Embedded Wireless

Showing results for: wireless sensors
Refine Embedded Wireless companies and products:
embedded wireless m2m onstar lte wimax white-space near-field communications nfc wireless 802.11 wi-fi zigbee 802.15 802.15 4 module 802.15.4 airbee airbee wireless cc2420 cc2430 chipcon cc2420 compxs em2420 home automation homerf ieee 802.15 ieee 802.15 4 ieee802.15.4 long range wireless mc13191 mc13192 mesh networking module radio rf modems rf module rf modules rf receiver rf transceivers rf transmitter wireless remote control wireless sensors wpan wpans zdo zig bee zigbee-ready zigby zmd wireless sensor networks wireless sensor network
Click on any vendor
to see a listing of
wireless sensors related products.
  • SMC Networks  (14)
    • SMC2870W
      A 2.4-GHz, 54 Mbits/sec, wireless, multi-mode, 802.11g adapter (+)

      Features:

      • Installs and communicates without drivers
      • Configurable as: a wireless access point, to provide network access to other wireless 802.11g and 802.11b devices; as a repeater, through its support for Wireless Distribution System (WDS), to extend the range of a wireless 2.4-GHz network using either a point-to-point or point-to-multipoint configuration; or as a wireless adapter, to connect virtually any Ethernet-capable device into a wireless network
      • Fully compliant with IEEE standards
    • SMC2586W-G
      A 2.4-GHz, 802.11g wireless bridge (+)

      Features:

      • Bridges two or more wired LANs
      • Configurable as an access point/bridge, bridge master, or bridge slave
      • Security features include 64-bit or 128-bit key WEP wireless data encryption, 802.1x, Wi-Fi protected access (WPA), disabled SSID broadcast, wireless client isolation, and MAC address filtering
    • SMC2671W
      A 2.4-GHz, 11-Mbit/sec, wireless Ethernet adapter (+)

      Features:

      • Platform independent network adapter
      • Plug-and-play installation; no drivers required
      • 802.11b compliant
    • SMC2862W-G
      A 2.4-GHz, 54-Mbps, USB 2.0 WLAN adapter that provides wireless conectivity for Windows-based devices (+)

      Features:

      • Compatible with USB 1.0, 1.1, and 2.0
      • Connects to IEEE 802.11g or 802.11b wireless networks
      • Includes the EZ Installation Wizard
    • EliteConnect Wireless
      An 802.11a/g universal wireless access point and CardBus adapter (+)

      Features:

      • Provides secure, high-performance wireless access for more than 128 simultaneous users
      • Managed via a Web interface or EliteView management software for SNMP-based management
      • Authentication and security features include WPA, 802.1x authentication, support for FUNK Odyssey and Microsoft RADIUS server, and RADIUS MAC address authentication [...]
    • SMC2670W
      A 2.4 GHz frequency band, wireless Ethernet adapter (+)

      Features:

      • Converts any Ethernet-equipped device into a wireless network device
      • Plug-and-play; no drivers required
      • Compliant with IEEE 802.11b
    • SMC2621W-x
      A line of 11 Mbits/sec wireless print servers for parallel (SMC2621W-P) or USB (SMC2621W-U) printing devices (+)

      Features:

      • Built-in Ethernet port and an 11 Mbits/sec, 802.11b wireless client onboard
      • Supports both ad-hoc mode and infrastructure mode
      • Includes EZ Installation and Setup wizard
    • SMC2536W-AG
      a universal, high-power wireless CardBus adapter for enterprise networking (+)

      Features:

      • Conforms to the 802.11a, 802.11b, and 802.11g standards
      • EZ Installation Wizard
      • Supports multiple profiles
    • SMC2455W
      A 2.4 GHz frequency band, autosensing, wireless LAN access point (+)

      Features:

      • Compliant with IEEE 802.11b
      • Data rates up to 22 Mbits/sec
      • Up to 1,155' operating range
    • SMC2835W
      A 2.4 GHz frequency band, wireless LAN, Cardbus adapter (+)

      Features:

      • IEEE 802.11g draft and 802.11b-compliant
      • Data rates of up to 54 Mbits/sec
      • Up to 1,115' operating range
    • SMC2802W
      A 2.4 GHz frequency band, wireless LAN, PCI adapter card (+)

      Features:

      • IEEE 802.11g draft and 802.11b-compliant
      • Data rates of up to 54 Mbits/sec
      • Up to 1,115' operating range
    • SMC2482W
      A 2.4 GHz, autosensing, wireless LAN bridge (+)

      Features:

      • Compliant with IEEE 802.11b
      • Data rates up to 22 Mbits/sec
      • Up to 20 miles operating range with use of optional SMC high-gain antennas
    • EZ-Stream Receiver
      A high-end, networked entertainment receiver that streams, plays, and shares audio (including Internet radio), pictures, and video (+)

      Features:

      • Connects to a wired or wireless network for access to Internet resources
      • Links to entertainment devices, inluding televisions and stereo receivers, via standard A/V connectors
      • Uses 802.11a/g technology for universal compatibility, speed, and bandwidth
    • SMC2632W
      A 2.4 GHz frequency band, wireless LAN PC card (+)

      Features:

      • Compliant with IEEE 802.11b
      • Data rates up to 11 Mbits/sec
      • Operating range up to 1,155'
  • Beck IPC GmbH  (2)
    • WLAN Solution
      Fast and Affordable Implementation of Wireless LAN Solutions with the IPC@CHIP® from Beck (+)

      Features:

      • Pohlheim, November 7, 2006 – Ethernet has largely become well-established in the industrial environment. However, there are still many applications that cannot be implemented with Ethernet, such as mobile systems or spatially separated stations in large machine halls or in the open field.
      • In these cases Wireless LAN technology (or WLAN for short) is ideal as a replacement for Ethernet since the TCP/IP protocol used enables the transparent transition from Ethernet to Wireless LAN Ethernet without having to convert the protocols. The latest encryption and authentication protocols offer at the same time satisfactory protection against unauthorised access. Depending on the environment, Wireless LAN can be used to cover distances between 50 and 300 metres and even more by using special antennas.
      • Beck's new WL01 Wireless LAN module provides the IPC@CHIP® Controller SC123 / SC143 with a fully-fledged Wireless LAN interface and enables both Infrastructure-Mode on an existing access point as well as Adhoc-Mode between several WL01 modules. The Beck IPC module is available from November 2006.
    • IPC@CHIP WLAN
      Cost-efficient Wireless LAN solution for the Beck IPC@CHIP® (+)

