Embedded Wireless

Showing results for: wireless sensor network
Refine Embedded Wireless companies and products:
embedded wireless m2m onstar lte wimax white-space near-field communications nfc wireless 802.11 wi-fi zigbee 802.15 802.15 4 module 802.15.4 airbee airbee wireless cc2420 cc2430 chipcon cc2420 compxs em2420 home automation homerf ieee 802.15 ieee 802.15 4 ieee802.15.4 long range wireless mc13191 mc13192 mesh networking module radio rf modems rf module rf modules rf receiver rf transceivers rf transmitter wireless remote control wireless sensors wpan wpans zdo zig bee zigbee-ready zigby zmd wireless sensor networks wireless sensor network
Click on any vendor
to see a listing of
wireless sensor network related products.
  • SMC Networks  (11)
    • SMC2870W
      A 2.4-GHz, 54 Mbits/sec, wireless, multi-mode, 802.11g adapter (+)

      Features:

      • Installs and communicates without drivers
      • Configurable as: a wireless access point, to provide network access to other wireless 802.11g and 802.11b devices; as a repeater, through its support for Wireless Distribution System (WDS), to extend the range of a wireless 2.4-GHz network using either a point-to-point or point-to-multipoint configuration; or as a wireless adapter, to connect virtually any Ethernet-capable device into a wireless network
      • Fully compliant with IEEE standards
    • SMC2586W-G
      A 2.4-GHz, 802.11g wireless bridge (+)

      Features:

      • Bridges two or more wired LANs
      • Configurable as an access point/bridge, bridge master, or bridge slave
      • Security features include 64-bit or 128-bit key WEP wireless data encryption, 802.1x, Wi-Fi protected access (WPA), disabled SSID broadcast, wireless client isolation, and MAC address filtering
    • SMC2671W
      A 2.4-GHz, 11-Mbit/sec, wireless Ethernet adapter (+)

      Features:

      • Platform independent network adapter
      • Plug-and-play installation; no drivers required
      • 802.11b compliant
    • SMC2862W-G
      A 2.4-GHz, 54-Mbps, USB 2.0 WLAN adapter that provides wireless conectivity for Windows-based devices (+)

      Features:

      • Compatible with USB 1.0, 1.1, and 2.0
      • Connects to IEEE 802.11g or 802.11b wireless networks
      • Includes the EZ Installation Wizard
    • EliteConnect Wireless
      An 802.11a/g universal wireless access point and CardBus adapter (+)

      Features:

      • Provides secure, high-performance wireless access for more than 128 simultaneous users
      • Managed via a Web interface or EliteView management software for SNMP-based management
      • Authentication and security features include WPA, 802.1x authentication, support for FUNK Odyssey and Microsoft RADIUS server, and RADIUS MAC address authentication [...]
    • SMC2670W
      A 2.4 GHz frequency band, wireless Ethernet adapter (+)

      Features:

      • Converts any Ethernet-equipped device into a wireless network device
      • Plug-and-play; no drivers required
      • Compliant with IEEE 802.11b
    • SMC2621W-x
      A line of 11 Mbits/sec wireless print servers for parallel (SMC2621W-P) or USB (SMC2621W-U) printing devices (+)

      Features:

      • Built-in Ethernet port and an 11 Mbits/sec, 802.11b wireless client onboard
      • Supports both ad-hoc mode and infrastructure mode
      • Includes EZ Installation and Setup wizard
    • SMC2552W-G
      A 2.4-GHz, 802.11g wireless access point (+)

      Features:

      • Provides secure, high-performance, enterprie-class 802.11b and g network access
      • Wi-Fi protected access, up to 152-bit WEP encryption, AES, 802.1x authentication access control with key rotation, support for FUNK Odyssey, and Microsoft RADIUS Server
      • Up to 256 MAC address authentication, open/share authentication, disabled SSID broadcast, and up to 16 virtual LANs
    • EZ-Stream Receiver
      A high-end, networked entertainment receiver that streams, plays, and shares audio (including Internet radio), pictures, and video (+)

      Features:

      • Connects to a wired or wireless network for access to Internet resources
      • Links to entertainment devices, inluding televisions and stereo receivers, via standard A/V connectors
      • Uses 802.11a/g technology for universal compatibility, speed, and bandwidth
    • SMC2632W
      A 2.4 GHz frequency band, wireless LAN PC card (+)

      Features:

      • Compliant with IEEE 802.11b
      • Data rates up to 11 Mbits/sec
      • Operating range up to 1,155'
    • SMC2512W-B/AG
      A set of two high-power wireless PCI cards for 802.11b (SMC2512W-B) and universal 2.4/5 GHz (SMC2512W-AG) applications (+)

      Features:

      • The SMC2512W-B provides 802.11b connectivity with up to 200mW of transmit power, operating range of up to 2,700 feet, and seamless operation on any 802.11b or 802.11g network
      • The SMC2512W-AG provides universal connectivity to any 802.11a, b, or g network, 100mW of transmit power, and an operating range of up to 2,145 feet
      • Includes an EZ Installation wizard
  • Airbee Wireless  (2)
    • Airbee ZMAC
      Fully ZigBee ready and complies completely with IEEE 802.15.4 specifications (+)

      Features:

      • Ready for integration with any application code enabling short-range wireless com
      • MAC (Medium Access Control) - The IEEE 802.15.4 MAC contains the protocol stack that enables peer-to-peer secure communications and performs management of peer and network connectivity with other ZigBee devices
      • Airbee-ZMAC is the foundation for wireless networking utilizing either Star or Mesh network topologies
    • Zigbee Network
      Airbee-ZNS, the ZigBee-ready protocol stack software is designed for maximum portability among various 802.15.4 radios and a host of microcontrollers (+)

      Features:

      • Physical Layer – The PHY layer bridges the rest of the stack components to the transceiver (RF) hardware, handles real-time hardware events such as interrupts, and manages the transmission and reception functions pertaining to the RF and the microcontroller as required by the upper layers. Timer and clock services, which collectively form the heart-beat of the system, are generated, managed and supplied to the entire system from the PHY layer; the PHY layer interfaces with peripheral and application devices
      • Media Access Control (MAC) layer – The MAC sublayer provides the interface between the Network Layer and the PHY layer
      • Essential features of MAC sublayer are beacon management, channel access through slotted/unslotted CSMA mechanism, and guaranteed time slots (GTS) management
  • Advantech Corporation  (9)
    • EKI-6311G
      Advantech Introduces 802.11b/g Industrial Wireless Access Point (+)

      Features:

