DSP

Showing results for: digital signal processors
Refine DSP companies and products:
dsp digital signal processor digital signal processing dsp engine radar digital signal processing dsp software dsp hardware dsp system dsp systems radar signal processor digital signal processors discontinuous signal digital signal processin a/d d/a
Click on any vendor
to see a listing of
digital signal processors related products.
  • AcQ InduCom  (6)
    • VME383
      A DSP DAC for high-speed analog signal regeneration and digital signal processing (+)

      Features:

      • 6U VMEbus board
      • Four TMS320C32 floating point DSPs running at 60 MHz, delivering 30 MIPS
      • Three high-speed 16-bit D/A channels per DSP
    • CPCI381
      A 3U CompactPCI board providing a powerful platform for high-speed analog signal capturing and digital signal processing (+)

      Features:

      11141.jpg
      • TMS320C32 floating point DSP, running at 60 MHz, delivering 30 MIPS
      • Two simultaneous sampling 12-bit A/D channels
      • Programmable sampling rate up to 7.5 Msamples/sec
    • VME381
      A DSP ADC for high-speed analog signal capturing and digital signal processing (+)

      Features:

      • 6U VMEbus board
      • Four TMS320C32 DSPs, each with 2 analog input channels, running at 60 MHz, delivering 30 MIPS
      • Two simultaneous sampling 12-bit A/D channels per DSP
    • M383 DSP M-module
      Provides a powerful platform for high-speed analog signal (re) generation and digital signal processing (+)

      Features:

      • Three analog output channels share the 10 MSps output update rate
      • Local software allows enhanced and user-specific signal processing
      • Eight general-purpose digital I/Os (4x input, 4x output, TTL-compatible) are available [...]
    • M381 DSP M-module
      Provides a powerful platform for high-speed analog signal capturing and digital signal processing (+)

      Features:

      • Two analog input channels are capable of simultaneously sampling at (maximum) 7.5 MSps sampling rate
      • Local software allows enhanced and user-specific signal processing
      • Gain and offset errors are compensated by the DSP
    • CPCI383
      A 3U CompactPCI board providing a powerful platform for high-speed analog signal (re)generation and digital signal processing (+)

      Features:

      11143.jpg
      • TMS320C32 floating point DSP, running at 60 MHz, delivering 30 MIPS
      • Three high-speed, 16-bit D/A channels
      • Analog output rate is software programmable up to 7.5 Msamples/sec (using DMA, single channel)
  • Agilent Technologies  (5)
    • COTS VME/VXS Boards
      A new family of COTS VME/VXS (VITA 41 form factor) boards combining state-of-the-art Xilinx Virtex-4 SX and FX functionalities with advanced Acqiris data conversion technology (+)

      Features:

      32078.jpg
      • Incorporates Acqiris' JetSpeed II technology for clock generation and distribution
      • Feature two Xilinx Virtex-4 FPGAs, one SX55 targeted at digital signal processing and one FX100 for data flow control
      • Provides support for the VXS interface, two optical links on the front panel, a VME64x interface as well as DDR2 SDRAM memory and auxiliary analog and digital I/Os
    • E1430A
      2 pass, or subranging, 10 Msamples/sec ADC with 23 bits of resolution (+)

      Features:

      • A single-slot, single channel, C-size, VXI card that is a complete A/D module
      • Included in the module with the low distortion, low noise analog to digital converter, is flexible input signal conditioning, tunable digital filtering, an 8-Mbyte memory, and a high-speed local bus
      • Input signal conditioning includes 11 attenuation/gain ranges, AC/DC coupling and an analog anti-alias filter
    • Infiniimax 1130A
      A 1.5 GHz differential probe (+)

      Features:

      17118.jpg
      • Can be paired with Agilent's Infiniium Mixed Signal (MSO) and Digital Signal Oscilloscopes (DSO) for validating and verifying the performance of new high-speed digital product designs
      • Single-ended or differential measurements from a single probe amplifier
      • Controlled transmission-line probe heads provide a flat frequency response over the entire bandwidth specification and eliminate the distortion and loading that affects probes with in-band resonance
    • 81600
      A Infiniium DCA oscilloscope (+)

      Features:

      • TDR capability enables verification of the signal integrity of printed circuit boards, cables, and connectors that incorporate InfiniBand technology
      • Plugins are available that provide up to 80 GHz bandwidth and single-ended and differential TDR measurements [...]
    • PSA-80BW
      A wide-bandwidth, vector spectrum analyzer solution (+)

      Features:

      • Provides 80-MHz demodulation bandwidth and eight-second capture memory for multi-carrier power amplifier (MCPA), signal monitoring, radar, and satellite measurement applications
      • Up to 20 GHz frequency coverage, 0.1dB amplitude flatness, 0.7 degree phase flatness, and optional 1.2 Gbyte (768 Msamples) deep capture memory to provide eight seconds of full-bandwidth capture at the maximum sample rate
      • Well suited for error vector modulation (EVM)
  • Altera Corporation  (2)
    • Nios II, Stratix
      Internal clock frequency rates up to 500 MHz and typical performance >250 MHz (+)

      Features:

      19250.jpg
      • Deliver on average 50% faster performance and more than 2x the logic capacity than first-generation Stratix FPGAs
      • Deliver 50x higher multiplier bandwidth than single-chip, standalone digital signal processors
      • The DSP blocks have the flexibility and performance to implement fast, arithmetic-intensive applications such as image processing, wireless communications, military, broadcast, and medical
    • Nios II, Cyclone
      Optimized for low cost, extending the reach of FPGAs further into cost-sensitive, high-volume applications (+)

      Features:

      33543.jpg
      • Customer-defined feature set, industry-leading performance, and low power consumptio
      • Greatly increased density and more features, all at significantly lower cost
      • 150 embedded 18 x 18 multipliers
  • Artesyn Embedded Technologies  (1)
    • PCIE-8120
      The PCIE-8120 media processing accelerator enables high density voice and video processing to be integrated into a rack mounted server or other network appliances that have full size PCI express slots. Featuring up to 12 power-efficient Digital Signal Processors with optimized software, PCIE-8120 can support over 7500 ports of G.729AB or six 4-party HD720p video conferences. (+)

      Features:

      226668655949364174.jpg
      • Single slot full length full height PCI express card with x4 interface
      • High performance media processing core based on power-efficient DSPs
      • Optional 2 x GbE ports (RJ45) with NAT function for direct network attachment providing server offload.
  • CommAgility  (2)
    • AMC-2C6616/AMC-2C66
      AdvancedMC modules based on the latest high-performance TMS320TCI6616 base station System-on-Chip (SoC) and TMS320C6670 digital signal processor (DSP) from Texas Instruments Incorporated (TI) (+)

      Features:

      • The two modules harness the industry-leading power of TI's new devices and add high-speed, flexible I/O to deliver solutions for wireless base station and high-performance applications
      • The modules also include a Xilinx LX240T Virtex-6TM FPGA for additional I/O and co-processing flexibility
      • The AMC-2C6616 incorporates TI's new CI6616 SoC base station, and is targeted at LTE wireless base station applications, including development, trials and final deployment in the field
    • AMC-D1F1-1200
      An AdvancedMC module that offers a compact, high-performance DSP/FPGA signal processing solution for AdvancedTCA and MicroTCA systems (+)

      Features:

