Embedded Wireless

Showing results for: mesh networking
Refine Embedded Wireless companies and products:
embedded wireless m2m onstar lte wimax white-space near-field communications nfc wireless 802.11 wi-fi zigbee 802.15 802.15 4 module 802.15.4 airbee airbee wireless cc2420 cc2430 chipcon cc2420 compxs em2420 home automation homerf ieee 802.15 ieee 802.15 4 ieee802.15.4 long range wireless mc13191 mc13192 mesh networking module radio rf modems rf module rf modules rf receiver rf transceivers rf transmitter wireless remote control wireless sensors wpan wpans zdo zig bee zigbee-ready zigby zmd wireless sensor networks wireless sensor network
Click on any vendor
to see a listing of
mesh networking related products.
  • Radisys Corporation  (13)
    • ATCA 10GbE System
      AdvancedTCA 10 GbE traffic management and security system delivers very high performance deep packet inspection capabilities to allow TEMs to rapidly develop and deploy content-aware platforms (+)

      Features:

      33077.jpg
      • -Deep Packet Inspection for Content-Aware Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Deep Packet Inspection: Multi-core, multi-threaded MIPS64 processor -Integrated 10 Gbps security acceleration engine
    • 10 GbE ATCA Traffic Management System
      Deep packet inspection for content-aware infrastructure (+)

      Features:

      34178.jpg
      • Multicore, multithreaded MIPS64 processor
      • Integrated 10 Gbps security acceleration engine
      • Packet inspection and distribution engine
    • ATCA 1GbE System
      Bladed compute system provides a very high capacity solution with up to 10 Dual-Core Intel Xeon Processor LV compute nodes in a 5U chassis (or 24 compute nodes in a 12U chassis) (+)

      Features:

      33078.jpg
      • High Performance Platform for IMS and NGN Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Processing: Up to 24 Dual-Core low voltage compute nodes
    • Enhanced OS-9 v3.0
      An updated version of OS-9 that supports more than 10 SBCs ranging from CompactPCI and reference designs to VME and MBX (+)

      Features:

      • POSIX compliant
      • Suitable for use in high-availability networking and communications equipment, digital television, Internet equipment, industrial process and control applications
      • Incorporates an integrated communications framework providing the ability to add or replace protocol stacks without disturbing the application
    • Enhanced OS-9 for PowerPC v1.3
      This OS-9 version supports more than 10 SBCs ranging from CompactPCI and reference designs to VME and MBX (+)

      Features:

      • Suitable for use in high-availability networking and communications equipment, digital television, Internet equipment, industrial process, and control applications
      • Incorporates an integrated communications framework providing the ability to ad or replace protocol stacks without disturbing the application
      • A patented dynamic downloading feature enables high availability approaching 100%, even during product maintenance
    • cPCI 1GbE System
      Provides high capacity computing solution with up to 38 Core 2 Duo dual core compute nodes, each of which is supported by its own local memory and I/O to maximize performance (+)

      Features:

      33079.jpg
      • -High-Performance Platform for IMS and NGN Infrastructure
      • Pre-Packaged with Trillium Protocol Software
      • Up to 38 Core 2 Duo (Dual Core) low voltage compute nodes
    • ARTIC 2000
      PCI carrier card platform that enables flexibility and scalability for intelligent PMC cards for Wide Area Networking (WAN) and telecom applications (+)

      Features:

      33897.jpg
      • Motorola MPC8260 PowerQUICC II PowerPC processor operating at 200 MHz
      • Tundra PowerSpan dual PCI to PowerPC bus switch
      • 32 MB of 64-bit access SDRAM options
    • ARTIC 2200
      High-performance PCI carrier card platform that enables flexibility and scalability for intelligent PMC cards for Wide Area Networking (WAN) and telecom applications (+)

      Features:

      33900.jpg
      • Motorola MPC8280 PowerQUICC II PowerPC processor operating at 400 MHz
      • Tundra PowerSpan dual PCI to PowerPC bus switch
      • 128 MB SDRAM 64-bit access
    • Microware OS-9
      A real-time operating system with IPv6 support for ARM, Intel StrongARM and Hitachi processors (+)

      Features:

      14117.jpg
      • Modular dual IPv4/IPv6 enabled network stack implemented with SoftStax networking framework
      • Based on NetBSD v1.5.1 [...]
    • Microware OS-9 for MBX
      Integrated system software and development tool package specifically for Motorola MBX821 and MBX860 Entry and Standard version boards (+)

      Features:

      • Scalable OS-9-based RTOS architecture with multitasking real-time OS-9 kernel, flexible networking using mwSoftStax, TCP/IP support, mwMAUI multimedia support, LCD, SVGA/VGA, PCMCIA support by SystemSoft
      • Full C/C++ IDE for Windows with Codewright Editor/Project Manager, FasTrak Debugger, and Ultra C/C++ Compiler [...]
    • 1GbE ComputeSystem
      3rd generation NEBS-compliant Flex21 supporting 90 W per slot (+)

      Features:

      36002.jpg
      • 1 GbE backplane fabric and TDM backplane
      • Integrated shelf managers with IPMI & console connectivity
      • Trillium protocol packages for IMS & NGN
    • Promentum ATCA-6006
      5U ATCA shelf with 4 node slot and 2 hub slots (+)

      Features:

      • Blades lie horizontally and are cooled by two hot-swappable fan units on either side of the shelf, working in a push-pull arrangement to draw air across the blades from right to left
      • The backplane is configured with the two hub slots on the bottom and 4 node slots above them
      • Backplane is a full mesh, supporting dual-star fabric (base & fabric) with dual IPMB busses for management
    • PROMENTYUM SYS-6006
      5U 6-slot AdvancedTCA Application Ready Platform (+)

      Features:

      44282.jpg
      • 4 node slot & 2 hub slots
      • Blades lie horizontally and are cooled by two hot-swappable fan units on either side of the shelf, working in a push-pull arrangement to draw air across the blades from right to left
      • The backplane is configured with the two hub slots on the bottom and 4 node slots above them
  • Telco Systems  (4)
    • T-HUB4
      40G ATCA switch blade to enable next generation mobile applications such as LTE and 4G as well as metro Ethernet, security, and military applications that require high performance and high availability (+)

      Features:

      • Telco Systems' T-HUB4 delivers simultaneous 10G and 40G connectivity to support AdvancedTCA service modules
      • T-HUB4 delivers an extensive networking software suite, BiNOX to provide state of the art connectivity, including switching, IPv4/IPv6 routing, MPLS, QoS, protection and redundancy, and clock synchronization to the ATCA platform
      • BiNOX is Telco Systems' field-proven, carrier grade networking operating system offering superior control and security while delivering wire speed Layer 2-4 networking
    • T-Marc 300
      Multi-port customer-located demarcation device (+)

      Features:

      33497.jpg
      • Extensive management and test features for Ethernet, MPLS/VPLS, and IP networks
      • Purpose-built demarcation and service extension capabilities
      • Suited for inter-provider deployment
    • T-HUB1
      GbE base interface with 2x 10 GbE uplinks (+)

      Features:

      32845.jpg
      • GbE and 1/2/4 Gbps Fibre Channel Fabric interface with 4x10 GbE uplinks
      • Separate Base and Fabric Interface Switching and CPU to provide enhanced security and protection
      • IPv4 and IPv6 switching on both BI and FI
    • T6Pro Classic/Compact
      A carrier-class, multilayer routing switch optimized for metro and aggregation applications. T6Pro implements the full scope of the latest AdvancedTCA architecture (+)

      Features:

      20355.jpg
      • Available in two non-blocking chassis configurations – T6Pro Compact is 4RU and T6Pro Classic is 12RU (stackable as 10RU).
      • 10/100/1000 and 10 Gigabit Ethernet copper and fiber
      • Rapid spanning tree ensures
  • 6WIND  (1)
    • 6WINDGate Software
      6WIND is the only commercial supplier of packet processing software for networking and telecom platforms (+)

      Features:

      • The 6WINDGate networking stack is optimized for multicore platforms
      • 10x performance improvement compared to standard networking stacks
      • Enables 50% reduction in system power consumption
  • Elma Electronic  (2)
    • Network Switching and Routing Product Family
      If proven performance in demanding applications is what you look for in an Ethernet switch, Elma has the answer. Our Ethernet switches and routing engines perform in a wide range of applications. Address your networking requirements with the broadest and most technologically advanced family of networking products on the embedded market. Elma offers solutions for high speed networking in defense, industrial, medical and telecommunication systems. Based on the latest silicon available from Marvell, our Interface Concept line of products have been serving critical roles in defense programs as well as key industrial installations for over twelve years. Models support basic switching up to the latest layer 3 routing protocols. Our Switchware™ graphical user interface (GUI) makes network management simple with an easy to use interface enabling network optimization, analytics and troubleshooting. All Ethernet switching products are supported through our Pennsylvania office by one of the most experienced staffs in the industry. Customization is available at low volumes. We also provide custom packaging and backplane designs along with thermal analysis for system platforms as well as complete integration and system design support. Look to Elma’s Interface Concept line of networking products for the speed, scalability, reliability and security your systems require. (+)

      Features:

      343550971122811129.jpg
      • 12 year track record of solid performance, reliability and longevity in defense applications
      • 3U, 6U, mezzanine and custom chassis solutions including SFF and 19â€? rackmount
      • VPX, VME, cPCI, cPCI serial, mezzanine and PCI/104 versions
    • NetSys-5401 Industrial Cisco Router
      The NetSys-5401 is optimized for mobile and embedded networks that require IP routing and services. Featuring Cisco’s 5915 Embedded Services Router the flexible, compact system provides highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links. The system offers high performance with five Fast Ethernet interfaces (two routed and three switched), and a rich Cisco IOS Software feature set for customers deploying bandwidth-intensive applications in embedded networks in industrial, public safety, transportation, defense, and energy markets. Cisco’s on board hardware encryption provides scalable video, voice, and data services for mobile and embedded outdoor networks. Optional Advanced Enterprise package provides protocol support for Cisco’s Mobile Ready Net features including mobile ad hoc networking and radio aware routing. [...] (+)

      Features:

      334752526621890991.jpg
  • Prodrive Technologies  (1)
    • Prodrive ATCA carrier & switch blades
      Prodrive Technologies' RapidIO Gen.2 carrier (PRIOC-G2), RapidIO Gen.2 switch (PRIOSB-G2) and 10/40G Ethernet (PESB) offer flexible switching solutions in the AdvancedTCA form factor. Regardless of the networking requirements, Prodrive has the right switching solution available.Mainstream 10 and 40 Gigabit Ethernet allows integration of mainstream server blades, and linking them together in a non-blocking topology. The Ethernet blade supports open networking software to maximize value and minimize time to market.Low latency Serial RapidIO switching supports hard real-time system use cases at 100ns latency per switch, while offering 20 Gigabit per second per port in a non-blocking architecture. Two up to fourteen channels towards the backplane allow for maximum scalability within any AdvancedTCA chassis type. On the front panel, up to four 80W full-size AMC sites are supported. In addition, AMC sites can be exchanged for front connectivity using small form-factor pluggable (SFP+) or quad small form-factor pluggable (QSFP) connectors, supporting up to two meters of passive copper cabling. All blades support a Gigabit Ethernet management network as well as an IPMI utility network, to control and manage the switches out-of-band.This hardware portfolio is complemented with Prodrive's powerful, award-winning network visualization software enables customers to quickly identify hot spots in network utilization and latency, reducing customer's time-to-market. (+)

