Embedded Wireless

Showing results for: home automation
Refine Embedded Wireless companies and products:
embedded wireless m2m onstar lte wimax white-space near-field communications nfc wireless 802.11 wi-fi zigbee 802.15 802.15 4 module 802.15.4 airbee airbee wireless cc2420 cc2430 chipcon cc2420 compxs em2420 home automation homerf ieee 802.15 ieee 802.15 4 ieee802.15.4 long range wireless mc13191 mc13192 mesh networking module radio rf modems rf module rf modules rf receiver rf transceivers rf transmitter wireless remote control wireless sensors wpan wpans zdo zig bee zigbee-ready zigby zmd wireless sensor networks wireless sensor network
Click on any vendor
to see a listing of
home automation related products.
  • Qorvo  (3)
    • ZigBee Green Power chips
      The GreenPeak Technologies GP711 System-on-Chip is an IEEE 802.15.4 communications controller for integration into a ZigBee RF4CE [1], ZigBee PRO or ZigBee IP node. It supports dual PAN operation with two protocol stacks in the host processor, and provides a high-speed serial interface to the host processor. The GP711 is fully compliant with the IEEE 802.15.4 standard, providing robust spread spectrum data communication with a highly secure encrypted data flow. (+)

      Features:

      347870803861898286.jpg
      •  Ultra low cost PCB design, requiring no shielding, chip antennas or voltage regulators
      •  IEEE 802.15.4 compliant
      • Multi Stack / Dual PAN Support with RF4CE Duty Cycling and packet filtering through Deep Packet Inspection
    • GP695 SoC
      The GP695 is a complete SoC that "future proofs" smart home devices by integrating multiple communication protocols. It allows a single development platform and SKU, independent of the consumer's communication protocol, while optimizing efficiency and extending battery. The GP695 features Qorvo's industry-leading Wi-Fi interference mitigation technology and extended range that covers the entire home. It uniquely combines a Bluetooth-based smartphone interface with Thread or zigbee 3.0 for smart home applications (e.g., to lock a GP695-equipped door from a phone). (+)

      Features:

      3688633598618881888.jpg
      • The GP695 solves uncertainty around IoT standards, accelerating the smart home market by allowing consumers to control their smart homes without worrying about evolving communications protocols. [...]
    • GP712 multi-channel radio chipset
      The GP712 is a single radio, multi-protocol and multi-channel chipset for zigbee and Thread networks. The GP712 is the industry’s first radio communication controller to support up to three protocols concurrently with fully independent channel selection and simultaneous listening on different channels – at the cost of a single protocol solution – offering a future-proof connected home platform. This is a major cost reduction for designing single-SKU, multi-protocol gateways, STBs, connected thermostats, and intelligent sensors. (+)

      Features:

      3683130965718165520.jpg
      • In combination with Qorvo’s proven antenna diversity solution for best range and reliability, it offers the most feature rich and robust solution on the market today at no extra cost. [...]
  • RFM  (1)
    • XDM2510H
      Enables process automation OEMs to add WirelessHARTto their field device products (+)

      Features:

      45268.jpg
      • RFM is the only RF modules manufacturer to offer RF modules based on DUST Networks' IA-510(H) WirelessHART technology, which is widely recognized as being the foundation for the WirelessHART protocol
      • Compliant with WirelessHART specification
      • The XDM2510H provides a simple way to add WirelessHART functionality to process control field devices
  • Atmel Corporation  (1)
    • ZigBee RF4CE wireless/REB231ED-EK evaluation kits
      The ZigBee RF4CE wireless evaluation kit designed for ZigBee PRO and ZigBee RF4CE application development, and prototyping and the REB231ED-EK evaluation kit with antenna diversity support for the Atmel AT86RF231 device (+)

      Features:

      52213.jpg
      • Kits support ZigBee application profiles as well as IEEE 802.15.4 and proprietary wireless applications
      • Kits come with reference boards based on the Atmel ATmega128RFA1 and AT86RF231 wireless low-power transceivers and ZigBee-compliant software stacks ready for download at Atmel's website
      • [...]
  • Texas Instruments  (1)
    • CC2530
      Complete 2.4-GHz radio frequency (RF) system-on-chip solution (+)

      Features:

      • Supports the IEEE 802.15.4 standard and an extensive set of applications, including ZigBee PRO networks, ZigBee RF4CE remote controls, smart energy, home and building automation, environmental monitoring and wireless medical
      • Provides up to 256 KB of Flash memory to enable development of multiple network protocols, which TI supports with free, downloadable software and tools to ensure that customers have everything needed for complete system development
      • TI offers a variety of free protocol software stacks that are supported by the CC2530 to enable cost-optimized selection of network protocol based on system requirements
  • Freescale Semiconductor  (2)
    • Power Architecture Smart Grid Portfolio
      Freescale’s portfolio built on Power Architecture® technology provides the security, throughput and connectivity options to enable the backbone and infrastructure of a connected grid. Two reference platforms are available today to help shorten your time to market. (+)