      36707.jpg
      • Texas Instruments TMS320C6455 digital signal processor running at 1.2 GHz and a Virtex-4 FX100 FPGA from Xilinx
      • Optimized for applications requiring high-end signal I/O bandwidth in a compact mid-height AMC form factor, such as wireless baseband, image processing, defense, and aerospace
      • Provides a combination of DSP and FPGA resources, with fast and flexible links to external data and over 256 MB of onboard memory
  • Compel Electronics  (2)
    • Coaxial adapters for monitoring points
      For the direct type, the device is made up of three coaxial interfaces so that an input / output path for the signal in transit and a direct link for monitoring are created (+)

      Features:

      30429.jpg
      • For the uncoupled type, the device is also made up of three coaxial interfaces; the difference lies in the fact that the signal which is picked up to be monitored is uncoupled with respect to the signal in transit through the insertion of an internal resistor which has been appropriately connected
      • Sometimes there is also the need for better adaptation, from an electrical point of view, of the output port of the signal being monitored; in this case a further resistor is appropriately connected, thus obtaining an uncoupled and adapted link
      • As far as the interface coaxial connectors are concerned, the most common types used are the 1.0/2.3 and 1.6/5.6 (male or female)
    • BALUNS
      Impedance adapters allow systems with different impedance levels to be connected (+)

      Features:

      30182.jpg
      • As is well known, the best method for transmitting a signal is to transport it using means with uniform impedance: Any variation or discontinuity leads to great reflections and losses in the signal
      • In modern equipment the need often arises to connect systems with a 75 ohm output (typical in the use of coaxial cables) with systems with a 120 ohm output (typical when using twisted pairs which have been introduced because a high density of connections with cables of reduced dimensions is needed)
      • It becomes necessary, therefore, to adopt a device capable of connecting the two systems in such a way that each uses its own impedance, eliminating the possibility of having substantial losses in the signal
  • CSP Inc. (CSPI) MultiComputer Division  (1)
    • 3220Q OpenVPX Intel Blade
      The 3220Q is a rugged high-performance 6U OpenVPX Blade, with a dual socket Intel® Xeon® processor and QuickPath Interconnect (QPI) to deliver superior performance-per-watt and low latency. Operating as a general purpose compute engine, it is one of the fundamental building blocks in the CSPI TeraXP family of Embedded Servers. The 3220Q supports Red Hat Enterprise MRG delivering real-time capabilities and high speed messaging in a commercial off the shelf (COTS) Linux based operating system. Featuring an Open Software Stack (OpenMPI/OFED, AMQP) and a Converged Fabric (supporting FDR InfiniBand, 10/40GbE, Fibre Channel) the TeraXP Embedded Servers provide the scalable processing power and I/O bandwidth needed for embedded military computing applications such as radar, sonar, digital signal processing, command and control, and ISR. Dual Socket Intel® Xeon® Processors: (+)

      Features:

      • 4 Cores/8 Threads per socket
      • 8 MB On-chip L3 Cache per socket
      • 2.13 GHz Core Clock
  • Curtiss-Wright  (7)
    • CHAMP-AV8
      Rugged, high performance OpenVPX DSP (digital signal processing) engine based on Intel next-generation quad-core processor technology (+)

      Features:

      46882.jpg
      • High-performance floating-point processing for digital signal processing
      • (DSP) and general purpose applications
      • 6U OpenVPX-compliant
    • VPX3-453 3U VPX Virtex-6/8640D DSP
      The VPX3-453 is a high performance, small form factor DSP engine that combines a Xilinx® Virtex®-6 FPGA and a Freescale® Power Architecture MPC8640D processor. This small form-factor 3U VPX (VITA 46/48) card is ideal for SWaP-constrained environments and is designed to support the full -40 + 85 deg C rugged operating temperature range. The VPX3-453 speeds and simplifies the integration of advanced DSP and image processing into embedded systems designed for demanding Radar Processing, Signal Intelligence, ISR, Image Processing, and Electronic Warfare applications. (+)

      Features:

      217438257121131374.jpg
      • One user-programmable Xilinx Virtex-6 FPGA node (LX240T)
      • One Dual-core Freescale Power Architecture MPC8640 processor
      • On-board Gen2 PCIe switch
    • FPE650 FPGA VPX
      A quad FPGA processor card which combines high bandwidth I/O, achieved through VPX/VPX-REDI and FMC/VITA 57 sites (+)

      Features:

      36805.jpg
      • Designed for the most demanding digital signal processing applications such as electronic counter measures, signal intelligence, and electro-optics
      • Four Xilinx LXT, SXT, or FXT Virtex-5 FPGAs
      • 4x Xilinx Virtex-5 FPGAs (SX95T, LX155T, FX100T)
    • CHAMP-WB 6U OpenVPX Virtex-7 FPGA Card
      The Curtiss-Wright CHAMP-WB is a user-programmable Xilinx Virtex-7 FPGA-based computing product designed to meet the needs of challenging embedded high-performance digital signal and image processing applications. The CHAMP-WB is targeted specifically at wide-band, low latency applications that require large FPGA processing, wide input/output requirements, with minimal latency. (+)

      Features:

      226605770407897699.jpg
      • OpenVPX (VITA 65) profile MOD6-PAY-4F1Q2U2T-12.2.1-11, VPX REDI (VITA 48 option)
      • Digital Signal Processor with Single user-programmable Xilinx Virtex-7 FPGAs (X690T or X980T)
      • 8 GB DDR3L SDRAM in two banks
    • Continuum Vector
      Continuum Vector provides a comprehensive set of C-callable functions which have been optimized to exploit the performance of the AltiVec in Freescale 74xx and 864x processors (+)

      Features:

      • Signal Processing Library
      • Optimized for PowerPC with AltiVec
      • Industry-standard APIs and open- standard APIs including VSIPL
    • CHAMP-AV IV
      The third generation of our quad PowerPC DSP boards with the QuadFlow architecture providing high bandwidth connections between four 7447A/7448 processors (+)

      Features:

      35365.jpg
      • Quad PowerPC 7447A/7448 processors at up to 1.25 GHz
      • Up to 512 MB DDR-250 SDRAM with ECC per processor (2 GB total) and 64 Kbytes L1 and 1 Mbyte (7448) L2 internal caches operating at core processor speed
      • QuadFlow architecture with 3.2 GB/s peak on-board throughput
    • CHAMP-FX4 6U OpenVPX Virtex-7
      The CHAMP-FX4 is the flagship 6U product in Curtiss-Wright Defense Solutions’ family of user programmable Xilinx® Virtex®-7 FPGA-based computing products, designed to meet the needs of challenging embedded high performance digital signal and image processing applications. Curtiss Wright’s 4th generation 6U FPGA card, the CHAMP FX4 combines the dense processing resources of three large Xilinx Virtex-7 FPGAs with over 12 GB of memory resources, all on a rugged 6U OpenVPX (VITA 65) form factor module. (+)

      Features:

      292163107861464693.jpg
      • Over 100 GB/s of backplane I/O bandwidth
      • Gen2 Serial RapidIO (SRIO) provides standards-based connectivity to general-purpose processing boards such as the VPX6-1957 and CHAMP-AV8
      • Two FMC interfaces with 80 differential signal pairs
  • Extreme Engineering Solutions (X-ES)  (1)
    • XCalibur5090
      The XCalibur5090 is a high-performance, reconfigurable, conduction-cooled 6U LRM module featuring dual Xilinx Virtex-7 FPGAs, high-speed serial interfaces, DAC and ADC channels, external memory, and flexible, high-density I/O. The XCalibur5090 utilizes four AD9739 and two ADC12D1600RF to provide four channels of high-frequency 14-bit Digital Analog Conversion (DAC) at 2500 Mbps and four channels of 12-bit Analog Digital Conversion (ADC) at 3200 Mbps for high-performance Digital Signal Processing (DSP). (+)

