Embedded Wireless

Refine Embedded Wireless companies and products:
embedded wireless m2m onstar lte wimax white-space near-field communications nfc wireless 802.11 wi-fi zigbee 802.15 802.15 4 module 802.15.4 airbee airbee wireless cc2420 cc2430 chipcon cc2420 compxs em2420 home automation homerf ieee 802.15 ieee 802.15 4 ieee802.15.4 long range wireless mc13191 mc13192 mesh networking module radio rf modems rf module rf modules rf receiver rf transceivers rf transmitter wireless remote control wireless sensors wpan wpans zdo zig bee zigbee-ready zigby zmd wireless sensor networks wireless sensor network
Click on any vendor
to see a listing of
Embedded Wireless related products.
  • Adaptive Network Solutions GmbH  (1)
    • @ANY900-2
      783/868/915 MHz IEEE802.15.4/ZigBee RF module with U.FL antenna connector (+)

      Features:

      44497.jpg
      • For wireless sensing and control applications in smart metering, industrial automation and more
      • U.FL antenna connector enables rapid design-in, using a different external antenna for every application
      • ISM bands: 915 MHz in the US, 868 MHz in Europe and 783 MHz in China
  • Advantech Corporation  (13)
    • EKI-6311G
      Advantech Introduces 802.11b/g Industrial Wireless Access Point (+)

      Features:

      41480.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-6311G 802.11 b/g Wireless Access Point, Client Bridge and Repeater, which offers standards-based and license-free wireless connectivity for industrial devices, equipment, and applications
      • For maximum flexibility, the EKI-6311G supports multiple operating modes
      • As an Access Point, it allows wireless devices to communication with each other and with 10/100Base-TX Ethernet wired networks
    • EGD-4100W/4110W
      The EDG-4100W and EDG-4110W are RS-232 or RS-422/485 to WLAN data gateway modules (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the EDG-4100W and EDG-4110W, serial to wireless 802.11b boards for enabling wireless networking
      • Their 54 x 59 mm compact design can fit into almost any legacy OEM serial device and connect it to the wireless Ethernet world. Virtual COMport mapping is provided by both modules for convenient communications with the host PC through an 802.11b wireless network
      • The inclusion of digital I/O is a competitive advantage over similar modules
    • EGD-4100W and EDG-4110W
      RS-232 or RS-422/485 to WLAN data gateway modules (+)

      Features:

      • Serial to wireless 802.11b boards for enabling wireless networking
      • 54 mm x 59 mm compact design can fit into almost any legacy OEM serial device and connect it to the wireless Ethernet world
      • Virtual COMport mapping is provided by both modules for convenient communications with the host PC through an 802.11b wireless network
    • EKI-6311GN
      Advantech Introduces an 802.11n Wireless Access Point for High-Speed Transmissions (+)

      Features:

      46262.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-6311GN, an IEEE 802.11n industrial wireless access point. The EKI-6311GN delivers three times the throughput rates of a normal 802.11g. It is fully backward compatible with legacy 802.11b/g frequencies. With the support of STP, WMM, and IGMP snooping protocols, the EKI-6311GN effectively improves the reliability of wireless connectivity. The EKI-6311GN can achieve data rates up to 150Mbps, which allows high-speed internet access with various data and network video surveillance transmissions. It provides 600mW high output power for long-range deployment up to 5km. Also, a Power over Ethernet injector enables a unified supply of data and power through a standard Ethernet cable. To maximize wireless network security and privacy, the EKI-6311GN incorporates 64/128/152-bit WEP data encryption, WPA, WPA2, 802.1x, which can filter external user and prevent illegal attacking. Some other EKI-6311GN features include, embedded 8dBi directional antenna with external N-type connector, wide operating temperature range (-20 ~ 70°C), and IP55 waterproof certification. [...]
    • ADAM-4570W
      A cost-effective data gateway between RS-232/422/485 and 802.11b wireless LAN interfaces (+)

      Features:

      • The ADAM-4570W is functionally transparent, efficient, and cost effective when legacy H/W and S/W must continued to be used
      • Brings the advantage of remote management and data accessibility to RS-232/422/485 devices that cannot connect to the Wireless Ethernet network
      • Supports 802.11b
    • ADAM-6000W series
      Advantech launches Wireless Ethernet I/O Modules (+)

      Features:

      • (Cincinnati, Ohio – 11/17/2005) - The Industrial Automation Group of Advantech introduces the ADAM-6000W series wireless Ethernet digital I/O modules equipped with an embedded JAVA web page for remote status and control.
      • The ADAM-6050W, ADAM-6051W, and ADAM-6060W meet many diverse applications as they are equipped with numerous features and functions known as Smart I/O. The inputs can be configured to read a frequency signal, act as a counter, latching input or normal input. The outputs can be configured as pulse outputs, delayed outputs, and standard output. The output modules have a built-in communications watchdog which allows each output channel to be set to a known state if communication is lost. The user friendly interface allows for simple changes to the embedded JAVA web page without requiring JAVA programming knowledge. The units allow eight simultaneous web clients for viewing I/O status and control, if needed.
      • The ADAM-6000W series I/O modules use a wireless Ethernet standard IEEE802.11b as it is the most popular wireless network. They support Modbus/TCP and UDP protocols. These units handle industrial power and can be din-rail or panel mounted. The I/O design is suitable for applications such as building automation, environmental monitoring, production monitoring, and facility management.
    • TREK-755
      A fanless vehicle mounted computer that comes with a VIA Eden, low-power CPU (+)

      Features:

      • Applications in: depots, warehouses, transportation, agriculture, manufacturing, ports and container yards, distribution centers, shipyards
      • The rugged die-cast aluminum enclosure replaces the fan as it helps TREK-755 dissipate heat
      • Special design without ventilation holes that makes the front panel, back cover, and sides comply with IP65/NEMA4
    • TREK-756
      The TREK-756 has a heating mechanism inside a tough, dustproof, waterproof, and fanless aluminum chassis, for dependable operation when moving between extreme environments at -30 ºC to +50 °C (-22 °F to +113 °F) (+)

      Features:

      • It has bigger and brighter screens, and we're delighted to satisfy these desires while building on the successful rock-solid RoHS design of the TREK-755
      • Sometimes hot, sometimes cold, but always reliable
      • The TREK-756 is designed for tolerance of extreme environments and enhanced reliability
    • MARS-1030 series
      Intel XScale PXA255 400 MHz processor (+)

      Features:

      33699.jpg
      • Windows CE 4.2 operating system
      • Suits retail, warehousing, logistics, and ordering service applications
      • Optional 1-D/2-D barcode scanner allows users to collect information and communicate with back-end host data servers seamlessly through 802.11b and Bluetooth
    • EKI-7659CPI
      Advantech Launches an 8+2 Gigabit Combo Port Managed PoE Ethernet Switch (+)

      Features:

      44402.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-7659CPI, an Industrial Managed PoE Ethernet Switch
      • This PoE switch not only features eight PoE ports, but also provides two Gigabit Ethernet ports, allowing high speed communications for many different industrial applications
      • Furthermore, the EKI-7659CPI supports IP-based monitoring and control, allowing users to access up to eight devices connecting through a standard web browser to check power status, shutdown, restart, and more
    • EKI-2525SPI
      Advantech Launches PoE Switch with Fiber Connectivity (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the EKI-2525SPI, a ruggedized 4-port 10/100BASE-TX Power over Ethernet (PoE) unmanaged switch with integrated 100Base-FX single-mode fiber connectivity
      • PoE, a technology which is popular with enterprise IT, is relatively new to industrial and plant-floor applications
      • It allows the transmission of both power and data to Ethernet devices over standard twisted-pair Cat5/5e/6 cables
    • PWS-8101M
      10.4" XGA TFT LCD rugged mobile computer with an Intel Core 2 Duo U7500 processor, 802.11 a/b/g WiFi, built-in Class2 V2.0 +EDR Bluetooth, Windows XP Pro and an optional 3.5G/HSDPA GPRS and SiRF III GPS (+)

      Features:

      42407.jpg
      • With its military-grade MIL-STD-810F and MIL-STD-461E certification, while meeting rugged demands such as a 3 foot drop and an extreme operating temperature range, the PWS-8101M also provides 6-sides of IP65 for superior dust and water resistance
      • The PWS-8101M is driven by a four hour continuous operation high capacity battery
      • Additionally, this device comes with a variety of ready to use accessories such as hand straps, shoulder bag, vehicle mounting bracket, VESA bracket and more
    • 7" Vehicle Mounted PC
      7" WVGA TFT LCD with adjustable brightness (+)

