Embedded Wireless

Showing results for: chipcon cc2420
Refine Embedded Wireless companies and products:
embedded wireless m2m onstar lte wimax white-space near-field communications nfc wireless 802.11 wi-fi zigbee 802.15 802.15 4 module 802.15.4 airbee airbee wireless cc2420 cc2430 chipcon cc2420 compxs em2420 home automation homerf ieee 802.15 ieee 802.15 4 ieee802.15.4 long range wireless mc13191 mc13192 mesh networking module radio rf modems rf module rf modules rf receiver rf transceivers rf transmitter wireless remote control wireless sensors wpan wpans zdo zig bee zigbee-ready zigby zmd wireless sensor networks wireless sensor network
Click on any vendor
to see a listing of
chipcon cc2420 related products.
  • Texas Instruments, Inc.  (7)
    • MSP-EXP430FG4618
      Development Tool Includes Two TI MSP430 MCUs, Chipcon RF Module Connector for Accelerated Ultra-Low Power Design (+)

      Features:

      • Along with the two 16-bit MSP430 devices, the board includes a TI (Chipcon) radio frequency (RF) module connecter for developing low power wireless networks
      • The F2013 is a small 4 mm x 4 mm, 14-pin device that features a fully programmable clock system that provides wake-up from an industry leading 500 nano-amp standby to full-speed operation in less than one micro-second
      • The F2013 device also includes a 16-bit sigma-delta analog to digital (ADC) for high-precision sensing systems, 2 KB of flash and 128 KB of RAM memory, and a basic serial communication interface (USI) which makes SPI and I2C implementations easy
    • bq51013 wireless power receiver
      bq51013 wireless power receiver performs all three functions of rectification, voltage conditioning, and digital control (+)

      Features:

      52215.jpg
      • Small 1.9 mm x 3 mm package
      • Wireless Power Consortium Qi compliant
      • Features built-in protection against voltage, current, and temperature fault conditions and provides 93 percent peak efficiency
    • SimpleLink Wi-Fi CC3200 LaunchPad
      The SimpleLink Wi-Fi CC3200 LaunchPad development kit (with QFN-packaged device) is an evaluation development platform for the CC3200 wireless MCU, the industry’s first single-chip programmable MCU with built-in Wi-Fi connectivity. The board features on-board emulation using FTDI and includes sensors for a full out-of-the-box experience. This board can be directly connected to a PC for use with development tools such as Code Composer Studio Cloud IDE and IAR Embedded Workbench. (+)

      Features:

      329667044571240243.jpg
      • CC3200 Wi-Fi wireless microcontroller (MCU) in QFN package
      • Industry’s first devices to be Wi-Fi CERTIFIEDâ„¢ at the chip level by the Wi-Fi Alliance
      • USB interface to PC for CCS/IAR using FTDI USB drivers
    • Arria V FPGA RF Development Kit
      Altera Corporation and Texas Instruments Incorporated introduced a complete RF development kit that eases RF prototyping for systems based on Altera’s 28-nm Arria® V FPGAs. The modular Arria V FPGA RF Development Kit includes all the hardware and software needed for RF transmit, receive and digital pre-distortion feedback, reducing the amount of time needed to design and verify RF systems, such as wireless base stations, remote radio heads, and military radio and intelligence equipment, from months to weeks. (+)

      Features:

      205838756018942714.jpg
      • receive and digital pre-distortion feedback
      • , reducing the amount of time needed to design and verify RF systems
      • 2.5 times more transmit and digital pre-distortion feedback bandwidth
    • SimpleLink Sub-1 GHz CC1350 wireless MCU
      The CC1350 wireless MCU was the industry’s first dual-band solution in mass production, supporting Sub-1 GHz and Bluetooth Low Energy connectivity on a single chip. The ARM Cortex-M3-based device offers long-range connectivity up to 20 km paired with ultra-low power consumption of more than 10 years battery life. The CC1350 device, the first dual-band product in production, combines an RF transceiver with a 48 MHz ARM Cortex-M3 MCU. (+)

      Features:

      3684528878612514067.jpg
      • A dedicated radio controller handles low-level RF protocol commands, ensuring ultra-low power & ability to support both Sub-1 GHz (up to 20 km) and BLE protocols. [...]
    • SimpleLink Wi-Fi CC3000
      A self-contained 802.11 network processor that enables designers to add Wi-Fi to any device, even those powered by microcontrollers without operating systems, such as dishwashers, toasters, refrigerators, thermostats, and factory automation equipment. (+)

      Features:

      • Easily added to a PCB and provides RF compliance for regulations in the United States, Canada, and Europe (FCC, IC, and ETSI).
      • FRAM evaluation module kit is available for $199 through authorized distributors [...]
    • Resonant DC/DC Developer's Kit and Renewable Energy Developer's Kit
      The industry's lowest-power, single-chip RF platform for microcontroller-based applications (+)

      Features:

      41311.jpg
      • Combines low power and high functionality help bridge the gap between MCU and RF technology
      • Shrinks package and PCB size by 50 percent
      • Simplifies RF design
  • Airbee Wireless  (2)
    • Airbee ZMAC
      Fully ZigBee ready and complies completely with IEEE 802.15.4 specifications (+)

      Features:

      • Ready for integration with any application code enabling short-range wireless com
      • MAC (Medium Access Control) - The IEEE 802.15.4 MAC contains the protocol stack that enables peer-to-peer secure communications and performs management of peer and network connectivity with other ZigBee devices
      • Airbee-ZMAC is the foundation for wireless networking utilizing either Star or Mesh network topologies
    • Zigbee Network
      Airbee-ZNS, the ZigBee-ready protocol stack software is designed for maximum portability among various 802.15.4 radios and a host of microcontrollers (+)

      Features:

      • Physical Layer – The PHY layer bridges the rest of the stack components to the transceiver (RF) hardware, handles real-time hardware events such as interrupts, and manages the transmission and reception functions pertaining to the RF and the microcontroller as required by the upper layers. Timer and clock services, which collectively form the heart-beat of the system, are generated, managed and supplied to the entire system from the PHY layer; the PHY layer interfaces with peripheral and application devices
      • Media Access Control (MAC) layer – The MAC sublayer provides the interface between the Network Layer and the PHY layer
      • Essential features of MAC sublayer are beacon management, channel access through slotted/unslotted CSMA mechanism, and guaranteed time slots (GTS) management
  • Atmel Corporation  (3)
    • ZigBee RF4CE wireless/REB231ED-EK evaluation kits
      The ZigBee RF4CE wireless evaluation kit designed for ZigBee PRO and ZigBee RF4CE application development, and prototyping and the REB231ED-EK evaluation kit with antenna diversity support for the Atmel AT86RF231 device (+)

      Features:

      52213.jpg
      • Kits support ZigBee application profiles as well as IEEE 802.15.4 and proprietary wireless applications
      • Kits come with reference boards based on the Atmel ATmega128RFA1 and AT86RF231 wireless low-power transceivers and ZigBee-compliant software stacks ready for download at Atmel's website
      • [...]
    • AT76C902
      A second generation Voice over IP (VoIP) chip, designed for 802.11a/g wireless VoIP applications (+)

      Features:

      • The AT76C902 consists of an ARM946 processor for VoIP call control, authentication and signaling functions, and two subsystems - an ARM7and 802.11a/g Media Access Controller (MAC) that implements the 802.11a/g protocols, and a TEAK TeakDSPCore and integrated voice codec for voice processing function
      • Atmel's AT76C902 supports Wi-Fi Multimedia (WMM) and WMM Power Save modes
      • By supporting U-APSD and Scheduled APSD (S-APSD), solutions based on Atmel's AT76C902 have talk times of over six hours and stand-by times of over 220 hours on a 900 mA battery
    • AT73C203
      Standard power and battery management device for 3G wireless platforms (+)

      Features:

      17127.jpg
      • Provides an integrated solution for portable and handheld applications based on microprocessors that require smart power management functions, such as 3G phones, PDAs, palmtop computers, point-of-sale terminals, and 3G modems
      • Complete set of power supplies and interfacing systems based on Intel XScale processors
      • Three sets of step-down switching converters supply application cores, memories, and analog blocks, each with up to 1.2A
  • Kontron  (4)
    • M2M Developer Kit
      Consists of a COM Express® compatible Kontron nanoETXexpress-TT COM using the Intel® Atom™ processor E640 1 GHz and other Kontron M2M System boards housed in a small, 67mm x 100mm x 27mm chassis (+)

      Features:

      52498.jpg
      • The external USB port simplifies use of M2M SDKs provided by M2M ISVs
      • Sufficient storage is provided for M2M smart service applications, middleware and OS on the 4 gigabyte (GB) internal MicroSD card
      • Built-in accelerometer, dual HDMI and HD audio support enables designers to implement both movement tracking and intensive audio/video smart services features
    • Embedded Computing Module (ECM)
      Small, lightweight, military rugged design (+)

      Features:

      • Water, shock, and vibration resistant
      • Low power, high performance
      • Removable hard drive, 802.11 b/g wireless connectivity [...]
    • ECM
      A ruggedized, small-form factor PC engine for high-performance, application-specific mobile systems (+)

      Features:

      20607.jpg
      • Measures 6.5” (L) x 4” (W) x 1.8” (H)
      • Light weight and small enough for body-worn systems
      • Third-party, MIL-STD-810F certified packaging
    • OM9140
      The Kontron OM9140 series of 10GbE ATCA application-ready platforms offers carrier-grade, high-density solutions across a common platform capable of being converted into dedicated or cross-functional network elements for 3G and 4G wireless, IMS, IPTV, and core network applications (+)

      Features:

      46579.jpg
      • Kontron is currently assisting our TEM clients in a multi-phase migration program that prepares them to develop immediately with 40G-ready AdvancedTCA platforms and within a timetable that meets all the technical, cost, and revenue needs of our carrier and service provider clients [...]
  • Luxoft  (1)
    • BitCatcher ZigBee Network Analyzer
      Free-to-download BitCatcher is a simple and powerful tool for analyzing wireless transmissions over IEEE 802.15.4/ZigBee-based networks covering both US and European ISM bands. BitCatcher parses and displays packet information based on a customizable protocol description. Developers can modify the descriptions to extend existing protocols or to create new ones. BitCatcher comes with the preloaded wireless protocol descriptions for IEEE 802.15.4 MAC, ZigBee PRO, ZigBee Smart Energy, and ZigBee Light Link. Drivers and firmware for Atmel hardware platform are also included. (+)

      Features:

      228303566312419251.jpg
      • Windows and Linux support
      • Support of various 802.15.4 frequency bands: 2.4 GHz, 868 MHz and 915 MHz
      • Native ZigBee and Light Link specific security schemes support
  • Texas Instruments  (1)
    • CC2530
      Complete 2.4-GHz radio frequency (RF) system-on-chip solution (+)

      Features:

      • Supports the IEEE 802.15.4 standard and an extensive set of applications, including ZigBee PRO networks, ZigBee RF4CE remote controls, smart energy, home and building automation, environmental monitoring and wireless medical
      • Provides up to 256 KB of Flash memory to enable development of multiple network protocols, which TI supports with free, downloadable software and tools to ensure that customers have everything needed for complete system development
      • TI offers a variety of free protocol software stacks that are supported by the CC2530 to enable cost-optimized selection of network protocol based on system requirements
  • WinSystems, Inc.  (13)
    • PCM-ZIGBEE
      WinSystems' PCM-ZigBee is a PC/104-compatible board configured with a ZigBee wireless transceiver plus an optional Trimble GPS receiver (+)

      Features:

      35122.jpg
      • Addresses the unique need of most remote monitoring and control and sensor network applications
      • IEEE 802.15.4 ZigBee wireless interface
      • PC/104-compatible with XBee Pro transceiver
    • PPM-Wireless
      IEEE 802.11b/g standard, dual-mode, Wi-Fi-certified wireless LAN support (+)

      Features:

      20939.jpg
      • Up to 54 Mbps at 2.4 GHz
      • Industry-standard wireless LAN security support and upgradeable support for AES software implementation
      • Support for optional antenna for optimized WLAN performance for multi-antenna systems
    • 802.11 Module
      IEEE 802.11b/g Wi-Fi wireless LAN support (+)

      Features:

      • Up to 54 Mbps at 2.4 GHz
      • Industry standard wireless LAN security
      • Supports single or dual antennas
    • Embed Connectivity
      The LBC-GX500 achieves significant advancement in the application of wired and wireless connectivity technology applied to single board computers (+)

      Features:

      33634.jpg
      • Connectivity options include 802.11 wireless Ethernet, GSM/GPRS/CDMA cellular modem, ZigBee wireless RF module, 10/100 wired Ethernet, global-compliant dial-up (POTS) modem, six USB ports, and six COM channels
      • Provides an open and powerful industrial platform for management of geographically distributed machinery and sensors with a operational temperature of -40 °C to +85 °C
      • Full-featured SBC with a variety of on-board peripherals which eliminate the need for other I/O card
    • M2M Enabled SBC
      AMD Geode GX500@1W processor (+)

      Features:

      • High-resolution video controller supports CRT or LCD panels
      • 10/100 Mbps Ethernet controller and wireless 802.11
      • Supports POTS modem, GPRS/CDMA cellular modem, ZigBee and optional GPS receiver module
    • LBC-GX500 SBC
      A highly integrated SBC with GSM/CDMA, ZigBee, wireless 802.11 Ethernet, 10/100 Ethernet, dial-up modem, six USB ports, and six COM channels all on one card (+)

      Features:

      32072.jpg
      • AMD Geode GX500 @ 1 W processor with -40 °C to +85 °C operation
      • EBX-size board, 5.75" x 8.00" (147 mm x 203 mm)
      • Up to 512 MB of system PC2700 DDR SDRAM supported in a 200-pin SODIMM socket
    • Mini
      SUMIT-ISM module supports MiniPCIe cards for a variety of Wireless Technologies (+)

      Features:

      45062.jpg
      • Adds wireless LAN, WPAN, or WWAN communications to SUMIT-based systems
      • SUMIT-ISM module with MiniPCIe and USB support
      • MiniPCIe Connector includes: support for both Full and Half size PCIe MiniCards
    • PXM-MiniPCIe
      SUMIT-ISM board format defined by the SFF-SIG (+)

      Features:

      45042.jpg
      • Features a PCI Express (PCIe) MiniCard socket, which supports PCIe x1 and USB 2.0, as well as connections to an SMBus, LEDs for wireless network visual status, a SIM card for GSM and WCDMA application data storage, and a +1.5 and +3.3 V power source for the MiniCard
      • Can support different applications in the same socket
      • The removable MiniCard enables the addition of wireless functions such as WLAN, 802.11 a/g, cellular data, and Bluetooth
    • GPS Receiver Module
      A dual function PC/104-compatible module that supports both a GPS receiver and a socket cellular modem (+)

      Features:

      • GPS receiver provides position, velocity, and time data
      • Supports TSIP, TAIP, and NEMA 0183 protocols
      • Cellular wireless supports both GSM/GPRS and CDMA
    • PCM-GPS
      A dual function PC/104-compatible module that supports both a GPS receiver and a socket cellular modem (+)

      Features:

      • GPS receiver provides position, velocity, and time data
      • Supports TSIP, TAIP, and NEMA 0183 protocols
      • Cellular wireless supports both GSM/GPRS and CDMA
    • 12.1-inch Open-Frame Panel PC for Indust
      WinSystems' 12.1-inch open frame, color flat panel PC and 1.66GHz single board computer (SBC) based on the Intel® Atom. PPC3-12 is a compact, ready-to-mount flat panel display subsystem that also includes a resistive touchscreen integrated into a chassis less than 3" deep. It is perfect for networked applications since it is shipped with a wired Ethernet connection plus expansion option for 802.11 wireless Ethernet and/or CDMA/GSM cellular modems. The unit will operate from -30° to +70°C without the need of a fan. (+)

      Features:

      209658510052926618.jpg
      • Compact 12.1-inch AM TFT Flat Panel Display, 1024 x 768 resolution with LED backlight
      • Quick-response resistive touchscreen included
      • Includes PC-compatible Atom SBC with Fanless single core 1.66GHz Intel Atom N455 or dual core 1.8GHz D525
    • PCM-GPS
      A dual-function PC/104 module featuring a GPS receiver and cellular modem (+)

      Features:

      25323.jpg
      • Ideal for fixed and mobile embedded applications that require navigation, tracking, data logging, timing, and/or communications functions
      • GPS features: Lassen GPS receiver module provides position, velocity, and time data; TSIP, TAIP, and NEMA 0183 protocols; very low power requirement; supports pulse output for accurate time standard; external powered antenna connection via a standard SMA connector
      • Cellular wireless features: supports both GSM/GPRS and CDMA; socket support for Multitech wireless module; recognizes standard AT commands; alarm management, phone book management, and Short Message Services (SMS); Bluetooth support available soon
    • I/O-Intensive SBC
      A small, rugged, EPIC-compliant board (+)

      Features:

      35876.jpg
      • AMD GX500 at 1 W processor
      • Video with CRT or flat panel support
      • Ethernet, two USB, four COM, and 24 DIO channels
  • Qorvo  (2)
    • ZigBee Green Power chips
      The GreenPeak Technologies GP711 System-on-Chip is an IEEE 802.15.4 communications controller for integration into a ZigBee RF4CE [1], ZigBee PRO or ZigBee IP node. It supports dual PAN operation with two protocol stacks in the host processor, and provides a high-speed serial interface to the host processor. The GP711 is fully compliant with the IEEE 802.15.4 standard, providing robust spread spectrum data communication with a highly secure encrypted data flow. (+)

      Features:

      347870803861898286.jpg
      •  Ultra low cost PCB design, requiring no shielding, chip antennas or voltage regulators
      •  IEEE 802.15.4 compliant
      • Multi Stack / Dual PAN Support with RF4CE Duty Cycling and packet filtering through Deep Packet Inspection
    • GP712 multi-channel radio chipset
      The GP712 is a single radio, multi-protocol and multi-channel chipset for zigbee and Thread networks. The GP712 is the industry’s first radio communication controller to support up to three protocols concurrently with fully independent channel selection and simultaneous listening on different channels – at the cost of a single protocol solution – offering a future-proof connected home platform. This is a major cost reduction for designing single-SKU, multi-protocol gateways, STBs, connected thermostats, and intelligent sensors. (+)

      Features:

      3683130965718165520.jpg
      • In combination with Qorvo’s proven antenna diversity solution for best range and reliability, it offers the most feature rich and robust solution on the market today at no extra cost. [...]
  • SMC Networks  (15 of 16)
    • SMC2870W
      A 2.4-GHz, 54 Mbits/sec, wireless, multi-mode, 802.11g adapter (+)

      Features:

      • Installs and communicates without drivers
      • Configurable as: a wireless access point, to provide network access to other wireless 802.11g and 802.11b devices; as a repeater, through its support for Wireless Distribution System (WDS), to extend the range of a wireless 2.4-GHz network using either a point-to-point or point-to-multipoint configuration; or as a wireless adapter, to connect virtually any Ethernet-capable device into a wireless network
      • Fully compliant with IEEE standards
    • SMC2586W-G
      A 2.4-GHz, 802.11g wireless bridge (+)

      Features:

      • Bridges two or more wired LANs
      • Configurable as an access point/bridge, bridge master, or bridge slave
      • Security features include 64-bit or 128-bit key WEP wireless data encryption, 802.1x, Wi-Fi protected access (WPA), disabled SSID broadcast, wireless client isolation, and MAC address filtering
    • SMC2671W
      A 2.4-GHz, 11-Mbit/sec, wireless Ethernet adapter (+)

      Features:

      • Platform independent network adapter
      • Plug-and-play installation; no drivers required
      • 802.11b compliant
    • EliteConnect Wireless
      An 802.11a/g universal wireless access point and CardBus adapter (+)

      Features:

      • Provides secure, high-performance wireless access for more than 128 simultaneous users
      • Managed via a Web interface or EliteView management software for SNMP-based management
      • Authentication and security features include WPA, 802.1x authentication, support for FUNK Odyssey and Microsoft RADIUS server, and RADIUS MAC address authentication [...]
    • SMC2862W-G
      A 2.4-GHz, 54-Mbps, USB 2.0 WLAN adapter that provides wireless conectivity for Windows-based devices (+)

      Features:

      • Compatible with USB 1.0, 1.1, and 2.0
      • Connects to IEEE 802.11g or 802.11b wireless networks
      • Includes the EZ Installation Wizard
    • SMC2670W
      A 2.4 GHz frequency band, wireless Ethernet adapter (+)

      Features:

      • Converts any Ethernet-equipped device into a wireless network device
      • Plug-and-play; no drivers required
      • Compliant with IEEE 802.11b
    • SMC2455W
      A 2.4 GHz frequency band, autosensing, wireless LAN access point (+)

      Features:

      • Compliant with IEEE 802.11b
      • Data rates up to 22 Mbits/sec
      • Up to 1,155' operating range
    • SMC2621W-x
      A line of 11 Mbits/sec wireless print servers for parallel (SMC2621W-P) or USB (SMC2621W-U) printing devices (+)

      Features:

      • Built-in Ethernet port and an 11 Mbits/sec, 802.11b wireless client onboard
      • Supports both ad-hoc mode and infrastructure mode
      • Includes EZ Installation and Setup wizard
    • SMC2835W
      A 2.4 GHz frequency band, wireless LAN, Cardbus adapter (+)

      Features:

      • IEEE 802.11g draft and 802.11b-compliant
      • Data rates of up to 54 Mbits/sec
      • Up to 1,115' operating range
    • EZ-Stream Receiver
      A high-end, networked entertainment receiver that streams, plays, and shares audio (including Internet radio), pictures, and video (+)

      Features:

      • Connects to a wired or wireless network for access to Internet resources
      • Links to entertainment devices, inluding televisions and stereo receivers, via standard A/V connectors
      • Uses 802.11a/g technology for universal compatibility, speed, and bandwidth
    • SMC2802W
      A 2.4 GHz frequency band, wireless LAN, PCI adapter card (+)

      Features:

      • IEEE 802.11g draft and 802.11b-compliant
      • Data rates of up to 54 Mbits/sec
      • Up to 1,115' operating range
    • SMC2536W-AG
      a universal, high-power wireless CardBus adapter for enterprise networking (+)

      Features:

      • Conforms to the 802.11a, 802.11b, and 802.11g standards
      • EZ Installation Wizard
      • Supports multiple profiles
    • SMC2552W-G
      A 2.4-GHz, 802.11g wireless access point (+)

      Features:

      • Provides secure, high-performance, enterprie-class 802.11b and g network access
      • Wi-Fi protected access, up to 152-bit WEP encryption, AES, 802.1x authentication access control with key rotation, support for FUNK Odyssey, and Microsoft RADIUS Server
      • Up to 256 MAC address authentication, open/share authentication, disabled SSID broadcast, and up to 16 virtual LANs
    • SMC2482W
      A 2.4 GHz, autosensing, wireless LAN bridge (+)

      Features:

      • Compliant with IEEE 802.11b
      • Data rates up to 22 Mbits/sec
      • Up to 20 miles operating range with use of optional SMC high-gain antennas
    • SMC2632W
      A 2.4 GHz frequency band, wireless LAN PC card (+)

      Features:

      • Compliant with IEEE 802.11b
      • Data rates up to 11 Mbits/sec
      • Operating range up to 1,155'
  • RFM  (2)
    • XDM2510H
      Enables process automation OEMs to add WirelessHARTto their field device products (+)

      Features:

      45268.jpg
      • RFM is the only RF modules manufacturer to offer RF modules based on DUST Networks' IA-510(H) WirelessHART technology, which is widely recognized as being the foundation for the WirelessHART protocol
      • Compliant with WirelessHART specification
      • The XDM2510H provides a simple way to add WirelessHART functionality to process control field devices
    • ZPM3570
      The ZPM3570 is a low cost, long range, multi-purpose ZigBee PRO module. The ZPM3570 provides a 250 kb/s RF data rate with +20dBm (100mW) RF power coupled with a receive sensitivity of -103dBm to provide exceptional range and performance all in an FCC, IC and ETSI certified module. The ZPM3570 module also includes 1MB flash memory to accommodate data logging requirements. The ZPM3570 is built around Ember’s EM357 ZigBee RFIC coupled with a power amplifier and low noise amplifier to increase the RF transmit power and receive sensitivity. The 100mW coupled with the -103dBm receive sensitivity provides exceptional range. The on-module antenna keeps device costs low by eliminating the cost of a separate antenna. (+)

      Features:

      53549.jpg
      • .
      • .
      • .
  • Freescale Semiconductor  (2)
    • Power Architecture Smart Grid Portfolio
      Freescale’s portfolio built on Power Architecture® technology provides the security, throughput and connectivity options to enable the backbone and infrastructure of a connected grid. Two reference platforms are available today to help shorten your time to market. (+)

      Features:

      214418426961914332.jpg
      • MPC8309 Networked Smart Gateway: Seamless wireless connectivity (TCP/IP, 802.11n, ZigBee)
      • MPC8309 Networked Smart Gateway: Smart metering via ZigBee sensors (via SE 1.0 or MBus)
      • MPC8309 Networked Smart Gateway: Remote management and control of smart appliances (via ZigBee HA1.0);
    • P2020-MSC8156 AdvancedMC
      The Freescale P2020-MSC8156 AdvancedMC (AMC) reference design is a multi-standard baseband development platform for the next generation of wireless standards such as LTE, WiMAX, WCDMA and TD-SCDMA. (+)

      Features:

      184261053192881683.jpg
      • Single width, full height AMC form factor
      • QorIQ P2020 processor: dual e500v2 cores at 1.2 GHz
      • MSC8156 DSP: six SC3850 cores, built on StarCore technology, at 1 GHz each
  • Digi International  (3)
    • ConnectCore Wi-MX51
      Core module designed specifically for low-power, wireless multimedia applications (+)

      Features:

      43807.jpg
      • First wireless enabled core module based on Freescale's new high-performance i.MX51 processor
      • First to offer 802.11 a/b/g/n Wi-Fi and first to support Microsoft's new Windows CE 6.0 R3
      • The ConnectCore Wi-MX51 enables wired and Wi-Fi networking for low power embedded applications with demanding performance requirements such as displays within medical devices, digital signage, security/access control devices, point-of-sale equipment and industrial automation technology
    • iDigi start kits
      iDigi is termed “Platform as a Service” (PaaS) for developing wireless applications. With access to a sandbox development environment and other hosted software over a Web services interface, the platform connects to devices seamlessly so developers can focus on applications (+)

      Features:

      41800.jpg
      • The iDigi X4 Starter Kit ZB is ZigBee-based, with an XBee module, wall router, light and temperature sensors, and an IP-to-ZigBee gateway
      • The iDigi Wi-9P Starter Kit ZB has an ARM9 module, Wi-Fi module, ZigBee module and wall router, the same light and temp sensors, and a Python-based software environment
      • The iDigi BL4S100 Add-on Kit ZB adds a Rabbit BL4S100 SBC with its I/O features
    • ConnectCore for i.MX6UL
      Digi's new ConnectCore for i.MX6UL module delivers a secure and extremely cost-effective embedded communication module platform in a low-profile form factor slightly bigger than a postage stamp. Its innovative and scalable DigiSMTplus surface mount form factor (28mmx28mm) supports virtually unlimited design integration and flexibility without the burden of manufacturing complexity. (+)

      Features:

      329631629861316792.jpg
      • Secure, connected, highly cost-effective system on module based on 528 MHz NXP i.MX6UL-2 Cortex-A7 with up to 2 GB NAND Flash, 1 GB DDR3
      • Unique ultra-low-power and wake-up state management
      • Easy-to-use, stamp-sized, flexible SMTplus form factor
  • Sierra Wireless  (1)
    • MC8780 embedded mod
      Fujitsu Siemens Computers has selected the new Sierra Wireless MC8780 embedded module for integration into the newly launched LIFEBOOK P7230 professional notebook. (+)

      Features:

      • The Sierra Wireless MC8780 embedded module offers faster download speeds than previous models, with peak data rates of up to 7.2 megabits per second (Mbps). In addition, it is the first Sierra Wireless module designed for HSUPA networks, with uplink speeds more than five times faster than those available on current networks – up to 2 Mbps. The faster uplink speed is particularly important for customers who routinely send large files over the wireless network while mobile.
      • The LIFEBOOK P7230 is the first in the product line to migrate to the Sierra Wireless HSUPA module and is expected to begin commercial shipments in Europe this summer.
      • “Embedded UMTS enables easy data access whenever and wherever the users are. To optimize the benefits that embedded UMTS brings, speed is an integral part. The improvements to data speed and uplink provided by HSUPA technology are therefore another important step,” said Andreas Thimmel, Senior Vice President Volume Business at Fujitsu Siemens Computers. “We want the LIFEBOOK P7230 to offer the best possible mobile user experience, and collaborating with Sierra Wireless to integrate the latest in mobile broadband technology is a key part of delivering true mobility.”
  • Beck IPC GmbH  (2)
    • WLAN Solution
      Fast and Affordable Implementation of Wireless LAN Solutions with the IPC@CHIP® from Beck (+)

