// Video

TSMC at ARM Techcon 2012

TSMC talks about 10nm and the upcoming technologies that they are implementing with their customers to fabricate newer faster ARM processors for everyone.

Mentor Graphics at ARM Techcon 2012

Mentor Graphics talks about some of the latest EDA solutions that they are bringing to the market at ARM Techcon 2012.

Cadence at ARM Techcon 2012

Cadence talks about some of their latest EDA solutions at ARM Techcon 2012 including the implementation of a 14nm Cortex-M0 processor in collaboration with IBM.

GLOBALFOUNDRIES at ARM Techcon 2012

Talking about the fabrication of ARM Processors, from 28/32nm HKMG to 20nm to upcoming FinFET 14nm process technologies with Subramani Kengeri, Vice President, Technology Architecture, Office of the CTO, Paul Colestock, Director, Strategic Marketing an…

Jasper Design – ARM TechCon 2011

Kathryn Kranen, the President and CEO of Jasper Design Automation, talks to ARM about their latest collaboration with ARM on the ACE protocol.

Apache – ARM TechCon 2011

Vic Kulkami, GM & Senior VP of RTL Business Unit at Apache, discusses some of the recent Apache-ARM collaborations and what these mean to the mobile industry and designers.

GLOBALFOUNDRIES Fireside Chat at ARM Techcon 2012

Fireside chat with ARM and GLOBALFOUNDRIES at ARM Techcon 2012 in Santa Clara.

"The insatiable need for functional and feature integration on to Mobile SoCs, coupled with ever increasing performance demands has challenged the Foundries and Fabless Semiconductor companies alike. While the diminishing geometries of the process technologies have kept pace to address this challenge, the solutions for leakage power dissipation continued to fall behind threatening to thwart the advances in Mobility. The ground-breaking FinFET technology is the right low-power solution and will serve as an inflection point to further enable SoC-level integration and technological advances in this exciting era of Extreme Mobility. The panel will discuss how the next generation of FinFET technology will change the mobile revolution again."

Speakers

Dean Freeman, Research VP, Gartner Research
Bruce Kleinman, VP, Product Marketing, GLOBALFOUNDRIES
Subramani Kengeri, Vice President, Technology Architecture Office of the CTO, GLOBALFOUNDRIES
Srinivas Nori, Director. SOC Innovation, GLOBALFOUNDRIES
Dipesh Patel, Deputy General Manager of the Physical IP Division, ARM

Samsung ARM TechCon 2012 Preview featuring the Arndale Community Board

Chip Estmate.TV interviews Ashay Agrawal, Director of Marketing, System LSI, Samsung Semiconductor about the Samsung’s Arndale Community Board to be featured in the Samung booth #606 at ARM Techcon October 31- Nov 1.

ARM TechCon 2012 Day 3

Sean O’Kane, Producer/Host ChipEstimate.TV

For more information about ARM IP go to: http://www.chipestimate.com/partner.php?ARM+IP+Catalog&v=250

For more information about ChipEstimate.TV go to: http://www.chipestimate.tv or ChipEstimate.com go to: http://www.chipestimate.com

W12 236 ARM Sean O’Kane TechCon Promo Day 1 Rev 2

Gary Smith on What’s Hot At DAC 2012

Opening act at DAC 2012 – Pavilion session can’t open without Gary Smith giving you a run down on What’s Hot at DAC! Bob Gardner hosts Gary with music and fun! Yes, it can get loud …

DAC 2012 Pavilion Program Overview

Yatin Trivedi, Chair of Pavilion Panel Committee, reviews the Pavilion program at the upcoming Design Automation Conference.

Karen Bartleson on Mechanics of Creativity

Karen Bartleson reviews various activities at DAC 2012 – Marie Pistilli Award to Dr. Belle Wei, and a panel discussion on Mechanics of Creativity

Kathryn Kranen on Teens Talk Tech

Kathryn Kranen will host her favorite panel at DAC: Teens Talk Tech. Don’t miss it … in the Pavilion!