      Features:

      36504.jpg
      • Five programmable function keys with backlight
      • Rugged aluminum enclosure and fanless design, with extreme temperature operating capability
      • Embedded OS Support (Windows CE 5.0 or XP Embedded)
  • Airbee Wireless  (2)
    • Airbee ZMAC
      Fully ZigBee ready and complies completely with IEEE 802.15.4 specifications (+)

      Features:

      • Ready for integration with any application code enabling short-range wireless com
      • MAC (Medium Access Control) - The IEEE 802.15.4 MAC contains the protocol stack that enables peer-to-peer secure communications and performs management of peer and network connectivity with other ZigBee devices
      • Airbee-ZMAC is the foundation for wireless networking utilizing either Star or Mesh network topologies
    • Zigbee Network
      Airbee-ZNS, the ZigBee-ready protocol stack software is designed for maximum portability among various 802.15.4 radios and a host of microcontrollers (+)

      Features:

      • Physical Layer – The PHY layer bridges the rest of the stack components to the transceiver (RF) hardware, handles real-time hardware events such as interrupts, and manages the transmission and reception functions pertaining to the RF and the microcontroller as required by the upper layers. Timer and clock services, which collectively form the heart-beat of the system, are generated, managed and supplied to the entire system from the PHY layer; the PHY layer interfaces with peripheral and application devices
      • Media Access Control (MAC) layer – The MAC sublayer provides the interface between the Network Layer and the PHY layer
      • Essential features of MAC sublayer are beacon management, channel access through slotted/unslotted CSMA mechanism, and guaranteed time slots (GTS) management
  • American Portwell Technology  (3)
    • PEB-2731VLA
      Compact (3.5"), cost- effective, low power embedded system board that provides fanless operation, equipped with Celeron M 600 MHz processor (+)

      Features:

      33703.jpg
      • Intel 825GM and ICH4 chipset
      • Wireless application can be accomplished by adding Mini PCI form factor wireless adapter
      • Interface supports both LAN and audio, as well as VGA, LVDS, and DVO to fulfill common graphic needs
    • PEB-2736
      Intel Atom processor Z500 series and the Intel System Controller Hub US15W (+)

      Features:

      36882.jpg
      • One 200-pin SODIMM supports DDR2 SDRAM up to 1 GB
      • Wireless application can be accomplished via mini-card socket on optional daughter card
      • Dual independent display: SDVO and 24-bit LVDS; Multistream audio and CH5.1 supported
    • PCS-8230
      Low-power in-vehicle embedded PC infotainment system (+)

      Features:

      • Utilizing the Intel Embedded Compact Extended (ECX) form factor SBC
      • Based on the Intel Atom Z510 series processor with an Intel System Controller Hub US15W chipset, delivering an excellent performance-per-watt ratio
      • Its fanless design, low-power output, and compact size make it suitable for in-vehicle infotainment as well as Point-of-Sale (POS), medical, entry-level gaming, and digital signage applications
  • antcor  (1)
    • Ikarus OS
      Wireless AP mode (+)

      Features:

      20567.jpg
      • Wireless Client mode
      • Wireless Repeater mode
      • Wireless WDS mode
  • Atific Oy Ltd.  (1)
    • Multi-radio WSN kit
      High performance FPGA based multi-radio wireless sensor network development kit (+)

      Features:

      • Extremely flexible and fully re-configurable development kit for developing new types of communication protocols, algorihms and computation architectures for mesh networking
      • Four parallel 1 Mbps radios with up to 83 selectable frequency channels allow simultaneous data exchanges with several neighbors
      • Up to four Altera NIOS softcore processors and custom HW accelerators synthesizable on FPGA enable powerful parallel computing and radio access
  • Atmel Corporation  (3)
    • ZigBee RF4CE wireless/REB231ED-EK evaluation kits
      The ZigBee RF4CE wireless evaluation kit designed for ZigBee PRO and ZigBee RF4CE application development, and prototyping and the REB231ED-EK evaluation kit with antenna diversity support for the Atmel AT86RF231 device (+)

      Features:

      52213.jpg
      • Kits support ZigBee application profiles as well as IEEE 802.15.4 and proprietary wireless applications
      • Kits come with reference boards based on the Atmel ATmega128RFA1 and AT86RF231 wireless low-power transceivers and ZigBee-compliant software stacks ready for download at Atmel's website
      • [...]
    • AT76C902
      A second generation Voice over IP (VoIP) chip, designed for 802.11a/g wireless VoIP applications (+)

      Features:

      • The AT76C902 consists of an ARM946 processor for VoIP call control, authentication and signaling functions, and two subsystems - an ARM7and 802.11a/g Media Access Controller (MAC) that implements the 802.11a/g protocols, and a TEAK TeakDSPCore and integrated voice codec for voice processing function
      • Atmel's AT76C902 supports Wi-Fi Multimedia (WMM) and WMM Power Save modes
      • By supporting U-APSD and Scheduled APSD (S-APSD), solutions based on Atmel's AT76C902 have talk times of over six hours and stand-by times of over 220 hours on a 900 mA battery
    • AT73C203
      Standard power and battery management device for 3G wireless platforms (+)

      Features:

      17127.jpg
      • Provides an integrated solution for portable and handheld applications based on microprocessors that require smart power management functions, such as 3G phones, PDAs, palmtop computers, point-of-sale terminals, and 3G modems
      • Complete set of power supplies and interfacing systems based on Intel XScale processors
      • Three sets of step-down switching converters supply application cores, memories, and analog blocks, each with up to 1.2A
  • Beck IPC GmbH  (2)
    • WLAN Solution
      Fast and Affordable Implementation of Wireless LAN Solutions with the IPC@CHIP® from Beck (+)

      Features:

      • Pohlheim, November 7, 2006 – Ethernet has largely become well-established in the industrial environment. However, there are still many applications that cannot be implemented with Ethernet, such as mobile systems or spatially separated stations in large machine halls or in the open field.
      • In these cases Wireless LAN technology (or WLAN for short) is ideal as a replacement for Ethernet since the TCP/IP protocol used enables the transparent transition from Ethernet to Wireless LAN Ethernet without having to convert the protocols. The latest encryption and authentication protocols offer at the same time satisfactory protection against unauthorised access. Depending on the environment, Wireless LAN can be used to cover distances between 50 and 300 metres and even more by using special antennas.
      • Beck's new WL01 Wireless LAN module provides the IPC@CHIP® Controller SC123 / SC143 with a fully-fledged Wireless LAN interface and enables both Infrastructure-Mode on an existing access point as well as Adhoc-Mode between several WL01 modules. The Beck IPC module is available from November 2006.
    • IPC@CHIP WLAN
      Cost-efficient Wireless LAN solution for the Beck IPC@CHIP® (+)

      Features:

      • From November 2006 Beck IPC will be offering an industrial wireless LAN extension called WL01 for the IPC@CHIP® Controllers SC123 / SC143. This extension makes it possible to also connect to mobile and distributed automation devices easily via TCP/IP without the need for any proprietary wireless solutions.
      • The connection of the separate and space-saving 23 x 36 x 5 mm add-on module to the IPC@CHIP® is implemented serially via an SPI interface with a maximum transfer rate of 48 MHz. The module supports the latest transmission standards 802.11b and g (11 and 54 Mbit/s in the 2.4 GHz range), as well as the security standards in compliance with 802.11i (WEP and WPA), and offers two antenna terminals for optimising reception and transmission.
      • An FK61-WL01 Development Kit will be offered for users to develop their own Wireless LAN solutions inexpensively and quickly. As well as the WLAN module and an adapter board for the existing DK61 IPC@CHIP® Development Kit, it also contains all the software libraries required, the documentation and a demo implementation with web configurator. It is also possible to configure the Wireless LAN module directly from the application program via a C-API, as well as using the freely adjustable web configurator.
  • Connect One Semiconductors  (2)
    • Socket iWiFi
      a secure serial-to-Wi-Fi embedded device server that connects devices running Machine-to-Machine (M2M) applications to 802.11b/g wireless LANs and protects them from network attacks. Socket iWiFi uses Connect One's iChipSec CO711AG IP communication controller chip with encryption, security, and IP protocols to act as a firewall and Wi-Fi controller for the onboard Marvell 88W8385 Wi-Fi chipset. Socket iWiFi enables devices that use communication modules in the industry-standard SocketModem form factor to be integrated into a wireless LAN network with minimal programming (+)

