Embedded Wireless

Showing results for: 802.11
Refine Embedded Wireless companies and products:
embedded wireless m2m onstar lte wimax white-space near-field communications nfc wireless 802.11 wi-fi zigbee 802.15 802.15 4 module 802.15.4 airbee airbee wireless cc2420 cc2430 chipcon cc2420 compxs em2420 home automation homerf ieee 802.15 ieee 802.15 4 ieee802.15.4 long range wireless mc13191 mc13192 mesh networking module radio rf modems rf module rf modules rf receiver rf transceivers rf transmitter wireless remote control wireless sensors wpan wpans zdo zig bee zigbee-ready zigby zmd wireless sensor networks wireless sensor network
Click on any vendor
to see a listing of
802.11 related products.
  • ADLINK Technology, Inc.  (15 of 41)
    • cPCI-6765
      6U CompactPCI, low power Pentium III Non-bus PICMG 2.16 blade (+)

      Features:

      20710.jpg
      • PICMG 2.16 CompactPCI Packet Switching Backplane (cPSB) Compliant
      • PICMG 2.9 System Management Bus compliant
      • Mobile Pentium III 850 MHz CPU
    • cPCIS-6400U Series
      A series of CompactPCI enclosures (+)

      Features:

      16543.jpg
      • Standard 6U CompactPCI and PICMG 2.5 H.110 CT bus
      • PICMG 2.1 hot swap compliant, 32-bit or 64-bit, five-slot CompactPCI backplane with J3 and J5 rear I/O
      • One CompactPCI segment, upper-side system slot
    • cPCI-6830
      A 6U, 64-bit/66 MHz, CompactPCI, dual Tualatin CPU module with DDR, triple LANs, and VGA (+)

      Features:

      14800.jpg
      • PICMG 2.0 CompactPCI Specification R3.0 compliant
      • PICMG 2.1 CompactPCI Hot-Swap Specification R2.0 compliant
      • Standard 6U form factor with 2-slot (8TE/HP) space
    • cPCI-6760D
      A 6U, single-slot, low-power Pentium III CompactPCI module (+)

      Features:

      11976.jpg
      • Can be used as a blade server, networking device, or multi I/O controller
      • Compliant with PICMG 2.0 CompactPCI Specification R2.1 and PICMG 2.1 R1.0 CompactPCI hot-swap specification
      • Low-power BGA2 Pentium-III/Celeron CPU running at 100 MHz FSB
    • cPCIS-6230R
      2U rackmount chassis with 1U ATX power supply (+)

      Features:

      20802.jpg
      • 19" rackmount, 2U height for 6U CompactPCI boards with 80 mm rear I/O
      • Suitable for one dual-slot system module
      • Standard 6U CompactPCI and PICMG 2.5 H.110 CT Bus
    • cPCI-3720
      A 3U, CompactPCI, low power Pentium-III/Celeron CPU module (+)

      Features:

      14801.jpg
      • PICMG 2.0 CompactPCI specification R3.0 compliant
      • PICMG 2.1 CompactPCI Hot Swap specification R2.0 compliant
      • Standard 3U form factor
    • cPCIS-3300 series
      A 9U rackmount CompactPCI H.110 CT bus subsystem (+)

      Features:

      • Standard 6U CompactPCI and PICMG 2.5 H.110 bus
      • PICMG 2.1 hot-swap-compliant, 32-bit or 64-bit, eight-slot CompactPCI backplane with P3 and P5 rear I/O
      • One CompactPCI segment, right-hand-side system slot
    • cPCIS-3330
      A CompactPCI enclosure (+)

      Features:

      16542.jpg
      • Standard 6U CompactPCI and PICMG 2.5 H.110 CT bus
      • PICMG 2.1 hot swap compliant, 32-bit or 64-bit, eight-slot CompactPCI backplane with J3 and J5 rear I/O
      • One CompactPCI segment, right-hand-side system slot
    • cPCI-6240
      A 6U, CompactPCI network processor board (+)

      Features:

      15083.jpg
      • Based on the Intel IXP2400 network processor, which includes a 600 MHz XScale core and eight 600 MHz microengine processors on a single chip
      • Processor PMC site for additional control-plane processing
      • Up to 512 Mbytes DDR DRAM
    • cPCIS-2500 Series
      3U CompactPCI, 6-slot cubic chassis with CompactPCI power module and Optional LCD (+)

      Features:

      20727.jpg
      • Compact size, 4U high enclosure for 3U CompactPCI cards
      • Side handle design for portable applications
      • Stand feet on the bottom side for desktop application
    • cPCI-8602
      6U CompactPCI Dual 64-bit PMC slots carrier board (+)

      Features:

      • PICMG 2.0 R3.0
      • Support two 64-bit PMC sites
      • CompactPCI bus: Up to 64-bit/66 MHz, Intel 21154 PCI to PCI transparent bridge
    • cPCI-6810
      6U CompactPCI, Pentium III Low Voltage processors (+)

      Features:

      20805.jpg
      • Single-slot, 64-bit/66 MHz universal SBC
      • Single slot 6U CompactPCI
      • Universal 64-bit/66 MHz CompactPCI bus, hot-swappable
    • cPCI-6860
      A 6U CompactPCI single board computer (+)

      Features:

      14765.jpg
      • Supports dual Intel Xeon processors up to 2.4 GHz, as well as Low Voltage Intel Xeon processors
      • Uses the Intel E7500 chipset
      • Supports up to 4 Gbytes of DDR-200 registered memory with ECC
    • cPCI-6840V
      6U CompactPCI, Pentium M 1.6 GHz universal blade, with VGA, KB/MS, 512 MB DDR, and one PMC (+)

      Features:

      20709.jpg
      • Highly integrated PCI-X Universal Blade
      • Supports Low Power Intel Pentium M processor with 1 MB L2 cache
      • Triple Gigabit Ethernet ports by Intel 82546EB and Intel 82546EM
    • cPSB-880 Series
      9U Packet Switched Blade Platform (+)

      Features:

      32464.jpg
      • Suitable development platform for telecom applications focusing on gateways such as media gateway, signaling gateways, as well as telecom value-added services like LBS (Location Based Service), RBT (RingBackTone), and MMS (Multimedia Message System)
      • Standard 6U CompactPCI and PICMG 2.16, 2.9 & H.110 CT Bus
      • Dual PICMG 2.16 fabric slots for switching-HA
  • Suntron  (1)
    • cPCI Communications Platform
      A 9U X 19-inch industrial chassis (+)

      Features:

      • 300-watt CompactPCI power supply
      • Integrated, replaceable fan tray
      • 8-slot 6U, H.110, CompactPCI backplane
  • Hartmann Elektronik  (6)
    • CPCI Express Eval.
      CompactPCI Express evaluation backplane (+)

      Features:

      32155.jpg
      • Runs either with CompactPCI 32-bit CPU or with CompactPCI Express CPU
      • One CompactPCI to CompactPCI Express bridge and one CompactPCI Express to CompactPCI bridge
      • PICMG EXP.0 Revision 1.0 with Power Connector
    • CompactPCI Serial Backplane
      The Hartmann Electronic cPCI Serial product range includes cPCI Serial Backplanes from 2 till 9 slot according to the current PICMG Specification. In addition Hartmann Electronic is offering different Serial-Power-Backplanes for redundancy and power sharing. The Hartmann Electronic Serial-Power-Supply with 300W is supporting 80 Plus gold efficiency, active current sharing, PMBus communication, N+1 redundancy and is hot-swappable. It can work in a range of -40°C to +70°C.The customer can select single components or the complete assembled and preconfigured system platform with different housing and cooling configutrations.The Hartmann Standard cPCI Serial system platform is a 4U 44HP desktop rack, equipped with a 300W power supply a 9 slot cPCI Backplane and 2 strong fans. This platform can be placed either stand alone or as a subrack inside a cabinet or wall mounted. (+)

      Features:

      333868198491137455.jpg
      • fully complient with PICMG
      • supporting up to PCI-E Gen3
      • supporting up to 10xGE
    • CPCI Series RA-6U
      A 6U, CompactPCI backplane (+)

      Features:

      16646.jpg
      • PICMG 2.0 Rev 3.0 compliant
      • 2 to 21 slots, 64 bit
      • +3.3 V and 5 VDC, 33 MHz or 66 MHz (less than five slots)
    • Positronic P47 Powerbackplane
      A power-backplane with a Positronic P47 connector (+)

      Features:

      • Designed according to the CompactPCI PICMG 2.0 R3.0 specification and the ATX power supply specification
      • Cascadable in a grid of 8 HP
      • Can be used in any card rack position without leaving any gaps
    • Extension Unit
      A CompactPCI to PCI extension unit (+)

      Features:

      • Permits up to 4 standard PCI cards to be inserted in a CompactPCI slot
      • Complete Windows support
      • Additional drivers not needed
    • Power backplane with M-connector
      Designed according to the PICMG 2.0 power supply unit connector pin assignment specification and the ATX power supply specification (+)

      Features:

      • Just as in the case of the RC variant, connector pin 1 is at the bottom
      • Power supply units known from the RC variant can also be used in systems in which the space directly next to the CompactPCI backplane is not available for a power supply unit
      • Preassembled cables can be used to supply power to backplanes of the RB and RA variants in a high-quality, safe and economic solution [...]
  • Advantech Corporation  (15 of 24)
    • Ready-to-Go cPCI Platform for Telecom
      MIC-3369A – CompactPCI 6U CPU board with Intel Pentium M Processor and Intel E7501-based hardware platform (+)

      Features:

      20485.jpg
      • Supports Intel Pentium M 745 processor @ 1.8 GHz/2 MB L2 cache and Pentium M processor @ 1.6 GHz/1 MB L2 cache
      • Dual gigabit Ethernet on board
      • Up to 2 GB (DDR-200) memory on board with ECC/One 64-bit/66 MHz PMC expansion slot
    • MIC-3042
      8-slot 6U CompactPCI backplane (+)

      Features:

      32851.jpg
      • AC or DC CompactPCI 500 W + 250 W redundant (2+1) power supplies
      • PICMG 2.16 (CompactPCI Packet Switching Backplane) compliance
      • PICMG 2.5 (CompactPCI Computer Telephony) compliance
    • MIC-3358
      A 6U CompactPCI Intel Pentium 4 Processor-M board up to 2.2 GHz (+)

      Features:

      14178.jpg
      • Dual Gigabit Ethernet onboard
      • Up to two Gbytes (DDR-266) memory onboard with ECC
      • Intel 845E chipset
    • MIC-3369
      A 6U CompactPCI Intel Pentium M processor board up to 1.6 GHz (+)

      Features:

      14177.jpg
      • Supports Dual Gigabit LANs
      • Up to 2 Gbytes (DDR-200) memory onboard with ECC
      • Intel E7501 chipset
    • MIC-3392L
      A high-performance, power-efficient CompactPCI single board computer based on the Intel Core 2 Duo processor (+)

      Features:

      43483.jpg
      • Supports Intel Celeron M 440 processor
      • Intel 945GME chipset supports 533/667 MHz FSB
      • Up to 2 GB (DDR2 533/667) memory with SODIMM expansion
    • MIC-3392 Intel® Core™2 Duo /Celeron® M 440 6U CPCI SBC
      The MIC-3392L is a full featured, but optimized version using the Intel Celeron M 440, and is ideally suited for cost-sensitive control plane applications (+)

      Features:

      44166.jpg
      • It is built on the proven MIC-3392 core design that uses the Intel 945 chipset for high-speed DDR2 onboard/pluggable memory, integrated graphics, and standard I/Os including onboard CompactFlash and 2.5" SATA HDDs
      • Dual GbE front ports and PICMG 2.16 support give it full connectivity for computer telephony, IPTV, satellite and high-performance applications such as radar, imaging, instrumentation, communications, telephony and industrial control
      • Additional flexibility is achieved through the onboard PMC socket, which can host additional Ethernet ports
    • MIC-3950
      6U dual PMC carrier board (+)