      Features:

      214418426961914332.jpg
      • MPC8309 Networked Smart Gateway: Seamless wireless connectivity (TCP/IP, 802.11n, ZigBee)
      • MPC8309 Networked Smart Gateway: Smart metering via ZigBee sensors (via SE 1.0 or MBus)
      • MPC8309 Networked Smart Gateway: Remote management and control of smart appliances (via ZigBee HA1.0);
    • Ultra-low-voltage DC-to-DC converter IC
      Enables industry-leading solar cell startup and operating performance and efficiency at levels as low as 0.32 volts, as well as operation down to 0.25 V (+)

      Features:

      41310.jpg
      • Freescale's power conversion technology enables IC startup thresholds to be reduced to 0.32 V and efficiencies of nearly 90 percent
      • This technology breakthrough can enable practical and cost-effective ways to develop a wide range of single-cell solar power systems and other energy-harvesting applications, such as thermoelectric and mechanical scavenging systems
      • Potential applications include solar-powered battery chargers, trickle chargers for automotive systems, chargers for cell phones and laptops, remote data acquisition and industrial HVAC systems, PV-based traffic signals, solar-powered home and commercial lighting products, and self-powered wireless transponders
  • Imagination Technologies  (2)
    • MIPS Creator CI20
      The MIPS Creator CI20 is an affordable micro-computer that runs Linux and Android and enables open source developers, the maker community, system integrators and others to create a wide range of applications and projects, ranging from home automation and gaming to wireless multimedia streaming. (+)

      Features:

      293518819959661070.jpg
      • 1.2 GHz MIPS32-based, dual-core processor designed for superior performance and low power computing
      • PowerVR SGX540 graphics offering full support for OpenGL 2.1 and OpenGL ES 2.0
      • Dedicated video hardware for low power 1080p decoding at 30 fps; plus high-quality audio playback
    • Creator Ci40 IoT Kit
      The Creator Ci40 IoT kit is perfect both for individual makers inspired to build innovative connected projects at home, as well as small to medium enterprises or entrepreneurs who want to quickly prototype an IoT platform which can be easily turned into real product for volume production. If you’re a maker, an IoT developer, a Linux hacker or a company looking to build a revolutionary IoT project, Creator Ci40 is the ideal solution for you. (+)

      Features:

      329666150571124770.jpg
      • 550 MHz dual-core, dual-threaded MIPS interAptiv CPU
      • Run your choice of GNU/Linux distributions, including OpenWrt, Debian and Brillo
      • Support for key low-power wireless and wired protocols, including 802.15.4 6LoWPAN, 802.11 ac 2×2 Wi-Fi, Bluetooth 4.1 (Smart + Classic) and super-fast Ethernet
  • Quanmax  (1)
    • HPC-1000
      The HPC-1000 10.1" Panel PCs is combining the latest 45nm Intel Atom processor with the Intel 945GSE/ ICH7-M chipset for the most demanding home automation requirements (+)

      Features:

      • Intel Atom Processor N270
      • Intel945GSE / ICH7-M
      • Resistive 5-wire TouchScreen
  • Luminary Micro  (4)
    • Stellaris MCUs
      Stellaris family of 32-bit microcontrollers (MCUs) offers features such as an analog-to-digital converter and a sophisticated motion control unit, as well as large on-chip memories (+)

      Features:

      30712.jpg
      • Entire Stellaris line of MCUs brings high-performance 32-bit computing to embedded microcontroller applications at a cost equivalent to legacy 8- and 16-bit devices
      • All of the Stellaris MCUs are targeted at embedded and industrial applications, such as building and home automation, factory automation, motor control, and industrial power control devices [...]
    • LM3S101
      The LM3S101 is a high-performance ARM® Cortex™-M3 v7M architecture microcontroller designed for cost-sensitive applications (+)

      Features:

      • It is fully Thumb®-compatible with a Thumb-2-only instruction set and features hardware-division and single-cycle-multiplication
      • The integrated Nested Vectored Interrupt Controller (NVIC) provides deterministic interrupt handling
      • Target applications include factory automation and control, industrial control power devices, and building and home automation
    • LM3S102
      The LM3S102 is a high-performance ARM® Cortex™-M3 v7M architecture microcontroller is designed for cost-sensitive applications (+)

      Features:

      • It is fully Thumb®-compatible with a Thumb-2-only instruction set and features hardware-division and single-cycle-multiplication
      • The integrated Nested Vectored Interrupt Controller (NVIC) provides deterministic interrupt handling
      • Target applications include factory automation and control, industrial control power devices, and building and home automation
    • MDL-IDM and RDK-IDM
      Networked Intelligent Display Module (MDL-IDM) and Reference Design Kit (RDK-IDM) (+)

      Features:

      • Graphical touch-screen user interface solution for control, automation, and instrumentation applications
      • 2.8” QVGA 16-bit color LCD resistive touch panel display and Power-over-Ethernet (PoE) capability
      • Produce intelligent terminals that can be simultaneously powered and network-connected by a single CAT5 Ethernet cable
  • Unex Technology Corporation  (3)
    • DNUA-93
      An 802.11n b/g WiFi MIMO USB module designed to provide enhanced WiFi performance for embedded WiFi products that host processors not originally intended to support WiFi functions (+)

      Features:

      42826.jpg
      • Integrated CPU and memory to run more of WiFi function on-chip to offload wireless processing overhead from the host appliance
      • 35 x 18mm small dimension with standard USB connector is ideal for embedding into new ergonomic home gateways, set-top boxes, gaming consoles, printers, and variety of other embedded WiFi products
      • Windows 2000/XP/Vista, and Linux drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
    • DNUA-93F
      802.11n b/g wifi USB adapter designed to provide enhanced WiFi performance for products that host processors not originally intended to support WiFi functions (+)

      Features:

      • Integrated CPU and memory to run more of WiFi function on-chip to offload wireless processing overhead from the host appliance
      • 30(L) x 17(W) x 8.5(H) mm small dimension with standard USB connector is ideal for new ergonomic home gateways, set-top boxes, gaming consoles, printers, IP cameras, and variety of other WiFi products that host processors not originally intended to support WiFi functions
      • Windows XP/Vista/7, and Linux drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
    • DNUA-93F
      802.11n b/g wifi USB adapter designed to provide enhanced WiFi performance for products that host processors not originally intended to support WiFi functions (+)

      Features:

      • Integrated CPU and memory to run more of WiFi function on-chip to offload wireless processing overhead from the host appliance
      • 30(L) x 17(W) x 8.5(H) mm small dimension with standard USB connector is ideal for new ergonomic home gateways, set-top boxes, gaming consoles, printers, IP cameras, and variety of other WiFi products that host processors not originally intended to support WiFi functions
      • Windows XP/Vista/7, and Linux drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
  • Digi International  (1)
    • ConnectCore Wi-MX51
      Core module designed specifically for low-power, wireless multimedia applications (+)

      Features:

      43807.jpg
      • First wireless enabled core module based on Freescale's new high-performance i.MX51 processor
      • First to offer 802.11 a/b/g/n Wi-Fi and first to support Microsoft's new Windows CE 6.0 R3
      • The ConnectCore Wi-MX51 enables wired and Wi-Fi networking for low power embedded applications with demanding performance requirements such as displays within medical devices, digital signage, security/access control devices, point-of-sale equipment and industrial automation technology
  • Advantech Corporation  (11)
    • EKI-6311G
      Advantech Introduces 802.11b/g Industrial Wireless Access Point (+)

      Features:

      41480.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-6311G 802.11 b/g Wireless Access Point, Client Bridge and Repeater, which offers standards-based and license-free wireless connectivity for industrial devices, equipment, and applications
      • For maximum flexibility, the EKI-6311G supports multiple operating modes
      • As an Access Point, it allows wireless devices to communication with each other and with 10/100Base-TX Ethernet wired networks
    • EKI-6311GN
      Advantech Introduces an 802.11n Wireless Access Point for High-Speed Transmissions (+)

      Features:

      46262.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-6311GN, an IEEE 802.11n industrial wireless access point. The EKI-6311GN delivers three times the throughput rates of a normal 802.11g. It is fully backward compatible with legacy 802.11b/g frequencies. With the support of STP, WMM, and IGMP snooping protocols, the EKI-6311GN effectively improves the reliability of wireless connectivity. The EKI-6311GN can achieve data rates up to 150Mbps, which allows high-speed internet access with various data and network video surveillance transmissions. It provides 600mW high output power for long-range deployment up to 5km. Also, a Power over Ethernet injector enables a unified supply of data and power through a standard Ethernet cable. To maximize wireless network security and privacy, the EKI-6311GN incorporates 64/128/152-bit WEP data encryption, WPA, WPA2, 802.1x, which can filter external user and prevent illegal attacking. Some other EKI-6311GN features include, embedded 8dBi directional antenna with external N-type connector, wide operating temperature range (-20 ~ 70°C), and IP55 waterproof certification. [...]
    • MIO-2261
      Advantech's MIO-2261 is an all-in-one Pico-ITX embedded Single Board Computer (SBC), designed around Intel ultra low power Atom N2600/N2800 dual core processor. It measures only 100 x 72 mm (same dimension as a 2.5" Hard Disk) which makes it easy to embed into space-limited systems, making it a perfect fit for power saving environments such as embedded handheld devices, medical and industrial equipment, small HMIs, and intelligent home automation. (+)

      Features:

      214415145961942038.jpg
      • Embedded Intel Atom Dual Core processor N2600/N2800 + Intel NM10, 1 x DDR3 memory supports up to 4 GB
      • DirectX 9, Dual Independent display: 18/24-bit LVDS + VGA
      • Flexible design using integrated multiple I/O: MIOe to approach vertical applications & keep domain knowhow
    • ADAM-6000W series
      Advantech launches Wireless Ethernet I/O Modules (+)

      Features:

      • (Cincinnati, Ohio – 11/17/2005) - The Industrial Automation Group of Advantech introduces the ADAM-6000W series wireless Ethernet digital I/O modules equipped with an embedded JAVA web page for remote status and control.
      • The ADAM-6050W, ADAM-6051W, and ADAM-6060W meet many diverse applications as they are equipped with numerous features and functions known as Smart I/O. The inputs can be configured to read a frequency signal, act as a counter, latching input or normal input. The outputs can be configured as pulse outputs, delayed outputs, and standard output. The output modules have a built-in communications watchdog which allows each output channel to be set to a known state if communication is lost. The user friendly interface allows for simple changes to the embedded JAVA web page without requiring JAVA programming knowledge. The units allow eight simultaneous web clients for viewing I/O status and control, if needed.
      • The ADAM-6000W series I/O modules use a wireless Ethernet standard IEEE802.11b as it is the most popular wireless network. They support Modbus/TCP and UDP protocols. These units handle industrial power and can be din-rail or panel mounted. The I/O design is suitable for applications such as building automation, environmental monitoring, production monitoring, and facility management.
    • EGD-4100W/4110W
      The EDG-4100W and EDG-4110W are RS-232 or RS-422/485 to WLAN data gateway modules (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the EDG-4100W and EDG-4110W, serial to wireless 802.11b boards for enabling wireless networking
      • Their 54 x 59 mm compact design can fit into almost any legacy OEM serial device and connect it to the wireless Ethernet world. Virtual COMport mapping is provided by both modules for convenient communications with the host PC through an 802.11b wireless network
      • The inclusion of digital I/O is a competitive advantage over similar modules
    • ATM-4233
      Advantech Launches All-in-One Industrial Chassis with High Computing and High Expansion Capacity (+)

      Features:

      • (Cincinnati, Ohio – 01/19/2006) - The Industrial Automation Group of Advantech introduces the ATM-4233, an all-in-one chassis for industrial automation platforms. Traditional Industrial PCs need to be connected to a separate keyboard, mouse, and monitor to provide the appropriate user interfaces. The ATM-4233 conveniently combines LCD display, keyboard, touch pad, function keys, cursor keys and OSD control in a single chassis.
      • The ATM-4233 has a powerful computing platform with high expansion capacity. It integrates a video A/D board to ensure CPU card compatibility up to Intel Pentium 4, Pentium M (fanless), and Celeron CPU cards. ATM-4233's offers 14 expansion slots that can be used for ISA cards, PCI cards, CPU cards, or any combination of these. There are two USB ports on the chassis front and it has an ATX-standard power supply. Changing parts has been made easy by a mechanical design where you can remove the top cover and have quick access to all components.
      • The chassis has been equipped with five function keys to the left of the LCD. To the right of the LCD, there are five cursor keys that assist with moving quickly through menus and change settings. An 88-key slim-type keyboard with a touch pad is hidden in a pull-out drawer. OSD control is conveniently placed in front to easily alter LCD brightness and contrast. To prevent accidental shutdowns, the reset and power buttons are placed behind a lockable door.
    • EIS-D110 – Edge Intelligence Server
      This powerful and complete IoT gateway starter kit empowers your IoT project with a reliable platform and open gateway technologies. The package includes a ready-to-run fanless automation system (Intel® Celeron® J1900 platform & Windows® 7 Embedded), IoT platform software, development kit and technical support service. Also included is Microsoft® Azure® service integration to provide data communication and management between local sensors and private/public cloud for IoT applications. (+)

      Features:

      3672114698611778632.jpg
      • Integrated hardware plus software to build up edge-to-cloud applications
      • Pre-configured system: Intel® Celeron® J1900 SoC, WES7E/Win 10 Enterprise with 4GB Memory, 64 GB SSD and wireless networking
      • Pre-integrated WISE-PaaS Software Package: WISE-PaaS/RMM, WISEPaaS/OTA, WISE-PaaS/Security, WebAccess/SCADA, WebAccess/IMM and WebAccess/HMI
    • ADAM-4150 and 4168
      The ADAM-4150 is a digital I/O module starting at $190 and ADAM-4168 is relay output module starting at $210. (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the ADAM-4150 and 4168. These modules are compact, versatile sensor-to-computer interface units designed for reliable operation in harsh environments.
      • The ADAM-4150 includes seven input channels and eight output channels with over current/short circuit protection. The ADAM-4168 has eight form A output channels.
      • Common features of the ADAM-4150 and 4168 include: high noise immunity (1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection), broad operating temperature range, power input range of +10 ~ +48 VDC, LED display to monitor the status of the address settings, digital filter function, digital output support pulse function, and Modbus RTU protocol.
    • EKI-2525SPI
      Advantech Launches PoE Switch with Fiber Connectivity (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the EKI-2525SPI, a ruggedized 4-port 10/100BASE-TX Power over Ethernet (PoE) unmanaged switch with integrated 100Base-FX single-mode fiber connectivity
      • PoE, a technology which is popular with enterprise IT, is relatively new to industrial and plant-floor applications
      • It allows the transmission of both power and data to Ethernet devices over standard twisted-pair Cat5/5e/6 cables
    • UNO-2170
      Advantech Launches Celeron M 1GHz Universal Network Controller with PC/104 Expansion (+)