      Features:

      • Pohlheim, November 7, 2006 – Ethernet has largely become well-established in the industrial environment. However, there are still many applications that cannot be implemented with Ethernet, such as mobile systems or spatially separated stations in large machine halls or in the open field.
      • In these cases Wireless LAN technology (or WLAN for short) is ideal as a replacement for Ethernet since the TCP/IP protocol used enables the transparent transition from Ethernet to Wireless LAN Ethernet without having to convert the protocols. The latest encryption and authentication protocols offer at the same time satisfactory protection against unauthorised access. Depending on the environment, Wireless LAN can be used to cover distances between 50 and 300 metres and even more by using special antennas.
      • Beck's new WL01 Wireless LAN module provides the IPC@CHIP® Controller SC123 / SC143 with a fully-fledged Wireless LAN interface and enables both Infrastructure-Mode on an existing access point as well as Adhoc-Mode between several WL01 modules. The Beck IPC module is available from November 2006.
    • IPC@CHIP WLAN
      Cost-efficient Wireless LAN solution for the Beck IPC@CHIP® (+)

      Features:

      • From November 2006 Beck IPC will be offering an industrial wireless LAN extension called WL01 for the IPC@CHIP® Controllers SC123 / SC143. This extension makes it possible to also connect to mobile and distributed automation devices easily via TCP/IP without the need for any proprietary wireless solutions.
      • The connection of the separate and space-saving 23 x 36 x 5 mm add-on module to the IPC@CHIP® is implemented serially via an SPI interface with a maximum transfer rate of 48 MHz. The module supports the latest transmission standards 802.11b and g (11 and 54 Mbit/s in the 2.4 GHz range), as well as the security standards in compliance with 802.11i (WEP and WPA), and offers two antenna terminals for optimising reception and transmission.
      • An FK61-WL01 Development Kit will be offered for users to develop their own Wireless LAN solutions inexpensively and quickly. As well as the WLAN module and an adapter board for the existing DK61 IPC@CHIP® Development Kit, it also contains all the software libraries required, the documentation and a demo implementation with web configurator. It is also possible to configure the Wireless LAN module directly from the application program via a C-API, as well as using the freely adjustable web configurator.
  • Advantech Corporation  (14)
    • EKI-6311G
      Advantech Introduces 802.11b/g Industrial Wireless Access Point (+)

      Features:

      41480.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-6311G 802.11 b/g Wireless Access Point, Client Bridge and Repeater, which offers standards-based and license-free wireless connectivity for industrial devices, equipment, and applications
      • For maximum flexibility, the EKI-6311G supports multiple operating modes
      • As an Access Point, it allows wireless devices to communication with each other and with 10/100Base-TX Ethernet wired networks
    • EKI-6311GN
      Advantech Introduces an 802.11n Wireless Access Point for High-Speed Transmissions (+)

      Features:

      46262.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-6311GN, an IEEE 802.11n industrial wireless access point. The EKI-6311GN delivers three times the throughput rates of a normal 802.11g. It is fully backward compatible with legacy 802.11b/g frequencies. With the support of STP, WMM, and IGMP snooping protocols, the EKI-6311GN effectively improves the reliability of wireless connectivity. The EKI-6311GN can achieve data rates up to 150Mbps, which allows high-speed internet access with various data and network video surveillance transmissions. It provides 600mW high output power for long-range deployment up to 5km. Also, a Power over Ethernet injector enables a unified supply of data and power through a standard Ethernet cable. To maximize wireless network security and privacy, the EKI-6311GN incorporates 64/128/152-bit WEP data encryption, WPA, WPA2, 802.1x, which can filter external user and prevent illegal attacking. Some other EKI-6311GN features include, embedded 8dBi directional antenna with external N-type connector, wide operating temperature range (-20 ~ 70°C), and IP55 waterproof certification. [...]
    • EGD-4100W/4110W
      The EDG-4100W and EDG-4110W are RS-232 or RS-422/485 to WLAN data gateway modules (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the EDG-4100W and EDG-4110W, serial to wireless 802.11b boards for enabling wireless networking
      • Their 54 x 59 mm compact design can fit into almost any legacy OEM serial device and connect it to the wireless Ethernet world. Virtual COMport mapping is provided by both modules for convenient communications with the host PC through an 802.11b wireless network
      • The inclusion of digital I/O is a competitive advantage over similar modules
    • EGD-4100W and EDG-4110W
      RS-232 or RS-422/485 to WLAN data gateway modules (+)

      Features:

      • Serial to wireless 802.11b boards for enabling wireless networking
      • 54 mm x 59 mm compact design can fit into almost any legacy OEM serial device and connect it to the wireless Ethernet world
      • Virtual COMport mapping is provided by both modules for convenient communications with the host PC through an 802.11b wireless network
    • ADAM-6000W series
      Advantech launches Wireless Ethernet I/O Modules (+)

      Features:

      • (Cincinnati, Ohio – 11/17/2005) - The Industrial Automation Group of Advantech introduces the ADAM-6000W series wireless Ethernet digital I/O modules equipped with an embedded JAVA web page for remote status and control.
      • The ADAM-6050W, ADAM-6051W, and ADAM-6060W meet many diverse applications as they are equipped with numerous features and functions known as Smart I/O. The inputs can be configured to read a frequency signal, act as a counter, latching input or normal input. The outputs can be configured as pulse outputs, delayed outputs, and standard output. The output modules have a built-in communications watchdog which allows each output channel to be set to a known state if communication is lost. The user friendly interface allows for simple changes to the embedded JAVA web page without requiring JAVA programming knowledge. The units allow eight simultaneous web clients for viewing I/O status and control, if needed.
      • The ADAM-6000W series I/O modules use a wireless Ethernet standard IEEE802.11b as it is the most popular wireless network. They support Modbus/TCP and UDP protocols. These units handle industrial power and can be din-rail or panel mounted. The I/O design is suitable for applications such as building automation, environmental monitoring, production monitoring, and facility management.
    • ADAM-4570W
      A cost-effective data gateway between RS-232/422/485 and 802.11b wireless LAN interfaces (+)

      Features:

      • The ADAM-4570W is functionally transparent, efficient, and cost effective when legacy H/W and S/W must continued to be used
      • Brings the advantage of remote management and data accessibility to RS-232/422/485 devices that cannot connect to the Wireless Ethernet network
      • Supports 802.11b
    • EKI-1000 Series
      Advantech's EKI-1000 Device Servers and Modbus Gateways are now Class 1, Division 2 Certified (+)

      Features:

      • The Industrial Automation Group of Advantech announces that its Serial Device Servers (EKI-1351, 1352, 1521, 1522, and 1524) and Modbus Gateways (EKI-1221, 1222, and 1224) have received Underwriters Laboratories (UL) Class 1, Division 2 (groups A, B, C, and D) certification for use in hazardous locations
      • Installation of electronic devices in environments where flammable liquids, gasses and vapors may be present is a real challenge
      • It is critical to use the right equipment in these locations
    • TREK-755
      A fanless vehicle mounted computer that comes with a VIA Eden, low-power CPU (+)

      Features:

      • Applications in: depots, warehouses, transportation, agriculture, manufacturing, ports and container yards, distribution centers, shipyards
      • The rugged die-cast aluminum enclosure replaces the fan as it helps TREK-755 dissipate heat
      • Special design without ventilation holes that makes the front panel, back cover, and sides comply with IP65/NEMA4
    • EKI-2525SPI
      Advantech Launches PoE Switch with Fiber Connectivity (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the EKI-2525SPI, a ruggedized 4-port 10/100BASE-TX Power over Ethernet (PoE) unmanaged switch with integrated 100Base-FX single-mode fiber connectivity
      • PoE, a technology which is popular with enterprise IT, is relatively new to industrial and plant-floor applications
      • It allows the transmission of both power and data to Ethernet devices over standard twisted-pair Cat5/5e/6 cables
    • EKI-7659CPI
      Advantech Launches an 8+2 Gigabit Combo Port Managed PoE Ethernet Switch (+)

      Features:

      44402.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-7659CPI, an Industrial Managed PoE Ethernet Switch
      • This PoE switch not only features eight PoE ports, but also provides two Gigabit Ethernet ports, allowing high speed communications for many different industrial applications
      • Furthermore, the EKI-7659CPI supports IP-based monitoring and control, allowing users to access up to eight devices connecting through a standard web browser to check power status, shutdown, restart, and more
    • EKI-2528PAI
      Advantech Launches a ruggedized 8-port, unmanaged Industrial PoE Switch (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the EKI-2528PAI, a ruggedized 8-port unmanaged Power-over-Ethernet (PoE) Ethernet switch featuring a total of eight (8) 10/100Base-TX Ethernet ports, four (4) of which can supply power to PoE compliant devices
      • PoE, a technology which is popular with enterprise IT, is relatively new to industrial and plant-floor applications. It allows the transmission of both power and data to Ethernet devices over standard twisted-pair Cat5/5e/6 cables
      • More formally known as IEEE 802.3af, this standard specifies a supply of 48VDC at up to 15.4W per port
    • MPC-100
      Spill and dust resistant, IP 53 compliant (+)

      Features:

      • 10.4" high brightness TFT LCD display with touchscreen
      • Wireless connectivity
      • Three feet drop free on a concrete floor
    • PCM-3202i
      2-port AMONet RS-485 PCI-104 Master Control Card (+)

      Features:

      40238.jpg
      • Supports two independent Advantech Motion Network (AMONet) RS-485 master rings with each ring controlling up to 2048 I/O points, 256 axes, or a combination of I/O points and axes for motion control
      • The PCM-3202I allows direct data transfer between master and slaves without any operations in between
      • This customized solution saves wires, covers long distances, and supports high-speed real-time communications
    • ADAM-5017/5018
      The ADAM-5017P has eight different independent configuration channels (+)

      Features:

      36434.jpg
      • Supports power reverse Wide uni-polar or bi-polar input range
      • The ADAM-5018P is a Thermocouple Input Module which supports seven input ranges and types (J,K,T,E,R,S,B), and will filter functions to remove any unreasonable range
      • Both will support the High Common Mode function, which means channel-to-channel differential voltages can be up to 200 VDC
  • SENA Technologies  (2)
    • PSx10W Series
      Wireless Device Server product line (+)

      Features:

      35186.jpg
      • 802.11b/g type wireless network interface, WPA2 and 802.11i compliant wireless security
      • flexible operation mode
      • TCP/UDP multicasting, telnet COM port control protocol support (RFC2217 compliant)
    • Promi-SD Adapter
      The Promi-SD is a Bluetooth serial adapter product line designed to replace RS-232 serial cables with wireless connectivity when interconnecting peripheral devices (+)

      Features:

      • Provides transparent RS-232 serial cable replacement
      • Supports Bluetooth Serial Port Profile and Generic Access Profile
      • Interoperability with PDA, laptops, and more
  • Dust Networks  (2)
    • SmartMesh IA-510
      Wireless sensor networking system delivers embedded WirelessHART solutions to industrial automation vendors that are easy to integrate and simple to deploy (+)

      Features:

      • WirelessHART compliance: Interoperability with other WirelessHART field devices and gateways
      • Superior reliability:
      • >99.99 percent reliability, even in the most challenging industrial environments
    • SmartMesh XD
      Provides OEMs with highly reliable, ultra low-power and easy to integrate wireless sensor networking solutions (+)

      Features:

      • Ultra low-power RF technology
      • Innovative radio design consumes 80 percent less power than comparable radios
      • Delivers additional 5X increase in battery life
  • Adaptive Network Solutions GmbH  (1)
    • @ANY900-2
      783/868/915 MHz IEEE802.15.4/ZigBee RF module with U.FL antenna connector (+)

      Features:

      44497.jpg
      • For wireless sensing and control applications in smart metering, industrial automation and more
      • U.FL antenna connector enables rapid design-in, using a different external antenna for every application
      • ISM bands: 915 MHz in the US, 868 MHz in Europe and 783 MHz in China
  • Synapse Wireless Inc.  (3)
    • Synapse's SNAP
      Synapse's SNAP® technology is an award-winning IEEE 802.15.4, auto-forming, multi-hop, mesh network stack combined with an embedded Python interpreter for running application code (+)

      Features:

      42743.jpg
      • Self-healing mesh network
      • Instant-ON: communicate within milliseconds of power-up
      • All devices are peers - every node can bridge, route, and sleep
    • Synapse Portal
      Synapse's Portal is a wireless application development environment for building SNAP mesh networks, and provides complete access to all functions in every node on the SNAP network (+)

      Features:

      42744.jpg
      • Comprehensive administration tool for SNAP networks
      • Participates as a full-fledged peer on the network
      • Runs on Windows (2000, XP, Vista) or Linux
    • Synapse's SNAPconnect
      Synapse's SNAPconnect provides a seamless interface between devices on a wireless SNAP network and client applications either hosted either locally or across the Internet (+)

      Features:

      42749.jpg
      • Connect to any SNAP network anywhere in the world from anywhere in the world
      • Nothing to add to SNAP
      • Designed from the ground up to work with TCP/IP
  • Microchip Technology, Inc.  (5)
    • Free ZigBee Stack
      Microchip offers the smallest and only free (no-cost license and royalty free) ZigBee Stack, enabling lower development and system costs (+)

      Features:

      • Based on version 1.0 of the ZigBee protocol specifications
      • Support for 2.4 GHz frequency band
      • Support for all ZigBee protocol device types (Coordinators, Routers, and End devices)
    • PICDEM Z Demo Kit
      An ZigBee Technology wireless communication protocol development and demonstration platform (+)

      Features:

      • ZigBee software stack supporting RFD (Reduced Function Device), FFD (Full Function Device) and coordinator
      • Daughtercard with Microchip MRF24J40 IEEE-802.15.4 2.4 GHz transceiver
      • Microchip sniffer board with USB interface
    • MCP2030 AFE
      The MCP2030 is a stand-alone, analog front end (AFE) for smart, low frequency (125 kHz typical) wireless authentication applications such as passive-keyless-entry, tire pressure measurement systems (TPMS) and data acquisition. (+)

      Features:

      • Three input pins for three axis reception
      • Adjustable high input detection sensitivity (3 mVpp typical)
      • Programmable antenna tuning capacitance (63 pF, 1 pF/step)
    • ZG2100 Wi-Fi PICtail
      Microchip Technology and ZeroG Wireless have teamed up to enable Wi-Fi for a range of MCUs and DSCs in a small, low-power footprint (+)

      Features:

      • On an easy-to-use daughterboard (or PICtail in Microchip lingo, for their standard development kits), the ZeroG ZG2100M module controls MAC and baseband layers and connects to the Microchip host MCU or DSC using an SPI port
      • The host runs both a free TCP/IP stack and the system application
      • The small-footprint ZG2100M integrates the antenna, power amp, RF, and baseband circuitry into a fully FCC, IC, and ETSI certified module, saving both component costs and development time [...]
    • RN2483 and RN2903 Revolutionary End-Node Solutions
      The RN2483 and RN2903 are revolutionary end-node solutions that enable extremely long-range (up to 15 km), bidirectional communication with years of battery life for Internet of Things (IoT), Machine-to-Machine (M2M), smart city and industrial applications. The RN2483 is a fully certified LoRa technology modem for the European 433/868 MHz bands, and the RN2903 modem is for the 915 MHz North American band. Both modems come with the LoRaWAN Class A protocol stack, so they can easily connect with the rapidly expanding infrastructure driven by the LoRa Alliance to create Low-Power Wide-Area Networks (LPWANs), both as privately managed scalable deployments or telecom-operated public networks with nationwide coverage. Due to the long range of LoRa technology, these modems are able to operate without repeaters, reducing the total cost of ownership. Additionally, both the RN2483 and RN2903 are fully certified which saves significant certification costs and reduces time to market. (+)

      Features:

      340989079071831064.jpg
      • On-board LoRaWAN Class A protocol stack
      • ASCII command interface over UART
      • Compact form factor 17.8 x 26.7 x 3 mm
  • National Instruments  (3)
    • PXIe-8108
      High-performance embedded controller, which features an Intel Core 2 Duo T9400 processor and is designed to significantly reduce test times for PXI Express - and CompactPCI Express-based automated test systems (+)

      Features:

      42408.jpg
      • Engineers can use this 3U embedded controller in any PXI Express chassis to create a compact, high-performance PC-based platform for many test, measurement and control applications
      • With its 2.53 GHz dual-core processor, 800 MHz DDR2 memory and 1 GBps total system bandwidth, the NI PXIe-8108 is ideal for advanced RF and wireless test applications, high-throughput data acquisition systems and other applications that require intensive analysis, signal or image processing
      • NI PXIe-8108 optimizes RF and wireless test applications because measurement speed is related to the computational performance of the test system's controller
    • NI Measuremnt Suite
      Software suite that engineers can use with modular RF instrumentation for automated testing of Mobile WiMAX devices (+)

      Features:

      • Based on PXI Express instrumentation powered by multicore technology
      • Performs error vector magnitude (EVM), power and spectral measurements three to five times faster than traditional instruments
      • Typical residual EVM accuracy of -46 dB at 3.5 GHz (-10 dBm)
    • NI-5620
      A single-channel PXI/CompactPCI digitizer (+)

      Features:

      • For applications ranging from ultrasound and high-resolution ATE to digital communications analysis such as cable, DSL, and wireless test
      • 64 Msamples/sec
      • 10 KHz to 36 MHz (-3 dB bandwidth)
  • Ember Corporation  (1)
    • EM250
      The EM250 from Ember provides a true ZigBee System-on-Chip that combines a 2.4GHz IEEE 802.15.4 compliant radio transceiver with a powerful, efficient, industry proven 16-bit microprocessor with comprehensive hardware supported network-level debugging features to simplify development. (+)

      Features:

      • Flexible antenna interface allows easy antenna connection with or without external PA
      • Excellent noise immunity to 802.11b/ g. Exceeds 802.15.4 adjacent/alternate channel rejection specifications for improved co-existence
      • Digital RSSI / 802.15.4 Link Quality Indication
  • SCL Elements  (1)
    • CAN2GO
      Second generation CAN2GO Universal and VAV controllers (+)

      Features:

      52792.jpg
      • GW2 gateway
      • 400 MHz processors
      • 64MB of RAM
  • GreenPeak Technologies  (3)
    • Lime CM-08
      A tiny 5 cm2 (< 1 square inch) device that functions as a stand-alone communications system with transceiver, antenna, and low-power mesh network software onboard (+)

      Features:

      • Wireless transceiver and sensor interface allow users to connect appropriate sensors such as photocells, vibration detectors, infrared, or other devices
      • Onboard software adapts the available power to the device's consumption
      • Built-in mesh technology enables designers to create extended wireless IEEE 802.15.4 open standard [...]
    • GP501
      A new generation of ZigBee transceivers with a coexistence scheme that allows Wi-Fi, Bluetooth, and ZigBee chips to work side by side in the same device (+)

      Features:

      • ZigBee shares the 2.4 GHz frequency band with other Wi-Fi equipment, resulting in potential RF interference when operating simultaneously
      • The GP501 has a coexistence interface that enables arbitration over the shared radio frequency medium to prevent contention, signal degradation, and data loss
      • A new feature of the GP501 ZigBee transceiver chip is the Deep Packet Inspection (DPI) for ZigBee applications allowing the host processor to go into a deep-sleep mode to conserve power
    • EMERALD GP500C
      The Emerald GP500C is a communications controller chip for ultra low power wireless sensor networks (+)

      Features:

      37646.jpg
      • Has extreme low power features that enable energy harvesting solutions for wireless sensor networks
      • Incorporates a transceiver with a fully integrated communications layer and an on-chip energy manager
      • Is an “autonomous transceiver” able to drive and control the data communication instead of being driven by a microcontroller [...]
  • Phoenix Contact  (6)
    • RAD-80211-XD-BUS
      Wireless Ethernet Radio with modular I/O and firmware capabilities (+)

      Features:

      • Combines truly secure wireless communication with control of up to eight I/O modules
      • Up to 64 digital, analog, and pulse I/O can be interfaced directly to the radio
      • This flexibility saves installed cost for distributed Ethernet wireless I/O monitoring and control applications
    • -SYS-NEMA4X-900
      Radio-ready enclosure simplifies the installation of industrial wireless radio modems and small RTU devices (+)

      Features:

      • Provides robust, secure solution for remote data collection while saving installation time and preventing wiring errors
      • Pre-wired power rail has space for either a Trusted Wireless or GSM/GPRS radio modem and other components
      • 24 VDC power with backup prevents failure of critical operations due to power dips and brownouts, while the surge arrestor protects against lightning and surges
    • RAD-WHG/WLAN-XD
      Phoenix Contact's new WirelessHART gateway features an integrated 802.11b/g WLAN transceiver (+)

      Features:

      46083.jpg
      • The rail-mount gateway can increase the reliability and flexibility of a HART system
      • The 45 mm-wide RAD-WHG/WLAN-XD connects up to 250 WirelessHART field devices, converting HART data to Modbus TCP or HART UDP for easy integration into almost any host system
      • The integrated WLAN can serve as the backhaul connection, allowing the gateway to be installed in the field closer to the monitored devices
    • FL WLAN 5101
      The FL WLAN 5101 offers high-speed wireless networking up to 300 Megabits per second (Mbps), meeting the needs of the most bandwidth-demanding applications such as IP-based video surveillance, plant networking and mobile operator access for programming and maintenance. (+)

      Features:

      225475709981449187.jpg
      • Offers high-speed wireless networking up to 300 Megabits per second (Mbps)
      • Meets the needs of the most bandwidth-demanding applications such as IP-based video surveillance, plant networking and mobile operator access for programming and maintenance.
      • The new CM (Cluster Management) technology simplifies wireless network management. All access points in a WLAN network can be easily configured and managed via a single web interface using any access point within the network, without additional costs for expensive hardware or software.
    • RAD-ISM-900-EN-BUS
      A busable 900 MHz radio is the newest addition to Phoenix Contact's Trusted Wireless Ethernet (TWE) portfolio of industrial wireless products (+)

      Features:

      • The RAD-ISM-900-EN-BUS allows direct connection of I/O modules to the radio
      • The radio allows the user to collect I/O without a remotely located PLC or I/O data concentrator
      • The bused I/O is made accessible to the network using the readily available MODBUS protocol
    • PSI-GPRS/GSM-MODEM/RS232-QB-USA
      The new GSM/GPRS serial modem from Phoenix Contact provides global access to machines and systems via GSM connections (+)

      Features:

      • An integrated TCP/IP stack allows the implementation of simple control systems into the GPRS network
      • The PSI-GPRS/GSM-MODEM/RS232-QB-USA modem has the necessary PTCRB and AT&T approvals for legal use to GSM and GPRS networks within the U.S. and Canada
      • Once activated, the modem will work anywhere in North America where AT&T or Rogers Wireless cellular networks provide service coverage
  • Unex Technology Corporation  (7)
    • DNXA-97
      DNXA-97 is a 802.11n b/g 2T2R in the smallest half-size mini card with PCIe form factor (+)

      Features:

      45199.jpg
      • The smallest half-size mini card with PCIe form factor in 2Tx/2Rx design is ideal for embedding into ultra-compact devices or embedding additional mini cards with complimentary technologies at comparable price points
      • Windows XP/Vista/7 drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
      • Atheros Direct Connect technology, which is forward compatible to the forthcoming Wi-Fi Alliance P2P standard, can establish a direct link with each other without the use of an access point (AP)
    • DNXA-95
      802.11n b/g wifi 1x1 PCIe half-size mini card, HB95/AR9285 (+)

      Features:

      • The smallest PCIe form factor in 1Tx/1Rx design is ideal for embedding into ultra-compact devices or embedding additional mini cards with complimentary technologies at comparable price points
      • Windows 2000/XP/Vista drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
      • Backward compatible to 802.11g and forward compatible to 802.11n provide the optimal upgrade path from legacy 802.11g solutions
    • DNUA-93
      An 802.11n b/g WiFi MIMO USB module designed to provide enhanced WiFi performance for embedded WiFi products that host processors not originally intended to support WiFi functions (+)

      Features:

      42826.jpg
      • Integrated CPU and memory to run more of WiFi function on-chip to offload wireless processing overhead from the host appliance
      • 35 x 18mm small dimension with standard USB connector is ideal for embedding into new ergonomic home gateways, set-top boxes, gaming consoles, printers, and variety of other embedded WiFi products
      • Windows 2000/XP/Vista, and Linux drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
    • DHXA-195
      DHXA-195 is the industry's first 1-stream 802.11n WiFi plus Bluetooth v2.1 combo solution on a single half-size mini card with PCIe form factor (+)

      Features:

      45200.jpg
      • 802.11n 1Tx/1Rx WiFi plus Bluetooth v2.1 combo solution on a single half-size mini card with PCIe form factor is ideal for embedding into ultra-compact devices or embedding together with complimentary 3G technology on the same platform
      • Advanced high-performance WiFi/Bluetooth coexistence schem allows faster Web surfing and file transfers, smooth media streams, and clear voice transmissions on the WiFi link, all with uninterrupted synching of wireless PC peripherals like mice and keyboard on the Bluetooth link
      • Windows XP/Vista/7 and Linux drivers enable ASD manufacturers to quickly and easily employ multi-radio coexistence on one platform with trouble-free WiFi and Bluetooth integration
    • DNXA-125: 11n b/g wifi mini card
      DNXA-125 is a 802.11n b/g 1T1R in the smallest PCIe half-size form factor using AR9485 single-chip solution features Atheros Align technology. (+)

      Features:

      204341291151742810.jpg
      • The smallest PCIe form factor in 1Tx/1Rx design is ideal for embedding into ultra-compact devices or embedding additional mini cards with complimentary technologies at comparable price points.
      • Windows XP/Vista/7 and ath9k drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration.
      • Backward compatible to 802.11g and forward compatible to 802.11n provide the optimal upgrade path from legacy 802.11g solutions.
    • DNUR-S2
      a 802.11n a/b/g wifi 2x2 MIMO USB module for USB-equipped wireless embedded systems and consumer electronics that demand robust link quality (+)

      Features:

      53329.jpg
      • 4.2cm x 2.5cm small dimension with 4-Pin USB 2.0 header is ideal for new ergonomic USB-equipped wireless embedded systems and consumer electronics
      • Windows 2000/XP/Vista/7 and Linux drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
      • Optimized RF architecture and baseband algorithms provide superior performance with low power consumption
    • CM10-HP
      CM10-HP (MMCX) is a high power 600mW(28dBm) IEEE802.11a/b/g 108Mbps wifi mini-PCI module with one MMCX RF connector (+)

      Features:

      • Extra power margin on current overshot tolerance prevents system shot-down to ensure trouble-free integration with different main boards
      • Average power up to 200mW (23dBm) and peak power up to 600mW (28dBm) on both 802.11a and 802.11b/g dual modes provide superior wifi coverage and application flexibility
      • Accurate power control reduces in-band frequency interference to dramatically improve the data throughput and range performance in high-density enterprise and commercial hot-spot deployments
  • Redpine Signals  (2)
    • Ultra-Low Power RS14100 Wireless MCU
      Redpine Signals RS14100 WiSeMCU family of SoCs and modules are the industry’s first Wireless Secure MCU family with a comprehensive multi-protocol wireless sub-system. The RS14100 has an integrated ARM Cortex-M4F ultra-low-power microcontroller, a built-in wireless subsystem, advanced security, high performance mixed-signal peripherals, and integrated power-management. Highlights include industry’s lowest Wi-Fi standby associated power, smallest integrated module, and highest level of throughput in a secure device. [...] (+)

      Features:

      4012233099124190052.jpg
    • RS9116 Connectivity Product Family
      Redpine Signals RS9116 family of SoCs and modules provides a comprehensive multi-protocol wireless connectivity solution including 802.11 a/b/g/n (2.4 GHz and 5 GHz), 802.11j, dual-mode Bluetooth® 5 and 802.15.4 (capable of running Thread or ZigBee®). Solution Highlights: (+)

      Features:

      4136331213967296643.jpg
      • Co-existence of multiple wireless protocols managed by an internal protocol arbitration manager
      • Ultra-low power consumption with multiple power modes to reduce the system energy consumption
      • Multiple levels of security including FIPS 140-2 and PUF (Physically Unclonable Function) to create a highly secure system
  • Interpeak, Inc.  (4)
    • Wireless Supplicant
      Software component for wireless client devices using WPA and WPA2 (+)

      Features:

      • Meets WPA and WPA2 supplicant requirements
      • Delivered as ANSI C source code
      • Runs on most popular operating systems out of the box (Integrity, Linux, OSE, and Vx Works)
    • IPWPASUP – Supplicant
      Software component for wireless client devices using WPA and WPA2 (+)

