Embedded Wireless

Showing results for: module radio
Refine Embedded Wireless companies and products:
embedded wireless m2m onstar lte wimax white-space near-field communications nfc wireless 802.11 wi-fi zigbee 802.15 802.15 4 module 802.15.4 airbee airbee wireless cc2420 cc2430 chipcon cc2420 compxs em2420 home automation homerf ieee 802.15 ieee 802.15 4 ieee802.15.4 long range wireless mc13191 mc13192 mesh networking module radio rf modems rf module rf modules rf receiver rf transceivers rf transmitter wireless remote control wireless sensors wpan wpans zdo zig bee zigbee-ready zigby zmd wireless sensor networks wireless sensor network
Click on any vendor
to see a listing of
module radio related products.
  • Airbee Wireless  (1)
    • Airbee ZMAC
      Fully ZigBee ready and complies completely with IEEE 802.15.4 specifications (+)

      Features:

      • Ready for integration with any application code enabling short-range wireless com
      • MAC (Medium Access Control) - The IEEE 802.15.4 MAC contains the protocol stack that enables peer-to-peer secure communications and performs management of peer and network connectivity with other ZigBee devices
      • Airbee-ZMAC is the foundation for wireless networking utilizing either Star or Mesh network topologies
  • Texas Instruments  (1)
    • CC2530
      Complete 2.4-GHz radio frequency (RF) system-on-chip solution (+)

      Features:

      • Supports the IEEE 802.15.4 standard and an extensive set of applications, including ZigBee PRO networks, ZigBee RF4CE remote controls, smart energy, home and building automation, environmental monitoring and wireless medical
      • Provides up to 256 KB of Flash memory to enable development of multiple network protocols, which TI supports with free, downloadable software and tools to ensure that customers have everything needed for complete system development
      • TI offers a variety of free protocol software stacks that are supported by the CC2530 to enable cost-optimized selection of network protocol based on system requirements
  • Beck IPC GmbH  (2)
    • WLAN Solution
      Fast and Affordable Implementation of Wireless LAN Solutions with the IPC@CHIP® from Beck (+)

      Features:

      • Pohlheim, November 7, 2006 – Ethernet has largely become well-established in the industrial environment. However, there are still many applications that cannot be implemented with Ethernet, such as mobile systems or spatially separated stations in large machine halls or in the open field.
      • In these cases Wireless LAN technology (or WLAN for short) is ideal as a replacement for Ethernet since the TCP/IP protocol used enables the transparent transition from Ethernet to Wireless LAN Ethernet without having to convert the protocols. The latest encryption and authentication protocols offer at the same time satisfactory protection against unauthorised access. Depending on the environment, Wireless LAN can be used to cover distances between 50 and 300 metres and even more by using special antennas.
      • Beck's new WL01 Wireless LAN module provides the IPC@CHIP® Controller SC123 / SC143 with a fully-fledged Wireless LAN interface and enables both Infrastructure-Mode on an existing access point as well as Adhoc-Mode between several WL01 modules. The Beck IPC module is available from November 2006.
    • IPC@CHIP WLAN
      Cost-efficient Wireless LAN solution for the Beck IPC@CHIP® (+)

      Features:

      • From November 2006 Beck IPC will be offering an industrial wireless LAN extension called WL01 for the IPC@CHIP® Controllers SC123 / SC143. This extension makes it possible to also connect to mobile and distributed automation devices easily via TCP/IP without the need for any proprietary wireless solutions.
      • The connection of the separate and space-saving 23 x 36 x 5 mm add-on module to the IPC@CHIP® is implemented serially via an SPI interface with a maximum transfer rate of 48 MHz. The module supports the latest transmission standards 802.11b and g (11 and 54 Mbit/s in the 2.4 GHz range), as well as the security standards in compliance with 802.11i (WEP and WPA), and offers two antenna terminals for optimising reception and transmission.
      • An FK61-WL01 Development Kit will be offered for users to develop their own Wireless LAN solutions inexpensively and quickly. As well as the WLAN module and an adapter board for the existing DK61 IPC@CHIP® Development Kit, it also contains all the software libraries required, the documentation and a demo implementation with web configurator. It is also possible to configure the Wireless LAN module directly from the application program via a C-API, as well as using the freely adjustable web configurator.
  • Dust Networks  (2)
    • SmartMesh IA-510
      Wireless sensor networking system delivers embedded WirelessHART solutions to industrial automation vendors that are easy to integrate and simple to deploy (+)

      Features:

      • WirelessHART compliance: Interoperability with other WirelessHART field devices and gateways
      • Superior reliability:
      • >99.99 percent reliability, even in the most challenging industrial environments
    • SmartMesh XD
      Provides OEMs with highly reliable, ultra low-power and easy to integrate wireless sensor networking solutions (+)

      Features:

      • Ultra low-power RF technology
      • Innovative radio design consumes 80 percent less power than comparable radios
      • Delivers additional 5X increase in battery life
  • Unex Technology Corporation  (9)
    • DNXA-97
      DNXA-97 is a 802.11n b/g 2T2R in the smallest half-size mini card with PCIe form factor (+)

      Features:

      45199.jpg
      • The smallest half-size mini card with PCIe form factor in 2Tx/2Rx design is ideal for embedding into ultra-compact devices or embedding additional mini cards with complimentary technologies at comparable price points
      • Windows XP/Vista/7 drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
      • Atheros Direct Connect technology, which is forward compatible to the forthcoming Wi-Fi Alliance P2P standard, can establish a direct link with each other without the use of an access point (AP)
    • DNXA-95
      802.11n b/g wifi 1x1 PCIe half-size mini card, HB95/AR9285 (+)