      Features:

      • From November 2006 Beck IPC will be offering an industrial wireless LAN extension called WL01 for the IPC@CHIP® Controllers SC123 / SC143. This extension makes it possible to also connect to mobile and distributed automation devices easily via TCP/IP without the need for any proprietary wireless solutions.
      • The connection of the separate and space-saving 23 x 36 x 5 mm add-on module to the IPC@CHIP® is implemented serially via an SPI interface with a maximum transfer rate of 48 MHz. The module supports the latest transmission standards 802.11b and g (11 and 54 Mbit/s in the 2.4 GHz range), as well as the security standards in compliance with 802.11i (WEP and WPA), and offers two antenna terminals for optimising reception and transmission.
      • An FK61-WL01 Development Kit will be offered for users to develop their own Wireless LAN solutions inexpensively and quickly. As well as the WLAN module and an adapter board for the existing DK61 IPC@CHIP® Development Kit, it also contains all the software libraries required, the documentation and a demo implementation with web configurator. It is also possible to configure the Wireless LAN module directly from the application program via a C-API, as well as using the freely adjustable web configurator.
  • Airbee Wireless  (1)
    • Airbee ZMAC
      Fully ZigBee ready and complies completely with IEEE 802.15.4 specifications (+)

      Features:

      • Ready for integration with any application code enabling short-range wireless com
      • MAC (Medium Access Control) - The IEEE 802.15.4 MAC contains the protocol stack that enables peer-to-peer secure communications and performs management of peer and network connectivity with other ZigBee devices
      • Airbee-ZMAC is the foundation for wireless networking utilizing either Star or Mesh network topologies
  • Advantech Corporation  (8)
    • EKI-6311G
      Advantech Introduces 802.11b/g Industrial Wireless Access Point (+)

      Features:

      41480.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-6311G 802.11 b/g Wireless Access Point, Client Bridge and Repeater, which offers standards-based and license-free wireless connectivity for industrial devices, equipment, and applications
      • For maximum flexibility, the EKI-6311G supports multiple operating modes
      • As an Access Point, it allows wireless devices to communication with each other and with 10/100Base-TX Ethernet wired networks
    • EGD-4100W/4110W
      The EDG-4100W and EDG-4110W are RS-232 or RS-422/485 to WLAN data gateway modules (+)

      Features:

      • The Industrial Automation Group of Advantech introduces the EDG-4100W and EDG-4110W, serial to wireless 802.11b boards for enabling wireless networking
      • Their 54 x 59 mm compact design can fit into almost any legacy OEM serial device and connect it to the wireless Ethernet world. Virtual COMport mapping is provided by both modules for convenient communications with the host PC through an 802.11b wireless network
      • The inclusion of digital I/O is a competitive advantage over similar modules
    • EGD-4100W and EDG-4110W
      RS-232 or RS-422/485 to WLAN data gateway modules (+)

      Features:

      • Serial to wireless 802.11b boards for enabling wireless networking
      • 54 mm x 59 mm compact design can fit into almost any legacy OEM serial device and connect it to the wireless Ethernet world
      • Virtual COMport mapping is provided by both modules for convenient communications with the host PC through an 802.11b wireless network
    • EKI-6311GN
      Advantech Introduces an 802.11n Wireless Access Point for High-Speed Transmissions (+)

      Features:

      46262.jpg
      • The Industrial Automation Group of Advantech introduces the EKI-6311GN, an IEEE 802.11n industrial wireless access point. The EKI-6311GN delivers three times the throughput rates of a normal 802.11g. It is fully backward compatible with legacy 802.11b/g frequencies. With the support of STP, WMM, and IGMP snooping protocols, the EKI-6311GN effectively improves the reliability of wireless connectivity. The EKI-6311GN can achieve data rates up to 150Mbps, which allows high-speed internet access with various data and network video surveillance transmissions. It provides 600mW high output power for long-range deployment up to 5km. Also, a Power over Ethernet injector enables a unified supply of data and power through a standard Ethernet cable. To maximize wireless network security and privacy, the EKI-6311GN incorporates 64/128/152-bit WEP data encryption, WPA, WPA2, 802.1x, which can filter external user and prevent illegal attacking. Some other EKI-6311GN features include, embedded 8dBi directional antenna with external N-type connector, wide operating temperature range (-20 ~ 70°C), and IP55 waterproof certification. [...]
    • ADAM-4570W
      A cost-effective data gateway between RS-232/422/485 and 802.11b wireless LAN interfaces (+)

      Features:

      • The ADAM-4570W is functionally transparent, efficient, and cost effective when legacy H/W and S/W must continued to be used
      • Brings the advantage of remote management and data accessibility to RS-232/422/485 devices that cannot connect to the Wireless Ethernet network
      • Supports 802.11b
    • ADAM-6000W series
      Advantech launches Wireless Ethernet I/O Modules (+)

      Features:

      • (Cincinnati, Ohio – 11/17/2005) - The Industrial Automation Group of Advantech introduces the ADAM-6000W series wireless Ethernet digital I/O modules equipped with an embedded JAVA web page for remote status and control.
      • The ADAM-6050W, ADAM-6051W, and ADAM-6060W meet many diverse applications as they are equipped with numerous features and functions known as Smart I/O. The inputs can be configured to read a frequency signal, act as a counter, latching input or normal input. The outputs can be configured as pulse outputs, delayed outputs, and standard output. The output modules have a built-in communications watchdog which allows each output channel to be set to a known state if communication is lost. The user friendly interface allows for simple changes to the embedded JAVA web page without requiring JAVA programming knowledge. The units allow eight simultaneous web clients for viewing I/O status and control, if needed.
      • The ADAM-6000W series I/O modules use a wireless Ethernet standard IEEE802.11b as it is the most popular wireless network. They support Modbus/TCP and UDP protocols. These units handle industrial power and can be din-rail or panel mounted. The I/O design is suitable for applications such as building automation, environmental monitoring, production monitoring, and facility management.
    • EIS-D110 – Edge Intelligence Server
      This powerful and complete IoT gateway starter kit empowers your IoT project with a reliable platform and open gateway technologies. The package includes a ready-to-run fanless automation system (Intel® Celeron® J1900 platform & Windows® 7 Embedded), IoT platform software, development kit and technical support service. Also included is Microsoft® Azure® service integration to provide data communication and management between local sensors and private/public cloud for IoT applications. (+)