      41480.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-6311G 802.11 b/g Wireless Access Point, Client Bridge and Repeater, which offers standards-based and license-free wireless connectivity for industrial devices, equipment, and applications
      • For maximum flexibility, the EKI-6311G supports multiple operating modes
      • As an Access Point, it allows wireless devices to communication with each other and with 10/100Base-TX Ethernet wired networks
    • EGD-4100W/4110W
      The EDG-4100W and EDG-4110W are RS-232 or RS-422/485 to WLAN data gateway modules (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the EDG-4100W and EDG-4110W, serial to wireless 802.11b boards for enabling wireless networking
      • Their 54 x 59 mm compact design can fit into almost any legacy OEM serial device and connect it to the wireless Ethernet world. Virtual COMport mapping is provided by both modules for convenient communications with the host PC through an 802.11b wireless network
      • The inclusion of digital I/O is a competitive advantage over similar modules
    • EGD-4100W and EDG-4110W
      RS-232 or RS-422/485 to WLAN data gateway modules (+)

      Features:

      • Serial to wireless 802.11b boards for enabling wireless networking
      • 54 mm x 59 mm compact design can fit into almost any legacy OEM serial device and connect it to the wireless Ethernet world
      • Virtual COMport mapping is provided by both modules for convenient communications with the host PC through an 802.11b wireless network
    • EKI-6311GN
      Advantech Introduces an 802.11n Wireless Access Point for High-Speed Transmissions (+)

      Features:

      46262.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-6311GN, an IEEE 802.11n industrial wireless access point. The EKI-6311GN delivers three times the throughput rates of a normal 802.11g. It is fully backward compatible with legacy 802.11b/g frequencies. With the support of STP, WMM, and IGMP snooping protocols, the EKI-6311GN effectively improves the reliability of wireless connectivity. The EKI-6311GN can achieve data rates up to 150Mbps, which allows high-speed internet access with various data and network video surveillance transmissions. It provides 600mW high output power for long-range deployment up to 5km. Also, a Power over Ethernet injector enables a unified supply of data and power through a standard Ethernet cable. To maximize wireless network security and privacy, the EKI-6311GN incorporates 64/128/152-bit WEP data encryption, WPA, WPA2, 802.1x, which can filter external user and prevent illegal attacking. Some other EKI-6311GN features include, embedded 8dBi directional antenna with external N-type connector, wide operating temperature range (-20 ~ 70°C), and IP55 waterproof certification. [...]
    • ADAM-4570W
      A cost-effective data gateway between RS-232/422/485 and 802.11b wireless LAN interfaces (+)

      Features:

      • The ADAM-4570W is functionally transparent, efficient, and cost effective when legacy H/W and S/W must continued to be used
      • Brings the advantage of remote management and data accessibility to RS-232/422/485 devices that cannot connect to the Wireless Ethernet network
      • Supports 802.11b
    • ADAM-6000W series
      Advantech launches Wireless Ethernet I/O Modules (+)

      Features:

      • (Cincinnati, Ohio – 11/17/2005) - The Industrial Automation Group of Advantech introduces the ADAM-6000W series wireless Ethernet digital I/O modules equipped with an embedded JAVA web page for remote status and control.
      • The ADAM-6050W, ADAM-6051W, and ADAM-6060W meet many diverse applications as they are equipped with numerous features and functions known as Smart I/O. The inputs can be configured to read a frequency signal, act as a counter, latching input or normal input. The outputs can be configured as pulse outputs, delayed outputs, and standard output. The output modules have a built-in communications watchdog which allows each output channel to be set to a known state if communication is lost. The user friendly interface allows for simple changes to the embedded JAVA web page without requiring JAVA programming knowledge. The units allow eight simultaneous web clients for viewing I/O status and control, if needed.
      • The ADAM-6000W series I/O modules use a wireless Ethernet standard IEEE802.11b as it is the most popular wireless network. They support Modbus/TCP and UDP protocols. These units handle industrial power and can be din-rail or panel mounted. The I/O design is suitable for applications such as building automation, environmental monitoring, production monitoring, and facility management.
    • EKI-7659CPI
      Advantech Launches an 8+2 Gigabit Combo Port Managed PoE Ethernet Switch (+)

      Features:

      44402.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-7659CPI, an Industrial Managed PoE Ethernet Switch
      • This PoE switch not only features eight PoE ports, but also provides two Gigabit Ethernet ports, allowing high speed communications for many different industrial applications
      • Furthermore, the EKI-7659CPI supports IP-based monitoring and control, allowing users to access up to eight devices connecting through a standard web browser to check power status, shutdown, restart, and more
    • TREK-776 Vehicle Mounted PC
      Vehicle mounted platform designed to withstand the harshest environments (+)

      Features:

      33790.jpg
      • Variety of optional wireless and wide area network modules for real-time communication and data capture in warehouses, freezers, docks, or container yards
      • Rugged die-cast aluminum enclosure replaces the fan as it helps dissipate heat
      • Specially designed without ventilation holes, allowing the front bezel, back cover, and sides to be IP65 compliant for protection against dust and water
    • PCM-3202i
      2-port AMONet RS-485 PCI-104 Master Control Card (+)

      Features:

      40238.jpg
      • Supports two independent Advantech Motion Network (AMONet) RS-485 master rings with each ring controlling up to 2048 I/O points, 256 axes, or a combination of I/O points and axes for motion control
      • The PCM-3202I allows direct data transfer between master and slaves without any operations in between
      • This customized solution saves wires, covers long distances, and supports high-speed real-time communications
  • SENA Technologies  (2)
    • PSx10W Series
      Wireless Device Server product line (+)

      Features:

      35186.jpg
      • 802.11b/g type wireless network interface, WPA2 and 802.11i compliant wireless security
      • flexible operation mode
      • TCP/UDP multicasting, telnet COM port control protocol support (RFC2217 compliant)
    • Promi-SD Adapter
      The Promi-SD is a Bluetooth serial adapter product line designed to replace RS-232 serial cables with wireless connectivity when interconnecting peripheral devices (+)

      Features:

      • Provides transparent RS-232 serial cable replacement
      • Supports Bluetooth Serial Port Profile and Generic Access Profile
      • Interoperability with PDA, laptops, and more
  • Beck IPC GmbH  (2)
    • WLAN Solution
      Fast and Affordable Implementation of Wireless LAN Solutions with the IPC@CHIP® from Beck (+)

      Features:

      • Pohlheim, November 7, 2006 – Ethernet has largely become well-established in the industrial environment. However, there are still many applications that cannot be implemented with Ethernet, such as mobile systems or spatially separated stations in large machine halls or in the open field.
      • In these cases Wireless LAN technology (or WLAN for short) is ideal as a replacement for Ethernet since the TCP/IP protocol used enables the transparent transition from Ethernet to Wireless LAN Ethernet without having to convert the protocols. The latest encryption and authentication protocols offer at the same time satisfactory protection against unauthorised access. Depending on the environment, Wireless LAN can be used to cover distances between 50 and 300 metres and even more by using special antennas.
      • Beck's new WL01 Wireless LAN module provides the IPC@CHIP® Controller SC123 / SC143 with a fully-fledged Wireless LAN interface and enables both Infrastructure-Mode on an existing access point as well as Adhoc-Mode between several WL01 modules. The Beck IPC module is available from November 2006.
    • IPC@CHIP WLAN
      Cost-efficient Wireless LAN solution for the Beck IPC@CHIP® (+)

