FPGA

Refine FPGA companies and products:
field-programmable gate array fpga fpgas
Click on any vendor
to see a listing of
FPGA related products.
  • GE Intelligent Platforms, Inc.  (15 of 18)
    • Tsunami PC104
      A Field Programmable Gate Array (FPGA) processor for PC/104-Plus systems (+)

      Features:

      17251.jpg
      • Integrates with the Wave FPGA software tool kit from SBS for easy application development
      • Suitable for mobile cart-based systems, machine sensor, and control I/O applications
      • Altera Stratix FPGAs on a 32-bit/33-MHz PCI interface with memory and high-bandwidth data paths
    • CompactPCI FPGA Processor
      Two Stratix EPS180 FPGAs (+)

      Features:

      19198.jpg
      • Two PMC sites with 1-GBps high-speed data paths to each FPGA
      • 8-GBps connection between FPGAs for a common processor fabric
      • Local bridges route 64-bit/66-Mhz CompactPCI backplane to PMC and FPGA local buses
    • 6U CPCI FPGA Processor
      Two Stratix™ EPS180 FPGAs (+)

      Features:

      19051.jpg
      • Two PMC sites with 1 GB high-speed data paths to each FPGA
      • 8-GB connection between FPGAs for a common processor fabric
      • Local bridges route 64-bit/66-MHz CompactPCI backplane to PMC and FPGA local buses
    • TS-CPCI-8002
      Dual EP1S80-C5 FPGA (+)

      Features:

      • Two 64/66 MHz PMC sites
      • Two 64 MB SDRAM
      • 2 MB SRAM
    • PCI-based FPGA processor
      Tsunami A40 delivers many times the processing of CPU or DSP boards (+)

      Features:

      19197.jpg
      • Altera EP1S40 FPGA on the PCI and expansion module(s)
      • 4 MB SRAM and 1 GB SDRAM on the A40 PCI base board
      • 8 MB SRAM and 384 MB SDRAM on A40 FPGA expansion modules
    • TS-CPCI-8001
      High-performance, FPGA-based computing platform for demanding signal and image processing applications (+)

      Features:

      21058.jpg
      • Suitable for SDR, sonar, and other high-performance signal processing applications
      • Dual Stratix EP1S80 FPGAs onboard
      • Two PMC sites with 1 GBps high-speed data paths to each FPGA
    • Tsumani 6U CPCI Development Kit
      FPGA processor solution targeted at high performance software defined radio applications (+)

      Features:

      • Dual Stratix EP1S80 FPGAs are tightly coupled to provide a power platform for signal processing
      • Two PMC module sites provide I/O connectivity to either front panel or back panel connections
      • A direct high bandwidth 1 GBps path from the PMC P4 connector directly to the FPGAs
    • TS-104-3001
      PCI/104 format for cost effective solutions (+)

      Features:

      • Tsunami Development Kit gets you up and running on an FPGA Computing platform in less than an hour
      • Wave FPGA Tool Kit provides API, drivers, source code, and more
      • 32 bit/ 33 MHz PCI bus provides maximum bandwidth to host resources [...]
    • Xilinx FPGA Blade
      PCI Software Radio Xilinx FPGA blade (+)

      Features:

      33584.jpg
      • GE Intelligent Platforms radio PMC products integrated with Virtex-II based FPGA PMC module to supplement the onboard FPGA
      • Single-slot solution
      • Large onboard memory
    • Tsunami C Development Kit
      A development kit that bundles the Celoxica DK Design Suite with the SBS Tsunami FPGA computing platform (+)

      Features:

      • Simple conversion from C to Handel-C
      • Direct compilation of Handel-C to Tsunami FPGA hardware
      • Provides for rapid iteration of algorithms and hardware/software partitioning
    • TS-DK-IT01
      An imaging development kit aimed at leveraging FPGA processing capabilities for high-performance imaging applications (+)

      Features:

      • Includes the SBS Tsunami FPGA platform, infrastructure software, development environment, and multiple resources for integration of CameraLink and other custom image processing applications [...]
    • CR-4
      1.4 GHz Intel Pentium M (+)

      Features:

      • FPGA GPIO controller
      • Ports/slots: 2x Ethernet and 2x USB
      • SATA host controller
    • VG5 - 6U VMEbus CPU
      PowerPC processors with AltiVec technology (+)

      Features:

      • Asymmetric Multiprocessing Architecture (ASMP)
      • Integrated Gigabit Ethernet and Fast Ethernet ports
      • Two PMC slots
    • ICS-1580
      FPGA DSP Board with high-speed Inputs in PMC format (+)

      Features:

      33574.jpg
      • Xilinx Virtex-II Pro FPGA with two on-chip PowerPC processor
      • Linux kernel pre-installed
      • 64 MB of SDRAM
    • PIO-PMC1
      PMC conduction cooled (+)

      Features:

      21192.jpg
      • User programmable Altera FPGA
      • PMC interface to PCI mezzanine conforms to the requirements of IEEE-1386.1-2002
      • Multiple I/O functions (analog, serial, discrete) all on the same PCI mezzanine card
  • Sundance Multiprocessor Technology Ltd.  (15 of 24)
    • SMT351
      Embedded reconfigurable computing modules based on Xilinx Virtex-II Pro field programmable gate arrays (FPGA) (+)

      Features:

      • 1 GB of storage in DDR SDRAM (Samsung K4H511638B-GC/LB3 or Micron MT46V32M16FN -6)
      • Up to 400 MBps throughput rate
      • 32-bit data width
    • SMT3311
      A CompactPCI FPGA board with five Altera APEX-600E FPGAs, ZBT SRAM, and Sundance Digital Bus (SDB) backplane on J3 (+)

      Features:

      • 128-point to 1 million-point FFT engine radar sonar
      • 16-bit complex input data format
      • 32-bit blocked floating-point output data format, extendable to 64 bits
    • SMT700 Virtex-5 PXI
      The SMT700 is a PXI express Chameleon board designed for a variety of FPGA-centric applications (+)

      Features:

      • Built around the fastest Virtex-5 FPGA, the SMT700 is a reconfigurable
      • Fastest Xilinx Virtex-5 LXT or SXT FPGA
      • 1 GB DDR2 SDRAM (64-bit)
    • SMT8090
      A development platform for the wireless and telecommunication markets (+)

      Features:

      18580.jpg
      • Two daughtercards (SMT338-VP and SMT390) are sandwiched together on a PCI carrier board
      • Two floating-point Ti TMS320C6713 processors at 225 MHz
      • Xilinx Virtex-II Pro (2VP30) FPGA with two IBM 400-MHz PowerPC processors and eight 3.125-Gbps, full-duplex serial links
    • SMT406
      A Tangor FPGA-based processor PMC module (+)

      Features:

      • Tangor processing engine uses a Xilinx Virtex-II from 2V4000 to 2V10000 FPGA as the processing component
      • 128 MB of 133 MHz SDRAM, controlled by the PCI controller and accessible from both the PCI bus and the FPGA
      • Four banks of 4 MB each 200 MHz DDR SRAM connected to the FPGA
    • SMT130
      Onboard XDS-510 compatible JTAG Master (+)

      Features:

      19175.jpg
      • Global bus bandwidth in excess of 100 MBps
      • Host interface via ComPort in excess of 10 Mbps
      • Can support multi-DSP and FPGA resources
    • DAQ likes it hot!
      The little SMT370-I offers a pair of 14-bit ADCs clocked at 105 MHz and a pair of 16-bit DACs clocked up to 400 MHz with interpolation (+)

      Features:

      • When integrated with its large Xilinx Virtex-II FPGA, the module can be combined with Sundance's extensive range of DSP, FPGA, storage, and radio modules to create full digital processing systems from COTS parts
      • With comprehensive support from 3L Diamond FPGA, can be easily integrated into complex arrays of modules, with all the otherwise tiresome configuration and communication functions handled behind the scenes using a simple but powerful GUI
      • Available now for a 10-off price of $6245, with OEM prices available on request
    • SMT362
      Scaleable twin DSP and FPGA based development system featuring two Texas Instruments TMS320C6455 DSPs and the long awaited Xilinx Virtex-4 FX60 FPGA. (+)

      Features:

      32297.jpg
      • A scaleable, modular TIM design.
      • With an operating frequency of 1GHz and 2MB on-chip level 2 cache each, The TMS320C6455 DSPs have the highest fixed-point processing power in the 'C6000 range. They they have integrated 256MB of DDR2-500 SDRAM for each of the DSPs giving developers an even greater ability to implement complex DSP tasks.
      • The stunning Virtex-4 FPGA FX60, that boasts nearly 60,000 logic cells and 16 RocketIO serial transceivers, allow users of the SMT362 to gain breakthrough performance at the lowest cost.
    • SMT364
      ADC Module (+)

      Features:

      • 14 Channels
      • 105 Mbps at 14 bit
      • Sundance High Speed Bus
    • SMT339
      Combining a Texas Instruments TMS320DM642 DSP-based digital media processor at 720 MHz and a Xilinx Virtex-4 FX-60 FPGA, the SMT339 packs huge compute power into a small development board (+)

      Features:

      • Software support includes TI's Code Composer Studio Integrated Development Environment (IDE) and 3L's Diamond FPGA
      • Interfaces include serial ports or the Rocket Serial Link
      • Used with a TIM carrier such as the SMT130 for PCI-104 or standalone, designers can be up and running quickly [...]
    • SMT377
      XC2v1000 FPGA (+)

      Features:

      • 1 Mbyte of ZBT RAM
      • Global Bus Technology
      • Eight channels of DAC outputs
    • SMT100: PCI/104-Express Virtex-5 FPGA Stackable Module
      USB 2.0 interface for flash programming (+)

      Features:

      44190.jpg
      • PCI 32-bit/33MHz
      • JTAG for debugging and FPGA programming
      • Sundance Local Bus (SLB) mezzanine card interface
    • SMT417
      Conduction cooled PMC/XMC card with 2 TI DSP at 1 GHz each and a Xilinx XC2VP50 FPGA and much memory (+)

      Features:

      32221.jpg
      • IEEE 1386 standard PMC form factor
      • High performance with two 1 GHz DSP and larger VP50 FPGA
      • Fast PCI-X interface and XMC
    • SMT390
      2 x 12 bit A/Ds @ 210 MHz (+)

      Features:

      • 2 x 4 channels rocket serial links, 400 MBps data bus, 20 MBps comports
      • Virtex II Pro FPGA for custom designs [...]
    • SMT356
      Simple implementation of multichannel solutions (+)

      Features:

      • Scalable system configuration
      • Direct connection from ADC to C6000 DSPs
      • Clock enable enhances control of data capture for burst mode applications
  • Extreme Engineering Solutions (X-ES)  (1)
    • XCalibur5090
      The XCalibur5090 is a high-performance, reconfigurable, conduction-cooled 6U LRM module featuring dual Xilinx Virtex-7 FPGAs, high-speed serial interfaces, DAC and ADC channels, external memory, and flexible, high-density I/O. The XCalibur5090 utilizes four AD9739 and two ADC12D1600RF to provide four channels of high-frequency 14-bit Digital Analog Conversion (DAC) at 2500 Mbps and four channels of 12-bit Analog Digital Conversion (ADC) at 3200 Mbps for high-performance Digital Signal Processing (DSP). (+)

      Features:

      314776900022905961.jpg
      • Two Xilinx Virtex-7 XC7VX690T FPGAs
      • Up to 1 GB of DDR3 SDRAM per FPGA in two channels
      • Non-volatile FPGA configuration flash
  • Synopsys, Inc.  (2)
    • Synplify Premier
      The Synopsys FPGA design solution comprises high-quality, high-performance, and easy-to-use FPGA implementation and debug tools (+)

      Features:

      46489.jpg
      • Designers using the Synopsys FPGA design tools gain fast time-to-results for complex FPGAs, area optimization for cost and power reduction, multi-FPGA vendor support, and incremental and team-design capabilities for faster FPGA design development
      • The Synopsys FPGA design tools also provide additional value by offering DesignWare IP integration, links to high-performance functional verification with VCS, integration with Synphony Model Compiler, and an ASIC compatible synthesis flow for FPGA-based prototyping
      • As part of the Synopsys FPGA Design Solution, Synplify Premier software performs FPGA synthesis for programmable devices sold by Actel, Achronix, Altera, Lattice Semiconductor, Silicon Blue and Xilinx
    • Synplify Premier
      Graph-based Physical Synthesis; fast timing closure and a push-button performance boost of up to 20 percent (+)