      Features:

      32062.jpg
      • Socket iWiFi frees up host processing time by offloading connectivity, cryptography, and security from the application processor
      • Developers can take advantage of 10 simultaneous TCP/UDP sockets; two listening sockets; SMTP, MIME, POP3, FTP, Telnet, and HTTP clients; a Web server with one website for the application and another for configuring iChipSec; and serial-to-IP bridging
      • Socket iWiFi supports 64-/128-bit WEP encryption, SSL3/TLS1, WPA1, and WPA2 [...]
    • Nano Socket iWiFi
      Nano Socket iWiFi is an embedded 802.11b/g module which includes an Embedded TCP/IP and SSL stack (+)

      Features:

      42229.jpg
      • It does not require any driver development and is compatible with any MCU/CPU
      • Embedded TCP/IP and SSL stack - no driver development is required for any MCU/CPU
      • Embedded antenna facilitates deployment
  • Digi International  (2)
    • ConnectCore Wi-MX51
      Core module designed specifically for low-power, wireless multimedia applications (+)

      Features:

      43807.jpg
      • First wireless enabled core module based on Freescale's new high-performance i.MX51 processor
      • First to offer 802.11 a/b/g/n Wi-Fi and first to support Microsoft's new Windows CE 6.0 R3
      • The ConnectCore Wi-MX51 enables wired and Wi-Fi networking for low power embedded applications with demanding performance requirements such as displays within medical devices, digital signage, security/access control devices, point-of-sale equipment and industrial automation technology
    • iDigi start kits
      iDigi is termed “Platform as a Service” (PaaS) for developing wireless applications. With access to a sandbox development environment and other hosted software over a Web services interface, the platform connects to devices seamlessly so developers can focus on applications (+)

      Features:

      41800.jpg
      • The iDigi X4 Starter Kit ZB is ZigBee-based, with an XBee module, wall router, light and temperature sensors, and an IP-to-ZigBee gateway
      • The iDigi Wi-9P Starter Kit ZB has an ARM9 module, Wi-Fi module, ZigBee module and wall router, the same light and temp sensors, and a Python-based software environment
      • The iDigi BL4S100 Add-on Kit ZB adds a Rabbit BL4S100 SBC with its I/O features
  • EnOcean  (1)
    • STM100
      Energy harvesting (+)

      Features:

      21477.jpg
      • Self powered
      • Battery-less
      • Maintenance free
  • EUROTECH  (10)
    • AVL Light
      A low-power standard system platform specifically designed for demanding cost-sensitive real-time vehicle tracking applications (+)

      Features:

      • Combines a powerful low-power embedded CPU with advanced in-vehicle peripheral and wireless connectivity
      • Includes GPS satellite positioning with wireless communications over GSM/GPRS as well as Wi-Fi and data transfer using a Fast Ethernet connection [...]
    • PROTEUS
      Stand-alone single board computer aimed at wired and wireless, net-centric multimedia applications, especially in situations where low power and high performance are required (+)

      Features:

      43530.jpg
      • Intel Atom Processor up to 1.6 GHz
      • 20-channel GPS receiver
      • Bluetooth or ZigBee wireless communications
    • PROTEUS COM Express
      PROTEUS COM Express is a processor module aimed at wired and wireless, net-centric multimedia applications, mainly in situations where low power and high performance are required (+)

      Features:

      43711.jpg
      • Intel Atom processor up to 1.6 GHz
      • Intel SCH US15W chipset
      • Memory: Up to 1 GB (400/533 MHz) DDR2 SDRAM; 4 GB parallel ATA Flash on board (optional)
    • PROTEUS COM Express
      COM Express module aimed at wired and wireless net-centric multimedia applications where low power and high performance are required (+)

      Features:

      39516.jpg
      • Intel Atom processor up to 1.6 GHz
      • Intel SCH US15W chipset
      • Up to 1 GB (400/533 MHz) DDR2 SDRAM, 4 GB PATA flash (optional)
    • Helios
      Intel® Atom™ Z5xx processor (+)

      Features:

      43000.jpg
      • Wind River Linux 3.0 or Windows® Embedded Standard or Windows® CE 6.0
      • Programmable to run customer specific application software
      • 3x USB 2.0 PORTS Bay for wireless devices and storage
    • Catalyst FX
      Extensive I/O and audio/video ports for HDMI/DVI, XVGA, and LVDS (+)

      Features:

      45044.jpg
      • Leverages Eurotech's Catalyst Module and Catalyst Module XL, based on the Intel Atom processor
      • Allows for several wireless options and an onboard GPS receiver for fleet management and tracking applications
      • Runs Windows Embedded Standard 7
    • ADBC
      COM Express modules (+)

      Features:

      • Employs the Freescale P1021 QorIQ processor for lowest power operation
      • Suited for multi-service gateways, Ethernet switch controllers, wireless LAN access points and high-performance general purpose control processor applications
      • Offers IEEE1588 for networking applications and Gigabit Ethernet for communications-intensive applications as well as multimedia and standard I/O support [...]
    • COM-1289
      Integrates two chipsets: the Fastrax iTrax03 12-channel GPS receiver with urban canyon and dense foliage capability, and the Siemens MC55 tri-band GSM/GPRS wireless terminal supporting SMS, high-speed GPRS data, fax, and voice communication (+)

      Features:

      32908.jpg
      • Features include an onboard locking SIM card slot, an audio I/O port for a voice headset, two 16C550-compatible UART ports, and jumperless configuration via EEPROM [...]
    • Catalyst EC ICE
      For applications such as Remote Telematics, Wireless Data Acquisition, Multimedia and Process Control (+)

      Features:

      • It provides all the benefits of Intel's latest Atom LPIA architecture in a rugged enclosure comprising a processor module and carrier board
      • The rugged CE compliant system offers a high-performance, low-power consumption fanless solution, which is compatible with all major desktop and embedded operating systems
      • The Catalyst EC ICE comes with a comprehensive range of onboard peripherals, and offers expansion possibilities via a PCI Express Mini Card socket
    • COM-1480
      High-speed multimode wireless communication module (+)

      Features:

      35716.jpg
      • PC/104-Plus Version 2.0-compliant architecture
      • PCI Express Mini Card module with tri-band HSUPA/HSDPA/UMTS (up to 7.2 Mbps downlink) and quad-band EDGE/GSM/GPRS (up to 236 Kbps downlink)
      • Optional dual-band CDMA 1x EV-DO Rev A/1x EVDO Rel 0/1x RTT (up to 3.1 Kbps downlink)
  • GreenPeak Technologies  (2)
    • Lime CM-08
      A tiny 5 cm2 (< 1 square inch) device that functions as a stand-alone communications system with transceiver, antenna, and low-power mesh network software onboard (+)

      Features:

      • Wireless transceiver and sensor interface allow users to connect appropriate sensors such as photocells, vibration detectors, infrared, or other devices
      • Onboard software adapts the available power to the device's consumption
      • Built-in mesh technology enables designers to create extended wireless IEEE 802.15.4 open standard [...]
    • EMERALD GP500C
      The Emerald GP500C is a communications controller chip for ultra low power wireless sensor networks (+)

      Features:

      37646.jpg
      • Has extreme low power features that enable energy harvesting solutions for wireless sensor networks
      • Incorporates a transceiver with a fully integrated communications layer and an on-chip energy manager
      • Is an “autonomous transceiver” able to drive and control the data communication instead of being driven by a microcontroller [...]
  • Grid Connect  (2)
    • ConnectSense
      ConnectSense is a platform of low-cost, cloud-based Wi-Fi 802.11b/g wireless sensors that monitor changes in the user’s environment and then sends notifications via phone call, email, text or Tweet. Sensors are available to monitor temperature, humidity, water, motion, security and light. (+)

      Features:

      268419209871919406.jpg
      • Wireless sensor
      • Works using Wi-Fi, no recurring monthly charges
      • DIY installation
    • WiPort
      A device server that converts a serial data stream to 802.11b packets with changes to the software (+)

      Features:

      • Built in Web server
      • Additional input/output pins available for custom use
      • Certified by the Federal Communications Commission (FCC)
  • HABEY USA  (2)
    • MIT-1800
      Compact Intel Atom based fanless embedded PC with four mini-PCIe slots, dual SIM and 3G wireless support (+)

