DSP

Showing results for: discontinuous signal
Refine DSP companies and products:
dsp digital signal processor digital signal processing dsp engine radar digital signal processing dsp software dsp hardware dsp system dsp systems radar signal processor digital signal processors discontinuous signal digital signal processin a/d d/a
Click on any vendor
to see a listing of
discontinuous signal related products.
  • 3L Ltd  (1)
    • Diamond FPGA
      Diamond FPGA builds a single application file by taking DSP and FPGA tasks and automatically combining them with all the necessary support logic (+)

      Features:

      31281.jpg
      • Loading this one file initializes every DSP and FPGA in the system and starts the final application running
      • Hardware/software codesign environment uses VHDL or high-level EDA tools
      • Provides an optimization framework for thread-based functions [...]
  • 4DSP  (5)
    • FMC645
      The FMC645 is a Digital Signal Processor FMC daughter card based on the Texas Instruments TMS320C6455 device. The FMC645 daughter card is mechanically and electrically compliant with the FMC standard (ANSI/VITA 57.1). The card has a high-pin count connector and can be used in a conduction cooled environment. The card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions and peripheral interfaces. Several Gigabit differential pairs from the FMC connector are used to implement a PCIe and Serial Rapid IO interface between the FMC and the carrier. Many other digital I/O interfaces are also made available to the FMC carrier. Because of the use of level translators between the DSP and the FMC connector the FMC645 can fully operate on any VITA 57.1 compliant carrier. A 512 MB DDR2 SDRAM on-board bank directly connects to the DSP thus providing the FMC645 with the memory resources required for demanding signal processing applications. (+)

      Features:

      212158754661410541.jpg
      • 1.2 GHz TMS320C6455 DSP
      • Fully conduction cooled compliant
      • VITA 57.1-2010 compliant
    • CES720
      The CES720 (Compact Embedded System) is a standalone, small form factor embedded system designed to provide a complete and generic processing platform for data acquisition, signal processing, and communication. The system features a low-power x86 CPU tightly coupled to a high-performance Kintex-7 and FPGA Mezzanine Card (FMC - VITA 57.1). The Kintex-7 410T FPGA provides a flexible and powerful processing backbone for interfacing to the FMC site, CPU, and external DDR3 SDRAM, with plenty of room left over for high-performance Digital Signal Processing needs. (+)

      Features:

      282556924091950899.jpg
      • System Controller - AMD G-Series Dual Core 1.0GHz Processor T40E
      • FPGA - Kintex-7 410T FFG676
      • 2GB DDR3 SDRAM
    • FC6301
      A high-performance CompactPCI card with advanced digital signal processing capabilities (+)

      Features:

      52443.jpg
      • Virtex-6 LX240T, LX365T, LX550T, SX315T, SX315T, SX475T
      • High density Memory Options using BLAST sites: DDR2 and DDR3 SDRAM, QDR2 SRAM, NAND FLASH
      • Onboard user defined 128Mbit Flash ROM
    • FM680
      The first in a series of Xilinx Virtex-6 FPGA based XMC and PMC boards (+)

      Features:

      43927.jpg
      • Unique design and manufacturing technique provides advanced configurability called Board Level Advanced Scalable Technology (BLAST)
      • BLAST accelerates the manufacturing process for customer-specific configurations that normally delay the production cycle and add to production cost
      • Xilinx Virtex-6 provides more usable FPGA resources at substantially reduced power consumption and, therefore, generated heat
    • Wideband DDC
      A Digital Down Converter performs channel access functions in digital receivers (+)

      Features:

      43474.jpg
      • It is used for extracting a channel (frequency band) of interest in a wideband signal
      • This core can be used for the following family devices: Xilinx Virtex II Pro; Virtex-4; Virtex-5; Spartan-3; Altera Stratix; Stratix II; Cyclone II, Cyclone III [...]
  • AcQ InduCom  (6)
    • VME383
      A DSP DAC for high-speed analog signal regeneration and digital signal processing (+)

      Features:

      • 6U VMEbus board
      • Four TMS320C32 floating point DSPs running at 60 MHz, delivering 30 MIPS
      • Three high-speed 16-bit D/A channels per DSP
    • CPCI381
      A 3U CompactPCI board providing a powerful platform for high-speed analog signal capturing and digital signal processing (+)

      Features:

      11141.jpg
      • TMS320C32 floating point DSP, running at 60 MHz, delivering 30 MIPS
      • Two simultaneous sampling 12-bit A/D channels
      • Programmable sampling rate up to 7.5 Msamples/sec
    • VME381
      A DSP ADC for high-speed analog signal capturing and digital signal processing (+)

      Features:

      • 6U VMEbus board
      • Four TMS320C32 DSPs, each with 2 analog input channels, running at 60 MHz, delivering 30 MIPS
      • Two simultaneous sampling 12-bit A/D channels per DSP
    • M383 DSP M-module
      Provides a powerful platform for high-speed analog signal (re) generation and digital signal processing (+)

      Features:

      • Three analog output channels share the 10 MSps output update rate
      • Local software allows enhanced and user-specific signal processing
      • Eight general-purpose digital I/Os (4x input, 4x output, TTL-compatible) are available [...]
    • M381 DSP M-module
      Provides a powerful platform for high-speed analog signal capturing and digital signal processing (+)

      Features:

      • Two analog input channels are capable of simultaneously sampling at (maximum) 7.5 MSps sampling rate
      • Local software allows enhanced and user-specific signal processing
      • Gain and offset errors are compensated by the DSP
    • CPCI383
      A 3U CompactPCI board providing a powerful platform for high-speed analog signal (re)generation and digital signal processing (+)

      Features:

      11143.jpg
      • TMS320C32 floating point DSP, running at 60 MHz, delivering 30 MIPS
      • Three high-speed, 16-bit D/A channels
      • Analog output rate is software programmable up to 7.5 Msamples/sec (using DMA, single channel)
  • Aeroflex Laboratories, Inc.  (3)
    • BSA/BSG Families
      Broadband Signal and Environment Generator (BSG) and Broadband Signal Analyzer and Recorder (BSA) families (+)

      Features:

      19013.jpg
      • The BSG combines very high speed signal memory with depths up to 16 GB, high-performance D/A converters with sampling rates up to 1,300 MHz, and broadband RF up-converters
      • The BSA family combines broadband RF down-converters, wide-bandwidth high dynamic range A/D converters with sample rates to 1,500 MHz, and up to 16 GB of high-speed memory to record and analyze complex broadband signals and environments using DSP-based signal analysis software [...]
    • 3000 RF Modules
      RF Digitizers provide precision conversion of RF signals up to 6 GHz into digital sample data (+)

      Features:

      33857.jpg
      • Used with PXI Studio application software, provide class leading high Vector Signal Analysis of RF signals
      • A series of complimentary Digital RF signal generator modules provide complex modulated baseband and RF signals up to 6 GHz
      • The Aeroflex PXI studio application software provides a framework for vector signal analysis and generation within a single integrated user interface with a C API [...]
    • IQCreator™
      Designed for use with Aeroflex's digital RF signal generators, including the 3410 and PXI-based 3000 series, IQCreatorTM enables you to create waveform files that emulate digita (+)

      Features:

      • WiMAX
      • Generic Modulation
      • TDMA Digital Standards
  • Analog Devices, Inc.  (1)
    • ADSP-218xM
      A family of six single-chip microcomputers optimized for digital signal processing applications (+)

      Features:

      • Pin-compatible and differentiated solely by the amount of on-chip SRAM
      • 2 Mbits SRAM
      • 80 MHz/MIPS
  • CommAgility  (1)
    • AMC-D1F1-1200
      An AdvancedMC module that offers a compact, high-performance DSP/FPGA signal processing solution for AdvancedTCA and MicroTCA systems (+)