Conquering New Frontiers in Analog Design below 28nm

What are the challenges of designing and manufacturing analog and mixed-signal designs at 28nm?

Heritage Series: Interview with Jim Solomon

Industry veteran Steve Ohr will interview past Phil Kaufman Award recipient Jim Solomon at 49th DAC. June 5th. San Francisco.

Samsung features Exynos processor at ARM TechCon 2012

Sean O’Kane, Producer/Host ChipEstimate.TV interviews:

Richard Yeh, Senior Director of Marketing for Samsung’s System LSI busines

For more information about Samsung and Exynos go to: http://www.samsung.com/exynos

For more information about ChipE…

ARM®TechCon™ 2012

ARM®TechCon™ 2012 go to:

http://e.ubmelectronics.com/armtechcon/index.html

Use promo code CHIPESTIMATE.COM for your 15% discount.

For more information about ARM IP go to: http://www.chipestimate.com/partner.php?ARM+IP+Catalog&v=250

For more information about ChipEstimate.TV go to: http://www.chipestimate.tv or ChipEstimate.com go to: http://www.chipestimate.com

ARM big.LITTLE Overview and demonstration

This video provides an overview of ARM big.LITTLE technology and shows an operating demonstration, based on a Cortex-A15 and Cortex-A7 processor in a big.LITTLE configuration can provide optimum performance and reduce energy consumption.

ARM & Linaro – big.LITTLE FAQ

Have questions on ARM’s big.LITTLE processing technology? ARM’s big.LITTLE Prodcut Manager, Brian Jeff and Linaro’s CTO, David Rusling discuss live the most frequently asked questions on big.LITTLE on ARM’s very first Google+ Hangout on Air.

Below are…

Gary Smith EDA at DAC 2012

Gary Smith presents his EDA market research on Sunday, June 3, 2012 at DAC in San Francisco.

The DAC Zone 2012 – June 3-7, San Francisco California

The 49th Design Automation Conference, June 3-7. EDA tools, keynotes, tutorials and workshops. DAC is the knowledge center serving a broad community of electronic, system, and IC design professionals, providing deep collaboration and innovation.

For…

Hogan Heroes at DAC 2012 – Learning from Apple

Jim Hogan will host his annual Hogan Heroes panel at DAC 2012. What can we learn from Apple about developing SoCs and Software?

DAC, Industry Trends, and EDA Challenges – Voices of DAC 2012

Patrick Groeneveld is at the helm for the 49th Design Automation Conference. As the DAC General Chair, he talks with us about the conference highlights, where the semiconductor and EDA industries are headed, and what challenges we are facing as technol…

Synopsys EDA tools and IP at ARM TechCon 2011

Synopsys provides tools and IP for ARM chip designers for the ARM Cortex-A15, all the chip makers use their tools to design and verify the SoC.

Gary Smith EDA on the future of Chip Design

Gary Smith talks about the ARM and Electronic Design Automation (EDA) and where the industry is heading as processors keep getting more and more complicated, smaller and smaller, more and more costly to develop while prices of ARM Powered devices keep getting lower and lower. Gary Smith is the founder and Chief Analyst for Gary Smith EDA. Previously, he was the Managing Vice President and Chief Analyst of the Electronic Design Automation Service, Design & Engineering Cluster at Gartner Dataquest.

Gary Smith EDA talks about the state of the ARM industry

Gary Smith is an industry expert at http://garysmitheda.com

Cadence at ARM TechCon 2011

Cadence is one of the major EDA solutions providers. All the ARM Processor designers use their software to design the processors and all of the electronics that go inside of all smartphones, tablets, laptops and more.

Tim Kelly performs a juggling act at the Atrenta DAC booth

DAC

Arteris CEO Charlie Janac speaks about SpyGlass at the Atrenta booth at Design Automation Conference

DAC