      Features:

      • (Cincinnati, Ohio – 01/25/2006) - The Industrial Automation Group of Advantech introduces the UNO-2170. The UNO-2170 is a high-performance Celeron M grade PC-Based controller that supports PC/104 expansion, four serial ports, two Ethernet ports, two USB ports, as well as many other interfaces. The UNO-2170 supports Windows XP Embedded, Windows CE .NET, and Linux operating systems.
      • The UNO-2170 features include: a fanless Celeron M 1GHz or Celeron 600 Mhz CPU, 512 KB battery backup SRAM, 256 MB or 512 MB DDR DRAM, LM sensor which can retrieve CPU and core temperature for monitoring purposes, two RS-232 and two RS-232/422/485 ports with automatic flow control, two 10/100 base Ethernet ports, two USB 2.0 ports and one type I/II PC card, PC/104 extension, optional Windows CE .NET, or Windows XP Embedded (SP2) with enhanced write filter (EWF) protection.
      • The UNO-2170 starts at $890 and is available for purchase directly from Advantech at 1-800-205-7940 or from one of Advantech's North American distributors at www.eautomationpro.com/us. [...]
    • ADAM-5017/5018
      The ADAM-5017P has eight different independent configuration channels (+)

      Features:

      36434.jpg
      • Supports power reverse Wide uni-polar or bi-polar input range
      • The ADAM-5018P is a Thermocouple Input Module which supports seven input ranges and types (J,K,T,E,R,S,B), and will filter functions to remove any unreasonable range
      • Both will support the High Common Mode function, which means channel-to-channel differential voltages can be up to 200 VDC
  • Teseq/Schaffner EMC, Inc.  (2)
    • FN 2030 and FN 2090
      The FN 2030 general-purpose EMI filter and the FN 2090 multi-stage EMI filter. (+)

      Features:

      • RoHS compliant filters that were developed for applications requiring higher filter performance.
      • The FN 2030 has an excellent cost-performance ratio. Its uses include consumer goods, household equipment, medical systems, electronic data processing equipment and electrical equipment applications requiring only a single-stage EMI filter.
      • The FN 2090 dual-stage filter resolves more severe or complex EMI issues. Typical applications for the FN 2090 include building automation, plant automation, industrial applications, machinery, consumer goods, and household equipment.
    • FN3025/3026
      Schaffner's first three-phase EMC filters with modern plastic housings. (+)

      Features:

      • Because of their design, the new low-leakage, three-phase EMC filters are compact, lightweight and offer a high level of functionality. Their design is also user-friendly and reduces installation time.
      • The use of plastic materials and the elimination of potting compound in the FN 3025/3026 allow a weight reduction of up to 50 percent when compared to conventional EMC components.
      • . In addition, these highly functional filters feature electrical connections based on motor drive technology, hinged transparent safety covers and filter circuitry with low Y-capacitor values to minimize the filter's leakage current.
  • Haidar Technology  (1)
    • SegeNT
      SegeNT is a tiny embedded GUI controller module that enables OEMs to take their products to the next level by adding a graphic-rich, interactive and user friendly GUIs designed with uiLab, Haidar’s free embedded GUI design software. SegeNT includes all the hardware and software needed to turn a color display and touch screen into a powerful user interface touch surface. SegeNT is a perfect solution for embedded systems, including process automation, home automation, industrial control, medical devices, and office automation. (+)

      Features:

      303704716112713411.jpg
      • ï‚· Free Embedded GUI Design software
      • ï‚· Supports Displays up to WVGA (800X480) pixel resolution @ 16BPP color depth
      • ï‚· Advanced Object Oriented Architecture
  • Avalue Technology Inc.  (2)
    • Panel PC
      Panel PCs aimed for versatile applications such as industrial, commercial, in-vehicle, home automation, and medical (+)

      Features:

      46144.jpg
      • Intel Atom D525 dual core processors, including LPC Industrial HMI Series, MPC Interactive Digital Signage Series, FPC Infotainment Platform Series, and PPC Economical E-Service Platform Series [...]
    • Avalue Panel Computers
      Avalue's Panel PCs adopt the Intel Atom series and latest Core i7 series processors, featuring low power, fanless design and quick heat dissipation conditions (+)