      Features:

      36707.jpg
      • Texas Instruments TMS320C6455 digital signal processor running at 1.2 GHz and a Virtex-4 FX100 FPGA from Xilinx
      • Optimized for applications requiring high-end signal I/O bandwidth in a compact mid-height AMC form factor, such as wireless baseband, image processing, defense, and aerospace
      • Provides a combination of DSP and FPGA resources, with fast and flexible links to external data and over 256 MB of onboard memory
  • Compel Electronics  (2)
    • Coaxial adapters for monitoring points
      For the direct type, the device is made up of three coaxial interfaces so that an input / output path for the signal in transit and a direct link for monitoring are created (+)

      Features:

      30429.jpg
      • For the uncoupled type, the device is also made up of three coaxial interfaces; the difference lies in the fact that the signal which is picked up to be monitored is uncoupled with respect to the signal in transit through the insertion of an internal resistor which has been appropriately connected
      • Sometimes there is also the need for better adaptation, from an electrical point of view, of the output port of the signal being monitored; in this case a further resistor is appropriately connected, thus obtaining an uncoupled and adapted link
      • As far as the interface coaxial connectors are concerned, the most common types used are the 1.0/2.3 and 1.6/5.6 (male or female)
    • BALUNS
      Impedance adapters allow systems with different impedance levels to be connected (+)

      Features:

      30182.jpg
      • As is well known, the best method for transmitting a signal is to transport it using means with uniform impedance: Any variation or discontinuity leads to great reflections and losses in the signal
      • In modern equipment the need often arises to connect systems with a 75 ohm output (typical in the use of coaxial cables) with systems with a 120 ohm output (typical when using twisted pairs which have been introduced because a high density of connections with cables of reduced dimensions is needed)
      • It becomes necessary, therefore, to adopt a device capable of connecting the two systems in such a way that each uses its own impedance, eliminating the possibility of having substantial losses in the signal
  • Curtiss-Wright  (6)
    • CHAMP-AV8
      Rugged, high performance OpenVPX DSP (digital signal processing) engine based on Intel next-generation quad-core processor technology (+)

      Features:

      46882.jpg
      • High-performance floating-point processing for digital signal processing
      • (DSP) and general purpose applications
      • 6U OpenVPX-compliant
    • VPX3-453 3U VPX Virtex-6/8640D DSP
      The VPX3-453 is a high performance, small form factor DSP engine that combines a Xilinx® Virtex®-6 FPGA and a Freescale® Power Architecture MPC8640D processor. This small form-factor 3U VPX (VITA 46/48) card is ideal for SWaP-constrained environments and is designed to support the full -40 + 85 deg C rugged operating temperature range. The VPX3-453 speeds and simplifies the integration of advanced DSP and image processing into embedded systems designed for demanding Radar Processing, Signal Intelligence, ISR, Image Processing, and Electronic Warfare applications. (+)

      Features:

      217438257121131374.jpg
      • One user-programmable Xilinx Virtex-6 FPGA node (LX240T)
      • One Dual-core Freescale Power Architecture MPC8640 processor
      • On-board Gen2 PCIe switch
    • FPE650 FPGA VPX
      A quad FPGA processor card which combines high bandwidth I/O, achieved through VPX/VPX-REDI and FMC/VITA 57 sites (+)

      Features:

      36805.jpg
      • Designed for the most demanding digital signal processing applications such as electronic counter measures, signal intelligence, and electro-optics
      • Four Xilinx LXT, SXT, or FXT Virtex-5 FPGAs
      • 4x Xilinx Virtex-5 FPGAs (SX95T, LX155T, FX100T)
    • CHAMP-WB 6U OpenVPX Virtex-7 FPGA Card
      The Curtiss-Wright CHAMP-WB is a user-programmable Xilinx Virtex-7 FPGA-based computing product designed to meet the needs of challenging embedded high-performance digital signal and image processing applications. The CHAMP-WB is targeted specifically at wide-band, low latency applications that require large FPGA processing, wide input/output requirements, with minimal latency. (+)

      Features:

      226605770407897699.jpg
      • OpenVPX (VITA 65) profile MOD6-PAY-4F1Q2U2T-12.2.1-11, VPX REDI (VITA 48 option)
      • Digital Signal Processor with Single user-programmable Xilinx Virtex-7 FPGAs (X690T or X980T)
      • 8 GB DDR3L SDRAM in two banks
    • CHAMP-FX4 6U OpenVPX Virtex-7
      The CHAMP-FX4 is the flagship 6U product in Curtiss-Wright Defense Solutions’ family of user programmable Xilinx® Virtex®-7 FPGA-based computing products, designed to meet the needs of challenging embedded high performance digital signal and image processing applications. Curtiss Wright’s 4th generation 6U FPGA card, the CHAMP FX4 combines the dense processing resources of three large Xilinx Virtex-7 FPGAs with over 12 GB of memory resources, all on a rugged 6U OpenVPX (VITA 65) form factor module. (+)

      Features:

      292163107861464693.jpg
      • Over 100 GB/s of backplane I/O bandwidth
      • Gen2 Serial RapidIO (SRIO) provides standards-based connectivity to general-purpose processing boards such as the VPX6-1957 and CHAMP-AV8
      • Two FMC interfaces with 80 differential signal pairs
    • RVP Tracker
      A radar tracking system that supports moving platforms, including ship and airborne (+)

      Features:

      17474.jpg
      • Provides an integrated capability for automatic target tracking from primary radar video
      • Can be interfaced with a variety of radar types, including ACP/AARP, RADDS, ASDE-3, and specialized serial and parallel formats
      • Incorporates clutter-processing algorithms that provide enhanced signal quality for the plot extraction and tracking
  • Fujitsu  (1)
    • FCN-260D
      A vertical board-mount I/O socket in the microGiGaCN connector series (+)

      Features:

      18253.jpg
      • Optimized for differential signal transmission of 3.125 Gbps and higher, over standard FR-4 material
      • Available in 4x and 12x versions with latches for InfiniBand applications
      • Intermatable with the series' existing cable-mount plug connectors
  • GE Intelligent Platforms, Inc.  (15 of 21)
    • AXISLib-CL
      AXISLib-CL Signal and Vector Processing Library providing digital signal processing and mathematical functions (+)

      Features:

      • Comprehensive signal and vector processing functionality
      • Accelerates engineering development
      • Both industry standard VSIPL and proprietary AXISLib0RSPL API provided
    • AXISLib-CL
      A platform-independent linkable software Signal and Vector Processing Library (+)

      Features:

      41674.jpg
      • Software development can begin before target hardware is available · Rapid migration from modeling to embedded platform deployment
      • Designed for developers of military and aerospace applications such as radar, sonar, and SIGINT, but is also applicable to any industry – such as medical imaging – where rapid development of sophisticated digital signal- and image processing applications is a requirement
      • Works in conjunction with AXIS, GE Intelligent Platforms Advanced Multiprocessor Integrated Software development environment, designed to dramatically speed and simplify the creation and debugging of sophisticated DSP applications
    • G4DSP-XD3
      Massive signal and data processor (+)

      Features:

      36791.jpg
      • Four MPC7448 nodes at 1 GHz to 1.4 GHz
      • AccellerX PCI-X architecture
      • Up to 2 GB DDR SDRAM
    • GE Fanuc ICS-1556B
      ADC module (+)

      Features:

      42046.jpg
      • 400 MHz bandwidth
      • 14-bit ADC PMC Module
      • Designed for demanding communication applications such as software defined radio, signals intelligence (SIGINT), digital receivers, and tactical communications where the requirement is to convert analog data into digital information in as close to real-time as possible
    • Tsumani 6U CPCI Development Kit
      FPGA processor solution targeted at high performance software defined radio applications (+)

