Embedded Wireless

Showing results for: lte
Refine Embedded Wireless companies and products:
embedded wireless m2m onstar lte wimax white-space near-field communications nfc wireless 802.11 wi-fi zigbee 802.15 802.15 4 module 802.15.4 airbee airbee wireless cc2420 cc2430 chipcon cc2420 compxs em2420 home automation homerf ieee 802.15 ieee 802.15 4 ieee802.15.4 long range wireless mc13191 mc13192 mesh networking module radio rf modems rf module rf modules rf receiver rf transceivers rf transmitter wireless remote control wireless sensors wpan wpans zdo zig bee zigbee-ready zigby zmd wireless sensor networks wireless sensor network
Click on any vendor
to see a listing of
lte related products.
  • NetLogic Microsystems  (1)
    • Multi-Core Processor for LTE eNodeB / Base Stations
      NetLogic Microsystems' XLP316L multicore processor integrates sixteen NXCPUs, and features a breakthrough quad-issue, quad-threaded and superscalar out-of-order processor architecture capable of operating at up to 2.0GHz (+)

      Features:

      • The XLP316L processor will be manufactured in the advanced 40nm process, and is targeted to offer unparalleled performance of 20Gbps and 30 million packets-per-second (Mpps) for converged data plane and control plane processing in LTE and LTE-Advanced base stations
      • In addition, the sixteen NXCPUs are fully cache and memory coherent for software applications to seamlessly run in Symmetric Multi Processing (SMP) or Asymmetric Multi Processing (AMP) modes
      • The unique combination of superior processor cores and scalability to sixteen NXCPUs makes the XLP316L the industry's highest performance multi-core communications processor for original equipment manufacturers (OEMs) developing next-generation LTE mobile infrastructure [...]
  • Octasic, Inc.  (1)
    • OCT2224W
      Efficient multicore DSP devices for basestation PHY and MAC (+)

      Features:

      45423.jpg
      • 24 Opus2 DSP cores able to process up to 64 HSPA+ or LTE users on a single device
      • Up to three native radio interfaces for MIMO and simultaneous air interfaces
      • Serial RapidIO, Gigabit Ethernet, USB, PCIe, NAND, TDM
  • CommAgility  (7)
    • AMC-V6
      High performance FPGA-based interface and processing module for wireless baseband applications (+)

      Features:

      46433.jpg
      • For maximum processing power, the AMC-V6 incorporates a Xilinx Virtex-6 FPGA
      • The new module is ideal for wireless radio head interfacing applications requiring multiple CPRI links at up to a 10x (6.144Gbps) line rate
      • The standard variant has an LX240T-2 FPGA, providing a cost-effective processing solution
    • AMC-2C6670
      The AMC-2C6670 is a high performance signal processing AMC card for 4G wireless baseband and test equipment solutions including LTE and LTE Advanced. It is powered by the latest Texas Instruments TMS320C6670 DSPs plus a Xilinx Virtex-6 FPGA. It is ideal for LTE and LTE Advanced eNodeB and wireless test and other high performance applications. An IDT CPS-1848 Gen2 SRIO switch provides a 20Gbps per port Serial RapidIO infrastructure (+)

      Features:

      182331360939722149.jpg
      • [...]
    • AMC-K2L-RF2
      The AMC-K2L-RF2 is a low-cost, high performance ARM and DSP based processing card based on TI's TCI6630K2L SoC which includes two integrated wideband RF transceiver channels, all in the compact Advanced Mezzanine Card (AMC) form factor. It is designed to support wireless baseband processing and a 2x2 MIMO air interface in radio test systems, small cells, and UEs for standard or specialised LTE and LTE-Advanced systems up to and beyond Release 10. (+)

      Features:

      322455957322726912.jpg
      • Texas Instruments TCI6630K2L SoC DSP
      • TI AFE7500 RF front end
      • Low cost, flexible card for small cells or as RRH
    • AMC-2C87W3
      Complete Digital Baseband design (+)

      Features:

      44259.jpg
      • L1 PHY (physical layer) L2 RLC/MAC (Radio Link Control/Media Access Control), S1/X2 interface and security processing for LTE (Long Term Evolution) or WiMAX in the compact single width, full-size Advanced Mezzanine Card (AMC) form factor
      • For these advanced wireless applications, the new CommAgility AMC-2C87W3 integrates the PHY, RLC/MAC, transport (including all backhaul and air interface security) and antenna connectivity requirements of eNodeB into a compact solution, and provides end-to-end data handling from raw radio IQ data through to backhaul IP packets
      • The module incorporates the latest WinPath3 Network Processor from Wintegra, which provides a flexible means of handling the Real-time IP packet and security processing and L2 RLC/MAC demands of wireless base stations
    • AMC-2C6616/AMC-2C66
      AdvancedMC modules based on the latest high-performance TMS320TCI6616 base station System-on-Chip (SoC) and TMS320C6670 digital signal processor (DSP) from Texas Instruments Incorporated (TI) (+)