      Features:

      3672114698611778632.jpg
      • Integrated hardware plus software to build up edge-to-cloud applications
      • Pre-configured system: Intel® Celeron® J1900 SoC, WES7E/Win 10 Enterprise with 4GB Memory, 64 GB SSD and wireless networking
      • Pre-integrated WISE-PaaS Software Package: WISE-PaaS/RMM, WISEPaaS/OTA, WISE-PaaS/Security, WebAccess/SCADA, WebAccess/IMM and WebAccess/HMI
    • EIS-D110 - Entry Level Edge Intelligence Server
      Advantech designs and manufactures a broad selection of embedded boards and has recently positioned itself as a leading IoT solution provider specializing in edge computing. The EIS is a new form of IoT gateway offering combination of fanless PC and Advantech WISE-Pass (Platform as Service) software solutions as well as Microsoft Azure cloud services into a single computing platform to provide data communication and management between local sensors and private/public cloud for IoT applications. Advantech's EIS-D110 uses ARK-1123H plus Hardware (RAM, wifi, SSD) with embedded software (WES7, WISE-PAAS) and features ready to run fanless PC with pre-configured Advantech WISE-Pass SW in a regular Advantech OEM packaging. (+)

      Features:

      366092117622671433.jpg
      • Integrated hardware plus software to build up edge-to-cloud applications
      • Pre-configured system: Intel® Celeron® J1900 SoC, WES7E/Win 10 Enterprise with 4GB Memory, 64 GB SSD and wireless networking
      • Pre-integrated WISE-PaaS Software Package: WISE-PaaS/RMM, WISEPaaS/OTA, WISE-PaaS/Security, WebAccess/SCADA, WebAccess/IMM and WebAccess/HMI
  • Sierra Wireless  (1)
    • MC8780 embedded mod
      Fujitsu Siemens Computers has selected the new Sierra Wireless MC8780 embedded module for integration into the newly launched LIFEBOOK P7230 professional notebook. (+)

      Features:

      • The Sierra Wireless MC8780 embedded module offers faster download speeds than previous models, with peak data rates of up to 7.2 megabits per second (Mbps). In addition, it is the first Sierra Wireless module designed for HSUPA networks, with uplink speeds more than five times faster than those available on current networks – up to 2 Mbps. The faster uplink speed is particularly important for customers who routinely send large files over the wireless network while mobile.
      • The LIFEBOOK P7230 is the first in the product line to migrate to the Sierra Wireless HSUPA module and is expected to begin commercial shipments in Europe this summer.
      • “Embedded UMTS enables easy data access whenever and wherever the users are. To optimize the benefits that embedded UMTS brings, speed is an integral part. The improvements to data speed and uplink provided by HSUPA technology are therefore another important step,” said Andreas Thimmel, Senior Vice President Volume Business at Fujitsu Siemens Computers. “We want the LIFEBOOK P7230 to offer the best possible mobile user experience, and collaborating with Sierra Wireless to integrate the latest in mobile broadband technology is a key part of delivering true mobility.”
  • SENA Technologies  (2)
    • PSx10W Series
      Wireless Device Server product line (+)

      Features:

      35186.jpg
      • 802.11b/g type wireless network interface, WPA2 and 802.11i compliant wireless security
      • flexible operation mode
      • TCP/UDP multicasting, telnet COM port control protocol support (RFC2217 compliant)
    • Promi-SD Adapter
      The Promi-SD is a Bluetooth serial adapter product line designed to replace RS-232 serial cables with wireless connectivity when interconnecting peripheral devices (+)

      Features:

      • Provides transparent RS-232 serial cable replacement
      • Supports Bluetooth Serial Port Profile and Generic Access Profile
      • Interoperability with PDA, laptops, and more
  • Atmel Corporation  (3)
    • ZigBee RF4CE wireless/REB231ED-EK evaluation kits
      The ZigBee RF4CE wireless evaluation kit designed for ZigBee PRO and ZigBee RF4CE application development, and prototyping and the REB231ED-EK evaluation kit with antenna diversity support for the Atmel AT86RF231 device (+)

      Features:

      52213.jpg
      • Kits support ZigBee application profiles as well as IEEE 802.15.4 and proprietary wireless applications
      • Kits come with reference boards based on the Atmel ATmega128RFA1 and AT86RF231 wireless low-power transceivers and ZigBee-compliant software stacks ready for download at Atmel's website
      • [...]
    • AT76C902
      A second generation Voice over IP (VoIP) chip, designed for 802.11a/g wireless VoIP applications (+)

      Features:

      • The AT76C902 consists of an ARM946 processor for VoIP call control, authentication and signaling functions, and two subsystems - an ARM7and 802.11a/g Media Access Controller (MAC) that implements the 802.11a/g protocols, and a TEAK TeakDSPCore and integrated voice codec for voice processing function
      • Atmel's AT76C902 supports Wi-Fi Multimedia (WMM) and WMM Power Save modes
      • By supporting U-APSD and Scheduled APSD (S-APSD), solutions based on Atmel's AT76C902 have talk times of over six hours and stand-by times of over 220 hours on a 900 mA battery
    • AT73C203
      Standard power and battery management device for 3G wireless platforms (+)

      Features:

      17127.jpg
      • Provides an integrated solution for portable and handheld applications based on microprocessors that require smart power management functions, such as 3G phones, PDAs, palmtop computers, point-of-sale terminals, and 3G modems
      • Complete set of power supplies and interfacing systems based on Intel XScale processors
      • Three sets of step-down switching converters supply application cores, memories, and analog blocks, each with up to 1.2A
  • Redpine Signals  (2)
    • RS9116 Connectivity Product Family
      Redpine Signals RS9116 family of SoCs and modules provides a comprehensive multi-protocol wireless connectivity solution including 802.11 a/b/g/n (2.4 GHz and 5 GHz), 802.11j, dual-mode Bluetooth® 5 and 802.15.4 (capable of running Thread or ZigBee®). Solution Highlights: (+)

      Features:

      4136331213967296643.jpg
      • Co-existence of multiple wireless protocols managed by an internal protocol arbitration manager
      • Ultra-low power consumption with multiple power modes to reduce the system energy consumption
      • Multiple levels of security including FIPS 140-2 and PUF (Physically Unclonable Function) to create a highly secure system
    • Ultra-Low Power RS14100 Wireless MCU
      Redpine Signals RS14100 WiSeMCU family of SoCs and modules are the industry’s first Wireless Secure MCU family with a comprehensive multi-protocol wireless sub-system. The RS14100 has an integrated ARM Cortex-M4F ultra-low-power microcontroller, a built-in wireless subsystem, advanced security, high performance mixed-signal peripherals, and integrated power-management. Highlights include industry’s lowest Wi-Fi standby associated power, smallest integrated module, and highest level of throughput in a secure device. [...] (+)