      Features:

      • Dual Stratix EP1S80 FPGAs are tightly coupled to provide a power platform for signal processing
      • Two PMC module sites provide I/O connectivity to either front panel or back panel connections
      • A direct high bandwidth 1 GBps path from the PMC P4 connector directly to the FPGAs
    • AXISLib-RSPL
      Performance Optimized Signal Processing Library (+)

      Features:

      • Optimized for GE Intelligent Platforms PowerPC/AltiVec enabled platforms
      • Standalone or integrated within the AXIS software environment
      • Comprehensive signal and vector processing functionality
    • ICS-8554D
      For use in communications, radar, and test and measurement applications in harsh environments (+)

      Features:

      33318.jpg
      • Suitable applications include military communications, signal intelligence, smart antenna, radar beam forming, wireless test and measurement and satellite ground stations
      • DC-coupled digital receiver
      • Four 14-bit ADCs that sample synchronously at frequencies up to 105 MHz
    • AXISLib-VSIPL
      Performance optimized vector signal image processing library (+)

      Features:

      • Optimized for GE Intelligent Platforms PowerPC/AltiVec enabled platforms
      • Standalone or integrated within the AXIS software environment
      • Comprehensive vector, signal and image processing functionality with 512+ functions supported
    • ICS-1554
      4-channel, 160 MHz 16-bit ADC PMC module with Virtex-5 SX95 user programmable FPGA (+)

      Features:

      • Four AC-coupled analog inputs
      • FS < 160 MHz per channel
      • Xilinx Virtex-5 SX95 User Programmable FPGA
    • ICS-1554
      4-channel, 160 MHz 16-Bit ADC PMC module with Virtex-5 SX95T user programmable FPGA (+)

      Features:

      36712.jpg
      • Four AC-coupled analog inputs
      • Fs ≤ 160 MHz per channel
      • Xilinx Virtex-5 SX95T User Programmable FPGA
    • ICS-1556
      4-channel, 400 MHz 14-bit ADC PMC module with Virtex-5 SX95T user programmable FPGA (+)

      Features:

      • 4 transformer-coupled analog inputs
      • Analog-to-digital resolution 14-bits
      • Fs≤ 400 MHz per channel
    • ICS-8145
      Rugged high-speed Acoustic VME Bus ADC board (+)

      Features:

      33572.jpg
      • 16 ADC channels (Analog Devices AD9260): 16-bits @ 2.5 MSPS
      • Rear I/O features differential analog inputs and FPDP II output bus
      • Onboard signal conditioning provides programmable gain, filtering
    • TS-PMC A30
      FPGA processor solution targeted at high performance military and commercial computing applications (+)

      Features:

      20869.jpg
      • Stratix FPGA and high bandwidth capability PCI Mezzanine Card
      • Ideal for video and image processing, software defined radio, radar, sonar as well as other high performance signal processing applications
      • Flexibility of front or rear panel connections [...]
    • AXISView
      Multiprocessor productivity tools, integrating system development and debug environments (+)

      Features:

      • Intuitive, easy to use graphical tools providing visualization of multiprocessor systems
      • Fully integrated tools minimizing time from development to deployment
      • Maximizes performance through interactive monitoring
    • ICS-8551
      The ICS-8551 is a rugged 4 or 2 channel, 1.5/3 GHz ADC XMC module intended for Software Defined Radio (SDR) applications (+)

      Features:

      36708.jpg
      • 4 AC-Coupled Analog Inputs
      • Fs ≤ 1.5 GHz 4-channel, or 3 GHz 2-channel (software selectable), 8-bit
      • Xilinx Virtex-4 User Programmable FPGA (FX60 or FX100)
  • Hunt Engineering  (1)
    • HERON DSP Systems
      HERON high-performance modular signal processing systems for PCI-based, USB connected, and Embedded use are programmable and reconfigurable, using common APIs to provide compatibility and complete flexibility (+)

      Features:

      33502.jpg
      • Choose one or combine any number of our off-the-shelf modules
      • Modules with Xilinx Virtex FPGA (with external memory options plus digital and analog I/O choices) and TI ‘C6000 DSP
      • Mount selected modules on a HERON module carrier which provides real-time data connections with 400 Mbps possible in each direction simultaneously
  • Innovative Integration  (13)
    • X6-250M
      The X6-250M integrates digitizing with signal processing on a PMC/XMC IO module. The module has a powerful Xilinx Virtex 6 FPGA signal processing core, and high performance PCI Express/PCI host interface. Applications include software-defined radio, RADAR receivers, and multi-channel data recorders. The X6-250M has eight simultaneously sampling A/D channels that sample at rates up to 250 MSPS (14-bit). The A/D have matched input delays and response. The A/D are supported by a programmable sample clock PLL and triggering that support multi-card synchronization for large scale systems. A Xilinx Virtex6 SX315T (LX240T and SX475T options) with 4 banks of 1GB DRAM provide a very high performance DSP core with over 2000 MACs (SX315T). The close integration of the analog IO, memory and host interface with the FPGA enables real-time signal processing at extremely high rates. FEATURES: Eight 250 MSPS, 14-bit A/D channels 1.5Vp-p, AC-Coupled, 50 ohm, SSMC inputs Xilinx Virtex6 SX315T/SX475T or LX240T 4 Banks of 1GB DRAM (4 GB total) Ultra-low jitter programmable clock Gen2 x8 PCI Express option providing 2 GB/s sustained transfer rates PCI 32-bit, 66 MHz with P4 to Host card PMC/XMC Module (75x150 mm) 18-22W typical Conduction Cooling per VITA 20 Ruggedization Levels for Wide Temperature Operation Adapters for VPX, Compact PCI, desktop PCI and cabled PCI Express systems [...] (+)

      Features:

    • Quixote 64-bit 6U
      A 64-bit CompactPCI 6U board for advanced signal capture, generation, and co-processing (+)

      Features:

      • 1 GHz TMS320C6416 DSP and 2 to 6 MGATE Virtex-II FPGA
      • 32 MB SDRAM, 8 MB ZBT SBSRAM and AD6645 and AD9764 converters
      • 64/32 bit CompactPCI, 66 MHz, 5 V/3.3 V and complex trigger modes with HW event logging
    • Quixote Complete SDR Solution
      1 GHz TMS320C6416 DSP (+)

      Features:

      22229.jpg
      • 2 to 6 MGATE Virtex-II FPGA
      • 32 MB SDRAM, 8 MB ZBT SBSRAM
      • AD6645 and AD9764 converters
    • X6-400M PMC/XMC Module
      Integrates high speed digitizing and signal generation with signal processing on a PMC/XMC I/O module with a powerful Xilinx Virtex-6 FPGA signal processing core, and high performance PCI Express/PCI host interface (+)

      Features:

      46507.jpg
      • The X6-400M features two 14-bit 400 MSPS A/Ds, either AC or DC-coupled, plus two 500 MSPS update rate DACs
      • The DAC can be used a single 1 GHz output channel
      • Receiver IF frequencies of up to 250 MHz are supported
    • X6-1000M
      Integrates high-speed digitizing and signal generation with signal processing on a PMC/XMC IO module for demanding DSP applications. (+)

      Features:

      • Two 1 GSPS, 12-bit A/D channels
      • Two 1 GSPS, 16-bit DAC channels
      • +/- 1V, AC or DC -Coupled, 50 ohm, SMA inputs and outputs
    • X3-DIO
      64 single-end/32 differential digital I/O (+)

      Features:

      • 100 MHz signal rates to FPGA using LVDS
      • 50 MHz LVCMOS signal rates
      • 400 MB/s LVDS capture/playback to SRAM
    • Quadia
      Quad-DSP (+)

      Features:

      34737.jpg
      • Dual FPGA
      • Dual PMC sites
      • CompactPCI board with an advanced architecture that provides inter-processor connectivity and access to external interfaces
    • FMC-Servo
      Innovative Integration, a trusted supplier of signal processing and data acquisition hardware and software solutions, today announced the FMC-Servo. The FMC-SERVO module features eight simultaneously sampling A/D and DACs with a flexible, low-jitter programmable time base. (+)

      Features:

      310715844752207177.jpg
      • the ability to create high-end system solutions in which a portion of a sophisticated control algorithm is embedded in an FPGA
      • performs high-speed computations at the sample rate
      • match to modern system-onchip (SoC) solutions such as the Xilinx Zynq
    • X6-1000M
      The X6-1000M integrates high-speed digitizing and signal generation with signal processing on a PMC/XMC I/O module for demanding DSP applications (+)

      Features:

      52897.jpg
      • Two 1 GSPS, 12-bit A/D channels
      • Two 1 GSPS, 16-bit DAC channels
      • ±1V, AC or DC-Coupled, 50 ohm, SMA inputs and outputs
    • X6-1000
      X6-1000M integrates high-speed digitizing and signal generation with signal processing on a PMC/XMC IO module for demanding DSP applications. The tight coupling of the digitizing to the Virtex6 FPGA core realizes architectures for SDR, RADAR, and LIDAR front end sensor digitizing and processing. The PCI Express system interface sustains transfer rates over 2 GB/s for data recording and integration as part of a high performance realtime system. (+)

      Features:

      307375327861483711.jpg
      • Two 1 GSPS, 16-bit DAC channels and Two 1 GSPS, 12-bit A/D channels
      • +/-0.5V, AC or DC -Coupled, 50 ohm, SSMC inputs and outputs
      • Xilinx Virtex-6 SX315T/SX475T or LX240T
    • X6-250M PMC/XMC Module with 8 250PSPS
      The X6-250M integrates digitizing with signal processing on a PMC/XMC IO module. The module has a powerful Xilinx Virtex 6 FPGA signal processing core, and high performance PCI Express/PCI host interface. Applications include software-defined radio, RADAR receivers, and multi-channel data recorders. (+)

      Features:

      214503304641304979.jpg
      • Eight 250 MSPS, 14-bit A/D channels
      • +/-1V, AC-Coupled, 50 ohm, SSMC inputs
      • Xilinx Virtex6 SX315T/SX475T or LX240T
    • cToro
      150-MHz TMS320C6713 DSP (floating point) (+)

      Features:

      • 16 independent analog I/O channels to 250 Ksamples/sec
      • 64 bits digital I/O
      • CompactPCI 64/32-bit, 33-MHz, 5 V/3.3 V
    • Quadia.. Advanced Signal Capture & Realtime
      1 GHz TMS320C6416 DSP (x4) (+)

      Features:

      22230.jpg
      • 64 MB SDRAM per processor
      • Flexible internal/external communication mesh
      • 64-bit/66 MHz CompactPCI
  • Integrated Device Technology, Inc.  (1)
    • IDT PanelPort VPP11
      Fully compliant with the DisplayPort 1.1a standard for LCD TVs, projectors and high-end monitors (+)

      Features:

      • Offers original equipment manufacturers (OEMs) an increased level of digital signal integrity by significantly reducing electromagnetic interference (EMI) on all monitor or display device interfaces by utilizing IDT spread spectrum clocking technology
      • Able to achieve this level of digital signal integrity through its unique incorporation of in-house customizable serializer/deserializer (SerDes) and industry-leading IDT serial interface technologies
      • Fully compliant with the DisplayPort 1.1a standard and allows IDT customers to connect their multimedia devices to any type and size of monitor with an external DisplayPort connection, providing them with greater display options
  • MacPanel Company  (1)
    • SCOUT Next Generation Mass Interconnect
      SCOUT featuring Direct Access is an innovative pull-through mass interconnect solution specifically designed to deliver the full performance of the PXI platform. Direct Access enables system designers to limit / eliminate traditional cabling by introducing a pull-through interface adapter - called a Direct Access Kit (DAK). Through the utilization of fully enclosed PCBs or fixed-wire solutions, DAKs mitigate capacitance, signal crosstalk and other attenuation issues that plague conventional cable based ATE. The result is increased performance with a far higher degree of stability and up-time. SCOUT based systems are generally configured at a comparable initial price to cable based solutions, BUT the cost of integration and maintenance will ALWAYS be much lower. Complex PXI configurations can be integrated in a matter of hours where cable based solutions can take days or weeks. Furthermore, DAK modules meet COTS requirements, eliminating costly engineering and assembly time associated with custom cable assemblies - AND these costs savings will continue throughout the life of the system. FEATURES: Improved Signal Quality Simplified Integration Lower Cost of Test [...] (+)

      Features:

  • Mercury Systems  (10)
    • MCP3 FCN
      A rugged, conduction-cooled 3U CompactPCI digital signal processing board (+)

      Features:

      20317.jpg
      • PowerPC 7447 @ 1 GHz
      • Virtex II Pro P40 FPGA Discovery II System Controller
      • Conduction cooled with options for air-cooled lab development
    • ECV4-RFT
      A mixed-signal module with capability to coordinate data streams to and from sets of spatially distributed sensors (+)

      Features:

      • Based on COTS technology
      • Combines high-speed A/D and D/A technology, Xilinx Virtex-4 FPGA reconfigurable processors, and fiber I/O
      • Suitable for wideband applications that require a blend of powerful remote processing and low-latency data transfer
    • ECV4-4-4R1500echotek
      The Echotek Series ECV4-4 family of digital receivers implements a flexible baseboard plus mezzanine architecture while supporting extremely high density FPGA-processing power (+)

      Features:

      34734.jpg
      • Optimized for composite, multi-channel data processing in beamforming and direction-finding
      • Well suited to COMINT, telecommunications, and radar applications
      • High-speed A/D conversion
    • Echotek Series ECV4-2
      The ECV4-2, with input clock capability up to 1.5 GHz, is the highest performing digital receiver in an XMC form factor in the industry (+)

      Features:

      • Echotek Series products lead the mixed-signal industry in extracting clear signals from electronic clutter, forming a bridge between the realms of analog signals and digital processing. After an analog signal is received by an antennae or other sensor, it must be digitized and manipulated into a form amenable to signal processing. The challenge, and the key to successful applications, is to manage this transformation in real time while maintaining the integrity of the original signal
      • Processing power is delivered by a Xilinx Virtex-4 FPGA (field-programmable gate array). This FPGA allows users to run customized algorithms such as digital down/up conversion (wideband or narrowband), Fast Fourier Transforms (FFTs), and filtering directly on the ECV4-2. Modules are available in air-cooled or conduction-cooled versions [...]
    • Echotek ECV4-2
      A family of mixed-signal PMC and XMC modules that serve as high-performance digital receivers for the mixed-signal industry (+)

      Features:

      • Two Virtex-4 FPGAs for data processing and PCI/PCI-X interfacing
      • PMC/PCI form factor
      • Preloaded FPGA development IP
    • VSIPL-Lite
      A commercial implementation of the Vector Image and Signal Processing Library (VSIPL) standard (+)

      Features:

      • Enhances application portability between platforms by providing a consistent application programming interface and a common set of mathematical functions on all supporting platforms
      • Library functions include: 1) support functions such as creation and manipulation of data blocks and views, 2) scalar operations such as retrieving the imaginary part of a complex number, 3) vector element-wise operations such as arithmetic and trigonometric operations, and 4) signal processing functions including FFTs, FIRs, and histograms [...]
    • Ensemble GSC6200
      The EnsembleTM 6000 series 6U OpenVPXTM GSC6200 GPU Processing Module from Mercury Computer Systems, Inc. harnesses the tre- mendous compute power of graphics processing units (GPUs) for rugged, high-performance, embedded signal and image processing in a broad range of defense and commercial applications, including radar signal processing, electro-optical and infrared image processing, electronic warfare and other applications requiring intense computational capabilities on large streams of data (+)