      Features:

      • The WIT-1800 is developed around Intel's power-efficient Atom N450 and D410 processors plus ICH8M chipset
      • This unique four built-in mini-PCIe design enables the system to support two 3G mini-PCIe modules for dual 3G wireless communication as well as WiFi, SSD and other mini-PCIe devices
      • Standard interfaces include: one VGA port supports up to 2048x1536
    • MITX-6852
      Includes six SATA II ports, PCI Express, built-in Intel Matrix Storage Technology and Intel Core 2 Duo processor support (+)

      Features:

      39312.jpg
      • Perfect for NAS,NVR, thin Server applications
      • Support Intel Core 2 Duo, Core Duo and Celeron M processors
      • Built-in 6 individual SATA II channels, support 2 eSATA ports
  • Integrated Device Technology, Inc.  (2)
    • IDT70K2000 PPS
      Serial RapidIO pre-processing switch targeting DSP clusters and accelerates wireless baseband processing applications, while supporting the serial RapidIO interconnect specifications (+)

      Features:

      31724.jpg
      • integrates a suite of byte- and packet-level manipulation capabilities designed to offload bandwidth intensive tasks from the DSPs, allowing wireless base station designers to create scalable, flexible, and cost-effective solutions
      • The result can be an acceleration of each DSP in a cluster by up to 20 percent, enabling the DSPs to focus on other compute-intensive functions in wireless base stations
      • Central to the DSP Farms processing architecture and performs a variety of data processing on the payload of sample packets to accelerate the subsequent algorithmic operations of a receiving processor (DSP, CRP, FPGA)
    • 80KSW0005
      The new IDT serial RapidIO central packet switch addresses the interconnect needs of embedded applications (+)

      Features:

      37593.jpg
      • Incorporates in-house fourth-generation IDT SerDes and Serial RapidIO core switch technology to provide customers with superior flexibility, scalability, performance and power consumption at very competitive costs
      • Supports Serial RapidIO packet switching (including unicast, multicast and optional broadcast) from any of its 10 input ports to any of its 10 output ports and is pin-to-pin compatible with the existing IDT PPS family of devices, allowing customers the flexibility to upgrade their next-generation systems to the more powerful pre-processing solution with no impact on hardware or board design
      • The CPS solutions are supported by AdvancedTCA- and MicroTCA-compatible dedicated development platforms together with a comprehensive range of software development tools, such as GUI, API, drivers and third-party tools
  • Intrinsyc Software  (2)
    • i-RIL and i-MUX
      The i-RIL (Intrinsyc Radio Interface Layer) and i-MUX (Intrinsyc Multiplexer) are off-the-shelf software components for wireless handheld development (+)

      Features:

      • Can be used with wireless handhelds based on Windows Mobile 2003 software for Pocket PCs and Smartphones
      • i-RIL provides the underlying technology for enabling wireless voice or data applications using Windows Mobile software to communicate with a GSM/GPRS or CDMA2000 modem
      • It is a customized layer of software code that operates with Microsoft's Cellcore telephony stack
    • CerfPod 270M Developer's Kit
      Intrinsyc Software's CerfPod 270M was designed in collaboration with Intel, and is a full-featured, flexible platform that is an ideal starting point for a next generation, mobile, wireless device or embedded solution (+)

      Features:

      • Based on the newest Intel XScale processor, the PXA270, and the Intel 2700G Multimedia Accelerator
      • Multimedia capabilities (full VGA support with video and 3D graphics acceleration), connection options, and board support package make it a comprehensive reference platform for creating a next generation high-end mobile, wireless, or embedded solution
      • High-contrast, 10.4” (diagonal), 256K color, 640x480 resolution, TFT LCD with CCFL backlighting and a resistive touch screen; landscape and portrait modes
  • Kontron  (6)
    • M2M Developer Kit
      Consists of a COM Express® compatible Kontron nanoETXexpress-TT COM using the Intel® Atom™ processor E640 1 GHz and other Kontron M2M System boards housed in a small, 67mm x 100mm x 27mm chassis (+)

      Features:

      52498.jpg
      • The external USB port simplifies use of M2M SDKs provided by M2M ISVs
      • Sufficient storage is provided for M2M smart service applications, middleware and OS on the 4 gigabyte (GB) internal MicroSD card
      • Built-in accelerometer, dual HDMI and HD audio support enables designers to implement both movement tracking and intensive audio/video smart services features
    • ECM
      A ruggedized, small-form factor PC engine for high-performance, application-specific mobile systems (+)

      Features:

      20607.jpg
      • Measures 6.5” (L) x 4” (W) x 1.8” (H)
      • Light weight and small enough for body-worn systems
      • Third-party, MIL-STD-810F certified packaging
    • Embedded Computing Module (ECM)
      Small, lightweight, military rugged design (+)

      Features:

      • Water, shock, and vibration resistant
      • Low power, high performance
      • Removable hard drive, 802.11 b/g wireless connectivity [...]
    • CVX-Server
      A low-power, high-performance Intel Pentium M-based embedded computing platform (+)

      Features:

      25293.jpg
      • Meets MIL-STD-810F ratings for shock, vibration, humidity, and temperature
      • Features a solid, rugged, unitized aluminum construction to protect internal subsystems
      • Offers impressive expansion capabilities, giving OEMs the flexibility they need to develop customer-specific systems
    • Flatpanel SBCs
      Complete SBC with a very low height based on low power Intel Celeron M and Pentium M processors (+)

      Features:

      35814.jpg
      • Wide range of software is available for this x86 platform
      • Along with very low power consumption, many onboard interfaces are available allowing systems to be designed within a very short period and brought to market with minimal engineering effort
      • Also offers a complete line of flatpanel controllers (aFLAT series), which enable easy plug-and-display integration of flatpanels in embedded applications
    • OM9140
      The Kontron OM9140 series of 10GbE ATCA application-ready platforms offers carrier-grade, high-density solutions across a common platform capable of being converted into dedicated or cross-functional network elements for 3G and 4G wireless, IMS, IPTV, and core network applications (+)

      Features:

      46579.jpg
      • Kontron is currently assisting our TEM clients in a multi-phase migration program that prepares them to develop immediately with 40G-ready AdvancedTCA platforms and within a timetable that meets all the technical, cost, and revenue needs of our carrier and service provider clients [...]
  • Luxoft  (1)
    • BitCatcher ZigBee Network Analyzer
      Free-to-download BitCatcher is a simple and powerful tool for analyzing wireless transmissions over IEEE 802.15.4/ZigBee-based networks covering both US and European ISM bands. BitCatcher parses and displays packet information based on a customizable protocol description. Developers can modify the descriptions to extend existing protocols or to create new ones. BitCatcher comes with the preloaded wireless protocol descriptions for IEEE 802.15.4 MAC, ZigBee PRO, ZigBee Smart Energy, and ZigBee Light Link. Drivers and firmware for Atmel hardware platform are also included. (+)

      Features:

      228303566312419251.jpg
      • Windows and Linux support
      • Support of various 802.15.4 frequency bands: 2.4 GHz, 868 MHz and 915 MHz
      • Native ZigBee and Light Link specific security schemes support
  • Luxul Wireless  (1)
    • Pro-WAV 100/200
      Pro-WAV 100 and 200 series Wi-Fi signal range extenders help customers save money and time during installation and maintenance (+)

      Features:

      • A single Pro-WAV 100 covers an area of 10,000 square feet (3,050 square meters) or more while penetrating most typical office construction and providing increased performance and quality over other wireless systems
      • A single Pro-WAV 200 can efficiently cover an area of 50,000 square feet (15,250 square meters) or more while penetrating office construction and providing increased performance and quality over other wireless systems
      • Both Pro-WAV systems are compatible with any 802.11 b/g Wireless Access Point (WAP) [...]
  • Microchip Technology, Inc.  (3)
    • PICDEM Z Demo Kit
      An ZigBee Technology wireless communication protocol development and demonstration platform (+)

      Features:

      • ZigBee software stack supporting RFD (Reduced Function Device), FFD (Full Function Device) and coordinator
      • Daughtercard with Microchip MRF24J40 IEEE-802.15.4 2.4 GHz transceiver
      • Microchip sniffer board with USB interface
    • MCP2030 AFE
      The MCP2030 is a stand-alone, analog front end (AFE) for smart, low frequency (125 kHz typical) wireless authentication applications such as passive-keyless-entry, tire pressure measurement systems (TPMS) and data acquisition. (+)