      Features:

      4012233099124190052.jpg
  • GreenPeak Technologies  (2)
    • Lime CM-08
      A tiny 5 cm2 (< 1 square inch) device that functions as a stand-alone communications system with transceiver, antenna, and low-power mesh network software onboard (+)

      Features:

      • Wireless transceiver and sensor interface allow users to connect appropriate sensors such as photocells, vibration detectors, infrared, or other devices
      • Onboard software adapts the available power to the device's consumption
      • Built-in mesh technology enables designers to create extended wireless IEEE 802.15.4 open standard [...]
    • EMERALD GP500C
      The Emerald GP500C is a communications controller chip for ultra low power wireless sensor networks (+)

      Features:

      37646.jpg
      • Has extreme low power features that enable energy harvesting solutions for wireless sensor networks
      • Incorporates a transceiver with a fully integrated communications layer and an on-chip energy manager
      • Is an “autonomous transceiver” able to drive and control the data communication instead of being driven by a microcontroller [...]
  • National Instruments  (1)
    • PXIe-8108
      High-performance embedded controller, which features an Intel Core 2 Duo T9400 processor and is designed to significantly reduce test times for PXI Express - and CompactPCI Express-based automated test systems (+)

      Features:

      42408.jpg
      • Engineers can use this 3U embedded controller in any PXI Express chassis to create a compact, high-performance PC-based platform for many test, measurement and control applications
      • With its 2.53 GHz dual-core processor, 800 MHz DDR2 memory and 1 GBps total system bandwidth, the NI PXIe-8108 is ideal for advanced RF and wireless test applications, high-throughput data acquisition systems and other applications that require intensive analysis, signal or image processing
      • NI PXIe-8108 optimizes RF and wireless test applications because measurement speed is related to the computational performance of the test system's controller
  • Digi International  (2)
    • ConnectCore Wi-MX51
      Core module designed specifically for low-power, wireless multimedia applications (+)

      Features:

      43807.jpg
      • First wireless enabled core module based on Freescale's new high-performance i.MX51 processor
      • First to offer 802.11 a/b/g/n Wi-Fi and first to support Microsoft's new Windows CE 6.0 R3
      • The ConnectCore Wi-MX51 enables wired and Wi-Fi networking for low power embedded applications with demanding performance requirements such as displays within medical devices, digital signage, security/access control devices, point-of-sale equipment and industrial automation technology
    • iDigi start kits
      iDigi is termed “Platform as a Service” (PaaS) for developing wireless applications. With access to a sandbox development environment and other hosted software over a Web services interface, the platform connects to devices seamlessly so developers can focus on applications (+)

      Features:

      41800.jpg
      • The iDigi X4 Starter Kit ZB is ZigBee-based, with an XBee module, wall router, light and temperature sensors, and an IP-to-ZigBee gateway
      • The iDigi Wi-9P Starter Kit ZB has an ARM9 module, Wi-Fi module, ZigBee module and wall router, the same light and temp sensors, and a Python-based software environment
      • The iDigi BL4S100 Add-on Kit ZB adds a Rabbit BL4S100 SBC with its I/O features
  • WinSystems, Inc.  (13)
    • Embed Connectivity
      The LBC-GX500 achieves significant advancement in the application of wired and wireless connectivity technology applied to single board computers (+)

      Features:

      33634.jpg
      • Connectivity options include 802.11 wireless Ethernet, GSM/GPRS/CDMA cellular modem, ZigBee wireless RF module, 10/100 wired Ethernet, global-compliant dial-up (POTS) modem, six USB ports, and six COM channels
      • Provides an open and powerful industrial platform for management of geographically distributed machinery and sensors with a operational temperature of -40 °C to +85 °C
      • Full-featured SBC with a variety of on-board peripherals which eliminate the need for other I/O card
    • PCM-ZIGBEE
      WinSystems' PCM-ZigBee is a PC/104-compatible board configured with a ZigBee wireless transceiver plus an optional Trimble GPS receiver (+)

      Features:

      35122.jpg
      • Addresses the unique need of most remote monitoring and control and sensor network applications
      • IEEE 802.15.4 ZigBee wireless interface
      • PC/104-compatible with XBee Pro transceiver
    • PXM-MiniPCIe
      SUMIT-ISM board format defined by the SFF-SIG (+)

      Features:

      45042.jpg
      • Features a PCI Express (PCIe) MiniCard socket, which supports PCIe x1 and USB 2.0, as well as connections to an SMBus, LEDs for wireless network visual status, a SIM card for GSM and WCDMA application data storage, and a +1.5 and +3.3 V power source for the MiniCard
      • Can support different applications in the same socket
      • The removable MiniCard enables the addition of wireless functions such as WLAN, 802.11 a/g, cellular data, and Bluetooth
    • 802.11 Module
      IEEE 802.11b/g Wi-Fi wireless LAN support (+)

      Features:

      • Up to 54 Mbps at 2.4 GHz
      • Industry standard wireless LAN security
      • Supports single or dual antennas
    • PPM-Wireless
      IEEE 802.11b/g standard, dual-mode, Wi-Fi-certified wireless LAN support (+)

      Features:

      20939.jpg
      • Up to 54 Mbps at 2.4 GHz
      • Industry-standard wireless LAN security support and upgradeable support for AES software implementation
      • Support for optional antenna for optimized WLAN performance for multi-antenna systems
    • Mini
      SUMIT-ISM module supports MiniPCIe cards for a variety of Wireless Technologies (+)

      Features:

      45062.jpg
      • Adds wireless LAN, WPAN, or WWAN communications to SUMIT-based systems
      • SUMIT-ISM module with MiniPCIe and USB support
      • MiniPCIe Connector includes: support for both Full and Half size PCIe MiniCards
    • PCM-GPS
      A dual-function PC/104 module featuring a GPS receiver and cellular modem (+)

      Features:

      25323.jpg
      • Ideal for fixed and mobile embedded applications that require navigation, tracking, data logging, timing, and/or communications functions
      • GPS features: Lassen GPS receiver module provides position, velocity, and time data; TSIP, TAIP, and NEMA 0183 protocols; very low power requirement; supports pulse output for accurate time standard; external powered antenna connection via a standard SMA connector
      • Cellular wireless features: supports both GSM/GPRS and CDMA; socket support for Multitech wireless module; recognizes standard AT commands; alarm management, phone book management, and Short Message Services (SMS); Bluetooth support available soon
    • M2M Enabled SBC
      AMD Geode GX500@1W processor (+)

      Features:

      • High-resolution video controller supports CRT or LCD panels
      • 10/100 Mbps Ethernet controller and wireless 802.11
      • Supports POTS modem, GPRS/CDMA cellular modem, ZigBee and optional GPS receiver module
    • LBC-GX500 SBC
      A highly integrated SBC with GSM/CDMA, ZigBee, wireless 802.11 Ethernet, 10/100 Ethernet, dial-up modem, six USB ports, and six COM channels all on one card (+)

      Features:

      32072.jpg
      • AMD Geode GX500 @ 1 W processor with -40 °C to +85 °C operation
      • EBX-size board, 5.75" x 8.00" (147 mm x 203 mm)
      • Up to 512 MB of system PC2700 DDR SDRAM supported in a 200-pin SODIMM socket
    • I/O-Intensive SBC
      A small, rugged, EPIC-compliant board (+)

      Features:

      35876.jpg
      • AMD GX500 at 1 W processor
      • Video with CRT or flat panel support
      • Ethernet, two USB, four COM, and 24 DIO channels
    • 12.1-inch Open-Frame Panel PC for Indust
      WinSystems' 12.1-inch open frame, color flat panel PC and 1.66GHz single board computer (SBC) based on the Intel® Atom. PPC3-12 is a compact, ready-to-mount flat panel display subsystem that also includes a resistive touchscreen integrated into a chassis less than 3" deep. It is perfect for networked applications since it is shipped with a wired Ethernet connection plus expansion option for 802.11 wireless Ethernet and/or CDMA/GSM cellular modems. The unit will operate from -30° to +70°C without the need of a fan. (+)

      Features:

      209658510052926618.jpg
      • Compact 12.1-inch AM TFT Flat Panel Display, 1024 x 768 resolution with LED backlight
      • Quick-response resistive touchscreen included
      • Includes PC-compatible Atom SBC with Fanless single core 1.66GHz Intel Atom N455 or dual core 1.8GHz D525
    • PCM-GPS
      A dual function PC/104-compatible module that supports both a GPS receiver and a socket cellular modem (+)

      Features:

      • GPS receiver provides position, velocity, and time data
      • Supports TSIP, TAIP, and NEMA 0183 protocols
      • Cellular wireless supports both GSM/GPRS and CDMA
    • GPS Receiver Module
      A dual function PC/104-compatible module that supports both a GPS receiver and a socket cellular modem (+)

      Features:

      • GPS receiver provides position, velocity, and time data
      • Supports TSIP, TAIP, and NEMA 0183 protocols
      • Cellular wireless supports both GSM/GPRS and CDMA
  • Fractus Antennas  (3)
    • RUN mXTEND
      The RUN mXTENDTM Antenna Booster has been specifically designed for providing multiband performance in wireless devices (in particular in mobile devices), enabling worldwide coverage by allowing operation in the communication standards GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500, LTE2600, LTE3500 and LTE3700. (+)

      Features:

      364169536898682741.jpg
      • Bands: GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500, LTE2600, LTE3500 and LTE3700
      • Dimensions: 12.0 mm x 3.0 mm x 2.4 mm
      • Off the shelf
    • BAR mXTEND
      The BAR mXTENDTM Antenna Booster has been specifically designed for providing multiband performance in wireless devices (in particular in mobile devices), enabling worldwide coverage by allowing operation in the communication standards GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500 and LTE2600. (+)

      Features:

      364170101898226327.jpg
      • Bands: GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500 and LTE2600
      • Dimensions: 10.0 mm x 3.2 mm x 3.2 mm
      • Off the shelf
    • ALL mXTEND
      The ALL mXTENDTM Antenna Booster has been specifically designed for providing multiband performance in wireless devices (in particular in mobile devices), enabling worldwide coverage by allowing operation in the communication standards GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500, LTE2600. (+)

      Features:

      364169270898439668.jpg
      • Bands: GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500, LTE2600
      • Dimensions: 24.0 mm x 12.0 mm x 2.0 mm
      • Off the shelf
  • Luxul Wireless  (1)
    • Pro-WAV 100/200
      Pro-WAV 100 and 200 series Wi-Fi signal range extenders help customers save money and time during installation and maintenance (+)

      Features:

      • A single Pro-WAV 100 covers an area of 10,000 square feet (3,050 square meters) or more while penetrating most typical office construction and providing increased performance and quality over other wireless systems
      • A single Pro-WAV 200 can efficiently cover an area of 50,000 square feet (15,250 square meters) or more while penetrating office construction and providing increased performance and quality over other wireless systems
      • Both Pro-WAV systems are compatible with any 802.11 b/g Wireless Access Point (WAP) [...]
  • congatec inc  (2)
    • IoT Gateway Platform
      congatec introduces a flexible IoT gateway platform that is application ready and easily customizable for rapid field deployment. The IoT gateway offers extreme levels of flexibility in terms of processing performance and software integration, is able to host up to 8 wireless antennas that can be connected to 3 mini PCI Express slots and 6 internal USB based slots for wireless and wired connectivity modules. Customized system designs are also possible upon request. (+)

      Features:

      350368048861902469.jpg
      • Scalable computing performance utilizing Qseven modules, which range from the NXP single-core i.MX6 processor up to a quad core Intel® Pentium® CPU
      • Mount up to 8 antennas supporting multiple wireless standards in parallel, while enhancing signal quality by utilizing antenna diversity
      • 6 internal USB ports and 3 mini PCIe slots are available and able to support LTE 3GPP modems, 2x WI-FI, 2x LAN with PoE and PROFINET features, low power BlueTooth (BTLE) and 6LoWPAN
    • conga-SKIT SMARC 2.0 Starter Kit
      Introducing the SMARC 2.0 Quick Starter Kit for Intel® Atom™ processors. The kit comes with congatec’s first SMARC 2.0 module – the conga-SA5 – and everything developers need for the immediate evaluation of the new SMARC 2.0 standard and the latest Intel® Atom™ processor generation. Application engineers of connected Industry 4.0 and wireless IoT devices will love the option of the integrated wireless interfaces with standardized antenna connectors on board. [...] (+)