      Features:

      52886.jpg
      • Dual MXM sites support 1 NVIDIA GeForce GTX 460M Fermi Architecture GPU, each with two single-link DVI interfaces
      • 48-lane, 12-port PCI Express Gen2 switch to backplane
      • Software-controlled management features
    • SAL (Scientific Algorithm Library)
      Scientific algorithm libraries with more than 400 algorithms required for image and signal processing applications such as medical imaging, radar, sonar, signals intelligence, and seismic processing (+)

      Features:

      • Most SAL functions are hand-coded in assembly language (less frequently used routines are implemented in C)
      • SAL application programming interface is consistent between architectures and across processor generations, eliminating the need to recode mathematical functions for different target computers
      • SAL routines can be accessed with calls from higher-level languages, improving both productivity and portability
    • SBC6521
      Designed and optimized for high-density processing, high memory bandwidth, and I/O in a single OpenVPX slot within an ISR subsystem (+)

      Features:

      45624.jpg
      • Mercury's innovative OpenVPX multi-plane architecture approach creates an extensible architecture that facilitates interoperability among the various subsystem functions
      • The expansion plane, one of the planes in the OpenVPX multi-plane architecture, provides scalable I/O and high-speed communications between the SBC6521 and the rest of the subsystem
      • Scalability and intra-system high-speed communications are crucial elements for the embedded signal and image processing applications required by all ISR subsystems; for example, as part of an ISR subsystem, the SBC6521 supports high-powered XMC mezzanine cards for electronic warfare (EW) applications such as high-speed direction finding and signal jamming
    • PowerStream 3000
      For SIGINT/COMINT deployments using standard 3U CompactPCI (+)

      Features:

      • Conduction-cooled and ruggedized
      • Sophisticated power management
      • Easy application migration using VxWorks
  • Nallatech  (2)
    • VXS-620 FPGA
      FPGA and PowerPC VXS multiprocessor (+)

      Features:

      42875.jpg
      • Designed to meet the signal processing needs of modern signal intelligence, software defined radio, and radar applications
      • The VXS-620 is the latest product to be introduced to the highly successful Nallatech REVX Series of rugged embedded processing solutions
      • The VXS-620 features an onboard Xilinx Virtex-5 FPGA for the implementation of high performance DSP applications
    • XMC-240
      FPGA processing and analog input PMC/XMC mezzanine (+)

      Features:

      42876.jpg
      • Designed to meet the signal processing needs of modern signal intelligence, software defined radio and radar applications
      • The XMC-240 is the latest product to be introduced to the highly successful Nallatech REVX Series of rugged embedded processing solutions
      • The XMC-240 features four channels of analog input that can sample analog signals at up to 250 MSPS with 14 bits resolution
  • National Semiconductor  (2)
    • LM49352 and LM49151
      The PowerWise LM49352 mixed-signal audio subsystem and LM49151 analog subsystem are targeted at smart phones, full-featured phones, portable gaming devices, and GPS devices (+)

      Features:

      41693.jpg
      • The LM49352 is a mixed-signal audio subsystem that integrates audio codec functionality with ground-referenced headphone amplifiers, earpiece driver, Class D loudspeaker and audio Digital Signal Processor (DSP) in one miniature 3.3 mm by 3.3 mm package
      • The loudspeaker delivers ultra-high efficiency (93 percent at 970 mW from a 4.2 V supply), while the headphone amplifier offers low-power (18 mW) MP3 playback to extend battery life
      • The LM49151 analog subsystem integrates an earpiece driver, Class D loudspeaker, ground-referenced headphone amplifiers and automatic level control (ALC) in an ultra-small 2.2 mm by 2.6 mm package
    • Sensor WEBENCH
      National Semiconductor's WEBENCH Sensor Designer tool enables engineers to quickly move from concept to simulation to prototyping of common sensor solutions (+)

      Features:

      • National's WEBENCH Sensor Designer tool matches the industry's leading bridge pressure sensors, photo detector sensors and thermocouple sensors with National's PowerWise energy-efficient op amps and pin- and function-compatible 8-, 10-, 12-, 14- and 16-bit ADCs
      • Each signal path solution amplifies, conditions and digitizes the sensor output to directly link to a microcontroller or digital signal processor (DSP)
      • Using the ‘Build It!' option, designers can generate solutions they can use for evaluation and prototyping
  • Neff Instrument Corporation  (1)
    • Dynamic Signal Acquisition
      Individual digital signal processors complete with transducer conditioning including programmable excitation, excitation readback, and auto-identification of channel configuration; programmable gain amplifier; built-in autocalibration; programmable filter cutoff frequency; rolloff rates greater than 290 dB per octave; ADC per channel; bandwidth to 14 KHz; channel sampling rates to 37 KHz; and aggregate throughput rate to 2 Msamples/sec (+)

      Features:

      • Digital filters guarantee phase matching [...]
  • North Atlantic Industries  (3)
    • 64DS1
      An intelligent, DSP-based VME card (+)

      Features:

      • Incorporates up to eight separate transformer isolated digital-to-synchro/resolver converters with 1.2 VA drive, extensive diagnostics, signal and reference loss detection, and optional 5VA reference supply
      • 16-bit resolution
      • 30 arc-seconds accuracy
    • 8810A
      Dual input synchro/resolver angle measurement instrument (+)

      Features:

      • Touch screen controls
      • 0.001 degrees resolution and 0.004 degrees accuracy
      • autoranging signal inputs [...]
    • 74SD1
      A PMC, DSP-based card for synchro/resolver measurement (+)

      Features:

      • Eight single-speed or four dual-speed channels with extensive diagnostics
      • 16-bit resolution
      • Requires only +5V
  • Nuvoton Technology  (1)
    • WAU8812
      Mono audio Codec for VoIP-telephone, hands-free telephony markets; provides flexibility in performance and power consumption (+)

      Features:

      38376.jpg
      • Robust, high-fidelity, 24-bit signal architecture
      • 93dB Digital-to-Analog Converter (DAC), Signal to Noise Ratio (SNR), and 91dB Analog-to-Digital Converter (ADC) SNR at audio sampling rates from 8 KHz to 48 KHz
      • Industry-leading 6uA standby current, which greatly reduces power consumption and extends battery life in hand-held applications
  • Pentek, Inc.  (13)
    • RTR 2727
      the Model RTR 2727 rugged portable recorder suitable for military and aerospace applications. The system features recording and playback of IF signals up to 700 MHz with signal bandwidths to 200 MHz. It can be configured with 500 MHz 12-bit A/Ds or 400 MHz 14-bit A/Ds and an 800 MHz 16-bit D/A. Pentek’s SystemFlow software allows turnkey operation through a graphical user interface (GUI), while the SystemFlow application programming interface (API) allows easy integration of the recording software into custom applications. (+)

      Features:

      223484716525535130.jpg
      • Designed to operate under conditions of shock and vibration
      • Portable system measuring 16.9" W x 9.5" D x 13.4" H
      • Lightweight: approximately 30 pounds
    • Cobalt 78621
      A data acquisition module for high-performance applications and part of Pentek Inc.'s Cobalt family (+)

      Features:

      • Utilizes Xilinx's Virtex®-6 FPGA family for onboard signal processing
      • Available in both XMC and PCIe formats to satisfy a range of system needs
      • Includes ruggedized XMC-format modules with extended temperature range options for deployed applications such as an unmanned aerial vehicle (UAV) collecting radar and signal intelligence data
    • SigPro 1
      Small Form Factor (SFF) acquisition system that combines OpenVPX devices from Elma Electronic, Pentek, and Concurrent Technologies (+)