      Features:

      • From November 2006 Beck IPC will be offering an industrial wireless LAN extension called WL01 for the IPC@CHIP® Controllers SC123 / SC143. This extension makes it possible to also connect to mobile and distributed automation devices easily via TCP/IP without the need for any proprietary wireless solutions.
      • The connection of the separate and space-saving 23 x 36 x 5 mm add-on module to the IPC@CHIP® is implemented serially via an SPI interface with a maximum transfer rate of 48 MHz. The module supports the latest transmission standards 802.11b and g (11 and 54 Mbit/s in the 2.4 GHz range), as well as the security standards in compliance with 802.11i (WEP and WPA), and offers two antenna terminals for optimising reception and transmission.
      • An FK61-WL01 Development Kit will be offered for users to develop their own Wireless LAN solutions inexpensively and quickly. As well as the WLAN module and an adapter board for the existing DK61 IPC@CHIP® Development Kit, it also contains all the software libraries required, the documentation and a demo implementation with web configurator. It is also possible to configure the Wireless LAN module directly from the application program via a C-API, as well as using the freely adjustable web configurator.
  • Sierra Wireless  (1)
    • MC8780 embedded mod
      Fujitsu Siemens Computers has selected the new Sierra Wireless MC8780 embedded module for integration into the newly launched LIFEBOOK P7230 professional notebook. (+)

      Features:

      • The Sierra Wireless MC8780 embedded module offers faster download speeds than previous models, with peak data rates of up to 7.2 megabits per second (Mbps). In addition, it is the first Sierra Wireless module designed for HSUPA networks, with uplink speeds more than five times faster than those available on current networks – up to 2 Mbps. The faster uplink speed is particularly important for customers who routinely send large files over the wireless network while mobile.
      • The LIFEBOOK P7230 is the first in the product line to migrate to the Sierra Wireless HSUPA module and is expected to begin commercial shipments in Europe this summer.
      • “Embedded UMTS enables easy data access whenever and wherever the users are. To optimize the benefits that embedded UMTS brings, speed is an integral part. The improvements to data speed and uplink provided by HSUPA technology are therefore another important step,” said Andreas Thimmel, Senior Vice President Volume Business at Fujitsu Siemens Computers. “We want the LIFEBOOK P7230 to offer the best possible mobile user experience, and collaborating with Sierra Wireless to integrate the latest in mobile broadband technology is a key part of delivering true mobility.”
  • Atmel Corporation  (2)
    • ZigBee RF4CE wireless/REB231ED-EK evaluation kits
      The ZigBee RF4CE wireless evaluation kit designed for ZigBee PRO and ZigBee RF4CE application development, and prototyping and the REB231ED-EK evaluation kit with antenna diversity support for the Atmel AT86RF231 device (+)

      Features:

      52213.jpg
      • Kits support ZigBee application profiles as well as IEEE 802.15.4 and proprietary wireless applications
      • Kits come with reference boards based on the Atmel ATmega128RFA1 and AT86RF231 wireless low-power transceivers and ZigBee-compliant software stacks ready for download at Atmel's website
      • [...]
    • AT76C902
      A second generation Voice over IP (VoIP) chip, designed for 802.11a/g wireless VoIP applications (+)

      Features:

      • The AT76C902 consists of an ARM946 processor for VoIP call control, authentication and signaling functions, and two subsystems - an ARM7and 802.11a/g Media Access Controller (MAC) that implements the 802.11a/g protocols, and a TEAK TeakDSPCore and integrated voice codec for voice processing function
      • Atmel's AT76C902 supports Wi-Fi Multimedia (WMM) and WMM Power Save modes
      • By supporting U-APSD and Scheduled APSD (S-APSD), solutions based on Atmel's AT76C902 have talk times of over six hours and stand-by times of over 220 hours on a 900 mA battery
  • ADLINK Technology, Inc.  (4)
    • MXE-202i intelligent loT gateway
      The ADLINK Intelligent IoT Gateway Starter Kit provides a complete loT connection solution for reduced development time and quick deployment for every application environment. The loT Gateway Starter Kit includes ADLINK’s MXE-202i intelligent loT gateway, based on Intel® Atom™ E3826 processors, ADLINK’s EdgePro loT device & sensor management application, one light sensor and corresponding siren output, Modbus TCP module and accessories, utilizing industrial open standard protocols with security functions powered by Intel® loT Gateway Technology. (+)

      Features:

      350207589861132636.jpg
      • Provides a complete IoT connection solution for accelerated IoT application development
      • Easy configuration with user-friendly administrator interface and dashboards
      • Built-in ADLINK SEMA & SEMA Cloud remote management solution
    • IMT-BT Industrial Tablet
      The IMT-BT is an industrial, rugged mobile tablet, integrating the dual-core Intel® Celeron® processor N2807 for high performance computing power. Built-in WLAN or optional WWAN connectivity enables the IMT-BT to easily access information from a wide variety of industrial and commercial settings. An IP65 rating and 1.5 meter drop resistance (with optional rubber housing) support significantly ruggedized construction to withstand the most demanding environments. The IMT-BT holds its own next to consumer tablets, with a 10.1" capacitive touchscreen and built-in megapixel cameras on the front and rear. The display is protected by ultra-strong Gorilla Glass, making it virtually impervious to damage, able to flex when dropped without shattering or scratching. The IMT-BT supports 802.11 a/b/g/n/ac for maximum wireless speed. The data-only modem accommodates optional high-speed 3.5G HSPA+ or 4G LTE cellular connections. In office or outside, WLAN and WWAN connectivity support speedy reception and processing, and sunlight readability allows easy viewing in the field. The table is also equipped with an NFC reader/writer and supports recognition of RFID tags (13.56 MHz). A SAM (Secure Access Module) is standard, enabling communication of encrypted data for applications requiring higher levels of security. (+)

      Features:

      349601918751702645.jpg
      • Dual-core Intel® Celeron® N2807 SoC @ 1.58GHz
      • Operating Systems: Windows Embedded 8.1 & Android 4.4.2
      • 10.1 sunlight readable display, capacitive touchscreen; GPS, E-compass, G-sensor
    • XE-1400 Fanless Embedded Computer
      Combining superior processor performance, wireless capability, and rich, scalable I/O in a compact and robust package, the ADLINK MXE-1400 is an ideal choice for a wide range of applications supporting intelligent transportation, in-vehicle multimedia, and surveillance and factory automation applications. (+)

      Features:

      322951863942178158.jpg
      • Quad-core Intel® Atomâ„¢ E3845 processors
      • Single side I/O with easy access SATA drive bay
      • Compact 210 (W) x 170 (D) x 70 (H) mm housing
    • aTCA-N700 40G Ethernet AdvancedTCA® Packet Processing Blade
      The aTCA-N700 is a single slot AdvancedTCA® (ATCA) blade powered by dual OCTEON II multi-core processors for high performance packet processing applications such as IPTV, LTE wireless, security and many more areas. The blade provides up to 40Gbps full duplex packet processing performance with flexible network interfaces. The aTCA-N700 is designed to provide high performance security enabled intelligent deep packet inspection and processing functions that are required by high-end network appliances, security appliances, switches, and servers. The major building block is the Cavium CN6880 packet processor subsystem. FEATURES: Two Cavium OCTEON II CN6880 processors, each with 32 cnMIPS64 V2 cores processors Eight memory sockets support VLP DDR3-1600 REG/ECC up to 128 GB Onboard Ethernet switch BCM 56842 provides connectivity to RTM, OCTEON II processor and backplane (Fabric) with L2 and L3 switch management software Dual 1000BASE-T Fabric Interface channels Powerful Local Management Processor - Freescale QorIQ P2041, quad-core @ 1.2GHz Flexible RTM support on 12 x10G SFP+ ports (RTM-RN710) or 2x 40G QSFP+ and 4x 10G SFP+ (RTM2-RN720) Supports ADLINK Software for Networks (ADSN) [...] (+)

      Features:

  • National Instruments  (2)
    • PXIe-8108
      High-performance embedded controller, which features an Intel Core 2 Duo T9400 processor and is designed to significantly reduce test times for PXI Express - and CompactPCI Express-based automated test systems (+)

      Features:

      42408.jpg
      • Engineers can use this 3U embedded controller in any PXI Express chassis to create a compact, high-performance PC-based platform for many test, measurement and control applications
      • With its 2.53 GHz dual-core processor, 800 MHz DDR2 memory and 1 GBps total system bandwidth, the NI PXIe-8108 is ideal for advanced RF and wireless test applications, high-throughput data acquisition systems and other applications that require intensive analysis, signal or image processing
      • NI PXIe-8108 optimizes RF and wireless test applications because measurement speed is related to the computational performance of the test system's controller
    • NI Measuremnt Suite
      Software suite that engineers can use with modular RF instrumentation for automated testing of Mobile WiMAX devices (+)

      Features:

      • Based on PXI Express instrumentation powered by multicore technology
      • Performs error vector magnitude (EVM), power and spectral measurements three to five times faster than traditional instruments
      • Typical residual EVM accuracy of -46 dB at 3.5 GHz (-10 dBm)
  • GreenPeak Technologies  (2)
    • Lime CM-08
      A tiny 5 cm2 (< 1 square inch) device that functions as a stand-alone communications system with transceiver, antenna, and low-power mesh network software onboard (+)

      Features:

      • Wireless transceiver and sensor interface allow users to connect appropriate sensors such as photocells, vibration detectors, infrared, or other devices
      • Onboard software adapts the available power to the device's consumption
      • Built-in mesh technology enables designers to create extended wireless IEEE 802.15.4 open standard [...]
    • EMERALD GP500C
      The Emerald GP500C is a communications controller chip for ultra low power wireless sensor networks (+)

      Features:

      37646.jpg
      • Has extreme low power features that enable energy harvesting solutions for wireless sensor networks
      • Incorporates a transceiver with a fully integrated communications layer and an on-chip energy manager
      • Is an “autonomous transceiver” able to drive and control the data communication instead of being driven by a microcontroller [...]
  • Redpine Signals  (2)
    • RS9116 Connectivity Product Family
      Redpine Signals RS9116 family of SoCs and modules provides a comprehensive multi-protocol wireless connectivity solution including 802.11 a/b/g/n (2.4 GHz and 5 GHz), 802.11j, dual-mode Bluetooth® 5 and 802.15.4 (capable of running Thread or ZigBee®). Solution Highlights: (+)

      Features:

      4136331213967296643.jpg
      • Co-existence of multiple wireless protocols managed by an internal protocol arbitration manager
      • Ultra-low power consumption with multiple power modes to reduce the system energy consumption
      • Multiple levels of security including FIPS 140-2 and PUF (Physically Unclonable Function) to create a highly secure system
    • Ultra-Low Power RS14100 Wireless MCU
      Redpine Signals RS14100 WiSeMCU family of SoCs and modules are the industry’s first Wireless Secure MCU family with a comprehensive multi-protocol wireless sub-system. The RS14100 has an integrated ARM Cortex-M4F ultra-low-power microcontroller, a built-in wireless subsystem, advanced security, high performance mixed-signal peripherals, and integrated power-management. Highlights include industry’s lowest Wi-Fi standby associated power, smallest integrated module, and highest level of throughput in a secure device. [...] (+)

      Features:

      4012233099124190052.jpg
  • Digi International  (1)
    • ConnectCore Wi-MX51
      Core module designed specifically for low-power, wireless multimedia applications (+)

      Features:

      43807.jpg
      • First wireless enabled core module based on Freescale's new high-performance i.MX51 processor
      • First to offer 802.11 a/b/g/n Wi-Fi and first to support Microsoft's new Windows CE 6.0 R3
      • The ConnectCore Wi-MX51 enables wired and Wi-Fi networking for low power embedded applications with demanding performance requirements such as displays within medical devices, digital signage, security/access control devices, point-of-sale equipment and industrial automation technology
  • WinSystems, Inc.  (10)
    • PCM-ZIGBEE
      WinSystems' PCM-ZigBee is a PC/104-compatible board configured with a ZigBee wireless transceiver plus an optional Trimble GPS receiver (+)

      Features:

      35122.jpg
      • Addresses the unique need of most remote monitoring and control and sensor network applications
      • IEEE 802.15.4 ZigBee wireless interface
      • PC/104-compatible with XBee Pro transceiver
    • Embed Connectivity
      The LBC-GX500 achieves significant advancement in the application of wired and wireless connectivity technology applied to single board computers (+)

      Features:

      33634.jpg
      • Connectivity options include 802.11 wireless Ethernet, GSM/GPRS/CDMA cellular modem, ZigBee wireless RF module, 10/100 wired Ethernet, global-compliant dial-up (POTS) modem, six USB ports, and six COM channels
      • Provides an open and powerful industrial platform for management of geographically distributed machinery and sensors with a operational temperature of -40 °C to +85 °C
      • Full-featured SBC with a variety of on-board peripherals which eliminate the need for other I/O card
    • PXM-MiniPCIe
      SUMIT-ISM board format defined by the SFF-SIG (+)

      Features:

      45042.jpg
      • Features a PCI Express (PCIe) MiniCard socket, which supports PCIe x1 and USB 2.0, as well as connections to an SMBus, LEDs for wireless network visual status, a SIM card for GSM and WCDMA application data storage, and a +1.5 and +3.3 V power source for the MiniCard
      • Can support different applications in the same socket
      • The removable MiniCard enables the addition of wireless functions such as WLAN, 802.11 a/g, cellular data, and Bluetooth
    • 802.11 Module
      IEEE 802.11b/g Wi-Fi wireless LAN support (+)

      Features:

      • Up to 54 Mbps at 2.4 GHz
      • Industry standard wireless LAN security
      • Supports single or dual antennas
    • PPM-Wireless
      IEEE 802.11b/g standard, dual-mode, Wi-Fi-certified wireless LAN support (+)

      Features:

      20939.jpg
      • Up to 54 Mbps at 2.4 GHz
      • Industry-standard wireless LAN security support and upgradeable support for AES software implementation
      • Support for optional antenna for optimized WLAN performance for multi-antenna systems
    • Mini
      SUMIT-ISM module supports MiniPCIe cards for a variety of Wireless Technologies (+)

      Features:

      45062.jpg
      • Adds wireless LAN, WPAN, or WWAN communications to SUMIT-based systems
      • SUMIT-ISM module with MiniPCIe and USB support
      • MiniPCIe Connector includes: support for both Full and Half size PCIe MiniCards
    • PCM-GPS
      A dual-function PC/104 module featuring a GPS receiver and cellular modem (+)

      Features:

      25323.jpg
      • Ideal for fixed and mobile embedded applications that require navigation, tracking, data logging, timing, and/or communications functions
      • GPS features: Lassen GPS receiver module provides position, velocity, and time data; TSIP, TAIP, and NEMA 0183 protocols; very low power requirement; supports pulse output for accurate time standard; external powered antenna connection via a standard SMA connector
      • Cellular wireless features: supports both GSM/GPRS and CDMA; socket support for Multitech wireless module; recognizes standard AT commands; alarm management, phone book management, and Short Message Services (SMS); Bluetooth support available soon
    • PCM-GPS
      A dual function PC/104-compatible module that supports both a GPS receiver and a socket cellular modem (+)

      Features:

      • GPS receiver provides position, velocity, and time data
      • Supports TSIP, TAIP, and NEMA 0183 protocols
      • Cellular wireless supports both GSM/GPRS and CDMA
    • GPS Receiver Module
      A dual function PC/104-compatible module that supports both a GPS receiver and a socket cellular modem (+)

      Features:

      • GPS receiver provides position, velocity, and time data
      • Supports TSIP, TAIP, and NEMA 0183 protocols
      • Cellular wireless supports both GSM/GPRS and CDMA
    • PCM-518
      Intelligent sensor interface module for acquiring high-precision sensor data for PC/104-based systems (+)

      Features:

      1136.jpg
      • Optimized for temperature and low-level signal measurements, including signal filtering, sensor excitation, and linearization on all channels
      • Supports thermocouples, RTDs, strain gauges, thermistors, and low-level voltage inputs [...]
  • Luxoft  (1)
    • BitCatcher ZigBee Network Analyzer
      Free-to-download BitCatcher is a simple and powerful tool for analyzing wireless transmissions over IEEE 802.15.4/ZigBee-based networks covering both US and European ISM bands. BitCatcher parses and displays packet information based on a customizable protocol description. Developers can modify the descriptions to extend existing protocols or to create new ones. BitCatcher comes with the preloaded wireless protocol descriptions for IEEE 802.15.4 MAC, ZigBee PRO, ZigBee Smart Energy, and ZigBee Light Link. Drivers and firmware for Atmel hardware platform are also included. (+)

      Features:

      228303566312419251.jpg
      • Windows and Linux support
      • Support of various 802.15.4 frequency bands: 2.4 GHz, 868 MHz and 915 MHz
      • Native ZigBee and Light Link specific security schemes support
  • Microchip Technology, Inc.  (3)
    • PICDEM Z Demo Kit
      An ZigBee Technology wireless communication protocol development and demonstration platform (+)

      Features:

      • ZigBee software stack supporting RFD (Reduced Function Device), FFD (Full Function Device) and coordinator
      • Daughtercard with Microchip MRF24J40 IEEE-802.15.4 2.4 GHz transceiver
      • Microchip sniffer board with USB interface
    • MCP2030 AFE
      The MCP2030 is a stand-alone, analog front end (AFE) for smart, low frequency (125 kHz typical) wireless authentication applications such as passive-keyless-entry, tire pressure measurement systems (TPMS) and data acquisition. (+)

      Features:

      • Three input pins for three axis reception
      • Adjustable high input detection sensitivity (3 mVpp typical)
      • Programmable antenna tuning capacitance (63 pF, 1 pF/step)
    • ZG2100 Wi-Fi PICtail
      Microchip Technology and ZeroG Wireless have teamed up to enable Wi-Fi for a range of MCUs and DSCs in a small, low-power footprint (+)

      Features:

      • On an easy-to-use daughterboard (or PICtail in Microchip lingo, for their standard development kits), the ZeroG ZG2100M module controls MAC and baseband layers and connects to the Microchip host MCU or DSC using an SPI port
      • The host runs both a free TCP/IP stack and the system application
      • The small-footprint ZG2100M integrates the antenna, power amp, RF, and baseband circuitry into a fully FCC, IC, and ETSI certified module, saving both component costs and development time [...]
  • Atific Oy Ltd.  (1)
    • Multi-radio WSN kit
      High performance FPGA based multi-radio wireless sensor network development kit (+)

      Features:

      • Extremely flexible and fully re-configurable development kit for developing new types of communication protocols, algorihms and computation architectures for mesh networking
      • Four parallel 1 Mbps radios with up to 83 selectable frequency channels allow simultaneous data exchanges with several neighbors
      • Up to four Altera NIOS softcore processors and custom HW accelerators synthesizable on FPGA enable powerful parallel computing and radio access
  • Quanmax  (1)
    • UbiQ-100 Series
      UbiQ-100 Series is a fanless IoT gateway integrating Intel® BayTrail Atom™ E3815/E3825 / Celeron® N2930 SoC Processor into a small footprint. Combining two GbE LAN ports and two mPCIe slots for wireless expansion, it enables flexible connections between edge devices and data center through the wired or wireless networks. (+)

      Features:

      341878748132648226.jpg
      • Intel® BayTrail SoC Processor, Atomâ„¢ E3815/E3825 / Celeron® N2930
      • 2GB/4GB DDR3L 1600 memory onboard
      • 16GB/32GB eMMC onboard, 1x Micro SD Card Cage for storgae
  • Luxul Wireless  (1)
    • Pro-WAV 100/200
      Pro-WAV 100 and 200 series Wi-Fi signal range extenders help customers save money and time during installation and maintenance (+)

      Features:

      • A single Pro-WAV 100 covers an area of 10,000 square feet (3,050 square meters) or more while penetrating most typical office construction and providing increased performance and quality over other wireless systems
      • A single Pro-WAV 200 can efficiently cover an area of 50,000 square feet (15,250 square meters) or more while penetrating office construction and providing increased performance and quality over other wireless systems
      • Both Pro-WAV systems are compatible with any 802.11 b/g Wireless Access Point (WAP) [...]
  • Synapse Wireless Inc.  (3)
    • Synapse's SNAP
      Synapse's SNAP® technology is an award-winning IEEE 802.15.4, auto-forming, multi-hop, mesh network stack combined with an embedded Python interpreter for running application code (+)