      Features:

      • The two modules harness the industry-leading power of TI's new devices and add high-speed, flexible I/O to deliver solutions for wireless base station and high-performance applications
      • The modules also include a Xilinx LX240T Virtex-6TM FPGA for additional I/O and co-processing flexibility
      • The AMC-2C6616 incorporates TI's new CI6616 SoC base station, and is targeted at LTE wireless base station applications, including development, trials and final deployment in the field
    • AMC-6487C
      An Advanced Mezzanine Card offering signal processing performance and bandwidth in a highly compact package (+)

      Features:

      36120.jpg
      • First single-width, full-height AdvancedMC card to be based on Texas Instruments (TI) multicore TMS320TCI6487 DSP
      • Suitable for wireless baseband and other processing-intensive applications such as WiMAX and Long Term Evolution of 3GPP (LTE)
      • Three software programmable TCI6487 DSPs, each containing three high-performance C64x+ cores running at 1 GHz as well as 3 MB on-chip memory
    • AMC-V7
      The AMC-V7 is a high performance FPGA-based interface and processing module for wireless baseband applications. It is a single width, mid-size Advanced Mezzanine Card form factor. The module is ideal for LTE wireless front-end applications requiring multiple CPRI links at up to rate option 8 (20x, 10.138Gbps line rate) and is also suitable for any FPGA processing application, especially where optical interfacing or SRIO support is required. FEATURES: Xilinx Virtex-7 FPGA, either VX415T-2 or VX690T-2 option Three SFP+ sockets to support a CPRI or OBSAI antenna interface 20gbps Gen2 RapidIO infrastructure from FPGA to AMC.4 backplane and front panel Full Gigabit Ethernet infrastructure Versatile clock generation, recovery & distribution Single width, full-size AMC card - mid-size form optionally available. [...] (+)

      Features:

  • Tata Consultancy Services (TCS)  (1)
    • TCS LTE-eNB-01
      LTE System architecture comprises of Evolved Packet Core (EPC), evolved Node B (eNB) and User Equipment (UE). TCS has developed LTE protocol stack solution of eNodeB (LTE enodeb pr (+)

      Features:

      • Modular architecture
      • Expedient movement of modules from software to hardware and vice-versa
      • Scalable architecture
  • XILINX, Inc.  (1)
    • Xilinx Virtex-6 FPGAs for Higher-Bandwidth and Lower-Power Systems
      Virtex-6 LXT FPGAs for high-performance logic, DSP, and serial connectivity with low-power GTX 6.5 Gbps serial transceivers (+)

      Features:

      42302.jpg
      • Virtex-6 SXT FPGAs for ultra-high-performance DSP and serial connectivity with low-power GTX 6.5 Gbps serial transceivers
      • Virtex-6 HXT FPGAs for highest-speed serial connectivity with up to 64 GTH serial transceivers supporting line rates beyond 11 Gbps
      • Ideal development platform for 3GPP-LTE and advanced LTE base stations with higher densities, performance, and power amplifier efficiencies of up to 40 percent
  • Radisys Corporation  (7)
    • SEG 11000
      A robust telecom security gateway based on NDS standards that provides stateful firewalling and IPsec tunneling in a single platform (+)

      Features:

      46963.jpg
      • The Radisys LTE SEG secures LTE Access/Backhaul and LTE Packet Core networks, as well as current generation wireless offload applications like I-WLAN, UMA/GAN and FemtoCell that are evolving to LTE
      • The Radisys LTE SEG, is built around the carrier-grade Advanced Telecommunications Computing Architecture (ATCA), and offers world-class security features with multi-gigabit performance
      • The LTE SEG is also available as a turnkey ATCA blade that can be integrated into other network elements
    • Radisys Promentum ATCA 4.0 Platform
      40 Gigabit AdvancedTCA Application Ready Platform (+)

      Features:

      44296.jpg
      • As TEMs focus on building next-generation network elements, they need a platform providing next-generation switching, power, and cooling, and supporting high-bandwidth applications such as LTE, WiMAX, femtocell gateways, and video
      • Satisfying these requirements, the Radisys ATCA 4.0 platform, based on the company's 4th generation of AdvancedTCA products, ensures a smooth and economical transition to the ATCA 4.0 environment
      • Radisys ATCA 4.0 products are highly scalable and dense, and offer a four times performance improvement in both switching and processing capabilities over 10G offerings
    • ATCA-7240
      Third generation of products based on the Cavium Networks OCTEON family of multicore processors (+)

      Features:

      • 40G packet processing module provides a complete line-rate solution for applications found in the 4G LTE Evolved Packet Core (EPC)
      • Increased memory and I/O density, Smart Front-End support and the option for TCAM expansion
      • Designed to maintain system compatibility with the previous generation
    • FlexPacket ATCA-PP50 /FlexCompute ATCA-XE50 / FlexCore ATCA-FM40
      FlexPacket ATCA-PP50 (+)

