FPGA

Showing results for: field-programmable gate array
Refine FPGA companies and products:
field-programmable gate array fpga fpgas
Click on any vendor
to see a listing of
field-programmable gate array related products.
  • Advanced Optical Systems  (2)
    • AOS PCI-104-4000
      High bandwidth PCI-104 processing board based on Field Programmable Gate array technology (+)

      Features:

      45481.jpg
      • Onboard Xilinx LX Virtex-4 FPGA
      • High bandwidth auxiliary bus for transferring large data sets to/from the PCI-104-4000 for I/O or for further processing such as the AOS (PCI-104-3000 Video Acquisition and Processing Board)
      • Four banks of 1Mx32 SRAM memory supporting highly parallel processing
    • AOS PCI-104-3000
      Provides multiple simultaneous inputs from industry video camera standards including Camera Link, Firewire and GigE. On-board FPGA for video data acquisition and processing (+)

      Features:

      45480.jpg
      • Xilinx FX class Virtex 4 Field Programmable Gate Array with up to 2 PowerPC processors
      • Multiple video inputs: 1-Firewire (1394A) port; 1-Camera Link (Base) port; 2-GigE ports
      • High bandwidth data bus for transferring large data sets off of the board to a custom daughter card or a processing card such as the AOS PCI-104-4000 Signal Processing Board
  • National Semiconductor  (4)
    • NSC Ref Designs
      Six new reference designs from National Semiconductor Corp. enable products that consume less power, extend battery life and generate less heat (+)

      Features:

      • PowerWise reference designs combine energy-efficient devices and arrange them in a system to actively lower power consumption and reduce heat dissipation
      • Each proven PowerWise reference file kit includes applicable design schematic, bill of materials (BOM), board layout, firmware, design documentation and field-programmable gate array (FPGA) source code in synthesizable Verilog or VHDL
      • The designs address a wide range of applications including portable, lighting, solar, industrial, medical, communications infrastructure, and test and measurement. For more information on these reference designs, visit www.national.com/refdesign
    • DS64EV400 Equalizer
      Compensates for transmission medium losses and reduces deterministic jitter for four data transmission channels (+)

      Features:

      • Provides 20 dB of boost to equalize up to 10 m of CAT5 cable, up to 40 inches of FR-4 printed circuit board (PCB) at data transmission rates up to 6.4 Gbps and up to 30 inches of FR-4 at data rates up to 10 Gbps -- with only 0.175 units interval (UI) of residual jitter at the equalizer output
      • Inactive channels can be automatically shutdown for further power savings of 85 percent per channel
      • Field-programmable gate arrays (FPGAs) and transmission media
    • LMH0384
      National Semiconductor Introduces Industry's Lowest Jitter 3-Gbps SDI Equalizer (+)

      Features:

      • The LMH0384 simplifies the design of broadcast video routers, production switchers, distribution amplifiers, editing and conversion equipment. Tighter jitter budgets translate to cleaner system design, fewer bit errors and crisper images
      • The energy-saving LMH0384 offers the industry's lowest output alignment jitter across cable lengths allowing hardware designers more headroom for designing within system jitter budgets.Tighter jitter budgets translate to cleaner system design, fewer bit errors and crisper images
      • The LMH0384 is the only EQ to guarantee less than 0.3 unit intervals (UI) of output jitter from zero to 110m of Belden 1694A coaxial cable at 2.97-Gbps. It equalizes up to 140m of cable at 3G rates, 200m at high-definition (HD) rates and 400m at standard-definition (SD) rates
    • ADC16DV160
      The ADC16DV160 is the first dual-channel 16-bit, 160 MSPS pipeline ADC (+)

      Features:

      42697.jpg
      • It's targeted at multi-carrier, multi-standard GSM/EDGE, WCDMA, LTE, and WiMAX wireless basestations
      • The ADC16DV160 consumes less than half the power per ADC channel (650 mW) compared to competing single-channel 16-bit 160-MSPS pipeline ADCs, while offering the largest input-bandwidth (1.4 GHz) and the industry's best dynamic performance at high input frequencies
      • The ADC16DV160 delivers 91.2 decibels full scale (dBFS) spurious-free dynamic range (SFDR), 76.3 dBFS signal-to-noise ratio (SNR) and 97.3 dBFS higher-order harmonic distortion at 197 MHz input frequency
  • GE Intelligent Platforms, Inc.  (5)
    • Tsunami PC104
      A Field Programmable Gate Array (FPGA) processor for PC/104-Plus systems (+)

      Features:

      17251.jpg
      • Integrates with the Wave FPGA software tool kit from SBS for easy application development
      • Suitable for mobile cart-based systems, machine sensor, and control I/O applications
      • Altera Stratix FPGAs on a 32-bit/33-MHz PCI interface with memory and high-bandwidth data paths
    • ICS-572
      2-channel ADC, 2-channel DAC with Xilinx FPGA SDRAM, QDR SRAM, and PCI 64/66 interface (+)

      Features:

      33579.jpg
      • 2-channel Software Radio
      • Receive and transmit on a single PMC
      • Sample rates: ADC 105 MHz, DAC 200 MHz
    • ICS-564
      4-channel, 14-bit, 200 MHz DAC PMC board with Integrated Digital Upconverter and PCI 64/66 interface (+)

      Features:

      33581.jpg
      • Designed for communications, radar, and test and measurement applications
      • 4 x 200 MHz DAC outputs
      • Up to 40 MHz signal bandwidth
    • ICS-8554B
      A rugged 4-channel 105 MHz ADC PMC module with DDCs, Xilinx FPGA and PCI 64/66 interface (+)

      Features:

      36713.jpg
      • 4 transformer-coupled ADC channels: 14-bits @ 105 MHz
      • 2 GrayChip GC4016 DDC ASICs
      • 3M gate Xilinx Virtex-II FPGA
    • ICS-8552B
      Rugged 2-channel SDR Receiver with High Stability TCXO (+)

      Features:

      33565.jpg
      • 2 ADC channels (Texas Instruments ADS5424): 14-bits @ 105 MHz
      • Two GrayChip 4016 DDC ASICs and 3 million gate Xilinx Virtex-II FPGA
      • Simultaneous wideband and narrowband acquisition supported
  • Annapolis Micro Systems, Inc.  (1)
    • CoreFire FPGA Development Tool Suite
      The CoreFire Design Suite is a Graphical User Interface (GUI) tool using Data Flow Methodology which combines Annapolis's extensive systems and application development experience with their large collection of tightly crafted high performance Intellectual Property (IP) Cores (+)

      Features:

      16201.jpg
      • With CoreFire TM it is possible to completely implement an algorithm on our WILD TM Family of Field Programmable Gate Array (FPGA) boards without ever descending to the lower level hardware details [...]
  • Mercury Systems  (5)
    • Echotek Series ECV4-2
      The ECV4-2, with input clock capability up to 1.5 GHz, is the highest performing digital receiver in an XMC form factor in the industry (+)

      Features:

      • Echotek Series products lead the mixed-signal industry in extracting clear signals from electronic clutter, forming a bridge between the realms of analog signals and digital processing. After an analog signal is received by an antennae or other sensor, it must be digitized and manipulated into a form amenable to signal processing. The challenge, and the key to successful applications, is to manage this transformation in real time while maintaining the integrity of the original signal
      • Processing power is delivered by a Xilinx Virtex-4 FPGA (field-programmable gate array). This FPGA allows users to run customized algorithms such as digital down/up conversion (wideband or narrowband), Fast Fourier Transforms (FFTs), and filtering directly on the ECV4-2. Modules are available in air-cooled or conduction-cooled versions [...]
    • Momentum Series AXA-110 AMC
      Momentum Series AXA-110 Advanced Mezzanine Card (AMC), which uses a dual-core Intel processor combined with an FPGA (field-programmable gate array) for flexible switch fabric connectivity (+)