      Features:

      • The smallest PCIe form factor in 1Tx/1Rx design is ideal for embedding into ultra-compact devices or embedding additional mini cards with complimentary technologies at comparable price points
      • Windows 2000/XP/Vista drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
      • Backward compatible to 802.11g and forward compatible to 802.11n provide the optimal upgrade path from legacy 802.11g solutions
    • DNUR-83
      802.11n a/b/g wifi 2x2 USB module, RT2800UD/RT2870+RT2850 (+)

      Features:

      • USB 2.0 module form factor in 5 pins header with proprietary definition in 2Tx/2Rx design is ideal for embedding into new or existing ergonomic devices
      • Windows 2000/XP/Vista, Linux, and optional WinCE 5.0/6.0 drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
      • 802.11n compliance effectively interoperates with other chipsets
    • DNUA-93
      An 802.11n b/g WiFi MIMO USB module designed to provide enhanced WiFi performance for embedded WiFi products that host processors not originally intended to support WiFi functions (+)

      Features:

      42826.jpg
      • Integrated CPU and memory to run more of WiFi function on-chip to offload wireless processing overhead from the host appliance
      • 35 x 18mm small dimension with standard USB connector is ideal for embedding into new ergonomic home gateways, set-top boxes, gaming consoles, printers, and variety of other embedded WiFi products
      • Windows 2000/XP/Vista, and Linux drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration
    • DNXA-125: 11n b/g wifi mini card
      DNXA-125 is a 802.11n b/g 1T1R in the smallest PCIe half-size form factor using AR9485 single-chip solution features Atheros Align technology. (+)

      Features:

      204341291151742810.jpg
      • The smallest PCIe form factor in 1Tx/1Rx design is ideal for embedding into ultra-compact devices or embedding additional mini cards with complimentary technologies at comparable price points.
      • Windows XP/Vista/7 and ath9k drivers enable manufacturers to quickly and easily bring new bandwidth intensive applications to market with trouble-free WiFi integration.
      • Backward compatible to 802.11g and forward compatible to 802.11n provide the optimal upgrade path from legacy 802.11g solutions.
    • RPAA-82 PCBA
      Enterprise Access Point board w/ 2 mini-PCI sockets, PB44/AR7161 (+)

      Features:

      • Optional radio modules of 802.11n DNMA-83, high powered 802.11 a/b/g CM10-H(MMCX), and high-powered FCC 4.9GHz radio provides highest application flexibility to meet challenging RF environments in factories, warehouses, hospitals, and large retail establishments
      • Dual radio design allows simultaneous operation of 2.4 GHz and 5 GHz wireless network to offer the greatest number of available channels on system capacity and scalability
      • 802.3at high-powered POE+ sufficiently supports dual concurrent 802.11n radios to deliver full 3x3 MIMO performance
    • OBU-201: V2X On-Board-Unit
      The OBU-201 is a standalone V2X on-board-unit running on ThreadX RTOS for direct V2X protocol stacks porting. Wide DC 6-32V range in 4-pin power input supports Vbatt and ACC for automotive applications. Extensive I/O connectors provide flexible integration options. Automotive-grade design ensures vibrational and environmental reliability. (+)

      Features:

      312245159151386093.jpg
      • Contains all V2X elements of RF (2*2), modem, security, positioning with pre-integrated firmware on ThreadX (hyperlink http://rtos.com/products/threadx/) RTOS. Optional V2X protocol stacks can be licensed by project.
      • Autotalks CRATON 3-CPU core communication processor, PLUTON RF transceiver, Telit® SL869 GNSS receiver, Infineon® SLE97 HSM, 128MB DDR3, and 32MB NOR with extensive I/O in small standalone box for direct V2X development and deployment.
      • AEC-Q100 qualified V2X chipsets, 4-corner UV cured resin for BGA chips, and automotive-grade components in pin header design ensure vibrational and environmental reliability.
    • RNRA-83 PCBA
      Dual-concurrent 802.11na/ng 2x2 MIMO AP/Router board, AP96/AR7161+AR9220+AR9223+AR8316 (+)

      Features:

      42828.jpg
      • Dual-Concurrent 802.11na and 802.11ng design allows simultaneous operation of 2.4 GHz and 5GHz wireless network to offer the greatest number of available channels on system capacity and scalability
      • Two embedded antenna provides highest flexibility to optimize MIMO performance
      • Enables bandwidth up to 300 Mbps PHY/link rate per radio or 600 Mbps PHY/link rate per Access Point/Router, significantly increases the amount of bandwidth available for user applications
    • VTX-201: V2X DSRC Module
      VTX-201 is a V2X DSRC module with Autotalks firmware on ThreadX RTOS to serve as V2X sub-system. Board-to-board 50-pin header interface and wide 6~40V DC power input range provide consistent DSRC RF performance, high integrative flexibility, and vibrational reliability. (+)

      Features:

      312243190151192703.jpg
      • Sub-system module contains a 3-CPU core processor, a dual channel DSRC RF transceiver, 128MB DDR3, and 32MB NOR enables direct V2X stacks porting and applications on ThreadX RTOS..
      • Class C spectrum masks compliance with +20dBm RF power at MMCX antenna port.
      • Hardware engine provides high ECDSA 256-bit verification performance for all received packets.
  • Sierra Wireless  (1)
    • MC8780 embedded mod
      Fujitsu Siemens Computers has selected the new Sierra Wireless MC8780 embedded module for integration into the newly launched LIFEBOOK P7230 professional notebook. (+)