      Features:

      11890.jpg
      • 32-bit/33MHz CompactPCI interface
      • On-board PCI-to-PCI bridge
      • Uses a TI PCI2250 PCI-to-PCI bridge to generate the local on-board PCI bus, ensuring that only one load is present in the CompactPCI bus
    • MIC-3366
      A CompactPCI peripheral board with an integrated low-power Intel Pentium III processor at 700 MHz (+)

      Features:

      14175.jpg
      • Support up to 1 Gbyte of ECC SDRAM
      • Two PMC sites
      • Space for one 2.5” hard disk
    • MIC-3368C
      A low-power, 6U CompactPCI processor board (+)

      Features:

      • Intel low-power Pentium III-based processor at 700 MHz (BGA2)
      • Up to 1 Gbyte ECC SO-DIMM SDRAM memory
      • Two 32-bit PMC expansion slots
    • MIC-3390
      CompactPCI-based high-performance Intel Pentium M single board computer with PCI Express and IPMI 2.0-compliant interface (+)

      Features:

      30060.jpg
      • Suitable for mission critical telecom and data communication applications where high availability is essential
      • 6U CPU board provides telecom equipment manufacturers (TEMs) with increased throughput and improved call-handling capabilities for applications at the edge of the network such as application servers, media gateway controllers, and home location registers
      • High-speed, low-power computing
    • MIC-3392
      Supports Intel Core 2 Duo processor (+)

      Features:

      32852.jpg
      • Intel 945GM chipset supports 533/667 MHz FSB
      • Up to 4 GB (DDR2 533/667) memory with SODIMM expansion
      • Comprehensive I/O capability, dual Gigabit Ethernet, SATA, CompactFlash
    • Core™2 Duo Ruggedized 6U cPCI Board
      Supports board-mounted Intel Core Duo LV processor L2400 or the 64-bit Core2 Duo ULV processor U7500 (+)

      Features:

      35982.jpg
      • Intel 945GME chipset supports 533/667 MHz FSB
      • Up to 4 GB DDR2 533/667 memory with SODIMM expansion
      • Comprehensive I/O capability, with two dual Gigabit Ethernet through RIO, SATA HDD, CompactFlash, VGA port
    • 2U cPCI Enclosure with 4-slot BP
      4-slot 6U CompactPCI backplane (+)

      Features:

      • AC ATX 300 W + 300 W redundant (1+1) power supply
      • PICMG 2.5 (CompactPCI Computer Telephony) compliance
      • Hot-swappable fans provide outstanding ventilation
    • MIC-3359
      Higher performance -- Intel desk top Pentium 4 and Mobile Pentium 4 M processor up to 2.0 GHz-plus (micro FCPGA, Socket 478) (+)

      Features:

      18360.jpg
      • Intel 845GV chipset support 400/533MHz FSB
      • 6U 8HP form factor
      • Intel ICH4 Ethernet and reserve Intel 82551ER 10/100 Fast Ethernet (Intel 82540EM Gigabit LAN upgradeable )
    • MIC-3662D
      A dual Gigabit Ethernet CompactPCI PMC module (+)

      Features:

      17467.jpg
      • Dual Gigabit Ethernet ports
      • PCI-to-PCI bridge onboard
      • Designed for expanding high-density, dual Gigabit Ethernet networking in high-performance CompactPCI systems efficiently
  • CompwareCorp/Div. CAIC  (11)
    • CCLA-100
      6U CompactPCI Single Board Computer (+)

      Features:

      22080.jpg
      • SUN Microsystems UltraSPARC-IIi + (V9 architecture with VIS instruction set) operating at 650 MHz
      • 16 KB of L1 instruction cache
      • 16 KB of L1 data cache
    • Model CCEG-100
      6U CompactPCI Single Board Computer (+)

      Features:

      22083.jpg
      • PMC-Sierra RM7000B processor (MIPS IV instruction set) operates at 500 MHz
      • 16 KB L1 instruction cache
      • 16 KB L1 data cache
    • CCEC-100
      6U CompactPCI Single Board Computer (+)

      Features:

      22082.jpg
      • PMC-Sierra RM7000C processor at 600 MHz (SysAD bus runs up 150 MHz in HSTL mode)
      • 2 MB L3 Cache option (supports 150 MHz HSTL mode)
      • Single slot 6U compact PCI board (universal)
    • CCCR-100
      6U CompactPCI Single Board Computer (+)

      Features:

      22079.jpg
      • Intel Pentium M Processor running at 1.1, 1.4, 1.6, 1.8, or 2.0 GHz core frequency and 400 MHz Processor System Bus frequency
      • Single slot 6U CompactPCI board
      • Operates in a CompactPCI system slot or non-system slot (auto-senses)
    • CCCA-100
      6U CompactPCI Single Board Computer (+)

      Features:

      22078.jpg
      • Intel Pentium M Processor running at 1.1, 1.4, 1.6, 1.8, or 2.0 GHz core frequency and 400 MHz Processor System Bus frequency
      • Single slot 6U CompactPCI board
      • Operates in a CompactPCI system slot or nonsystem slot (auto-senses)
    • CCL-100
      6U CompactPCI Single Board Computer (+)

      Features:

      22081.jpg
      • UltraSPARC IIi processor operates at 650 MHz, or a IIe processor at 500 MHz
      • Single slot 6U CompactPCI board (universal)
      • Hot Swappable (PICMG 2.1 R1.0)
    • Model CCE-100
      6U CompactPCI Single Board Computer (+)

      Features:

      22085.jpg
      • RM7000A processor (MIPS IV instruction set) operates at 300/400 MHz
      • 16 KB L1 instruction cache
      • 16 KB L1 data cache
    • Model CCVB-150
      3U CompactPCI Single Board Computer (+)

      Features:

      22086.jpg
      • AMCC 440GX processor operates up to 800 MHz
      • 32 Kbytes L1 instruction cache and 32 KB L1 data cache
      • Occupies single 3U CompactPCI slot(universal)
    • CCCR-200
      6U Single Board Computer (+)

      Features:

      22076.jpg
      • Dual Intel Pentium-738/745/755 Processors running at 1.4, 1.8, or 2.0 GHz core frequency and 400 MHz processor system bus frequency
      • Two Intel 855GME Memory Controller Hubs with built-in 3D Graphics engine
      • Single slot 6U CompactPCI 2.16 node board
    • CCPR-100
      6U form factor Single Board Computer (+)

      Features:

      22075.jpg
      • IBM 750FX PowerPC processor operates at 733 MHz
      • Single slot 6U CompactPCI board (universal)
      • Hot Swappable (PICMG 2.1 R1.0)
    • CCP-100
      6U Single Board Computer (+)

      Features:

      22077.jpg
      • IBM 440GP processor operates at 466 MHz
      • 32 KB L1 instruction cache and 32 KB L1 data cache
      • Occupies single CompactPCI slot (universal)
  • GE Intelligent Platforms, Inc.  (15 of 21)
    • VMICPCI-P303
      Up to 16 slots, 6U single wide (4 HP) CompactPCI (CPCI) slots (+)

      Features:

      • +5V, 33 MHz PCI bus interface
      • 32 or 64-bit buses available
      • User-settable geographic address for each physical slot
    • VMICPCI-7806
      Intel's Pentium M processor up to 1.8 GHz or Intel's Celeron M processor up 1.3 GHz (+)

      Features:

      20499.jpg
      • 6U single-slot universal controller with up to 1 G of DDR SDRAM
      • Dual 3.3V PMC sites (one for 64-bit/66-MHz PCI, and one for 32-bit/33-MHz PCI)
      • Two GbE ports, two serial ports, two USB 2.0 ports, parallel and serial ATA, up to 1 GB of CompactFlash
    • VMICPCI-7806
      Intel's Pentium M processor up to 1.8 GHz or Intel's Celeron M processor up to 1.3 GHz (+)

      Features:

      19045.jpg
      • 6U single-slot universal controller with up to 1 GB of DDR SDRAM
      • Dual 3.3 V PMC sites (one for 64-bit/66-MHz PCI, and one for 32-bit/33-MHz PCI)
      • Two GbE ports, two serial ports, two USB 2.0 ports, parallel and serial ATA, up to 1 GB of CompactFlash
    • CPCI-7055
      The CPCI-7055 is a single slot CompactPCI Single Board Computer (SBC) offering exceptional processing performance via the IBM 750FX or 750GX PowerPC processor, that delivers a solution with the robustness, reliability, flexibility, and system features required for your most demanding embedded computing applications (+)

      Features:

      30057.jpg
      • The CPCI-7055 features the next generation Marvell Discovery III MV64460 chipset and offers up to 2 GB Double Data Rate (DDR) 400 SDRAM. The VMICPCI-7055 also features dual PMC sites (64-bit/66 MHz PCI-X, backward compatible to 5 V, 33 MHz PCI), up to 2 GB CompactFlash option, two high performance serial ports, and three 10/100/1000 Ethernet ports
      • High Performance IBM 750FX or 750GX PowerPC up to 1.0 GHz
      • 6U single slot SBC with up to 2 GB of DDR 400 SDRAM with ECC
    • VMICPCI-7761
      A single-slot, low-voltage Pentium III processor-bsed single board computer (+)

      Features:

      16717.jpg
      • Pentium III processors at 800 or 933 MHz
      • Up to 1 Gbytes of PC133 registered SDRAM with ECC
      • Supports CompactPCI hot swap specification
    • CP934
      A CompactPCI, managed Ethernet switch (+)

      Features:

      11093.jpg
      • Layer 2/3/4 switching
      • Carrier grade, designed to meet NEBS requirements
      • Single-slot, 6U
    • CP920
      6U single slot, CompactPCI carrier-grade switch designed for NEBS compliance (+)

      Features:

      19048.jpg
      • Full managed solution with Layer 2/3/4 switching at full wire speed
      • Telnet – accessible via any switch port and console serial interface
      • QoS on Layers 2/3/4 and 802.1p tag
    • CP944
      A Layer 2, non-blocking, full wire speed, CompactPCI Ethernet switch with Configuration Management Control (CMC) (+)

      Features:

      11085.jpg
      • Provides an economical solution for high availability PICMG 2.16 systems
      • Carrier grade, designed for NEBS compliance
      • 24 ports of 10/100 Mbit Ethernet to the rear I/O and optionally 2 x 1 Gigabit Ethernet fiber uplinks to the front or rear
    • CT8
      6U CompactPCI CPU single board computer (+)

      Features:

      12104.jpg
      • Ultra Low Voltage Intel Pentium®III Processor
      • 512k, up to 933 MHz
      • Up to 2 GB SDRAM with ECC
    • CT9-cPCI 6U SBC
      A 6U CompactPCI all-in-one CPU board (+)

      Features:

      20501.jpg
      • Integrated low power Intel Pentium M Processor 600 MHz to 1.6 GHz
      • Dual Gigabit Ethernet channels, 10/100/1000BaseT, front or rear optional
      • Supports full hot swap
    • CP723
      A 6U, CompactPCI blade server (+)

      Features:

      14883.jpg
      • Dual MIPS processors at up to 1 GHz (2000 MIPS per CPU core)
      • PICMG 2.16 compliant
      • System or non-system controller slot
    • CT9
      6U CompactPCI all-in-one CPU (+)

      Features:

      18532.jpg
      • PICMG 2.16 server blade
      • Intel Pentium M Processor
      • 600 MHz to 1.8 GHz
    • HDTBlade
      A high-density CompactPCI T1/E1 blade for edge and enterprise-level communications systems (+)

      Features:

      17450.jpg
      • Designed for applications requiring high-performance monitoring of multiple T1/E1 ports
      • 32 T1/E1 ports supporting 1024 HDLC channels
      • 6U CompactPCI board compliant to PICMG 2.16 R1.0
    • CP721TX
      A 6U, CompactPCI blade server (+)

      Features:

      • AMCCPowerPC 440GX CPU at 500 MHz
      • PICMG 2.16 compliant
      • System or non-system controller slot
    • CP924
      A CompactPCI Ethernet switch (+)