      Features:

      42743.jpg
      • Self-healing mesh network
      • Instant-ON: communicate within milliseconds of power-up
      • All devices are peers - every node can bridge, route, and sleep
    • Synapse's SNAPconnect
      Synapse's SNAPconnect provides a seamless interface between devices on a wireless SNAP network and client applications either hosted either locally or across the Internet (+)

      Features:

      42749.jpg
      • Connect to any SNAP network anywhere in the world from anywhere in the world
      • Nothing to add to SNAP
      • Designed from the ground up to work with TCP/IP
    • Synapse Portal
      Synapse's Portal is a wireless application development environment for building SNAP mesh networks, and provides complete access to all functions in every node on the SNAP network (+)

      Features:

      42744.jpg
      • Comprehensive administration tool for SNAP networks
      • Participates as a full-fledged peer on the network
      • Runs on Windows (2000, XP, Vista) or Linux
  • congatec inc  (3)
    • IoT Gateway Platform
      congatec introduces a flexible IoT gateway platform that is application ready and easily customizable for rapid field deployment. The IoT gateway offers extreme levels of flexibility in terms of processing performance and software integration, is able to host up to 8 wireless antennas that can be connected to 3 mini PCI Express slots and 6 internal USB based slots for wireless and wired connectivity modules. Customized system designs are also possible upon request. (+)

      Features:

      350368048861902469.jpg
      • Scalable computing performance utilizing Qseven modules, which range from the NXP single-core i.MX6 processor up to a quad core Intel® Pentium® CPU
      • Mount up to 8 antennas supporting multiple wireless standards in parallel, while enhancing signal quality by utilizing antenna diversity
      • 6 internal USB ports and 3 mini PCIe slots are available and able to support LTE 3GPP modems, 2x WI-FI, 2x LAN with PoE and PROFINET features, low power BlueTooth (BTLE) and 6LoWPAN
    • conga-SKIT SMARC 2.0 Starter Kit
      Introducing the SMARC 2.0 Quick Starter Kit for Intel® Atom™ processors. The kit comes with congatec’s first SMARC 2.0 module – the conga-SA5 – and everything developers need for the immediate evaluation of the new SMARC 2.0 standard and the latest Intel® Atom™ processor generation. Application engineers of connected Industry 4.0 and wireless IoT devices will love the option of the integrated wireless interfaces with standardized antenna connectors on board. [...] (+)

      Features:

      3823408478615879445.jpg
    • conga-SA5 SMARC 2.0
      SMARC 2.0 is the most current small form factor standard to address future market requirements based on the latest generation Intel processors, and is compatible with ARM and x86 architectures. It offers embedded system developers an off-the-shelf, credit-card sized embedded computing core for IoT-connected multimedia platforms and graphics-intensive low-power applications. The conga-SA5 stands out with rich choice of graphics, camera, sound, network and optional wireless interfaces. (+)

      Features:

      3689447648616219292.jpg
      • 314-pin pinout
      • Support up to four independent displays
      • Two Gigabit Ethernet ports for Industry 4.0 apps
  • EnOcean  (1)
    • STM100
      Energy harvesting (+)

      Features:

      21477.jpg
      • Self powered
      • Battery-less
      • Maintenance free
  • SCL Elements  (1)
    • CAN2GO
      Second generation CAN2GO Universal and VAV controllers (+)

      Features:

      52792.jpg
      • GW2 gateway
      • 400 MHz processors
      • 64MB of RAM
  • Grid Connect  (2)
    • ConnectSense
      ConnectSense is a platform of low-cost, cloud-based Wi-Fi 802.11b/g wireless sensors that monitor changes in the user’s environment and then sends notifications via phone call, email, text or Tweet. Sensors are available to monitor temperature, humidity, water, motion, security and light. (+)

      Features:

      268419209871919406.jpg
      • Wireless sensor
      • Works using Wi-Fi, no recurring monthly charges
      • DIY installation
    • Ethernet/IP Modbus
      Xport and Matchport components are now available with Modbus or Ethernet/IP (+)

      Features:

      33787.jpg
      • These simple components can be added to existing boards and all standard Modbus commands and messages are automatically converted
      • The Xport-MBTCP converts your existing Modbus RTU/ASCII serial TTL port to a Modbus TCP Ethernet port while the Xport-EIP component converts an existing Modbus RTU/ASCII serial TTL port to an Ethernet/IP port Using Ethernet, every node has the ability to read/write data to each other thus eliminating the limitations of a serial network. Ethernet/IP or Modbus capabilities are also available with the MatchPort Wireless 802.11b/g Device Server component: Matchport-MBTCP or Matchport-EIP. [...]
  • Daintree Networks  (2)
    • Sensor Net Analyzer
      The Sensor Network Analyzer is the industry's most comprehensive solution for ZigBee/802.15.4 testing, analysis, and commissioning (+)

      Features:

      • Standards-based with unique network visualization
      • Industry-standard tool used by key semiconductor and software companies, and at all product certification and interoperability test events hosted by the ZigBee Alliance [...]
    • Sensor Network Analyzer (SNA)
      Sensor Network Analyzer (SNA) (+)

      Features:

      34425.jpg
      • Comprehensive solution for ZigBee and IEEE 802.15.4 testing, analysis, commissioning, and management
      • Extends traditional protocol analysis with powerful visual network analysis including visualization of network topologies, routing and application bindings, link quality, and device states
      • Multi-node capture for analysis of large and physically distributed networks, over-the-air configuration, and upgrades for commissioning and maintenance, and measurements for analysis of system performance
  • Intrinsyc Software  (1)
    • i-RIL and i-MUX
      The i-RIL (Intrinsyc Radio Interface Layer) and i-MUX (Intrinsyc Multiplexer) are off-the-shelf software components for wireless handheld development (+)

      Features:

      • Can be used with wireless handhelds based on Windows Mobile 2003 software for Pocket PCs and Smartphones
      • i-RIL provides the underlying technology for enabling wireless voice or data applications using Windows Mobile software to communicate with a GSM/GPRS or CDMA2000 modem
      • It is a customized layer of software code that operates with Microsoft's Cellcore telephony stack
  • LS Research  (3)
    • TiWiConnect Platform for IoT Design
      The TiWiConnect Internet of Things (IoT) Platform from LSR simplifies and accelerates the process of adding wireless/cloud connectivity and smartphone-controlled capabilities to IoT products. TiWiConnect is an end-to-end solution that provides all three of the critical components that companies need for their IoT design projects. (+)

      Features:

      313267113981116822.jpg
      • First end-to-end solution that provides all three of the critical components that companies need for their IoT design projects.
      • Provides the embedded wireless module and related software, which together add Wi-Fi capabilities to a product.
      • Provides the cloud server software and hosting services necessary to access and manage the product from anywhere.
    • SaBLE-x Bluetooth® Smart module
      LSR’s new Serial-to-BLE software solution simplifies the process of adding Bluetooth wireless capabilities to products that engineers are working on. It gives engineers a much faster and less frustrating way of building wireless capabilities into a product, and it comes from LSR, which has been a trusted name in wireless design for almost four decades. [...] (+)