      Features:

      • RTL-based Verification Technology; offers the fastest method of finding functional errors in a design thanks to simulator-like visibility into a live, running FPGA with real-world stimulus
      • Automatic Handling of DSP functions; infers DSP functions from RTL and maps into vendor's DSP hardware (such as MAC)
      • ASIC design-style support; built-in gated clock conversion and a DesignWare compatible library enables ASIC code to be implemented into an FPGA without modification
  • Impulse Accelerated Technologies  (9)
    • Acceleration Station P-300L
      Desktop workstation for software application developers researching FPGA-based algorithm acceleration (+)

      Features:

      • Over 1.2 million programmable logic elements usable from C
      • Pico Computing EX-300 accelerator card
      • 16 Xilinx Spartan XC3S5000 FPGAs
    • Impulse CoDeveloper, Impulse C
      Enter device independent FPGA designs using ANSI C and compile into Altera or Xilinx (+)

      Features:

      • Work within Visual Studio, GCC, Eclipse, or other standard IDEs
      • Cab mix with VHDL code if desired
      • Identify hotspots for acceleration
    • FeedHandlingKit
      Feed Handling system which builds on COTS FPGA based hardware to accelerate processing speed while protecting your company's intellectual property (+)

      Features:

      • Acceleration – FPGA based hardware/software systems can accelerate some feed handling systems by 100x over pure microprocessor solutions
      • Protection of Intellectual Property – this methodology enables solution providers to offer the ability for end-users to insert custom functions, and to do so without accessing the IP provided by the solutions provider
      • Reusable, Retargetable and Portable – because the code remains in C and synthesizable VHDL it can be easily moved to improved hardware as newer platforms emerge
    • CoDeveloper for Virtex II Pro
      A C-to-FPGA, hardware/software co-design system for PowerPC-based Xilinx FPGAs (+)

      Features:

      • Allows users to describe, test, and compile C language applications, partitioning them between the Virtex II Pro's embedded PowerPC processor
      • Allows FPGA algorithms to be developed using popular C/C++ development environments, including Microsoft Visual Studio, Metrowerks CodeWarrior, and open-source GCC-based tools
      • Automates hardware/software interface creation and generates synthesizable HDL outputs compatible with popular FPGA synthesis and simulation tools [...]
    • Impulse CoDeveloper
      High-level FPGA design software (+)

      Features:

      • Allows C-language algorithms and applications to be compiled and optimized for use with FPGAs
      • By using Impulse C and the Impulse CoDeveloper C-to-FPGA tools, users have the power to accelerate C algorithms by orders of magnitude (as much as 300X) over equivalent embedded processor implementations
      • Enter designs in ANSI C
    • Impulse C-to-FPGA Tools
      Software-to-FPGA tools (+)

      Features:

      • Work with BlueCat Linux from LynuxWorks
      • Enable software developers to write C algorithms and refactor them for parallel processing on an FPGA
      • 10 – 100x performance increase in image, signal, and data processing algorithms
    • V5+C
      A kit that helps designers quickly hardware-accelerate DSP algorithms and rapidly prototype on an FPGA within an ANSI C environment (+)

      Features:

      33377.jpg
      • Uses a VMETRO Virtex-5 FPGA PMC-FPGA05 and an Impulse C-to-VHDL compiler
      • New designers don't need to be VHDL-literate, and experienced designers can work faster
      • Optimizes code to help “parallelize” DSP algorithms for FPGA use, resulting in up to 10x performance increase over pure CPU implementations
    • C to FPGA Video Kit
      Video Processing FPGA Developer's Kit for rapid design of medical, military, automotive, and consumer electronics video systems (+)

      Features:

      • C to FPGA compilation
      • Analysis of C for opportunities to accelerate code through increased parallelism, unrolling loops and adjusting stage delays
      • Machine-generated parallelism/optimization
    • FPGA Image Proc Lib
      FPGA image processing elements for developing custom advanced video and imaging systems includes a range of single-pixel and 2-dimensional operations. Integrates into Impulse C (+)

      Features:

      • C-callable functions as well as process-level filters that operate on streaming video data
      • Integrates directly into Impulse C
      • Compatible with Visual Studio, GCC, Eclipse and other popular environments
  • Curtiss-Wright  (15)
    • CHAMP-FX2
      The CHAMP-FX2 is Curtiss-Wright's next-generation FPGA-based computing platform utilizing a 6U VPX-REDI form factor (+)

      Features:

      • Two Xilinx Virtex-5 Platform FPGAs (LX110T, LX220T, or LX330T)
      • 512 Mbytes or 1 GB DDR2 SDRAM per FPGA in two banks (1-2 Gbyte total on-board), 4.4 GBytes/sec peak bandwidth per FPGA
      • 36 Mbytes QDR-II+ SRAM per FPGA in four banks (72 Mbytes total on-board), 8.8 GBytes/sec peak bandwidth per FPGA
    • FPE-320 3U VPX Processor Board
      The FPE320 is a 3U VPX FPGA processor board that incorporates the largest Xilinx Virtex-5 FPGAs available with an FPGA Mezzanine Card (FMC) site (+)

      Features:

      46493.jpg
      • Providing many resources in a small, rugged form factor, the FPE320 is the ideal FPGA platform for 3U systems that need to acquire analog and other high-speed I/O, or that need a large FPGA processor
      • At the heart of the FPE320's processing is a Xilinx Virtex-5 FF1738 package FPGA, the largest FPGA in the Virtex-5 family
      • FPGAs provide parallel processing capabilities that can be used to reduce processor count and system size
    • CHAMP-FX2 MPC8640 & Virtex-5 VPX Digital Signal Processor
      Two Xilinx Virtex-5 FPGAs (LX110T or LX220T) (+)

      Features:

      • 512 MB or 1 GB DDR2 SDRAM per FPGA in two banks (1-2 GB total onboard), 4.4 GBps peak bandwidth per FPGA
      • 36 MB QDR-II+ SRAM per FPGA in four banks (72 MB total onboard), 8.8 GBps peak bandwidth per FPGA
      • 1 GHz MPC8640D dual-core processor with 512 MB of DDR2 SDRAM in two banks
    • XF07-523 Kintex-7 FPGA XMC
      The XF07-523 provides direct FPGA driven LVDS I/O through the front panel and PMC/XMC connectors for rear I/O on a fully ruggedized XMC module designed to perform optimally in the harshest conditions including +85C card edge conduction-cooled solutions. This high performance module is ideal for use in a wide range of applications that require high-speed FPGA based digital I/O such as avionics, radar, digital imaging, and FPGA co-processor and other test equipment. (+)

      Features:

      212842378121582232.jpg
      • Based on Xilinx Kintex-7 325T (speed grade 2) FPGAs
      • High performance, high bandwidth LVDS digital I/O on front panel and rear IO
      • Dual x16 DDR3 memories for > 5 Gbytes/sec usable bandwidth
    • FPE650 FPGA VPX
      A quad FPGA processor card which combines high bandwidth I/O, achieved through VPX/VPX-REDI and FMC/VITA 57 sites (+)

      Features:

      36805.jpg
      • Designed for the most demanding digital signal processing applications such as electronic counter measures, signal intelligence, and electro-optics
      • Four Xilinx LXT, SXT, or FXT Virtex-5 FPGAs
      • 4x Xilinx Virtex-5 FPGAs (SX95T, LX155T, FX100T)
    • FPE320 3U Processor
      3U VPX FPGA processor board that incorporates the largest Xilinx Virtex-5 SXT, LXT or FXT FPGA available with an FMC mezzanine site (+)

      Features:

      39100.jpg
      • Supports Xilinx Virtex-5 SXT, LXT and FXT FPGAs
      • FMC (VITA 57) mezzanine site for I/O
      • DDR2 SDRAM and QDRII SRAM memory resources
    • CHAMP-FX2 VPX FPGA & MPC8641D Processor
      A 6U VPX-REDI/VPX/OpenVPX hybrid processor (+)

      Features:

      • Two Xilinx Virtex-5 LX110T/LX220T FPGAs
      • Freescale MPC8641/8641D processor @ 1.0 GHz
      • XMC site
    • VPX3-450
      The VPX3-450 combines the tremendous computing power of a Xilinx Virtex-5 FPGA with the high-performance floating-point capabilities of the Freescale 8640D dual-core PowerPC (+)

      Features:

      41193.jpg
      • One Xilinx Virtex-5 Platform FPGA (LX155T, or SX95T)
      • 512 MB DDR2 SDRAM attached to the FPGA, 2.2 GBps peak bandwidth
      • 18 Mbytes QDR-II+ SRAM attached to the FPGA in two banks, 4.4 GBps peak bandwidth per FPGA
    • XF07-516 Quad 250MSPS 16b XMC
      The XF07-516 is a rugged quad channel 250MSPS 16-bit digital receiver XMC. The ADC devices are controlled by a user programmable Xilinx FPGA which allows high performance processing such as Digital Down Conversion (DDC), filtering and custom algorithms. The XF07-516 Kintex-7 FPGA XMC is available in air and conduction-cooled build variants. The XF07-516 Kintex-7 FPGA XMC supports two banks of 128M x 16-bit DDR3 SDRAM, each directly connected to the FPGA. (+)

      Features:

      226606118407546982.jpg
      • 4 x 250 MSPS 16-bit Digital Receiver
      • XMC (x8 PCIe) module in air-cooled and conduction-cooled models
      • 80-250MHz external sample clock input (MMCX)
    • VPX3-530 3U VPX Virtex-7 FPGA Digital Receiver
      The VPX3-530 is a rugged dual channel 4GSPS ADC/DAC card with a user programmable Xilinx Virtex-7 FPGA in a 3U VPX ADC/DAC form factor. Providing two 4GSPS 12-bit (or four 2GSPS) analog inputs and two 5.6GSPS update rate (maximum 2.8GSPS data rate) 14-bit analog outputs with XC7V690T FPGA in air and conduction-cooled formats means that the VPX3-530 is ideal for a SWaP constrained range of defense applications such as Radar Warning Receivers (RWR), SIGINT and ECM applications. The VPX3-530 3U VPX Xilinx Virtex-7 FPGA ADC/DAC Card can be used in simple configurations alongside a Single Board Computer (SBC) or as part of a larger array of synchronized high speed analog I/O solutions. The VPX3-530 3U VPX Xilinx Virtex-7 FPGA ADC/DAC Card combines the I/O resources of the ADC, DACs, high-speed DDR3 SDRAM, high-speed PCI Express (PCIe) and serial links together with FPGA driven parallel IO to the OpenVPX backplane. FEATURES: Analog Inputs: 2x 4 GSPS or 4x 2 GSPS at 12-bit Analog Outputs: 2x 5.6GSPS update rate at 14-bit FPGA: Xilinx Virtex-7 VX690T, speed grade 2 Memory: 2x 2 or 4GB banks, 64-bit data per bank of DDR3L SDRAM OpenVPX Profile: MOD3-PAY-1D-16.2.6-2 and MOD3-PER-1F-16.3.2-2 [...] (+)

      Features:

    • VPX3-530 3U
      a rugged dual channel 4GSPS ADC/DAC packaged in the 3U form factor (+)

      Features:

      335355634751579790.jpg
      • the card is available in air- and conduction-cooled formats with a user-programmable Xilinx Virtex-7 FPGA
      • It provides two 4GSPS 12-bit (or four 2GSPS) analog inputs
      • two 5.6GSPS update rate (maximum 2.8GSPS data rate) 14-bit analog outputs with XC7V690T FPGA
    • VPX3-535 3U VPX ADC DAC 6 GSPS
      The VPX3-535 combines high-speed multi-channel analog IO, VITA 48.8 Air-Flow Through (AFT) technology, user programmable FPGA processing and local processing in a single 3U VPX slot for direct RF wideband processing to 6Gsps. This card allows for a high performance single slot transceiver with two 6Gsps 12bit channel, to over 6GHz instantaneous analog bandwidth, but can also scale to larger system with many channel. The architecture is optimized for RADAR, Electronic Warfare (EW), Signal Intelligence (SIGINT), Radar Warning Receivers (RWR) & Software Defined Radio (SDR). (+)

