

      Features:

      • Four AC-coupled analog inputs
      • FS < 160 MHz per channel
      • Xilinx Virtex-5 SX95 User Programmable FPGA
    • ICS-1556
      4-channel, 400 MHz 14-bit ADC PMC module with Virtex-5 SX95T user programmable FPGA (+)

      Features:

      • 4 transformer-coupled analog inputs
      • Analog-to-digital resolution 14-bits
      • Fs≤ 400 MHz per channel
    • TS-PMC A30
      FPGA processor solution targeted at high performance military and commercial computing applications (+)

      Features:

      20869.jpg
      • Stratix FPGA and high bandwidth capability PCI Mezzanine Card
      • Ideal for video and image processing, software defined radio, radar, sonar as well as other high performance signal processing applications
      • Flexibility of front or rear panel connections [...]
    • AXISLib-RSPL
      Performance Optimized Signal Processing Library (+)

      Features:

      • Optimized for GE Intelligent Platforms PowerPC/AltiVec enabled platforms
      • Standalone or integrated within the AXIS software environment
      • Comprehensive signal and vector processing functionality
    • AXISLib-VSIPL
      Performance optimized vector signal image processing library (+)

      Features:

      • Optimized for GE Intelligent Platforms PowerPC/AltiVec enabled platforms
      • Standalone or integrated within the AXIS software environment
      • Comprehensive vector, signal and image processing functionality with 512+ functions supported
    • AXISView
      Multiprocessor productivity tools, integrating system development and debug environments (+)

      Features:

      • Intuitive, easy to use graphical tools providing visualization of multiprocessor systems
      • Fully integrated tools minimizing time from development to deployment
      • Maximizes performance through interactive monitoring
  • Integrated Device Technology, Inc.  (1)
    • IDT PanelPort VPP11
      Fully compliant with the DisplayPort 1.1a standard for LCD TVs, projectors and high-end monitors (+)

      Features:

      • Offers original equipment manufacturers (OEMs) an increased level of digital signal integrity by significantly reducing electromagnetic interference (EMI) on all monitor or display device interfaces by utilizing IDT spread spectrum clocking technology
      • Able to achieve this level of digital signal integrity through its unique incorporation of in-house customizable serializer/deserializer (SerDes) and industry-leading IDT serial interface technologies
      • Fully compliant with the DisplayPort 1.1a standard and allows IDT customers to connect their multimedia devices to any type and size of monitor with an external DisplayPort connection, providing them with greater display options
  • RidgeRun, Inc.  (1)
    • DSPLinux SDK
      A software development kit based on Texas Instruments' TMS320DSC2 DSP (+)

      Features:

      • Provides developers access to the complete DSPLinux simulation and hardware environment through DevelopOnline
      • DSPLinux is optimized for multimedia applications in which DSP's offer high processing power with low battery consumption
      • Focused on dual-core ARM+DSP architectures, with the Linux kernel residing on the ARM processor to control the operation of the DSP
12/7/22 13:52
Close

Subscribe to DSP updates