      Features:

      • The Sierra Wireless MC8780 embedded module offers faster download speeds than previous models, with peak data rates of up to 7.2 megabits per second (Mbps). In addition, it is the first Sierra Wireless module designed for HSUPA networks, with uplink speeds more than five times faster than those available on current networks – up to 2 Mbps. The faster uplink speed is particularly important for customers who routinely send large files over the wireless network while mobile.
      • The LIFEBOOK P7230 is the first in the product line to migrate to the Sierra Wireless HSUPA module and is expected to begin commercial shipments in Europe this summer.
      • “Embedded UMTS enables easy data access whenever and wherever the users are. To optimize the benefits that embedded UMTS brings, speed is an integral part. The improvements to data speed and uplink provided by HSUPA technology are therefore another important step,” said Andreas Thimmel, Senior Vice President Volume Business at Fujitsu Siemens Computers. “We want the LIFEBOOK P7230 to offer the best possible mobile user experience, and collaborating with Sierra Wireless to integrate the latest in mobile broadband technology is a key part of delivering true mobility.”
  • CommAgility  (5)
    • AMC-2C87W3
      Complete Digital Baseband design (+)

      Features:

      44259.jpg
      • L1 PHY (physical layer) L2 RLC/MAC (Radio Link Control/Media Access Control), S1/X2 interface and security processing for LTE (Long Term Evolution) or WiMAX in the compact single width, full-size Advanced Mezzanine Card (AMC) form factor
      • For these advanced wireless applications, the new CommAgility AMC-2C87W3 integrates the PHY, RLC/MAC, transport (including all backhaul and air interface security) and antenna connectivity requirements of eNodeB into a compact solution, and provides end-to-end data handling from raw radio IQ data through to backhaul IP packets
      • The module incorporates the latest WinPath3 Network Processor from Wintegra, which provides a flexible means of handling the Real-time IP packet and security processing and L2 RLC/MAC demands of wireless base stations
    • AMC-3C87F-GPS
      Single-width, full-size Advanced Mezzanine Card for 4G wireless PHY layer processing (+)

      Features:

      • Three Remote Radio Head (RRH) interfaces
      • Integrated GPS receiver
      • OCXO option for timing holdover
    • AMC-6487C
      An Advanced Mezzanine Card offering signal processing performance and bandwidth in a highly compact package (+)

      Features:

      36120.jpg
      • First single-width, full-height AdvancedMC card to be based on Texas Instruments (TI) multicore TMS320TCI6487 DSP
      • Suitable for wireless baseband and other processing-intensive applications such as WiMAX and Long Term Evolution of 3GPP (LTE)
      • Three software programmable TCI6487 DSPs, each containing three high-performance C64x+ cores running at 1 GHz as well as 3 MB on-chip memory
    • AMC-V6
      High performance FPGA-based interface and processing module for wireless baseband applications (+)

      Features:

      46433.jpg
      • For maximum processing power, the AMC-V6 incorporates a Xilinx Virtex-6 FPGA
      • The new module is ideal for wireless radio head interfacing applications requiring multiple CPRI links at up to a 10x (6.144Gbps) line rate
      • The standard variant has an LX240T-2 FPGA, providing a cost-effective processing solution
    • AMC-K2L-RF2
      The AMC-K2L-RF2 is a low-cost, high performance ARM and DSP based processing card based on TI's TCI6630K2L SoC which includes two integrated wideband RF transceiver channels, all in the compact Advanced Mezzanine Card (AMC) form factor. It is designed to support wireless baseband processing and a 2x2 MIMO air interface in radio test systems, small cells, and UEs for standard or specialised LTE and LTE-Advanced systems up to and beyond Release 10. (+)

      Features:

      322455957322726912.jpg
      • Texas Instruments TCI6630K2L SoC DSP
      • TI AFE7500 RF front end
      • Low cost, flexible card for small cells or as RRH
  • Digi International  (2)
    • ConnectCore Wi-MX51
      Core module designed specifically for low-power, wireless multimedia applications (+)

      Features:

      43807.jpg
      • First wireless enabled core module based on Freescale's new high-performance i.MX51 processor
      • First to offer 802.11 a/b/g/n Wi-Fi and first to support Microsoft's new Windows CE 6.0 R3
      • The ConnectCore Wi-MX51 enables wired and Wi-Fi networking for low power embedded applications with demanding performance requirements such as displays within medical devices, digital signage, security/access control devices, point-of-sale equipment and industrial automation technology
    • iDigi start kits
      iDigi is termed “Platform as a Service” (PaaS) for developing wireless applications. With access to a sandbox development environment and other hosted software over a Web services interface, the platform connects to devices seamlessly so developers can focus on applications (+)

      Features:

      41800.jpg
      • The iDigi X4 Starter Kit ZB is ZigBee-based, with an XBee module, wall router, light and temperature sensors, and an IP-to-ZigBee gateway
      • The iDigi Wi-9P Starter Kit ZB has an ARM9 module, Wi-Fi module, ZigBee module and wall router, the same light and temp sensors, and a Python-based software environment
      • The iDigi BL4S100 Add-on Kit ZB adds a Rabbit BL4S100 SBC with its I/O features
  • Phoenix Contact  (4)
    • RAD-80211-XD-BUS
      Wireless Ethernet Radio with modular I/O and firmware capabilities (+)

      Features:

      • Combines truly secure wireless communication with control of up to eight I/O modules
      • Up to 64 digital, analog, and pulse I/O can be interfaced directly to the radio
      • This flexibility saves installed cost for distributed Ethernet wireless I/O monitoring and control applications
    • RAD-ISM-900-EN-BUS
      A busable 900 MHz radio is the newest addition to Phoenix Contact's Trusted Wireless Ethernet (TWE) portfolio of industrial wireless products (+)

      Features:

      • The RAD-ISM-900-EN-BUS allows direct connection of I/O modules to the radio
      • The radio allows the user to collect I/O without a remotely located PLC or I/O data concentrator
      • The bused I/O is made accessible to the network using the readily available MODBUS protocol
    • -SYS-NEMA4X-900
      Radio-ready enclosure simplifies the installation of industrial wireless radio modems and small RTU devices (+)

      Features:

      • Provides robust, secure solution for remote data collection while saving installation time and preventing wiring errors
      • Pre-wired power rail has space for either a Trusted Wireless or GSM/GPRS radio modem and other components
      • 24 VDC power with backup prevents failure of critical operations due to power dips and brownouts, while the surge arrestor protects against lightning and surges
    • RAD-ISM-900-EN-BD/B
      The TWE-Basic (RAD-ISM-900-EN-BD/B) transmits Ethernet data from remote locations, even in h (+)

      Features:

      • The “basic” nature of the product indicates the removal of the standard RS-232 and RS-485/422 ports
      • In addition, the TWE-Basic is a “slave-only” device, so it must be used in conjunction with a standard TWE or TWE-BUS radio acting as the master
      • Like the other Trusted Wireless radios, the basic version features the MOTR-9™ radio platform, a 1-watt, frequency-hopping spread spectrum (FHSS) transceiver
  • Cavium Networks  (1)
    • OCTEON Fusion-M processors
      OCTEON Fusion-M processors are single chip solutions for macro BTS and Smart Radio Heads that target next generation radio networks including 3GPP LTE Rel11/12. (+)

      Features:

      • Highly integrated multi-protocol Smart Radio Head supporting 12 sector 24T24R MIMO with up to 8 cores running up to 2.0 GHz core frequency
      • Simultaneous LTE. LTE-A (FDD/TDD) , HPSA+, GSM operation
      • Allows any Cloud RAN configuration, including various MAC-PHY spits, RLC split and CPRI
  • Ember Corporation  (1)
    • EM250
      The EM250 from Ember provides a true ZigBee System-on-Chip that combines a 2.4GHz IEEE 802.15.4 compliant radio transceiver with a powerful, efficient, industry proven 16-bit microprocessor with comprehensive hardware supported network-level debugging features to simplify development. (+)

      Features:

      • Flexible antenna interface allows easy antenna connection with or without external PA
      • Excellent noise immunity to 802.11b/ g. Exceeds 802.15.4 adjacent/alternate channel rejection specifications for improved co-existence
      • Digital RSSI / 802.15.4 Link Quality Indication
  • WinSystems, Inc.  (5)
    • PPM-Wireless
      IEEE 802.11b/g standard, dual-mode, Wi-Fi-certified wireless LAN support (+)

      Features:

      20939.jpg
      • Up to 54 Mbps at 2.4 GHz
      • Industry-standard wireless LAN security support and upgradeable support for AES software implementation
      • Support for optional antenna for optimized WLAN performance for multi-antenna systems
    • 802.11 Module
      IEEE 802.11b/g Wi-Fi wireless LAN support (+)

      Features:

      • Up to 54 Mbps at 2.4 GHz
      • Industry standard wireless LAN security
      • Supports single or dual antennas
    • Mini
      SUMIT-ISM module supports MiniPCIe cards for a variety of Wireless Technologies (+)

      Features:

      45062.jpg
      • Adds wireless LAN, WPAN, or WWAN communications to SUMIT-based systems
      • SUMIT-ISM module with MiniPCIe and USB support
      • MiniPCIe Connector includes: support for both Full and Half size PCIe MiniCards
    • GPS Receiver Module
      A dual function PC/104-compatible module that supports both a GPS receiver and a socket cellular modem (+)

      Features:

      • GPS receiver provides position, velocity, and time data
      • Supports TSIP, TAIP, and NEMA 0183 protocols
      • Cellular wireless supports both GSM/GPRS and CDMA
    • PCM-GPS
      A dual-function PC/104 module featuring a GPS receiver and cellular modem (+)

      Features:

      25323.jpg
      • Ideal for fixed and mobile embedded applications that require navigation, tracking, data logging, timing, and/or communications functions
      • GPS features: Lassen GPS receiver module provides position, velocity, and time data; TSIP, TAIP, and NEMA 0183 protocols; very low power requirement; supports pulse output for accurate time standard; external powered antenna connection via a standard SMA connector
      • Cellular wireless features: supports both GSM/GPRS and CDMA; socket support for Multitech wireless module; recognizes standard AT commands; alarm management, phone book management, and Short Message Services (SMS); Bluetooth support available soon
  • Atific Oy Ltd.  (1)
    • Multi-radio WSN kit
      High performance FPGA based multi-radio wireless sensor network development kit (+)

      Features:

      • Extremely flexible and fully re-configurable development kit for developing new types of communication protocols, algorihms and computation architectures for mesh networking
      • Four parallel 1 Mbps radios with up to 83 selectable frequency channels allow simultaneous data exchanges with several neighbors
      • Up to four Altera NIOS softcore processors and custom HW accelerators synthesizable on FPGA enable powerful parallel computing and radio access
  • Parsec  (3)
    • PM432
      A single PMC module that leverages on ALTERA Stratix II GX FPGA technology to provide a high-speed, high-bandwidth processing platform, ideally suited for Software Defined Radio (SDR), WiMAX, Radar, Video, as well as other computation and bandwidth intensive applications (+)