      Features:

      • Three input pins for three axis reception
      • Adjustable high input detection sensitivity (3 mVpp typical)
      • Programmable antenna tuning capacitance (63 pF, 1 pF/step)
    • ZG2100 Wi-Fi PICtail
      Microchip Technology and ZeroG Wireless have teamed up to enable Wi-Fi for a range of MCUs and DSCs in a small, low-power footprint (+)

      Features:

      • On an easy-to-use daughterboard (or PICtail in Microchip lingo, for their standard development kits), the ZeroG ZG2100M module controls MAC and baseband layers and connects to the Microchip host MCU or DSC using an SPI port
      • The host runs both a free TCP/IP stack and the system application
      • The small-footprint ZG2100M integrates the antenna, power amp, RF, and baseband circuitry into a fully FCC, IC, and ETSI certified module, saving both component costs and development time [...]
  • National Instruments  (2)
    • PXIe-8108
      High-performance embedded controller, which features an Intel Core 2 Duo T9400 processor and is designed to significantly reduce test times for PXI Express - and CompactPCI Express-based automated test systems (+)

      Features:

      42408.jpg
      • Engineers can use this 3U embedded controller in any PXI Express chassis to create a compact, high-performance PC-based platform for many test, measurement and control applications
      • With its 2.53 GHz dual-core processor, 800 MHz DDR2 memory and 1 GBps total system bandwidth, the NI PXIe-8108 is ideal for advanced RF and wireless test applications, high-throughput data acquisition systems and other applications that require intensive analysis, signal or image processing
      • NI PXIe-8108 optimizes RF and wireless test applications because measurement speed is related to the computational performance of the test system's controller
    • NI-5620
      A single-channel PXI/CompactPCI digitizer (+)

      Features:

      • For applications ranging from ultrasound and high-resolution ATE to digital communications analysis such as cable, DSL, and wireless test
      • 64 Msamples/sec
      • 10 KHz to 36 MHz (-3 dB bandwidth)
  • NEXCOM International Co LTD  (1)
    • Mobile Tablet PC
      Intel Atom Processor N450 based 8" Fan-less Tablet PC Supports / Touch Screen/ Laser Barcode Scanner/ RFID / 3.5G wireless/ GPRS/ Wi-Fi/ Bluetooth/ Digital Camera (+)

      Features:

      45721.jpg
      • Hot Swappable Battery
      • 8" LCD (VGA with LED backlight) with 5-wires resistive touch screen
      • Daylight Readable Display
  • Panasonic Computer Solutions Company  (1)
    • CF-30 Toughbook
      A next-generation rugged “Toughbook” notebook computer (+)

      Features:

      32597.jpg
      • Ideal for mobile applications and mission-critical environments
      • Intel Core Duo Processor L2400 (2MB L2 cache), processor speed 1.66 GHz, 667 MHz FSB
      • 80 GB or 60 GB HDD, shock mounted and removable
  • Phoenix Contact  (5)
    • RAD-80211-XD-BUS
      Wireless Ethernet Radio with modular I/O and firmware capabilities (+)

      Features:

      • Combines truly secure wireless communication with control of up to eight I/O modules
      • Up to 64 digital, analog, and pulse I/O can be interfaced directly to the radio
      • This flexibility saves installed cost for distributed Ethernet wireless I/O monitoring and control applications
    • RAD-WHG/WLAN-XD
      Phoenix Contact's new WirelessHART gateway features an integrated 802.11b/g WLAN transceiver (+)

      Features:

      46083.jpg
      • The rail-mount gateway can increase the reliability and flexibility of a HART system
      • The 45 mm-wide RAD-WHG/WLAN-XD connects up to 250 WirelessHART field devices, converting HART data to Modbus TCP or HART UDP for easy integration into almost any host system
      • The integrated WLAN can serve as the backhaul connection, allowing the gateway to be installed in the field closer to the monitored devices
    • RAD-ISM-900-EN-BUS
      A busable 900 MHz radio is the newest addition to Phoenix Contact's Trusted Wireless Ethernet (TWE) portfolio of industrial wireless products (+)

      Features:

      • The RAD-ISM-900-EN-BUS allows direct connection of I/O modules to the radio
      • The radio allows the user to collect I/O without a remotely located PLC or I/O data concentrator
      • The bused I/O is made accessible to the network using the readily available MODBUS protocol
    • FL WLAN 5101
      The FL WLAN 5101 offers high-speed wireless networking up to 300 Megabits per second (Mbps), meeting the needs of the most bandwidth-demanding applications such as IP-based video surveillance, plant networking and mobile operator access for programming and maintenance. (+)

      Features:

      225475709981449187.jpg
      • Offers high-speed wireless networking up to 300 Megabits per second (Mbps)
      • Meets the needs of the most bandwidth-demanding applications such as IP-based video surveillance, plant networking and mobile operator access for programming and maintenance.
      • The new CM (Cluster Management) technology simplifies wireless network management. All access points in a WLAN network can be easily configured and managed via a single web interface using any access point within the network, without additional costs for expensive hardware or software.
    • -SYS-NEMA4X-900
      Radio-ready enclosure simplifies the installation of industrial wireless radio modems and small RTU devices (+)

      Features:

      • Provides robust, secure solution for remote data collection while saving installation time and preventing wiring errors
      • Pre-wired power rail has space for either a Trusted Wireless or GSM/GPRS radio modem and other components
      • 24 VDC power with backup prevents failure of critical operations due to power dips and brownouts, while the surge arrestor protects against lightning and surges
  • SCL Elements  (1)
    • CAN2GO
      Second generation CAN2GO Universal and VAV controllers (+)

      Features:

      52792.jpg
      • GW2 gateway
      • 400 MHz processors
      • 64MB of RAM
  • SENA Technologies  (2)
    • PSx10W Series
      Wireless Device Server product line (+)

      Features:

      35186.jpg
      • 802.11b/g type wireless network interface, WPA2 and 802.11i compliant wireless security
      • flexible operation mode
      • TCP/UDP multicasting, telnet COM port control protocol support (RFC2217 compliant)
    • Promi-SD Adapter
      The Promi-SD is a Bluetooth serial adapter product line designed to replace RS-232 serial cables with wireless connectivity when interconnecting peripheral devices (+)

      Features:

      • Provides transparent RS-232 serial cable replacement
      • Supports Bluetooth Serial Port Profile and Generic Access Profile
      • Interoperability with PDA, laptops, and more
  • Sierra Wireless  (1)
    • MC8780 embedded mod
      Fujitsu Siemens Computers has selected the new Sierra Wireless MC8780 embedded module for integration into the newly launched LIFEBOOK P7230 professional notebook. (+)

      Features:

      • The Sierra Wireless MC8780 embedded module offers faster download speeds than previous models, with peak data rates of up to 7.2 megabits per second (Mbps). In addition, it is the first Sierra Wireless module designed for HSUPA networks, with uplink speeds more than five times faster than those available on current networks – up to 2 Mbps. The faster uplink speed is particularly important for customers who routinely send large files over the wireless network while mobile.
      • The LIFEBOOK P7230 is the first in the product line to migrate to the Sierra Wireless HSUPA module and is expected to begin commercial shipments in Europe this summer.
      • “Embedded UMTS enables easy data access whenever and wherever the users are. To optimize the benefits that embedded UMTS brings, speed is an integral part. The improvements to data speed and uplink provided by HSUPA technology are therefore another important step,” said Andreas Thimmel, Senior Vice President Volume Business at Fujitsu Siemens Computers. “We want the LIFEBOOK P7230 to offer the best possible mobile user experience, and collaborating with Sierra Wireless to integrate the latest in mobile broadband technology is a key part of delivering true mobility.”
  • Silex Technologies  (1)
    • SX-580-2700DM-SDK
      SX-580-2700DM-SDK is a software development kit designed for engineers who need to develop software programs in Linux for their embedded devices. Customers can develop and embed different types of applications with this SDK. Get to market faster with a secure wireless solution because the software provided with the module includes the Linux wireless driver, security supplicant, TCP/IP stack. The applications are limited only by your imagination. With a proven record in the medical, printer, telematics and industrial markets, Silex products have been recognized as market leading for over a decade. The development kit can provide a new and exciting way to integrate your applications into Silex’s quality. FEATURES: On board TCP/IP protocol stack and wireless driver User created Linux applications can be embedded to the SX-580 radio module. Industry-leading enterprise security including WPA, WPA2, WEP plus 802.1x authentication The SPI, I2C and GPIO interfaces in addition to the UART/USB/Ethernet interfaces are available for development Increased ROM memory to 32MB [...] (+)