      Features:

      332725022663399807.jpg
      • Up to four 80W full-size AMC sites
      • Up to 2x QSFP, 8x SFP+ front panel connector
      • RapidIO: Serial RapidIO 2.1, up to 20Gbps per port
  • Dust Networks  (2)
    • SmartMesh XD
      Provides OEMs with highly reliable, ultra low-power and easy to integrate wireless sensor networking solutions (+)

      Features:

      • Ultra low-power RF technology
      • Innovative radio design consumes 80 percent less power than comparable radios
      • Delivers additional 5X increase in battery life
    • SmartMesh IA-510
      Wireless sensor networking system delivers embedded WirelessHART solutions to industrial automation vendors that are easy to integrate and simple to deploy (+)

      Features:

      • WirelessHART compliance: Interoperability with other WirelessHART field devices and gateways
      • Superior reliability:
      • >99.99 percent reliability, even in the most challenging industrial environments
  • Curtiss-Wright  (11)
    • DuraMAR 5915 MIL-STD Rugged Cisco 5915 Mobile IP Router Subsystem with Integrated Gigabit Ethernet S
      The Parvus DuraMAR® 5915 is a rugged Commercial-Off the Shelf (COTS) Cisco IOS-managed secure mobile network router integrating Cisco’s 5915 Embedded Services Router (ESR) card in an ultra-rugged chassis optimized for harsh military and civil vehicle / aircraft installations. A standalone 5-port router model (the “0X Series�) together with subsystem variants integrating Ethernet Switches based on Marvel (“1X Series�), Cisco (“2X Series�) and Vitesse (“3X Series) networking technologies enable users to scale port density up to 23 total Ethernet ports. An ideal solution for IP networking technology refresh and situational awareness applications deployed at the tactical network edge, the DuraMAR 5915 enables prime defense contractors and civil agencies to deploy data, video, and voice services virtually anywhere LAN/WAN connectivity may be required, especially in mobile, airborne, ground, manned or unmanned vehicle and sensor applications. FEATURES: MIL-STD Rugged Cisco 5915 Mobile IP Router Subsystem with Integrated Gigabit Ethernet Switch • Cisco IOS-Managed Embedded Services Router (ESR) in Ultra-Rugged Enclosure • Standalone Router Subsystem or Variants with Integrated Marvel/Cisco/Vitesse Ethernet Switches • Cisco 5915 Advanced Enterprise IOS for Robust Information Assurance, Dynamic Layer 3 IPv4 / IPv6 Routing, QoS Management, Mobile Ad Hoc Networking, Remote Call Manager, Radio Aware Routing (RAR) • Robust Information Assurance: Common Criteria Evaluation and Validation Scheme (CCEVS) EAL2 Certified and Federal Information Processing Standard (FIPS) 140-2 Validation on Cisco 5915 ESR • Integrated Services Router (ISR) Features Support Concurrent Data, Video, and Voice Services, as well as Firewall and Hardware Accelerated AES Encryption/NSA Suite B in IOS • Modular, Open Architecture Rugged COTS PC104 Hardware Design • Extreme MIL-STD-810G Shock, Vibration, Thermal, Altitude, Humidity Conditions (DO-160G Pending for 2X/3X Models) • -40 to +71C Fanless Extended Temp Operation with No Moving Parts [...] (+)

      Features:

    • Parvus DuraWORX 10-10 Rugged Multi-function Computing & Networking Subsystem
      The Parvus DuraWORX® 10-10 is an ultra-rugged multi-function computing and networking system that combines a high performance Intel Core i7-based mission processor and a Cisco 5915 IOS-managed secure network router into a single modular platform designed for extended temperature, high shock & vibration environments. Integrating the capabilities of Curtiss-Wright's DuraCOR 80-40 computer and DuraMAR 5915 router subsystems together with options for DuraNET Ethernet switching and PCIe104 I/O card expansion, the DuraWORX 10-10 is a scalable, all-in-one computing appliance aimed at reducing Size, Weight & Power (SWaP) and simplifying systems integration (thermal, cabling, power, installation) in tactical computing, IP networking and situational awareness applications. DuraWORX capabilities enable functional subsystem consolidation and reduction in the number of Line Replaceable Units (LRUs). FEATURES: Combined High Performance Rugged Multi-core x86 Computer and IP Network Router System CPU: Intel Core i7 Processor, 2.2 GHz, Dual-Core, 8 GB DRAM, Integrated GPU Cisco 5915 IOS-Managed Router with Enterprise IOS Software for Robust Security, Management, QoS, VLAN, IPv4 / IPv6 Routing, IP Mobility Connectivity & I/O: Gigabit Ethernet LAN Interface, 6x USB 2.0, 2x RS-232 Serial, 16x Discrete DIO, VGA & HDMI Video, Stereo Audio, PS2 Storage: Dual Slots for Removable 2.5’’ SATA Solid State Disks Expandable: Modular Interlocking Chassis Design Supports Stackable PCIe104 I/O Card Expansion for High Speed Interconnect (2-3 Card Slots Per Expansion Chassis Segment, i.e. MIL-STD-1553/429, DIO, FPGA, Frame Grabber) [...] (+)

      Features:

    • DuraWORX 10-10 Rugged Multi-function Computing & Networking Subsystem
      The Parvus DuraWORX® 10-10 is an ultra-rugged multi-function computing and networking system that combines a high performance Intel Core i7-based mission processor and a Cisco 5915 IOS-managed secure network router into a single modular platform designed for extended temperature, high shock & vibration environments. Integrating the capabilities of Curtiss-Wright's DuraCOR 80-40 computer and DuraMAR 5915 router subsystems together with options for DuraNET Ethernet switching and PCIe104 I/O card expansion, the DuraWORX 10-10 is a scalable, all-in-one computing appliance aimed at reducing Size, Weight & Power (SWaP) and simplifying systems integration (thermal, cabling, power, installation) in tactical computing, IP networking and situational awareness applications. DuraWORX capabilities enable functional subsystem consolidation and reduction in the number of Line Replaceable Units (LRUs). FEATURES: Combined High Performance Rugged Multi-core x86 Computer and IP Network Router System CPU: Intel Core i7 Processor, 2.2 GHz, Dual-Core, 8 GB DRAM, Integrated GPU Cisco 5915 IOS-Managed Router with Enterprise IOS Software for Robust Security, Management, QoS, VLAN, IPv4 / IPv6 Routing, IP Mobility Connectivity & I/O: Gigabit Ethernet LAN Interface, 6x USB 2.0, 2x RS-232 Serial, 16x Discrete DIO, VGA & HDMI Video, Stereo Audio, PS2 Storage: Dual Slots for Removable 2.5’’ SATA Solid State Disks Expandable: Modular Interlocking Chassis Design Supports Stackable PCIe104 I/O Card Expansion for High Speed Interconnect (2-3 Card Slots Per Expansion Chassis Segment, i.e. MIL-STD-1553/429, DIO, FPGA, Frame Grabber) [...] (+)

      Features:

    • DuraMAR 31-5915 IP67 Rugged Cisco 5915 Mobile IP Router
      The Parvus® DuraMAR® 31-5915 is a rugged Cisco IOS-managed mobile router designed to extend enterprise networking infrastructure beyond the reach of traditional fixed-networks into mobile and embedded networking applications. With Cisco’s 5915 Embedded Services Router (ESR) card, isolated vehicle-grade power supply, and fully dust and water proof (IP67) enclosure, the DuraMAR 31-5915 is an ideal mobile networking solution to interface with onboard computers, cameras, Ethernet switches, sensors, monitoring devices, and command-and-control gear in harsh environment and vibration environments, including tactical, mobile, vehicle, and outdoor installations in transportation, military, offshore drilling, underground mining, smart grid, homeland security, and public safety applications. FEATURES: Rugged IP67 Rugged Cisco 5915 Mobile IP Router with RJ-45 or M12 Connectors • Ruggedized Cisco 5915 Router with Enterprise IOS Software for Robust Security, Management, QoS, VLAN, IPv4 / IPv6 Routing, IP Mobility • 5 Ethernet Ports (3x 10/100 Switched, 2x 10/100 Routed) • Integrated Services Router (ISR) Features Support Concurrent Data, Video, and Voice Services, Firewall and Hardware AES Encryption Acceleration • Modular, Open Architecture Rugged COTS PC104 Hardware Design • -40 to +71C Fanless Extended Temp Operation with No Moving Parts • Rugged RJ-45 or M12 Connectors for Anti-Shock and Vibe Protection [...] (+)

      Features:

    • SWI-22-10 Fully Managed Switch PCI/104-Express Card
      The SWI-22-10 is a rugged Commercial Off the Shelf (COTS) Gigabit Ethernet switch card optimized for Size, Weight and Power (SwaP) sensitive embedded military and civilian computer network systems applications. Featuring advanced Layer 2 networking features with up to 20 ports of 10/100/1000Mbps connectivity, an integrated management processor, low power consumption, and robust carrier Ethernet software features, the SWI-22-10 enables reliable local area network (LAN) switching across extended operating temperature ranges (-40 to +85C) and extreme shock/vibration for technology refresh and new system designs. With a compact PCI/104-Express form factor (approx. 3.6� x 3.8�) featuring either eight (8) or twenty (20) ports of 1000BaseT Ethernet, the SWI-22-10 is one of the smallest rugged Gigabit Ethernet switches available and an ideal solution for connecting a large number of IP-enabled embedded devices, including computers, cameras, sensors, and command-and-control equipment deployed in manned and unmanned system platforms at the network edge. FEATURES: Up to 20 Ports of Gigabit Ethernet Switch Ports in Single-Slot PCI/104-Express Form Factor (3.6�x3.8�) Card; Eight (8) Port Option Layer 2 Switch with 10/100/1000 Mbps Gigabit Ethernet Connectivity, IPv4 / IPv6 Multicast, VLAN, QoS / CoS Traffic Prioritization, Multiple/Rapid Spanning Tree, Link Aggregation, IEEE-1588 Can be Powered via PCI-104 (PCI) bus, PCIe104 (PCI Express) bus or Auxiliary Power Connector for Standalone Operation Layer 3 IPv4 / IPv6 Unicast Static Routing Support for IP Routing to Attached WAN / Radio Ports [...] (+)

      Features:

    • VPX3-671
      The VPX3-671 continues Curtiss-Wright’s commitment to the US Army’s VICTORY initiative by bringing the power and feature set of our Digital Beachhead™ VICTORY Ethernet Switch and Vehicle Management Computer into a 3U Line Replaceable Module (LRM) format. By combining the power of a fully-featured 12-port gigabit Ethernet switch with a general purpose single board computer (SBC), the VPX3-671 is the industry’s first and only single-slot solution providing the essential foundations to implement a VICTORY architecture in today’s modern networked vehicle. (+)

      Features:

      298979734861710469.jpg
      • VICTORY Ethernet Switch
      • 12-port managed Gigabit Ethernet switch
      • Feature-rich networking support includes IPv4/v6 support, VLANs, IGMP multicast, QoS, MSTP/RSTP, link aggregation, port mirroring, jumbo frames and static routing for WAN connectivity
    • DuraNET 20-10 Rugged 20-Port Gigabit Ethernet Switch System
      The Parvus® DuraNET® 20-10 rugged Commercial Off the Shelf (COTS) Gigabit Ethernet switch subsystem is optimized for Size, Weight, Power and Cost (SwaP-C) sensitive embedded military and civilian computer network systems applications. Featuring advanced Layer 2 networking features with 20 ports of non-blocking wire-speed 10/100/1000Mbps connectivity, an integrated management processor and extremely low power consumption, the DuraNET 20-10 enables reliable local area network (LAN) switching across extended operating temperature ranges (-40 to +71C) and extreme shock/vibration conditions for technology refresh and new platforms, including mobile, tactical, aerospace, and ground vehicle applications. FEATURES: 20-Ports of 10/100/1000Mbps Gigabit Ethernet Switch System in Size, Weight & Power (SWaP) Optimized Chassis: Approx. 4 lbs. Weight, < 3� Height, < 20W Max Power for 20 Ports of GigE Layer 2 Switch Management: 10/100/1000 Mbps Gigabit Ethernet Connectivity, IPv4 / IPv6 Multicast, VLAN, QoS/CoS Traffic Prioritization, Multiple/Rapid Spanning Tree, Link Aggregation, IEEE-1588 Precision Timing Protocol Layer 3 IPv4 / IPv6 Unicast Static Routing Support for IP Routing to Attached WAN / Radio Ports SNMPv3, HTTP Server, Web GUI, RS-232 Console CLI, Port Monitoring, RMON, Syslog, Network Access Server (NAS), 802.1X Authentication, IGMP Snooping, Access Control Lists (ACLs), Zeroization, Built-in-Test (BIT) Diagnostics Designed to Meet Harsh MIL-STD-810G & DO-160G Conditions [...] (+)

      Features:

    • DuraNET 20-10 Rugged 20-Port Gigabit Ethernet Switch System
      The Parvus® DuraNET® 20-10 rugged Commercial Off the Shelf (COTS) Gigabit Ethernet switch subsystem is optimized for Size, Weight, Power and Cost (SwaP-C) sensitive embedded military and civilian computer network systems applications. Featuring advanced Layer 2 networking features with 20 ports of non-blocking wire-speed 10/100/1000Mbps connectivity, an integrated management processor and extremely low power consumption, the DuraNET 20-10 enables reliable local area network (LAN) switching across extended operating temperature ranges (-40 to +71C) and extreme shock/vibration conditions for technology refresh and new platforms, including mobile, tactical, aerospace, and ground vehicle applications. FEATURES: 20-Ports of 10/100/1000Mbps Gigabit Ethernet Switch System in Size, Weight & Power (SWaP) Optimized Chassis: Approx. 4 lbs. Weight, < 3� Height, < 20W Max Power for 20 Ports of GigE Layer 2 Switch Management: 10/100/1000 Mbps Gigabit Ethernet Connectivity, IPv4 / IPv6 Multicast, VLAN, QoS/CoS Traffic Prioritization, Multiple/Rapid Spanning Tree, Link Aggregation, IEEE-1588 Precision Timing Protocol Layer 3 IPv4 / IPv6 Unicast Static Routing Support for IP Routing to Attached WAN / Radio Ports SNMPv3, HTTP Server, Web GUI, RS-232 Console CLI, Port Monitoring, RMON, Syslog, Network Access Server (NAS), 802.1X Authentication, IGMP Snooping, Access Control Lists (ACLs), Zeroization, Built-in-Test (BIT) Diagnostics Designed to Meet Harsh MIL-STD-810G & DO-160G Conditions [...] (+)

      Features:

    • DuraWORX 8043 Mission Computer
      The Parvus DuraWORX 8043 is an ultra-rugged multi-function computing and networking system that combines a high performance 6th Gen Skylake Intel Mobile Xeon E3 v5-based mission processor and a Cisco 5915 IOS-managed secure network router into a single modular platform designed for highly demanding thermal, shock, and vibration environments. The DuraWORX 8043 is a scalable, rugged, SWaP-optimized system that simplifies system integration in tactical computing, IP networking and situational awareness applications. (+)

      Features:

      364717785405722756.jpg
      • SWaP-optimized Intel mission processor and Cisco IP Router
      • 2.8 GHz quad-core 6th Gen Intel Xeon processor + Cisco 5915 ESR router
      • Modular I/O architecture: options for integrated Ethernet switch and MiniPCIe or PCIe/104 I/O cards
    • VPX6-684 FireBlade II
      6U VPX GbE multi-layer switch/router board (+)

      Features:

      • Specifically designed for networking in extremely harsh environments
      • Switching and routing capabilities
      • VITA 48 REDI two-level maintenance options
    • RVP Tracker
      A radar tracking system that supports moving platforms, including ship and airborne (+)

      Features:

      17474.jpg
      • Provides an integrated capability for automatic target tracking from primary radar video
      • Can be interfaced with a variety of radar types, including ACP/AARP, RADDS, ASDE-3, and specialized serial and parallel formats
      • Incorporates clutter-processing algorithms that provide enhanced signal quality for the plot extraction and tracking
  • Extreme Engineering Solutions (X-ES)  (9)
    • XPand6207
      The XPand6207 is a Commercial-Off-The-Shelf (COTS) Rugged 10 Gigabit Ethernet switch and router that maximizes performance while minimizing SWaP. With a compact design and weighing less than nine pounds, the XPand6207 is the smallest available truly rugged 10 Gigabit Ethernet switch to support this amount of networking performance and functionality. The XPand6207 is the first rugged Ethernet switch to support 10 Gigabit Ethernet using the 10GBASE-T protocol. This eliminates the need for large and expensive optical transceivers to support 10 Gigabit Ethernet between enclosures. FEATURES: Rugged 10 Gigabit Ethernet switch Six 10GBASE-T 10 Gigabit Ethernet ports Twelve 10/100/1000BASE-T Gigabit Ethernet ports Optional XPedite5205 Cisco® IOS™ Gigabit Ethernet Embedded Services Router Optional Layer 2 switching and Layer 3 routing management with extensive IEEE protocol and IETF RFC support Optional VICTORY Infrastructure Switch and Router support Small Form Factor (SFF) sub-� ATR system Conduction- or convection-cooled chassis Physical dimensions of 4.88 in. (W), 3.61 in. (H), 8.90 in. (L) Includes two XChange3018 10 Gigabit Ethernet switches Integrated 28 VDC power supply MIL-STD-461 E/F EMI filtering Environmentally sealed Circular connector support [...] (+)

      Features:

    • XPand4206
      The XPand4206 is a high-performance computing and networking platform for environmentally demanding, SWaP-restricted avionics and vetronics applications. The XPand4206 LRU maximizes processing performance with three quad-core Intel® Core™ i7 processors, each capable of operating at up to 2.1 GHz. The XPand4206 provides a number of external I/O interfaces, including three 10 Gigabit Ethernet interfaces for high-throughput communication with other systems and sensors. The system also provides twelve high-speed CAN bus 2.0 A/B channels, twelve Gigabit Ethernet ports, sixteen serial ports, and six USB ports. FEATURES: Sub-� ATR footprint: 4.88 in. (W), 8.3 in. (L), 7.36 in (H) 3U OpenVPX-based (VITA65) architecture Three quad-core Intel® Core™ i7 processors Intel® Active Management Technology (AMT) support Toolless, high-reliability, removable SSD memory modules 10 Gigabit Ethernet switched fabric Three external 10 Gigabit Ethernet interfaces Optional Layer 2 managed and Layer 3 routed network fabric Twelve high-speed CAN bus 2.0 A/B channels Twelve external Gigabit Ethernet ports Sixteen serial ports Six USB ports 28 VDC MIL-STD-1275 or MIL-STD-704 input power [...] (+)

      Features:

    • XPand6208
      The XPand6208 is a true Commercial-Off-The-Shelf (COTS) rugged system based on the 4th Generation Intel® Core™ i7 (formerly Haswell) processor and a 10 Gigabit Ethernet switch. With a compact design and weighing less than nine pounds, the XPand6208 maximizes processing and networking performance while minimizing SWaP. The XPand6208 provides a SWaP-optimized alternative to traditionally larger slot-based systems; it is an actual Small Form Factor system based on COTS 3U VPX modules. FEATURES: 4th Gen Intel® Core™ i7-based processor (formerly known as Haswell) Optional XPedite5205 Cisco® IOS™ Gigabit Ethernet Embedded Services Router 10 Gigabit Ethernet switch Optional Layer 2 switching and Layer 3 routing management with extensive IEEE protocol and IETF RFC support Optional VICTORY infrastructure Switch and Router support Small Form Factor (SFF) sub-� ATR system Conduction- or convection-cooled chassis Physical dimensions of 4.88 in. (W), 3.61 in. (H), 8.90 in. (L) Includes the XPedite7570 4th generation Intel Core i7-based 3U VPX module Includes the XPort3301 dual 10 Gigabit Ethernet XMC module Includes the XChange3018 Gigabit and 10 Gigabit Ethernet switch Optional Removable Memory Bay (RMB) for XPort6193 ruggedized 2.5 in. SATA SSD memory module Integrated 28 VDC power supply MIL-STD-461 E/F EMI filtering Environmentally sealed Circular connector support [...] (+)

      Features:

    • XPand6052
      The XPand6052 is a Small Form Factor (SFF) system featuring an XPedite5205, which runs Cisco IOS® Software with Cisco® Mobile Ready Net capabilities, and an XPedite7450 for general processing. XPand6052 can be utilized as a development platform or a deployed system.XPedite5205 uses the same Cisco IOS® that IT staffs in the military, energy, public safety, and other industries are already trained on, enabling organizations to expand their network to personnel, equipment, facilities, and vehicles at the edge of the network – warfighters on the battlefield, mines and drilling platforms, natural disaster mobile command centers – without any additional training. The XPand6052 can be connected to UHF, VHF, Wi-Fi, and other IP-based radio platforms to create the network nodes used to form mobile ad hoc networks (MANETs).The router offers four Gigabit Ethernet interfaces and a rich Cisco IOS® Software feature set for the most Size, Weight, and Power (SWaP)-constrained applications. To meet the needs of demanding mobile and embedded networking applications, the XPand6052 provides hardware encryption, radio aware routing (RAR) with support for the latest Dynamic Link Exchange Protocol (DLEP), support for IPv6, integrated threat control with integrated Cisco IOS® firewalls and Intrusion Prevention System (IPS), and Quality of Service (QoS). (+)

      Features:

      346228747022837731.jpg
      • Integrated XPedite5205: NIST FIPS 140-2 Overall Level 1 validated and NIAP Common Criteria Certified
      • Runs Cisco IOS® software
      • Cisco® Unified Communications Manager Express (CME) support
    • XPand6206
      The XPand6206 is a Commercial-Off-The-Shelf (COTS) Rugged 20-Port Gigabit Ethernet switch and router that maximizes performance while minimizing SWaP. With a compact design and weighing less than nine pounds, the XPand6206 is the smallest available, truly rugged, Ethernet switch to support this amount of networking performance and functionality. FEATURES: Rugged 20-port 10/100/1000BASE-T Gigabit Ethernet switch Optional XPedite5205 Cisco® IOS™ Gigabit Ethernet Embedded Services Router Optional Layer 2 switching and Layer 3 routing management with extensive IEEE protocol and IETF RFC support Optional VICTORY Infrastructure Switch and Router support Small Form Factor (SFF) sub-� ATR system Conduction- or convection-cooled chassis Physical dimensions of 4.88 in. (W), 3.61 in. (H), 8.90 in. (L) Includes two XChange3013 Gigabit Ethernet switches Integrated 28 VDC power supply MIL-STD-461 E/F EMI filtering Environmentally sealed Circular connector support [...] (+)