      Features:

      3823408478615879445.jpg
  • Grid Connect  (1)
    • ConnectSense
      ConnectSense is a platform of low-cost, cloud-based Wi-Fi 802.11b/g wireless sensors that monitor changes in the user’s environment and then sends notifications via phone call, email, text or Tweet. Sensors are available to monitor temperature, humidity, water, motion, security and light. (+)

      Features:

      268419209871919406.jpg
      • Wireless sensor
      • Works using Wi-Fi, no recurring monthly charges
      • DIY installation
  • SCL Elements  (1)
    • CAN2GO
      Second generation CAN2GO Universal and VAV controllers (+)

      Features:

      52792.jpg
      • GW2 gateway
      • 400 MHz processors
      • 64MB of RAM
  • Monnit Corporation  (1)
    • Monnit Mine
      Monnit Mineâ„¢ is an open software platform that provides the ability to integrate Monnit wireless sensors and gateways with your own software system. Monnit wireless gateways can be unlocked, allowing them to be directed to a custom host or IP address, where an installation of Monnit Mine works as a translation application between Monnit wireless sensors networks and existing or custom software applications. (+)

      Features:

      312281144757128377.jpg
      • Has API in standard programming languages for easy integration (currently .Net / Java – other languages coming soon.)
      • Can be setup and receiving data in just a few minutes
      • Implements broad range of sensors and gateways into existing monitoring solution instead of having to implement one sensor at a time
  • ADLINK Technology, Inc.  (2)
    • MXE-202i intelligent loT gateway
      The ADLINK Intelligent IoT Gateway Starter Kit provides a complete loT connection solution for reduced development time and quick deployment for every application environment. The loT Gateway Starter Kit includes ADLINK’s MXE-202i intelligent loT gateway, based on Intel® Atom™ E3826 processors, ADLINK’s EdgePro loT device & sensor management application, one light sensor and corresponding siren output, Modbus TCP module and accessories, utilizing industrial open standard protocols with security functions powered by Intel® loT Gateway Technology. (+)

      Features:

      350207589861132636.jpg
      • Provides a complete IoT connection solution for accelerated IoT application development
      • Easy configuration with user-friendly administrator interface and dashboards
      • Built-in ADLINK SEMA & SEMA Cloud remote management solution
    • XE-1400 Fanless Embedded Computer
      Combining superior processor performance, wireless capability, and rich, scalable I/O in a compact and robust package, the ADLINK MXE-1400 is an ideal choice for a wide range of applications supporting intelligent transportation, in-vehicle multimedia, and surveillance and factory automation applications. (+)

      Features:

      322951863942178158.jpg
      • Quad-core Intel® Atomâ„¢ E3845 processors
      • Single side I/O with easy access SATA drive bay
      • Compact 210 (W) x 170 (D) x 70 (H) mm housing
  • Luxoft  (1)
    • BitCatcher ZigBee Network Analyzer
      Free-to-download BitCatcher is a simple and powerful tool for analyzing wireless transmissions over IEEE 802.15.4/ZigBee-based networks covering both US and European ISM bands. BitCatcher parses and displays packet information based on a customizable protocol description. Developers can modify the descriptions to extend existing protocols or to create new ones. BitCatcher comes with the preloaded wireless protocol descriptions for IEEE 802.15.4 MAC, ZigBee PRO, ZigBee Smart Energy, and ZigBee Light Link. Drivers and firmware for Atmel hardware platform are also included. (+)

      Features:

      228303566312419251.jpg
      • Windows and Linux support
      • Support of various 802.15.4 frequency bands: 2.4 GHz, 868 MHz and 915 MHz
      • Native ZigBee and Light Link specific security schemes support
  • Intrinsyc Software  (2)
    • i-RIL and i-MUX
      The i-RIL (Intrinsyc Radio Interface Layer) and i-MUX (Intrinsyc Multiplexer) are off-the-shelf software components for wireless handheld development (+)

      Features:

      • Can be used with wireless handhelds based on Windows Mobile 2003 software for Pocket PCs and Smartphones
      • i-RIL provides the underlying technology for enabling wireless voice or data applications using Windows Mobile software to communicate with a GSM/GPRS or CDMA2000 modem
      • It is a customized layer of software code that operates with Microsoft's Cellcore telephony stack
    • CerfPod 270M Developer's Kit
      Intrinsyc Software's CerfPod 270M was designed in collaboration with Intel, and is a full-featured, flexible platform that is an ideal starting point for a next generation, mobile, wireless device or embedded solution (+)

      Features:

      • Based on the newest Intel XScale processor, the PXA270, and the Intel 2700G Multimedia Accelerator
      • Multimedia capabilities (full VGA support with video and 3D graphics acceleration), connection options, and board support package make it a comprehensive reference platform for creating a next generation high-end mobile, wireless, or embedded solution
      • High-contrast, 10.4” (diagonal), 256K color, 640x480 resolution, TFT LCD with CCFL backlighting and a resistive touch screen; landscape and portrait modes
  • LS Research  (3)
    • TiWiConnect Platform for IoT Design
      The TiWiConnect Internet of Things (IoT) Platform from LSR simplifies and accelerates the process of adding wireless/cloud connectivity and smartphone-controlled capabilities to IoT products. TiWiConnect is an end-to-end solution that provides all three of the critical components that companies need for their IoT design projects. (+)

      Features:

      313267113981116822.jpg
      • First end-to-end solution that provides all three of the critical components that companies need for their IoT design projects.
      • Provides the embedded wireless module and related software, which together add Wi-Fi capabilities to a product.
      • Provides the cloud server software and hosting services necessary to access and manage the product from anywhere.
    • SaBLE-x Bluetooth® Smart module
      LSR’s new Serial-to-BLE software solution simplifies the process of adding Bluetooth wireless capabilities to products that engineers are working on. It gives engineers a much faster and less frustrating way of building wireless capabilities into a product, and it comes from LSR, which has been a trusted name in wireless design for almost four decades. [...] (+)

      Features:

      319543223211105542.jpg
    • SaBLE-x Bluetooth Smart module
      SaBLE-x™ Bluetooth® Smart module is the first certified module solution based on the new TI SimpleLink™ Bluetooth Smart CC2640 wireless MCU. The SaBLE-x module offers superior RF performance for BLE applications, providing over twice the signal range of previous generation BLE technology, and can operate at nearly 1/3 the average power for a 1 second connection interval when compared to previous BLE modules. In addition, developers will be able to access an unmatched suite of intuitive software tools that remove complexity and accelerate development times. (+)