      Features:

      • Touch panels leverage low refractive touch technology and a unique Super Anti-Abrasion (SAA) design, which allows the touch panel to reach hardness of 6.2 to 6.5, preventing scratches and increasing its durability
      • The computer uses an LED backlight display to reduce heat, power consumption and cost. The aluminum chassis protects the computer when it is used in more humid environments, such as factories or testing labs, ensuring that it operates reliably
      • The front panel is IP65 safety certified, and computer waterproof certification is optional
  • Dust Networks  (1)
    • SmartMesh IA-510
      Wireless sensor networking system delivers embedded WirelessHART solutions to industrial automation vendors that are easy to integrate and simple to deploy (+)

      Features:

      • WirelessHART compliance: Interoperability with other WirelessHART field devices and gateways
      • Superior reliability:
      • >99.99 percent reliability, even in the most challenging industrial environments
  • Tibbo Systems  (1)
    • SCADA / HMI and Industrial Automation
      AggreGate SCADA/HMI is a system for visualizing and operating processes, production flows, machines and plants. It is a highly reliable multi-user distributed solution which provides supervisory control and monitoring for many sectors (+)

      Features:

      • Process Control
      • Industrial Automation
      • Home Automation
  • SCL Elements  (1)
    • CAN2GO
      Second generation CAN2GO Universal and VAV controllers (+)

      Features:

      52792.jpg
      • GW2 gateway
      • 400 MHz processors
      • 64MB of RAM
  • Adaptive Network Solutions GmbH  (1)
    • @ANY900-2
      783/868/915 MHz IEEE802.15.4/ZigBee RF module with U.FL antenna connector (+)

      Features:

      44497.jpg
      • For wireless sensing and control applications in smart metering, industrial automation and more
      • U.FL antenna connector enables rapid design-in, using a different external antenna for every application
      • ISM bands: 915 MHz in the US, 868 MHz in Europe and 783 MHz in China
  • SENA Technologies  (1)
    • PSx10W Series
      Wireless Device Server product line (+)

      Features:

      35186.jpg
      • 802.11b/g type wireless network interface, WPA2 and 802.11i compliant wireless security
      • flexible operation mode
      • TCP/UDP multicasting, telnet COM port control protocol support (RFC2217 compliant)
  • DSL  (2)
    • Open frame panel PC
      With a choice of TFT LCD touch screens from 8.4" to 15”, the new fanless VOX-LCD open frame panel PCs meet the needs of a applications from home automation and industrial control to ticketing / payment systems (+)

      Features:

      47138.jpg
      • Choice of four TFT LCD touch screens ranging in size from 8.4" to 15"
      • Fanless 800MHz Vortex86DX CPU with 512MB RAM
      • 10/100Mbps LAN and up to 3 USB 2.0 ports and 6 serial ports cover the most challenging connectivity requirements
    • Protech SBCs
      The powerful new flexible and affordable 5.25 and 3.5 inch SBCs offer small form factor, low power, fanless solutions for a wide range of applications from automation, kiosk and POS systems to industrial monitoring and medical equipment. (+)

      Features:

      207801797081448002.jpg
      • Small form factor
      • Low power
      • Fanless
  • Beck IPC GmbH  (2)
    • IPC@CHIP WLAN
      Cost-efficient Wireless LAN solution for the Beck IPC@CHIP® (+)

      Features:

      • From November 2006 Beck IPC will be offering an industrial wireless LAN extension called WL01 for the IPC@CHIP® Controllers SC123 / SC143. This extension makes it possible to also connect to mobile and distributed automation devices easily via TCP/IP without the need for any proprietary wireless solutions.
      • The connection of the separate and space-saving 23 x 36 x 5 mm add-on module to the IPC@CHIP® is implemented serially via an SPI interface with a maximum transfer rate of 48 MHz. The module supports the latest transmission standards 802.11b and g (11 and 54 Mbit/s in the 2.4 GHz range), as well as the security standards in compliance with 802.11i (WEP and WPA), and offers two antenna terminals for optimising reception and transmission.
      • An FK61-WL01 Development Kit will be offered for users to develop their own Wireless LAN solutions inexpensively and quickly. As well as the WLAN module and an adapter board for the existing DK61 IPC@CHIP® Development Kit, it also contains all the software libraries required, the documentation and a demo implementation with web configurator. It is also possible to configure the Wireless LAN module directly from the application program via a C-API, as well as using the freely adjustable web configurator.
    • IPC@CHIP® EtherCAT
      IPC@CHIP® EtherCAT slave interface for intelligent, remote automation devices (+)

      Features:

      • From November 2006 Beck IPC will be offering an EtherCAT slave solution for its IPC@CHIP® SC123 / SC143 Embedded Controllers, specially designed for implementing remote field devices with local pre-processing or control functions on the EtherCAT bus.
      • The EtherCAT interface is based on the Altera-FPGA solution and in the first stage will support the EtherCAT profiles CoE (CAN over EtherCAT), FoE (File Access over EtherCAT) as well as the Process Data interface.
      • The EtherCAT Function Kit FK61-EC01 will be offered as an add-on to the existing DK61 IPC@CHIP® Development Kit for users to develop their own solutions quickly and simply. In addition to an EtherCAT slave extension for DK61 it also offers all the necessary C libraries as well as example applications in C and CoDeSys IEC61131-3. [...]
  • GE Appliances  (1)
    • Nucleus
      5 W plug computer that gathers energy usage data from the in-home smart network (+)

      Features:

      45626.jpg
      • One ZigBee radio for a smart meter
      • One ZigBee radio for appliances
      • Wi-Fi connection
  • Tibbo Technology  (9)
    • EM1000TEV Terminal Development System
      The ultimate platform for developing terminal and automation applications based on the EM1000 module (and, optionally, the GA1000 Wi-Fi add-on). [...] (+)

      Features:

      356233581358446047.jpg
    • Size 2 Tibbo Project PCB (TPP2), Gen 2
      Size 2 Tibbo Project PCB, Gen 2 is a Tibbo BASIC/C-programmable board with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity. The board has four UARTs. (+)

      Features:

      356227407358129531.jpg
      • 5-80 times better performance compared to the original TPP2
      • 10/100 Base-T Ethernet port with onboard magnetics and RJ45 jack
      • Optional Wi-Fi connectivity (with the GA1000 add-on)
    • DS1102 Programmable RS232/422/485 C.
      The DS1102 is a compact Tibbo BASIC/C-programmable controller with Ethernet and optional Wi-Fi* connectivity. The DS1102 targets serial-over-IP and serial control applications. (+)

      Features:

      356231664358837255.jpg
      • 10/100 Base-T Ethernet port
      • 3-channel RS232, 2-channel RS422, or 1-channel RS485
      • High-performance CPU (T1000)
    • DS1101 Programmable 3.5-channel RS232 C.
      The DS1101 is a compact Tibbo BASIC/C-programmable controller with Ethernet and optional Wi-Fi* connectivity. The DS1101 targets serial-over-IP and serial control applications. (+)

      Features:

      356231183358361614.jpg
      • 10/100 Base-T Ethernet port
      • 3.5-channel RS232 port
      • High-performance CPU (T1000)
    • EM1206 Programmable IoT Module
      The EM1206 is a compact Tibbo BASIC/C-programmable IoT Module with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity. The EM1206 has four UARTs. (+)

      Features:

      356229387358302250.jpg
      • High-performance CPU (T1000)
      • 10/100 Base-T Ethernet port
      • Optional Wi-Fi connectivity (with the GA1000 add-on)
    • EM1000 Programmable IoT Module
      Our flagship BASIC/C-programmable IoT module. Ethernet, as well as optional Wi-Fi and GPRS connectivity. Four serial ports supporting full-/half-duplex RS232, Wiegand, and clock/data modes. (+)

      Features:

      356229041358103528.jpg
      • High-performance CPU (T1000)
      • 10/100 Base-T Ethernet port (no RJ45/magnetics)
      • Optional Wi-Fi connectivity (with the GA1000 add-on)
    • EM1001 BASIC-programmable IoT Board
      Our flagship BASIC/C-programmable IoT board. Ethernet, as well as optional Wi-Fi and GPRS connectivity. Four serial ports supporting full-/half-duplex RS232, Wiegand, and clock/data modes. (+)

      Features:

      356228818358657005.jpg
      • High-performance CPU (T1000)
      • 10/100 Base-T Ethernet port with onboard magnetics and RJ45 jack
      • Optional Wi-Fi connectivity (with the GA1000 add-on)
    • Size 3 Tibbo Project PCB (TPP3), Gen 2
      Size 3 Tibbo Project PCB, Gen 2 is a Tibbo BASIC/C-programmable board with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity. The board has four UARTs. (+)

      Features:

      356227902358996322.jpg
      • 5-80 times better performance compared to the original TPP3.
      • 10/100 Base-T Ethernet port with onboard magnetics and RJ45 jack
      • Optional Wi-Fi connectivity (with the GA1000 add-on)
    • Size 3 Linux Tibbo Project PCB (LTPP3)
      LTPP3 is a Linux-based Tibbo Project System (TPS) board with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity. The board is based on a powerful 1GHz Cortex-A8 Sitara CPU and has four UARTs, as well as two CAN controllers. (+)

      Features:

      356228551358409510.jpg
      • 1Ghz Cortex-A8 Sitara CPU from Texas Instruments
      • 10/100 Base-T Ethernet port with onboard magnetics and RJ45 jack
      • Optional Wi-Fi connectivity (with the GA1000L add-on*)
  • HomePlug Powerline Alliance  (1)
    • IEEE P1905 Standard
      Support for IEEE P1905 Convergent Digital Home Network Standard (+)