      Features:

    • XPand4208
      The XPand4208 is a high-performance, expandable computing and networking platform for environmentally demanding, SWaP-restricted avionics and vetronics applications. The XPand4208 has been qualified to the rigorous MIL-STD-810F, DO-160F, and MIL-STD-461F Environmental and EMI/EMC standards. This feature-rich LRU includes two quad-core Intel® Core™ i7 processors, each capable of operating at up to 2.1 GHz. The XPand4208 provides a number of external I/O interfaces, including eleven Ethernet ports, two DVI ports, eight USB ports, nine serial ports, and optional four isolated GPIO discretes. FEATURES: Sub-� ATR footprint: 4.88 in. (W), 8.3 in. (L), 7.36 in (H) 3U OpenVPX-based (VITA65) architecture Two quad-core Intel® Core™ i7 processors Intel® Active Management Technology (AMT) support Toolless, high-reliability, removable SSD memory modules 256-bit AES hardware encryption Gigabit Ethernet switched fabric Optional Layer 2 managed and Layer 3 routed network fabric Optional XPedite5205 Cisco® IOS™ secure Router XMC Up to 512 GB per module Zeroize support Eleven external Ethernet ports Nine serial ports Eight USB ports Optional four isolated GPIO discretes Optional MIL-STD-1553 and ARINC 429 28 VDC MIL-STD-704 input power Qualified to MIL-STD-810F and DO-160F Environmental Specifications Qualified to MIL-STD-461F EMI/EMC specifications [...] (+)

      Features:

    • XPedite6401
      The XPedite6401 is an XMC/PrPMC mezzanine module that supports an NXP QorIQ LS1043A processor with four 64-bit ARM Cortex-A53 cores operating at up to 1.6 GHz. The LS10xxA processor family delivers excellent networking performance and flexible I/O options in a single System-on-Chip (SoC) design, making it the logical choice for Small Form Factor (SFF) networking and rugged industrial embedded computing applications. The XPedite6401 supports up to 8 GB of DDR4-1600 ECC SDRAM memory in its default configuration with the LS1043A processor. (+)

      Features:

      339332562022547118.jpg
      • NXP QorIQ LS1043A processor with four 64-bit ARM A53 cores at up to 1.6 GHz
      • LS1043A: Up to 8 GB of DDR4-1600 ECC SDRAM
      • 128-bit NEON SIMD engine per core
    • Cisco® 5940
      The Cisco® 5940 Embedded Services Router (ESR) is optimized for mobile and embedded networks that require IP routing and services. The CompactPCI form factor complemented by Cisco IOS® Software and Cisco Mobile Ready Net capabilities, provide highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links. (+)

      Features:

      209658854022739523.jpg
      • Runs Cisco IOS software
      • Four integrated 10/100/1000 Ethernet ports
      • Cisco Unified Communications Manager Express (CME) support
    • XIt4103
      6U CompactPCI I/O Transition Module for XCalibur4101 (+)

      Features:

      43350.jpg
      • 6U transition module
      • One DVI port
      • Two PICMG 2.16 10/100/1000 Mbps Ethernet ports
  • Cavium Networks  (4)
    • LiquidIO® Server Adapters
      LiquidIO Server Adapter family enables data centers to rapidly deploy high performance SDN applications for both installed and new infrastructure while clearly enhancing server utilization, response times and network agility. This product family, in a standard server compliant half-height PCI Express form-factor, provides a proven, high-performance, general-purpose programmable adapter platform that enables cloud service providers to offload any functionality in Data Center. (+)

      Features:

      321823351871199124.jpg
      • Supports VXLAN, NVGRE, STT, IPsec and custom overlay stacks
      • Supports Open vSwitch, Openow compatible
      • Integrated networking and System I/O: 10 GbE, PCIe Gen2
    • OCTEON Processors
      A family of network services processors based on the MIPS64 architecture (+)

      Features:

      • Targets processor Layer 3 to Layer 7 networking applications with a standard programming model
      • Target applications include firewwall, VPN, IDS and anti-virus functionality, secure intelligent switches with SSL and content switching, XML switches, intelligent NICs, and storage applications
      • Offers the ease-of-use of standard OS-based programmability, along with high data-plane throughput with built-in hardware acceleration for both intelligent Internet services applications and security processing
    • CNX880xx
      XPliant® CNX880xx family of Ethernet switches provide unprecedented flexibility in protocol processing without compromising speed. XPliant Packet Architecture (XPA™) allows programming of every element of switch packet processing. Cavium / XPliant provides a complete set of networking protocols with the switch. However, as new protocols are required, the switch can be updated by software to add support for these new protocols, including changes to parsing, lookups, traffic scheduling, packet modification, scheduling, and traffic monitoring. (+)

      Features:

      321823017871361815.jpg
      • 3.2 Terabits per second capacity
      • 128 field proven 25G SERDES
      • Support of 25G Ethernet Consortium specification
    • OCTEON TXâ„¢ 64-bit ARM-based SOCs
      Comprehensive Control and Data Plane Solution for Open, Services-Centric Applications (+)

      Features:

      • Fanless, Cost Effective
      • Flexible & Wide Connectivity
      • Hardware Virtualization
  • Lanner Electronics, Inc.  (4)
    • FW-8556
      1U Network appliance for dual-core Intel® Xeon® processor ULV delivers greater I/O bandwidth per Watt (+)

      Features:

      • Performance core
      • Enjoy increased performance suitable for a wide range of security applications with Intel® dual-core Xeon LV™, Intel® dual-core Xeon ULV™, and Celeron™ processors in a 1U rackmount chassis
      • Fast networking I/O PCI-Express bus networking data paths eliminate performance bottlenecks by efficiently handling large address and data packets
    • MR-550
      Multi-core MIPS64 platform with embedded encryption, networking, and TCP acceleration engines (+)

      Features:

      36430.jpg
      • Intelligent Security - Unique hardware acceleration implements the latest set of algorithms to enable future-proof designs
      • Extensive Networking Interfaces
      • Deploy our base product with five GbE ports or customize with up to three SFP Connectors
    • RS12-38700
      A 45 nm Quad-Core Intel Xeon processor-based enterprise-class storage networking appliance (+)

      Features:

      • Designed for network-centric service applications
      • Core architecture built around the Intel 5000P chipset
      • Supports two quad-core Intel Xeon processors, eight fully buffered DIMMs, and two PCI Express networking modules
    • MR-955
      Lanner's next generation network security platforms deliver exceptional performance and flexible networking using Cavium OCTEON Plus and OCTEON II Processors [...] (+)

      Features:

  • Flexcomm Limited  (1)
    • Stareast
      Stareast for Mesh and Radio Networking Product (+)

      Features:

      • Radio Networking Research
      • Equipped with Intel Wireless PRO/2200 miniPCI card
      • General research platform
  • One Stop Systems Inc.  (7)
    • Gigabit Ethernet AdvancedMC
      Gigabit Ethernet AdvancedMC board with a native PCI Express (PCIe) design (+)

      Features:

      33862.jpg
      • Four Gigabit Ethernet copper ports for use in a wide variety of next generation wireless and storage networking equipment
      • Single-width full height module, making it suitable for telecom equipment manufacturers to add multiple 10/100/1000 Ethernet ports to networking equipment that utilizes the new AdvancedMC form factor
      • OEMs can use the LAN AdvancedMC board in high-performance embedded systems according to MicroTCA specifications
    • securePMC-x
      Hhigh-performance security offload solutions (+)

      Features:

      19765.jpg
      • Designed for integration into Linux-based systems
      • Advanced encryption processors accelerate SSL and IPsec cryptographic operations, significantly improving security, performance, and availability of your applications
      • Designed to enable quick integration by OEMs, VARs, and end users
    • OSS-SS2-X-XM
      SuperSwitch 2 offers PCI Express-over-cable networking for 3 to 5 PCs (+)

      Features:

      35145.jpg
      • SuperSwitch 2 includes connecting up to five processors using one PCIe x4 mezzanine cable adapter, up to four PCIe x4 cable adapters, PCIe cables up to 7 meters and ExpressNet software suite
      • Enables data transfers at speeds up to 20 Gbps
      • ExpressNet software supports 64 bit CPUs as well as multi-threaded environments [...]
    • OSS-SS2-8-Xm
      SuperSwitch 3 offers PCI Express-over-cable networking for 6 to 8 PCs (+)

      Features:

      35144.jpg
      • SuperSwitch 3 includes connecting up to eight CPUs or any combination of CPUs and I/O devices, using one 8-port 1U switch, one PCIe x4 host adapter, Express Card or CPCIe host adapter, up to 7 PCIe host cable adapters, up to 8 PCIe cables and ExpressNet software suite
      • Enables data transfers at speeds up to 20 Gbps
      • ExpressNet software supports 64 bit CPUs as well as multi-threaded environments
    • OSS-LAN-AMC-4GC
      The Gigabit Ethernet AdvancedMC board with a native PCI Express offers four Ethernet copper ports for use in next generation wireless and storage networking equipment (+)

      Features:

      33894.jpg
      • Single-width, full-height module (PICMG AMC.1 Rev 1.0)
      • Four auto-negotiating 10/100/1000 Ethernet ports with RJ-45 (copper) connectors
      • Native PCI Express design features high performance Marvell Yukon® II MAC/PHYs
    • OSS-SS1-X-XM
      SuperSwitch 1 offers PCI Express-over-cable solutions for point-to-point communications (+)

      Features:

      35146.jpg
      • SuperSwitch 1 includes one PCIe x4 host adapter attached via a PCIe x4 cable to a CompactPCI Express x4 cable adapter, PCIe x4 cable adapter or Express Card and ExpressNet software suite
      • Data transfers between two systems occur at 20 Gbps
      • ExpressNet software supports 64 bit CPUs as well as multi-threaded environments
    • 6U CompactPCI Express CPU board
      Two PCIe x8 and four PCIe x4 links to the backplane (+)

      Features:

      36490.jpg
      • Intel Core Duo 1.66 GHz processor
      • One PMC and one XMC site
      • RTM with CompactFlash and 2-1/2" SATA hard drive support
  • HomePlug Powerline Alliance  (1)
    • IEEE P1905 Standard
      Support for IEEE P1905 Convergent Digital Home Network Standard (+)

      Features:

      52789.jpg
      • P1905 network includes combinations of stationary home networking devices and mobile devices
      • Standard provides an abstraction layer to established powerline, wireless, coaxial cable and Ethernet home networking technologies
      • Abstraction layer common interface allows applications and upper layer protocols to be agnostic to the underlying home networking technologies
  • Mercury Systems  (7)
    • Ensemble MPC-102
      A dual-core 8641D AMC module (+)

      Features:

      34056.jpg
      • Offers Serial RapidIO or PCI Express connections to the carrier card, along with four GbE connections (two to the panel and two to the AdvancedMC connector), a SATA port, and dual RS-232 connections
      • Up to 10 Gbps raw I/O bandwidth on Serial RapidIO
      • 1.3 GHz PowerPC
    • POET
      First Protocol-Agnostic, Multi-Fabric Interconnect Technology for Intel Embedded Computing Product Line (+)

      Features:

      46086.jpg
      • Protocol Offload Engine Technology - POET
      • At its highest level, POET implements a collection of standard interfaces to create a bridge between processors and switch fabrics
      • Initially POET will support both Serial RapidIO (sRIO), the overwhelmingly preferred switch fabric for the defense industry and 10 Gigabit Ethernet, the most common commercial fabric
    • Ultra-Dense Embedded Mass Storage
      The data interface can be designed to meet system needs, including SATA, 10 GbE, SFPDP, Fibre Channel, or other high-bandwidth interconnects. Technologies such as POET™ (Protocol Offload Engine Technology) add further networking capabilities and innovative video compression solutions. Redundancy through technologies such as RAID can be implemented, as can encryption for security and deep packet inspection for protection against intrusions, non-compliant data, and viruses. Next-generation solutions will address methods for storing analog signals as well. (+)

      Features:

      304755662861925028.jpg
      • Had a storage capacity of 48 TB (upgradeable to 96 TB with no increase in SWaP)
      • Fit into the 0.4 cubic foot requirement
      • Weighed just 25 lb and required under 160W
    • Ensemble
      Serial RapidIO AdvancedTCA application development system (+)

      Features:

      17666.jpg
      • Supports up to five mesh-enabled carrier boards in an AdvancedTCA chassis communicating over an off-the-shelf passive backplane
      • Direct 4X serial RapidIO path to and from every board to every other board for 100 GBps full duplex capacity
      • Carrier boards may be used as node boards in a chassis compliant with a future RapidIO subsidiary specification to PICMG 3.0
    • Diamond Series
      A series of scalable, open-system multicomputers based on Intel microprocessors and a Linux operating environment (+)

      Features:

      17211.jpg
      • Models available for 1U, 2U, and 4U-sized rack configurations
      • Dual Intel Xeon processors at 2.4 or 2.8 GHz
      • Several memory and I/O options
    • Ensemble2 AMC Board
      Carrier board (+)

      Features:

      32031.jpg
      • Provides the basis for the Ensemble2 Application Development Platform
      • Each Ensemble2 AdvancedMC site provides RapidIO connectivity and Gigabit Ethernet through its connector
      • Each AdvancedMC carrier board in the Ensemble2 system has four AdvancedMC sites, with two 10 Gbps RapidIO interfaces for an onboard aggregate bandwidth of 80 Gbps
    • Dual Cell-based Blade
      A dual Cell-based blade designed upon Cell BE processor technology and the open BladeCenter standard for managed server chassis (+)

      Features:

      • Unprecedented peak performance of 400 GFLOPS
      • Two IBM Cell BE processors
      • XDR memory from Rambus Inc.
  • Green Hills Software, Inc.  (1)
    • Platform for Secure Networking
      A secure networking platform (+)

      Features:

      • Based on the safety- and security-certified INTEGRITY real-time operating system and its U.S.-developed IPv4/v6 networking stack
      • Features industry advancements in secure communications and access that allow networking equipment developers to completely secure their devices and the information flowing through them
      • Separation kernel architecture allows for fault isolation and containment and fast system recovery
  • Smart Modular Technologies  (4)
    • 32GB CoolFlex VLP DDR3 RDIMM
      combines high-density DDR3 DRAM with state-of-the-art flexible substrate technology, dramatically expanding system memory capacity (+)

      Features:

      • Well suited for use in leading-edge 1U networking and telecom routers and switches
      • CoolFlex is a proven technology that helps double memory density, reduce costs, and leverage multi-source DRAM supply chains with highly reliable, high-speed, thermally enhanced DDR3 RDIMMs
      • Configured as quad-rank 4096Mx72, SMART Modular's CoolFlex 32GB VLP RDIMM allows networking and telecom blade OEM designers to populate their boards with up to four 32GB DIMMs per processor while using vertical sockets [...]
    • XceedPC/Geode
      The SMART XceedPC family of products are fully featured, fanless PCs specifically designed for space critical, high reliability, long life embedded applications (+)

      Features:

      32324.jpg
      • Fanless operation
      • Noiseless Dramatically enhanced field reliability
      • Reduced field maintenance costs
    • SMARTengine/IIcPCI-6U
      A SBC that integrates the 333 MHz Pentium II processor without a CPU module (+)

      Features:

      • Fits in a single-slot, designed for telecom switch applications
      • Supports hot swap
      • PMC mezzanine site
    • SMARTengine/750cPCI-6U
      6U SBC single-slot CompactPCI for telecom, networking, and industrial control (+)

      Features:

      • 400 MHz PowerPC 750 microprocessor with an internal clock rate of up to 400 MHz and 1 Mbyte of Level 2 cache
      • Interface features include: 10/100BaseT Ethernet ports, a 16-bit LVDS SCSI port, a 32-bit PMC expansion port, JTAG interface support for in-circuit testability, three 16-bit counter/timers with interrupt capability and battery backup
      • Capable of running real-time operating systems including pSOS and VxWorks
  • NetLogic Microsystems  (1)
    • XLP316 processor
      Best-in-class quad-core (+)

      Features:

      • 16-issue
      • 16-threaded
      • Superscalar processor architecture
  • AppliedMicro  (4)
    • PRS C192X Cell Switch Fabric Interface
      Fabric interface mezzanine for AdvancedTCA I/O blades such as AMCC's “nP3710 ATCA” blade and RadiSys' “Promentum ATCA-7010” blade (+)

      Features:

      • Features the AMCC's PRS C192X fabric interface, a queue manager device of AMCC's PRS switch fabric family, the shared-memory cell switches that provide best-in-class features for carrier-grade switching applications
      • In star topology implementations, operates in conjunction with an AdvancedTCA Cell Switch blade like AMCC's PRS40G-ATCA and supports from 2.5 Gbps (overspeed factor of 2) to 4 Gbps (Ethernet) of user bandwidth
      • In mesh topology implementations, up to 8 AdvancedTCA I/O blades equipped with the PRS C192X FIC mezzanine can interoperate without any centralized fabric switch: one or two blades can support up to 10 Gbps of user bandwidth, the other blades operating at 2.5 Gbps (overspeed factor =2)
    • AMCC PRS80G-ATCA
      Switch blade supports 8 x 10 Gbps full-duplex slots with QoS enforcement at media speed (+)

      Features:

      32163.jpg
      • Suitable for the convergence of voice, video, and data traffic, thanks to efficient QoS, bounded transit delay, and guaranteed precedence of time sensitive traffic over other traffic types
      • QoS enforcement at media speed supported by end-to-end, in-band flow control mechanisms through the switch fabric
      • Real-time traffic support, for example TDM
    • PowerPC 405EP
      A high-performance, low-power processor for embedded networking applications (+)

      Features:

      • Delivers up to 333 MHz performance and a mix of features for Internet and communication products
      • Contains two Ethernet MACs to enhance integration and simplify board design
      • Offers Packet Reject external interface and counters to enhance network management
    • PowerPC 440EP
      A high-performance, low-power processor for embedded networking applicaitons (+)

      Features:

      • Delivers 333 MHz to 533 MHz performance for high-speed embedded designs
      • 32-bit implementation of the Book E Enhanced PowerPC Architecture
      • Superscalar PowerPC 440 core with large L1 caches and high-speed IBM CoreConnect bus technology
  • Phoenix Contact  (4)
    • FL WLAN 5101
      The FL WLAN 5101 offers high-speed wireless networking up to 300 Megabits per second (Mbps), meeting the needs of the most bandwidth-demanding applications such as IP-based video surveillance, plant networking and mobile operator access for programming and maintenance. (+)

      Features:

      225475709981449187.jpg
      • Offers high-speed wireless networking up to 300 Megabits per second (Mbps)
      • Meets the needs of the most bandwidth-demanding applications such as IP-based video surveillance, plant networking and mobile operator access for programming and maintenance.
      • The new CM (Cluster Management) technology simplifies wireless network management. All access points in a WLAN network can be easily configured and managed via a single web interface using any access point within the network, without additional costs for expensive hardware or software.
    • IBS VME6H SC/RI/I-T
      An Interbus Generation 4 coupler (+)

      Features:

      • 6U VMEbus
      • Remote connection via 9-position D-Sub connector
      • Serial diagnostic interface
    • IBS VME3H SC/I-T
      An Interbus Generation 4 controller board (+)

      Features:

      • 3U VMEbus
      • Remote connection via 9-position D-Sub connector
      • Serial diagnostic interface
    • IBS VME6H SC/I-T
      An Interbus Generation 4 controller board (+)

      Features:

      • 6U VMEbus
      • Remote connection via 9-position D-Sub connector
      • Serial diagnostic interface
  • ADLINK Technology, Inc.  (11)
    • CSA-7400 MICA Network Appliance
      The ADLINK CSA-7400 is a high-performance, high-density computing platform supporting four dual Intel® Xeon® processor E5 compute nodes, interconnected by dual redundant switch modules. This product is designed as a next-generation network security appliance and offers a highly scalable design in a compact 2U rackmount form factor for packet inspection, firewall, load balancer, network monitoring, security gateway, and voice gateway applications. The CSA-7400 can ensure uninterrupted service delivery through hot-swappable compute nodes and switch modules. It is ideally suited for building next generation high-performance firewalls and virtualized telecom elements. ADLINK network appliances are accompanied by the ADLINK PacketManager, a software package that includes control plane configuration tools and data plane processing acceleration capabilities. ADLINK network appliances provide increased packet processing speed and are ideal for Software Define Networking (SDN) switches and Next Generation Firewall (NGFW) applications that require Deep Packet Inspection (DPI) and network virtualization functionality. As part of ADLINK’s new Modular Industrial Cloud Architecture (MICA) platform, the CSA-7400 offers additional options for configuration, giving OEMs and system integrators faster development and a better cost-performance ratio. With the MICA platform, computing, storage, and I/O resources are modularized for flexibility, and then recombined as needed for a specific application. (+)

      Features:

      342280136871658800.jpg
      • Supports four single-system dual Intel® Xeon® processors E5 compute nodes (MCN-2600)
      • Dual redundant switch modules provide 40G internal links to each compute node, and 360G uplinks
      • Support for hardware-based acceleration for processing Network Virtualization using Generic Routing Encapsulation (NVGRE) and Virtual Extensible LAN (VXLAN), assisting the construction of large layer 2 networks in the cloud
    • aTCA-9700 40G Ethernet AdvancedTCA® Processor Blade
      The aTCA-9700 offers enhanced thermal and power management capabilities for exceptional energy efficiency, while still supporting the intensive computing requirements of carrier-grade media server, networking, and wireless infrastructure applications. The aTCA-9700 40 Gigabit Ethernet processor blade features dual Intel® Xeon® E5-2600 v2 processors, as well as a single Intel® C604 chipset and dual Intel® Communications Chipsets 8920. It offers eight channels of VLP DDR3-1866 and REG/ECC memory up to 128 GB and provides versatile connectivity through quad 40GBASE-KR4 Fabric Interface channels, dual Ethernet 10/100/1000BASE-T Base Interface channels, and dual front panel 10/1001000BASE-T egress ports. Support for Intel® Hyper-Threading Technology and Intel® QuickPath Interconnect provides increased performance from both single and multi-thread workloads while maintaining thermal and energy efficiency. FEATURES: Two Intel® Xeon® processor E5-2600 v2 family (10C/20T) Two Intel® Communications Chipsets 8920; Intel® C604 PCH Eight memory sockets support VLP DDR3-1866; REG/ECC up to 128 GB Quad 40GBASE-KR4 Fabric Interface channels Two USB 2.0 ports, VGA, USB1/2, LAN1/2, COM1/2 (mini-USB) On-board bootable storage of 16G SATA flash (up to 64G) Intel® Hyper-Threading Technology Intel® QuickPath Interconnect [...] (+)