      Features:

      • 3U VPX ADC DAC Card with Xilinx UltraScale FPGA
      • 2x 6Gsps/12b analog inputs (or 4x 3Gsps/12b)
      • 2x 6Gsps/12b analog outputs
    • VPX3-450 MPC8640 & Virtex-5 VPX Digital Signal Processor
      One Xilinx Virtex-5 Platform FPGA (LX155T, or SX95T) (+)

      Features:

      42988.jpg
      • 256 MB DDR2 SDRAM attached to the FPGA, 2.2 GBps peak bandwidth
      • 18 MB QDR-II+ SRAM attached to the FPGA in two banks, 4.4 GBps peak bandwidth
      • 1 GHz Freescale MPC8640D dual-core processor with 1 GB of DDR2 SDRAM in two banks
    • PMC-FPGA05
      The PMC-FPGA05 is a Xilinx Virtex-5 XC5VLX110 platform FPGA based, PMC module with high- speed digital I/O and PCI-X interface to the host computer (+)

      Features:

      30636.jpg
      • The PMC-FPGA05 is aimed at embedded application development
      • Xilinx Virtex-5 LX110 FPGA
      • Multiple banks of SRAM for DSP
    • VPX3-534 3U VPX 6GSPS Tranceiver Card
      The VPX3-534 combines high-speed multi-channel analog IO, user programmable FPGA processing and local processing in a single 3U VPX slot for direct RF wideband processing to 6 Gsps. This card allows for a high performance single slot transceiver with two 6 Gsps 12bit channel, to over 6 GHz instantaneous analog bandwidth, but can also scale to larger system with many channel. The architecture is optimized for RADAR, Electronic Warfare (EW), Signal Intelligence (SIGINT), Radar Warning Receivers (RWR) and Software Defined Radio (SDR) applications. (+)

      Features:

      3928024634057507215.jpg
      • 3U VPX Analog I/O card with 2x 6Gsps/12b analog inputs (or 4x 3Gsps/12b)
      • Xilinx KU115 UltraScale user programmable FPGA
      • Xilinx ZU4 UltraScale+ Zynq
  • Traquair Data Systems, Inc.  (7)
    • ORS-11x
      Multi-channel analog interfaces with a user-programmable Spartan-IIE or Virtex-II FPGA, providing developers with the means to implement FPGA-based digital signal processing solutions (+)

      Features:

      31753.jpg
      • Can be used as stand-alone devices with the user-programmable FPGA responsible for supporting all signal processing functionality, or as daughtercards to micro-line DSP/FPGA boards
      • A variety of multi-channel A/D/A configurations are supported: 2-channel 14-bit A/D/A with ADC sample rates up to 65 MSps; 4-channel 16-bit A/D/A with ADC sample rates up to 2.5 MSps; 12-channel A/D/A with ADC sample rates up to 250 KSps
      • If the capabilities of a Texas Instruments TMS320C6000 DSP processor are required, an ORS-11x board can be fitted as a daughtercard to a TMS320C6000-based micro-line embedded DSP/FPGA board
    • ultra-compact
      The ultra-compact UC1394a-1 and UC1394a-3 multi-chip modules provide Texas Instruments TMS320C5000 DSP, Spartan-II or Spartan-3 FPGA, and ready-to-use IEEE1394a FireWire communication capabilities in tiny 30 mm x 36 mm surface-mount PLCC packages (+)

      Features:

      31752.jpg
      • They are suitable as user-programmable DSP/FPGA resources or as FireWire connectivity devices
      • The UC1394a-1 incorporates a TMS320C5509 integer DSP, a 50 kGate Spartan-II FPGA, 8 MB of SDRAM
      • In addition to the I/O capabilities of the UC1394a-3, the UC1394a-1 provides external access to USB and four A/D inputs provided by the TMS320C5509 DSP processor
    • micro-line ORS-1xx
      micro-line compatible analog I/O & FPGA boards (+)

      Features:

      19216.jpg
      • Multichannel 12/14/16-bit A/D/A capabilities
      • User programmable Spartan-IIE or Virtex-II FPGA
      • Used as peripheral to DSP or as standalone device
    • C6317Compact
      A DSP board with onboard FPGA (+)

      Features:

      • Texas Instruments TMS320C6713 floating-point DSP processor at 225 MHz (up to 1800 MIPS or 1350 MFLOPS)
      • Virtex-II FPGA (250k, 500k, or 1M gates)
      • Dual 400 Mbits/sec IEEE 1394 FireWire ports
    • micro-line C6713CPU
      High-quality, single-board solution for applications requiring an embedded DSP and optionally programmable FPGA (+)

      Features:

      • Texas Instruments TMS320C6713 DSP
      • 64 MB of SDRAM (128 MB SDRAM available on request), 2 MB flash ROM
      • Optionally programmable Spartan-3 FPGA (up to 1 M gate density)
    • micro-line C6713 Compact
      Standalone and embeddable DSP/FPGA board (+)

      Features:

      • Texas Instruments TMS320C6713 floating point DSP
      • 250 k, 500 k, or 1 M-gate complexity Virtex-II FPGA
      • 400 Mbps IEEE 1394a FireWire interface
    • Micro-line C6713Compact
      Standalone and embedded-capable DSP/FPGA board (+)

      Features:

      19182.jpg
      • Texas Instruments TMS320C6713 floating point DSP Processor
      • 250k, 500, or 1M-gate complexity Virtex-II FPGA
      • 400 MBps IEEE 1394 FireWire interface
  • GateRocket, Inc.  (1)
    • RocketDrive
      RocketDrive is a Device Native FPGA verification system that provides a dramatic increase in FPGA verification accuracy,throughput and debugging productivity (+)

      Features:

      42692.jpg
      • Replaces RTL and gate-level simulation models with actual FPGA hardware for Device Native simulation
      • Accelerates verification throughput by up to 10x or more over RTL simulation
      • Identifies problems with IP blocks, pin-outs and tool chain anomalies that are missed in normal simulation
  • CommAgility  (6)
    • AMC-V7-2C6678
      The AMC-V7-2C6678 is a high performance DSP/FPGA card. It is powered by the latest Texas Instruments TMS320C6678 multicore DSPs plus a Xilinx Virtex-7 FPGA. The module also provides fast, flexible I/O including Serial RapidIO (SRIO), Gigabit Ethernet and PCI Express. It is ideal for a range of high performance DSP/FPGA processing applications including telecoms and image processing. The AMC-V7-2C6678 includes a high density XC7VX415T-2 Virtex-7 FPGA as standard, with other FPGA options available on request. Virtex-7 FPGAs provide high DSP performance and I/O bandwidth, with best-in-class total power consumption that is 50% less than the previous generation. The board includes a single front panel SFP+ optical interface that links directly to the FPGA, plus a single mini-SAS connector linked to the SRIO switch. Should applications require timing and synchronisation, this is achieved via the front panel or backplane clock I/O, enabling the module to sync easily to other equipment. Should modifications be required to make this product fit your OEM requirements, CommAgility can support your needs through customisation or providing additional software and firmware FEATURES: 2 Texas Instruments TMS320C6678 DSPs each with 8 1.25GHz C66x cores Xilinx Virtex-7 VX415T FPGA Front panel SFP+ socket connected directly to FPGA Front panel mini-SAS connector with 25 Gbaud SRIO from on-board switch Gen2 RapidIO infrastructure between DSPs, FPGA, front panel and AMC.4 Full Gigabit Ethernet infrastructure Single width, full-size AMC card [...] (+)

      Features:

    • AMC-D1F1-1200
      An AdvancedMC module that offers a compact, high-performance DSP/FPGA signal processing solution for AdvancedTCA and MicroTCA systems (+)

      Features:

      36707.jpg
      • Texas Instruments TMS320C6455 digital signal processor running at 1.2 GHz and a Virtex-4 FX100 FPGA from Xilinx
      • Optimized for applications requiring high-end signal I/O bandwidth in a compact mid-height AMC form factor, such as wireless baseband, image processing, defense, and aerospace
      • Provides a combination of DSP and FPGA resources, with fast and flexible links to external data and over 256 MB of onboard memory
    • AMC-2C6678
      The AMC-2C6678 is a high performance signal processing AMC card with 16 DSP cores and FPGA resources. It is powered by the latest Texas Instruments TMS320C6678 DSPs plus a Xilinx Virtex-6 FPGA. It is ideal for a range of high performance DSP/FPGA processing appli-cations including telecoms and image processing. An IDT CPS-1848 Gen2 SRIO switch provides a 20Gbps per port Serial RapidIO infrastructure. Now with 1.2GHz DSPs each with 1GB SDRAM. (+)

      Features:

      182331908939722149.jpg
      • [...]
    • AMC-V7
      The AMC-V7 is a high performance FPGA-based interface and processing module for wireless baseband applications. It is a single width, mid-size Advanced Mezzanine Card form factor. The module is ideal for LTE wireless front-end applications requiring multiple CPRI links at up to rate option 8 (20x, 10.138Gbps line rate) and is also suitable for any FPGA processing application, especially where optical interfacing or SRIO support is required. FEATURES: Xilinx Virtex-7 FPGA, either VX415T-2 or VX690T-2 option Three SFP+ sockets to support a CPRI or OBSAI antenna interface 20gbps Gen2 RapidIO infrastructure from FPGA to AMC.4 backplane and front panel Full Gigabit Ethernet infrastructure Versatile clock generation, recovery & distribution Single width, full-size AMC card - mid-size form optionally available. [...] (+)

      Features:

    • AMC-V6L
      The AMC-V6L is a competitively priced high performance FPGA-based interface and processing module. It is a single width, mid-size Advanced Mezzanine Card form factor. The module is ideal for a wide range of applications including wireless, general-purpose FPGA acceleration and I/O processing. (+)

      Features:

      203499510941290967.jpg
      • Xilinx Virtex-6 FPGA, either LX75T-2 or LX240T
      • DDR3 SDRAM
      • Two SFP+ sockets to support a CPRI or OBSAI antenna interface
    • AMC-V6
      AMC-V6 FPGA AMC card for wireless baseband solutions including WiMAX and LTE (+)

      Features:

      46682.jpg
      • Xilinx Virtex-6 FPGA, either LX240T or LX550T
      • Three SFP+ sockets to support a CPRI or OBSAI antenna interface
      • 20 Gbps Gen2 RapidIO infrastructure from FPGA to AMC.4 backplane and front panel
  • Creative Electronic Systems  (8)
    • GPIO-8439
      The latest family of CES general-purpose user-programmable I/Os (GPIO) is based on PMCs or XMCs, which are equipped with large FPGAs (+)

      Features:

      45644.jpg
      • The main feature of these boards is the Xilinx Virtex-6 FPGA, which is connected to the PCI and CES high-speed serial links, as well as with all required external memory sub-systems, including an ultra-high-speed staging buffer
      • CES GPIOs can be integrated on CES VPX, VME or CompactPCI processor boards, creating a very powerful user-programmable assembly
      • CES provides a complete FPGA programming environment, which allows users to develop their own applications and to interconnect with all of the hardware functionalities of CES boards
    • RIO4 8076
      Single or dual computing node, each node equipped with: PowerPC G4 at maximum available frequency; Virtex-II Pro FPGA with a private ultra-high-speed SSRAM; high-speed communication channels (+)

      Features:

      • Two Gigabit Ethernet channels
      • One PMC site with a RocketIO interface
      • VME64x 2eSST and two separate PCIs (local/P0) for transparent multiprocessor extension
    • RIO4 8076
      Single or dual computing node, each node equipped with: PowerPC G4 at maximum available frequency; Virtex-II Pro FPGA with a private ultra-high-speed SSRAM; high-speed communication channels (+)

      Features:

      • Two Gigabit Ethernet channels
      • One PMC site with a RocketIO interface
      • VME64x 2eSST and two separate PCIs (local/P0) for transparent multiprocessor extension
    • MFCC 8446
      Intelligent interface in a PMC form factor (CCPMC compliant) (+)

      Features:

      • Contains all of the required elements for ultra high-speed acquisition and processing applications
      • PowerPC 750CXe at up to 600 MHz with 256 KB internal L2 cache at full CPU speed
      • User-programmable, front-end,acquisition, low-power Xilinx VirtexE 400 KGates FPGA
    • RIO4 8070/RIO4 8076
      Single or dual computing node (+)

      Features:

      24232.jpg
      • Each node equipped with a PowerPC G4 at maximum available frequency, and a Virtex-II Pro FPGA with private ultra-high-speed SSRAM
      • Two Gigabit Ethernet interfaces
      • Two PMC sites with RocketIO interface
    • GPIO 8405
      A general purpose I/O PMC mezzanine (+)

      Features:

      • Application-specific FPGA
      • Electrical adaptation logic area
      • 64 I/O + 4 handshake from the panel and 64 I/O from P2
    • GPIO-E 8405
      A general purpose I/O PMC mezzanine (+)

      Features:

      • Application-specific FPGA
      • Electrical adaptation logic area
      • 64 I/O + 4 handshake from the panel and 64 I/O from P2
    • GPIO-8439
      User-Programmable I/O PMC / XMC (+)

      Features:

      46708.jpg
      • PMC (with XMC connector) or XMC (VITA 42)
      • Xilinx Virtex-6 LX130T / LX195T / LX240T / LX365T / SX315T / SX475T FPGA
      • One PCIe x8 on primary XMC
  • Altium Limited  (4)
    • Protel
      A complete board-level and FPGA-level design solution in a single application (+)

      Features:

      • Fully supports the design of FPGAs and their integration onto the PCB
      • Based on LiveDesign-enabled DXP platform to provide seamless integration with other Altium design systems
      • Hierarchical, multi-channel schematic editing environment
    • Nexar
      A comprehensive, vendor-independent electronic design solution for building complete processor-based digital systems based on FPGAs, using existing board-level design methodologies (+)

      Features:

      • Integrated hardware and software development tools, including soft IP cores and a LiveDesign-enabled development board
      • FPGA vendor-independent design
      • No HDLs required
    • NanoBoard NB1
      An FPGA-based, nano-level breadboard (+)

      Features:

      • LiveDesign-enabled development board
      • Fully compatible with Altium's LiveDesign-enabled tools
      • Allows rapid and interactive implementation and debugging of FPGA designs
    • Altium Designer with Desktop NanoBoard NB2
      Desktop NanoBoard NB2 features include: application-specific plug-in peripheral boards, high-speed PC interconnection through USB 2.0, plug-in daughter boards to target a wide range of FPGA and processor devices, integrated color TFT touch screen, and built-in, high-quality audio sub-system (+)

      Features:

      • The Innovation Station includes: Altium Designer 12 month time-based core license + Desktop NanoBoard NB2
      • Choice of Altera Cyclone II, Lattice ECP, or Xilinx Spartan-3 FPGA [...]
  • First Silicon Solutions FS2  (2)
    • FPGAView for TLAs
      PC Windows-based program designed for use with Tektronix Logic Analyzers (+)

      Features:

      31713.jpg
      • Enables real-time debugging of Altera and Xilinx FPGAs
      • Design engineers can measure signals inside their FPGA design and select which group of internal signals to probe without having to recompile their design
      • Simplifies logic analyzer use by automatically updating channel names with the internal signal names selected and providing a mechanism to auto-select channel groupings from the same selection
    • Logic Navigator
      On-chip instrumentation trace and debug tool that provides logic analysis capability to Actel FPGA internal logic (+)

      Features:

      • OCI technology for trace and triggering on signals in Actel FPGA devices
      • User configurable logic analysis of any nodes within the Actel ProASIC, ProASIC(PLUS), MX, SX, and AX devices
      • Supports level or edge/level triggering conditions
  • CSP Inc. (CSPI) MultiComputer Division  (3)
    • FastCluster XL-Gate
      The XL-Gate provides a Hybrid Computing Solution delivering the acceleration of Virtex-5 FPGAs and the optimized performance/power ratio of a MPC8641 General Purpose Processor (+)

      Features:

      43508.jpg
      • The reconfigurable XL-Gate FPGA payload supports Xilinx Virtex-5 LXT or SXT FPGA's (on an XMC Module)
      • FPGA development is simplified by the use of the CoreFire Design Suite, turning high-level data flow concepts into algorithms programmed for the XL-Gate FPGA board
      • Available in air-cooled or conduction cooled versions
    • 3000 SERIES
      A series of VXS systems that support multicore, FPGA, and 10 GbE interoperability while delivering a 5x performance increase in bisection bandwidth over the previous generation (+)

      Features:

      32170.jpg
      • Rugged, high-performance scalable embedded cluster with general purpose processors, reconfigurable FPGAs, and high-speed interconnect on VXS
      • VXS switch with Myri-10G Clustering Technology and 10 GbE compatibility
      • VXS payload with Freescale multicore PowerPC AltiVec
    • FPGA Development Platform
      The CSPI FPGA Development Platform includes advanced tools needed to accelerate the design, build, and test phase of your DSP application for the FastCluster Run-time Platform (+)

      Features:

      43507.jpg
      • The FPGA Development Platform for FastCluster supports a Virtex-5 FPGA XMC development board, Java SE Development Kit, Xilinx ISE, Microsoft Visual Studio and the CoreFire Design Suite
      • The FastCluster FPGA Run-time Platform includes an FPGA payload, drivers, library, Board Support Package, and Debugger Agent
      • Development and Run-Time Platforms use the same FPGA (Xilinx Virtex-5) XMC modules [...]
  • Nallatech  (15 of 29)
    • Benera
      CompactPCI DIME-II motherboard with Xilinx Virtex FPGAs (+)

      Features:

      • 64-bit/33MHz PCI interface
      • PCI master DMA engine capable of 266 Mbytes/sec PCI burst transfers
      • Four DIME-II module slots
    • Benadic
      A CompactPCI 14-bit ADC motherboard (+)

      Features:

      • Operates at 80 Mbytes/sec with 250Mhz bandwidth for high-performance applications
      • 20 channels integrated into a Xilinx FPGA network
      • Each of the 20 ADCs supports either single-ended or differential analog input. Each FPGA contains a 128Mbyte bank of SDRAM that allows storage of digitized data from each of the ADCs
    • VXS-620 FPGA
      FPGA and PowerPC VXS multiprocessor (+)

      Features:

      42875.jpg
      • Designed to meet the signal processing needs of modern signal intelligence, software defined radio, and radar applications
      • The VXS-620 is the latest product to be introduced to the highly successful Nallatech REVX Series of rugged embedded processing solutions
      • The VXS-620 features an onboard Xilinx Virtex-5 FPGA for the implementation of high performance DSP applications
    • BenONE-PCI-104
      FPGA processing capability in PCI-104 form factor (+)

      Features:

      • Access to Nallatech's full range of DIME-II FPGA modules for FPGA processing, memory, and analog and digital I/O
      • Supporting Xilinx Virtex-4, Virtex-II Pro and Virtex-II FPGAs through the DIME-II module range
      • Includes embedded PCI interface for communicating with host SBC
    • BenDATA-II
      Combines the Virtex-II Pro FPGA from Xilinx with the flexibility of both onboard SRAM and DDR SDRAM (+)

      Features:

      • High bandwidth off-module communication is provided through the multi-Gbps bandwidth of the DIME-II motherboard connections in addition to eight Rocket I/O connections
      • Suitable for high-performance FPGA computing applications
      • The Virtex-II Pro FPGA on the BenDATA-II is offered from 2VP70 to 2VP125
    • BenNUEY-PCI-104-V4
      PCI-104 FPGA Computing Processor Card (+)

      Features:

      31729.jpg
      • FPGA computing stack that provides a powerful platform for high-performance embedded systems development and deployment in production environments across a variety of applications including signals intelligence, avionics, Software Defined Radio, and autonomous vehicles
      • This solution is suitable for SWAP constrained real time embedded applications
      • An on-board Virtex-4 FX FPGA provides the ideal balance of resources for processing and system management, whilst three DIME-II expansion slots allow users to optimize system resources to meet processing, memory, and I/O requirements
    • BenNUEY-VME64-VXS
      6U VME64-VXS FPGA Computing Card (+)

      Features:

      • Provides a powerful platform for high-performance systems development and deployment in production environments
      • Using DIME-II expansion modules, the BenNUEY-VME64-VXS can support multiple analog and digital I/O interfaces, memory types, and up to seven user FPGAs on a single PCI card
      • Can be combined with DIMEtalk for easy connectivity implementation and FUSE for host integration [...]
    • BenBLUE-V4
      Dual Virtex-4 and SRAM module (+)

      Features:

      • Two onboard Xilinx Virtex-4 User FPGAs
      • Two Virtex-4 LX100 or LX160
      • Up to 300k+ logic cells per module
    • FPGA Accelerated Compute Node
      The Nallatech® FPGA Accelerated Compute Node® allows you to drive the most demanding HPC, data visualization and rendering workloads with a flexible, extremely dense 1U rack server optimized for accelerators. (+)

      Features:

      333267492491112286.jpg
      • High Density 1U Rack Server with (2) Intel Xeon Processors
      • (4) Nallatech 510T Cards with (8) Latest- Generation Altera / Intel Arria 10 FPGAs
      • OpenCL Programming Support
    • BenNUEY-VME
      Based on Xilinx Virtex-II Pro field programmable gate arrays (FPGAs) (+)

      Features:

      • Dedicated PowerPC processor units and increased memory
      • Makes full use of the Virtex-II Pro
      • Support for Gbit Ethernet, Infiniband and Fibrechannel, plus others through two SFP modules on the front-panel interfacing directly to the Virtex-II Pro
    • AMC-4120
      The AMC-420â„¢ FPGA processing module is designed to meet the processing needs of high-performance applications in the telecommunications & networking, video processing and defense markets. A Xilinx Virtex-6 FPGA enables high performance processing applications to be implemented with low levels of power consumption. Application specific I/O can be added to the AMC-420 via the on-board FMC site. (+)

      Features:

      193925194184183131.jpg
      • Mid/Full size AMC designed to PICMG® AMC.0 R2.0
      • Xilinx Virtex-6 FPGA – LX240T, LX365T, LX550T, SX315T, SX475T devices supported
      • Flexible FPGA Memory Options with up to 1GB DDR3 SDRAM and up to 36MB QDR-II+ SRAM
    • BenIO-V4
      Virtex-4, SRAM, and digital I/O module (+)

      Features:

      31730.jpg
      • Suitable for applications requiring the capability of high bandwidth, high speed external digital I/O, and SRAM memory combined with the latest FPGA technology
      • Combines a Xilinx Virtex-4 SX or LX FPGA, 116 MB of DDR-II SRAM, and up to 152 digital I/O lines
      • Provides I/O, processing and memory expansion capability for the Nallatech CompactPCI, VME, PCI, and PCI-104 COTS FPGA computing systems
    • xmc-240
      The XMC-240 features four channels of analog input that can sample analog signals at up to 250 MSPS with 14 bit resolution (+)

      Features:

      • These are coupled directly to a Xilinx Virtex-5 SX95T FPGA for the implementation of high-performance DSP applications to process the data captured from the A/D converters
      • The XMC-240 has comprehensive clock management capabilities and offers either on-board clocking or external clock input
      • Supported by comprehensive Development Kits for both Linux and Wind River Vx Works
    • BenADDA-16™
      Single-width PMC/XMC mezzanine (+)

      Features:

      • Xilinx Virtex-5 LX155T or SX95T FPGA
      • Two banks 256 MB DDR2 SDRAM
      • PCI-X 133 PMC interface
    • BenONE-PCIe
      8-lane PCI-Express (+)

      Features:

      34491.jpg
      • Xilinx Virtex-5 PCI-Express interface FPGA
      • DIME-II FPGA module expansion slot
      • Multiple off-card I/O headers
  • Acromag, Inc.  (15 of 32)
    • VPX cards w/ config. Spartan-6/VIrtex-5
      3U VPX FPGA boards (+)