      Features:

      300773392285678845.jpg
      • Latest silicon technology delivers 8 dBm link margin improvement vs. current Bluetooth low energy modules
      • Features ARM Cortex-M3 processor for host applications and an ARM Cortex-M0 dedicated for the RF core
      • Dedicated Sensor Processor for even lower power operation
  • Quanmax  (2)
    • UbiQ-100 Series
      UbiQ-100 Series is a fanless IoT gateway integrating Intel® BayTrail Atom™ E3815/E3825 / Celeron® N2930 SoC Processor into a small footprint. Combining two GbE LAN ports and two mPCIe slots for wireless expansion, it enables flexible connections between edge devices and data center through the wired or wireless networks. (+)

      Features:

      341878748132648226.jpg
      • Intel® BayTrail SoC Processor, Atomâ„¢ E3815/E3825 / Celeron® N2930
      • 2GB/4GB DDR3L 1600 memory onboard
      • 16GB/32GB eMMC onboard, 1x Micro SD Card Cage for storgae
    • HPC-1000
      The HPC-1000 10.1" Panel PCs is combining the latest 45nm Intel Atom processor with the Intel 945GSE/ ICH7-M chipset for the most demanding home automation requirements (+)

      Features:

      • Intel Atom Processor N270
      • Intel945GSE / ICH7-M
      • Resistive 5-wire TouchScreen
  • NEXCOM International Co LTD  (1)
    • Mobile Tablet PC
      Intel Atom Processor N450 based 8" Fan-less Tablet PC Supports / Touch Screen/ Laser Barcode Scanner/ RFID / 3.5G wireless/ GPRS/ Wi-Fi/ Bluetooth/ Digital Camera (+)

      Features:

      45721.jpg
      • Hot Swappable Battery
      • 8" LCD (VGA with LED backlight) with 5-wires resistive touch screen
      • Daylight Readable Display
  • Microchip Technology, Inc.  (2)
    • PICDEM Z Demo Kit
      An ZigBee Technology wireless communication protocol development and demonstration platform (+)

      Features:

      • ZigBee software stack supporting RFD (Reduced Function Device), FFD (Full Function Device) and coordinator
      • Daughtercard with Microchip MRF24J40 IEEE-802.15.4 2.4 GHz transceiver
      • Microchip sniffer board with USB interface
    • MCP2030 AFE
      The MCP2030 is a stand-alone, analog front end (AFE) for smart, low frequency (125 kHz typical) wireless authentication applications such as passive-keyless-entry, tire pressure measurement systems (TPMS) and data acquisition. (+)

      Features:

      • Three input pins for three axis reception
      • Adjustable high input detection sensitivity (3 mVpp typical)
      • Programmable antenna tuning capacitance (63 pF, 1 pF/step)
  • Laird Technologies  (4)
    • Laird's Dual-Band Wi-Fi+Bluetooth Module
      Laird has released its new 50 Series Enterprise Wi-Fi® + Bluetooth© modules, the next-generation of its popular dual-band embedded wireless modules that provide product engineers with a pre-certified solution that is optimized to ensure reliable, robust, secure connectivity in difficult RF environments. The 50 Series family of modules is designed to thrive in challenging settings with obstacles such as dense wireless signal traffic and complex physical geography, including hospitals, industrial sites, public areas and more. (+)

      Features:

      342255186231284384.jpg
      • Building on the well-regarded 40 and 45 series from Laird, the new 50 Series modules feature dual-band Wi-Fi® with 2x2 MIMO (Multiple-Input, Multiple-Output) capabilities, as well as both Classic Bluetooth and Bluetooth Smart capabilities.
      • The dual antennas improve reliability and further ensure that wireless connectivity is maintained so critical data can be shared at all times.
      • The 50 Series modules boast comprehensive, best-in-industry software with even faster scanning and roaming capability than prior generation solutions.
    • First LoRa+BLE wireless module for IoT
      Laird has introduced a new line of wireless modules that integrate long-range LoRa technology and short-range BLE technology for the first time in a commercial solution, giving companies the ability to create longer-range EIoT systems than previously possible with a single module. The RM1xx product family enables companies to dramatically expand the locations where IoT can be deployed by using the combination of long-range LoRa wireless technology and ultra low-power BLE technology integrated in the same module. http://www.lairdtech.com/products/rm1xx-lora-modules. (+)

      Features:

      342254675231494739.jpg
      • can transmit and receive data wirelessly between IoT deployments and gateways up to 10 miles apart (or longer with relays)
      • Integrating BLE with LoRa enables companies to deploy IoT networks that can go nearly anywhere, utilizing BLE for short-range, low-power connectivity between wireless devices while taking advantage of LoRa for communications over distance
      • In an industrial setting, for example, the RM1xx can monitor sensors on water, fuel, and chemical tanks throughout a facility via wireless low-power BLE technology or any traditional I/O connections
    • 50 Series Enterprise Wi-Fi® + Bluetooth©
      Laird announced the release of its new 50 Series Enterprise Wi-Fi® + Bluetooth© modules, next-generation of its popular dual-band embedded wireless modules that provide product engineers with a pre-certified solution that is optimized to ensure reliable, robust, secure connectivity in difficult RF environments. The 50 Series family of modules is designed to thrive in challenging settings with obstacles such as dense wireless signal traffic and complex physical geography, including hospitals, industrial sites, public areas and more. [...] (+)

      Features:

      337423410211954863.jpg
    • CL400
      The easy-to-use CL400 Wireless Ethernet Bridge provides outstanding data throughput and security for wireless applications in the M2M and industrial market segments with no configuration necessary. Users can simply plug in their Ethernet cable to apply power and have a wireless bridge at a distance up to one mile and speeds up to 11 Mbps, thereby extending the range of networks beyond the reach of traditional 802.11 access points. (+)

      Features:

      • Two CL400 units
      • Standard RJ-45 Ethernet jack
      • Two 2.4 MHz omnidirectional antennas with 5 dBi gain
  • EnOcean  (1)
    • STM100
      Energy harvesting (+)

      Features:

      21477.jpg
      • Self powered
      • Battery-less
      • Maintenance free
  • Synapse Wireless Inc.  (3)
    • Synapse's SNAP
      Synapse's SNAP® technology is an award-winning IEEE 802.15.4, auto-forming, multi-hop, mesh network stack combined with an embedded Python interpreter for running application code (+)

      Features:

      42743.jpg
      • Self-healing mesh network
      • Instant-ON: communicate within milliseconds of power-up
      • All devices are peers - every node can bridge, route, and sleep
    • Synapse's SNAPconnect
      Synapse's SNAPconnect provides a seamless interface between devices on a wireless SNAP network and client applications either hosted either locally or across the Internet (+)

      Features:

      42749.jpg
      • Connect to any SNAP network anywhere in the world from anywhere in the world
      • Nothing to add to SNAP
      • Designed from the ground up to work with TCP/IP
    • Synapse Portal
      Synapse's Portal is a wireless application development environment for building SNAP mesh networks, and provides complete access to all functions in every node on the SNAP network (+)

      Features:

      42744.jpg
      • Comprehensive administration tool for SNAP networks
      • Participates as a full-fledged peer on the network
      • Runs on Windows (2000, XP, Vista) or Linux
  • antcor  (1)
    • Ikarus OS
      Wireless AP mode (+)

      Features:

      20567.jpg
      • Wireless Client mode
      • Wireless Repeater mode
      • Wireless WDS mode
  • Phoenix Contact  (5)
    • RAD-80211-XD-BUS
      Wireless Ethernet Radio with modular I/O and firmware capabilities (+)

      Features:

      • Combines truly secure wireless communication with control of up to eight I/O modules
      • Up to 64 digital, analog, and pulse I/O can be interfaced directly to the radio
      • This flexibility saves installed cost for distributed Ethernet wireless I/O monitoring and control applications
    • RAD-ISM-900-EN-BUS
      A busable 900 MHz radio is the newest addition to Phoenix Contact's Trusted Wireless Ethernet (TWE) portfolio of industrial wireless products (+)

      Features:

      • The RAD-ISM-900-EN-BUS allows direct connection of I/O modules to the radio
      • The radio allows the user to collect I/O without a remotely located PLC or I/O data concentrator
      • The bused I/O is made accessible to the network using the readily available MODBUS protocol
    • RAD-WHG/WLAN-XD
      Phoenix Contact's new WirelessHART gateway features an integrated 802.11b/g WLAN transceiver (+)

      Features:

      46083.jpg
      • The rail-mount gateway can increase the reliability and flexibility of a HART system
      • The 45 mm-wide RAD-WHG/WLAN-XD connects up to 250 WirelessHART field devices, converting HART data to Modbus TCP or HART UDP for easy integration into almost any host system
      • The integrated WLAN can serve as the backhaul connection, allowing the gateway to be installed in the field closer to the monitored devices
    • FL WLAN 5101
      The FL WLAN 5101 offers high-speed wireless networking up to 300 Megabits per second (Mbps), meeting the needs of the most bandwidth-demanding applications such as IP-based video surveillance, plant networking and mobile operator access for programming and maintenance. (+)

      Features:

      225475709981449187.jpg
      • Offers high-speed wireless networking up to 300 Megabits per second (Mbps)
      • Meets the needs of the most bandwidth-demanding applications such as IP-based video surveillance, plant networking and mobile operator access for programming and maintenance.
      • The new CM (Cluster Management) technology simplifies wireless network management. All access points in a WLAN network can be easily configured and managed via a single web interface using any access point within the network, without additional costs for expensive hardware or software.
    • -SYS-NEMA4X-900
      Radio-ready enclosure simplifies the installation of industrial wireless radio modems and small RTU devices (+)

      Features:

      • Provides robust, secure solution for remote data collection while saving installation time and preventing wiring errors
      • Pre-wired power rail has space for either a Trusted Wireless or GSM/GPRS radio modem and other components
      • 24 VDC power with backup prevents failure of critical operations due to power dips and brownouts, while the surge arrestor protects against lightning and surges
  • Tellabs  (1)
    • VERITY 3100
      Family of echo cancelers and voice-quality enhancement solutions that remove both acoustic and hybrid echo, enabling wireless service providers to deliver wireline voice quality and echo-free service on both mobile-to-mobile and mobile-to-landline calls (+)

      Features:

      • Tellabs Acoustic Control (TAC) also eliminates the complex combination of acoustic echo encountered in the handset and hands-free mobile applications over digital wireless networks
      • Clipping is minimized and double-talk performance is enhanced
      • Tellabs Level Control (TLC) bidirectionally enhances the quality of landline and wireless telephone calls by automatically compensating for audio levels on a call-by-call basis
  • Panasonic Computer Solutions Company  (1)
    • CF-30 Toughbook
      A next-generation rugged “Toughbook” notebook computer (+)

      Features:

      32597.jpg
      • Ideal for mobile applications and mission-critical environments
      • Intel Core Duo Processor L2400 (2MB L2 cache), processor speed 1.66 GHz, 667 MHz FSB
      • 80 GB or 60 GB HDD, shock mounted and removable
  • HABEY USA  (1)
    • MIT-1800
      Compact Intel Atom based fanless embedded PC with four mini-PCIe slots, dual SIM and 3G wireless support (+)

      Features:

      • The WIT-1800 is developed around Intel's power-efficient Atom N450 and D410 processors plus ICH8M chipset
      • This unique four built-in mini-PCIe design enables the system to support two 3G mini-PCIe modules for dual 3G wireless communication as well as WiFi, SSD and other mini-PCIe devices
      • Standard interfaces include: one VGA port supports up to 2048x1536
  • Atific Oy Ltd.  (1)
    • Multi-radio WSN kit
      High performance FPGA based multi-radio wireless sensor network development kit (+)

      Features:

      • Extremely flexible and fully re-configurable development kit for developing new types of communication protocols, algorihms and computation architectures for mesh networking
      • Four parallel 1 Mbps radios with up to 83 selectable frequency channels allow simultaneous data exchanges with several neighbors
      • Up to four Altera NIOS softcore processors and custom HW accelerators synthesizable on FPGA enable powerful parallel computing and radio access
  • Vonger Electrical & Tech  (1)
    • VoCore2
      VoCore2: the coin-sized smart wireless router (+)

      Features:

      352928458041192167.jpg
      • small size: 2.8cm x 2.8cm x 2.0cm
      • 802.11n, max speed to 300Mbps
      • with micro sd slots
03/24/23 02:42
Close

Subscribe to Embedded Wireless updates