      Features:

      11077.jpg
      • Single-slot, 6U CompactPCI board
      • Hot swap capable
      • Carrier grade, designed for NEBS compliance
  • EUROTECH  (3)
    • AdRC-EXP1
      The AdRC-EXP1 is a hybrid CompactPCI Express/CompactPCI sub rack that allows mixing a CompactPCI Express CPU board with CompactPCI and CompactPCI Express peripheral boards in a seamless way (+)

      Features:

      44194.jpg
      • The AdRC-EXP1 allows combinations with up to three CompactPCI Express-compatible peripheral boards (Type 2) and up to six CompactPCI-compatible peripheral boards
      • When CompactPCI and CompactPCI Express boards are mixed, the optional A3EXP1565 bridge board must be installed
      • PICMG EXP.0 R1.0,PICMG 2.0 R3.0 CompactPCI
    • CPU-7635
      PICMG 2.16, R1.0 compliant (Packet Switching Backplane specification) (+)

      Features:

      • Hot swap PICMG 2.1, R2.0 compatible
      • Two PMC slots PICMG 2.3, R1.0 compliant
      • FC-PGA370 Celeron/Pentium III CPU
    • A6pci8026
      CompactPCI bus-compatible 6U CPU board (+)

      Features:

      43403.jpg
      • Equipped with Intel EP80579 Tolapai processor @ 1.2 GHz
      • DDR2-533 SDRAM SO-RDIMM up to 2 GB
      • ECC support
  • Adax, Inc.  (1)
    • SDCII-PMC
      Enhanced performance of SCTP for M3UA, M2UA, and M2PA-based applications (+)

      Features:

      22193.jpg
      • SCTP checksum assist, SCTP heartbeat assist
      • IPsec security enhancement
      • Up to 128 SIGTRAN Signaling Endpoints
  • Xembedded, LLC  (2)
    • XCPC-9100 CompactPCI carrier board
      A full hot swap capable mezzanine carrier board (+)

      Features:

      33477.jpg
      • 6U CompactPCI carrier board with sites for two PMC modules
      • PMC sites support PrPMC modes, one is Monarch and both can be Non-Monarch
      • 64-bit, 33/66 MHz, up to 512 MBps operation
    • XCPC-9100
      CompactPCI processor PMC 6U carrier module with 8-port Gigabit Ethernet Switch (+)

      Features:

      39166.jpg
      • PMC sites support PrPMC modes for Monarch and both can be Non-Monarch
      • On-board 8-port 10/100/1000Mbps Ethernet switch for support of PICMG 2.1 6
      • Rear Ethernet ports from PMC modules is routed to onboard switch and available out the rear and front ports
  • Artesyn Embedded Technologies  (10)
    • CPCI7203 PICMG 2.30
      The Emerson Network Power CPCI7203 3U form factor SBC features the Intel Core i7 integrated dual-core processor for use in high performance, space-constrained applications (+)

      Features:

      45777.jpg
      • On-board memory includes up to 4GB DDR3 and 256KB non-volatile Ferroelectric Random Access Memory (F-RAM)
      • F-RAM does not require batteries or periodic refreshes and offers many more read/write cycles and faster performance than flash memory, which benefits critical non-volatile data storage, data logs and dynamic program updates
      • The Trusted Platform Module (TPM) enhances data security and encryption capabilities
    • CPX8216 CompactPCI Configurable Systems
      A CompactPCI system designed for critical telecom infrastructure applications that need to meet 99.999% availability (+)

      Features:

      9165.jpg
      • Dual 8-slot CompactPCI passive backplane
      • PowerPC 750 system controller CPU option
      • Hot swappable CPU and I/O boards
    • CPCI7200 CompactPCI dual core processor board
      The CPCI7200 SBC offers high speed, server-class performance for advanced telecom and control plane applications (+)

      Features:

      36476.jpg
      • 1.06 or 1.5 GHz Intel Core2 Duo processor
      • 533 or 667 MHz front side bus
      • Intel E7520 + 6300ESB dual channel 3.2 GBps memory controller
    • CPCI7200 Board
      1.06 or 1.5 GHz Intel Core2 Duo processor (+)

      Features:

      • 533 or 667 MHz front side bus
      • Intel E7520 + 6300ESB dual channel 3.2 GBps memory controller
      • 2 GB ECC-protected DDR2-400
    • CPCI-7147 Processor Board
      CompactPCI 2.16 processor board (+)

      Features:

      23663.jpg
      • 1.1 GHz Intel Pentium M processor
      • 400 MHz frontside bus
      • Intel 855GME 1.6 GBps memory controller
    • CPCI-7145 Processor Board
      High performance CompactPCI processor board (+)

      Features:

      32568.jpg
      • 1.8 and 1.6 GHz Intel Pentium M processor
      • 400 MHz front-side bus
      • Intel E7501 dual-channel, 3.2 Gbps memory controller
    • CPCI-6190 Processor Board
      A universal-mode single-board computer (+)

      Features:

      32570.jpg
      • PowerPC 750GX processor with core frequency of 733 MHz or 1 GHz/1 MB L2 cache
      • Discovery GT-64260 system controller – five decoupled buses for concurrent processor/PCI peripheral device access to main memory
      • Sentinel universal-mode PCI-to-PCI bridge enables SBCs to switch between system- and peripheral-slot functionality
    • CompactPCI Processor Blades
      Intel architecture and PowerPC processor blades optimized for performance, power, and features (+)

      Features:

      20496.jpg
      • Universal mode system- or peripheral-slot functionality
      • IPMI system management support (PICMG 2.9)
      • CompactPCI Packet Switching Backplane compliant (PICMG 2.16)
    • CPCI7203 3U Board
      The Emerson CPCI7203 SBC uses the Intel Core i7 integrated dual-core processor in the 3U form factor for high performance in space-constrained applications (+)

      Features:

      46214.jpg
      • Intel Core i7 integrated dual-core integrated processor (1.06 GHz ULV or 2.0 GHz LV)
      • 1GB, 2GB or 4GB ECC-protected DDR3-800/1066 (soldered)
      • Mobile Intel 5 Series chipset: Ibex Peak-M PCH
    • CPCI6200 SBC
      The CPCI6200 SBC from Emerson Network Power offers high-speed bandwidth and server-class performance for compute intensive and control plane applications (+)

      Features:

      41682.jpg
      • 1.3 or 1.5 GHz Freescale MPC8572 dual core integrated processor
      • Integrated north bridge in the processor (no frontside bus)
      • 2 GB or 4 GB ECC-protected DDR3-800
  • N.A.T. GmbH  (5)
    • NVTP1001
      Intelligent carrier for PCI Mezzanine Cards (PMC) (+)

      Features:

      20300.jpg
      • Motorola MPC8280 PowerQUICC II at 333 MHz or 450 MHz
      • PCI interface and compliance: Intel 21555, 64 bit/ 66 MHz
      • Hot swappable, PCI Rev. 2.2
    • NcPCI-PMC
      PCI interface and compliance: Intel i21555 PCI-to-PCI bridge (66 MHz, 64-bit ), PCI Rev. 2.2 (+)

      Features:

      21630.jpg
      • H.110 bus: Agere T8110 TSI, H.110 on CompactPCI J4 connector, SCbus on PMC P14 connector
      • PMC slots: two 64-bit/66 MHz PCI Rev.2.2 IEEE P1386.1/Draft 2.4a compliant PMC slots on the PCI internal bus, I/O P14 connector used as SCSA bus connected to the T8110 TSI H.110 device
      • Full hot swap capability
    • NcPCI-EXT64
      CompactPCI interface (+)

      Features:

      21651.jpg
      • 33-bit/66 MHz, 64-bit
      • Power consumption: current drawn from +3.3 V, +5 V, +12 V, -12 V, V(I/O): less than 10 mA each
      • +3.3 V, +5 V, V(I/O), and GND connected to separate power planes
    • NPCI-CPCI
      PCI interface (+)

      Features:

      21734.jpg
      • 33/66 MHz, 64-bit, nonactive
      • CompactPCI interface
      • 33/66 MHz, 64-bit, nonactive
    • NAMC-8560-xE1/T1/J1
      The NAMC-8560-xE1/T1/J1 is targeted at telecom applications with extensive need for a high aggregation of multiple E1/T1/J1 interfaces combined with access to switched networks based on high-bandwidth Ethernet (+)

      Features:

      29899.jpg
      • PCIe interface and compliance: Four lanes PICMG AMC.1 R1.0
      • IPMI and compliance: PICMG AMC.0 R1.0, PICMG 2.9 R1.0
      • I-TDM and compliance: GbE at common options region, PICMG SFP.1 R1.0
  • Electronic Solutions  (12)
    • CompactPCI/PSB backplane
      An 8-, 15-, or 21-slot backplane designed to meet the CompactPCI 2.16 Packet Switching Backplane (cPSB) specification (+)

      Features:

      10881.jpg
      • H.110 support consisting of two power slots, a right-hand processor slot, 12 node board slots, and two fabric board slots
      • 9U chassis fits within the standard 19"-rack mechanics
      • Optional ability to bridge two CompactPCI segments
    • CompactPCI/cPSB EtherPlane
      A series of CompactPCI packet switched backplanes (+)

      Features:

      11084.jpg
      • Up to 21 slots in a 19" rack or more slots for 23" racks (up to 24 node slots)
      • Compliance with PICMG 2.16 and PICMG 2.0 Rev. 3.0
      • 64-bit datawidth
    • Zephyr Chassis
      Off-the-shelf, 1U and 2U, low-profile CompactPCI chassis (+)

      Features:

      • 2U has removable fan tray with side-to-side airflow path in a push configuration Fan tray carries three fans and an optional fan monitor with a status LED
      • Total airflow of 41 cfm
      • Chassis fully compliant with IEEE 1101.10/11 specifications with horizontal mounting for 6U x 160 mm CompactPCI cards in the front and 6U x 80 mm I/O cards from the rear
    • Ventus
      A 21-slot, CompactPCI chassis (+)

      Features:

      13978.jpg
      • Backplane compliant with compliant with PICMG 2.0 Rev. 3.0, PICMG 2.16 packet-switching backplane architecture, PICMG 2.5 CTbus (H.110), and PICMG 2.9 system management routing
      • Features APW Electronic Solutions' StealthBridge Technology
      • APW Electronic Solutions Patented Hybrid serial-parallel fan cooling scheme with three hot-swappable fan trays provides high fault tolerant cooling
    • PICMG 2.16: cPCI EtherPlane Backplane
      Up to 21 slots in a 19” rack or more for 23” racks (up to 24 node slots) (+)

      Features:

      • Compliance to PICMG 2.16
      • Compliance to PICMG 2.0 rev. 3.0
      • Supports PICMG 2.1 rev. 2 for basic hot swap
    • cPCI Ventus Chassis
      12U chassis (+)

      Features:

      • 20.97" (H) x 17" (W) (19" rack mount) x 12" (D)
      • APW Electronic Solutions Patented Hybrid Serial-Parallel fan cooling scheme
      • PICMG 2.0 R.3.0 CompactPCI 21 slot backplane with
    • PICMG 2.16 Development Chassis
      Up to 21 slots in a 19" rack or more for 23" racks (up to 24 node slots) (+)

      Features:

      19711.jpg
      • Compliance to PICMG 2.16
      • Compliance to PICMG 2.0 rev. 3.0
      • 64 bit datawidth
    • CompactPCI 1U and 2U Zephyrs
      1.735" (H) x 17.0" (19" rackmount) x 11.75" (D) (+)

      Features:

      20445.jpg
      • Truly fits within the 1U rack aperture
      • 2 slots 6U CompactPCI
      • PICMG 2.0 R3.0 backplane
    • cPSB Vanguard Development Chassis
      A PICMG 2.16-compliant chassis (+)

      Features:

      11103.jpg
      • Features 15 slots of CompactPCI/cPSB with dual fabric slots with the rest of the slots as nodes
      • Optional configuration allows system slot to participate as a node slot
      • 9U chassis with dual pluggable power supplies
    • STEALTHBridge
      APW Electronic Solutions' Patented bridging concept for CompactPCI applications, allows backplanes to be fully populated with CompactPCI plug-in boards and RTM boards beyond the 8 slot limitation (+)

      Features:

      9703.jpg
      • Up to 21 cPCI boards in a 19" rack application or 26 slots in a 23" rack
      • Available backplanes include 15 and 21 contiguous slots with slot positions lost to bridging function, Features PICMG 2.0 rel. 3.0-compliant
      • 64-bit datawidth, H.110 bus option with and telecom power connectors, provision for dual hot swappable power supplies, 6U form factor
    • CompactPCI CT backplane
      A Computer Telephony (CT) backplane (+)

      Features:

      • Fully compliant to PICMG and ECTF CT specifications
      • 6U form factor
      • P3 user definable I/O
    • AP-7543
      Designed specifically for Computer Telephony (CT) applications (+)

      Features:

      • Fully compliant to the PIC Industrial Computer Manufacturers Group (PICMG) Computer Telephony specifications, and has provisions to support basic hot swap of CT and peripheral boards
      • For use in high end, fault tolerant system platforms in the CT industry
      • Backplanes are also fully compliant to Enterprise Computer Telephony Forum (ECTF) H.110 specifications, the PICMG core, and CompactPCI CT specifications to ensure multi-vendor interoperability across a wide range of applications [...]
  • ACT/Technico  (6)
    • PICMG 2.16 Development Platform
      A CompactPCI packet switching backplane (PICMG 2.16) development platform (+)

      Features:

      • Compact, portable chassis
      • 8-slot backplane provides a mix of PICMG 2.16 node slots and two standard CompactPCI slots
      • Floppy drive, hard disk, and CD-ROM drive
    • Ethernet Switches
      Ethernet switches that provide up to 24 ports 10/100 (Fast) or 10/100/1000 (GbE) (+)

      Features:

      30415.jpg
      • Solutions based on VMEbus, VITA 31.1, PICMG 2.16 (cPSB), and CompactPCI platforms
      • Extended temperature and conduction-cooled versions for rugged environments
      • Configurable, fully managed (Layer 3), wirespeed, and unmanaged versions
    • Polaris System Chassis
      A 4U, CompactPCI system chassis (+)

      Features:

      • Six standard or PICMG 2.16 CompactPCI slots
      • Dual redundant, N+1, hot-swap compliant power supplies
      • Dual hot-swap-compliant fan modules with front-to-rear air flow
    • RAIDStor Development Kit
      Contains everything needed to establish a complete Embedded Network Attached RAID solution with dual star topology in a PICMG 2.16 or VITA 31.1 enclosure (+)

      Features:

      20060.jpg
      • 19-inch rackmount chassis or tower with either PICMG 2.16 or VITA 31.1 backplane
      • Two RAIDStor 6200 storage blades, with up to 120 GB per blade
      • Two 10/100 or Gigabit Ethernet fabric switches
    • VITA 31.1 Development Chassis
      Ethernet fabric on VME/VITA 31.1 development chassis (+)

      Features:

      22087.jpg
      • Enables the use of Ethernet fabric switching technology in a VME64x environment by leveraging PICMG 2.16 technology via the J0 connector (VITA 31.1)
      • Suitable for implementing Ethernet fabrics in a VME64x environment without losing access to current investments
      • Provides two system and two node PICMG 2.16/VITA 31.1 slots, and 10 VME64x slots
    • RaidStor
      A 6U, single-slot, PICMG 2.16, network-attached storage blade (+)

      Features:

      15107.jpg
      • PICMG 2.16 packet switched backplane compatible
      • High-availability and hot-swap capable
      • Removable, 120 Gbyte per blade capacity
  • Kaparel Corporation  (15 of 16)
    • PS49xx Packet Switch Series
      A series of Compact Packet Switching Backplanes (cPSB) that support Switched Ethernet, as defined by the PICMG 2.16 specification (+)

      Features:

      10262.jpg
      • 7U x 84HP, PICMG 2.16 compliant
      • Offers high capacity CompactPCI, incorporating Packet-Switching architecture for developers of next-generation telecom networks
      • The Compact Packet Switching Backplane provides a way to design telephony and high availability systems that combine CompactPCI with Ethernet for high-speed systems
    • PS4800
      A 6U x 84HP CompactPCI StarFabric backplane (+)

      Features:

      • 16 card slots
      • Two 8-slot, 64-bit CompactPCI buses operating at 33 MHz PCI or 66 MHz PCI-X
      • Selectable V(I/O) (3.3V or 5V)
    • Backplanes
      CompactPCI backplanes designed to accommodate rear mount , low profile bridge modules (+)

      Features:

      41088.jpg
      • CPCI- PICMG 2.16 Ethernet Packet Switching Backplane specification
      • CPCI- PICMG 2.17 Star Fabric Specification
      • CPCI- CompactPCI H.110
    • CompactPCI Developer Chassis
      CompactPCI development platform (+)

      Features:

      19258.jpg
      • Designed for the hardware and software development of CompactPCI boards and systems
      • Prepared for horizontal installation of CompactPCI front boards eight-slot 6U x 160 mm boards, max 10-slot 6U x 160 mm boards
      • Eight-slot 6U x 80mm RTMs, max 10-Slot 6U x 80 mm RTMs
    • PS44xx Modular Series
      6.5U CompactPCI, 32/64-bit family of modular backplanes (+)

      Features:

      • H.110 support, three to eight-slot configurations for both PCI and H.110
      • 12/16/20/24/28/32HP
      • +5 V, 33 MHz PCI bus interface
    • PS14xx & PS14xxB Modular Series
      6U CompactPCI, 32/64-bit family of modular backplanes (+)

      Features:

      • Two to eight-slot configurations; left host positioning available; 12/16/20/24/28/32HP
      • The entire PS14xx series is designed to accept mechanical hot swap
      • Power distribution via ATX power connectors
    • 23000 Series
      A series of 3U PXI backplanes (+)

      Features:

      16945.jpg
      • PXI R2.0, PICMG 2.1 R1.0 Hot Swap Specification, and PICMG 2.8 draft specification compliant
      • One 64-bit CompactPCI bus and three to seven peripheral slots
      • Supports 32/64-bit, 33/66 MHz (66 MHz only in five or less slots)
    • 3U cPCI Rack-Mounted System
      Aluminium vented system, 358mm deep, for installation in 19” (486.2mm) rack, cabinets or cases (+)

      Features:

      19253.jpg
      • Accepts PICMG 2.0/2.1 CompactPCI 3.5U x 5-Slot Backplane
      • Prepared to accommodate CompactPCI boards and drives
      • Fully wired and tested
    • StarFabric Development Chassis
      PS6090 StarFabric Backplane Development Platform provides a PICMG 2.17 compliant system for the development of next-generation network systems (+)

      Features:

      14871.jpg
      • Includes a 6U PS4800 2.17 backplane
      • 9U chassis
      • Can be configured with power supplies and the StarGen SFS2100 StarFabric switch [...]
    • PS1200
      3U, 84HP power backplane; supports up to 10 hot swap Type M power supply modules and upwards of 1,500 W (+)

      Features:

      • Provides +5 V, +3.3 V, +12 V, -12 V, GND, and control signals to CompactPCI backplanes
      • Power input: three AC and two DC power taps
      • Power output: three additional AC taps for fans
    • PS6620
      A CompactPCI SCSI dual hard disk drive module (+)

      Features:

      11922.jpg
      • 6U, 8HP
      • Compliant with PICMG 2.1 hot-swap specification
      • Two Ultrastar 18.2 GB HDDs
    • PS66xx Series
      A 6U CompactPCI-SCSI hard disk drive board (+)

      Features:

      9435.jpg
      • Allows a SCSI hard disk drive to be added to any CompactPCI embedded system, without also requiring the addition of a sub-chassis
      • IBM Ultrastar hard drive with 18.4 GB of storage capacity, and an LSI 53C 1000 SCSI controller (PS6620 supports two hard disks)
      • 6U high, 8 HP wide, and 160 mm deep
    • PS1410B
      A 14-slot monolithic CompactPCI backplane (+)

      Features:

      • 6U x 84HP
      • Slots can be configured as one system slot and 13 peripherals by using Kaparel's PS1134 bridge, or as two separate segments for redundant systems
      • Accepts three 6U x 8HP, P47 (N+1 redundant) power supplies (Accepts six 3U x 8HP power supplies in 3U form factor)
    • PS4410B
      A 14-slot monolithic CompactPCI board (+)

      Features:

      • 6U x 84HP
      • The 14 slots can be configured as one system slot and 13 peripherals by using Kaparel's PS1134 bridge, or as two separate segments for redundant systems
      • Offers H.110 for telephony applications
    • Ripac MPS Electronic Packaging
      Systems for the configuration of industrial computers to VME, CompactPCI specifications (+)

      Features:

      • Fully assembled, pre-wired and tested, including backplane and power supply units
      • Individual ventilation concepts
      • Conforms to IEC 60 297-3 & -5 and IEEE 1101.1/10/11, as well as CompactPCI 2.0 (PICMG)
  • TEWS Technologies LLC  (6)
    • TCP260
      A 6U, CompactPCI, dual PMC carrier (+)

      Features:

      14952.jpg
      • Standard 6U, 32/64-bit CompactPCI module conforming to PICMG 2.0 R3.0
      • PCI 2.2-compliant interface
      • Two PMC sites conforming to PMC standard
    • TCP261
      Dual PMC carrier for 6U CompactPCI (J3/J4 I/O) (+)

      Features:

      21777.jpg
      • CompactPCI 6U, confirming to PICMG 2.0 R3.0
      • PCI 2.2 compliant interface, 33 MHz / 66 MHz, 32 bit / 64 bit
      • 3.3 V or 5 V (5 V default) PCI I/O signaling voltage, configured by resistor placement
    • TCP220
      4 slot IndustryPack CompactPCI Carrier (Back I/O); Standard 6U 32/64-bit CompactPCI module confirming to PICMG 2.0 R3.0 (+)

      Features:

      21776.jpg
      • 3.3 V and 5 V PCI I/O signaling voltage keying
      • PCI 2.2 compliant interface, 33 MHz, 32-bit
      • IP slots 4 single-sized or 2 double-sized, IP Interface according to IndustryPack specification ANSI/VITA4-1995
    • TCP270
      PMC carrier for 3U CompactPCI (+)

      Features:

      21778.jpg
      • Standard 3U 32-bit CompactPCI module confirming to PICMG 2.0 R3.0
      • PCI 2.2 compliant interface, 33 MHz, 32-bit
      • 5 V and 3.3 V PCI I/O signaling voltage
    • TCP872
      CompactPCI carrier for 2 CardBus / PC Card Cards; CompactPCI 3U, confirming to PICMG 2.0 R3.0 (+)

      Features:

      21784.jpg
      • PCI Rev. 2.2. compliant interface, 33 MHz / 32 bit PCI, 3.3 V and 5 V PCI sgnaling vltage
      • Texas Instruments PCI1520 PCI controller
      • PCI Card Interface: 16 bit PC Card electrical interface / 32 bit CardBus electrical interface
    • TCP862
      4 channel high speed Synch/Asynch serial interface (+)

      Features:

      21782.jpg
      • CompactPCI 3U 32 bit conforming to PICMG 2.0 R3.0
      • PEF20534 (Infineon) serial controller with Integrated PCI Interface
      • +3.3 V and +5 V PCI I/O signaling voltage
  • MEN Micro Elektronik GmbH  (11)
    • 3U Intel-based SBC
      MEN Micro Inc. has released the first 3U Intel-based single board computer (SBC) that conforms to the new PICMG 2.30 CompactPCI PlusIO standard (+)

      Features:

      42966.jpg
      • The new standard adds serial functions on the J2 rear I/O connector in CompactPCI systems for added flexibility and versatility as well as easier system upgrades
      • Available with a range of Intel processors, from the 2.26 GHz Core 2 Duo SP9300 to the 1.20 GHz Celeron M 722, and dissipating between 5.5 Watts and 25 Watts, the 32-bit/33-MHz SBC was especially developed for numerous low power embedded applications with high performance and reliability requirements
      • An integrated graphics controller on the Intel GS45 Express Chipset makes the F19P especially suited for applications needing not only high graphics performance, but also for monitoring or control as well as test and measurement
    • D5 - 6U CompactPCI® PowerPC® SBC
      PowerPC MPC8540/800 MHz (+)

      Features:

      • 1-slot CompactPCI 64-bit/66 MHz
      • System slot, peripheral slot, or standalone
      • Hot-swap and PICMG 2.16 support
    • 6U CompactPCI SBC
      A 6U CompactPCI single board computer (SBC) that combines Intel's multiport technology with a flexible mezzanine card extension and rugged design (+)

      Features:

      38227.jpg
      • Intel Core 2 Duo T7400 or L7400, Core Duo T2500, U2500 or L2400
      • PCI Express five x1 links
      • 4 HP system master or stand-alone
    • F4
      A 3U PowerPC-based CompactPCI board (+)

      Features:

      • PowerPC MPC8245 processor at 300 MHz
      • 1 Mbyte ultra-fast DPRAM
      • 256 Mbytes DRAM
    • D7 Server Blade
      6U CompactPCI SBC equipped with one or two Intel Xeon dual core processors, providing up to four CPU cores with a frequency of 1.66 GHz, and the Intel E7520 server chipset (+)

      Features:

      33290.jpg
      • Intel dual core Xeon 1.66 GHz
      • 2 or 4 CPU cores on-board
      • 4/8HP CompactPCI system or peripheral slot
    • F19P - 3U CompactPCI® PlusIO Intel® Core™ 2 Duo SBC
      Intel® Core™2 Duo SP9300, 2.26 GHz (+)

      Features:

      42452.jpg
      • Dual-core 64-bit processor
      • 4HP system master or stand-alone
      • 32-bit CompactPCI® and PICMG 2.30 PlusIO
    • Pack of Cards
      The PICMG specification CPCI-S.0 CompactPCI® Serial as a successor of the parallel CompactPCI paves the way to serial point-to-point connections at the backplane (+)

      Features:

      47526.jpg
      • As a manufacturer of Embedded hardware, MEN Mikro Elektronik already offers the first CPU board with an Intel® i7 processor as well as a range of peripheral boards with different I/O functions for building up complete systems [...]
    • G303 3U CompactPCI Serial GbE Switch
      The G303 is an unmanaged 3U Ethernet switch implemented as a CompactPCI® Serial board. It occupies one peripheral slot, using a 4 HP front panel with 3 Gigabit Ethernet ports on RJ45 or M12 connectors. The G303 either features three Ethernet ports on the front and up to 13 Ethernet ports on the rear or alternatively all 16 Ethernet ports on the rear, which is the ideal solution for conduction cooling. (+)

      Features:

      223646525961999702.jpg
      • Up to 16 Gigabit Ethernet ports on rear I/O or 3 ports on front and up to 13 ports on rear
      • LEDs for front port and board states
      • -40 to +85°C with qualified components
    • F50P
      3U PowerPC based CompactPCI SBC for harsh embedded applications (+)

      Features:

      41542.jpg
      • 32-bit CompactPCI and PICMG 2.30 PlusIO
      • MPC8548 (or MPC8543), up to 1.5 GHz
      • Up to 2 GB (ECC) DDR2 SDRAM
    • G302 CompactPCI Serial GbE Switch
      The G302 is a managed 3U Ethernet switch implemented as a CompactPCI® Serial board. It occupies one system slot or one peripheral slot, using a 4 HP front panel with 3 Gigabit Ethernet ports on RJ45 or M12 connectors and one service interface via M12. The G302 either features three Ethernet ports on the front and up to 13 Ethernet ports on the rear or alternatively all 16 Ethernet ports on the rear, which is the ideal solution for conduction cooling. (+)

      Features:

      223646336961680232.jpg
      • Up to 16 Gigabit Ethernet ports on rear I/O or 3 ports on front and up to 13 ports on rear
      • Configuration via web interface, Telnet CLI, SNMP ver. 3 or external dongle
      • Service interface via M12
    • G301
      Rugged 3U Ethernet Switch that features four Gigabit Ethernet ports via RJ45 or M12 connectors in the front, complying with the PICMG CompactPCI Serial standard (+)

      Features:

      47525.jpg
      • Optional fifth Gigabit Ethernet port
      • Very reliable in communication systems and supports full and half duplex
      • Layer-2 switching [...]
  • ELMA Electronic  (15 of 48)
    • StarFabric Adapter Card
      A PICMG 2.17-compliant StarFabric adapter card (+)

      Features:

      15032.jpg
      • 6U high by 180 mm deep
      • Converts the PCI bus to StarFabric links, acting as a PCI-to-StarFabric bridge
      • Standard CompactPCI cards can be plugged into the StarFabric adapter card, which is plugged into a PICMG 2.17-compliant backplane
    • StarFabric Backplanes
      Two PICMG 2.17-compliant StarFabric backplanes (+)

      Features:

      • Available in 4-slot and 6-slot configurations
      • The 4-slot backplane has one StarFabric switch card slot and three node slots with CompactPCI
      • The 6-slot backplane has one StarFabric switch card slot, two node slots with CompactPCI and H.110, and three nodes slots with CompactPCI only (one slot can be converted to a system slot)
    • PICMG 2.16 Development Backplane
      A PICMG 2.16 CompactPCI packet switching backplane (+)

      Features:

      11931.jpg
      • Allows testing and prototyping of various implementations of the CompactPCI bus, H.110, and cPSB links
      • 17 slots
      • Slots 1-4 allow testing of the CompactPCI bus (64-bit) and 10/100-Mbytes/sec links
    • StarFabric Series
      A line of StarFabric backplanes compliant to PICMG 2.17 (+)

      Features:

      • Offered in various configurations
      • Available as a 17-slot development backplane with 10 basic node slots, dual fabric slots, two node slots with H.110, a StarFabric system slot with CompactPCI and H.110, and two standard CompactPCI with H.110 slots
      • StarFabric links are redundant between the fabric slots and the StarFabric system slot
    • 69-SF617-0157
      A PICMG 2.17-compliant backplane (+)

      Features:

      • [...]
    • PICMG 2.17 Development System
      A PICMG 2.17 development platform (+)

      Features:

      12190.jpg
      • 9U, 84HP
      • Allows the user to test the implementation of the StarFabric switched fabric across a 17-slot PICMG 2.17-compliant backplane along with standard cards using the CompactPCI bus and/or the H.110 bus
      • Allows high-availability (HA) testing
    • 2-Slot cPCI
      2-slot CompactPCI backplane (+)

      Features:

      32313.jpg
      • Conforms to PICMG basic specification 2.0 R3.0
      • PICMG Hot Swap specification 2.1 R1.0
      • Versions conforming to PICMG 2.16 are available
    • 15C04LK948N3VC3X
      CompactPCI Express chassis comes in a 19" rack-mount or desktop style with the cards horizontally mounted (+)

      Features:

      31462.jpg
      • 4-slot 3U CompactPCI Express backplane
      • Bottom to top (3 x 75 CFM) cooling, and advanced EMC shielding to meet CE, FCC, and NEBS
      • 90 - 264 VAC or 48 VDC PSU inputs and fixed mount, plug in, or N+1 options
    • cPCI: PICMG 2.16 Backplane
      6U height (+)

      Features:

      • Four, six, and eight slot sizes standard
      • Ethernet and CompactPCI compatible
      • 10-layer board
    • Low Profile CompactPCI Backplanes
      Conforms to PICMG basic specification 2.0 R3.0 (+)

      Features:

      20065.jpg
      • PICMG Hot Swap specification 2.1 R1.0
      • Versions conforming to PICMG 2.16 are available
      • Versions conforming to PICMG 2.5 R1.0 for Computer Telephony are available
    • PXI Backplane
      3U, 8-slot PXI Backplane (+)

      Features:

      • Compliant to PICMG 2.0 R3.0 CPCI Core Specification and PICMG PXI SA R2.1
      • Connector for status signals "FCON" and Fastons for supplying HDD and fans
      • PICMG 2.1 R2.0 Hot Swap Specification and PICMG 2.9 R1.0 System Management Specification
    • cPSB HA Backplane
      An 8-slot PICMG 2.16-compliant packet-switching backplane for systems requiring High Availability (HA) (+)

      Features:

      17053.jpg
      • Fits 4U horizontal chassis
      • Includes connection to shelf managers specifically geared for HA applications
      • Pins for the Intelligent Platform Management Bus (IPMB) incorporated into a 20-pin header with other signal functions, usable for standard shelf managers or Elma IPM Sentry Shelf Manager
    • 16-slot cPSB
      A 16-slot CompactPCI Packet-Switching Backplane (cPSB) with two 47-pin connectors (+)

      Features:

      • Based on the PICMG 2.16 specification
      • Moves data off the shared bus and onto an embedded switched Ethernet network fabric accessed through the J3 connector
      • Up to 20 link slots can be supported by using a single fabric slot in a 19-inch CompactPCI chassis
    • 8-Slot Type 32 cPCI Chassis
      An 8-slot CompactPCI portable tower with PICMG 2.16 backplane options (+)

      Features:

      16518.jpg
      • 17” (H) x 10.5” (W)
      • Two 5.25” HH devices
      • 350W plug-in power supply with an option for dual redundancy
    • PICMG 2.16 cPCI chassis
      A 9U CompactPCI development chassis (+)

      Features:

      • Advanced cooling system consists of individual fan modules for replacement of one fan without taking the entire cooling system offline
      • Dual 350W, plug-in, N+1 redundant power supplies
      • 16-slot PICMG 2.16 backplane
  • Avnet Electronics Marketing  (8)
    • ComputeNode4U cPSB
      A PICMG 2.16-based, carrier-grade, CompactPCI chassis (+)

      Features:

      • Eight slots total; one slot for dual 3U Ethernet switches, one system slot, and 6 I/O slots, all with corresponding rear-transition modules
      • PICMG 2.16 compact packet switched backplane architecture
      • Redundant, hot-swappable, 10/100Base-T Layer 2 switches in one 6U CompactPCI slot
    • CP2040/2140
      A CompactPCI packet switching backplane rear transition module (+)

      Features:

      • Standard CompactPCI 6U form factor
      • Enables PICMG 2.16 Ethernet for Sun Microsystem's Netra CP2040 or CP2140 boards
      • Switches between standard and cPSB configurations
    • CP86-N2 (Intel Core i7 cPCI x86 Blade)
      PDSi’s Intel-based CompactPCI x86 Processor Blade (CP86-N2) provides a robust, high-performance general purpose compute platform for use in CompactPCI PICMG 2.16 systems (+)

      Features:

      • Intel-based CompactPCI blade server utilizing Intel’s 22nm processor technology
      • Intel Core i7-3612QE, i7-3615QE
      • Up to 16GB, ECC, Unbuffered, DDR3,1066 / 1333 MHz Memory
    • CP2X60/2X80
      A CompactPCI packet switching backplane rear transition module (+)

      Features:

      • Standard CompactPCI 6U form factor
      • Enables PICMG 2.16 Ethernet for Sun Microsystem's Netra CP2060/2080 and CP2160/2180 boards
      • Switches between standard and cPSB configurations
    • ComputeNode
      Full family of 1U through 4U chassis, CompactPCI, and cPSB (PICMG 2.16) (+)

      Features:

      15569.jpg
      • Proven NEBS Level 3 compliant designs for high speed, high availability telecom and networking applications
      • Built-in Alert!Node alarm card for out-of-band chassis management
      • Redundant, hot-swappable AC or DC Power Supplies with Filters and Dual Feed option
    • ComputeNode3U cPSB
      A six-slot, 3U, PICMG 2.16-based, carrier-grade, CompactPCI system (+)