      Features:

      • Provide powerful and cost-effective solutions for high-speed processing of complex algorithms in embedded computing applications
      • Offers a choice of logic-optimized Xilinx Virtex-5 FPGAs while the VPX-SLX version employs a Spartan-6 FPGA with 150k logic cells. Virtex-5 FPGA cards deliver maximum computing performance
      • Spartan-6 FPGA cards are designed for cost-sensitive mid-level applications
    • PMC-DX500/DX2000
      A line of reconfigurable FPGA PMC I/O modules (+)

      Features:

      17410.jpg
      • Cost/performance mix suitable for mid-level computing functions
      • Xilinx Virtex-II FPGAs with 500K (PMC-DX500) and 2M (PMC-DX2000) system gates
      • Up to 1 Mb of on-chip memory and 9 Mb of onboard SRAM
    • IP-EP200
      An industry pack digital I/O module (+)

      Features:

      32500.jpg
      • Implements a user-configurable Altera Cyclone II EP2C20 FPGA
      • Four models available: IP-EP201: 48 TTL I/O lines; IP-EP202: 24 differential RS485 I/O lines; IP-EP203: 24 TTL and 12 RS-485 I/O lines; IP-EP204: 24 LVDS I/O lines
      • FPGA programmable via JTAG port or IP bus
    • VPX-SXL
      User-Configurable Spartan-6 FPGA Modules with Plug-In I/O (+)

      Features:

      52523.jpg
      • User-configurable Xilinx® Spartan®-6 FPGA enhanced with high-speed memory and a high-throughput PCIe interface
      • Reconfigurable Xilinx Spartan-6 FPGA with 147,433k logic cells
      • PCIe bus 4-lane Gen 1 interface
    • IP-EP200 FPGA I/O
      Industry Pack digital I/O module with user-configurable Altera Cyclone II FPGA (+)

      Features:

      34855.jpg
      • Allows users to download custom instruction sets into the FPGA for adaptive computing applications
      • User-configurable Altera Cyclone II EP2C20 FPGA
      • Four models with 48 TTL I/O, 24 diff RS-485 I/O, 24 TTL and 12 RS-485 I/O, or 24 LVDS I/O
    • PMC-SLX
      Acromag’s cost-effective PMC-SLX modules feature a user-configurable Xilinx Spartan-6 FPGA enhanced with high-speed memory and a high-throughput PCI-X interface. (+)

      Features:

      183567802751472282.jpg
      • PMC Mezzanine Module
      • Reconfigurable Spartan-6 FPGA with 147,433 logic cells
      • PCI-X bus 100MHz 64-bit interface
    • PMC-LX/SX
      New PMC modules combine the power of a configurable Virtex-4 FPGA with interchangeable digital I/O front ends (+)

      Features:

      32206.jpg
      • Customizable FPGA with up to 60 K logic cells and 192 XtremeDSP slices
      • Supports both front and rear I/O
      • Plug-in I/O modules available for front mezzanine
    • VPX-VLX
      Acromag's new VPX FPGA boards deliver maximum performance for accelerated algorithm processing or execution of complex logic routines in embedded computer systems (+)

      Features:

      47802.jpg
      • Reconfigurable Xilinx Virtex-5 FPGA
      • PCIe bus 4-lane Gen 1 interface
      • Supports both front and rear I/O connections
    • VPX-VLX
      Acromag's new VPX FPGA boards deliver maximum performance for accelerated algorithm processing or execution of complex logic routines in embedded computer systems (+)

      Features:

      47802.jpg
      • Reconfigurable Xilinx Virtex-5 FPGA
      • PCIe bus 4-lane Gen 1 interface
      • Supports both front and rear I/O connections
    • PMC-SLX
      PMC-SLX modules have user-configurable Xilinx Spartan-6 FPGA enhanced with high-speed memory and high-throughput PCI-X interface. Field I/O interfaces via front or rear connectors. (+)

      Features:

      184241139751472282.jpg
      • PMC Mezzanine Module
      • Reconfigurable Spartan-6 FPGA with 147,433 logic cells
      • PCI-X bus 100MHz 64-bit interface
    • XMC-SLX
      User-configurable Xilinx Spartan-6 FPGA and plug-in I/O enhanced with high-speed memory and a high-throughput PCIe interface (+)

      Features:

      • Reconfigurable Spartan-6 FPGA with 147,433 logic cells
      • PCIe bus 4-lane Gen 1 interface
      • 256k x 64-bit dual-port SRAM provides direct link from PCIe bus and to FPGA (optional 1M x 64-bit)
    • XMC-SLX
      User-configurable Xilinx Spartan-6 FPGA and plug-in I/O enhanced with high-speed memory and a high-throughput PCIe interface (+)

      Features:

      • Reconfigurable Spartan-6 FPGA with 147,433 logic cells
      • PCIe bus 4-lane Gen 1 interface
      • 256k x 64-bit dual-port SRAM provides direct link from PCIe bus and to FPGA (optional 1M x 64-bit)
    • PMC Virtex-5 FPGA I/O with PowerPC
      User-configurable Xilinx Virtex-5 FPGA with embedded PowerPC (+)

      Features:

      • XC5VFX70T FPGA provides 70K logic cells and 128 DSP48E slices
      • FPGA has embedded PowerPC 440 processor block
      • Supports front I/O (via extension modules) and rear I/O (internal)
    • PMC-LX40/LX60
      User-configurable Virtex-4 FPGA modules with plug-in I/O (+)

      Features:

      • Customizable FPGA (Xilinx Virtex-4 XC4VLX40/60) with up to 60 K logic cells and 64 XtremeDSPTM slices
      • Supports both front and rear I/O
      • Plug-in I/O modules are available for front mezzanine
    • PMC-SX35
      User-configurable Virtex-4 FPGA module with plug-in I/O (+)

      Features:

      • Customizable FPGA (Xilinx Virtex-4 XC4VSX35) withup to 34 K logic cells and 192 XtremeDSP slices
      • Supports both front and rear I/O
      • Plug-in I/O modules are available for front mezzanine
  • Parsec  (4)
    • PM431
      A PMC module that employs FPGA technology to provide a high bandwidth processing platform targeted at typical Radar/Video functions such as FFT, FIR filters, and convolution (+)

      Features:

      41445.jpg
      • FPGAs: High speed DSP processing in ALTERA Stratix FPGA; EP1S25C6 Processing FPGA (standard) to EP1S40 ; onboard non-volatile storage of FPGA configuration data; Two banks of Processing FPGA configuration data provided; automatic configuration of FPGAs after power-up
      • Memory: standard: 5 x 256K x 36 ZBT memories (5 MB); Optional: 5 x 512K x 36 ZBT memories (10 MB)
      • PCI Interface:
    • PM430: Dual FPGA PMC
      Two Altera Stratix EP1S25 processing FPGAs, upgradable to EP1S40 devices (+)

      Features:

      20531.jpg
      • Two 32/64-bit 33/66MHz PCI-to-local-bus bridges supporting target read/write and DMA transactions
      • Separate target and DMA buses provide simultaneous data transfer in both directions
      • Single PMC version with one processing FPGA also available, such as PM431
    • PM488: Dual DAC PMC
      Two Analog Devices AD9772A 150MSPS 14-bit DAC converters (+)

      Features:

      20533.jpg
      • SNR of 71dB @ 25MHz and SFDR of 80dB @ 5MHz
      • 50 Ohm AC coupled analog outputs with 67.5MHz reconstruction pass band
      • 32/64-bit 33/66MHz 3.3V PCI interface implemented in Altera Stratix FPGA
    • PM480: Dual ADC PMC
      Two Analog Devices AD6645 105MSPS 14-bit ADCs (+)

      Features:

      20532.jpg
      • SNR of 75dB @ 15 MHz and SFDR of 89dBc @ 70 MHz
      • 50 Ohm AC coupled 100 kHz – 250 MHz analog inputs
      • 32/64-bit 33/66 MHz 3.3 V PCI interface implemented in Altera Stratix FPGA
  • QinetiQ  (9)
    • Quixilica Callisto VXS-1
      High performance FPGA Based Communications management and processing platform (+)

      Features:

      • Fits in Switch card position in a VXS (VITA41.0) backplane
      • Supports 4X, full Duplex 3.125 GBps high speed serial links to up to sixteen VXS Payload slots
      • Front panel breakout of up to twelve 2.5 GBps links through fibre or copper SFP Transceivers
    • Quixilica Janus VXS-1
      10 Channel 160/400 MSPS Digital to Analog Converter and Xilinx Virtex-II Pro FPGA Processing Engine (+)

      Features:

      • 10 Channel DAC using 5x 16 bit Dual Channel 200 Msps AD9777 TxDAC
      • Xilinx XC2VP70 FPGA
      • VME/VXS form factor, VITA 41.0 Compliant, 8x 3.125 Gbps serial I/O links
    • Quixilica Venus VXS-1
      6U VXS card combines five high-resolution analog-to-digital channels with FPGA-based signal processing (+)

      Features:

      • 5x 14 bit 105 Msps AD6645 digitizers
      • Xilinx XC2VP70 FPGA
      • VME/VXS form factor
    • Quixilica Neptune VXS-1
      2 Channel 2 GSPS Digitizer and Xilinx Virtex-II Pro FPGA Processing Engine (+)

      Features:

      20083.jpg
      • 2x 10bit 2Gsps Atmel ADC / DMUX
      • Xilinx XC2VP70 FPGA
      • VME/VXS form factor, VITA 41.0 Compliant, 8x 3.125 Gbps serial I/O links
    • Quixilica Mars VXS-1
      2 Channel 400MSPS Digitiser and Xilinx Virtex-II Pro FPGA Processing Engine (+)

      Features:

      • 2x 12bit 400 Msps Analog Devices AD 12400 ADC
      • Xilinx XC2VP70 FPGA
      • VME/VXS form factor, VITA 41.0 Compliant, 8x 3.125 Gbps serial I/O links
    • Quixilica Triton VXS-1
      Single Channel, 2 GSPS ADC/DAC and Xilinx Virtex-II Pro FPGA Processing Engine (+)

      Features:

      • 1x 10bit 2 Gsps Atmel ADC / DMUX
      • 1x 12 bit 2 Gsps Euvis MUX/DAC
      • Xilinx XC2VP70 FPGA
    • Quixilica Venus VXS-1 Plus
      5x 14 bit 125 Msps TI ADS5500 Digitisers (+)

      Features:

      • Xilinx XC2VP70 FPGA
      • VME/VXS form factor, VITA 41.0 Compliant, 8x 3.125 Gbps serial I/O links
      • 2x Front Panel SFP slots for 2.5Gbps fibre or copper transceivers
    • Quixilica Floating Point FPGA Cores
      IEEE-754 compliant variable wordlength floating point artithmetic cores for Xilinx Virtex, Virtex E, and Virtex-II FPGA families (+)

      Features:

      • Includes IEEE-754 single and double precision wordlengths
      • Fully piplelined architecture
      • Supports Virtex, Virtex-E, and Virtex-II FPGA families
    • Quixilica Programmable Digital Radar Receiver
      Software programmable multi-channel digital radar receiver for Xilinx Virtex-II and Virtex-II PRO FPGA families (+)

      Features:

      • Programmble Quixilica FIR Filter Modules provide flexible filter chain
      • Optional Digital Down Conversion from fs/4 to baseband
      • Software programmable for filter configuration
  • Mercury Systems  (15)
    • ECDR-4-14105
      Four A/D converters (14-bit at 105 MHz sampling rate); each followed by an Altera Stratix FPGA with custom IP to implement a wide band receiver and FFT engine (+)

      Features:

      • Two large user-programmable Xilinx Virtex-II Pro FPGAs each with a total of 512 MByte DDR SDRAM. These FPGAs connect directly to each other through four LVDS data links that each provide 622 MBytes/second throughput
      • The FPGA resources are also available to implement custom processing functions (beamforming, direction-finding, etc.) according to user specifications
      • One control/output FPGA with associated 256 MByte DDR SDRAM which outputs data to the appropriate data bus, dual RACE++, serial Rapid I/O, or other Vita 41-defined protocol
    • Echotek Series SCFE-V5-VXS
      The Echotek Series SCFE-V5-VXS Virtex-5 FPGA-Based Processing Engine provides high-performance processing for applications requiring extreme FPGA processing power (+)