      Features:

  • SMC Networks  (15 of 17)
    • SMC2870W
      A 2.4-GHz, 54 Mbits/sec, wireless, multi-mode, 802.11g adapter (+)

      Features:

      • Installs and communicates without drivers
      • Configurable as: a wireless access point, to provide network access to other wireless 802.11g and 802.11b devices; as a repeater, through its support for Wireless Distribution System (WDS), to extend the range of a wireless 2.4-GHz network using either a point-to-point or point-to-multipoint configuration; or as a wireless adapter, to connect virtually any Ethernet-capable device into a wireless network
      • Fully compliant with IEEE standards
    • SMC2586W-G
      A 2.4-GHz, 802.11g wireless bridge (+)

      Features:

      • Bridges two or more wired LANs
      • Configurable as an access point/bridge, bridge master, or bridge slave
      • Security features include 64-bit or 128-bit key WEP wireless data encryption, 802.1x, Wi-Fi protected access (WPA), disabled SSID broadcast, wireless client isolation, and MAC address filtering
    • SMC2671W
      A 2.4-GHz, 11-Mbit/sec, wireless Ethernet adapter (+)

      Features:

      • Platform independent network adapter
      • Plug-and-play installation; no drivers required
      • 802.11b compliant
    • SMC2862W-G
      A 2.4-GHz, 54-Mbps, USB 2.0 WLAN adapter that provides wireless conectivity for Windows-based devices (+)

      Features:

      • Compatible with USB 1.0, 1.1, and 2.0
      • Connects to IEEE 802.11g or 802.11b wireless networks
      • Includes the EZ Installation Wizard
    • EliteConnect Wireless
      An 802.11a/g universal wireless access point and CardBus adapter (+)

      Features:

      • Provides secure, high-performance wireless access for more than 128 simultaneous users
      • Managed via a Web interface or EliteView management software for SNMP-based management
      • Authentication and security features include WPA, 802.1x authentication, support for FUNK Odyssey and Microsoft RADIUS server, and RADIUS MAC address authentication [...]
    • SMC2670W
      A 2.4 GHz frequency band, wireless Ethernet adapter (+)

      Features:

      • Converts any Ethernet-equipped device into a wireless network device
      • Plug-and-play; no drivers required
      • Compliant with IEEE 802.11b
    • SMC2621W-x
      A line of 11 Mbits/sec wireless print servers for parallel (SMC2621W-P) or USB (SMC2621W-U) printing devices (+)

      Features:

      • Built-in Ethernet port and an 11 Mbits/sec, 802.11b wireless client onboard
      • Supports both ad-hoc mode and infrastructure mode
      • Includes EZ Installation and Setup wizard
    • SMC2536W-AG
      a universal, high-power wireless CardBus adapter for enterprise networking (+)

      Features:

      • Conforms to the 802.11a, 802.11b, and 802.11g standards
      • EZ Installation Wizard
      • Supports multiple profiles
    • SMC2835W
      A 2.4 GHz frequency band, wireless LAN, Cardbus adapter (+)

      Features:

      • IEEE 802.11g draft and 802.11b-compliant
      • Data rates of up to 54 Mbits/sec
      • Up to 1,115' operating range
    • SMC2802W
      A 2.4 GHz frequency band, wireless LAN, PCI adapter card (+)

      Features:

      • IEEE 802.11g draft and 802.11b-compliant
      • Data rates of up to 54 Mbits/sec
      • Up to 1,115' operating range
    • SMC2552W-G
      A 2.4-GHz, 802.11g wireless access point (+)

      Features:

      • Provides secure, high-performance, enterprie-class 802.11b and g network access
      • Wi-Fi protected access, up to 152-bit WEP encryption, AES, 802.1x authentication access control with key rotation, support for FUNK Odyssey, and Microsoft RADIUS Server
      • Up to 256 MAC address authentication, open/share authentication, disabled SSID broadcast, and up to 16 virtual LANs
    • SMC2455W
      A 2.4 GHz frequency band, autosensing, wireless LAN access point (+)

      Features:

      • Compliant with IEEE 802.11b
      • Data rates up to 22 Mbits/sec
      • Up to 1,155' operating range
    • SMC2482W
      A 2.4 GHz, autosensing, wireless LAN bridge (+)

      Features:

      • Compliant with IEEE 802.11b
      • Data rates up to 22 Mbits/sec
      • Up to 20 miles operating range with use of optional SMC high-gain antennas
    • EZ-Stream Receiver
      A high-end, networked entertainment receiver that streams, plays, and shares audio (including Internet radio), pictures, and video (+)

      Features:

      • Connects to a wired or wireless network for access to Internet resources
      • Links to entertainment devices, inluding televisions and stereo receivers, via standard A/V connectors
      • Uses 802.11a/g technology for universal compatibility, speed, and bandwidth
    • Barricade VPN Routers
      A line of secure broadband VPN routers (+)

      Features:

      • Integrated VPN server and VPN client to support multiple VPN connections using IPSec, PPTP, and L2PT protocols
      • 10/100Base-T WAN port for use with high-speed internet connections
      • COM port for use with an external dial-up or ISDN modem
  • Synapse Wireless Inc.  (3)
    • Synapse's SNAP
      Synapse's SNAP® technology is an award-winning IEEE 802.15.4, auto-forming, multi-hop, mesh network stack combined with an embedded Python interpreter for running application code (+)

      Features:

      42743.jpg
      • Self-healing mesh network
      • Instant-ON: communicate within milliseconds of power-up
      • All devices are peers - every node can bridge, route, and sleep
    • Synapse's SNAPconnect
      Synapse's SNAPconnect provides a seamless interface between devices on a wireless SNAP network and client applications either hosted either locally or across the Internet (+)

      Features:

      42749.jpg
      • Connect to any SNAP network anywhere in the world from anywhere in the world
      • Nothing to add to SNAP
      • Designed from the ground up to work with TCP/IP
    • Synapse Portal
      Synapse's Portal is a wireless application development environment for building SNAP mesh networks, and provides complete access to all functions in every node on the SNAP network (+)

      Features:

      42744.jpg
      • Comprehensive administration tool for SNAP networks
      • Participates as a full-fledged peer on the network
      • Runs on Windows (2000, XP, Vista) or Linux
  • Tellabs  (1)
    • VERITY 3100
      Family of echo cancelers and voice-quality enhancement solutions that remove both acoustic and hybrid echo, enabling wireless service providers to deliver wireline voice quality and echo-free service on both mobile-to-mobile and mobile-to-landline calls (+)

      Features:

      • Tellabs Acoustic Control (TAC) also eliminates the complex combination of acoustic echo encountered in the handset and hands-free mobile applications over digital wireless networks
      • Clipping is minimized and double-talk performance is enhanced
      • Tellabs Level Control (TLC) bidirectionally enhances the quality of landline and wireless telephone calls by automatically compensating for audio levels on a call-by-call basis
  • Texas Instruments, Inc.  (6)
    • Arria V FPGA RF Development Kit
      Altera Corporation and Texas Instruments Incorporated introduced a complete RF development kit that eases RF prototyping for systems based on Altera’s 28-nm Arria® V FPGAs. The modular Arria V FPGA RF Development Kit includes all the hardware and software needed for RF transmit, receive and digital pre-distortion feedback, reducing the amount of time needed to design and verify RF systems, such as wireless base stations, remote radio heads, and military radio and intelligence equipment, from months to weeks. (+)

      Features:

      205838756018942714.jpg
      • receive and digital pre-distortion feedback
      • , reducing the amount of time needed to design and verify RF systems
      • 2.5 times more transmit and digital pre-distortion feedback bandwidth
    • bq51013 wireless power receiver
      bq51013 wireless power receiver performs all three functions of rectification, voltage conditioning, and digital control (+)

      Features:

      52215.jpg
      • Small 1.9 mm x 3 mm package
      • Wireless Power Consortium Qi compliant
      • Features built-in protection against voltage, current, and temperature fault conditions and provides 93 percent peak efficiency
    • Resonant DC/DC Developer's Kit and Renewable Energy Developer's Kit
      The industry's lowest-power, single-chip RF platform for microcontroller-based applications (+)