      Features:

      • One slot for dual 3U Ethernet switches, one system slot, and four I/O slots, all with corresponding rear-transition modules
      • Configurable with Sun, Intel, PowerPC, and custom-designed processors
      • Standard 3.5” SCSI hard drive located above the power supplies
    • Alert!Node
      A smart alarm and system manger (+)

      Features:

      • Serves as the shelf management controller for the GNP Node2U, Node3U, or Node4U system
      • Hot swappable and accessible through the rear of the chassis
      • Incorporates an IPMI-compliant baseboard management controller to monitor PICMG 2.9-compliant CompactPCI devices and the power and cooling subsystems
    • ATCA Carrier Cards
      AdvancedTCA carrier cards for integrating CompactPCI and Compact Packet-Switching Backplane (cPSB) cards into an AdvancedTCA environment (+)

      Features:

      • Entry-level AdvancedTCA Base Interface carrier card provides interconnection to the PICMG 3.0-compliant data transport section, 10/100/1000Base-Tx fabric data interconnectivity in a dual star configuration, and an onboard IPMI controller
      • AdvancedTCA Full Mesh carrier card provides complete fabric interface connectivity for any CompactPCI boards,
      • Onboard Gigabit Ethernet switch with full mesh connectivity and alternate topologies including dual star, dual dual star, and limited meshes
  • Agilent-Acqiris  (1)
    • PC502
      PC501GHz Pentium III processor: - 32 Kbytes L1 cache - 256 Kbytes L2 cache - no CPU fan needed (+)

      Features:

      • Single slot
      • Up to 1 Gbyte of Synchronous ECC DRAM
      • High performance EIDE interfaces with optional on-board disk drive (in a single slot)
  • Schroff Pentair  (4)
    • CompactPCI 2.16
      A telecom system compliant with PICMG 2.16 (+)

      Features:

      • Incorporates backplane, power supply, cooling, and provisions for monitoring into a single package that provides theoretical data transfer rates of up to 50 Gbits/sec
      • Backplane also supports StarFabric (PICMG 2.17) and serial mesh (PICMG 2.20) applications
      • Based on a 19”, 10U-high subrack with a Schroff CompactPCI packet switching backplane
    • PXI Backplanes
      A series of PXI backplanes (+)

      Features:

      • Conforms with: PXI specification Rev. 2.0, PICMG 2.0 Rev. 3.0, PICMG 2.1 Rev. 2.0, PICMG 2.8, and PICMG 2.9 Rev. 1.0
      • Clock switch over/clock generation on the backplane
      • 64-bit bus width, system slot on the left
    • CompactPCI backplanes with bridging
      A series of CompactPCI backplanes that provide bridging capabilities (+)

      Features:

      • Standard rear I/O on both 3U and 6U versions
      • Suitable for 19” applications requiring high availability in a compact design
      • I/O routed to the P2 connector
    • Express Programs
      Conform to PICMG specifications (+)

      Features:

      312702470861240973.jpg
      • ATCA, uTCA, CompactPCI standards
      • Standard and customized solutions available
      • Local and global design and product support
  • PT  (15 of 17)
    • CPC300 Advanced PTMC Carrier Blade
      An advanced PTMC carrier blade that allows systems integrators to create a custom blade by populating it with PTMC modules that meet specific application requirements (+)

      Features:

      21981.jpg
      • Providing two PTMC sites that comply with the PICMG 2.15 standard, the CPC300 can be used with a wide array of PTMC modules available today, ranging from telecom I/O cards, DSP cards, or packet processing modules.
      • PICMG 2.16 or standard PCI bus operation
      • 667 MHz PowerPC with L1/L2 cache
    • AMP5095 7U PICMG 2.16 Platform
      Part of the company's Advanced Managed Platform offering (+)

      Features:

      19609.jpg
      • 7U, 19-in, CompactPCI PICMG 2.16 platform
      • Ten hot-swappable, 6U, standards-based slots
      • Eight payload slots
    • CPC5910
      The CPC5910 is a high-performance, high availability SATA storage expansion blade for CompactPCI® PICMG® 2.16 systems supporting one 800 GB of storage (+)

      Features:

      29809.jpg
      • Each blade features two 3.5" enterprise-class SATA hard drives with board- and drive-level hot-swap for complete flexibility, high reliability, and high storage capacity
      • The CPC5910 connects to the high-performance CPC5564 64-bit Single Board Computer or the CPC5900 IP Storage Blade to provide additional storage capacity
      • High-density 6U x 2-slot storage expansion blade
    • CPC5564 SBC
      The CPC5564 is the first 64-bit single slot CompactPCI single board computer designed for high-performance embedded applications, featuring the AMD Opteron 940 single core 2.2 GHz or dual core 1.8 GHz processor (+)

      Features:

      30352.jpg
      • 64-bit single or dual core processor support
      • Single slot high density compute blade
      • High-performance computing solution for PICMG® 2.16 systems
    • CPC5505 PICMG 2.16 SBC
      Single slot 6U single board computer (+)

      Features:

      20495.jpg
      • 1.8 GHz Intel Pentium M processor
      • Intel 6300ESB I/O Controller Hub
      • 400 MHz front side bus
    • CPC6600 24-port PICMG 10/100/1000 TX Ethernet Switch
      A 6U, CompactPCI, Gigabit Ethernet switch (+)

      Features:

      15082.jpg
      • 24 10/100/1000BASE-T ports
      • Wire-speed layer2/layer3 routing
      • Dual 44-Gbps switching speed
    • CPC5900
      The CPC5900 is a high availability NASor SANstorage blade solution for CompactPCI, PICMG 2.16 systems supporting 800 GB of storage (+)

      Features:

      33606.jpg
      • Each blade features two 3.5" enterprise SATA hard drives with both board-level and drive-level hot-swap for complete flexibility, high reliability, and high storage capacity
      • The onboard high-performance PowerPC processor operates on Performance Technologies' NexusWare CGL 4.0 registered/ POSIX compliant Linux development environment
      • Block Disk I/O is supported over iSCSI for SAN applications and File I/O is supported using NFS and SAMBA for NAS applications
    • CPC396 Dual T3/H.110 TDM Circuit Switch
      Carrier-grade dual DS-3 communications interface for 6U CompactPCI systems (+)

      Features:

      36918.jpg
      • Motorola MPC8260 PowerQUICC II processor, integrated communications functionality managed by an MPC603e PowerPC core
      • PICMG 2.16-compliant (capable of operating in conventional CompactPCI chassis or packet switching backplane configurations)
      • Dual 10/100 Ethernet
    • AMP5088 12U Advanced Managed Platform™
      12U, 19-inch rack-mount enclosure (+)

      Features:

      14114.jpg
      • 21 hot-swappable, 6U, standards-based slots
      • 18 node slots
      • Two 10/100/1000 PICMG® 2.16 redundant fabric slots
    • CPC358 8-Port WAN Communications Adapter
      The CPC358 is an eight port serial communications processor designed to operate in CompactPCI® systems as a peripheral or in a PICMG® 2.16 chassis as a stand-alone communications system (+)

      Features:

      14828.jpg
      • It provides OEMs, integrators and end users with a high performance platform for use in server farms or datacom/telecom applications
      • Featuring the Motorola MPC8255 PowerQUICC II™ processor, the CPC358 can independently process protocols such as X.25, Frame Relay, LAPD and Radar Receiver in an Internet/WAN environment
      • In Telecom applications, the CPC358 will also support MTP-2 on all eight links
    • AMP5086 12U PICMG 2.16 Advanced Managed Platform
      Part of the company's Advanced Managed Platform offering (+)

      Features:

      18355.jpg
      • 12U, 19-Inch rack-mount enclosure 21 hot-swappable, 6U, standards-based slots
      • 18 node slots
      • No CompactPCI bus
    • CPC6303 250W Hot-Swap AC Power Supply
      A 250W, hot-swap AC power supply (+)

      Features:

      14620.jpg
      • Hot-swap N+1 load sharing
      • Combined total of 40A for the +5V and +3.3V outputs (no minimum load restrictions)
      • Protection features include output overvoltage protection, output overcurrent protection, and overtemperature protection
    • AMP5085 12U Advanced Managed Platform
      A 12U, 19”, PICMG® 2.16 platform (+)

      Features:

      14115.jpg
      • 21 slots; 18 node slots, two 10/100/1000 PICMG 2.16 redundant fabric slots, and two 3U redundant PICMG 2.9 IPMI-based ISM slots
      • Four hot-swappable, redundant host slots for active/active or active/standby control-plane operation
      • 12 64-bit peripheral slots with H.110 telephony bus and rear-panel I/O
    • Advanced Managed Platforms
      PICMG 2.16 application-ready platforms encompass broad range of award-winning switches, single board computers, I/O cards, and enabling software (+)

      Features:

      33605.jpg
      • Intelligent Shelf Management
      • Integrated NexusWare CGL 4.0 Registered and POSIX-compliant Linux
      • Single and dual core SBCs
    • CompactPCI® Blades
      Widest breadth of PICMG 2.16-compatible blade elements in the industry (+)

      Features:

      36947.jpg
      • Single- or Dual-core Single Board Computers and Accessories
      • 10/100/1000 Ethernet Switches supporting IPv6 switching and routing
      • T1/E1/J1 and Serial Communication, Voice-Processing solutions (VoIP), storage blades, and more
  • Rastergraf, Inc.  (1)
    • PMB-C
      6U CompactPCI dual PMC (+)

      Features:

      • PMC to CompactPCI adapter
      • 6U CompactPCI form factor
      • 32- and 64-bit CompactPCI Bus compatibility
  • Alligator Designs  (1)
    • VME/cPCI Backplanes
      Manufacturer of VME32/VME64x/VXS/VPX REDI and CompactPCI standard or custom range of backplanes suitable for deployment of open system based real-time mission-critical applications (+)

      Features:

      39230.jpg
      • As per IEEE 1014-1987 and ANSI/VITA 1-1994 VITA standards
      • IEEE1101.x Mechanical standards: 02 to 21 VME slots
      • -40 ºC to +85 ºC
  • Mapsuka  (14)
    • cPCI & PMC bezels
      A series of CompactPCI and PMC products, including chassis from 1U to 9U, CompactPCI front panels, PMC bezels, gasket, subrack extrusions, card guides, fan tray, and device holder (+)

      Features:

      • Aluminum chassis, from 1U to 9U, that 1) ensure high resistance to rust/ corrosion, 2) reduce unit weight (1/3 lighter than steel chassis), 3) increase EMI/ EMC protection
      • Chassis are tool-built construction, not NCT, to ensure precision and stability
      • 3U / 6U / 9U CompactPCI front panels and filler panels
    • cPCI chassis, 2U
      EMC integrated system in 19" rack mount (+)

      Features:

      • DIM: 2U
      • 84HP
      • 283 mm
    • 2U-4slot platform
      2U CompactPCI platform (+)

      Features:

      • Aluminum enclosure: 2U (H) x 84T (W) x 283 mm (D)
      • Front cage: 4-slot, 6U x 160 mm; Rear I/O: 4-slot, 6U x 80 mm
      • 250 W ATX or 250 W CompactPCI power supply
    • 4U Horiz Platform
      4U 8-slot, horizontal type, CompactPCI platform; custom design is available (+)

      Features:

      • Aluminum enclosure: 4U (H) x 84T (W) x 283 mm (D); Front cage: 8-slot, 6U x 160 mm; Rear I/O: 8-slot, 6U x 80 mm
      • 400 W ATX or 250 W CompactPCI power supplies
      • Option: 1 x 3.5" HDD and 1 x slim CD-ROM device holders
    • 9U cPCI chassis
      EMC integrated system in 19" rack-mount (+)

      Features:

      • DIM: 9U
      • 84HP
      • 283 mm
    • cPCI chassis, 3U
      EMC integrated system in 19" rack-mount (+)