      Features:

      52789.jpg
      • P1905 network includes combinations of stationary home networking devices and mobile devices
      • Standard provides an abstraction layer to established powerline, wireless, coaxial cable and Ethernet home networking technologies
      • Abstraction layer common interface allows applications and upper layer protocols to be agnostic to the underlying home networking technologies
  • SMC Networks  (1)
    • EZ-Stream Receiver
      A high-end, networked entertainment receiver that streams, plays, and shares audio (including Internet radio), pictures, and video (+)

      Features:

      • Connects to a wired or wireless network for access to Internet resources
      • Links to entertainment devices, inluding televisions and stereo receivers, via standard A/V connectors
      • Uses 802.11a/g technology for universal compatibility, speed, and bandwidth
  • Data Science Automation, Inc.  (1)
    • N/A
      Provide comprehensive research, manufacturing and business automation services (+)

      Features:

      • DSA currently provides services ranging from a short project consultation, writing detailed project specifications, or delivering complete turnkey automation solutions including all of the ancillary engineering necessary
      • Measurement & Automation
      • Enterprise & Integration
  • NXP Semiconductor  (1)
    • Kinetis KW41Z Wireless MCU
      The Kinetis KW41Z MCU family is the industry’s first true single-chip, multi-protocol wireless MCU with comprehensive enablement, targeted for consumer and industrial markets addressing applications like smart home and building, wearables, beaconing, metering, and appliances. The Kinetis KW41Z wireless MCU has enough memory to run a full application and multiple connectivity stacks. The DC-DC converter allows for direct connection to a battery and the dual-mode 2.4 GHz radio enables additional use cases. (+)

      Features:

      3689452538616458667.jpg
      • The KW41Z addresses smart home and building challenges by providing an MCU with the right performance and integration that balances cost, size, power, and security. [...]
  • American Portwell Technology  (1)
    • Portwell RS4U-8172-M2M
      Portwell's RS4U-8172-M2M is a compact embedded system designed for industrial automation and control targeting machine-to-machine applications featuring Intel® Celeron® N3350, and supporting 4K codec encoding and decoding, wide range DC input voltages, API (Application Programming Interface) function control, and integrated TPM (Trusted Platform Module). (+)

      Features:

      3677672111316170738.jpg
      • Intel® Celeron® processor N3350
      • Support 4K codec encoding and decoding
      • 2x integrated Realtek Gigabit Ethernet controller
  • Wi2Wi  (1)
    • W2CBW009Di
      WLAN Bluetooth module (+)

      Features:

      45041.jpg
      • Based on the Marvell 88W8688 WLAN chipset
      • IEEE Wi-Fi 802.11 b/g and Bluetooth 2.1 connectivity
      • 16 mm x 16 mm x 2.1 mm
  • SD-Omega Electronics Industry Co. Ltd.  (1)
    • SD830
      SD-Omega has now launched the 100% Viiv Ready Mini Platform. (Home Theatre PC) (+)

      Features:

      • Intel's first Dual-core Mobile CPU
      • Latest SATA and DDRII technology
      • Build-in MCE Card, TV Tuner and Remote Control
  • Texas Instruments, Inc.  (1)
  • Pro-Dex  (3)
    • CIX
      A 4-axis motion controller for either servo or stepping motors (+)

      Features:

      • Supports 14 general purpose bits, of which 8 are optoisolated and 6 are differential for optimum noise immunity
      • The step pulse, direction, home, overtravel inputs, and quadrature encoder feedback inputs are all differential
      • Includes a dual-port Ram for special functions where fast collection of large amounts of data is required
    • PC78
      One to four control axes (+)

      Features:

      • Servo, open-loop-stepper, or closed-loop-stepper axis control options
      • Standalone with high-speed RS-232 port
      • 16-bit DAC analog resolution
    • CIX – Intelligent Multi-Axis Motion Control
      One to four axis of Servo, Open Loop Stepper, or Closed Loop Stepper axis control options (+)

      Features:

      • Standalone with high-speed RS-232 port
      • 16 bit DAC analog resolution
      • Configurable PID filter with feed forward coefficients
  • Catalyst Systems Corporation  (1)
    • Openmake 6.41
      Delivers life-cycle automation process combined with full scriptless builds (+)

      Features:

      • Comprehensive solution incorporates life-cycle activity process scheduling with scriptless build technology
      • Accelerated build performance includes enhanced concurrent ALM processing
      • Supports the short-term goal of centralizing life-cycle processes
  • Spinwave Systems, Inc.  (1)
    • SWS-V
      Wireless Voltage Sensor (+)

      Features:

      36724.jpg
      • Map sensor data to pre-configured industry protocol objects (BACnet objects, LON SNVTs, or Modbus registers)
      • Wide range of mounting options
      • Interfaces to virtually any building automation (DDC) system
07/23/19 18:32
Close

Subscribe to Embedded Wireless updates