      Features:

      41311.jpg
      • Combines low power and high functionality help bridge the gap between MCU and RF technology
      • Shrinks package and PCB size by 50 percent
      • Simplifies RF design
    • MSP-EXP430FG4618
      Development Tool Includes Two TI MSP430 MCUs, Chipcon RF Module Connector for Accelerated Ultra-Low Power Design (+)

      Features:

      • Along with the two 16-bit MSP430 devices, the board includes a TI (Chipcon) radio frequency (RF) module connecter for developing low power wireless networks
      • The F2013 is a small 4 mm x 4 mm, 14-pin device that features a fully programmable clock system that provides wake-up from an industry leading 500 nano-amp standby to full-speed operation in less than one micro-second
      • The F2013 device also includes a 16-bit sigma-delta analog to digital (ADC) for high-precision sensing systems, 2 KB of flash and 128 KB of RAM memory, and a basic serial communication interface (USI) which makes SPI and I2C implementations easy
    • TMS37157
      Industry's first passive low frequency interface with battery charge function from TI enables remotely powered medical, industrial and consumer products (+)

      Features:

      43704.jpg
      • Battery check and charge function via RF field supports operation of hermetically sealed devices such as implants
      • PaLFI memory is accessible via an SPI and wireless LF 134kHz interface allowing for access to additional microcontroller memory
      • The device can supply a battery powered MSP430 MCU with energy and operate the microcontroller even if the battery is empty ensuring data is still available and not getting lost
  • Unex Technology Corporation  (13)
    • DNXA-97
      DNXA-97 is a 802.11n b/g 2T2R in the smallest half-size mini card with PCIe form factor (+)

      Features:

      45199.jpg
      • The smallest half-size mini card with PCIe form factor in 2Tx/2Rx design is ideal for embedding into ultra-compact devices or embedding additional mini cards with complimentary technologies at comparable price points
      • Windows XP/Vista/7 drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
      • Atheros Direct Connect technology, which is forward compatible to the forthcoming Wi-Fi Alliance P2P standard, can establish a direct link with each other without the use of an access point (AP)
    • DNXA-95
      802.11n b/g wifi 1x1 PCIe half-size mini card, HB95/AR9285 (+)

      Features:

      • The smallest PCIe form factor in 1Tx/1Rx design is ideal for embedding into ultra-compact devices or embedding additional mini cards with complimentary technologies at comparable price points
      • Windows 2000/XP/Vista drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
      • Backward compatible to 802.11g and forward compatible to 802.11n provide the optimal upgrade path from legacy 802.11g solutions
    • DNUR-S2
      a 802.11n a/b/g wifi 2x2 MIMO USB module for USB-equipped wireless embedded systems and consumer electronics that demand robust link quality (+)

      Features:

      53329.jpg
      • 4.2cm x 2.5cm small dimension with 4-Pin USB 2.0 header is ideal for new ergonomic USB-equipped wireless embedded systems and consumer electronics
      • Windows 2000/XP/Vista/7 and Linux drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
      • Optimized RF architecture and baseband algorithms provide superior performance with low power consumption
    • DNXA-125: 11n b/g wifi mini card
      DNXA-125 is a 802.11n b/g 1T1R in the smallest PCIe half-size form factor using AR9485 single-chip solution features Atheros Align technology. (+)

      Features:

      204341291151742810.jpg
      • The smallest PCIe form factor in 1Tx/1Rx design is ideal for embedding into ultra-compact devices or embedding additional mini cards with complimentary technologies at comparable price points.
      • Windows XP/Vista/7 and ath9k drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration.
      • Backward compatible to 802.11g and forward compatible to 802.11n provide the optimal upgrade path from legacy 802.11g solutions.
    • DHXA-195
      DHXA-195 is the industry's first 1-stream 802.11n WiFi plus Bluetooth v2.1 combo solution on a single half-size mini card with PCIe form factor (+)

      Features:

      45200.jpg
      • 802.11n 1Tx/1Rx WiFi plus Bluetooth v2.1 combo solution on a single half-size mini card with PCIe form factor is ideal for embedding into ultra-compact devices or embedding together with complimentary 3G technology on the same platform
      • Advanced high-performance WiFi/Bluetooth coexistence schem allows faster Web surfing and file transfers, smooth media streams, and clear voice transmissions on the WiFi link, all with uninterrupted synching of wireless PC peripherals like mice and keyboard on the Bluetooth link
      • Windows XP/Vista/7 and Linux drivers enable ASD manufacturers to quickly and easily employ multi-radio coexistence on one platform with trouble-free WiFi and Bluetooth integration
    • DNUA-93
      An 802.11n b/g WiFi MIMO USB module designed to provide enhanced WiFi performance for embedded WiFi products that host processors not originally intended to support WiFi functions (+)

      Features:

      42826.jpg
      • Integrated CPU and memory to run more of WiFi function on-chip to offload wireless processing overhead from the host appliance
      • 35 x 18mm small dimension with standard USB connector is ideal for embedding into new ergonomic home gateways, set-top boxes, gaming consoles, printers, and variety of other embedded WiFi products
      • Windows 2000/XP/Vista, and Linux drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
    • OBU-102: 802.11p ETSI TC ITS OBU
      Unex’s OBU-102 is an integrated 802.11p ETSI TC ITS Wireless Communication System designed for deploying V2V, V2R, and V2I Intelligent Transportation System (ITS) applications as On Board Unit (OBU) mounted in a vehicle to improve traffic safety on the roadways. (+)

      Features:

      206506069151899967.jpg
      • Pre-installed IEEE 802.11p driver and ETSI TC ITS CAM, DENM, BTP, GN6, GN, ITS-G5A compliant protocol stack in binary code for operation in the ITS-G5 channels.
      • Software development kit (SDK) tools enable software developers to directly deploy V2V, V2R, and V2I Intelligent Transportation System (ITS) applications on time and within budget.
      • Binary code software modules of GPS, CAN Bus, and 3.5G HSDPA provide application flexibility on Intelligent Transportation System (ITS).
    • DNUA-93F
      802.11n b/g wifi USB adapter designed to provide enhanced WiFi performance for products that host processors not originally intended to support WiFi functions (+)

      Features:

      • Integrated CPU and memory to run more of WiFi function on-chip to offload wireless processing overhead from the host appliance
      • 30(L) x 17(W) x 8.5(H) mm small dimension with standard USB connector is ideal for new ergonomic home gateways, set-top boxes, gaming consoles, printers, IP cameras, and variety of other WiFi products that host processors not originally intended to support WiFi functions
      • Windows XP/Vista/7, and Linux drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
    • DNUA-93F
      802.11n b/g wifi USB adapter designed to provide enhanced WiFi performance for products that host processors not originally intended to support WiFi functions (+)

      Features:

      • Integrated CPU and memory to run more of WiFi function on-chip to offload wireless processing overhead from the host appliance
      • 30(L) x 17(W) x 8.5(H) mm small dimension with standard USB connector is ideal for new ergonomic home gateways, set-top boxes, gaming consoles, printers, IP cameras, and variety of other WiFi products that host processors not originally intended to support WiFi functions
      • Windows XP/Vista/7, and Linux drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
    • RNRA-N1 PCBA
      RNRA-N1 PCBA is an 802.11n b/g 1x1 AP/Router, which leverages the 802.11n 1–stream specification to provide the optimal upgrade path from legacy 802.11 solutions (+)

      Features:

      44354.jpg
      • The single-stream feature enables a new class of WiFi devices that deliver up two to three times performance enhancements over the existing 802.11g technology at comparable price point
      • 802.11n 2.4 GHz 1x1 AP/Router leverages the 802.11n 1–stream specification to provide the optimal upgrade path from legacy 802.11 solutions
      • AP/Router board with Rx antenna diversity design effectively doubling the wireless coverage over legacy 802.11g
    • CM10-HP
      CM10-HP (MMCX) is a high power 600mW(28dBm) IEEE802.11a/b/g 108Mbps wifi mini-PCI module with one MMCX RF connector (+)

      Features:

      • Extra power margin on current overshot tolerance prevents system shot-down to ensure trouble-free integration with different main boards
      • Average power up to 200mW (23dBm) and peak power up to 600mW (28dBm) on both 802.11a and 802.11b/g dual modes provide superior wifi coverage and application flexibility
      • Accurate power control reduces in-band frequency interference to dramatically improve the data throughput and range performance in high-density enterprise and commercial hot-spot deployments
    • RNRA-83 PCBA
      Dual-concurrent 802.11na/ng 2x2 MIMO AP/Router board, AP96/AR7161+AR9220+AR9223+AR8316 (+)

      Features:

      42828.jpg
      • Dual-Concurrent 802.11na and 802.11ng design allows simultaneous operation of 2.4 GHz and 5GHz wireless network to offer the greatest number of available channels on system capacity and scalability
      • Two embedded antenna provides highest flexibility to optimize MIMO performance
      • Enables bandwidth up to 300 Mbps PHY/link rate per radio or 600 Mbps PHY/link rate per Access Point/Router, significantly increases the amount of bandwidth available for user applications
    • RPAA-82 PCBA
      Enterprise Access Point board w/ 2 mini-PCI sockets, PB44/AR7161 (+)

      Features:

      • Optional radio modules of 802.11n DNMA-83, high powered 802.11 a/b/g CM10-H(MMCX), and high-powered FCC 4.9GHz radio provides highest application flexibility to meet challenging RF environments in factories, warehouses, hospitals, and large retail establishments
      • Dual radio design allows simultaneous operation of 2.4 GHz and 5 GHz wireless network to offer the greatest number of available channels on system capacity and scalability
      • 802.3at high-powered POE+ sufficiently supports dual concurrent 802.11n radios to deliver full 3x3 MIMO performance
  • WinSystems, Inc.  (14)
    • Embed Connectivity
      The LBC-GX500 achieves significant advancement in the application of wired and wireless connectivity technology applied to single board computers (+)

      Features:

      33634.jpg
      • Connectivity options include 802.11 wireless Ethernet, GSM/GPRS/CDMA cellular modem, ZigBee wireless RF module, 10/100 wired Ethernet, global-compliant dial-up (POTS) modem, six USB ports, and six COM channels
      • Provides an open and powerful industrial platform for management of geographically distributed machinery and sensors with a operational temperature of -40 °C to +85 °C
      • Full-featured SBC with a variety of on-board peripherals which eliminate the need for other I/O card
    • PCM-ZIGBEE
      WinSystems' PCM-ZigBee is a PC/104-compatible board configured with a ZigBee wireless transceiver plus an optional Trimble GPS receiver (+)

      Features:

      35122.jpg
      • Addresses the unique need of most remote monitoring and control and sensor network applications
      • IEEE 802.15.4 ZigBee wireless interface
      • PC/104-compatible with XBee Pro transceiver
    • PXM-MiniPCIe
      SUMIT-ISM board format defined by the SFF-SIG (+)

      Features:

      45042.jpg
      • Features a PCI Express (PCIe) MiniCard socket, which supports PCIe x1 and USB 2.0, as well as connections to an SMBus, LEDs for wireless network visual status, a SIM card for GSM and WCDMA application data storage, and a +1.5 and +3.3 V power source for the MiniCard
      • Can support different applications in the same socket
      • The removable MiniCard enables the addition of wireless functions such as WLAN, 802.11 a/g, cellular data, and Bluetooth
    • 802.11 Module
      IEEE 802.11b/g Wi-Fi wireless LAN support (+)

      Features:

      • Up to 54 Mbps at 2.4 GHz
      • Industry standard wireless LAN security
      • Supports single or dual antennas
    • PPM-Wireless
      IEEE 802.11b/g standard, dual-mode, Wi-Fi-certified wireless LAN support (+)

      Features:

      20939.jpg
      • Up to 54 Mbps at 2.4 GHz
      • Industry-standard wireless LAN security support and upgradeable support for AES software implementation
      • Support for optional antenna for optimized WLAN performance for multi-antenna systems
    • PCM-GPS
      A dual-function PC/104 module featuring a GPS receiver and cellular modem (+)

      Features:

      25323.jpg
      • Ideal for fixed and mobile embedded applications that require navigation, tracking, data logging, timing, and/or communications functions
      • GPS features: Lassen GPS receiver module provides position, velocity, and time data; TSIP, TAIP, and NEMA 0183 protocols; very low power requirement; supports pulse output for accurate time standard; external powered antenna connection via a standard SMA connector
      • Cellular wireless features: supports both GSM/GPRS and CDMA; socket support for Multitech wireless module; recognizes standard AT commands; alarm management, phone book management, and Short Message Services (SMS); Bluetooth support available soon
    • Mini
      SUMIT-ISM module supports MiniPCIe cards for a variety of Wireless Technologies (+)

      Features:

      45062.jpg
      • Adds wireless LAN, WPAN, or WWAN communications to SUMIT-based systems
      • SUMIT-ISM module with MiniPCIe and USB support
      • MiniPCIe Connector includes: support for both Full and Half size PCIe MiniCards
    • M2M Enabled SBC
      AMD Geode GX500@1W processor (+)

      Features:

      • High-resolution video controller supports CRT or LCD panels
      • 10/100 Mbps Ethernet controller and wireless 802.11
      • Supports POTS modem, GPRS/CDMA cellular modem, ZigBee and optional GPS receiver module
    • LBC-GX500 SBC
      A highly integrated SBC with GSM/CDMA, ZigBee, wireless 802.11 Ethernet, 10/100 Ethernet, dial-up modem, six USB ports, and six COM channels all on one card (+)

      Features:

      32072.jpg
      • AMD Geode GX500 @ 1 W processor with -40 °C to +85 °C operation
      • EBX-size board, 5.75" x 8.00" (147 mm x 203 mm)
      • Up to 512 MB of system PC2700 DDR SDRAM supported in a 200-pin SODIMM socket
    • I/O-Intensive SBC
      A small, rugged, EPIC-compliant board (+)

      Features:

      35876.jpg
      • AMD GX500 at 1 W processor
      • Video with CRT or flat panel support
      • Ethernet, two USB, four COM, and 24 DIO channels
    • 12.1-inch Open-Frame Panel PC for Indust
      WinSystems' 12.1-inch open frame, color flat panel PC and 1.66GHz single board computer (SBC) based on the Intel® Atom. PPC3-12 is a compact, ready-to-mount flat panel display subsystem that also includes a resistive touchscreen integrated into a chassis less than 3" deep. It is perfect for networked applications since it is shipped with a wired Ethernet connection plus expansion option for 802.11 wireless Ethernet and/or CDMA/GSM cellular modems. The unit will operate from -30° to +70°C without the need of a fan. (+)

      Features:

      209658510052926618.jpg
      • Compact 12.1-inch AM TFT Flat Panel Display, 1024 x 768 resolution with LED backlight
      • Quick-response resistive touchscreen included
      • Includes PC-compatible Atom SBC with Fanless single core 1.66GHz Intel Atom N455 or dual core 1.8GHz D525
    • PCM-GPS
      A dual function PC/104-compatible module that supports both a GPS receiver and a socket cellular modem (+)

      Features:

      • GPS receiver provides position, velocity, and time data
      • Supports TSIP, TAIP, and NEMA 0183 protocols
      • Cellular wireless supports both GSM/GPRS and CDMA
    • GPS Receiver Module
      A dual function PC/104-compatible module that supports both a GPS receiver and a socket cellular modem (+)

      Features:

      • GPS receiver provides position, velocity, and time data
      • Supports TSIP, TAIP, and NEMA 0183 protocols
      • Cellular wireless supports both GSM/GPRS and CDMA
    • Fanless 1GHz SBC
      The EBC-855-G-1G-0 is a highly integrated, low cost ($595), EBX single board computer designed for rugged, performance driven applications. It operates over a temperature range of -40 °C to +70 °C without a fan and is designed for applications including industrial automation, security, medical/diagnostic equipment, MIL/COTS, test and measurement, and transportation (+)

      Features:

      33637.jpg
      • Includes support for both wired and wireless Ethernet (with remote boot capability), simultaneous support of both SVGA and LVDS flat panel video, four USB 2.0 ports, four serial COM ports, AC97 audio, PS/2 keyboard, LPT, and 48-lines of digital I/O
      • Supports a maximum of 1 GB of industry-standard PC2700 SDRAM, up to 8 GB of CompactFlash, plus support for hard and floppy disk drives
      • PC/104 and PC/104-Plus expansion is supported for additional special I/O requirements
08/23/14 13:21
Close

Subscribe to Embedded Wireless updates