      Features:

      • DIM: 3U
      • 84HP
      • 283 mm
    • cPCI chassis, 7U
      EMC integrated system in 19" rack-mount (+)

      Features:

      • DIM: 7U
      • 84HP
      • 283 mm
    • 8U cPCI chassis
      EMC integrated system in 19" rack-mount (+)

      Features:

      • DIM: 8U
      • 84HP
      • 283 mm
    • cPCI chassis, 6U
      EMC integrated system in 19" rack-mount (+)

      Features:

      • DIM: 6U
      • 84HP
      • 283 mm
    • cPCI chassis, 4U
      EMC integrated system in 19" rack mount (+)

      Features:

      • DIM: 4U
      • 84HP
      • 283 mm
    • 4U cPCI horizontal platform
      19" alluminum alloy chassis, 4U (H) x 84T (W) x 283 mm (D) (+)

      Features:

      • Holds eight, 6U x 160 mm cards, horizontally oriented, front load, flush
      • Includes 8-slot CompactPCI backplane, per PICMG 2.0 R3.0 or PICMG 2.16
      • With rear I/O card cage, to accommodate eight, 6U x 80 mm plug in transition modules
    • PHT02-21610
      6U, 4/6/8 slots backplane (+)

      Features:

      • Conform to PICMG 2.16 R1.0
      • Support Hot Swap feature of PICMG 2.1 R2.0
      • CompactPCI Packet Switching Backplane (CompactPCI/PSB)
    • PICMG2.0R3.0 and 2.16 Backplanes
      3U/6U, 2/4/6/8/more slots Backplane (+)

      Features:

      • Conform to PICMG 2.0 R3.0 or PICMG 2.16
      • Support Hot Swap feature of PICMG 2.1 R2.0
      • VI/O are user selectable to a +5 V or +3.3 V
    • PICMG2.5R1.0 backplane
      6U, 4/6/8 slots backplane (+)

      Features:

      • Conform to PICMG 2.5 R1.0
      • Support Hot Swap feature of PICMG 2.1 R2.0
      • Time Division Multiplex (TDM) bus signal of the ECTF H110 (CT Bus)
  • Zephyr Engineering, Inc.  (3)
    • ZPCI.2400 Active Extender Board
      An active extender test fixture that provides access to both sides of a CompactPCI board and all PMC mezzanine slot signals while meeting all PICMG 2.0 R3.0 specifications (+)

      Features:

      9533.jpg
      • Onboard bridge maintains CompactPCI signal integrity
      • Onboard PMC mezzanine slot for PCI logic analyzer/exerciser
      • All CompactPCI and user I/O signals are individually isolatable
    • ZPCI.2466
      An active extender test fixture (+)

      Features:

      11273.jpg
      • Provides access to both sides of a CompactPCI board and all PMC mezzanine slot signals
      • Meets PICMG 2.0 revision 3.0 specifications
      • Onboard bridge maintains CompactPCI signal integrity at 66 MHz
    • amc7
      A 96 channel digital I/O card (+)

      Features:

      14134.jpg
      • 3U compactPCI card with rear-panel I/O
      • 33 MHz 32 bit compactPCI interface
      • meets PICMG 2.0 R3.0 standard
  • StarGen  (1)
    • SFS2100
      The SFS2100 is a 6U CompactPCI PICMG 2.17 compliant StarFabric Switch card that supports 21 point-to-point connections (+)

      Features:

      13733.jpg
      • The SFS2100 is designed to maximize system performance and flexibility while protecting the investment in existing CompactPCI software and hardware
      • It enables OEMs and system integrators to quickly develop high-availability, carrier-class platforms for the embedded market
      • The SFS2100 offers twenty-one 2.5 Gbps full-duplex StarFabric connections to a PICMG 2.17 backplane in a hot swap CompactPCI 6U form factor for an aggregate switching bandwidth of 100 Gbps
  • CoSystems  (2)
    • CoMG1600
      A CompactPCI single board media gateway (+)

      Features:

      • Supports several signaling protocols, such as GR303, V5.1/V5.2, ISDN, or ISUP for the PSTN interface
      • Can switch voice traffic through the CompactPCI backplane
      • Supports MGCP as the protocol control interface for communication with the call agent
    • TSwitch
      A series of switching platforms for telecom operators (+)

      Features:

      • Available from line densities of 2000 channels to 80,000 in industry-standard CompactPCI form factor using E1 interface for ETSI-compliant networks and T1 interface for ANSI-compliant service providers and equipment vendors
      • High-density interface to the PSTN with MGCP-based control to the soft switch
      • SS7 resource onboard
  • SIE Computing Solutions, Inc.  (12)
    • 2.17 Backplanes
      A line of standard and custom, high-power, low-noise, StarFabric CompactPCI backplanes (+)

      Features:

      16831.jpg
      • Eight and 21 slots standard
      • Two to 21-slot custom configurations available
      • 6U and 7U format
    • 2.16 Backplanes
      A line of standard and custom high-power, low noise PICMG 2.16 CompactPCI backplanes (+)

      Features:

      16830.jpg
      • Standard eight-slot CompactPCI backplanes feature PICMG 2.9 IPMB to all slots, hot-swap compliance, and 5V or 3.3V switchable signaling
      • The eight-slot backplane offers one system slot that can be configured as a PICMG 2.16 node slot, six peripheral/PICMG 2.16 node slots, and one fabric slot
      • Custom configurations ranging from two to 21 slots available [...]
    • 6851 Series FabricPac PICMG 2.16 Platform
      A configurable CompactPCI platform with cPSB compliance (+)

      Features:

      12220.jpg
      • 8U rack-mount/benchtop chassis
      • 8-slot, PICMG 2.16-compliant FABRICON backplane with cPCI, H.110, and IPMB buses
      • Includes a Pentium III CompactPCI SBC to 1 GHz, a Layer 2 or 3 switch card, FDD, CD drive, 10 or 30 Gbyte EIDE hard drive, and memory from 128 to 768 Mbytes SDRAM
    • 585 Series CompactPCI Portable Enclosure
      A portable CompactPCI enclosure (+)

      Features:

      12218.jpg
      • PICMG 2.16 cPSB compliant backplane
      • 9U lightweight aluminum enclosure with eight vertical slots and a flush card cage
      • Slot 8 is double in width and reserved as the CPU slot, while Slot 7 is reserved as a fabric slot
    • 535 Series 9U 21 Slot cPCI Enclosure
      A mid-range, 19-inch, 9U rackmount/benchtop enclosure (+)

      Features:

      10309.jpg
      • 21 usable 6U x 160mm front-accessible slots and 21 6U x 80mm rear transition slots
      • 15.75” high x 17” wide x 12” deep
      • .09” lightweight 5052-H32 aluminium
    • StarFabric Development Kit
      A PICMG 2.17, StarFabric development platform (+)

      Features:

      16827.jpg
      • 15.75”H (9U) x 9.2/11.6”W x 11.7”D chassis (400 mm x 234/296 mm x 297 mm)
      • Eight-slot, 7U CompactPCI backplane with front and rear I/O
      • Up to eight links to the backplane and two front-panel links with chassis
    • 5359 Series
      FabricPac SM CompactPCI 2.16 compliant switch fabric platform (+)

      Features:

      32718.jpg
      • Currently in-stock for fast shipping
      • RoHS Level 5- and NEBS Level 3-compliant
      • Two redundant IPMI system management cards supporting single or dual system manager operation
    • StarFabric PMC
      32-bit/33 MHz, 64-bit/66 MHz PCI interface (+)

      Features:

      • Dual StarFabric links
      • External RJ-45 connections (shielded CAT5 cabling for up to 10 meters) or PICMG 2.17-compatible Pn4 interconnect
      • 400 MBps sustained throughput
    • 582 Series 1U 2 Slot or 2U 4 Slot cPCI Enclosure
      A 1U, rackmount platform for internet/intranet data networking applications (+)

      Features:

      14142.jpg
      • 1.75”H x 17”W x 12.5”D
      • two-slot 6U x 160mm/6U x 80mm IEEE 1101.10/1101.11-compliant CompactPCI subrack
      • Two-slot CompactPCI backplane which is Basic hot-swap compliant, H.110 compliant, and PICMG 2.9 IPMI compliant
    • 6851 Series
      A 2.16 Packet switch ready platform (+)

      Features:

      • 2.16 packet switch compliant 8 slot CompactPCI backplane with CompactPCI, H.110 and IPMB buses
      • CompactPCI 8HP Intel Pentium III Processor SBC
      • Hard drive, CD, and floppy
    • CompactPCI Backplanes
      A CompactPCI backplane family compatible with PICMG specifications 2.0 r3.0, 2.5 r 1.0, and 2.1 r1.0 (+)

      Features:

      7801.jpg
      • Two to 16 slots
      • 6U or 7U format
      • 64-bit operation
    • 500 Series
      Enhanced CompactPCI/VME enclosures for industrial and telecom computing systems (+)

      Features:

      33267.jpg
      • Durable and versatile open architecture
      • Available through unique "Quick-Turn" program; delivered within two weeks
      • Designed to meet VITA and PICMG backplane specifications
  • One Stop Systems Inc.  (5)
    • 4U CompactPCI Encl.
      A 4U high, by 12” deep, horizontal CompactPCI enclosure (+)

      Features:

      15780.jpg
      • Provides a rugged CompactPCI platform for applications that require up to eight 6U slots but do not require the redundancy of larger CompactPCI enclosures
      • Cable routing to rear I/O boards
      • One 5.25” front-access drive bay and one internal 3.5” drive bay
    • HW400c/2
      MPC7447A PowerPC processor, 1.0 GHz (+)

      Features:

      21950.jpg
      • Two CT Bus enabled PTMC sites (PT2MC or PT5MC)
      • High speed non-blocking Gigabit Ethernet switch
      • Dual node Gigabit Ethernet (PICMG 2.16 cPSB)
    • Pentium M CPU
      Pentium M 2.0 GHz, 1.8 GHz, or 1.6 GHz system/peripheral CPU board, up to 2 GB DRAM, 4HP (XX=GHz) (+)

      Features:

      32654.jpg
      • 6U
      • Part number: OSS-61M-T-XX
      • Intel E7501 chipset
    • HW400c/M
      An intelligent CompactPCI core platform with dual PCI Telecom Mezzanine Card (PPTMC) sites and a dual node CompactPCI Packet Switched Backplane interface (cPSB) (+)

      Features:

      10070.jpg
      • Integrates PTMC and cPSB technologies with the H.110 computer telephony and 64-bit/66 MHz PCU buses
      • PTMC sites provide computer telephony bus connectivity for computer mezzanine card form factor modules used in VoIP, VoATM, VPN, and AIN applications
      • Dual Node cPSB technology overlays the CompactPCI backplane with a high-availability, packet-switching fabric
    • OSS-ELB-3U/6U
      3U or 6U Expansion Link Board for CompactPCI Express with two x4 PCI Express cable links and auto-configurable CompactPCI Express backplane connectors (+)

      Features:

      30582.jpg
      • PICMG EXP.0 system slot compliant
      • x4 PCI Express PCI-SIG-compliant cable uplink
      • Configurable 2x8 or 4x4 PCI Express links to the backplane
  • Creative Electronic Systems  (3)
    • RIOC 4065
      PowerPC-based, CompactPCI twin PCI bus real-time processor board (+)

      Features:

      5171.jpg
      • PowerPC 750 at 400 MHz or 500 MHz with 1 MB external L2 cache or PowerPC 7410 at 500 MHz with 2 MB external L2 cache
      • Up to 1 GB SDRAM at 800 MBps
      • Two onboard dual PMC slots
    • TNS 4880
      Network processor-based, CompactPCI, real-time processor board (+)

      Features:

      19805.jpg
      • ATM with support of AAL0, AAL1, AAL2, and AAL5
      • IP (v4 + v6) over SONET or TDM (PPP, PPP-MUX, MLPPP)
      • OC12, OC3, E1/T1/J1, J2, and DS3/E3/T3 physical interface support
    • TNS 4080
      A network processor-based, CompactPCI, real-time processor board (+)