      Features:

      314776900022905961.jpg
      • Two Xilinx Virtex-7 XC7VX690T FPGAs
      • Up to 1 GB of DDR3 SDRAM per FPGA in two channels
      • Non-volatile FPGA configuration flash
  • GE Intelligent Platforms, Inc.  (15 of 19)
    • AXISLib-CL
      AXISLib-CL Signal and Vector Processing Library providing digital signal processing and mathematical functions (+)

      Features:

      • Comprehensive signal and vector processing functionality
      • Accelerates engineering development
      • Both industry standard VSIPL and proprietary AXISLib0RSPL API provided
    • AXISLib-CL
      A platform-independent linkable software Signal and Vector Processing Library (+)

      Features:

      41674.jpg
      • Software development can begin before target hardware is available · Rapid migration from modeling to embedded platform deployment
      • Designed for developers of military and aerospace applications such as radar, sonar, and SIGINT, but is also applicable to any industry – such as medical imaging – where rapid development of sophisticated digital signal- and image processing applications is a requirement
      • Works in conjunction with AXIS, GE Intelligent Platforms Advanced Multiprocessor Integrated Software development environment, designed to dramatically speed and simplify the creation and debugging of sophisticated DSP applications
    • GE Fanuc ICS-1556B
      ADC module (+)

      Features:

      42046.jpg
      • 400 MHz bandwidth
      • 14-bit ADC PMC Module
      • Designed for demanding communication applications such as software defined radio, signals intelligence (SIGINT), digital receivers, and tactical communications where the requirement is to convert analog data into digital information in as close to real-time as possible
    • AXISLib-GPU
      DSP/Math Library for NVIDIA Many-Core GPU Platforms (+)

      Features:

      • Optimize your performance with GE Intelligent Platforms' new AXISLib-GPU – a Signal and Vector Processing Library that supports the development and deployment of high-performance DSP and multiprocessing applications on GE's NVIDIA CUDA-enabled GPGPU (general purpose processing on a graphics processing unit) platforms
      • Typical applications include radar, sonar, image processing, signals intelligence and ISR (intelligence, surveillance, reconnaissance)
      • The AXISLib family of performance-optimized DSP and math libraries includes AXISLib for Power Architecture, our recently announced AXISLib-x86 for systems based on Intel processors as well as AXISLib-GPU, which can operate as stand-alone modules or within the AXIS Advanced Multiprocessor Integrated Software development environment [...]
    • ICS-8560
      The ICS-8560 is a XMC/PMC form factor digital transmitter module intended for Software Defined Radio (SDR) applications (+)

      Features:

      36709.jpg
      • 2 AC-coupled analog outputs, 16-bit resolution (Analog Devices AD9726)
      • FS ≤ 200 MHz (Single Data Rate Mode), Fs ≤ 400 MHz (Double Data Rate Mode)
      • Xilinx Virtex-4 FX60 or FC100 FPGA with multiple IP cores (incl.SDR 200 MHz, DDR 400 MHz)
    • ICS-1650
      High-speed data acquisition and DSP engine for PCI Express-based desktop PCs and servers deployed in SIGINT, communications, radar, medical imaging, and T&M applications (+)

      Features:

      38089.jpg
      • 4-channel, 250 MHz 12-bit ADC
      • Transformer-coupled inputs
      • 50 ohm input impedance
    • AXISLib-RSPL
      Performance Optimized Signal Processing Library (+)

      Features:

      • Optimized for GE Intelligent Platforms PowerPC/AltiVec enabled platforms
      • Standalone or integrated within the AXIS software environment
      • Comprehensive signal and vector processing functionality
    • AXISLib-VSIPL
      Performance optimized vector signal image processing library (+)

      Features:

      • Optimized for GE Intelligent Platforms PowerPC/AltiVec enabled platforms
      • Standalone or integrated within the AXIS software environment
      • Comprehensive vector, signal and image processing functionality with 512+ functions supported
    • ICS-1554
      4-channel, 160 MHz 16-Bit ADC PMC module with Virtex-5 SX95T user programmable FPGA (+)

      Features:

      36712.jpg
      • Four AC-coupled analog inputs
      • Fs ≤ 160 MHz per channel
      • Xilinx Virtex-5 SX95T User Programmable FPGA
    • ICS-8554D
      For use in communications, radar, and test and measurement applications in harsh environments (+)

      Features:

      33318.jpg
      • Suitable applications include military communications, signal intelligence, smart antenna, radar beam forming, wireless test and measurement and satellite ground stations
      • DC-coupled digital receiver
      • Four 14-bit ADCs that sample synchronously at frequencies up to 105 MHz
    • ICS-1554
      4-channel, 160 MHz 16-bit ADC PMC module with Virtex-5 SX95 user programmable FPGA (+)

      Features:

      • Four AC-coupled analog inputs
      • FS < 160 MHz per channel
      • Xilinx Virtex-5 SX95 User Programmable FPGA
    • ICS-1556
      4-channel, 400 MHz 14-bit ADC PMC module with Virtex-5 SX95T user programmable FPGA (+)

      Features:

      • 4 transformer-coupled analog inputs
      • Analog-to-digital resolution 14-bits
      • Fs≤ 400 MHz per channel
    • AXISView
      Multiprocessor productivity tools, integrating system development and debug environments (+)

      Features:

      • Intuitive, easy to use graphical tools providing visualization of multiprocessor systems
      • Fully integrated tools minimizing time from development to deployment
      • Maximizes performance through interactive monitoring
    • Nexus Quattro
      A quad-processor 6U VME board based on four Freescale MPC7448 processors at up to 1.4 GHz or four MPC7447A processors at 1.1 GHz (+)

      Features:

      • Available in versions for both rugged and benign environments
      • Provides performance and computing density typically required by radar, sonar, signals intelligence, and image processing applications deployed in harsh operational environments
      • Features a flexible asymmetric multiprocessing architecture that allows the four processors to operate as independent computing nodes
    • daqNet
      Acoustic Data Conversion System (+)

      Features:

      33566.jpg
      • Fully integrated acoustic server in a compact rackmount 1U chassis
      • Up to 192 channels of acoustic I/O or 240 channels of digital I/O
      • Dual Gigabit Ethernet interfaces for data I/O and control
  • Hunt Engineering  (1)
    • HERON DSP Systems
      HERON high-performance modular signal processing systems for PCI-based, USB connected, and Embedded use are programmable and reconfigurable, using common APIs to provide compatibility and complete flexibility (+)

      Features:

      33502.jpg
      • Choose one or combine any number of our off-the-shelf modules
      • Modules with Xilinx Virtex FPGA (with external memory options plus digital and analog I/O choices) and TI ‘C6000 DSP
      • Mount selected modules on a HERON module carrier which provides real-time data connections with 400 Mbps possible in each direction simultaneously
  • Integrated Device Technology, Inc.  (1)
    • IDT PanelPort VPP11
      Fully compliant with the DisplayPort 1.1a standard for LCD TVs, projectors and high-end monitors (+)

      Features:

      • Offers original equipment manufacturers (OEMs) an increased level of digital signal integrity by significantly reducing electromagnetic interference (EMI) on all monitor or display device interfaces by utilizing IDT spread spectrum clocking technology
      • Able to achieve this level of digital signal integrity through its unique incorporation of in-house customizable serializer/deserializer (SerDes) and industry-leading IDT serial interface technologies
      • Fully compliant with the DisplayPort 1.1a standard and allows IDT customers to connect their multimedia devices to any type and size of monitor with an external DisplayPort connection, providing them with greater display options
  • Metrowerks Corporation  (1)
    • CodeWarrier for StarCore v1.0
      An integrated suite of development tools designed specifically for the MSC8101 digital signal processors (+)

      Features:

      • Optimized for networking and communications applications
      • All of the tools work the same way for different microcontrollers [...]
  • Neff Instrument Corporation  (1)
    • Dynamic Signal Acquisition
      Individual digital signal processors complete with transducer conditioning including programmable excitation, excitation readback, and auto-identification of channel configuration; programmable gain amplifier; built-in autocalibration; programmable filter cutoff frequency; rolloff rates greater than 290 dB per octave; ADC per channel; bandwidth to 14 KHz; channel sampling rates to 37 KHz; and aggregate throughput rate to 2 Msamples/sec (+)

      Features:

      • Digital filters guarantee phase matching [...]
  • Nikor  (1)
    • PCIDSP-5501
      High performance digital signal processing module (+)

      Features:

      20225.jpg
      • Plug&Play PCI 2.1 33MHz/32-bit slave, Master/Slave (optional) support
      • Up to 400k gates in Spartan-3 family FPGAs
      • Spartan-3 FPGAs system clock rate up to 320 MHz
  • Nuvoton Technology  (1)
    • WAU8812
      Mono audio Codec for VoIP-telephone, hands-free telephony markets; provides flexibility in performance and power consumption (+)

      Features:

      38376.jpg
      • Robust, high-fidelity, 24-bit signal architecture
      • 93dB Digital-to-Analog Converter (DAC), Signal to Noise Ratio (SNR), and 91dB Analog-to-Digital Converter (ADC) SNR at audio sampling rates from 8 KHz to 48 KHz
      • Industry-leading 6uA standby current, which greatly reduces power consumption and extends battery life in hand-held applications
  • Pentek, Inc.  (14)
    • Series 5300 3U VPX Software Radio Boards
      Pentek is offering 14 products in a new family of 3U VPX boards for data acquisition, software radio, and digital signal processing (+)

      Features:

      45507.jpg
      • Maximum data rates to 4 GB/sec with Gen. 2 PCIe protocol
      • Wide range of 3U VPX compact, rugged COTS solutions
      • Fabric-transparent switch enables high-speed data transfers using popular gigabit protocols
    • RTR 2727
      the Model RTR 2727 rugged portable recorder suitable for military and aerospace applications. The system features recording and playback of IF signals up to 700 MHz with signal bandwidths to 200 MHz. It can be configured with 500 MHz 12-bit A/Ds or 400 MHz 14-bit A/Ds and an 800 MHz 16-bit D/A. Pentek’s SystemFlow software allows turnkey operation through a graphical user interface (GUI), while the SystemFlow application programming interface (API) allows easy integration of the recording software into custom applications. (+)

      Features:

      223484716525535130.jpg
      • Designed to operate under conditions of shock and vibration
      • Portable system measuring 16.9" W x 9.5" D x 13.4" H
      • Lightweight: approximately 30 pounds
    • Cobalt 78621
      A data acquisition module for high-performance applications and part of Pentek Inc.'s Cobalt family (+)

      Features:

      • Utilizes Xilinx's Virtex®-6 FPGA family for onboard signal processing
      • Available in both XMC and PCIe formats to satisfy a range of system needs
      • Includes ruggedized XMC-format modules with extended temperature range options for deployed applications such as an unmanned aerial vehicle (UAV) collecting radar and signal intelligence data
    • SigPro 1
      Small Form Factor (SFF) acquisition system that combines OpenVPX devices from Elma Electronic, Pentek, and Concurrent Technologies (+)

      Features:

      • The multivendor platform is targeted at radar, signal processing, high-speed data acquisition, and beamforming applications
      • SigPro 1 is based on the Pentek Cobalt FPGA XMC products with a high-performance analog-to-digital front end and the 803 Series 3U VPX-REDI Corei7 Single Board Computer (SBC) from Concurrent Technologies for processing functions and a storage subsystem that is based on solid-state disk from Elma
      • The new solution uses a three-slot VPX backplane in a conduction-cooled chassis and uses sealed MIL-STD DTL 38999 connectors for I/O
    • Model 71624
      The Model 71624 dual channel, 34 signal, adaptive IF (Intermediate Frequency) relay XMC with a Virtex-6 FPGA. As an IF relay, it accepts two IF analog input channels, modifies up to 34 signals, and then delivers them to two analog IF outputs. Any signal within each IF band can be independently enabled or disabled, and changed in both frequency and amplitude as it passes through the module. The Model 71624 supports many useful functions including signal drop/add/replace, frequency shifting and hopping, amplitude equalization, and bandwidth consolidation. (+)

      Features:

      308688793538844775.jpg
      • Modifies 34 IF signals between input and output
      • Up to 80 MHz IF bandwidth
      • Two 200 MHz 16-bit A/Ds
    • Cobalt 71621
      Three 16-bit, 200 MHz A/Ds, three multiband DDCs (digital downconverters), two 16-bit 800 MHz D/As with DUC (digital upconverter) and interpolator (+)

      Features:

      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Three 200 MHz 16-bit A/Ds
    • 6228
      Four-channel D/A and Digital Upconverter VIM-2 Module (+)

      Features:

      32550.jpg
      • Four 16-bit D/As with 500 MHz max. sampling rate
      • Two digital upconverters with 320 MHz sampling rate
      • 2x to 16x interpolation filters
    • Cobalt Model 71664
      The Model 71664 comes preconfigured with a suite of built-in functions for digital down conversion, data capture, synchronization, time tagging, and formatting, making them ideal turn-key interfaces for radar, communications or general data acquisition applications. IP modules for A/D acquisition, DDC, DDR3 or QDRII+ memories, programmable beamforming, controller for data clocking and synchronization, and a VRT protocol engine are all included. (+)

      Features:

      335617248561987861.jpg
      • Complete radar and software radio interface solution
      • PCIe output supports VITA 49.0 VITA Radio Transport (VRT) Standard
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
    • 7700 Series
      A family of PCI Express boards (+)

      Features:

      42422.jpg
      • Routing Flexibility Designed Specifically for Communications, Software Radio, Radar, Telemetry, and Signal Intelligence Applications
      • Gen 2 PCI Express x16 Interface
      • Latest PC and Blade Server Compatibility
    • Onyx Model 71720
      Model 71720 3-Channel 200 MHz A/D and 2-Channel 800 MHz D/A with Virtex-7 FPGA - XMC (+)

      Features:

      223485199525664546.jpg
      • Supports GateXpress FPGA-PCIe Configuration Manager
      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-7 VXT FPGAs
    • Model 7142-428 Digital Transceiver
      Digital Transceiver with Multiband DDC Core and Interpolation Filter (+)

      Features:

      • Ideally suited for military software defined radio systems that require flexible hardware capable of emulating multiple radio waveforms
      • A complete software radio system in a COTS PMC/XMC module
      • Quad DDC IP Core Combines Narrowband and Wideband Functions
    • 6229
      Dual digital upconverter and D/A VIM-2 module (+)

      Features:

      3249.jpg
      • 12-bit 200 MHz D/As
      • Low-pass or band-pass output filters
      • Translates digital signals to RF or IF frequencies up to 80 MHz
    • SystemFlow for Talon Recorders
      SystemFlow is the software interface that is integrated into every Talon recorder. The software includes the graphical user interface (GUI) that is used to control the recorder with point-and-click configuration management, a client/server communication interface, NTFS file system support and an application programming interface (API) for custom user applications and control. Signal analysis tools include a virtual oscilloscope, spectrum analyzer, and spectrogram to monitor signals before, during, and after data collection. (+)

      Features:

      3697978106213499552.jpg
      • Provides Ease-of-Use Features and Capability Improvements
      • Targets Specialized Recording Modes for Mission-Critical Applications Enhances GPS Functions for Target Triangulation and Time Stamping
      • Offers Additional Data Spectrum Display Modes
    • RTR 2623
      The RTR 2623 6 GHz RF SentinelTM Intelligent Signal Scanning portable, rugged recorder. The RTR 2623 combines and exploits the power of a Pentek Talon recording system with a fully integrated 6 GHz RF down converter. The Sentinel capability adds intelligent signal scanning with real-time signal monitoring and detection that is fully user configurable. . (+)

      Features:

      353733747621633852.jpg
      • Search and capture system using Pentek’s SentinelTM Intelligent Signal Scanner
      • Captures RF signals up to 6 GHz
      • Capture and scan bandwidths up to 40 MHz
  • Pentland Systems  (3)
    • RAD2
      Digital receiver featuring dual channel, 14-bit resolution with up to 105MSPS sampling speed (+)

      Features:

      16182.jpg
      • Up to 16 individual down-converter channels for I&Q demodulation
      • Xilinx Virtex II FPGA for digital signal processing and A/D control
      • Bi-directional high-speed FIFO buffers
    • MPX501
      2 or 4 Channels Synchro to digital convertor (+)

      Features:

      • Accuracy is ±3 arc mins
      • Synchro input options either 11.8V or 90V
      • Channels individually programmable for 10-16 bit resolution
    • MPX500
      2 or 4 Channels Resolver to digital convertor (+)

      Features:

      • Accuracies are ±2, ±3 or ±4 arc mins
      • Resolver input option either 2V or 11.8V
      • Channels individually programmable for 10-16 bit resolution
  • Pickering Interfaces Ltd.  (1)
    • 41-100-001
      Frequency Counter (+)

      Features:

      • Peak Power Meter
      • Time Interval Analyzer of Pulsed RF Input
      • Continuous or Pulsed RF Input Signal
  • Quadros Systems, Inc.  (2)
    • RTXC for DSP 56xxx
      A real-time multi-tasking kernel (RTXC) for Motorola's DSP 56303/307/309/EVM digital signal processors (+)

      Features:

      • Motorola's Suite56 Software Development Tools include a processor simulator, C compiler, assembler and linker, and a hardware debugger
      • This suite of tools and RTXC form a new embedded development environment
      • Features include: (1) small code footprint of about 1,500 to 4,500 words; (2) full source code and no run-time royalties; (3) support of nested interrupts; (4) extensive interrupt handling models and examples; (5) macros to simplify the creation of interrupt service routines; (6) support for mixed assembly language and C programming; and (7) a GUI-driven system generation utility that allows specification and generation of RTXC system objects without having to know the internals of the kernel objects
    • RTXC Quadros
      A configurable and scalable RTOS architecture for convergent processing (+)

      Features:

      • Uses two real-time kernels: RTXC/ss, and single-stack, thread-based kernel, and RTXC/ms, a multi-stack task-based kernel
      • Meets the requirements of real-time, control-processing, or Digital Signal Processing (DSP) applications
      • Supported processors: ARM 7/7T, 9/9T, Motorola DSP56F800, Motorola DSP65300/600, Motorola ColdFire family, Motorola PowerPC, Motorola StarCore MSC8101, and Texas Instruments TMS320C54x, TMS320C55x [...]
  • RF Engines Limited  (3)
    • DSP Cores for FPGA
      Signal processing cores are highly optimized FPGA designs for applications with high sample rates and demanding performance requirements (+)

      Features:

      • Guaranteed bit-true models provided with each core
      • Highly optimized implementations using pipelined architectures
      • Designs tailored to specific bit width and precision requirements
    • SpectraView™ SV900
      RF Engines' SpectraView™ SV900 system is being developed to provide a complete and cost-effective solution for performing real-time spectral analysis of very wideband analog signals. The SV900 is based around the latest high performance digitisers and powerful signal processing hardware, and can be interfaced directly to a standard personal computer. The package includes Advanced Signal Display Software (ASDS), a full-featured PC application that provides the user interface to the analysis system, with a variety of mechanisms for displaying, analysing and storing both time and frequency domain data. (+)

      Features:

      • Cost-effective spectral analysis solution
      • Extremely wideband analysis capabilities
      • Minimal setup and configuration
    • Pipelined Frequency Transform
      A specially developed architecture that is optimized for the real-time signal analysis of ultra wideband signals and transforms the signals from the time domain to the frequency domain as a Fast Fourier Transform (FFT) would do (+)

      Features:

      • Also provides high-performance filtering across hundreds of channels
      • Enables a stack of digital frequency converters or a massively parallel processed pipeline FFT to be replaced with a single chip [...]
  • RTD Embedded Technologies, Inc.  (1)
    • RTD cpuModules
      RTD offers a family of PC/104 and PC/104-Plus cpuModules and controllers based on high-performance and low power Intel Celeron, AMD Geode, and Intel 486DX processors (+)

      Features:

      20982.jpg
      • Processors range from 66 Mhz to 650 MHz
      • All PC/104-Plus cpuModules support four PCI bus masters
      • BIOS selectable thermal throttling, ACPI (Advanced Configuration and Power Interface) and APIC (Advanced Programmable Interrupt Controller) are featured on Celeron processors
  • Sheldon Instruments  (1)
    • SI-C6713DSP-PMC
      Enables adding real-time signal processing capabilities (+)

      Features:

      • PCI Mezzanine Card (PMC) is a widely used industry standard for small-sized mezzanine modules
      • A high-performance DSP processor and graphical application development in LabVIEW
      • Suitable for real-time processing applications
  • SKY Computers, Inc.  (1)
    • 2U Rack Mount
      2U Rack Mount Digital Signal Processor (+)

      Features:

      • Intel based Digital Signal Processing Computing System
      • Designed for radar or imaging applications
      • Input bandwidth: 2.5 GByte per second
  • SP Devices  (1)
    • TIGER DSP
      TIGER DSP is a digital signal processing board featuring a Xilinx Virtex 6 FPGA, data memory, and various host connections. (+)

      Features:

      45623.jpg
      • FPGA: Xilinx Virtex 6 LX240T
      • Peer-to-Peer Streaming
      • Memory size: 1 GByte
  • Spectrum Digital  (8)
    • eZdsp for TMS320VC5410
      A starter kit for the TMS320VC5410 DSP (+)

      Features:

      • TMS320VC5410 Digital Signal Processor operating at 100 MHz
      • Embedded IEEE 1149.1 JTAG scan controller
      • Interface to host PC through parallel port for debug and communications
    • eZdsp for TMS320VC33
      A starter kit for the TMS320VC33 DSP (+)

      Features:

      • TMS320VC33 Digital Signal Processor operating at 60 MHz
      • Embedded IEEE 1149.1 JTAG scan controller
      • Interface to host PC through parallel port for debug and communications
    • eZdsp for TMS320VC5402
      A starter kit for the TMS320VC5402 DSP (+)

      Features:

      • TMS320VC5402 Digital Signal Processor operating at 100 MHz from Texas Instruments
      • Embedded IEEE 1149.1 JTAG scan controller
      • Interface to host PC through parallel port for debug and communications
    • EVM320C203/F206
      A 3U 6.3 x 3.93 inch evaluation module for the TI 'C203/F206 DSPs with on-chip UART (+)

      Features:

      • Texas Instruments TMS320F206 Digital Signal Processor (20 Mips) with 32K words Flash UART on-chip
      • 64K words program and 64K words data zero wait state memory
      • 32K words on board FLASH memory
    • XDS510PP MPSD
      A portable scan path emulator for MPSD processors (+)

      Features:

      • Supports TI's DSPs with the MPSD interface (C3X)
      • Compatible with XDS510 from Texas Instruments
      • Operates with parallel port on PC or laptop, no internal adapter required
    • XDS510PP
      A portable scan path emulator for MPSD processors (+)

      Features:

      • Supports Texas Instruments DSPs with the MPSD interface (C3X)
      • Compatible with XDS510 from Texas Instruments
      • Operates with parallel port on PC or laptop, no internal adapter required
    • XDS510PP JTAG
      A portable scan path emulator for JTAG processors (+)

      Features:

      • Supports TI's DSPs and Microcontrollers with JTAG interface
      • Compatible with XDS510 from Texas Instruments
      • Operates with parallel port on PC or laptop, no internal adapter required
    • XDS510PP PLUS
      A portable scan path emulator that supports Texas Instruments DSPs and Microcontrollers with a JTAG interface (+)

      Features:

      • Compatible with XDS510 from Texas Instruments
      • Operates with parallel port on PC or laptop, no internal adapter required
      • Supports 4-bit, 8-bit, and EPP transfers
  • Spectrum Signal Processing  (15 of 22)
    • Monaco/Monaco67
      A 6U VMEbus board with a VME64 master/slave interface (+)

      Features:

      • Two processors available: single, dual, or quad 1600 MIPS, 200 MHz TMS320C6201B DSPs; or single, dual, or quad 1 GFLOPS, 167 MHz MS320C6701 DSPs
      • Up to 2 Mbytes of SBSRAM and 64 Mbytes of SDRAM
      • Hurricane, a single chip PCI bridge optimized for DSP systems
    • SDR-3000 SMRDP
      An "RF to Ethernet" wideband military communications (MILCOM) rapid-prototyping and development platform (+)

      Features:

      • Fully integrated, commercial-off-the-shelf (COTS) software defined radio platform
      • A “skinny” version of Spectrum's SDR-3000 MRDP providing a single-slot modem hardware solution
      • Integrates the latest Xilinx Virtex-4 Field Programmable Gate Array (FPGA) technology with Spectrum's proven MPC7410 PowerPC and TMS320C64x( digital signal processing technology
    • TIM-SDR
      Single-channel digital radio receiver module with software demodulation libraries (+)

      Features:

      • This surveillance solution combines an A/D converter, digital down converter, TMS320C44 DSP processor, and a D/A converter on a single-wide TIM-40 module
      • Designed to work with Spectrum's LeMans VXI product [...]
    • TIM-SDR
      Single-channel digital radio receiver module with software demodulation libraries (+)

      Features:

      • This surveillance solution combines an A/D converter, digital down converter, TMS320C44 DSP processor, and a D/A converter on a single-wide TIM-40 module
      • Designed to work with Spectrum's LeMans VXI product [...]
    • Ingliston
      A quad PCI DSP system based on the 250 MHz, fixed-point 'C6202 processor (+)

      Features:

      3663.jpg
      • 2000 MIPS
      • One PMC mezzanine site
      • Two PEM Mezzanine sites
    • PEM-FPGA
      A high-performance, programmable digital interface that connects Spectrum's ‘C6000-based DSP boards to custom and standard I/O systems (+)

      Features:

      • Provides up to 100 Mbits/sec of I/O bandwidth to each ‘C6000 DSP
      • Total data throughput of 200 Mbits/sec
      • Programmed to interface to virtually any type of digital I/O devices, including digital cameras, motor controllers, and as standard and custom parallel interfaces
    • Smart Antenna Development Platform
      A Smart Antenna Development Platform that leverages upon the reconfigurability, flexibility, and modularity of Spectrum's flexComm solutions (+)

      Features:

      • Targeted at government and commercial users that require increased capacity, extended range, and signal enhancement to get the most out of their infrastructure investment.
      • Supports two to eight receive channels with a 10 MHz bandwidth and can scan the frequency range from 20 MHz to 3 GHz, sufficient for all military communications and cellular bands
      • Provides a direction finding example program that can determine the relative position of an incoming narrowband signal
    • flexComm SDR-4000 TMRDP
      Off-the-shelf platform to develop and deploy their complex tactical MILCOM applications (+)

      Features:

      • Tactical Military Communications (MILCOM) Rapid Deployment Platform (TMRDP)
      • Platform equips quick response teams with an integrated platform designed for the rapid development and deployment of tactical MILCOM applications
      • The commercial-off-the-shelf SDR-4000 TMRDP provides full "RF to Ethernet" functionality of a software defined radio (SDR) with support for the Software Communications Architecture (SCA) in a single 19" rack
    • Mosport-VME
      An octal VMEbus processing engine (+)

      Features:

      • Eight 250/300 MHz ‘C6203 fixed-point processors
      • Peak performance of 16,000/19,200 MIPS
      • Solano-based architectures provides 200 Mbytes/sec full-duplex links between processors
    • PMC-2MAI Dual A/D Converter PMC Module
      Two 12-bit 65 MSPS A/D converters (+)

      Features:

      • Digital step attenuator allowing input levels from -9 to +6 dBm
      • Digital signal level monitor
      • External input/output clock source
    • Barcelona-HS
      A 6U, hot-swap CompactPCI board combining DSP multiprocessor hardware and software tools for designing high availability systems (+)

      Features:

      11843.jpg
      • Fixed-point or floating-point DSP signal processing engine
      • Ultra-high bandwidth mezzanine interfaces directly to DSP
      • Compliant with PICMG 2.1 R2.0
    • HCDR-1020
      A high-channel-density receiver system (+)

      Features:

      • High-speed communications fabric based on the Solano Communications IC
      • Two high dynamic range 14-bit, 65 or 80 Msamples/sec analog-to-digital converters
      • Eight Graychip GC4016 devices in a double-width ePMC form factor support 32 narrowband or 8 wideband digital down conversions per VME slot
    • HCDR-1002
      A PowerPC-based high-channel-density receiver with FPGA-based channelization (+)

      Features:

      • Processes up to 26 MHz at 65 Msamples/sec
      • High-speed communications fabric based on the Solano Communications IC
      • Two 14-bit, 65 or 80 Msamples/sec analog-to-digital converters from Xilinx Virtex-E series FPGAs for channelization functions
    • LeMans - Octal TMS320C4x VXIbus Master Board
      The LeMans 840 MFLOP octal TMS320C4x VXIbus master board can host up to six single-wide or four double-wide 'C40/44 DSP modules and TIM-40 form factor SRAM, DRAM, EDRAM, or I/O modules (+)

      Features:

      • Supports VXI shared memory, VXI master/slave modes, and 80 Mbytes/sec data transfers via the HP local bus
      • Features JTAG input and output connectors, a test bus controller, and device driver support via VISA or SICL [...]
    • ePMC-8310
      A Texas Instruments TMS320C6416/C6415 DSP-based multiprocessing engine for communications applications (+)