      Features:

      36001.jpg
      • PP50 provides TEMs with deep packet inspection (DPI) capabilities to support advanced content-aware routing, traffic management, and security functions required by multi-service IP networks
      • The blade is engineered to meet the application needs of IPTV, 3G LTE aggregation gateways, and security platforms
      • Dual 1 GHz RMI XLR732 multicore MIPS64 packet processor
    • ATCA 40G Platforms
      Pre-integrated 40G ATCA Platforms. (+)

      Features:

      183838669505351182.jpg
      • Fixed & Mobile Broadband Networks
      • 3G & LTE Gateways including Internet Offload
      • DPI Policy Enforcement & Traffic Shaping
    • Promentum ATCA-4550 & ATCA-4555
      10-gigabit compute processing module based on Intel Xeon 5600 processor (+)

      Features:

      44557.jpg
      • The ATCA-4550 series are the 8th generation single board computers from Radisys
      • They are high performance, single slot AdvancedTCA computer modules based on the single socket L5638 or E5645 Intel Xeon processor
      • They are ideal for control plane and server functions for LTE wireless infrastructure, Deep Packet Inspection, IPTV, IP multimedia subsystems and defense application
    • Promentum ATCA-4580
      10-gigabit compute processing module based on a dual Intel Xeon 5600 processor (+)

      Features:

      44558.jpg
      • The ATCA-4580 is one of the 8th generation single board computers from Radisys
      • It is a high performance, single slot AdvancedTCA computer module based on a dual socket L5638 Intel Xeon processor
      • It is ideal for server-centric applications, media processing applications, or LTE infrastructure
  • Semtech Corporation  (2)
    • TopSync platform
      ToPSync firmware update for the ACS9510 (+)

      Features:

      • A single ACS9510 device can operate as a full IEEE 1588 boundary clock and provides two independently configurable slave and a master PTP ports
      • Addition of hybrid mode, a new mode of operation that interleaves with PTP to deliver better time delivery performance than PTP alone
      • Improved algorithm provides top-of-the-class performance in situations of critical PDV
    • TopSync platform
      ToPSync firmware update for the ACS9510 (+)

      Features:

      • Delivers a complete IEEE1588v2 precision time protocol (PTP) solution
      • 360 pin, 20 mm x 20 mm, 1 mm pitch multi-role device that can be used to provide synchronous equipment timing source (SETS) functionality in traditional TDM equipment (TDM timing mode) as well as standards-based timing for equipment used in packet switched networks (PTP grandmaster and PTP slave modes)
      • A single ACS9510 device can operate as a full IEEE 1588 boundary clock and provides two independently configurable slave and a master PTP ports
  • Cavium, Inc,  (1)
    • OCTEON Fusion Processors/CNF71XX
      OCTEON Fusion® Family, the industry’s most powerful, small cell “Base Station-on-a-chip� family are specifically designed for LTE & 3G multi-mode small cell base stations, including picocell and micro base stations. OCTEON Fusion processors combine OCTEON’s widely successful multi-core architecture along with purpose-built Baseband DSP cores, extensive LTE/3G hardware accelerators and digital front end (DFE) features into a single chip, slashing the BOM cost and power envelope of small cell base stations. This product family consists of multiple SoCs (system-on-a-chip) that enable small cells ranging from 32 users to 300+ users and up to dual 20MHz carriers, delivering industry-leading scalability. OCTEON Fusion is accompanied by FusionStack™ software, a comprehensive, interoperability tested (IOT), carrier-class L1 to L3 software suite for rapid time to market. OCTEON Fusion CPU cores are fully compatible with OCTEON multi-core processors enabling TEMs to seamlessly leverage their Cavium OCTEON-based macrocell L2-L7 software into OCTEON Fusion based small cell designs. FEATURES: •Unique carrier class features at full throughput – Self Optimizing Networks (SON), Multi-user MIMO with Interference Cancellation and built in OFDM wireless backhaul •Best in class co-processor blocks for security, scheduling, and ROHC for fast upper layer processing and QoS •Targeted baseband hardware accelerators and a deterministic single cycle wide bandwidth PHY memory architecture for ultra-low LTE end to end latency. •Comprehensive L1-L3 software suite from Cavium that has already undergone thorough IOT for faster operator trial and time to market •Leverage of OCTEON’s existing solutions in 2.5G/3G macro base stations with its broad ecosystem support [...] (+)

      Features:

  • National Semiconductor  (2)
    • SP16160CH1RB
      Intermediate frequency (IF) sampling receiver reference design for multi-carrier, multi-standard wireless basestations addressing GSM/EDGE, WCDMA, LTE and WiMAX standards (+)

      Features:

      43322.jpg
      • The SP16160CH1RB operates from a single 5V supply and includes the dual-channel ADC16DV160 16-bit, 160 mega-samples per second (MSPS) pipeline ADC, dual-channel LMH6517 DVGA, and LMK04031B clock jitter cleaner
      • The overall performance of the reference design is enabled by the high dynamic performance of the ADC, the low-noise and high-linearity of the DVGA and ultra-low rms jitter of the clock jitter cleaner. The ADC16DV160 delivers a signal-to-noise ratio (SNR) of 76.3 dBFS and SFDR of 91.2 dBFS at 192 MHz input IF, while the LMH6517 provides a noise figure of 6 dB and OIP3 of 45 dBm, and the LMK04031B clock jitter cleaner offers near 150 fsec of rms clock jitter
      • The SP16160CH1RB delivers an IF chain receiver sensitivity of -105 dBm, with a 9 dB carrier-to-noise ratio in a 200 kHz channel, at 192 MHz input IF
    • ADC16DV160
      The ADC16DV160 is the first dual-channel 16-bit, 160 MSPS pipeline ADC (+)

      Features:

      42697.jpg
      • It's targeted at multi-carrier, multi-standard GSM/EDGE, WCDMA, LTE, and WiMAX wireless basestations
      • The ADC16DV160 consumes less than half the power per ADC channel (650 mW) compared to competing single-channel 16-bit 160-MSPS pipeline ADCs, while offering the largest input-bandwidth (1.4 GHz) and the industry's best dynamic performance at high input frequencies
      • The ADC16DV160 delivers 91.2 decibels full scale (dBFS) spurious-free dynamic range (SFDR), 76.3 dBFS signal-to-noise ratio (SNR) and 97.3 dBFS higher-order harmonic distortion at 197 MHz input frequency
  • Adax, Inc.  (2)
    • GTP-AMC
      The Adax GTP-AMC card takes full advantage of an advanced on-board multi-core processor to support up to 32,500 GTP PDP contexts per card. (+)

      Features:

      220719201961363523.jpg
      • Advanced on-board multi-core processor
      • Supports up to 32,500 GTP PDP contexts per card
      • Supports GTP-U Termination, Bypass, and Relay
    • Adax Signaling Products
      Building blocks for system developers; signaling communications controllers and lower layer protocol software (+)

      Features:

      • Integrated software and blades for application developers; integrated signaling protocol stacks
      • Complete signaling gateways for everyone; multipurpose signaling gateways
      • Signaling nodes – SS7 or IP based STPs, HLR, VLR, SMSCs, databases, and more
  • RF Micro Devices  (2)
    • PowerSmart platforms
      Multiband front end for mobile devices (+)

      Features:

      44502.jpg
      • Wide range of mode coverage (GSM/GPRS, EDGE, EDGE Evolution, CDMA, TD-SCDMA, WCDMA/HSPA+, and LTE/4G)
      • Industry-leading band coverage (bands 1-6 and 8-10)
      • Standardized digital interface to connect to most transceivers
    • RFG1M
      RFMD's high-power GaN broadband power transistors (BPTs) are optimized for commercial infrastructure, military communications, and general purpose amplifier applications in the 700MHz to 2.2GHz frequency band. They are ideal for constant envelope, pulsed, WCDMA, and LTE applications. (+)

      Features:

      • Advanced GaN HEMT technology
      • High peak modulated power: RFG1M09090 >120W, RFG1M09180 >240W, RFG1M20090 >90W, RFG1M20180 >180W
      • Advanced heat sink technology
  • Freescale Semiconductor  (1)
    • P2020-MSC8156 AdvancedMC
      The Freescale P2020-MSC8156 AdvancedMC (AMC) reference design is a multi-standard baseband development platform for the next generation of wireless standards such as LTE, WiMAX, WCDMA and TD-SCDMA. (+)

      Features:

      184261053192881683.jpg
      • Single width, full height AMC form factor
      • QorIQ P2020 processor: dual e500v2 cores at 1.2 GHz
      • MSC8156 DSP: six SC3850 cores, built on StarCore technology, at 1 GHz each
  • Polaris Networks  (1)
    • LTE NetEPC
      NetEPC© combines the functions of the Evolved Packet Core (EPC) including the Mobile Management Entity (MME), the Serving Gateway (S-GW) and the Packet Data Network Gateway (PDN-GW) as per 3GPP standards and is well suited for deployment in commercial Long Term Evolution (LTE) networks. (+)

      Features:

      • combines the functions of the Evolved Packet Core (EPC)
      • highly scalable, integrated and cost-effective NetEPC© architecture
      • Polaris Networks NetEPC© can work in numerous scenarios including small-to-large local and regional networks
  • Interphase Corporation  (1)
    • LTE Demo System
      Application-ready system including the iSPAN 36701 eNodeB AMC and EPC emulator on an iSPAN 36MC1 Multicore Processor in a MicroTCA chassis with pre-integrated LTE software licenses (+)

      Features:

      47186.jpg
      • The iSPAN 36701 Wireless Base Station AdvancedMC (AMC) for highly integrated baseband processing
      • The iSPAN 36MC1 GE RJ45 OCTEON Packet Processor AMC for additional application processing and EPC simulation
      • A small footprint MicroTCA chassis and cable kit
  • Symmetricom Inc.  (1)
    • SoftClock SCi 2000 rel. 2.0
      SCi 2000 software clock solution for small cells, macro base stations and backhaul infrastructure (+)

      Features:

      • Frequency and Phase: the SCi 2000 supports the challenging LTE-TDD requirements of frequency (50 ppb at air interface) and phase (+/- 1.5 microseconds).
      • Multi-sync: SCi 2000 handles multiple sync standards including PTP 1588, SyncE, GPS, UTI and E1/T1; it allows systems to select from multiple sync inputs and provide the best possible clock output.
      • BesTime precise time reference management algorithm: the SCi 2000 takes multiple inputs and disciplines local oscillators to generate a highly accurate clock output. [...]
  • ADLINK Technology, Inc.  (1)
    • IMT-BT Industrial Tablet
      The IMT-BT is an industrial, rugged mobile tablet, integrating the dual-core Intel® Celeron® processor N2807 for high performance computing power. Built-in WLAN or optional WWAN connectivity enables the IMT-BT to easily access information from a wide variety of industrial and commercial settings. An IP65 rating and 1.5 meter drop resistance (with optional rubber housing) support significantly ruggedized construction to withstand the most demanding environments. The IMT-BT holds its own next to consumer tablets, with a 10.1" capacitive touchscreen and built-in megapixel cameras on the front and rear. The display is protected by ultra-strong Gorilla Glass, making it virtually impervious to damage, able to flex when dropped without shattering or scratching. The IMT-BT supports 802.11 a/b/g/n/ac for maximum wireless speed. The data-only modem accommodates optional high-speed 3.5G HSPA+ or 4G LTE cellular connections. In office or outside, WLAN and WWAN connectivity support speedy reception and processing, and sunlight readability allows easy viewing in the field. The table is also equipped with an NFC reader/writer and supports recognition of RFID tags (13.56 MHz). A SAM (Secure Access Module) is standard, enabling communication of encrypted data for applications requiring higher levels of security. (+)

      Features:

      349601918751702645.jpg
      • Dual-core Intel® Celeron® N2807 SoC @ 1.58GHz
      • Operating Systems: Windows Embedded 8.1 & Android 4.4.2
      • 10.1 sunlight readable display, capacitive touchscreen; GPS, E-compass, G-sensor
  • Xiamen Four-Faith Communication Technology Co.ltd  (1)
    • F3A36 4G/LTE Industrial Router
      F3A36 4G/LTE Industrial Full Band Coverage Router compatible with major network, including TD-LTE, FDD-LTE, TD-SCDMA, WCDMA, EVDO, CDMA1X, GPRS/EDGE etc., project operation can choose more convenient and economical network and flow rates according to the operation’s requirement. (+)

      Features:

      299622091311839327.jpg
      • Full band coverage, compatible with major operators’ network
      • Industrial grade high speed 4G module, strong wireless communication ability, real-time transmission for volume data
      • WIFI hotspot coverage, high data throughput, providing guarantee for various value-added services
  • Mercury Systems  (1)
    • Ensemble MTI-203
      RapidIO DSP/FPGA signal and video processing AdvancedMC Card for developing and deploying LTE, WiMAX, next-generation video, or basestation applications (+)

      Features:

      34795.jpg
      • High-performance AMC for next-generation mobile broadband applications
      • Supports 20 MHz WiMAX multi-antenna solutions on a single AMC
      • Combined DSP and FPGA technology for optimal application partitioning
  • Ubiqconn Technology  (1)
    • MT7000
      MT7000: a durable, all-in-one vehicle terminal for fleet management, asset management, and Electronic Logging (ELD) applications. The MT7000 offers a high-end seven-inch display and intuitive user interface with a 10-point multi-touch PCT touchscreen. Its backup battery can power the device independently from the car battery; smart power management features automatically turn it on and off to consistently update positioning information while conserving energy. Moreover, Ubiqconn's open API/SDK support allows users to easily develop custom applications. (+)

      Features:

      352586832524815906.jpg
      • Bright 7-inch PCT touch display with intuitive interface
      • Friendly HMI with programmable buttons and voice recognition capability
      • Smart power management, backup battery for reliable data logging
  • Stratex Networks, Inc.  (1)
    • Eclipse Wireless Network Transmission System
      A scalable, nodal wireless transmission system (+)

      Features:

      • Serves backhaul and access applications that had been provided by point-to-point microwave radios
      • Enables wireless network node configurations in the smallest form factor available, supporting up to six independent radio traffic paths from a compact and highly modular Intelligent Node Unit (INU)
      • An integral high speed TDM bus architecture enables traffic routing between traffic paths by software without local cabling
  • Elma Electronic  (1)
    • NetSys-5401 Industrial Cisco Router
      The NetSys-5401 is optimized for mobile and embedded networks that require IP routing and services. Featuring Cisco’s 5915 Embedded Services Router the flexible, compact system provides highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links. The system offers high performance with five Fast Ethernet interfaces (two routed and three switched), and a rich Cisco IOS Software feature set for customers deploying bandwidth-intensive applications in embedded networks in industrial, public safety, transportation, defense, and energy markets. Cisco’s on board hardware encryption provides scalable video, voice, and data services for mobile and embedded outdoor networks. Optional Advanced Enterprise package provides protocol support for Cisco’s Mobile Ready Net features including mobile ad hoc networking and radio aware routing. [...] (+)

      Features:

      334752526621890991.jpg
  • National Instruments  (1)
    • NI Measuremnt Suite
      Software suite that engineers can use with modular RF instrumentation for automated testing of Mobile WiMAX devices (+)

      Features:

      • Based on PXI Express instrumentation powered by multicore technology
      • Performs error vector magnitude (EVM), power and spectral measurements three to five times faster than traditional instruments
      • Typical residual EVM accuracy of -46 dB at 3.5 GHz (-10 dBm)
  • Telit Wireless Solutions Inc.  (1)
    • DE910 Next-Gen CDMA
      Allows M2M developers to leverage the strength of 3G CDMA networks for applications such as consumer electronics, mobile health devices, as well as telematics and mobile computing (+)

      Features:

      • Featuring the same Land Grid Array (LGA) form factor as its globally compatible UMTS/HSPA counterpart, the HE910, the DE910-DUAL module will offer
      • Gives customers the flexibility to connect to two of the most prevalent networks worldwide and experience true global coverage with one core application design
      • Supports this new LGA form factor by further introducing modules into the family format, providing the same logical interfacing and full hardware compatibility among all existing and future members of the family
  • NetCentrex  (1)
    • SVI
      A scalable platform enabling service providers to deploy both core network voice services and value-added revenue-generating services (+)

      Features:

      • Functions as a media server, intelligent peripheral, service node, and edge IVR
      • Supports VoIP, PSTN, and mobile networks
      • Features voice recognition, text-to-speech, H.323 video playback, fax, and conferencing
  • TelcoBridges  (1)
    • TB-Video
      Platform for 3G-324M video streaming applications (+)

      Features:

      31201.jpg
      • ITU-T H.223 Annex A (mobile level 1)
      • ITU-T H.223 Annex B (mobile level 2)
      • ITU-T H.245 version 7
  • Curtiss-Wright  (4)
    • DuraMAR 5915 MIL-STD Rugged Cisco 5915 Mobile IP Router Subsystem with Integrated Gigabit Ethernet S
      The Parvus DuraMAR® 5915 is a rugged Commercial-Off the Shelf (COTS) Cisco IOS-managed secure mobile network router integrating Cisco’s 5915 Embedded Services Router (ESR) card in an ultra-rugged chassis optimized for harsh military and civil vehicle / aircraft installations. A standalone 5-port router model (the “0X Series�) together with subsystem variants integrating Ethernet Switches based on Marvel (“1X Series�), Cisco (“2X Series�) and Vitesse (“3X Series) networking technologies enable users to scale port density up to 23 total Ethernet ports. An ideal solution for IP networking technology refresh and situational awareness applications deployed at the tactical network edge, the DuraMAR 5915 enables prime defense contractors and civil agencies to deploy data, video, and voice services virtually anywhere LAN/WAN connectivity may be required, especially in mobile, airborne, ground, manned or unmanned vehicle and sensor applications. FEATURES: MIL-STD Rugged Cisco 5915 Mobile IP Router Subsystem with Integrated Gigabit Ethernet Switch • Cisco IOS-Managed Embedded Services Router (ESR) in Ultra-Rugged Enclosure • Standalone Router Subsystem or Variants with Integrated Marvel/Cisco/Vitesse Ethernet Switches • Cisco 5915 Advanced Enterprise IOS for Robust Information Assurance, Dynamic Layer 3 IPv4 / IPv6 Routing, QoS Management, Mobile Ad Hoc Networking, Remote Call Manager, Radio Aware Routing (RAR) • Robust Information Assurance: Common Criteria Evaluation and Validation Scheme (CCEVS) EAL2 Certified and Federal Information Processing Standard (FIPS) 140-2 Validation on Cisco 5915 ESR • Integrated Services Router (ISR) Features Support Concurrent Data, Video, and Voice Services, as well as Firewall and Hardware Accelerated AES Encryption/NSA Suite B in IOS • Modular, Open Architecture Rugged COTS PC104 Hardware Design • Extreme MIL-STD-810G Shock, Vibration, Thermal, Altitude, Humidity Conditions (DO-160G Pending for 2X/3X Models) • -40 to +71C Fanless Extended Temp Operation with No Moving Parts [...] (+)

      Features:

    • VPX3-621 Cisco Ethernet Router
      The VPX3-621 from Curtiss-Wright is a versatile, 3U VPX module that delivers the power of Cisco IOS running as an Embedded Services Router (ESR). Designed for mobile and embedded systems, the VPX3-621 Cisco Ethernet Router extends the services of an enterprise router to a rugged embedded platform. With up to four Gigabit Ethernet ports, the VPX3-621 can connect multiple modules or radios to provide LAN and WAN connectivity. (+)

      Features:

      320755829221264759.jpg
      • 3U VPX Cisco Ethernet Router
      • 2-4 Gigabit Ethernet ports for network connectivity
      • Cisco IOS Embedded Services Router with Advanced Enterprise Services feature set
    • DuraNET 30-2020 Rugged Cisco ESS-2020 L2 Ethernet Switch
      The Parvus® DuraNET® 30-2020 is an ultra-rugged 19-port Cisco IOS-managed Layer 2 network switch integrating Cisco’s ESS 2020 Embedded Services Switch technology with an isolated MIL-STD-1275/704 power supply in an IP67 (dust/water proof) sealed aluminum chassis with MIL-DTL-38999 connectors. Designed for Size, Weight and Power (SwaP) sensitive harsh military and civil environments (i.e. aircraft, vehicle, mining, industrial), the unit provides reliable local area network (LAN) switching capabilities with the ease of use, secure access, and manageability expected from Cisco-based technology. Two levels of Cisco IOS software (LAN Lite or LAN Base) are available to support access layer connectivity and needs for data, security, voice, and video traffic at the network edge for stationary or mobile network nodes. FEATURES: Rugged Cisco ESS-2020 L2 Ethernet Switch, 17x 10/100 + 2x GigE Ports • Integrated Cisco ESS 2020 Layer 2 IOS Managed Ethernet Switch with 19x Ethernet Ports (2x GigE, 17x 10/100) in Size, Weight & Power (SWaP) Optimized Chassis: < 5.0 lbs. Weight, Only 3.0� Height, < 20 Watts Power Consumption • Cisco IOS LAN Lite or Cisco IOS LAN Base Images Provide Robust Layer 2 Switching, Management, Security, and Quality of Service Features IOS Management • Cisco IOS® with Data, Video, and Voice Services Support • Security: Dot1x, Port Security, and DHCP Allow Dynamic Port-Based Authentication, Secure Shell (SSHv2), SNMPv3 Provides Encrypted Administrator Traffic During Telnet and SNMP Sessions, TACACS+ and RADIUS Authentication Facilitate Centralized Control and Restrict Unauthorized Users • Resiliency: Flex Links for Fast Recovery, Cisco REP Protocol for Fast Convergence, Rapid/Multiple Spanning Tree Redunancy, Link Aggregation • Manageability: Auto SmartPort, Cisco Web Device Manager, Telnet, HTTPS access, SNMP, Storm Control, IGMP Snooping, VLAN, and CoS/QoS Traffic Prioritization Rugged MIL-STD Design • Designed to Meet Harsh MIL-STD-810G and DO-160G Conditions (Temp, Shock, Vibration, Humidity, Altitude, Dust/Water Ingress) • Designed to Meet MIL-STD-461F and DO-160G EMI/EMC (Conducted & Radiated Emissions & Susceptibility) and MIL-STD-1275 & 704 Power Input and Transient Protections • Filtered, Transient-Protected Power Supply for Aircraft and Vehicle Use • Extended Temperature, Open Architecture PC104 Sized Circuit Card Assemblies with Cable-Less Internal Interconnect for Shock & Vibration Extremes • -40 to +71C Fanless Extended Temp Operation with No Moving Parts • Corrosion-Resistant, Aluminum Chassis Sealed (IP67) Against Water, Dust, EMI [...] (+)

      Features:

    • DuraMAR 31-5915 IP67 Rugged Cisco 5915 Mobile IP Router
      The Parvus® DuraMAR® 31-5915 is a rugged Cisco IOS-managed mobile router designed to extend enterprise networking infrastructure beyond the reach of traditional fixed-networks into mobile and embedded networking applications. With Cisco’s 5915 Embedded Services Router (ESR) card, isolated vehicle-grade power supply, and fully dust and water proof (IP67) enclosure, the DuraMAR 31-5915 is an ideal mobile networking solution to interface with onboard computers, cameras, Ethernet switches, sensors, monitoring devices, and command-and-control gear in harsh environment and vibration environments, including tactical, mobile, vehicle, and outdoor installations in transportation, military, offshore drilling, underground mining, smart grid, homeland security, and public safety applications. FEATURES: Rugged IP67 Rugged Cisco 5915 Mobile IP Router with RJ-45 or M12 Connectors • Ruggedized Cisco 5915 Router with Enterprise IOS Software for Robust Security, Management, QoS, VLAN, IPv4 / IPv6 Routing, IP Mobility • 5 Ethernet Ports (3x 10/100 Switched, 2x 10/100 Routed) • Integrated Services Router (ISR) Features Support Concurrent Data, Video, and Voice Services, Firewall and Hardware AES Encryption Acceleration • Modular, Open Architecture Rugged COTS PC104 Hardware Design • -40 to +71C Fanless Extended Temp Operation with No Moving Parts • Rugged RJ-45 or M12 Connectors for Anti-Shock and Vibe Protection [...] (+)