      Features:

      319543223211105542.jpg
    • SaBLE-x Bluetooth Smart module
      SaBLE-x™ Bluetooth® Smart module is the first certified module solution based on the new TI SimpleLink™ Bluetooth Smart CC2640 wireless MCU. The SaBLE-x module offers superior RF performance for BLE applications, providing over twice the signal range of previous generation BLE technology, and can operate at nearly 1/3 the average power for a 1 second connection interval when compared to previous BLE modules. In addition, developers will be able to access an unmatched suite of intuitive software tools that remove complexity and accelerate development times. (+)

      Features:

      300773392285678845.jpg
      • Latest silicon technology delivers 8 dBm link margin improvement vs. current Bluetooth low energy modules
      • Features ARM Cortex-M3 processor for host applications and an ARM Cortex-M0 dedicated for the RF core
      • Dedicated Sensor Processor for even lower power operation
  • Adaptive Network Solutions GmbH  (1)
    • @ANY900-2
      783/868/915 MHz IEEE802.15.4/ZigBee RF module with U.FL antenna connector (+)

      Features:

      44497.jpg
      • For wireless sensing and control applications in smart metering, industrial automation and more
      • U.FL antenna connector enables rapid design-in, using a different external antenna for every application
      • ISM bands: 915 MHz in the US, 868 MHz in Europe and 783 MHz in China
  • Monnit Corporation  (1)
    • Monnit Mine
      Monnit Mineâ„¢ is an open software platform that provides the ability to integrate Monnit wireless sensors and gateways with your own software system. Monnit wireless gateways can be unlocked, allowing them to be directed to a custom host or IP address, where an installation of Monnit Mine works as a translation application between Monnit wireless sensors networks and existing or custom software applications. (+)

      Features:

      312281144757128377.jpg
      • Has API in standard programming languages for easy integration (currently .Net / Java – other languages coming soon.)
      • Can be setup and receiving data in just a few minutes
      • Implements broad range of sensors and gateways into existing monitoring solution instead of having to implement one sensor at a time
  • NEXCOM International Co LTD  (1)
    • Mobile Tablet PC
      Intel Atom Processor N450 based 8" Fan-less Tablet PC Supports / Touch Screen/ Laser Barcode Scanner/ RFID / 3.5G wireless/ GPRS/ Wi-Fi/ Bluetooth/ Digital Camera (+)

      Features:

      45721.jpg
      • Hot Swappable Battery
      • 8" LCD (VGA with LED backlight) with 5-wires resistive touch screen
      • Daylight Readable Display
  • Laird Technologies  (4)
    • Laird's Dual-Band Wi-Fi+Bluetooth Module
      Laird has released its new 50 Series Enterprise Wi-Fi® + Bluetooth© modules, the next-generation of its popular dual-band embedded wireless modules that provide product engineers with a pre-certified solution that is optimized to ensure reliable, robust, secure connectivity in difficult RF environments. The 50 Series family of modules is designed to thrive in challenging settings with obstacles such as dense wireless signal traffic and complex physical geography, including hospitals, industrial sites, public areas and more. (+)

      Features:

      342255186231284384.jpg
      • Building on the well-regarded 40 and 45 series from Laird, the new 50 Series modules feature dual-band Wi-Fi® with 2x2 MIMO (Multiple-Input, Multiple-Output) capabilities, as well as both Classic Bluetooth and Bluetooth Smart capabilities.
      • The dual antennas improve reliability and further ensure that wireless connectivity is maintained so critical data can be shared at all times.
      • The 50 Series modules boast comprehensive, best-in-industry software with even faster scanning and roaming capability than prior generation solutions.
    • 50 Series Enterprise Wi-Fi® + Bluetooth©
      Laird announced the release of its new 50 Series Enterprise Wi-Fi® + Bluetooth© modules, next-generation of its popular dual-band embedded wireless modules that provide product engineers with a pre-certified solution that is optimized to ensure reliable, robust, secure connectivity in difficult RF environments. The 50 Series family of modules is designed to thrive in challenging settings with obstacles such as dense wireless signal traffic and complex physical geography, including hospitals, industrial sites, public areas and more. [...] (+)

      Features:

      337423410211954863.jpg
    • CL400
      The easy-to-use CL400 Wireless Ethernet Bridge provides outstanding data throughput and security for wireless applications in the M2M and industrial market segments with no configuration necessary. Users can simply plug in their Ethernet cable to apply power and have a wireless bridge at a distance up to one mile and speeds up to 11 Mbps, thereby extending the range of networks beyond the reach of traditional 802.11 access points. (+)

      Features:

      • Two CL400 units
      • Standard RJ-45 Ethernet jack
      • Two 2.4 MHz omnidirectional antennas with 5 dBi gain
    • First LoRa+BLE wireless module for IoT
      Laird has introduced a new line of wireless modules that integrate long-range LoRa technology and short-range BLE technology for the first time in a commercial solution, giving companies the ability to create longer-range EIoT systems than previously possible with a single module. The RM1xx product family enables companies to dramatically expand the locations where IoT can be deployed by using the combination of long-range LoRa wireless technology and ultra low-power BLE technology integrated in the same module. http://www.lairdtech.com/products/rm1xx-lora-modules. (+)

      Features:

      342254675231494739.jpg
      • can transmit and receive data wirelessly between IoT deployments and gateways up to 10 miles apart (or longer with relays)
      • Integrating BLE with LoRa enables companies to deploy IoT networks that can go nearly anywhere, utilizing BLE for short-range, low-power connectivity between wireless devices while taking advantage of LoRa for communications over distance
      • In an industrial setting, for example, the RM1xx can monitor sensors on water, fuel, and chemical tanks throughout a facility via wireless low-power BLE technology or any traditional I/O connections
  • Avnet  (3)
    • Freedom Platform for Kinetis KW2x MCUs
      The FRDM-KW24D512 is a development platform based on the MKW24D512 Kinetis® W Series microcontroller and is enabled by software support for Thread, ZigBee Pro, 802.15.4 MAC, SMAC and Kinetis Software Development Kit (SDK). The FRDM-KW24D512 kit contains two boards, enabling point-to-point out of the box connectivity. (+)

      Features:

      350373575861342762.jpg
      • Supports MKW24D512 Kinetis® microcontroller (up to 50 MHz Cortex-M4 MCU, 512 KB Flash)
      • Full IEEE 802.15.4 compliant wireless node
      • Software support: Thread, ZigBee Pro, 802.15.4 MAC and SMAC, Kinetis Software Development Kit (SDK)
    • Multi-standard CC2650 SensorTag Kit
      The new SimpleLinkâ„¢ multi-standard SensorTag kit invites you to realize your Internet of Things (IoT) product idea. Including 10 low-power MEMS sensors in a tiny package, the kit is expandable with DevPacks to make it easy to add your own sensors or actuators. (+)