      Features:

      42271.jpg
      • Utilizing the largest FPGAs available from Xilinx, the SCFE-V5-VXS solves the toughest computing problems in a cost-effective form factor
      • The other interfaces on the card, including the QSFP fiber transceivers, and the FMC mezzanine sites, combine with the FPGA processing power to create an interoperable, upgradeable solution for a vast number of platform configurations
      • Three Xilinx Virtex-5 SX240T or LX330T FPGAs in 1,738 pin-package with up to 3,168 raw DSP48e slices
    • Echotek Series ECV4-4
      The Echotek Series ECV4-4 family of digital receivers implements a flexible baseboard plus mezzanine architecture while supporting an extremely high density of FPGA-processing power (+)

      Features:

      • This combination of flexibility and power allows the family to deliver unique capabilities, such as multi-board coherency, while addressing a range of analog signal requirements
      • Seven user-programmable Virtex-4 FPGAs plus one Stratix FPGA
      • Multiple backplane interfaces for VXS, RACE++, and VME64x
    • RACE++ FPGA Compute Nodes
      FPGA compute nodes fully integrated into a RACE++ VME system (+)

      Features:

      • Easy application partitioning between FPGAs and PowerPCs
      • Off-the-shelf IP Provides RACE++ and memory interfaces
      • FPGA Developer's Kit (FDK) simplifies FPGA code development
    • Echotek Series ECV4-2
      The ECV4-2, with input clock capability up to 1.5 GHz, is the highest performing digital receiver in an XMC form factor in the industry (+)

      Features:

      • Echotek Series products lead the mixed-signal industry in extracting clear signals from electronic clutter, forming a bridge between the realms of analog signals and digital processing. After an analog signal is received by an antennae or other sensor, it must be digitized and manipulated into a form amenable to signal processing. The challenge, and the key to successful applications, is to manage this transformation in real time while maintaining the integrity of the original signal
      • Processing power is delivered by a Xilinx Virtex-4 FPGA (field-programmable gate array). This FPGA allows users to run customized algorithms such as digital down/up conversion (wideband or narrowband), Fast Fourier Transforms (FFTs), and filtering directly on the ECV4-2. Modules are available in air-cooled or conduction-cooled versions [...]
    • PowerStream 7000 FCN
      An FPGA Compute Node (FCN) that can incorporate up to 69 Xilinx 7 million-gate FPGAs connected by a RapidIO switch fabric (+)

      Features:

      31382.jpg
      • Includes up to 46 10-Gigabit fiber connections directly to the FPGAs
      • 320 Gbps of I/O available in the base configuration
      • Base configuration uses PowerPC 7447A processors connected by a RapidIO switch fabric
    • MCJ6 FCN Module
      A module that integrates FPGAs into RACE++ VME multicomputers (+)

      Features:

      17596.jpg
      • 6U VME board with two Xilinx Virtex II Pro P70 FPGAs connected to a RACE++ switch fabric via an onboard crossbar
      • Eight serial copper interfaces, 12 serial fiber optic interfaces, and 52 pairs of LVDS I/O
      • More than 5 GBps of I/O
    • PowerStream 6600
      A fully integrated, conduction-cooled multicomputer based on the VPX-REDI draft standards (+)

      Features:

      31429.jpg
      • 16 payload modules can house 64 PowerPC processors or a heterogeneous mix of PowerPCs and Xilinx Virtex-4 FPGAs
      • Conduction-cooled format based on VPX-REDI standard (draft) form factor
      • RapidIO fabric supports an aggregate system bandwidth exceeding 34 GBps and a bisection bandwidth of 16 GBps
    • Ensemble IOM-300 series
      The Ensemble IOM-300 series are the industry’s first open systems architecture-based XMC modules to feature two FPGA devices for streaming sFPDP, Ethernet and other wideband protocols. The primary Altera industrial-grade Stratix V FPGA is a highly customizable processing resource for low-latency signal processing supported by a second configuration FPGA that enables in-mission, real-time FPGA image refreshes for the Stratix V. Each of the module’s twelve channels may be programmed for data distribution, with or without user customization, via the primary FPGA device. (+)

      Features:

      322840858621356724.jpg
      • Twelve channel, front-panel access fiber I/O or eight channel copper I/O ports
      • Supporting sFPDP (VITA 17.1), 10Gb/s Ethernet, Fibre Channel and unrestricted PCIe Gen 3 data rates
      • Altera Stratix V FPGA with second FPGA programing and personalized security capability
    • HCD3200
      A 3U VPX Processing Module Designed and architected for OpenVPX interoperability (+)

      Features:

      • Part of the Ensemble 3000 Series 3U VPX systems
      • Delivers significant real-time processing power from a Freescale MPC8640D dual-core processor and a Xilinx Virtex-5 FPGA
      • A 24-port PCIe switch connects the Virtex-5 FPGA, the MPC8640D, and the module's backplane connector, all with x8 2.5 Gbps links
    • Ensemble MTI-203
      RapidIO DSP/FPGA signal and video processing AdvancedMC Card for developing and deploying LTE, WiMAX, next-generation video, or basestation applications (+)

      Features:

      34795.jpg
      • High-performance AMC for next-generation mobile broadband applications
      • Supports 20 MHz WiMAX multi-antenna solutions on a single AMC
      • Combined DSP and FPGA technology for optimal application partitioning
    • 3U OpenVPX FCN3110
      The FCN3110 FPGA Compute Node Module is a critical component within Mercury's powerful Ensemble 3000 Series 3U VPX systems, functioning as both a high-performance FPGA processing and an I/O carrier (+)

      Features:

      43708.jpg
      • Compatible with OpenVPX system architecture design principles
      • LX330T, LX220T, or LX110T Xilinx Virtex-5 FPGA
      • Variety of I/O choices, including 24-port PCIe switch with x8 2.5 Gbps links, x4 3.125 Gbps XAUI links to backplane, and XMC site
    • ECDR-112-E
      100 MHz EFFECTIVE BANDWIDTH (460 MSPS) (+)

      Features:

      • 12 BIT A/D CONVERTERS; 4 TIMES OVERSAMPLING
      • A/D AUTO-CALIBRATION
      • 16 BIT ACCURATE NCO
    • Echotek Series DCM-V5-XMC
      A flexible FPGA-based architecture in a space-efficient mezzanine card form factor (+)

      Features:

      40594.jpg
      • User-programmable Virtex-5 FPGA functions as the primary data processor
      • Supported by Mercury's EchoCore firmware library
      • Two, single IF channel, Texas Instruments ADS6149 analog-to-digital converters
    • FPGA Compute Node (FCN) Developer's Kit
      Expert switch fabric, memory, and I/O integration (+)

      Features:

      • Open interfaces, shared across products and generations
      • Faster FPGA development and integration
      • Mitigates project risks [...]
  • Lavacore  (1)
  • XILINX, Inc.  (15 of 21)
    • PicoBlaze
      The Xilinx PicoBlaze is a compact, capable, and cost-effective fully embedded 8-bit RISC microcontroller core optimized for the Xilinx Spartan™-3, Virtex™-II, Virtex-II Pro™ and Virtex-4 FPGAs and CoolRunner™-II CPLDs (+)

      Features:

      • Predictable performance, always two clock cycles per instruction, up to 200 MHz or 100 MIPS in a Virtex-4™ FPGA and 88 MHz or 44 MIPS in a Spartan-3 FPGA
      • 16 byte-wide general-purpose data registers
      • 1K instructions of programmable on-chip program store, automatically loaded during FPGA configuration
    • XtremeDSP Development Tools
      Model and design your system using MATLAB, Simulink, and blocksets from The MathWorks (+)

      Features:

      31771.jpg
      • Use the Xilinx bit and cycle accurate library for designing algorithms for the FPGA
      • Import MATLAB algorithms like linear algebra and matrix inversion and multiplication
      • Automatically generate HDL or a bitstream at the push of a button with no loss in performance over designs written in HDL
    • FPGAs for DSP
      Virtex-4 FPGAs for highest performance DSP (+)

      Features:

      • Up to 512, 500 MHz
      • XtremeDSP Slices (18 x 18 multiply, 48-bit add)\
      • Virtex-4 for lowest power per channel – each XtremeDSP Slice consumes only 2.3 mW per 100 MHz
    • Virtex®-6 HXT FPGA
      Virtex®-6 HXT FPGA Optical Transport Network (OTN) Targeted Design Platform for supporting faster market implementation of 100G line cards (+)

      Features:

      47518.jpg
      • Virtex-6 HXT FPGAs offer the industry's highest serial bandwidth through a combination of 6.6 Gbps GTX transceivers and 11.18 Gbps GTH transceivers to enable next-generation packet and transport, switch fabric, video switching and imaging equipment
      • The devices are built on 40nm process using third-generation Xilinx ASMBL™ architecture and offer 15 percent higher performance and 50 percent lower power consumption as compared with competitive 40nm FPGA offerings
      • The devices operate on a 1.0v core voltage with an available 0.9v low-power option [...]
    • ISE Design Suite 10.1
      One integrated front-to-back FPGA IP catalog and design tool suite with unified interoperability (+)

      Features:

      • Domain specific design capture for DSP, embedded and logical design
      • Accelerated system development via customization and integrated libraries of optimized IP
      • Design tools optimized to minimize area while maximizing performance for Virtex-5 and Spartan-3 family Platform FPGAs
    • Virtex-5 LX FPGA
      Industry's First 65nm FPGA (+)

      Features:

      • ExpressFabric™ technology allow designs to be packed more efficiently
      • 330,000 logic cells
      • 1200 user I/Os
    • ISE Foundation 8.2i
      A programmable logic design solution (+)

      Features:

      31663.jpg
      • Supports the Virtex-5 family
      • Xilinx Fmax technology provides a powerful design closure environment
      • An integrated timing closure environment helps identify bottlenecks in Virtex-5 FPGA designs quickly and easily
    • Xilinx Connectivity Solutions
      Virtex-5 FPGA Development Kit for PCI Express®: Create high-performance 1-8 lane PCIe® systems for communications and networking, video and broadcast, storage and computing, industrial, and aerospace/defense applications (+)

      Features:

      42299.jpg
      • Spartan-3 FPGA PCI Express® Starter Kit: Low-risk path for high- volume applications provides a two-chip solution pairing Spartan-3 FPGA and NXP PHY with an embedded single-lane PCI Express endpoint that is fully compliant with the PCIe v1.1 specification
      • Virtex-5 FPGA Gigabit Ethernet Development Kit: Scalable, on-chip Ethernet connectivity at 10/100 Mbps and 1 Gbps speeds with four Tri-Mode Ethernet MACs and embedded low-power serial transceivers to support MII, GMII, RGMII, and SGMII physical layer (PHY) interfaces [...]
    • MPEG-4 Codec
      An integrated single-chip, MPEG4 Part 2, Simple Profile CODEC that enables FPGA utilization (+)

      Features:

      • Full duplex D1 in a single FPGA
      • Host processor or Xilinx MicroBlaze interface for fast, easy control
      • Variable/constant bit rate under host processor control
    • Xilinx Spartan-6 FPGA Connectivity Development Kit
      RoHS-compliant SP605 board with Spartan-6 LX45T FPGA device, universal power supply, and accessory cables (+)

      Features:

      42978.jpg
      • ISE Design Suite Logic Edition tailored for logic and connectivity designers (device locked Spartan-6 LX45T FPGA)
      • PCIe-DMA-DDR3-Gigabit Ethernet targeted reference design
      • Example designs including hard memory controller and iBERT
    • The XtremeDSP Video Starter Kit – Spartan™-3A DSP FPGA Edition
      Development board (+)

      Features:

      • FMC-Video I/O daughtercard, a Micron VGA CMOS Camera Module
      • One year entitlement to Xilinx EDK and System Generator
      • Two devices, the XC3SD3400A and the XC3SD1800A [...]
    • XC1800
      In-system programmable serial/parallel-load Flash CPLD/FPGA configuration PROMS which can be used for the logic initialization of any SRAM-based CPLDs (+)

      Features:

      • 128 Kbits to 4 Mbits of configuration memory
      • Programmed with IEEE 1149.1 boundary scan JTAG circuitry
      • I/O pins accept 5V, 3.3V, and 2.5V signals while driving 3.3V or 2.5V output signals
    • Embedded Development HW/SW Kit – Spartan-3A DSP S3D1800A MicroBlaze Processor Edition
      Full seat of the award winning platform studio embedded tool suite (+)

      Features:

      • Full seat of ISE WebPACK FPGA design software
      • Powerful reference designs accelerate your development
      • Communications cables and comprehensive documentation
    • Spartan-II XC2S100
      An FPGA with 100,000 system gates (+)

      Features:

      • Programmable support for multiple I/O standards
      • On-chip block RAM
      • Digital delay lock loops for both chip-level and board-level clock management
    • AdvancedTCA Development Platform
      XC2VP50 Virtex-II Pro Platform FPGA with 128 MB of DRAM (+)

      Features:

      • 15 Channel, 1 Port, Full Mesh fabric interface
      • PPC management complex and Linux BSP
      • Programmable interface to application specific Personality Module area
  • Pentek, Inc.  (15 of 60)
    • 71861
      Model 71861 is a member of the JadeTM family of high-performance XMC modules. The Jade architecture embodies a new streamlined approach to FPGA-based boards, simplifying the design to reduce power and cost, while still providing some of the highest-performance FPGA resources available today. Designed to work with Pentek’s new NavigatorTM Design Suite of tools, the combination of Jade and Navigator offers users an efficient path to developing and deploying FPGA-based data acquisition and processing. (+)

      Features:

      350844755569383844.jpg
      • Complete radar and software radio interface solution
      • Supports Xilinx Kintex UltraScale FPGAs
      • Four 200 MHz 16-bit A/Ds
    • 6256
      Dual/Quad A/D VIM-2 module with FPGA (+)

      Features:

      18976.jpg
      • Two or four 14-bit, 105 MHz /Ds
      • Two user-configurable Virtex-II Pro FPGAs
      • 64 MB SDRAM and 16 MB flash per FPGA
    • 6251
      Configurable logic FPGA VIM-2 module (+)

      Features:

      17473.jpg
      • Supports high-performance custom signal processing
      • Up to two FPDP or LVDS I/O front-panel interfaces
      • Two Virtex-II Pro FPGAs
    • Cobalt 71661
      4-Channel 200 MHz A/D with DDCs and Virtex-6 FPGA - XMC (+)

      Features:

      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Four 200 MHz 16-bit A/Ds
    • Cobalt 78661
      4-Channel 200 MHz A/D with DDCs and Virtex-6 FPGA - x8 PCIe (+)

      Features:

      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Four 200 MHz 16-bit A/Ds
    • Model 71800
      Model 71800 Kintex UltraScale FPGA Coprocessor - XMC (+)

      Features:

      3980545186213948700.jpg
      • High-performance co-processor platform
      • Supports Xilinx Kintex UltraScale FPGAs
      • Front panel digital I/O can be used as a status and control or data interface
    • Cobalt 78650
      TTwo 500 MHz A/Ds, DUC, 800 MHz D/As, Virtex-6 FPGA - x8 PCIe (+)

      Features:

      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Two 500 MHz 12-bit A/Ds
    • Cobalt 71630
      1 GHz A/D and D/A, Virtex-6 FPGA - XMC (+)

      Features:

      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • One 1 GHz 12-bit A/D
    • Cobalt 71650
      TTwo 500 MHz A/Ds, DUC, 800 MHz D/As, Virtex-6 FPGA - XMC (+)

      Features:

      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Two 500 MHz 12-bit A/Ds
    • 7350
      Quad 200 MHz, 16-bit A/D 3U CompactPCI (+)

      Features:

      38672.jpg
      • Four 200 MHz 16-bit A/D converters
      • Two Xilinx Virtex-5 FPGAs
      • Up to 1.5 GB DDR2 SDRAM
    • 7150
      Quad 200 MHz, 16-bit A/D PMC/XMC (+)

      Features:

      38701.jpg
      • Four 200 MHz 16-bit A/D converters
      • Two Xilinx Virtex-5 FPGAs
      • VITA 42.0 XMC compatible with switched-fabric interfaces
    • 7650
      Quad 200 MHz, 16-bit A/D - PCI (+)

      Features:

      38673.jpg
      • Four 200 MHz 16-bit A/D converters
      • Half-length PCI board
      • Two Xilinx Virtex-5 FPGAs
    • 7342 / 7242D
      Multichannel Software Radio Transceiver with Virtex-4 FPGAs - 3U/6U CompactPCI (+)

      Features:

      34440.jpg
      • Complete software radio interface solution
      • Four or eight 125 MHz 14-bit A/Ds
      • One or two digital upconverters
    • 6250
      Configurable logic FPGA VIM-2 module with FPDP I/O (+)

      Features:

      9953.jpg
      • Two Virtex-II FPGAs
      • One or two FPDP interfaces for high-speed I/O through front panel connectors
      • Factory-installed IP cores available [...]
    • 4205
      PMC/VIM carrier PowerPC VME board (+)

      Features:

      15603.jpg
      • Hosts two VIM-2 modules, one VIM-4, or one VIM-2 plus one PMC module
      • Freescale 1.267 GHz MPC7457 G4 PowerPC processor
      • Xilinx Virtex-II FPGAs
  • PLDA  (1)
    • PCIe Gen 3 IP for ASIC, FPGA & SoC
      PLDA offers the most complete IP solutions for the PCIe interface with products designed to speed your time-to-design for ASIC, FPGA and SoC products. (+)

      Features:

      214683128961852862.jpg
      • XpressRICH3 PCIe 3.0 IP for ASIC: A highly configurable PCIe endpoint, root port, and switch semiconductor IP with support for PCIe 3.0 at Gen3, Gen2, Gen1 speeds, in x1, x2, x4, x8, x16.
      • XpressRICH3-AXI PCIe 3.0 IP with AXI for ASIC: A configurable PCIe Gen3 IP solution featuring an AXI3/AXI4 compliant user interface with built-in DMA.
      • QuickPCIe – PCIe with Enhanced DMA for FPGA: A flexible PCIe 3.0 interface IP with advanced DMA that exposes an AMBA AXI4 interface to the user. Targeted to Altera or Xilinx FPGAs.
  • Annapolis Micro Systems, Inc.  (15 of 19)
    • WILDSTAR A5 for OpenVPX 6U
      These FPGA boards include 3 Altera Stratix V FPGAs with 48 High Speed Serial connections performing up to 14.1 Gbps. On each Compute Processing Element (CPE) FPGA there is six 72-bit QDRII+ SRAM interfaces clocked up to 550 MHz. The IO Processing Element (IOPE) FPGA has four 32-bit DDR3 DRAM ports clocked at up to 800 MHz. With included High Speed Serial (HSS) FPGA cores (including 40GBASE-KR), there is up 20 GB/s of bandwidth on the VPX data plane which can go directly to other VPX cards or to a switch, depending on backplane topology. (+)

      Features:

      • One, Two or Three ALTERA STRATIX® V FPGAS
      • PCIe Gen3 8x from each FPGA to on-board PCIe switch
      • 16x High Speed Serial IO lanes to VPX Data Plane (P1) for 20 GB/s of Full Duplex Bandwidth
    • Wildstar 6 for OpenVPX
      Our 14th-generation WILDSTAR 6 for OpenVPX uses Xilinx's newest Virtex-6 FPGAs for state-of-the-art performance (+)

      Features:

      45439.jpg
      • Up to three Virtex-6 FPGA processing elements - XC6LX240T, XC6LX365T, XC6LX550T, XC6SX315, or XC6SX475
      • Up to 7 GB DDR2 DRAM in 14 banks or up to 448 MB DDRII or QDRII SRAM
      • OpenVPX backplane
    • Wildstar 6 for OpenVPX
      Our 14th-generation WILDSTAR 6 for OpenVPX uses Xilinx's newest Virtex-6 FPGAs for state-of-the-art performance (+)

      Features:

      45439.jpg
      • Up to three Virtex-6 FPGA processing elements – XC6LX240T, XC6LX365T, XC6LX550T, XC6SX315, or XC6SX475
      • Up to 7 GB DDR2 DRAM in 14 banks or up to 448 MB DDRII or QDRII SRAM
      • OpenVPX backplane
    • CoreFire FPGA Development Tool Suite
      The CoreFire Design Suite is a Graphical User Interface (GUI) tool using Data Flow Methodology which combines Annapolis's extensive systems and application development experience with their large collection of tightly crafted high performance Intellectual Property (IP) Cores (+)

      Features:

      16201.jpg
      • With CoreFire TM it is possible to completely implement an algorithm on our WILD TM Family of Field Programmable Gate Array (FPGA) boards without ever descending to the lower level hardware details [...]
    • Wild40 for PCIe FPGA Boards
      Range of FPGAs to choose from (+)

      Features:

      333792402861309046.jpg
      • PLX PCI Express Gen3 Switch
      • Xilinx® Zynq-7000 SoC
      • Provides dedicated AXI bus to FPGA for register access without requiring PCIe interface
    • WILDSTAR 6/AMC
      One Virtex 6 FPGA per board with FPGA sizes up to LX550T or SX475T. Memory options of either up to 2.5 GBytes DDR3 DRAM for 16 GB/s or up to 64 MBytes DDRII+ or QDRII SRAM for 12.6 GB/s. Up to 549K logic cells and 907K multiplier bits per board. Air Cooled Only. (+)

      Features:

      293452569861964237.jpg
      • One Virtexâ„¢ 6 FPGA Processing Element
      • Up to 2.6 GB DDR2 DRAM in 5 Memory Banks for FPGA on Board or Up to 2.6 GB DDR3 DRAM in 5 Memory Banks for FPGA on Board or Up to 64 MB DDRII+ or QDRII SRAM in 4 Memory Banks for FPGA on Board
      • On Board Host Freescale P1020 or P2020 PowerPC
    • 1.5 Ghz A/D I/O Card
      1.5 GHz A/D I/O Daughter Card, which can condition and translate the analog input signals, perform the A/D conversion, do an 8K Point Integer FFT and other user programmed processing in real time, at up to 1.5 Giga samples per second (+)

      Features:

      • FPGA based high speed processing boards combines the A/D power of Maxim's MAX 104 or MAX 108 with the processing power of one Xilinx Virtex II FPGA and one Xilinx Virtex E FPGA [...]
    • WILDSTAR 5 for PCI Express with Xilinx Virtex 5
      Up to three Xilinx Virtex-5 FPGA I/O processing elements – LX110T, LX220T, LX330T, or FXT Up to 7 GB DDR2 DRAM in 12 memory banks per board or up to 2 GB DDR2 DRAM in two memory banks and up to 40 MB DDRII, QDRII SRAM, or up to 1.4 GB RLDRAM (+)

      Features:

      36017.jpg
      • Programmable flash for each FPGA to store FPGA image
      • 8x PCI Express bus
      • High-speed DMA multichannel PCI controller
    • Quad Fibre Channel 2 I/O
      Four full-duplex channels with up to 400 MBps peak data rate per channel (+)

      Features:

      19246.jpg
      • Up to 1.6 GBps total Fibre Channel 2 I/O per I/O card
      • Up to 4 GBps per I/O card total bandwidth down to motherboard
      • No bus latency between FC2 I/O data source and processing power
    • WILDSTAR 6 PCIe
      Up to three Xilinx Virtex-6 FPGA I/O processing elements - LX240T, LX365T, LX550T, SX315T, or SX475T (+)

      Features:

      46784.jpg
      • Up to 8 GBytes DDR2 DRAM or DDR3 DRAM in 14 memory banks per WILDSTAR 6 for PCI Express board or up to 480 MBytes DDRII+/QDRII DRAM in 15 memory banks
      • Programmable FLASH for each FPGA to store FPGA images
      • 8X PCI Express Bus Gen 1 or Gen 2
    • WILDSTAR 6 PCIe
      Up to three Xilinx Virtex-6 FPGA I/O processing elements – LX240T, LX365T, LX550T, SX315T, or SX475T (+)