      Features:

      • The multivendor platform is targeted at radar, signal processing, high-speed data acquisition, and beamforming applications
      • SigPro 1 is based on the Pentek Cobalt FPGA XMC products with a high-performance analog-to-digital front end and the 803 Series 3U VPX-REDI Corei7 Single Board Computer (SBC) from Concurrent Technologies for processing functions and a storage subsystem that is based on solid-state disk from Elma
      • The new solution uses a three-slot VPX backplane in a conduction-cooled chassis and uses sealed MIL-STD DTL 38999 connectors for I/O
    • Model 71624
      The Model 71624 dual channel, 34 signal, adaptive IF (Intermediate Frequency) relay XMC with a Virtex-6 FPGA. As an IF relay, it accepts two IF analog input channels, modifies up to 34 signals, and then delivers them to two analog IF outputs. Any signal within each IF band can be independently enabled or disabled, and changed in both frequency and amplitude as it passes through the module. The Model 71624 supports many useful functions including signal drop/add/replace, frequency shifting and hopping, amplitude equalization, and bandwidth consolidation. (+)

      Features:

      308688793538844775.jpg
      • Modifies 34 IF signals between input and output
      • Up to 80 MHz IF bandwidth
      • Two 200 MHz 16-bit A/Ds
    • Cobalt Model 71664
      The Model 71664 comes preconfigured with a suite of built-in functions for digital down conversion, data capture, synchronization, time tagging, and formatting, making them ideal turn-key interfaces for radar, communications or general data acquisition applications. IP modules for A/D acquisition, DDC, DDR3 or QDRII+ memories, programmable beamforming, controller for data clocking and synchronization, and a VRT protocol engine are all included. (+)

      Features:

      335617248561987861.jpg
      • Complete radar and software radio interface solution
      • PCIe output supports VITA 49.0 VITA Radio Transport (VRT) Standard
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
    • 6228
      Four-channel D/A and Digital Upconverter VIM-2 Module (+)

      Features:

      32550.jpg
      • Four 16-bit D/As with 500 MHz max. sampling rate
      • Two digital upconverters with 320 MHz sampling rate
      • 2x to 16x interpolation filters
    • Cobalt 71621
      Three 16-bit, 200 MHz A/Ds, three multiband DDCs (digital downconverters), two 16-bit 800 MHz D/As with DUC (digital upconverter) and interpolator (+)

      Features:

      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Three 200 MHz 16-bit A/Ds
    • 6235-401
      GateFlow dual wideband 1k FFT receiver VIM-2 module (+)

      Features:

      32551.jpg
      • Dual 12-bit 105 MHz A/Ds
      • Built-in real-time 105 MHz 1k or 4k FFT processor
      • Radar preprocessor
    • 6229
      Dual digital upconverter and D/A VIM-2 module (+)

      Features:

      3249.jpg
      • 12-bit 200 MHz D/As
      • Low-pass or band-pass output filters
      • Translates digital signals to RF or IF frequencies up to 80 MHz
    • SystemFlow for Talon Recorders
      SystemFlow is the software interface that is integrated into every Talon recorder. The software includes the graphical user interface (GUI) that is used to control the recorder with point-and-click configuration management, a client/server communication interface, NTFS file system support and an application programming interface (API) for custom user applications and control. Signal analysis tools include a virtual oscilloscope, spectrum analyzer, and spectrogram to monitor signals before, during, and after data collection. (+)

      Features:

      3697978106213499552.jpg
      • Provides Ease-of-Use Features and Capability Improvements
      • Targets Specialized Recording Modes for Mission-Critical Applications Enhances GPS Functions for Target Triangulation and Time Stamping
      • Offers Additional Data Spectrum Display Modes
    • Cobalt Model 71671
      D/A converter module for RF and IF waveform playback (+)

      Features:

      • The XMC module has a Xilinx Virtex-6 FPGA with IP that provides turnkey waveform generation for output signal bandwidths from less than 1 KHz up to 250 MHz with an extended interpolation range from 2x to 1,048,576x
      • By extending the interpolation range, the Model 71671 supports input signal bandwidths as low as 850 Hz, while still covering maximum bandwidths up to 250 MHz
      • To offer precision timing control in a multimodule design, Pentek has implemented its new µSync timing bus in the Model 71671 [...]
    • RTR 2623
      The RTR 2623 6 GHz RF SentinelTM Intelligent Signal Scanning portable, rugged recorder. The RTR 2623 combines and exploits the power of a Pentek Talon recording system with a fully integrated 6 GHz RF down converter. The Sentinel capability adds intelligent signal scanning with real-time signal monitoring and detection that is fully user configurable. . (+)

      Features:

      353733747621633852.jpg
      • Search and capture system using Pentek’s SentinelTM Intelligent Signal Scanner
      • Captures RF signals up to 6 GHz
      • Capture and scan bandwidths up to 40 MHz
    • RTS 2620
      The Talon® RTS 2620 combines the power of a Pentek Talon Recording System with those of an RF tuner and RF upconverter hardware plus Pentek’s Sentinel Intelligent Signal Scanner. The RTS 2620 provides SIGINT engineers the ability to scan the 6 GHz spectrum for signals of interest and monitor or record bandwidths up to 40 MHz wide once a signal band of interest is detected. (+)

      Features:

      343189075621936015.jpg
      • Search and capture system using Pentek’s Sentinel TM Intelligent Signal Scanner
      • Captures RF signals up to 6 GHz
      • Capture and scan bandwidths up to 40 MHz
  • Pentland Systems  (1)
    • RAD2
      Digital receiver featuring dual channel, 14-bit resolution with up to 105MSPS sampling speed (+)

      Features:

      16182.jpg
      • Up to 16 individual down-converter channels for I&Q demodulation
      • Xilinx Virtex II FPGA for digital signal processing and A/D control
      • Bi-directional high-speed FIFO buffers
  • Pickering Interfaces Ltd.  (1)
    • 41-100-001
      Frequency Counter (+)

      Features:

      • Peak Power Meter
      • Time Interval Analyzer of Pulsed RF Input
      • Continuous or Pulsed RF Input Signal
  • Quadros Systems, Inc.  (1)
    • RTXC Quadros
      A configurable and scalable RTOS architecture for convergent processing (+)

      Features:

      • Uses two real-time kernels: RTXC/ss, and single-stack, thread-based kernel, and RTXC/ms, a multi-stack task-based kernel
      • Meets the requirements of real-time, control-processing, or Digital Signal Processing (DSP) applications
      • Supported processors: ARM 7/7T, 9/9T, Motorola DSP56F800, Motorola DSP65300/600, Motorola ColdFire family, Motorola PowerPC, Motorola StarCore MSC8101, and Texas Instruments TMS320C54x, TMS320C55x [...]
  • RF Engines Limited  (2)
    • DSP Cores for FPGA
      Signal processing cores are highly optimized FPGA designs for applications with high sample rates and demanding performance requirements (+)

      Features:

      • Guaranteed bit-true models provided with each core
      • Highly optimized implementations using pipelined architectures
      • Designs tailored to specific bit width and precision requirements
    • SpectraView™ SV900
      RF Engines' SpectraView™ SV900 system is being developed to provide a complete and cost-effective solution for performing real-time spectral analysis of very wideband analog signals. The SV900 is based around the latest high performance digitisers and powerful signal processing hardware, and can be interfaced directly to a standard personal computer. The package includes Advanced Signal Display Software (ASDS), a full-featured PC application that provides the user interface to the analysis system, with a variety of mechanisms for displaying, analysing and storing both time and frequency domain data. (+)

      Features:

      • Cost-effective spectral analysis solution
      • Extremely wideband analysis capabilities
      • Minimal setup and configuration
  • SKY Computers, Inc.  (1)
    • 2U Rack Mount
      2U Rack Mount Digital Signal Processor (+)

      Features:

      • Intel based Digital Signal Processing Computing System
      • Designed for radar or imaging applications
      • Input bandwidth: 2.5 GByte per second
  • SP Devices  (1)
    • TIGER DSP
      TIGER DSP is a digital signal processing board featuring a Xilinx Virtex 6 FPGA, data memory, and various host connections. (+)

      Features:

      45623.jpg
      • FPGA: Xilinx Virtex 6 LX240T
      • Peer-to-Peer Streaming
      • Memory size: 1 GByte
  • Spectrum Signal Processing  (15 of 19)
    • Monaco/Monaco67
      A 6U VMEbus board with a VME64 master/slave interface (+)

      Features:

      • Two processors available: single, dual, or quad 1600 MIPS, 200 MHz TMS320C6201B DSPs; or single, dual, or quad 1 GFLOPS, 167 MHz MS320C6701 DSPs
      • Up to 2 Mbytes of SBSRAM and 64 Mbytes of SDRAM
      • Hurricane, a single chip PCI bridge optimized for DSP systems
    • SDR-3000 SMRDP
      An "RF to Ethernet" wideband military communications (MILCOM) rapid-prototyping and development platform (+)

      Features:

      • Fully integrated, commercial-off-the-shelf (COTS) software defined radio platform
      • A “skinny” version of Spectrum's SDR-3000 MRDP providing a single-slot modem hardware solution
      • Integrates the latest Xilinx Virtex-4 Field Programmable Gate Array (FPGA) technology with Spectrum's proven MPC7410 PowerPC and TMS320C64x( digital signal processing technology
    • Ingliston
      A quad PCI DSP system based on the 250 MHz, fixed-point 'C6202 processor (+)

      Features:

      3663.jpg
      • 2000 MIPS
      • One PMC mezzanine site
      • Two PEM Mezzanine sites
    • TIM-SDR
      Single-channel digital radio receiver module with software demodulation libraries (+)

      Features:

      • This surveillance solution combines an A/D converter, digital down converter, TMS320C44 DSP processor, and a D/A converter on a single-wide TIM-40 module
      • Designed to work with Spectrum's LeMans VXI product [...]
    • TIM-SDR
      Single-channel digital radio receiver module with software demodulation libraries (+)

      Features:

      • This surveillance solution combines an A/D converter, digital down converter, TMS320C44 DSP processor, and a D/A converter on a single-wide TIM-40 module
      • Designed to work with Spectrum's LeMans VXI product [...]
    • Smart Antenna Development Platform
      A Smart Antenna Development Platform that leverages upon the reconfigurability, flexibility, and modularity of Spectrum's flexComm solutions (+)

      Features:

      • Targeted at government and commercial users that require increased capacity, extended range, and signal enhancement to get the most out of their infrastructure investment.
      • Supports two to eight receive channels with a 10 MHz bandwidth and can scan the frequency range from 20 MHz to 3 GHz, sufficient for all military communications and cellular bands
      • Provides a direction finding example program that can determine the relative position of an incoming narrowband signal
    • flexComm SDR-4000 TMRDP
      Off-the-shelf platform to develop and deploy their complex tactical MILCOM applications (+)

      Features:

      • Tactical Military Communications (MILCOM) Rapid Deployment Platform (TMRDP)
      • Platform equips quick response teams with an integrated platform designed for the rapid development and deployment of tactical MILCOM applications
      • The commercial-off-the-shelf SDR-4000 TMRDP provides full "RF to Ethernet" functionality of a software defined radio (SDR) with support for the Software Communications Architecture (SCA) in a single 19" rack
    • PRO-4600
      A 3U CompactPCI processing engine that uses a combination of FPGA, DSP, and GPP to support black-side signal processing for software defined radio (SDR) applications (+)

      Features:

      38037.jpg
      • 3U CompactPCI form factor
      • Available in conduction-cooled and air-cooled versions
      • Rugged conduction-cooled carrier versions follow the IEEE 1101.2 specification and operate with ANSI VITA 20 compliant XMC modules
    • flexComm SDR-4000 WML
      Wireless Modem Lite (WML) (+)

      Features:

      • A lower power rugged package that supports the critical modem, link, and network layer processing functions necessary in a software defined radio
      • The Lite version reduces the power required per slot by supporting a selective feature set from Spectrum's SDR-4000 products
      • Specifically designed for tactical Military Communications (MILCOM) applications and provides black-side "IF to Ethernet" digitization and processing of complex waveforms
    • PMC-2MAI Dual A/D Converter PMC Module
      Two 12-bit 65 MSPS A/D converters (+)

      Features:

      • Digital step attenuator allowing input levels from -9 to +6 dBm
      • Digital signal level monitor
      • External input/output clock source
    • LeMans - Octal TMS320C4x VXIbus Master Board
      The LeMans 840 MFLOP octal TMS320C4x VXIbus master board can host up to six single-wide or four double-wide 'C40/44 DSP modules and TIM-40 form factor SRAM, DRAM, EDRAM, or I/O modules (+)

      Features:

      • Supports VXI shared memory, VXI master/slave modes, and 80 Mbytes/sec data transfers via the HP local bus
      • Features JTAG input and output connectors, a test bus controller, and device driver support via VISA or SICL [...]
    • Barcelona-HS
      A 6U, hot-swap CompactPCI board combining DSP multiprocessor hardware and software tools for designing high availability systems (+)

      Features:

      11843.jpg
      • Fixed-point or floating-point DSP signal processing engine
      • Ultra-high bandwidth mezzanine interfaces directly to DSP
      • Compliant with PICMG 2.1 R2.0
    • TMI-3350 4-Channel Wideband Analog I/O
      Hot swappable (+)

      Features:

      22244.jpg
      • External frequency reference input for accurate sampling frequency control and time-stamping
      • IRIG-B time code input for time stamping
      • Synchronization connector allows up to three TM1-3350 and DDCs/DUCs running on PRO-3100 boards to receive a common synchronization signal
    • PRO-2910
      A PCIe-based carrier card with dual XMC sites (+)

      Features:

      • Can be used within a PC-based system to interface to Spectrum FPGA, DSP, and I/O processing engines
      • Flexible data routing architecture, allowing numerous combinations of FPGA, DSP and GPP signal processing devices
      • Supports applications requiring high-speed, low latency, deterministic data paths
    • PMC-2MAI
      A dual 12-bit, 65-Msamples/sec, AD6640 A/D converter on a single-width PMC mezzanine (+)

      Features:

      • Samples 130 KHz to 35 MHz Intermediate Frequency (IF) signals
      • Data stream can be passed to Spectum's PEM-16DDC digital down converter
      • Designed for use with Spectrum's Monaco Quad 'C6201 and Monaco76 Quad 'C6701 VMEbus products [...]
  • Sundance Multiprocessor Technology Ltd.  (3)
    • SMT378
      Direct connection to C6000 DSP systems (+)

      Features:

      • High accuracy signal source through stringent design criteria communications, base stations and 'Zero-IF' subsystems
      • Wireless local loop (WLL)
      • Local Multipoint Distribution Service (LMDS)
    • SMT373
      A TIM module that converts the 16-bit-wide data stream from a Sundance Digital Bus into a low voltage differential signal (LVDS) (+)

      Features:

      6863.jpg
      • The maximum sample speed of 100 MHz can be reduced to achieve distances up to 20 meters
      • Can also be used as an LVDS signal interface for digital cameras, scanners, and instruments [...]
    • SMT3310
      A CompactPCI front-end radio with two module sites (+)

      Features:

      • Sundance Digital Bus (SDB) backplane on J3
      • Digital aand soft radio data input
      • Real-time data processing
  • Synopsys, Inc.  (1)
    • SPW Hardware Design System (HDS)
      Fastest path from innovation into implementation for digital signal processing systems, applying a model-based design approach (+)

      Features:

      46490.jpg
      • At its core is the C Data Flow (CDF) modeling paradigm, which enables the most efficient description of digital signal processing systems which may be implemented in dedicated digital hardware or embedded software
      • SPW Hardware Design System (HDS) is a key component in the SPW product family
      • It accelerates the hardware design, verification, and analysis of complex, algorithm intensive Digital Signal Processing (DSP) systems
  • Texas Instruments, Inc.  (1)
    • TMS320C66x multicore DSP
      Texas Instruments Incorporated is offering developers the industry’s highest performing, scalable and flexible multicore solutions based on its TMS320C66x digital signal processor (DSP) generation. (+)

      Features:

      • Fixed- and floating-point capabilities
      • Highly suited for audio infrastructure products as well as vibration and acoustic analyzers
      • Excellent fit for high precision motion control and high channel count real-time process control system
  • The MathWorks, Inc.  (2)
    • Signal Processing Toolbox
      A collection of MATLAB functions that provides a rich, customizable framework for analog and digital signal processing (+)

      Features:

      • Tools for finite impulse response (FIR) and infinite impulse response (IIR) digital filter design, analysis, and implementation
      • Extensive list of filter structures
      • Widely-used transforms, including fast Fourier transform (FFT) and discrete cosine transform (DCT)
    • Simulink 4
      Enhanced version of a block-diagram modeling environment for simulating dynamic systems, evaluating performance, and refining control, DSP, and communications system designs (+)

      Features:

      • Graphical debugger easily diagnoses and debugs modeling errors
      • Matrix signal support and matrix propagation for most Simulink blocks
      • Frame-based signal processing for faster DSP applications
  • Traquair Data Systems, Inc.  (1)
    • ORS-11x
      Multi-channel analog interfaces with a user-programmable Spartan-IIE or Virtex-II FPGA, providing developers with the means to implement FPGA-based digital signal processing solutions (+)

      Features:

      31753.jpg
      • Can be used as stand-alone devices with the user-programmable FPGA responsible for supporting all signal processing functionality, or as daughtercards to micro-line DSP/FPGA boards
      • A variety of multi-channel A/D/A configurations are supported: 2-channel 14-bit A/D/A with ADC sample rates up to 65 MSps; 4-channel 16-bit A/D/A with ADC sample rates up to 2.5 MSps; 12-channel A/D/A with ADC sample rates up to 250 KSps
      • If the capabilities of a Texas Instruments TMS320C6000 DSP processor are required, an ORS-11x board can be fitted as a daughtercard to a TMS320C6000-based micro-line embedded DSP/FPGA board
  • XILINX, Inc.  (2)
    • Virtex-5 SXT platform
      Getting all the processing performance, memory and high-speed I/O is a never ending quest for applications heavy in digital signal processing (+)

      Features:

      32897.jpg
      • Integrating the flexibility of programmable logic makes building a processor even more challenging
      • The Xilinx Virtex-5 SXT platform establishes an industry record for DSP performance delivering 352 GMACs at 550MHz, while consuming 35 percent less dynamic power as compared to previous 90nm generation devices, and is the first DSP-optimized FPGA family to integrate serial transceivers
      • The Virtex-5 SXT platform delivers the highest ratio of DSP blocks-to-logic needed for high-performance digital signal processing applications in wireless, such as WIMAX and high-definition video, such as surveillance and broadcast
    • System Design Tools
      Build highly integrated 8- to 32-bit µP/µC systems (+)

      Features:

      19224.jpg
      • Implement sophisticated signal processing designs
      • Accelerate your real-time DSP processor systems [...]
  • ZTEC Instruments, Inc.  (13)
    • ZT500PXI
      14-Bit Arbitrary Waveform Generator (+)

      Features:

      • 2 mVpp to 7 Vpp Programmable Output Signal Range in 2 mV Steps
      • 300 MSample/s to 40 MSample/s Programmable Sample Rate
      • 200 MHz Maximum Analog Bandwidth
    • ZT420PXI-TMT
      PXI/CompactPCI 200MSPS Digitizer / Digital Oscilloscope (+)

      Features:

      • Ability to test both pre-defined and user defined telecom masks
      • Automated scope configuration file save and detailed examples on mask definition allow straightforward creation of specialized masks
      • Onboard DSP software allows capture of up to 1024 waveforms with microsecond duration rearm times between waveforms
    • ZT200VME
      A modular intermediate frequency (IF) processor providing IF signal detection, processing, and modulation in a 6U VMEbus instrument (+)

      Features:

      • TMS320C50 DSP provides a complete set of IF measurement and processing capabilities including magnitude/phase measurements, In-phase/Quadrature (IQ) measurements, modulation analysis, signal modulation and demodulation, error detection and correction, equalization and filtering, feedback control, and adaptive beam-forming and noise cancellation
      • Three IF inputs (100- kHz to 10 MHz adjustable frequency range)
      • 80 dB input signal dynamic range
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZT400VXI
      A high-speed digitizer (+)

      Features:

      9289.jpg
      • DC to 150 MHz analog input bandwidth
      • ± 1V analog input signal range
      • X1, X2, X4, and X5 selectable analog input gain
    • ZT442PXI
      2 Channels Simultaneous Acquisition (+)

      Features:

      • 1 GSample/s Single Shot
      • Flexible Range, Offset, Coupling, Impedance, Sampling Rate, & Analog Filtering
      • 300 MHz Analog Bandwidth
    • ZTC400SCU
      Analog input: DC to 150 MHz bandwidth (+)

      Features:

      • Analog signal range: 1V maximum
      • 500 MSamples/sec sample rate
      • 12-bit ADC resolution
    • ZT450PXI-00 -Digital-Storage Oscilloscope
      2 (PCI, PXI) or 4 (VXI) channels (+)

      Features:

      • 8-bit resolution
      • 1 GSps to 2.5 GSps single-channel interleaved sample rates
      • 500 MHz to 1 GHz max analog bandwidth
    • ZT621VXI
      Two channels simultaneous full speed (+)

      Features:

      • 1 Gsample/sec single shot
      • signal processing, range offset, coupling, impedance, sampling rate, and analog filtering
      • 300MHz analog bandwidth
    • ZT420VXI / ZT422VXI
      8-bit digitizer/digital oscilloscope, ZT420VXI: I channel, ZT422VXI: 2 channel (+)

      Features:

      • + 0.1V to + 5V programmable input signal range
      • 200 MSamples/ sec to 10 MSample/sec programmable sample rate
      • 100 MHz analog bandwidth
    • ZT432VXI
      2 channel (PXI) or 4 channels simultaneous (VXI), 12-bit resolution (+)

      Features:

      • 200 MS/s, 90 MHz analog bandwidth
      • Up to 4 MS record length per channel
      • Programmable range, offset, coupling, impedance, sampling rate, and analog filtering
    • Z1428VXI
      A full featured digital storage oscilloscope for both legacy and next generation modular instrumentation systems (+)

      Features:

      16009.jpg
      • 2 channels simultaneous, 8-bit resolution
      • 1 GSps, 250 MHz analog bandwidth
      • 1 MS record length per channel
    • ZT442 family
      A family of three complete, high performance digital storage oscilloscopes (+)

      Features:

      14829.jpg
      • Two channels simultaneous full-speed
      • 1 GSample/sec single shot
      • Flexible signal processing, range, offset, coupling, impedance, sampling rate, and analog filtering
06/27/22 05:12
Close

Subscribe to DSP updates