      Features:

      16532.jpg
      • ATM with support of AAL0, AAL1, AAL2, and AAL5
      • IP (v4 + v6) over SONET or TDM (PPP, PPP-MUX, MLPPP)
      • OC12, OC3, E1/T1/J1, J2, and DS3/E3/T3 physical interface support
  • Extreme Engineering Solutions (X-ES)  (12)
    • XChange1004
      Dual PrPMC CompactPCI Carrier Card with PICMG 2.16 Switched Ethernet (+)

      Features:

      • 100 MHz PCI-X CompactPCI and Local Bus Interfaces
      • Autosense System / Peripheral Slot
      • Hot Swap Support
    • XChange1102
      6U ruggedized CompactPCI Intelligent Carrier Card (+)

      Features:

      22446.jpg
      • AMCC 440GX PowerPC Processor
      • Dual PCI-X PrPMC slots
      • Ruggedized module, extended temperature (-40 ºC to +85 ºC )
    • XChange1002
      Dual PrPMC Carrier Card with PICMG 2.16 Switched Ethernet (+)

      Features:

      • 100-MHz PCI-X and Local Bus Interfaces
      • Hot Swap Support
      • Two 10/100/1000 Mbs PICMG 2.16 Backplane Ethernet Ports
    • XCalibur1200
      6U CompactPCI Single Board Computer (+)

      Features:

      22444.jpg
      • Single / dual Motorola MPC7447A PowerPC Processors
      • Dual PCI-X PrPMC Ssots
      • Up to 2 GB SO-IMM 266 MHz DDR SDRAM
    • XCalibur1002
      The XCalibur1002 is a 6U CompactPCI single-board computer with a PICMG 2.16 Gigabit Ethernet backplane interface and a 1.0 GHz IBM PowerPC 750GX Processor. The XCalibur1002 is well-suited for telecom, industrial, and general computing applications. The XCalibur1002 provides a highly-configurable processing platform. Its DDR-400 SDRAM provides up to 1 GB of local memory. An optional CompactFlash interface accepts up to 1 GB of non-volatile memory. Two PCI-X PrPMC slots are available for high bandwidth I/O. (+)

      Features:

      209658143022834261.jpg
      • IBM 750 GX PowerPC 1.0 GHz processor
      • Dual PCI-X PrPMC slots
      • Autosense system/peripheral slot
    • XPand1201
      The XPand1201 is a low-cost, flexible, development platform. This platform supports up to ten 1 in. or 0.8 in. pitch conduction-cooled CompactPCI modules. It provides 482 W of total simultaneous power, which can be distributed as up to 16 A on 12 V, up to 40 A on 5 V, and up to 20 A on 3.3 V. The heat from the internal conduction-cooled modules is conducted to sidewall exchangers, where it is dissipated to the ambient environment by forced-air cooling. (+)

      Features:

      209659884022298664.jpg
      • Development platform for conduction-cooled modules
      • Forced-air-cooled sidewall heat exchangers
      • Supports 1 in. or 0.8 in. pitch conduction-cooled CompactPCI modules
    • XChange1104
      PowerPC 440GX 533 800 MHz processor (+)

      Features:

      22466.jpg
      • 133 MHz PCI-X CompactPCI and Local Bus interfaces
      • Autosense system / peripheral slot
      • Up to 1 GB 333 MHz DDR SDRAM
    • XIt1003
      6U transition module (+)

      Features:

      • Supports breakout of 2 PICMG 2.16 10/100/1000 Mbps Ethernet ports
      • Supports two PIM (PMC I/O Module) interfaces to route PMC I/O out the rear panel
      • One RS-232 RJ-45 interface [...]
    • XIt2020
      PIM module (+)

      Features:

      22508.jpg
      • Two RJ-45 PICMG 2.16 10/100/1000 Mbps Ethernet ports
      • One RJ-45/RS232/RS422 serial port [...]
    • XCalibur4301
      Intel Corei7 Processor-Based Conduction- or Air-Cooled 6U CompactPCI Single Board Computer (+)

      Features:

      46676.jpg
      • Intel Core i7-610E, -620LE, and -620UE processors
      • Dual-core with hyper-threading technology
      • CompactPCI 6U module
    • XIt1000
      6U transition module (+)

      Features:

      • Supports breakout of 2 PICMG 2.16 10/100/1000 Mbps Ethernet ports
      • 40-pin IDE connector
      • 44-pin Laptop IDE connector
    • XPort1020
      MPC8270 at up to 450 MHz with integrated PCI (+)

      Features:

      • Twelve SCCs support a broad range of serial protocols
      • Autosense system/Peripheral slot
      • Hot swap support
  • Trenton Technology Inc.  (2)
    • CP16 CompactPCI SBC
      Intel® Pentium® M processor – 1.6 GHz to 1.8 GHz (higher speeds as available) (+)

      Features:

      19103.jpg
      • The Intel® E7501 chipset provides support for DDR200/266 memory, 2GB maximum
      • The CP16 provides direct support for up to seven expansion CompactPCI slots at 32 bits/33 MHz
      • The CP16 also provides up to four expansion slots at 64 bits/66 MHz
    • CP16
      A CompactPCI single board computer with PICMG 2.16 support (+)

      Features:

      16537.jpg
      • Intel Pentium M processor at 1.8GHz or 1.6GHz
      • Intel E7501 chipset
      • Ability to turn off the PCI bus to the backplane
  • Parsec  (2)
    • PM410
      A CompactPCI, PMC carrier board with StarFabric links (+)

      Features:

      • Supports two single-width PMC modules or one dual-width module
      • Supports 3.3V TTL or 5V TTL modules
      • 32-bit/33 MHz and 64-bit/66 MHz PCI interfaces
    • COTS Radar Signal Processor Platform
      Programmable RSP platform (+)

      Features:

      • High processing bandwidth
      • High data bandwidth
      • Built-in test features
  • Concurrent Technologies, Inc.  (8)
    • PP PMC/202
      A dual PMC carrier board for CompactPCI (+)

      Features:

      15202.jpg
      • Accommodates two single- or one dual-width 32- or 64-bit PMC module conforming to the IEEE-1386 standard
      • Both PMC sites support dual function modules and non-monarch processor PMC modules
      • I/O from each of the modules can be taken through the front panel or out of the back of the system with the use of a rear-panel I/O transition board
    • FP 110/019 - 6U CompactPCI Ethernet Switch
      FP 110/019 is a 24-port 10/100/1000Mbps Ethernet Switched Fabric Board for use in CompactPCI® PICMG® 2.16 and VITA 31.1 Packet Switched Backplane environments. It supports up to nineteen node boards, a fabric to fabric link and for user connections, up to four front panel Ethernet interfaces. It offers high speed, full line rate Layer 2 switching fabric on all Ethernet ports. Quality of Service (QoS) operation is supported with four priority queues and a variety of traffic classes for time-critical and multimedia traffic. System monitoring is provided by the PICMG 2.9 compliant IPMI subsystem, supporting the IPMB0 serial management bus. The FP 110/019 is an excellent choice for cost sensitive applications. Typical applications include networking equipment, voice over IP (VoIP) telephony systems and blade-based servers. FEATURES: 6U CompactPCI, Layer 2 Ethernet Switch, PICMG 2.16 and 2.9 compliant [...] (+)

      Features:

    • SYPCI/SE8 8 slot PICMG 2.16 Portable Chassis
      10U 19" rack mountable EMC CompactPCI enclosure (+)

      Features:

      22386.jpg
      • PICMG 2.16, Packet Switching Backplane
      • Eight slot backplane
      • One system slot (left hand slot)
    • SY PCI/P10 : 10 Slot, 10U PICMG 2.16 Chassis
      10U 19" rack mountable EMC CompactPCI enclosure (+)

      Features:

      22381.jpg
      • PICMG 2.16, Packet Switching Backplane
      • 10 slot backplane
      • One system slot (left hand slot)
    • FP 100/008 Switched Fabric Board
      10 ports, Ethernet switched fabric board, 10/100BASE-T (+)

      Features:

      19731.jpg
      • PICMG 2.16 and VITA 31.1 compatible
      • 8 node ports, fabric-to-fabric link, and a front panel interface
      • Marvell 88E6083 Fast Ethernet device
    • FP 110/008 Gig Ethernet Switch Fabric Board
      Entry-level, 10-port Ethernet switched fabric board for PICMG 2.16- or VITA 31.1-based systems (+)

      Features:

      22339.jpg
      • Up to 10/100/1000BASE-T Ethernet per port
      • Eight packet switching node ports
      • Fabric-to-fabric Ethernet link
    • FP 110/019
      A 24-port GbE Switched Fabric Board for PICMG 2.16- or VITA 31.1-based systems (+)

      Features:

      32516.jpg
      • Typically consumes less than 20 W
      • Offers twenty-four 10/100/1000Mbps autonegotiating Ethernet ports, 19 accessible via a PICMG 2.16 or a VITA 31.1 packet switched backplane
      • Switch core contains a wire-speed, Layer 2, Quality of Service (QoS) switch fabric
    • EthernetSwitch Fabric
      10 ports, Ethernet switched fabric board, up to 10/100/1000BASE-T (+)

      Features:

      • 8 node ports, fabric-to-fabric link, and a front panel interface
      • Marvell 88E6185 Gigabit Ethernet or Marvell 88E6083 Fast Ethernet devices
      • Non-blocking Layer 2 “unmanaged” switch
  • EKF-ELECTRONIK GmbH  (5)
    • PC1-Groove
      PC1-GROOVE is a powerful 4HP/3U CompactPCI CPU board, equipped with an Intel Core i7 processor (dual core, quad threads) (+)

      Features:

      • Scalable from 1.06GHz up to 2.66GHz clock (Turbo Boost up to 3.2GHz)
      • Integrated graphics
      • CompactPCI System Slot Controller
    • CompactPCI Serial Shelf Boards and Systems
      EKF offers continued lifecycle support for a wide range of �classic“ CompactPCI products, in addition to the latest CPU boards, peripheral cards, and systems defined under the PICMG CompactPCI Plus I/O and CompactPCI Serial standards. EKF offers boards and systems for standard and extended temperature ranges, as well as sealing and coating on request. PMC and XMC mezzanine modules expand the product portfolio. The EKF lifetime policy guarantees long-term avail- ability for all EKF products, while a three-year standard warranty protects your investment. [...] (+)

      Features:

      304846002861832289.jpg
    • PC1-GROOVE
      The PC1-GROOVE is a powerful 4HP/3U CompactPCI CPU board, equipped with an Intel Core i7 processor, scalable from 1.06GHz up to 2.66GHz clock (Turbo Boost up to 3.2GHz). (+)

      Features:

      203693804961272203.jpg
      • Two Gigabit Ethernet jacks
      • Two USB receptacles
      • Either DisplayPort connector for attachment of a high resolution display (DVI adapter available) or classic style VGA connector
    • PC3-ALLEGRO
      The PC3-ALLEGRO is equipped with up to 16GB RAM with ECC support. The backplane connectors comply with the PICMG® CompactPCI® PlusIO system slot specification, suitable for rear I/O or hybrid CompactPCI® Serial systems. Several low profile SATA SSD mezzanine modules are available as mass storage solution. [...] (+)

      Features:

      287392886861995644.jpg
    • SB1-OBOE
      SB1-OBOE is a Quad Port USB 3.0 & eSATA Host adapter peripheral slot board for PICMG® CompactPCI® Serial systems. (+)

      Features:

      235572487961404984.jpg
      • Four USB3/eSATA front panel combo connectors
      • USB 3.0 SuperSpeed controller and SATA III RAID controller
      • Each front panel connector is suitable for attachment of USB 3.0, USB 2.0, or eSATA-based peripheral devices
03/24/23 02:24
Close

Subscribe to Embedded Wireless updates