      Features:

      • Meets WPA and WPA2 supplicant requirements
      • Delivered as ANSI C source code
      • Runs on most popular operating systems out of the box (Integrity, Linux, OSE, and VxWorks)
    • IPPRISM
      Wireless driver for Conexant's PRISM 802.11 chipsets (+)

      Features:

      • Supports most popular operating systems out of the box (Linux, INTEGRITY, and OSE)
      • Portable to other operating systems and 802.11 chipsets
      • Configurable both as Access Point and Station
    • IPNET TCP/IP Stack
      Full-featured embedded IPv4/IPv6 TCP/IP stack (+)

      Features:

      • Range of networking tools, including WPA/WPA2 and Mobile IP
      • Virtual routing, quality-of-service, and multicasting supported
      • Compatible with latest IEEE standards for wireless security
  • Atific Oy Ltd.  (1)
    • Multi-radio WSN kit
      High performance FPGA based multi-radio wireless sensor network development kit (+)

      Features:

      • Extremely flexible and fully re-configurable development kit for developing new types of communication protocols, algorihms and computation architectures for mesh networking
      • Four parallel 1 Mbps radios with up to 83 selectable frequency channels allow simultaneous data exchanges with several neighbors
      • Up to four Altera NIOS softcore processors and custom HW accelerators synthesizable on FPGA enable powerful parallel computing and radio access
  • Avnet  (4)
    • Freedom Platform for Kinetis KW2x MCUs
      The FRDM-KW24D512 is a development platform based on the MKW24D512 Kinetis® W Series microcontroller and is enabled by software support for Thread, ZigBee Pro, 802.15.4 MAC, SMAC and Kinetis Software Development Kit (SDK). The FRDM-KW24D512 kit contains two boards, enabling point-to-point out of the box connectivity. (+)

      Features:

      350373575861342762.jpg
      • Supports MKW24D512 Kinetis® microcontroller (up to 50 MHz Cortex-M4 MCU, 512 KB Flash)
      • Full IEEE 802.15.4 compliant wireless node
      • Software support: Thread, ZigBee Pro, 802.15.4 MAC and SMAC, Kinetis Software Development Kit (SDK)
    • AT&T LTE Starter Kit II
      Certified, next generation Avnet-engineered LTE Cat-4 IoT Starter Kits are designed around latest Qualcomm quad-core processor technology. Highly integrated WNC M18QWG or M18Q2FG-1 based LTE System boards dramatically reduce hardware engineering requirements, ensuring that your focus can remain on creating unique, differentiated end products. LTE Cat-4 cellular connectivity, GPS and sensors (ambient light, temperature and accelerometer) are packaged in a unique, small form-factor LTE board, designed for system prototyping and cost-effective volume production. [...] (+)

      Features:

      3823528448618093177.jpg
    • Multi-standard CC2650 SensorTag Kit
      The new SimpleLinkâ„¢ multi-standard SensorTag kit invites you to realize your Internet of Things (IoT) product idea. Including 10 low-power MEMS sensors in a tiny package, the kit is expandable with DevPacks to make it easy to add your own sensors or actuators. (+)

      Features:

      350373967861650243.jpg
      • Support for 10 low-power sensors, including ambient light, digital microphone, magnetic sensor, humidity, pressure, accelerometer, gyroscope, magnetometer, object temperature and ambient temperature
      • Ultra-low power, with years of battery life from a single coin cell battery and enabling battery-less applications through the ARM® Cortex®-M3 based ultra-low power SimpleLink CC2650 wireless MCU.
      • Cloud connectivity lets you access and control your SensorTag kit from anywhere
    • Intel Quark MCU Developer Kit
      The Intel® Quark™ Microcontroller Developer Kit D2000 consists of a small form-factor board which contains among other things flash storage, a 6-axis compass/accelerometer with temperature sensor, an Arduino-Uno compatible shield’s interface and a booster-pack compatible shield’s interface. A USB connection enables programming and debugging (JTAG) of the development platform. (+)

      Features:

      350373029861345994.jpg
      • Extends excellent security to the device with software- and hardware-based features to help protect your data.
      • The kit works with other Intel-based systems and simplifies integration of edge products into end-to-end Internet of Things (IoT) architectures.
      • Simplifies design and reduces bill of materials (BOM) by minimizing external components required on the platform.
  • CommAgility  (10)
    • AMC-2C87W3
      Complete Digital Baseband design (+)

      Features:

      44259.jpg
      • L1 PHY (physical layer) L2 RLC/MAC (Radio Link Control/Media Access Control), S1/X2 interface and security processing for LTE (Long Term Evolution) or WiMAX in the compact single width, full-size Advanced Mezzanine Card (AMC) form factor
      • For these advanced wireless applications, the new CommAgility AMC-2C87W3 integrates the PHY, RLC/MAC, transport (including all backhaul and air interface security) and antenna connectivity requirements of eNodeB into a compact solution, and provides end-to-end data handling from raw radio IQ data through to backhaul IP packets
      • The module incorporates the latest WinPath3 Network Processor from Wintegra, which provides a flexible means of handling the Real-time IP packet and security processing and L2 RLC/MAC demands of wireless base stations
    • AMC-2C6670
      The AMC-2C6670 is a high performance signal processing AMC card for 4G wireless baseband and test equipment solutions including LTE and LTE Advanced. It is powered by the latest Texas Instruments TMS320C6670 DSPs plus a Xilinx Virtex-6 FPGA. It is ideal for LTE and LTE Advanced eNodeB and wireless test and other high performance applications. An IDT CPS-1848 Gen2 SRIO switch provides a 20Gbps per port Serial RapidIO infrastructure (+)

      Features:

      182331360939722149.jpg
      • [...]
    • AMC-RF2x2
      A wideband, highly flexible dual channel RF card in the AdvancedMC format. The new card provides a high quality RF interface for LTE and LTE Advanced wireless infrastructure applications, and is suitable for test equipment, research, demonstrators and trial systems. (+)

      Features:

      18605749786134257.jpg
      • Wideband RF, 699MHz to 3.8GHz, supporting all LTE bands
      • RF bandwidths up to 40 MHz for LTE Advanced
      • Supports 2x2 MIMO as standard
    • AMC-6487C
      An Advanced Mezzanine Card offering signal processing performance and bandwidth in a highly compact package (+)

      Features:

      36120.jpg
      • First single-width, full-height AdvancedMC card to be based on Texas Instruments (TI) multicore TMS320TCI6487 DSP
      • Suitable for wireless baseband and other processing-intensive applications such as WiMAX and Long Term Evolution of 3GPP (LTE)
      • Three software programmable TCI6487 DSPs, each containing three high-performance C64x+ cores running at 1 GHz as well as 3 MB on-chip memory
    • AMC-3C87F-GPS
      Single-width, full-size Advanced Mezzanine Card for 4G wireless PHY layer processing (+)

      Features:

      • Three Remote Radio Head (RRH) interfaces
      • Integrated GPS receiver
      • OCXO option for timing holdover
    • AMC-V6
      AMC-V6 FPGA AMC card for wireless baseband solutions including WiMAX and LTE (+)

      Features:

      46682.jpg
      • Xilinx Virtex-6 FPGA, either LX240T or LX550T
      • Three SFP+ sockets to support a CPRI or OBSAI antenna interface
      • 20 Gbps Gen2 RapidIO infrastructure from FPGA to AMC.4 backplane and front panel
    • AMC-2C6616/AMC-2C66
      AdvancedMC modules based on the latest high-performance TMS320TCI6616 base station System-on-Chip (SoC) and TMS320C6670 digital signal processor (DSP) from Texas Instruments Incorporated (TI) (+)

      Features:

      • The two modules harness the industry-leading power of TI's new devices and add high-speed, flexible I/O to deliver solutions for wireless base station and high-performance applications
      • The modules also include a Xilinx LX240T Virtex-6TM FPGA for additional I/O and co-processing flexibility
      • The AMC-2C6616 incorporates TI's new CI6616 SoC base station, and is targeted at LTE wireless base station applications, including development, trials and final deployment in the field
    • AMC-V7
      The AMC-V7 is a high performance FPGA-based interface and processing module for wireless baseband applications. It is a single width, mid-size Advanced Mezzanine Card form factor. The module is ideal for LTE wireless front-end applications requiring multiple CPRI links at up to rate option 8 (20x, 10.138Gbps line rate) and is also suitable for any FPGA processing application, especially where optical interfacing or SRIO support is required. FEATURES: Xilinx Virtex-7 FPGA, either VX415T-2 or VX690T-2 option Three SFP+ sockets to support a CPRI or OBSAI antenna interface 20gbps Gen2 RapidIO infrastructure from FPGA to AMC.4 backplane and front panel Full Gigabit Ethernet infrastructure Versatile clock generation, recovery & distribution Single width, full-size AMC card - mid-size form optionally available. [...] (+)

      Features:

    • AMC-V6
      High performance FPGA-based interface and processing module for wireless baseband applications (+)

      Features:

      46433.jpg
      • For maximum processing power, the AMC-V6 incorporates a Xilinx Virtex-6 FPGA
      • The new module is ideal for wireless radio head interfacing applications requiring multiple CPRI links at up to a 10x (6.144Gbps) line rate
      • The standard variant has an LX240T-2 FPGA, providing a cost-effective processing solution
    • AMC-V6L
      The AMC-V6L is a competitively priced high performance FPGA-based interface and processing module. It is a single width, mid-size Advanced Mezzanine Card form factor. The module is ideal for a wide range of applications including wireless, general-purpose FPGA acceleration and I/O processing. (+)

      Features:

      203499510941290967.jpg
      • Xilinx Virtex-6 FPGA, either LX75T-2 or LX240T
      • DDR3 SDRAM
      • Two SFP+ sockets to support a CPRI or OBSAI antenna interface
  • ADLINK Technology, Inc.  (5)
    • MXE-202i intelligent loT gateway
      The ADLINK Intelligent IoT Gateway Starter Kit provides a complete loT connection solution for reduced development time and quick deployment for every application environment. The loT Gateway Starter Kit includes ADLINK’s MXE-202i intelligent loT gateway, based on Intel® Atom™ E3826 processors, ADLINK’s EdgePro loT device & sensor management application, one light sensor and corresponding siren output, Modbus TCP module and accessories, utilizing industrial open standard protocols with security functions powered by Intel® loT Gateway Technology. (+)

      Features:

      350207589861132636.jpg
      • Provides a complete IoT connection solution for accelerated IoT application development
      • Easy configuration with user-friendly administrator interface and dashboards
      • Built-in ADLINK SEMA & SEMA Cloud remote management solution
    • IMT-BT Industrial Tablet
      The IMT-BT is an industrial, rugged mobile tablet, integrating the dual-core Intel® Celeron® processor N2807 for high performance computing power. Built-in WLAN or optional WWAN connectivity enables the IMT-BT to easily access information from a wide variety of industrial and commercial settings. An IP65 rating and 1.5 meter drop resistance (with optional rubber housing) support significantly ruggedized construction to withstand the most demanding environments. The IMT-BT holds its own next to consumer tablets, with a 10.1" capacitive touchscreen and built-in megapixel cameras on the front and rear. The display is protected by ultra-strong Gorilla Glass, making it virtually impervious to damage, able to flex when dropped without shattering or scratching. The IMT-BT supports 802.11 a/b/g/n/ac for maximum wireless speed. The data-only modem accommodates optional high-speed 3.5G HSPA+ or 4G LTE cellular connections. In office or outside, WLAN and WWAN connectivity support speedy reception and processing, and sunlight readability allows easy viewing in the field. The table is also equipped with an NFC reader/writer and supports recognition of RFID tags (13.56 MHz). A SAM (Secure Access Module) is standard, enabling communication of encrypted data for applications requiring higher levels of security. (+)

      Features:

      349601918751702645.jpg
      • Dual-core Intel® Celeron® N2807 SoC @ 1.58GHz
      • Operating Systems: Windows Embedded 8.1 & Android 4.4.2
      • 10.1 sunlight readable display, capacitive touchscreen; GPS, E-compass, G-sensor
    • XE-1400 Fanless Embedded Computer
      Combining superior processor performance, wireless capability, and rich, scalable I/O in a compact and robust package, the ADLINK MXE-1400 is an ideal choice for a wide range of applications supporting intelligent transportation, in-vehicle multimedia, and surveillance and factory automation applications. (+)

      Features:

      322951863942178158.jpg
      • Quad-core Intel® Atomâ„¢ E3845 processors
      • Single side I/O with easy access SATA drive bay
      • Compact 210 (W) x 170 (D) x 70 (H) mm housing
    • aTCA-9700 40G Ethernet AdvancedTCA® Processor Blade
      The aTCA-9700 offers enhanced thermal and power management capabilities for exceptional energy efficiency, while still supporting the intensive computing requirements of carrier-grade media server, networking, and wireless infrastructure applications. The aTCA-9700 40 Gigabit Ethernet processor blade features dual Intel® Xeon® E5-2600 v2 processors, as well as a single Intel® C604 chipset and dual Intel® Communications Chipsets 8920. It offers eight channels of VLP DDR3-1866 and REG/ECC memory up to 128 GB and provides versatile connectivity through quad 40GBASE-KR4 Fabric Interface channels, dual Ethernet 10/100/1000BASE-T Base Interface channels, and dual front panel 10/1001000BASE-T egress ports. Support for Intel® Hyper-Threading Technology and Intel® QuickPath Interconnect provides increased performance from both single and multi-thread workloads while maintaining thermal and energy efficiency. FEATURES: Two Intel® Xeon® processor E5-2600 v2 family (10C/20T) Two Intel® Communications Chipsets 8920; Intel® C604 PCH Eight memory sockets support VLP DDR3-1866; REG/ECC up to 128 GB Quad 40GBASE-KR4 Fabric Interface channels Two USB 2.0 ports, VGA, USB1/2, LAN1/2, COM1/2 (mini-USB) On-board bootable storage of 16G SATA flash (up to 64G) Intel® Hyper-Threading Technology Intel® QuickPath Interconnect [...] (+)

      Features:

    • aTCA-9700 40G Ethernet AdvancedTCA® Processor Blade
      The aTCA-9700 offers enhanced thermal and power management capabilities for exceptional energy efficiency, while still supporting the intensive computing requirements of carrier-grade media server, networking, and wireless infrastructure applications. The aTCA-9700 40 Gigabit Ethernet processor blade features dual Intel® Xeon® E5-2600 v2 processors, as well as a single Intel® C604 chipset and dual Intel® Communications Chipsets 8920. It offers eight channels of VLP DDR3-1866 and REG/ECC memory up to 128 GB and provides versatile connectivity through quad 40GBASE-KR4 Fabric Interface channels, dual Ethernet 10/100/1000BASE-T Base Interface channels, and dual front panel 10/1001000BASE-T egress ports. Support for Intel® Hyper-Threading Technology and Intel® QuickPath Interconnect provides increased performance from both single and multi-thread workloads while maintaining thermal and energy efficiency. FEATURES: Two Intel® Xeon® processor E5-2600 v2 family (10C/20T) Two Intel® Communications Chipsets 8920; Intel® C604 PCH Eight memory sockets support VLP DDR3-1866; REG/ECC up to 128 GB Quad 40GBASE-KR4 Fabric Interface channels Two USB 2.0 ports, VGA, USB1/2, LAN1/2, COM1/2 (mini-USB) On-board bootable storage of 16G SATA flash (up to 64G) Intel® Hyper-Threading Technology Intel® QuickPath Interconnect [...] (+)

      Features:

  • antcor  (1)
    • Ikarus OS
      Wireless AP mode (+)

      Features:

      20567.jpg
      • Wireless Client mode
      • Wireless Repeater mode
      • Wireless WDS mode
  • Laird Technologies  (4)
    • First LoRa+BLE wireless module for IoT
      Laird has introduced a new line of wireless modules that integrate long-range LoRa technology and short-range BLE technology for the first time in a commercial solution, giving companies the ability to create longer-range EIoT systems than previously possible with a single module. The RM1xx product family enables companies to dramatically expand the locations where IoT can be deployed by using the combination of long-range LoRa wireless technology and ultra low-power BLE technology integrated in the same module. http://www.lairdtech.com/products/rm1xx-lora-modules. (+)

      Features:

      342254675231494739.jpg
      • can transmit and receive data wirelessly between IoT deployments and gateways up to 10 miles apart (or longer with relays)
      • Integrating BLE with LoRa enables companies to deploy IoT networks that can go nearly anywhere, utilizing BLE for short-range, low-power connectivity between wireless devices while taking advantage of LoRa for communications over distance
      • In an industrial setting, for example, the RM1xx can monitor sensors on water, fuel, and chemical tanks throughout a facility via wireless low-power BLE technology or any traditional I/O connections
    • Laird's Dual-Band Wi-Fi+Bluetooth Module
      Laird has released its new 50 Series Enterprise Wi-Fi® + Bluetooth© modules, the next-generation of its popular dual-band embedded wireless modules that provide product engineers with a pre-certified solution that is optimized to ensure reliable, robust, secure connectivity in difficult RF environments. The 50 Series family of modules is designed to thrive in challenging settings with obstacles such as dense wireless signal traffic and complex physical geography, including hospitals, industrial sites, public areas and more. (+)

      Features:

      342255186231284384.jpg
      • Building on the well-regarded 40 and 45 series from Laird, the new 50 Series modules feature dual-band Wi-Fi® with 2x2 MIMO (Multiple-Input, Multiple-Output) capabilities, as well as both Classic Bluetooth and Bluetooth Smart capabilities.
      • The dual antennas improve reliability and further ensure that wireless connectivity is maintained so critical data can be shared at all times.
      • The 50 Series modules boast comprehensive, best-in-industry software with even faster scanning and roaming capability than prior generation solutions.
    • 50 Series Enterprise Wi-Fi® + Bluetooth©
      Laird announced the release of its new 50 Series Enterprise Wi-Fi® + Bluetooth© modules, next-generation of its popular dual-band embedded wireless modules that provide product engineers with a pre-certified solution that is optimized to ensure reliable, robust, secure connectivity in difficult RF environments. The 50 Series family of modules is designed to thrive in challenging settings with obstacles such as dense wireless signal traffic and complex physical geography, including hospitals, industrial sites, public areas and more. [...] (+)

      Features:

      337423410211954863.jpg
    • CL400
      The easy-to-use CL400 Wireless Ethernet Bridge provides outstanding data throughput and security for wireless applications in the M2M and industrial market segments with no configuration necessary. Users can simply plug in their Ethernet cable to apply power and have a wireless bridge at a distance up to one mile and speeds up to 11 Mbps, thereby extending the range of networks beyond the reach of traditional 802.11 access points. (+)

      Features:

      • Two CL400 units
      • Standard RJ-45 Ethernet jack
      • Two 2.4 MHz omnidirectional antennas with 5 dBi gain
  • EMBEST CO., LIMITED  (1)
    • UART to Wifi Module
      UART/Wi-Fi converter, embedded the TCP / IP protocol, IEEE 802.11 b/g protocol, and DATA converting firmware between UART and Wi-Fi (+)

      Features:

      44646.jpg
      • UART to IEEE802.11b/g and 802.11b/g to UART
      • UART interface: TTL level
      • Wi-Fi modes: ad-hoc mode and Access Point mode
03/24/23 02:09
Close

Subscribe to Embedded Wireless updates