      Features:

      46784.jpg
      • Up to 8 GBytes DDR2 DRAM or DDR3 DRAM in 14 memory banks per WILDSTAR 6 for PCI Express board or up to 480 MBytes DDRII+/QDRII DRAM in 15 memory banks
      • Programmable FLASH for each FPGA to store FPGA images
      • 8X PCI Express Bus Gen 1 or Gen 2
    • CoreFire Design Suite
      A GUI tool used for developing FPGA-based hardware applications (+)

      Features:

      • Enables programmers with no digital design experience to quickly produce high-performance applications on Annapolis WILD FPGA-based boards
      • Allows the user to operate on the conceptual, data-flow level throughout the entire design process
      • Includes the CoreFire Application Builder, the CoreFire Application Debugger, the CoreFire Module Libraries, and the CoreFire BSP Libraries [...]
    • Universal 3Gbit IO
      A 3 Gb I/O card that provides up to 36 Gb full duplex I/O directly between the outside world and the rocket I/O pins on the Xilinx Virtex-II Pro FPGA processors on the WILDSTAR II Pro main board (+)

      Features:

      30041.jpg
      • Up to 12 Gb full-duplex rocket I/O per connector
      • Up to 10 Gb full-duplex InfiniBand per connector
      • Up to 10 Gb full-duplex Ethernet per connector
    • WILDSTAR II Pro for VME
      One to three Virtex II Pro Xilinx FPGA processing elements – XC2VP70 or XC2VP100 (+)

      Features:

      19242.jpg
      • Up to 144 MB DDRII or QDRII SRAM
      • Up to 384 MB DDR DRAM
      • Programmable Flash for each processing element to store FPGA images
    • WILDSTAR II Pro for PCI
      One to two Virtex II Pro Xilinx FPGA processing elements – XC2VP70 or XC2VP100 (+)

      Features:

      19243.jpg
      • Up to 96 MB DDRII or QDRII SRAM
      • Up to 256 MB DDR DRAM
      • Programmable Flash for each processing element to share FPGA images
  • Embedded Systems Design, Inc.  (1)
    • StreamBlade Family
      FPGA based platforms support development of combined software and reconfigurable hardware processing applications (+)

      Features:

      • Developers have full access to configured FPGAs and general purpose processors
      • GbE ports, utilizing hard core MACs allow for the implementation of distributed FPGA processing nodes
      • Ethernet connectivity provides network based command, control, and status
  • DRS Technologies  (2)
    • Chameleon VMEbus
      A family of reconfigurable VMEbus I/O boards (+)

      Features:

      • 6U VME64X with up to 133 MHz bus rate and up to 266 MHz FPGA rate
      • Xilinx Virtex processors (XCV1000E to XCV2000E, up to four FPGAs per board)
      • Supports up to three PMC (64 bit / 66 MHz) mezzanine sites
    • Chameleon VME
      A reconfigurable processor board (+)

      Features:

      • Four Xilinx Virtex-1000E FPGAs
      • Up to 56 Mbytes of SRAM
      • Up to 128 Mbits of configurable memory
  • Spectrum Signal Processing  (6)
    • PRO-3100
      A 6U, CompactPCI Virtex-II FPGA processing engine (+)

      Features:

      14186.jpg
      • Designed to interface to the TMI-3300 and PRO-3500 (PowerPC G4) boards
      • Four user-programmable Virtex-II FPGAs, each supporting up to six million gates
      • IBM 405GP PowerPC embedded controller
    • HCDR-1002
      A PowerPC-based high-channel-density receiver with FPGA-based channelization (+)

      Features:

      • Processes up to 26 MHz at 65 Msamples/sec
      • High-speed communications fabric based on the Solano Communications IC
      • Two 14-bit, 65 or 80 Msamples/sec analog-to-digital converters from Xilinx Virtex-E series FPGAs for channelization functions
    • ePMC-8120
      A Xilinx Virtex-II FPGA processing engine (+)

      Features:

      15287.jpg
      • Single-width enhanced Processor Mezzanine Card (ePMC)
      • Incorporates a Xilinx XC2V6000 Virtex-II FPGA with 6 million system gates
      • 512 Mbytes of DDR SDRAM
    • quicComm Library
      A software library that enables board and system features not available through standard operating system calls (+)

      Features:

      • Supports high-performance interprocessor communications
      • Simplified board and system setup and control
      • Provides a standard application interface to many of Spectrum's flexComm family of products
    • QuicWave
      Waveform development software for use with Spectrum's HCDR product line (+)

      Features:

      • Provides FPGA cores and signal processing libraries for creating optimized waveforms and modems for software-defined radio applications
      • Compatible with VxWorks [...]
    • ePMC-FPGA
      A multi-purpose I/O processing engine module (+)

      Features:

      11700.jpg
      • Single width Solano-based Enhanced PMC (ePMC)
      • Supports multi-channel, multi-mode receivers for both narrowband and wideband air-interfaces (IS-95 CDMA, GSM, and W-CDMA)
      • Distributed IF architecture supports systems with 4-12 inputs and 32-480 channels/chassis
  • Digilent Inc.  (4)
    • Basys
      Circuit design platform for anyone who wants to learn about FPGAs and digital circuit design (+)

      Features:

      38301.jpg
      • Xilinx Spartan3-E FPGA, 100K, or 250K gate featuring 18-bit multipliers, 72 Kb of fast dual-port block RAM, and 500 MHz+ operation
      • USB 2 port for FPGA configuration and data transfers (software available as a free download)
      • XCF02 platform flash ROM that stores FPGA configurations indefinitely
    • Cmod A7 Breadboardable Artix-7 FPGA Module
      The Digilent Cmod A7 is perfect for rapid prototyping. The small, breadboard friendly 48-pin DIP form factor makes it easy to embed into a small project. It is built around a Xilinx Artix-7 FPGA. We offer two flavors - Cmod A7-15T and Cmod A7-35T. The only difference between the Cmod A7-15T and Cmod A7-35T is the capabilities of the FPGA found on the board. There are 44 Digital FPGA I/O signals and two FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit (+)

      Features:

      345654902591879266.jpg
      • XC7A15T-1CPG236C for A15T / XC7A35T-1CPG236C for A35
      • 48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V)
      • USB-JTAG Programming Circuitry
    • Nexys 3
      NEXYS™ 3 board, the latest addition to their family of FPGA-based design kits. Featuring Xilinx’s newest Spartan6 FPGA, 48Mbytes of external memory (including two non-volatile phase-change memories from Micron), USB and Ethernet ports and other common I/O devices, the Nexys3 board is perfectly suited for academic and industrial design settings. Students and engineers alike can build circuits ranging from simple logic circuits, to CODECS and custom device controllers, to embedded processors without needing any other equipment and for less than the cost of a textbook. (+)

      Features:

      198012610031694729.jpg
      • Spartan6 FPGA
      • 48Mbytes of external memory [...]
    • Nexys2
      Powerful digital system design platform built around an Xilinx Spartan3E FPGA (+)

      Features:

      • 16 Mb of fast SDRAM and 16 Mb of flash ROM
      • Xilinx Spartan3E FPGA, 500K or 1,200K gate
      • USB2 port providing board power, device configuration, and high-speed data transfers
  • Technobox  (1)
    • 7757
      An advanced FPGA-based module for configurable digital I/O that offers in the XMC form factor many of the features and functions of the long-running Technboox P/Ns 2674 and 4289. The standard assembly employs an Altera Cyclone FPGA (5CGXFC4C6F27I7N) and features 32 general-purpose RS422/RS485 driven digital I/Os wired to the front panel and PN4 connector. The 32-bit data bus is shared by the FPGA and interfaced devices. SRAM (256K x 32b) is accessible from the FPGAS and PCIe interface. SRAM address is driven by FPGA outputs, allowing a variety of SRAM architectures. (+)

      Features:

      324884813334770097.jpg
      • 32-Channel general purpose digital I/O -- RS422 and RS485
      • Front and rear I/O with flexible termination
      • Separate direction control for each RS485 channel
  • 3L Ltd  (2)
    • DIamond DSP & FPGA
      Supports the development of applications for hardware comprising multiple DSP and FPGA processors (+)

      Features:

      • True multiprocessor RTOS for DSP
      • Consistent, simple model for multiprocessing
      • Identical model for DSP and FPGA
    • Diamond FPGA
      Diamond FPGA builds a single application file by taking DSP and FPGA tasks and automatically combining them with all the necessary support logic (+)

      Features:

      31281.jpg
      • Loading this one file initializes every DSP and FPGA in the system and starts the final application running
      • Hardware/software codesign environment uses VHDL or high-level EDA tools
      • Provides an optimization framework for thread-based functions [...]
  • Alorium Technology  (1)
    • XLR8: FPGA-based Development Board
      XLR8 is a drop-in replacement for an Arduino Uno. It is an Arduino-compatible board that uses a Field-Programmable Gate Array (FPGA) as the main processing chip. The FPGA hosts an ATmega328 instruction set compatible microcontroller and allows for implementation of custom logic to accelerate functionality that is slow or problematic for 8-bit microcontrollers. XLR8 significantly improves performance in the same physical footprint as standard Arduino Uno and is programmed with the Arduino IDE. XLR8 also provides a great platform for learning the basics of FPGA design. (+)

      Features:

      342946750832273546.jpg
      • Faster Application Speeds
      • Higher Computational Performance
      • Customizable
  • Derivation Systems, Inc.  (1)
    • PF2000
      A PC/104-based flexible reconfigurable I/O controller (+)

      Features:

      • PC/104-compliant stackable modules
      • User configurable architecture
      • 25 user-configurable IO pins
  • RPA Electronics Design, LLC  (1)
    • FIO series
      A PC/104+ card (+)

      Features:

      • 32-bit, 33 MHz PCI interface
      • 1K bidirectional FIFO
      • Altera 10 Kbyte FPGA
  • Athena Group  (2)
    • D2 Board
      A PC-hosted development board containing one 'C6211/'C6711 DSP and two Altera APEX FPGAs (400/600/1000/1500K gate densities available) (+)

      Features:

      • 256 Kbytes of SRAM
      • 64 Mbytes of SDRAM
      • 53-Gbit/sec I/O
    • A7-400/600
      A board that contains an Altera Philips Semiconductors Volocity RSP7, and programming cable and documentation (+)

      Features:

      • Up to three A7 boards can be installed on an Athena ARM-based platform, providing up to 4.5M FPGA gates
      • FPGAs may be programmed with user-defined logic or Athena DSP cores [...]
  • Samplify  (3)
    • Samplify for FPGA
      Samplify for FPGA is the first compression technology that can be applied to sampled data systems, providing compression results near or often better than Nyquist (+)

      Features:

      33860.jpg
      • Operating in either lossless mode or Equivalent Results mode, Samplify compression enables system architects to trade off compression ratio for system performance
      • Samplify for FPGA is available for both Altera and Xilinx FPGAs
      • Samplify for Windows enables system architects to evaluate compression for their application [...]
    • SFA-01
      Samplify for FPGA is a high-performance real-time compression/decompression core for implementation in FPGAs [...] (+)

      Features:

    • SFW
      Signal analysis tool for evaluating the compressibility of sampled data (+)

      Features:

      • 2X to 8X typical compression rates
      • Sample size 8-16 bits
      • Modes: Lossless; fixed rate; fixed quality
  • Conduant Corporation  (1)
    • SNAP12 Optical FPGA Cardâ„¢
      SNAP12 Optical FPGA input/output board from Conduant is available for a wide variety of high-speed optical PCI-Express applications (+)

      Features:

      • Xilinx® Virtex 6â„¢ field programmable gate array (FPGA) for connecting ports and devices
      • performance rates up to 5 Gigabytes (GB) per second for 12 lanes in and 12 out simultaneously
      • 8 GB of high-speed DDR3 SDRAM
04/10/18 17:55
Close

Subscribe to FPGA updates