The FMC-250 is a high speed digitizing and signal generation FMC I/O module featuring two 250SPS A/D channels and two 250 MSPS D/A channels supported by sample clock and triggering features. The FMC-250 features two 16-bit 250SPS A/Ds, either AC or DC coupled, plus two 250SPS update rate DACs. The DAC can be used a single 500 MHz output channel. Analog I/O is either AC or DC coupled. Receiver IF frequencies of up to 125 MHz are supported. The sample clock is from either an ultra-low-jitter PLL or external input. Multiple cards can be synchronized for sampling. The FMC-250 power consumption is 6W for typical operation. The module may be conduction cooled using VITA20 standard and a heat spreading plate. Ruggedization levels for wide-temperature operation from -40 to +85C operation and 0.1 g2/Hz vibration. Download Data Sheets and Pricing NOW! FEATURES: Two A/D Inputs – 250 MSPS, 16-bit 250 MSPS, 16-bit option – AC or DC coupled Two D/A Outputs – 250 MSPS, 16-bit D/A 500 MSPS single channel mode – Sample clocks and timing and controls External clock/reference input – Programmable PLL 100 MHz, 0.5 ppm reference – Integrated with FMC triggers High Pin Count no SERDES – Compatible with 1.2 to 3.3V VADJ Power monitor & controls – 6W typical (AC-coupled inputs) Conduction Cooling per VITA 20 subsetEnvironmental ratings for -40 to 85C – 9g RMS sine, 0.1g2/Hz random vibration Applications: Wireless Receiver &Transmitter, LTE, WiMAX Physical Layer, RADAR, Medical Imaging, High Speed Data Recording and Playback [...] (+)