      Features:

      41446.jpg
      • Processing FPGA
      • EP2SGX90 ALTERA Stratix II GX FPGA
      • 90,960 Logic Elements, 192 18x18 multipliers and 4.3 Mb RAM
    • PM488: Dual DAC PMC
      Two Analog Devices AD9772A 150MSPS 14-bit DAC converters (+)

      Features:

      20533.jpg
      • SNR of 71dB @ 25MHz and SFDR of 80dB @ 5MHz
      • 50 Ohm AC coupled analog outputs with 67.5MHz reconstruction pass band
      • 32/64-bit 33/66MHz 3.3V PCI interface implemented in Altera Stratix FPGA
    • PM480: Dual ADC PMC
      Two Analog Devices AD6645 105MSPS 14-bit ADCs (+)

      Features:

      20532.jpg
      • SNR of 75dB @ 15 MHz and SFDR of 89dBc @ 70 MHz
      • 50 Ohm AC coupled 100 kHz – 250 MHz analog inputs
      • 32/64-bit 33/66 MHz 3.3 V PCI interface implemented in Altera Stratix FPGA
  • connectBlue  (4)
    • Wireless LAN Rugged Ethernet Port Adapter
      The RWE251s is well-suited for applications where the Ethernet cable needs to be replaced with a robust wireless connection, or when you need to connect to a WLAN infrastructure. The device supports dual-band 802.11abgn which makes it easier to find interference free channels and connect to networks that utilize both the WLAN 2.4 and 5GHz radio bands. The external antenna lets you freely select where to position the RWE251s, for example inside a metal cabinet. Also, since the antenna is omnidirectional you do not need to align the units for optimal wireless connectivity. (+)

      Features:

      234326578822172461.jpg
      • Wireless LAN 802.11abgn technology (dual-band 2.4GHz and 5GHz)
      • Ethernet interface 10/100Base-T
      • External omnidirectional antenna with RPSMA connector
    • Wireless LAN module OWL253
      The Wireless LAN Module OWL253 has been developed for integration in industrial, medical, and other demanding devices providing state of the art low power features and dual-band support for both 2.4GHz and 5GHz radio bands. The accompanying software driver works as interface between the TCP/IP stack in the device and in the module. The module minimizes the work needed to implement Wireless LAN (IEEE 802.11a/b/g/n) in a device as it provides all hardware, type approval, EMC certification etc. It is developed for reliable, high demanding devices and applications. [...] (+)

      Features:

      188555544621095023.jpg
    • Multiradio System-on-Module OMP171
      The OMP171 is a powerful, compact and adaptable System-on-Module with multiradio wireless capabilities, Linux OS and dual Ethernet RMII. The wireless support includes Bluetooth v4.0 with Classic Bluetooth and Bluetooth low energy, plus WLAN with dual-band support for 2.4 GHz and the full 5 GHz band. In the powerful CPU, customer developed applications can easily be implemented on top of the optimized Linux kernel. This allows for high-performing and cost-effective solutions, such as gateways with advanced protocol conversion and cloud access for IoT applications. (+)

      Features:

      265860092822359992.jpg
      • Linux System-on-Module with multiradio wireless technologies
      • 800 MHz TI Sitara ARM Cortex A8
      • 256 MB DDR3 RAM
    • Bluetooth Rugged Ethernet Port Adapter R
      The Bluetooth Rugged Ethernet Port Adapter RBE231 is suitable for industrial installations, transportation and data acquisition where you can replace the Ethernet cable with a robust and maintenance-free Bluetooth connection. The RBE231 is also referred to as Intelligent Antennaâ„¢ thanks to the ease of use and cost efficiency of the installation and configuration. Another feature of the RBE231 is the Low Emission Modeâ„¢ which solves potential interference disturbances between Bluetooth technology and Wireless LAN that is not handled by the Bluetooth implementation of AFH. (+)

      Features:

      188974841621095023.jpg
      • Bluetooth 2.1+EDR (3.0 prepared via firmware upgrade)
      • Long range of 1000 meters
      • Ethernet interface 10/100Base-T
  • GreenPeak Technologies  (1)
    • GP501
      A new generation of ZigBee transceivers with a coexistence scheme that allows Wi-Fi, Bluetooth, and ZigBee chips to work side by side in the same device (+)

      Features:

      • ZigBee shares the 2.4 GHz frequency band with other Wi-Fi equipment, resulting in potential RF interference when operating simultaneously
      • The GP501 has a coexistence interface that enables arbitration over the shared radio frequency medium to prevent contention, signal degradation, and data loss
      • A new feature of the GP501 ZigBee transceiver chip is the Deep Packet Inspection (DPI) for ZigBee applications allowing the host processor to go into a deep-sleep mode to conserve power
  • A and D Medical  (1)
    • XL-25ANT
      eHealth Wireless Activity Monitor (+)

      Features:

      • Automatically tracks distance, activity time, and steps
      • Calculates calories burned
      • Simple, easy to use - no buttons to press
  • Intrinsyc Software  (1)
    • i-RIL and i-MUX
      The i-RIL (Intrinsyc Radio Interface Layer) and i-MUX (Intrinsyc Multiplexer) are off-the-shelf software components for wireless handheld development (+)

      Features:

      • Can be used with wireless handhelds based on Windows Mobile 2003 software for Pocket PCs and Smartphones
      • i-RIL provides the underlying technology for enabling wireless voice or data applications using Windows Mobile software to communicate with a GSM/GPRS or CDMA2000 modem
      • It is a customized layer of software code that operates with Microsoft's Cellcore telephony stack
  • Microchip Technology, Inc.  (1)
    • WINC1500
      Microchip’s WINC1500 is an IEEE 802.11 b/g/n Internet of Things (IoT) module that is specifically optimized to help you easily add Wi-Fi® to your low-power IoT applications. It is the ideal add-on to existing microcontroller (MCU) solutions bringing Wi-Fi and network capabilities through UART or SPI-to-Wi-Fi interfaces into embedded applications. To help accelerate design development even more, Microchip offers the WINC1500 as a single-chip module for fast integration. This highly integrated module has a small form factor (21.7 × 14.7 × 2.1 mm) and is fully certified. (+)

      Features:

      3756075818613111909.jpg
      • 2.4 GHz IEEE 802.11 b/g/n IoT solution
      • Ultra-low power (4 Î?A in Power Save Mode)
      • Operating voltage: 3.0V to 4.2V
  • Mercury Systems  (7)
    • ECDR-214-PMC
      An A/D converter and digital drop receiver PMC mezzanine (+)

      Features:

      • Suitable for wideband and narrowband down conversion and filtering
      • Data decimation range from 2 to 16384
      • Analog signals are converted using Analog Device's AD6644, 14-bit, 65 MHz A/D converters
    • ECDR-112-E
      100 MHz EFFECTIVE BANDWIDTH (460 MSPS) (+)

      Features:

      • 12 BIT A/D CONVERTERS; 4 TIMES OVERSAMPLING
      • A/D AUTO-CALIBRATION
      • 16 BIT ACCURATE NCO
    • ECDR-412
      4-channel wideband/narrowband digital receiver (+)

      Features:

      • Accepts two analog signals at 70 MHz for direct digitization via Analog Devices' AD6620 digital decimating receivers
      • Spur-free dynamic range of 100 dB
      • Programmable FIR filters with 256 taps at 65 MHz clock speed
    • ECDR-1-1480-PMC
      14 BIT, 80 MSPS ANALOG TO DIGITAL CONVERTER (ANALOG DEVICES AD6645) (+)

      Features:

      • USER PROGRAMMABLE NUMERICALLY CONTROLLED OSCILLATOR
      • USER PROGRAMMABLE 63-TAP FIR FILTERS
      • 16K x 32 FIFO BUFFER FOR RECEIVER DATA. OTHER DEPTHS AVAILABLE
    • ECV4-RFT
      A mixed-signal module with capability to coordinate data streams to and from sets of spatially distributed sensors (+)

      Features:

      • Based on COTS technology
      • Combines high-speed A/D and D/A technology, Xilinx Virtex-4 FPGA reconfigurable processors, and fiber I/O
      • Suitable for wideband applications that require a blend of powerful remote processing and low-latency data transfer
    • ECDR-4814
      A 48-channel wideband/narrowband digital receiver with integrated analog input (+)

      Features:

      • 14-bit A/D
      • Four analog input channels using Analog Devices AD6644 A/D converter
      • 48 receiver channels operating at 70 Msamples/sec using GrayChip 4016 quad digital down converter chips
    • Echotek Series ECV4-2
      The ECV4-2, with input clock capability up to 1.5 GHz, is the highest performing digital receiver in an XMC form factor in the industry (+)

      Features:

      • Echotek Series products lead the mixed-signal industry in extracting clear signals from electronic clutter, forming a bridge between the realms of analog signals and digital processing. After an analog signal is received by an antennae or other sensor, it must be digitized and manipulated into a form amenable to signal processing. The challenge, and the key to successful applications, is to manage this transformation in real time while maintaining the integrity of the original signal
      • Processing power is delivered by a Xilinx Virtex-4 FPGA (field-programmable gate array). This FPGA allows users to run customized algorithms such as digital down/up conversion (wideband or narrowband), Fast Fourier Transforms (FFTs), and filtering directly on the ECV4-2. Modules are available in air-cooled or conduction-cooled versions [...]
  • L&T Infotech  (1)
    • LTE UE Protocol Stack
      LTE protocol stack (+)

      Features:

      • Solution comprises Access Stratum and Non Access Stratum (NAS) layers as defined by 3GPP standards
      • Compliant to March '09 3GPP Release 8, LTE specifications
      • The design is modular to accommodate further releases of the Release 8 Standard
  • Integrated Device Technology, Inc.  (1)
    • IDT70K2000 PPS
      Serial RapidIO pre-processing switch targeting DSP clusters and accelerates wireless baseband processing applications, while supporting the serial RapidIO interconnect specifications (+)

      Features:

      31724.jpg
      • integrates a suite of byte- and packet-level manipulation capabilities designed to offload bandwidth intensive tasks from the DSPs, allowing wireless base station designers to create scalable, flexible, and cost-effective solutions
      • The result can be an acceleration of each DSP in a cluster by up to 20 percent, enabling the DSPs to focus on other compute-intensive functions in wireless base stations
      • Central to the DSP Farms processing architecture and performs a variety of data processing on the payload of sample packets to accelerate the subsequent algorithmic operations of a receiving processor (DSP, CRP, FPGA)
  • AeroComm Inc.  (2)
    • ZB2430
      AeroComm Extends Breadth of ZigBee™ Your Way™ Transceiver Product Line (+)

      Features:

      • best-in-class output power
      • best-in-class receive sensitivity
      • best-in-class line-of-sight range
  • Kontron  (1)
    • GateSync System
      The Kontron eTWLU features the high performance PowerPC processor architecture. In order to ensure maximum connectivity throughput and reliability to off-aircraft networks the Kontron eTWLU is integrated with multiple radios -- two 802.16-2006 WiMAX radios supporting 10MHz channels operating from 5.725 – 5.875 GHz, a single 802.11a/g Wi-Fi radio, and a GPRS/EDGE/HSPA-capable GSM radio. The multi-radio approach maximizes the aircraft’s ability to communicate with ground networks. Also, an internal GPS receiver reports equipment locations to the GateSync network operations center (NOC) and software management system. (+)

      Features:

      • .
      • . [...]
  • Laird Technologies  (1)
    • First LoRa+BLE wireless module for IoT
      Laird has introduced a new line of wireless modules that integrate long-range LoRa technology and short-range BLE technology for the first time in a commercial solution, giving companies the ability to create longer-range EIoT systems than previously possible with a single module. The RM1xx product family enables companies to dramatically expand the locations where IoT can be deployed by using the combination of long-range LoRa wireless technology and ultra low-power BLE technology integrated in the same module. http://www.lairdtech.com/products/rm1xx-lora-modules. (+)

      Features:

      342254675231494739.jpg
      • can transmit and receive data wirelessly between IoT deployments and gateways up to 10 miles apart (or longer with relays)
      • Integrating BLE with LoRa enables companies to deploy IoT networks that can go nearly anywhere, utilizing BLE for short-range, low-power connectivity between wireless devices while taking advantage of LoRa for communications over distance
      • In an industrial setting, for example, the RM1xx can monitor sensors on water, fuel, and chemical tanks throughout a facility via wireless low-power BLE technology or any traditional I/O connections
  • Lyrtech  (2)
    • WiMAX RF modules
      WiMAX RF modules are WiMAX, RF, analog front ends for Lyrtech small form factor (SFF) software defined-radio (SDR) development platforms (+)

      Features:

      45761.jpg
      • 2.3 to 2.7 GHz RF module
      • 3.3 to 3.8 GHz RF module
      • Superheterodyne receiver (IF baseband equals 44 MHz)
    • Tunable RF modules
      Tunable, RF, analog front end designed for Lyrtech small form factor (SFF) software defined-radio (SDR) development platforms (+)

      Features:

      45759.jpg
      • Low-band module – 0.2–1.0 GHz
      • High-band module – 1.6–2.3 GHz
      • Superheterodyne receiver (IF = 30 MHz)
  • Aeroflex Laboratories, Inc.  (2)
    • 3036 RF digitizer module
      3036 RF digitizer module, with frequency range extending to 13 GHz, for use in vector signal analysis of complex RF signals (+)

      Features:

      184245997184183131.jpg
      • Operates over the band 250 kHz -13 GHz
      • Up to 90 MHz wide digitized -1 dB bandwidth
      • 13-bit ADC resolution
    • 3060
      3060 RF combiner module (+)

      Features:

      • designed specifically for RF component and radio terminal system test
      • four-port RF combiner covering 300 MHz - 2.5 GHz
      • enables low-cost modular RF test system design
  • AVIDwireless  (1)
    • AVIDdirector-M2M Model 200
      Imsys Java processor, Cypress PSoC mixed-signal array, and connection options including a wide selection of cellular, Bluetooth, ZigBee, 900 MHz, and other wireless radio technologies (+)

      Features:

      36925.jpg
      • Powerful Machine-to-Machine (M2M) interface platform
      • Supports a complete Java environment, including Java 2 Micro Edition (J2ME), Java Native Interface (JNI), and M2MXML, along with a complete set of networking tools
      • The system is open for adding wireless radio boards, simple serial or general-purpose I/O-connected devices, or user-developed boards via an expansion interface [...]
  • Oceana Sensor  (1)
    • Wireless Sensor Module
      Wireless Sensor Module (WSeM), working with GainSpan and Quickfilter Technologies for the newest and smallest in integrated Wi-Fi and A/D chipset technology (+)

      Features:

      34929.jpg
      • Measures 17 mm x 39 mm
      • Contains an analog to digital converter/filter, an onboard ARM7 processor, and 802.11 wireless communication capability all on one PCB
      • Can accommodate up to four different analog sensor inputs
  • Fortress Technologies  (1)
    • ES2440 Mesh Point
      The ES2440 is a high performance, high capacity, multi-radio next generation secure wireless mesh point that enables local access as well as wide area coverage (+)

      Features:

      • Quad MIMO radios supporting 802.11 a/b/g/n
      • Hardware crypto FPGA with > gigabit speed inline encryption
      • Multiple radio options to support unlicensed 2.4 GHz, 5.8 GHz and licensed 4.4 GHz and 4.9GHz
  • GE Appliances  (1)
    • Nucleus
      5 W plug computer that gathers energy usage data from the in-home smart network (+)

      Features:

      45626.jpg
      • One ZigBee radio for a smart meter
      • One ZigBee radio for appliances
      • Wi-Fi connection
  • Nordic Semiconductor  (1)
    • nRF52840 Advanced multiprotocol SoC
      The SoC was the first Bluetooth 5 chip on sale, and supports 802.15.4 for protocols like Thread and will support Bluetooth mesh. Hardware ensures rapid execution of advanced algorithms and software supports multiple protocols, network topographies, and ease of application development. The SoC is the most capable in class with ARM M4F MCU, 104 dBm multiprotocol radio, large Flash/RAM, 48 GPIOs ,and NFC, yet power consumption is lower than less-capable alternatives. A unique software architecture protects the stack from corruption during application development. (+)