      Features:

    • aTCA-9700 40G Ethernet AdvancedTCA® Processor Blade
      The aTCA-9700 offers enhanced thermal and power management capabilities for exceptional energy efficiency, while still supporting the intensive computing requirements of carrier-grade media server, networking, and wireless infrastructure applications. The aTCA-9700 40 Gigabit Ethernet processor blade features dual Intel® Xeon® E5-2600 v2 processors, as well as a single Intel® C604 chipset and dual Intel® Communications Chipsets 8920. It offers eight channels of VLP DDR3-1866 and REG/ECC memory up to 128 GB and provides versatile connectivity through quad 40GBASE-KR4 Fabric Interface channels, dual Ethernet 10/100/1000BASE-T Base Interface channels, and dual front panel 10/1001000BASE-T egress ports. Support for Intel® Hyper-Threading Technology and Intel® QuickPath Interconnect provides increased performance from both single and multi-thread workloads while maintaining thermal and energy efficiency. FEATURES: Two Intel® Xeon® processor E5-2600 v2 family (10C/20T) Two Intel® Communications Chipsets 8920; Intel® C604 PCH Eight memory sockets support VLP DDR3-1866; REG/ECC up to 128 GB Quad 40GBASE-KR4 Fabric Interface channels Two USB 2.0 ports, VGA, USB1/2, LAN1/2, COM1/2 (mini-USB) On-board bootable storage of 16G SATA flash (up to 64G) Intel® Hyper-Threading Technology Intel® QuickPath Interconnect [...] (+)

      Features:

    • PC/104, EBX, ETX®
      For custom embedded applications that need ISA expansion, ACPI, and ultra-high Centrino performance without a heat pipe and gives you the choice of high-performance processors with advanced networking, embedded graphics, and all of the PC-compatible component subsystems in a modular format that plus into your custom baseboard (+)

      Features:

      • The PC/104 form factor CoreModule 800 gives the user a high-performance ultra low-voltage Centrino processor with advanced networking, high performance graphics for space-constrained applications
      • CoreModule 620 Geode PC/104 SBC is for embedded applications requiring low power in a compact size and is RoHS-compliant
      • CoreModule 420 if rugged space constrained, full-featured embedded systems with modest CPU performance requirements
    • aTCA-9710
      The aTCA-9710 offers 16 channels of DDR4-2133 VLP RDIMMS, enabling higher clock and data transfer rates than those seen in previous generation memory. The new ATCA processor blade delivers unparalleled performance while keeping a thermal envelope under 105W—a level lower than its predecessor—due to the adoption of Intel® Node Manager 3.0, a power management technology. With the many enhancements to this latest platform from Intel, the aTCA-9710 is suitable for carrier-grade server, data center, networking, and also DPI, SDN and NFV applications. (+)

      Features:

      293447269861404272.jpg
      • Two Intel® Xeon® processor E5-2600 v3 family (12C/24T)
      • 16 memory sockets support DDR4-2133 REG/ECC VLP RDIMM up to 256 GB
      • Intel® C610 PCH
    • ReadyBoard 910
      Rugged by Design compact EPIC SBC powered by high-performance, low-power processors with advanced networking and all of the PC-compatible component subsystems with PC-style connectors (+)

      Features:

      217686890961809729.jpg
      • Suitable for transportation, self-service, digital signage, and video surveillance applications
      • Intel Core i7/i5 or Celeron Processor and Mobile Intel HM65 Express Chipset; Onboard SSD
      • Dual Gigabit Ethernet; USB 3.0 with SuperSpeed 5Gb/s Data Transfer Rate
    • aTCA-6891
      PICMG 3.4 AdvancedTCA Advanced Switching Option3 (+)

      Features:

      • Quad ASI x4 Fabric Interface Channels up to 5-slot Full Mesh configuration, 32 Gbps
      • Dual 64-bit Low Voltage Intel Xeon 2.8 GHz
      • 1 MB L2 cache
    • EPIC ReadyBoard 620
      High-performance, low-power processor with advanced networking and all of the PC-compatible component subsystems with PC-style connectors (+)

      Features:

      35069.jpg
      • 500 MHz AMD Geode LX800
      • Up to 1 GB DDR333 SODIMM
      • Single PCI-bus Enhanced Ultra DMA
    • cPCIS-6125
      A communications server for networking, VPN, firewall, VoIP gateway, and computer telephony (+)

      Features:

      12224.jpg
      • 1U high, 9.5 inches deep, 19-inch rackmount chassis
      • Dual cooling systems
      • Installation and upgrades are accomplished by plugging in two 1-slot or one dual-slot 6U CompactPCI board
    • aTCA-8505
      AdvancedTCA chassis with shelf manager and dual hot-swappable I2C controlled fan trays (+)

      Features:

      33316.jpg
      • Push-pull design for a right-to-left transverse of air flow and a more efficient cooling system
      • In order to accelerate the transition speed within the blades, the chassis backplane supports a full-mesh transition module
      • Suitable for network security appliance providers who demand high performance and remote control functionality
    • aTCA-8506
      5U AdvancedTCA rack-mount system (+)

      Features:

      • 19" rack-mount, 5U, 15.3" depth
      • 5-slot full mesh topology fabric interface
      • 5-slot standard Rear Transition Module
  • Concurrent Technologies, Inc.  (8)
    • AM F5x/msd
      AM F5x/msd is an AdvancedMC™ Single Module (Mid-size or Full-size) based on an Intel® Skylake microarchitecture quad-core processor for long life-cycle, high performance applications. Other key features include a Gen 3 PCI Express® fabric interface and dual 10 Gigabit Ethernet connections for for hisgh speed networking. (+)

      Features:

      353832135142535554.jpg
      • ntel® 4-core processor variants for CPU or GPU intensive processing loads
      • Gen 3 PCI Express® fabric interface options for flexible connection to other payloads
      • 2 x 10GBASE-T Ethernet for networking
    • FP 110/019
      A 24-port GbE Switched Fabric Board for PICMG 2.16- or VITA 31.1-based systems (+)

      Features:

      32516.jpg
      • Typically consumes less than 20 W
      • Offers twenty-four 10/100/1000Mbps autonegotiating Ethernet ports, 19 accessible via a PICMG 2.16 or a VITA 31.1 packet switched backplane
      • Switch core contains a wire-speed, Layer 2, Quality of Service (QoS) switch fabric
    • TR C4x/msd
      TR C4x/msd is a 3U VPX™ board featuring the Intel® Xeon® Processor D-1500 family and up to 32GB of DDR4 ECC DRAM for high performance embedded computing applications. Concurrent Technologies are supporting variants based on 8, 12 and 16-core processors to suit application profiles. TR C4x/msd has four SATA600 interfaces for external drives plus two SATA600 connections for on-board solid state disk options. For high speed networking applications, two 10 Gigabit Ethernet data plane ports could be used either as a system ingress/egress point or for local data connectivity within the chassis. Two Gigabit Ethernet control plane ports are available on the backplane and two optional Gigabit Ethernet ports are available on the front panel of air cooled boards.TR C4x/msd can also provide up to x16 PCI Express® (PCIe®) lanes on the expansion plane of the backplane with a theoretical bandwidth of 15.6GB/s. These PCIe lanes enable point to point and small mesh configurations for high speed applications without the use of an additional switch module. (+)

      Features:

      333161105142447798.jpg
      • Intel® Xeon® processor D-1500 Family
      • Up to 32 Gbytes of DDR4 DRAM
      • On-board solid state drive (SSD) options
    • FP 110/019 - 6U CompactPCI Ethernet Switch
      FP 110/019 is a 24-port 10/100/1000Mbps Ethernet Switched Fabric Board for use in CompactPCI® PICMG® 2.16 and VITA 31.1 Packet Switched Backplane environments. It supports up to nineteen node boards, a fabric to fabric link and for user connections, up to four front panel Ethernet interfaces. It offers high speed, full line rate Layer 2 switching fabric on all Ethernet ports. Quality of Service (QoS) operation is supported with four priority queues and a variety of traffic classes for time-critical and multimedia traffic. System monitoring is provided by the PICMG 2.9 compliant IPMI subsystem, supporting the IPMB0 serial management bus. The FP 110/019 is an excellent choice for cost sensitive applications. Typical applications include networking equipment, voice over IP (VoIP) telephony systems and blade-based servers. FEATURES: 6U CompactPCI, Layer 2 Ethernet Switch, PICMG 2.16 and 2.9 compliant [...] (+)

      Features:

    • TR C4x/msd
      TR C4x/msd is a 3U VPX board featuring the Intel Xeon Processor D-1500 family and up to 32GB of DDR4 ECC DRAM for high performance embedded server applications. Concurrent Technologies variants based on 8, 12 and 16-core processors to suit application profiles. TR C4x/msd has four SATA600 interfaces for external drives plus two SATA600 connections for on-board solid state disk options. For high speed networking applications, two 10 Gigabit Ethernet data plane ports can be used either as a system ingress/egress point or for local data connectivity within the chassis. Two Gigabit Ethernet control plane ports are available on the backplane and two optional Gigabit Ethernet ports are available on the front panel of air cooled boards. TR C4x/msd can also provide up to x16 PCI Express lanes on the expansion plane of the backplane with a theoretical bandwidth of 15.6GB/s. These PCIe lanes enable point to point and small mesh configurations for high speed applications. (+)

      Features:

      346201173142513488.jpg
      • Intel® Xeon® processor D-1500 Family
      • Up to 32 Gbytes of DDR4 DRAM
      • On-board solid state drive (SSD) options
    • Concurrent Technologies Inc.
      The SY VPX/507 is a centrally switched 3U VPX development system (+)

      Features:

      • 2 x processor slots
      • 1 x fabric switch slot
      • 4 peripheral slots
    • SY VPX/507 - 3U VPX Development System
      The SY VPX/507 is a centrally switched 3U VPX development system (+)

      Features:

      • 2 x processor slots
      • 1 x fabric switch slot
      • 4 peripheral slots
    • E3-1500 v6
      AM G6x/msd customers will be able to specify a choice of processors including the Intel® Xeon® processor E3-1505M v6 or Intel® Xeon® processor E3-1505L v6. (+)

      Features:

      363521946861668284.jpg
      • These are both high performance 4-core devices with Intel® HD Graphics P630 and are optimized to create board variants with high compute performance or low power consumption respectively. AM G6x/msd has an on board 64GB Solid State Drive (SSD) for reliable Operating System and application storage.
      • For high speed mass storage, AM G6x/msd has two sites for M.2 storage modules based on PCI Express® M-key interconnects supporting the new Non-Volatile Memory Express® (NVMe) protocol which is optimized for solid state drive storage performance. AM G6x/msd is also the first board from Concurrent Technologies that has support for the future Intel® Optane range of 3D XPoint mo
      • A version will also be available offering dual 10 Gigabit Ethernet connectivity for higher speed networking with the ability to connect via either electrical or fibre links making it more suitable for use in remote locations. As with all other Concurrent Technologies products, AM G6x/msd is designed for long life-cycle applications. [...]
  • MEN Micro Elektronik GmbH  (1)
    • F13 PowerPC cPCI SBC
      PowerPC CompactPCI SBC provides a rugged engine for embedded communications/networking systems (+)

      Features:

      • Configured with either of two next-generation 833 MHz PowerQUICC III processors from Freescale Semiconductor, the MPC8540 or the MPC8560
      • Equipped with an Altera Cyclone FPGA, a device which can be used to implement multiple parameterized blocks of IP, reducing design and test time for application-specific I/O or other functionality
      • Suitable as a control element for network routers and switches, storage subsystems, network appliances, and print and imaging devices
  • Faraday Technology  (1)
    • NC Express
      Highly integrated 90 nm structured ASIC SoC platform that combines Faraday's Metal Programmable Cell Array (MPCA) technology with high-speed multiprotocol Serial I/O optimized for complex networking and communication ASIC, ASSP, and SoC designs (+)

      Features:

      33534.jpg
      • One-third the NRE of standard cell 90 nm ASIC
      • 3x faster turnaround time
      • Use of standard ASIC design tools and flow
  • Arrow Electronics  (1)
    • AdvancedTCA Starter Kit
      5U, 5-slot full mesh backplane that supports AdvancedTCA PICMG 3.0, 3.1, 3.2, 3.3, and 3.4 specification (+)

      Features:

      21883.jpg
      • AdvancedTCA compliant shelf management system
      • 19" bench top/rackmount horizontal lead enclosure
      • ZNYX Networks Ethernet switch provides single-chip, Intel media switch 16-port Gb device capable of switching up to 24 million packs per second
  • Pixus Technologies  (3)
    • 6U ATCA SlotSaver - 40G
      Pixus Technologies, a supplier of backplane, enclosure, and embedded component solutions, has introduced a new 6U AdvancedTCA (ATCA) SlotSaver Shelf that gains 2 slots of payload card usage, along with AC power. The density, full redundancy, and versatile power configuration is well suited for telecom, military/aerospace, and high-end networking/computing applications. (+)

      Features:

      200691083411648479.jpg
      • Combined switch/shelf manager saves 2 node slots
      • 50% more computing density
      • Simultaneous AC/DC power
    • ATCA® Shelves and Backplanes
      AdvancedTCA® shelves from Pixus are equipped with the hot-swap high-performance RiCool III fans. These fans offer added output coupled with a reduced noise level. Pixus 40GBASE-40KR4 backplanes are monolithic with a high level of signal integrity in dual star, full mesh, or replicated mesh. (+)

      Features:

      304838884861878701.jpg
      • PXS1340 13U ATCA Shelf
      • PXS0640 SlotSaver 6U ATCA Shelf
      • PXS0309 3U ATCA Hybrid Chassis with 8 AMCs [...]
    • PXS1340
      The PXS1340 is a 13U, 14-Slot ATCA Shelf. It supports a 40GBASE-KR4 backplane in dual-star, full mesh, or replicated mesh configurations. All of the Field Replaceable Units (FRUs) provide full redundancy with quad Cooling Units (CUs), dual Power Entry Modules (PEMs), dual Shelf Manager Controllers (ShMCs), and dual Hubs. It supports front-to-rear cooling. Both DC and AC power options are available. Over 15,000 of the 10GBASE-KR version of the shelf have been deployed world-wide. (+)

      Features:

      300077358275634038.jpg
      • 40G or 10G Dual Star 14-Slot Backplane
      • 13U tall x 19â€? wide x 15â€? deep
      • Superior front-to-rear cooling configuration for airflow with empty Slots per NEBS
  • Kontron  (9)
    • CP3923
      he Kontron CP3923 fully managed switch is a cost-effective high-performance solution for harsh environments; the target markets include networking, transportation, aerospace, military and automation (+)

      Features:

      45353.jpg
      • The Kontron Gigabit Ethernet Switch CP3923 is a fully managed Layer 2/3 Gigabit Ethernet (GbE) switch offering IPv4 routing and optional IPv6 routing as well as full management capabilities
      • Supports powerful CLI, Telnet, Web, and SNMP management interfaces to configure the entire set of protocols and parameters including Layer 2 and Layer 3 (IPv4/v6) protocols, Multicasting, QoS, and Security
      • For applications requiring higher bandwidth, it also supports link aggregation
    • CP341
      Two independent 10/100 Mbytes/sec Ethernet adapters for applications that support bus and star topologies and provide remote boot ability (+)

      Features:

      • Fast Ethernet LAN controller with integrated physical layer transceiver (PHY)
      • Features Intel 82558 100BaseTX technology
      • RJ45 configured front panel with category 5 UTP cable pinout
    • AT8902
      A PICMG 3.0 and 3.1 compliant hub board for AdvancedTCA shelves (+)

      Features:

      34797.jpg
      • Suitable for dual-star and full-mesh configurations in 14- and 16-slot systems
      • Provides 2 mid-size or full-size AMC slots for customization
      • Allows cost-optimized tailoring to the requirements of the application
    • FS3100
      The Kontron FS3100 is a versatile, multi-function storage and networking server in a 3U NEBS-compliant platform that is ideal for mission critical streaming media, lawful interception, and security/data storage applications. (+)

      Features:

      209056922961248092.jpg
      • Dual socket support for six-core Intel Xeon Processors 5600 Series
      • Supports up to 12 x 2.5" hot swap SAS/SATA drives and (2) internal 2.5" SATA drives
      • 12 x RDIMM/UDIMM memory slots (DDR3-800/1066/1333); maximum 96 GB memory
    • Kontron VMP3
      A 3U VME CPU board (+)

      Features:

      34835.jpg
      • Uncompromising computing performance and networking bandwidth for demanding control and communication tasks, achieved by state-of-the-art PowerPC technology
      • Performance built around the Freescale PowerPC MPC8541
      • Dual Gigabit Ethernet plus one Fast Ethernet channel
    • Development System
      Five IEC1131-3 programming languages and an OS-independent GUI (+)

      Features:

      • A series of 32-bit VMEbus real-time development systems tailored to OS-9 industrial automation applications
      • With technical assistance from Microware Systems Corp
      • Supports fieldbus networking technology
    • ECM
      A ruggedized, small-form factor PC engine for high-performance, application-specific mobile systems (+)

      Features:

      20607.jpg
      • Measures 6.5” (L) x 4” (W) x 1.8” (H)
      • Light weight and small enough for body-worn systems
      • Third-party, MIL-STD-810F certified packaging
    • 6U VPX Processor Board VX6060
      VX6060 is the computing tool that MAG HPEC users have been waiting for (+)

      Features:

      45806.jpg
      • Combined with the power of 6U VPX backplane technology, a new range of rugged embedded computers is appearing, which allows outstanding applications to emerge
      • Implemented as two independent computing nodes, attached to a powerful Ethernet and PCIe infrastructure, the Kontron VX6060 is the ideal building block for intensive parallel computing loads
      • Any number of Kontron VX6060 boards can be used together in full mesh or switched OpenVPX environments
    • XL8500
      Suitable for software or hardware developers wanting to use AdvancedTCA CPU blades together with a hub blade (+)

      Features:

      • Can also be used to exploit AdvancedTCA blades with the full mesh backplane in a small form factor chassis of only 5U
      • With the redundant shelf manager and the full rear I/O possibilities, no AdvancedTCA feature will suffer any disadvantage due to the smaller form factor
      • The system comprises a 5U/84HP rack with either a 750 W wide range AC power supply or a 48 VDC input and enough airflow to cool all blades [...]
  • Broadcom  (5)
    • BCM112x
      A single-core, high-performance MIPS processor (+)

      Features:

      • Processor line targeted at the networking, wireless communications, storage, server/networking appliance, and imaging markets
      • Low power levels
      • Small package [...]
    • FASTPATH Software
      Production-ready networking software for building fixed, stackable, and chassis-based Ethernet systems with faster time-to-market and lower development costs (+)

      Features:

      • Designed for OEMs developing switches, routers, IP DSLAMs, and other networking products serving the small-medium business, enterprise, access, metro edge, and wireless markets
      • Works with multiple operating systems, including VxWorks and Linux
      • Integrated with silicon from industry-leading companies such as: Broadcom, Marvell, Switchcore, Vitesse, Infineon, and Agere
    • FASTPATH 4000
      Networking software platforms suitable for building stackable Ethernet switching products that require highly available managed Layer 2, 3, and 4 services (+)

      Features:

      • Built with the FASTPATH distributed architecture, dynamic failover of stack units provide enhanced levels of reliability in the event of a stack unit failure
      • Supports a single IP address across the stack and the the ability to pre-configure optional modules and stack units
      • Each platform porduct includes the FASTPATH management module which features an industry-standard Command Line Interface (CLI), SNMP, Web-based management system, and Telnet server
    • FASTPATH
      Distributed networking software designed for equipment vendors developing enterprise and service provider products, control backplane solutions, industrial automation products, or hybrid multifunction switching devices (+)

      Features:

      • Fully integrated software allows OEMs, TEMs, ODMs, and CMs building 10/100, Gigabit, or 10 Gigabit Ethernet solutions to develop production-ready products in less than 90 days
      • Available in the FASTPATH 2000 and FASTPATH 4000 platforms [...]
    • BCM1250
      A dual-core, high-performance MIPS64 processor (+)

      Features:

      • Multiprocessor solution targeted at the networking and communications markets
      • Provides performance, high functional integration, and low power levels [...]
  • Korenix Technology  (3)
    • JetBox 9300
      Three in one Industrial Networking Computer (+)

      Features:

      36403.jpg
      • Consolidates Industrial Computer, router, and managed switch to make networking simple
      • RISC, 64 MB SDRAM
      • Linux, VCOM, Modbus gateway
    • JetBox 9310
      Industrial Networking Computer (+)

      Features:

      38060.jpg
      • Consolidates industrial computer, router, PoE, and managed switch
      • RISC, 64 MB SDRAM, fanless
      • Operating temperature -40 °C to +80 °C
    • JetBox 9400/9500
      Korenix JetBox 9400 / JetBox 9500 series are embedded VPN routing platforms with industrial grade hardware design and JetOS95 Korenix Linux operating system, designed for different ruggedized industrial networking and communications applications (+)

      Features:

      • In addition to peripheral control functionalities, the JetBox series provide Ethernet transmission management which makes the wiring and setting of a front-end control box simple and easy
      • Moreover, programming capabilities of Korenix JetBox make the whole system flexible to adjust and best fit in all kinds of applications [...]
  • NEI  (1)
    • A-5000 ATCA System
      A standards-based high-reliability server featuring superior performance, advanced I/O capacity, and easy manageability (+)

      Features:

      34755.jpg
      • 5-slot AdvancedTCA system with full-mesh topology for 3.125 Gbps throughout
      • Three node slots available for AdvancedTCA single board computers, or other AdvancedTCA blades
      • Dual 16-port ZNYX PICMG 3.0 GbE base fabric switches and dual Intel Shelf Managers
  • Taoglas  (2)
    • FXP.830
      Dual-band (2.4/5.8 GHz), Flexible Polymer 3dBi Antenna for M2M Applications (+)

      Features:

      47601.jpg
      • Small, dipole antenna for 2.4/5.8 GHz band including WiFi, Zigbee and WLAN
      • 80 percent efficiency compares to 10 to 15 percent efficiency of competing chip antennas and 20 to 30 percent efficiency of pifa and loop antennas
      • Contains a tiny form factor and has double-sided 3M tape on one side for easy peel and stick mounting
    • OMB.241.05F21
      The Barracuda range of base station antennas, are an omni directional antenna that connect directly to mesh access points and telemetry units (+)

      Features:

      • They are available at 433 MHz, 868 MHz, 915 MHz, 2400 MHz and 5200 MHz for operation in the main licence-free bands used for M2M applications
      • The Barracuda range is entirely customizable, and can be made in different frequencies, colours and shapes in order to match the access point box
      • Design options include a connector integrated into the base of the antenna so the antenna can be screwed directly to the access point, eliminating cable requirements and helping with waterproofing and secure connection for long term use [...]
  • Avnet Electronics Marketing  (5)
    • ATCA Carrier Cards
      AdvancedTCA carrier cards for integrating CompactPCI and Compact Packet-Switching Backplane (cPSB) cards into an AdvancedTCA environment (+)

      Features:

      • Entry-level AdvancedTCA Base Interface carrier card provides interconnection to the PICMG 3.0-compliant data transport section, 10/100/1000Base-Tx fabric data interconnectivity in a dual star configuration, and an onboard IPMI controller
      • AdvancedTCA Full Mesh carrier card provides complete fabric interface connectivity for any CompactPCI boards,
      • Onboard Gigabit Ethernet switch with full mesh connectivity and alternate topologies including dual star, dual dual star, and limited meshes
    • ComputeNode
      Full family of 1U through 4U chassis, CompactPCI, and cPSB (PICMG 2.16) (+)

      Features:

      15569.jpg
      • Proven NEBS Level 3 compliant designs for high speed, high availability telecom and networking applications
      • Built-in Alert!Node alarm card for out-of-band chassis management
      • Redundant, hot-swappable AC or DC Power Supplies with Filters and Dual Feed option
    • Digital Video Surveillance Kit
      A Digital Video Surveillance Kit, second-generation stand-alone kit features Ethernet networking, streaming video, and onboard DSP (+)

      Features:

      35841.jpg
      • Created in conjunction with Analog Devices and Micron Technology
      • Simplified prototype development platform that uses ADI's Blackfin DSP for video processing, CMOS image sensors from Micron Technology, and Ethernet for connectivity
      • Software provides motion detection, threat analysis, and alert notification based upon preset events
    • AdvancedTCA Reference Design Kit
      Xilinx 2VP50 or 2VP70 FPGA (+)

      Features:

      20419.jpg
      • CompactFlash programming card
      • PICMG compatible board form factor
      • 128 MB DDR SDRAM
    • Xilinx AdvancedTCA Reference Design Kit
      Xilinx 2VP50 or 2VP70 FPGA (+)

      Features:

      20410.jpg
      • CompactFlash programming card
      • PICMG compatible board form factor
      • 128 MB DDR SDRAM
  • Schroff Pentair  (15 of 24)
    • 14-Slot ATCA System
      A third-generation, 14-slot AdvancedTCA system (+)

      Features:

      • Suitable for telecom and networking applications including wireless IP, telephony, and optical switches
      • System backplane available in full mesh, dual star, and dual dual star topologies
      • Designed to meet all NEBS requirements
    • Deployment Ready AdvancedTCA Systems
      2 to 16-slot AdvancedTCA systems ideal for telecom and networking applications (+)

      Features:

      20417.jpg
      • Broad range of configuration options available
      • Backplanes available in a variety of topologies including full mesh, dual star, and dual-dual star
      • Backplanes meet high-speed requirements of next-generation boards
    • 14-Slot AdvancedTCA System
      Deployment ready chassis for AdvancedTCA systems (+)

      Features:

      • 14-slot system ideal for telecom and networking applications
      • Broad range of configuration options available
      • Backplane available in a variety of topologies including Full Mesh, Dual Star and Dual-Dual Star
    • ATCA 14 Slot Full Mesh Backplane 23005-303
      A PICMG 3.0 compliant 14-slot AdvancedTCA backplane (+)

      Features:

      • Full Mesh topology (Base Interface centered)
      • Supports four ports per channel
      • Update ports supported
    • BPL001091
      2, 5 and 14 Slot Standard (+)

      Features:

      • Dual Star, Dual Dual Star and Full Mesh Topologies
      • Conforming to AdvancedTCA specification version 1.0 [...]
    • BPL000479
      2, 5 and 14 Slot Standard (+)

      Features:

      • Dual Star, Dual Dual Star and Full Mesh Topologies
      • Conforming to AdvancedTCA specification version 1.0 [...]
    • BPL000333
      2, 5 and 14 Slot Standard (+)

      Features:

      • Dual Star, Dual Dual Star and Full Mesh Topologies
      • Conforming to AdvancedTCA specification version 1.0 [...]
    • 23005-305
      2, 5 and 14 Slot Standard (+)

      Features:

      • Dual Star, Dual Dual Star and Full Mesh Topologies
      • Conforming to AdvancedTCA specification version 1.0 [...]
    • 23005-304
      2, 5 and 14 Slot Standard (+)

      Features:

      • Dual Star, Dual Dual Star and Full Mesh Topologies
      • Conforming to AdvancedTCA specification version 1.0 [...]
    • CompactPCI 2.16
      A telecom system compliant with PICMG 2.16 (+)

      Features:

      • Incorporates backplane, power supply, cooling, and provisions for monitoring into a single package that provides theoretical data transfer rates of up to 50 Gbits/sec
      • Backplane also supports StarFabric (PICMG 2.17) and serial mesh (PICMG 2.20) applications
      • Based on a 19”, 10U-high subrack with a Schroff CompactPCI packet switching backplane
    • AdvancedTCA chassis 14 slot
      Available with Full Mesh or Dual Star topology (+)

      Features:

      • 14 slot backplane
      • Proven design
      • Redundant 48VDC power input
    • AdvancedTCA front panel kits
      Stainless steel or Al extrusion versions (+)

      Features:

      • Includes Schroff hot-swap handle
      • Including special bearing for component side 1 board fixing
      • Including RFI gasket Mesh or copper beryllium (CuBe) [...]
    • AdvancedTCA chassis 5 slot
      Full Mesh backplane (+)

      Features:

      • Cooling for up to 200 W / board
      • Redundant power entry modules
      • For up to 2 shelf managers
    • PEN-6222
      An AdvancedTCA development system (+)

      Features:

      • 14-slot full mesh backplane
      • Available in Full Mesh, Dual Star, and Dual-Dual Star topologies
      • Integrated connectors for interfacing to a fan unit and for interfacing to dual shelf managers
    • AdvancedTCA Systems
      Broadest range of 2- to 16-slot AdvancedTCA systems (+)

      Features:

      35880.jpg
      • AC and DC options for both NEBS Telco and cost sensitive enterprise requirements
      • Backplane topology options including dual star, full mesh, and triple replicated mesh with bused or radial IPMB
      • Proven high-performance thermal solutions for 200 W per slot and beyond
  • Stratex Networks, Inc.  (3)
    • Eclipse Wireless Network Transmission System
      A scalable, nodal wireless transmission system (+)

      Features:

      • Serves backhaul and access applications that had been provided by point-to-point microwave radios
      • Enables wireless network node configurations in the smallest form factor available, supporting up to six independent radio traffic paths from a compact and highly modular Intelligent Node Unit (INU)
      • An integral high speed TDM bus architecture enables traffic routing between traffic paths by software without local cabling
    • Eclipse
      A wireless network transmission system (+)

      Features:

      18156.jpg
      • Node-based architecture
      • Supports up to six independent radio traffic paths from an Intelligent Node Unit (INU)
      • Integral high-speed TDM bus architecture enables traffic routing between traffic paths by software, without local cabling
    • ProVision 2.1
      A network management system (+)

      Features:

      • Uses the Cisco Element Manager Framework (CEMF) environment
      • Interoperability with network management systems of existing network infrastructures using Northbound Interface and Common Object Request Broker Architecture Interface Description Language (CORA IDL)
      • Can customize event reports and notifications using filter and sorting options
  • Radstone Embedded Computing  (1)
    • GS24
      Fully rugged, fully managed, standalone Gigabit Ethernet switch (+)

      Features:

      • Twenty-four 10/100/1000 Mbps Ethernet ports
      • Aimed at out-of-the-chassis applications - the networking of multiple subsystems, for example - the GS24 offers IPv6 traffic policing and Quality of Service (QoS) functionality such as guaranteed bandwidth allocation and prioritization
      • Connection to the light weight, space-efficient, conduction-cooled GS24 is via the rugged front panel connectors, which meet MIL-STD-810F requirements for humidity, salt spray, and dust
  • GE Intelligent Platforms, Inc.  (5)
    • MicroTCA MP-2000
      Pre-validated Modular MicroTCA Platform (+)

      Features:

      34043.jpg
      • 2U/13-slot and chassis
      • Preconfigured with processor, networking, storage and graphics AdvancedMCs
      • Pre-validation guarantees interoperability, minimizes integration time
    • MicroTCA MP-3000
      Pre-validated modular MicroTCA platform (+)

      Features:

      34044.jpg
      • 8U/15-slot chassis
      • Preconfigured with processor, networking, storage and graphics AdvancedMCs
      • Pre-validation guarantees interoperability, minimizes integration time
    • PMC-ISCSI-ST
      A single-wide 32/64-bit, PCI/PCI-X mezzanine card for enterprise-level storage and networking systems (+)

      Features:

      18147.jpg
      • Includes an iSCSI controller and a Gigabit Ethernet adapter; supports iSCSI and either TCP/IP offload or standard Ethernet simultanously
      • QLogic ISP4010 iSCSI controller includes both the PCI/PCI-X host bus and the 1000Base-T Ethernet interface
      • Two embedded 32-bit RISC processors for protocol stack processing support while TCP/IP and iSCSI offload capability is fully implemented in hardware
    • IB4X-LPCIX-2
      A PCI-X, InfiniBand host channel adapter (+)

      Features:

      • Dual 20 Gbits/sec, 4x InfiniBand ports
      • Based on Mellanox InfiniHost silicon
      • Capable of full wire-speed transmissions over InfiniBand links
    • NETernity CP923RC 3U
      A 3U CompactPCI fully managed Layer 2/3+ high-performance Gigabit Ethernet switch For Demanding Applications in Aerospace, Defense, and Commercial Environments (+)

      Features:

      43142.jpg
      • 10 ports to rear I/O delivers optimum density
      • IPv6 support for greater security, reliability, and flexibility · Rugged versions for non-benign environments
      • OpenWare switch management software for ease of use
03/24/23 03:29
Close

Subscribe to Embedded Wireless updates