      Features:

      16749.jpg
      • Choice of one or two 600 MHz TMS320C6416 or TMS320C6415 fixed-point DSP processors with a peak performance of 4800 MIPS per processor
      • Integrated Viterbi and Turbo co-processors
      • Eight dedicated high-speed data paths to the DSPs, connected through a programmable router for dataflow reconfigurability
  • Sundance Multiprocessor Technology Ltd.  (5)
    • SMT363-XC2
      An expansion module that connects high-speed digital signal processors (DSPs) to the Internet (+)

      Features:

      17132.jpg
      • Allows a sophisticated collection of DSPs to connect to Ethernet/Internet directly and without involvement of a host computer
      • Uses Texas Instruments' 225-MHz TMS320C6713 DSP, based on TI's high-performance, advanced VelociTI VLIW architecture
      • NetSilicon Net-50 ARM CPU
    • SMT378
      Direct connection to C6000 DSP systems (+)

      Features:

      • High accuracy signal source through stringent design criteria communications, base stations and 'Zero-IF' subsystems
      • Wireless local loop (WLL)
      • Local Multipoint Distribution Service (LMDS)
    • SMT8090
      A development platform for the wireless and telecommunication markets (+)

      Features:

      18580.jpg
      • Two daughtercards (SMT338-VP and SMT390) are sandwiched together on a PCI carrier board
      • Two floating-point Ti TMS320C6713 processors at 225 MHz
      • Xilinx Virtex-II Pro (2VP30) FPGA with two IBM 400-MHz PowerPC processors and eight 3.125-Gbps, full-duplex serial links
    • SMT373
      A TIM module that converts the 16-bit-wide data stream from a Sundance Digital Bus into a low voltage differential signal (LVDS) (+)

      Features:

      6863.jpg
      • The maximum sample speed of 100 MHz can be reduced to achieve distances up to 20 meters
      • Can also be used as an LVDS signal interface for digital cameras, scanners, and instruments [...]
    • SMT3310
      A CompactPCI front-end radio with two module sites (+)

      Features:

      • Sundance Digital Bus (SDB) backplane on J3
      • Digital aand soft radio data input
      • Real-time data processing
  • Synopsys, Inc.  (1)
    • SPW Hardware Design System (HDS)
      Fastest path from innovation into implementation for digital signal processing systems, applying a model-based design approach (+)

      Features:

      46490.jpg
      • At its core is the C Data Flow (CDF) modeling paradigm, which enables the most efficient description of digital signal processing systems which may be implemented in dedicated digital hardware or embedded software
      • SPW Hardware Design System (HDS) is a key component in the SPW product family
      • It accelerates the hardware design, verification, and analysis of complex, algorithm intensive Digital Signal Processing (DSP) systems
  • Texas Instruments  (4)
    • DaVinci Technology
      TMS320DM646x digital media processors are DSP-based multicore SoCs specifically tuned for real-time, multi-format, HD video transcoding (+)

      Features:

      • TMS320DM355 digital media processor consists of an integrated video processing subsystem, an MPEG-4/JPEG co-processor, plus an ARM core
      • TMS320DM644x digital media processors are highly-integrated SoCs based on an ARM926 core and the TMS320C64x+ DSP core
      • TMS320DM643x digital media processors, based on the C64x+ DSP core are ideal for cost-sensitive digital media applications
    • Texas Instruments Family of Products
      Digital media processors (+)

      Features:

      • TMS320DM646x is a multicore SoC consisting of DSP+ARM9 core specifically tuned for real-time, multi-format, HD video transcoding at 10x the performance and 1/10th the price
      • TMS320DM644x consists of the fully-programmable TMS320C64x+ DSP core and a scalable, programmable ARM926-based SoCs, plus accelerators and peripherals optimized for digital video end equipment
      • TMS320DM643x is based on the C64x+ DSP core and features video, memory, and network interfaces suitable for networked video, vision applications, and other cost-sensitive digital media applications
    • C6EZFlo
      Graphical software development tool (+)

      Features:

      46273.jpg
      • Generates heavily commented and cleanly structured C code
      • Compatible with TI's C6000 DSP devices and Da Vinci video processors in DSP-based varieties
      • Ideal for fast prototyping of test and measurement applications, industrial monitoring and imaging
    • 12-bit ADS7924
      12-bit ADS7924 successive approximation (SAR) analog-to-digital converter (ADC) (+)

      Features:

      • Through intelligent system power management features, the 2.2-V ADS7924 works with any low-power system requiring sensor monitoring to potentially lower power across the system by more than 50 percent
      • Once programmed through its I2C interface, the device can operate independently, periodically waking itself to scan all four ADC channels while using only 5 uW
      • This frees the MCU to process other activities or power down entirely to yield significant power savings in energy harvesting, medical, communications, remote sensor signal monitoring, and portable applications
  • Texas Instruments, Inc.  (6)
    • DM64x
      A series of digital media processors (+)

      Features:

      • Available as the DM642, the 500 and 600 MHz versions of the DM641, and the 400 MHz DM640
      • Processors are for use in a range of video-client type applications such as IP-based video recorders, set-top boxes, security surveillance, and network cameras
      • Built on the architecture of the TMS320C64x generation of DSPs
    • TMS320C6711x
      Floating-point Digital Signal Processors (DSPs) (+)

      Features:

      • Advanced Very Long Instruction Word (VLIW) C67x DSP core
      • L1/L2 memory architecture
      • Enhanced Direct Memory Access (EDMA) controller with 16 independent channels
    • TMS320C66x multicore DSP
      Texas Instruments Incorporated is offering developers the industry’s highest performing, scalable and flexible multicore solutions based on its TMS320C66x digital signal processor (DSP) generation. (+)

      Features:

      • Fixed- and floating-point capabilities
      • Highly suited for audio infrastructure products as well as vibration and acoustic analyzers
      • Excellent fit for high precision motion control and high channel count real-time process control system
    • StarterWare
      Free software enables quick and simple programming of TI embedded processors (+)

      Features:

      185644478184183131.jpg
      • user-friendly, production-ready software for Sitaraâ„¢ 32-bit ARM® microprocessor (MPU), C6000â„¢ digital signal processor (DSP) and DSP + ARM developers
      • provides application developers with a flexible starting point that does not require the use of an operating system
      • allows for easy migration to other TI embedded devices
    • TMS320DM64x
      DSP-based digital media processors (+)

      Features:

      • Fully programmable
      • 720 MHz media processors enable HD video streams in Microsoft Windows Media 9 Series format at 720p resolution, as well as MPEG-4, MPEG-2, and MPEG-1
      • Code compatible processors
    • TMS320DM6467 DaVinci
      Wrapped with a complete offering of development tools and digital media software (+)

      Features:

      • DSP-based System-on-Chip specifically tuned for real-time, multiformat, HD video transcoding
      • Integrating an ARM926EJ-S core and 600 MHz C64x+ DSP core along with an HD video coprocessor, conversion engine, and targeted video port interfaces, the system solution delivers a 10x performance improvement over previous generation processors to perform simultaneous, multiformat HD encoding, decoding, and transcoding up to H.264 HP@L4 (1080p 30 fps, 1080i 60 fps, 720p 60 fps) [...]
  • The MathWorks, Inc.  (2)
    • Signal Processing Toolbox
      A collection of MATLAB functions that provides a rich, customizable framework for analog and digital signal processing (+)

      Features:

      • Tools for finite impulse response (FIR) and infinite impulse response (IIR) digital filter design, analysis, and implementation
      • Extensive list of filter structures
      • Widely-used transforms, including fast Fourier transform (FFT) and discrete cosine transform (DCT)
    • MATLAB Coder
      Allows designers to automatically generate portable C and C++ code directly from their MATLAB algorithms (+)

      Features:

      47785.jpg
      • The code generator supports many MATLAB language features for algorithm development, including built-in matrix math operators, dynamic array handling, plus algorithms for digital signal processing and communications
      • Incorporates MathWork's Real-Time Workshop technology and offers code generation support for rapid prototyping, real-time testing, and production embedded system implementation
      • Available immediately, and U.S. list prices start at $6,500 [...]
  • Traquair Data Systems, Inc.  (1)
    • ORS-11x
      Multi-channel analog interfaces with a user-programmable Spartan-IIE or Virtex-II FPGA, providing developers with the means to implement FPGA-based digital signal processing solutions (+)

      Features:

      31753.jpg
      • Can be used as stand-alone devices with the user-programmable FPGA responsible for supporting all signal processing functionality, or as daughtercards to micro-line DSP/FPGA boards
      • A variety of multi-channel A/D/A configurations are supported: 2-channel 14-bit A/D/A with ADC sample rates up to 65 MSps; 4-channel 16-bit A/D/A with ADC sample rates up to 2.5 MSps; 12-channel A/D/A with ADC sample rates up to 250 KSps
      • If the capabilities of a Texas Instruments TMS320C6000 DSP processor are required, an ORS-11x board can be fitted as a daughtercard to a TMS320C6000-based micro-line embedded DSP/FPGA board
  • XILINX, Inc.  (2)
    • Avnet Virtex-6 FPGA DSP Kit
      Wireless, aerospace and defense, instrumentation and medical imaging applications continue to drive demanding performance requirements for today's sophisticated electronic systems (+)

      Features:

      46504.jpg
      • Due to their inherent hardware structure advantages, Xilinx FPGAs outstrip the high-end computing power of traditional digital signal processors
      • Based on the performance leading Virtex-6 FPGAs, this DSP Kit bundles pre-validated software tools, IP and hardware into a platform that addresses even the most challenging applications
      • With the addition of targeted reference designs, the Virtex-6 FPGA DSP kit enables users to focus on creating their own unique differentiation from the very beginning of the product development process, accelerating development for experienced users while also simplifying the adoption of FPGAs for new users
    • Virtex-5 SXT platform
      Getting all the processing performance, memory and high-speed I/O is a never ending quest for applications heavy in digital signal processing (+)

      Features:

      32897.jpg
      • Integrating the flexibility of programmable logic makes building a processor even more challenging
      • The Xilinx Virtex-5 SXT platform establishes an industry record for DSP performance delivering 352 GMACs at 550MHz, while consuming 35 percent less dynamic power as compared to previous 90nm generation devices, and is the first DSP-optimized FPGA family to integrate serial transceivers
      • The Virtex-5 SXT platform delivers the highest ratio of DSP blocks-to-logic needed for high-performance digital signal processing applications in wireless, such as WIMAX and high-definition video, such as surveillance and broadcast
  • ZTEC Instruments, Inc.  (15 of 22)
    • ZT100PC
      A DSP processor that provides high-speed signal acquisition and processing in a PC/104 instrument (+)

      Features:

      • 80 MHz TMS320C5X DSP
      • User interface is provided through the PC/104 bus or through the RS-232/485 serial port
      • 32 general purpose digital I/O ports
    • ZT420PXI-TMT
      PXI/CompactPCI 200MSPS Digitizer / Digital Oscilloscope (+)

      Features:

      • Ability to test both pre-defined and user defined telecom masks
      • Automated scope configuration file save and detailed examples on mask definition allow straightforward creation of specialized masks
      • Onboard DSP software allows capture of up to 1024 waveforms with microsecond duration rearm times between waveforms
    • ZT500PXI
      14-Bit Arbitrary Waveform Generator (+)

      Features:

      • 2 mVpp to 7 Vpp Programmable Output Signal Range in 2 mV Steps
      • 300 MSample/s to 40 MSample/s Programmable Sample Rate
      • 200 MHz Maximum Analog Bandwidth
    • ZT4610 Family
      Family of digital storage oscilloscopes (+)

      Features:

      31667.jpg
      • Available in PCI, CompactPCI/PXI, and VXI
      • 4 GS/s real-time sampling rate with 800 MHz analog bandwidth
      • For higher acquisition rates, either equivalent-time (multi-capture reconstruction) or interpolated-time (single-capture reconstruction) mode can be used to achieve up to 200 GS/s
    • ZT200VME
      A modular intermediate frequency (IF) processor providing IF signal detection, processing, and modulation in a 6U VMEbus instrument (+)

      Features:

      • TMS320C50 DSP provides a complete set of IF measurement and processing capabilities including magnitude/phase measurements, In-phase/Quadrature (IQ) measurements, modulation analysis, signal modulation and demodulation, error detection and correction, equalization and filtering, feedback control, and adaptive beam-forming and noise cancellation
      • Three IF inputs (100- kHz to 10 MHz adjustable frequency range)
      • 80 dB input signal dynamic range
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      9289.jpg
      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZT442PXI
      2 Channels Simultaneous Acquisition (+)

      Features:

      • 1 GSample/s Single Shot
      • Flexible Range, Offset, Coupling, Impedance, Sampling Rate, & Analog Filtering
      • 300 MHz Analog Bandwidth
    • ZT450PXI-00 -Digital-Storage Oscilloscope
      2 (PCI, PXI) or 4 (VXI) channels (+)

      Features:

      • 8-bit resolution
      • 1 GSps to 2.5 GSps single-channel interleaved sample rates
      • 500 MHz to 1 GHz max analog bandwidth
    • ZTC400SCU
      Analog input: DC to 150 MHz bandwidth (+)

      Features:

      • Analog signal range: 1V maximum
      • 500 MSamples/sec sample rate
      • 12-bit ADC resolution
    • ZT420VXI / ZT422VXI
      8-bit digitizer/digital oscilloscope, ZT420VXI: I channel, ZT422VXI: 2 channel (+)

      Features:

      • + 0.1V to + 5V programmable input signal range
      • 200 MSamples/ sec to 10 MSample/sec programmable sample rate
      • 100 MHz analog bandwidth
    • Z1428VXI
      A full featured digital storage oscilloscope for both legacy and next generation modular instrumentation systems (+)

      Features:

      16009.jpg
      • 2 channels simultaneous, 8-bit resolution
      • 1 GSps, 250 MHz analog bandwidth
      • 1 MS record length per channel
    • ZT442 family
      A family of three complete, high performance digital storage oscilloscopes (+)

      Features:

      14829.jpg
      • Two channels simultaneous full-speed
      • 1 GSample/sec single shot
      • Flexible signal processing, range, offset, coupling, impedance, sampling rate, and analog filtering
    • ZT621VXI
      Two channels simultaneous full speed (+)

      Features:

      • 1 Gsample/sec single shot
      • signal processing, range offset, coupling, impedance, sampling rate, and analog filtering
      • 300MHz analog bandwidth
    • ZT432VXI
      2 channel (PXI) or 4 channels simultaneous (VXI), 12-bit resolution (+)

      Features:

      • 200 MS/s, 90 MHz analog bandwidth
      • Up to 4 MS record length per channel
      • Programmable range, offset, coupling, impedance, sampling rate, and analog filtering
06/27/22 05:58
Close

Subscribe to DSP updates