      Features:

      3686132525717332015.jpg
      • Large Flash and bandwidth support rapid and secure over-the-air updates. [...]
  • Innovative Integration  (4)
    • FMC Family
      Innovative Integration's FMC Family offers a wide range of dense, high-performance I/O solutions in VITA57 form-factor. The FMC standard requires only the core I/O transceiver circuitry that connects directly to the FPGA on the carrier card.  The resulting efficiencies translate to substantial benefits. The FMC modules deliver a wide range of solutions:  High Speed digitizing Signal Generation for wireless Transceiver Pulse Generation, Medical Imaging, Precision Recording/Playback, RADAR, LTE WiMAX Physical Layer, Wireless Receiver and Transmitter, Remote Radio Head receiver, OBSAI and CPRI interface, Serial FPDP and SRIO fiber optic ports. FEATURES: High speed digitizing and signal generation FMC I/O modules FMC-1000 Module with 2x 1000 MSPS 14-bit A/D, 2x 1000 MSPS 16-bit DAC with PLL and Timing Controls FMC-500 Module with 2x 500 MSPS 16-bit A/D, 2x 1230 MSPS 16-bit or 1x 1GSPS DAC with PLL and Timing Controls FMC-310 Module with 4x 310 MSPS 16-bit A/D with PLL and Timing Controls FMC-250 FMC Module with 2x 250 MSPS 16-bit A/D, 2x 500 MSPS 16-bit or 1x 1GSPS DAC with PLL and Timing Controls FMC-SFP+ FMC Module with Four SFP+ Ports [...] (+)

      Features:

    • FMC-1000M
      Innovative Integration’s FMC Family of Modules: Module        A/D             D/A FMC-1000 2x1250MSPS • 14b       2x1250MSPS • 16b FMC-500 2x500MSPS • 14b         2x1230MSPS • 16b FMC-310 4x310MSPS • 16b FMC-250 2x250MSPS • 16b         2x500MSPS • 16b FMC- Servo 8x500KSPS • 16b       8x500KSPS • 16b FMC-SFP+                      4xSFP+ Ports FMC-QSFP                     2xQSFP Ports FMC-SDF 4x1MSPS • 14b          1x1MSPS • 16b FMC-10GE                      2x10Gbe ePC-K7 only (+)

      Features:

      333885797491724299.jpg
      • High Speed Digitizing Signal Generation for Wireless Transceiver Pulse Generation,
      • Medical Imaging, Precision Recording/ Playback
      • , RADAR, LTE WiMAX Physical Layer, Wireless Receiver and Transmitter
    • Quixote Complete SDR Solution
      1 GHz TMS320C6416 DSP (+)

      Features:

      22229.jpg
      • 2 to 6 MGATE Virtex-II FPGA
      • 32 MB SDRAM, 8 MB ZBT SBSRAM
      • AD6645 and AD9764 converters
    • Quixote 64-bit 6U
      A 64-bit CompactPCI 6U board for advanced signal capture, generation, and co-processing (+)

      Features:

      • 1 GHz TMS320C6416 DSP and 2 to 6 MGATE Virtex-II FPGA
      • 32 MB SDRAM, 8 MB ZBT SBSRAM and AD6645 and AD9764 converters
      • 64/32 bit CompactPCI, 66 MHz, 5 V/3.3 V and complex trigger modes with HW event logging
  • MaXentric Technologies  (1)
    • CALRADIO
      First generation of general broad application radio/networking test platforms for wireless research and development (+)

      Features:

      39184.jpg
      • It provides a simple, low-cost platform for 802.11b development from the MAC layer and up
      • Consists of three hardware components: MP Board, RF Module and enclosure, and the software/firmware to drive it
      • The MP board contains all the digital processing, memory, 802.3 Ethernet interface, and serial interface
  • Texas Instruments, Inc.  (3)
    • Arria V FPGA RF Development Kit
      Altera Corporation and Texas Instruments Incorporated introduced a complete RF development kit that eases RF prototyping for systems based on Altera’s 28-nm Arria® V FPGAs. The modular Arria V FPGA RF Development Kit includes all the hardware and software needed for RF transmit, receive and digital pre-distortion feedback, reducing the amount of time needed to design and verify RF systems, such as wireless base stations, remote radio heads, and military radio and intelligence equipment, from months to weeks. (+)

      Features:

      205838756018942714.jpg
      • receive and digital pre-distortion feedback
      • , reducing the amount of time needed to design and verify RF systems
      • 2.5 times more transmit and digital pre-distortion feedback bandwidth
    • MSP-EXP430FG4618
      Development Tool Includes Two TI MSP430 MCUs, Chipcon RF Module Connector for Accelerated Ultra-Low Power Design (+)

      Features:

      • Along with the two 16-bit MSP430 devices, the board includes a TI (Chipcon) radio frequency (RF) module connecter for developing low power wireless networks
      • The F2013 is a small 4 mm x 4 mm, 14-pin device that features a fully programmable clock system that provides wake-up from an industry leading 500 nano-amp standby to full-speed operation in less than one micro-second
      • The F2013 device also includes a 16-bit sigma-delta analog to digital (ADC) for high-precision sensing systems, 2 KB of flash and 128 KB of RAM memory, and a basic serial communication interface (USI) which makes SPI and I2C implementations easy
05/20/19 03:32
Close

Subscribe to Embedded Wireless updates