      Features:

      350373967861650243.jpg
      • Support for 10 low-power sensors, including ambient light, digital microphone, magnetic sensor, humidity, pressure, accelerometer, gyroscope, magnetometer, object temperature and ambient temperature
      • Ultra-low power, with years of battery life from a single coin cell battery and enabling battery-less applications through the ARM® Cortex®-M3 based ultra-low power SimpleLink CC2650 wireless MCU.
      • Cloud connectivity lets you access and control your SensorTag kit from anywhere
    • Intel Quark MCU Developer Kit
      The Intel® Quark™ Microcontroller Developer Kit D2000 consists of a small form-factor board which contains among other things flash storage, a 6-axis compass/accelerometer with temperature sensor, an Arduino-Uno compatible shield’s interface and a booster-pack compatible shield’s interface. A USB connection enables programming and debugging (JTAG) of the development platform. (+)

      Features:

      350373029861345994.jpg
      • Extends excellent security to the device with software- and hardware-based features to help protect your data.
      • The kit works with other Intel-based systems and simplifies integration of edge products into end-to-end Internet of Things (IoT) architectures.
      • Simplifies design and reduces bill of materials (BOM) by minimizing external components required on the platform.
  • Phoenix Contact  (6)
    • RAD-80211-XD-BUS
      Wireless Ethernet Radio with modular I/O and firmware capabilities (+)

      Features:

      • Combines truly secure wireless communication with control of up to eight I/O modules
      • Up to 64 digital, analog, and pulse I/O can be interfaced directly to the radio
      • This flexibility saves installed cost for distributed Ethernet wireless I/O monitoring and control applications
    • RAD-ISM-900-EN-BUS
      A busable 900 MHz radio is the newest addition to Phoenix Contact's Trusted Wireless Ethernet (TWE) portfolio of industrial wireless products (+)

      Features:

      • The RAD-ISM-900-EN-BUS allows direct connection of I/O modules to the radio
      • The radio allows the user to collect I/O without a remotely located PLC or I/O data concentrator
      • The bused I/O is made accessible to the network using the readily available MODBUS protocol
    • FL WLAN 5101
      The FL WLAN 5101 offers high-speed wireless networking up to 300 Megabits per second (Mbps), meeting the needs of the most bandwidth-demanding applications such as IP-based video surveillance, plant networking and mobile operator access for programming and maintenance. (+)

      Features:

      225475709981449187.jpg
      • Offers high-speed wireless networking up to 300 Megabits per second (Mbps)
      • Meets the needs of the most bandwidth-demanding applications such as IP-based video surveillance, plant networking and mobile operator access for programming and maintenance.
      • The new CM (Cluster Management) technology simplifies wireless network management. All access points in a WLAN network can be easily configured and managed via a single web interface using any access point within the network, without additional costs for expensive hardware or software.
    • RAD-WHG/WLAN-XD
      Phoenix Contact's new WirelessHART gateway features an integrated 802.11b/g WLAN transceiver (+)

      Features:

      46083.jpg
      • The rail-mount gateway can increase the reliability and flexibility of a HART system
      • The 45 mm-wide RAD-WHG/WLAN-XD connects up to 250 WirelessHART field devices, converting HART data to Modbus TCP or HART UDP for easy integration into almost any host system
      • The integrated WLAN can serve as the backhaul connection, allowing the gateway to be installed in the field closer to the monitored devices
    • -SYS-NEMA4X-900
      Radio-ready enclosure simplifies the installation of industrial wireless radio modems and small RTU devices (+)

      Features:

      • Provides robust, secure solution for remote data collection while saving installation time and preventing wiring errors
      • Pre-wired power rail has space for either a Trusted Wireless or GSM/GPRS radio modem and other components
      • 24 VDC power with backup prevents failure of critical operations due to power dips and brownouts, while the surge arrestor protects against lightning and surges
    • EtherNet/IPMadeEasy
      Phoenix Contact introduces EtherNet/IP Made Easy, a freeware tool that makes configuring Phoenix Contact managed switches and I/O for any EtherNet/IP application easy and quick (+)

      Features:

      • With simple, wizard-style execution, EtherNet/IP Made Easy takes the user through all of the key steps of EtherNet/IP network device configuration
      • No software installation or SNMP services are required
      • EtherNet/IP Made Easy supports multiple wired or wireless adaptors and provides network discovery and IP management functions for both managed switches and I/O. Key switch management features include the ability to monitor, set and save multicast IGMP and redundancy settings for groups of managed switches in just a few clicks
  • Texas Instruments  (1)
    • CC2530
      Complete 2.4-GHz radio frequency (RF) system-on-chip solution (+)

      Features:

      • Supports the IEEE 802.15.4 standard and an extensive set of applications, including ZigBee PRO networks, ZigBee RF4CE remote controls, smart energy, home and building automation, environmental monitoring and wireless medical
      • Provides up to 256 KB of Flash memory to enable development of multiple network protocols, which TI supports with free, downloadable software and tools to ensure that customers have everything needed for complete system development
      • TI offers a variety of free protocol software stacks that are supported by the CC2530 to enable cost-optimized selection of network protocol based on system requirements
  • Dust Networks  (2)
    • SmartMesh IA-510
      Wireless sensor networking system delivers embedded WirelessHART solutions to industrial automation vendors that are easy to integrate and simple to deploy (+)

      Features:

      • WirelessHART compliance: Interoperability with other WirelessHART field devices and gateways
      • Superior reliability:
      • >99.99 percent reliability, even in the most challenging industrial environments
    • SmartMesh XD
      Provides OEMs with highly reliable, ultra low-power and easy to integrate wireless sensor networking solutions (+)

      Features:

      • Ultra low-power RF technology
      • Innovative radio design consumes 80 percent less power than comparable radios
      • Delivers additional 5X increase in battery life
  • HABEY USA  (2)
    • MIT-1800
      Compact Intel Atom based fanless embedded PC with four mini-PCIe slots, dual SIM and 3G wireless support (+)

      Features:

      • The WIT-1800 is developed around Intel's power-efficient Atom N450 and D410 processors plus ICH8M chipset
      • This unique four built-in mini-PCIe design enables the system to support two 3G mini-PCIe modules for dual 3G wireless communication as well as WiFi, SSD and other mini-PCIe devices
      • Standard interfaces include: one VGA port supports up to 2048x1536
    • MITX-6852
      Includes six SATA II ports, PCI Express, built-in Intel Matrix Storage Technology and Intel Core 2 Duo processor support (+)

      Features:

      39312.jpg
      • Perfect for NAS,NVR, thin Server applications
      • Support Intel Core 2 Duo, Core Duo and Celeron M processors
      • Built-in 6 individual SATA II channels, support 2 eSATA ports
03/24/23 04:01
Close

Subscribe to Embedded Wireless updates