      Features:

  • Extreme Engineering Solutions (X-ES)  (2)
    • Cisco® 5940
      The Cisco® 5940 Embedded Services Router (ESR) is optimized for mobile and embedded networks that require IP routing and services. The CompactPCI form factor complemented by Cisco IOS® Software and Cisco Mobile Ready Net capabilities, provide highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links. (+)

      Features:

      209658854022739523.jpg
      • Runs Cisco IOS software
      • Four integrated 10/100/1000 Ethernet ports
      • Cisco Unified Communications Manager Express (CME) support
    • SFFR
      The small form factor router (SFFR) runs Cisco IOS Software with Cisco Mobile Ready Net capabilities, providing highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links. This high-performance, ruggedized, packaged router is designed for applications with the most severe Size, Weight and Power (SWaP) constraints and are deployed in harsh environments. (+)

      Features:

      205854274022673632.jpg
      • Runs Cisco IOS software
      • Cisco Unified Communications Manager Express (CME) support
      • Cisco Mobile Ready Net, which allows for mobile ad hoc networking and radio aware routing
  • Fractus Antennas  (4)
    • ALL mXTEND
      The ALL mXTENDTM Antenna Booster has been specifically designed for providing multiband performance in wireless devices (in particular in mobile devices), enabling worldwide coverage by allowing operation in the communication standards GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500, LTE2600. (+)

      Features:

      364169270898439668.jpg
      • Bands: GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500, LTE2600
      • Dimensions: 24.0 mm x 12.0 mm x 2.0 mm
      • Off the shelf
    • BAR mXTEND
      The BAR mXTENDTM Antenna Booster has been specifically designed for providing multiband performance in wireless devices (in particular in mobile devices), enabling worldwide coverage by allowing operation in the communication standards GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500 and LTE2600. (+)

      Features:

      364170101898226327.jpg
      • Bands: GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500 and LTE2600
      • Dimensions: 10.0 mm x 3.2 mm x 3.2 mm
      • Off the shelf
    • RUN mXTEND
      The RUN mXTENDTM Antenna Booster has been specifically designed for providing multiband performance in wireless devices (in particular in mobile devices), enabling worldwide coverage by allowing operation in the communication standards GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500, LTE2600, LTE3500 and LTE3700. (+)

      Features:

      364169536898682741.jpg
      • Bands: GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500, LTE2600, LTE3500 and LTE3700
      • Dimensions: 12.0 mm x 3.0 mm x 2.4 mm
      • Off the shelf
    • CUBE mXtend
      The mXTEND Antenna Booster has been specifically designed for providing multiband performance in wireless devices (in particular in mobile devices), enabling worldwide coverage by allowing operation in the communication standards GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500 and LTE2600 (+)

      Features:

      364111003898422917.jpg
      • Bands: GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500 and LTE2600
      • Dimensions: 5.0 mm x 5.0 mm x 5.0 mm
      • Off the shelf
  • Aeroflex Laboratories, Inc.  (1)
    • GSM EDGE
      GSM/EDGE measurement suite (+)

      Features:

      • Complete set of OCX measurement functions to analyze mobile transmitter performance
      • Library of ActiveX controls with support for LabVIEW, LabWindows, Visual C, Visual Basic and C++
      • Analysis of GSM/EDGE signal characteristics such as average RF power, burst profile, modulation quality, frequency error and spectrum due to modulation and switching [...]
  • Audience  (1)
    • eS310 Chip
      Latest generation earSmart voice processor that delivers wideband high-definition (HD) voice quality, while suppressing background noise (+)

      Features:

      • Wideband and Narrowband Noise Suppression – the only processor that suppresses wideband stationary and non-stationary background noise, from both ends of a mobile call, for clear communications in any environment, across all mobile phone applications and usage modes
      • Wideband HD Listening Experience – delivers a wideband HD voice listening experience for mobile users connected to 2G and 3G mobile networks
      • Wideband Handheld Speakerphone Non-Stationary Noise Suppression – provides non-stationary noise suppression for handheld speaker phone applications, improving clarity for video calling, VoIP, voice memos, and more
  • NMS Communications Corporation  (1)
    • Vision Video Gateway
      Supports real-time bidirectional streaming of video sessions between 3G-324M-enabled mobile phones and multiple IP-based mobile video applications (+)

      Features:

      • Bridge video services between mobile networks supporting 3G-324M and broadband SIP/IP networks
      • High-performance, low latency support for real-time conversational and interactive services
      • Seamless integration with the separately available Vision Video Transcoder to support transcoding between heterogeneous video and audio codec environments
03/24/23 02:30
Close

Subscribe to Embedded Wireless updates