      Features:

      32646.jpg
      • AMCs provide the modularity for demanding telecom and military communications, and the AXA-110 is ideally suited for the processing and communications heart of AdvancedTCA or MicroTCA systems
      • The Momentum Series AXA-110 is Mercury's second generation of AMC cards that combine a dual-core Intel processor with the latest Xilinx FPGA. The AXA-110 is the first AMC to incorporate an Intel Core 2 Duo processor, which yields more than 25 percent overall performance improvement than an Intel Core Duo processor, and more than double the overall performance of Intel Pentium M processor, as measured by SPECint_rate_base2000
      • The key to accessing the substantial processing power is the connectivity provided by the serial fabric interfaces on the AMC. Using a Xilinx Virtex-5 FPGA, the AXA-110 connects to up to 16 high-speed serial lines totaling 40 Gigabits per second
    • PowerStream 7000 FCN
      An FPGA Compute Node (FCN) that can incorporate up to 69 Xilinx 7 million-gate FPGAs connected by a RapidIO switch fabric (+)

      Features:

      31382.jpg
      • Includes up to 46 10-Gigabit fiber connections directly to the FPGAs
      • 320 Gbps of I/O available in the base configuration
      • Base configuration uses PowerPC 7447A processors connected by a RapidIO switch fabric
    • ECDR-112-E
      100 MHz EFFECTIVE BANDWIDTH (460 MSPS) (+)

      Features:

      • 12 BIT A/D CONVERTERS; 4 TIMES OVERSAMPLING
      • A/D AUTO-CALIBRATION
      • 16 BIT ACCURATE NCO
    • Echotek Series DCM-V5-XMC
      A flexible FPGA-based architecture in a space-efficient mezzanine card form factor (+)

      Features:

      40594.jpg
      • User-programmable Virtex-5 FPGA functions as the primary data processor
      • Supported by Mercury's EchoCore firmware library
      • Two, single IF channel, Texas Instruments ADS6149 analog-to-digital converters
  • Pentair Electronics Protection  (1)
    • ACB-VI Shelf Manager Based on ShMM 700
      The new Shelf Manager ACB-VI includes the ShMM 700 module (formerly Pigeon Point Systems), delivering improved security, higher availability and more robust design. (+)

      Features:

      333793534861715517.jpg
      • The Intelligent Platform Management Interface (IPMI) implementation has been upgraded by simplifying radial IPMI via a Field Programmable Gate Array (FPGA).
      • The IPMB-0 segments are logically isolated for each slot.
      • Support for communication between redundant Shelf Managers has been improved by replacing the six discrete channels used in previous versions with a stable two wire bus.
  • MYIR Tech Limited  (3)
    • Single board computer--MYIR Z-turn board
      The Z-turn Board is a low-cost and high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7010 (XC7Z010-1CLG400C) or Zynq-7020 (XC7Z020-1CLG400C) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. (+)

      Features:

      352248345617837966.jpg
      • Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
      • low-cost and high-perferformance
      • Onboard Three-axis Acceleration Sensor and Temperature Sensor
    • MYIR Z-turn board
      The Z-turn Board is a low-cost and high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7010 (XC7Z010-1CLG400C) or Zynq-7020 (XC7Z020-1CLG400C) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. (+)

      Features:

      352134084617220484.jpg
      • low-cost and high-performance
      • Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
      • takes full features of the Zynq-7010 / 7020 SoC and running Linux operating system
    • Z-turn Board
      The Z-turn Board is a low-cost and high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7010 (XC7Z010-1CLG400C) or Zynq-7020 (XC7Z020-1CLG400C) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. It is capable of running Linux operating system and would be an excellent development platform for evaluating and prototyping for Zynq-7000 SoC. (+)

      Features:

      307744543461265846.jpg
      • 667MHz Xilinx XC7Z010/020 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
      • 1GB DDR3 SDRAM (2 x 512MB, 32-bit), 16MB QSPI Flash
      • USB_UART, USB2.0 OTG, 1 x 10/100/1000Mbps Ethernet, CAN, HDMI, TF, â€?
  • ASSET InterTech  (1)
    • ScanWorks FCT
      With new tools for the ASSET® ScanWorks® platform for embedded instruments engineers can simply select instruments they need, set their parameters and insert them into a field programmable gate array (FPGA) to function as a circuit board tester. Once inserted, ScanWorks FCT operates the board-tester-in-a-chip from a drag-and-drop user interface to perform validation, test and debug. (+)

      Features:

      182346318173571832.jpg
      • .
      • .
      • .
  • MEN Micro Elektronik GmbH  (2)
    • CAN Bus Interface
      MEN Micro Inc. now offers the new Quad CAN Bus Interface PCI mezzanine card (PMC) that provides four controller area network (CAN) interface channels on a single card (+)

      Features:

      42965.jpg
      • Each interface provides a programmable loop-back mode for self-test operation as well as signaling and interrupt capabilities for receiver and transmitter error states
      • The P506's interfaces are executed via IP cores within an onboard FPGA (field-programmable gate array)
      • Corresponding line drivers are implemented on a specialized USM (Universal Submodule) module that plugs directly onto the PMC board
    • D6
      6U Single board computer (+)

      Features:

      30659.jpg
      • Pentium M or Celeron M processor
      • 24 PCI Express (PCIe) lanes
      • Suitable for communication and control applications in rugged environmental conditions
  • Alorium Technology  (1)
    • XLR8: FPGA-based Development Board
      XLR8 is a drop-in replacement for an Arduino Uno. It is an Arduino-compatible board that uses a Field-Programmable Gate Array (FPGA) as the main processing chip. The FPGA hosts an ATmega328 instruction set compatible microcontroller and allows for implementation of custom logic to accelerate functionality that is slow or problematic for 8-bit microcontrollers. XLR8 significantly improves performance in the same physical footprint as standard Arduino Uno and is programmed with the Arduino IDE. XLR8 also provides a great platform for learning the basics of FPGA design. (+)

      Features:

      342946750832273546.jpg
      • Faster Application Speeds
      • Higher Computational Performance
      • Customizable
  • Sabtech Industries  (3)
    • Swift PMC Parallel
      Fully MIL-STD-1397C Type D or E compliant (+)

      Features:

      • Full-duplex 32-bit NTDS transfers
      • Interrupt, PIO & DMA operation
      • Independent NTDS sink and source channels
    • Swift PMC Serial
      Fully MIL-STD-1397C Type D or E compliant (+)

      Features:

      • Full-duplex 32-bit NTDS transfers
      • Interrupt, PIO & DMA operation
      • Independent NTDS sink and source channels
    • Swift PCI
      MIL-STD-1397C Type A, B, C, and H compliant (+)

      Features:

      • Full-duplex 8 ,16 or 32-bit NTDS transfers
      • Interrupt, PIO & DMA operation
      • Independent NTDS input and output channels
  • Conduant Corporation  (1)
    • SNAP12 Optical FPGA Cardâ„¢
      SNAP12 Optical FPGA input/output board from Conduant is available for a wide variety of high-speed optical PCI-Express applications (+)

      Features:

      • Xilinx® Virtex 6â„¢ field programmable gate array (FPGA) for connecting ports and devices
      • performance rates up to 5 Gigabytes (GB) per second for 12 lanes in and 12 out simultaneously
      • 8 GB of high-speed DDR3 SDRAM
  • Spectrum Signal Processing  (2)
    • SDR-3000 SMRDP
      An "RF to Ethernet" wideband military communications (MILCOM) rapid-prototyping and development platform (+)

      Features:

      • Fully integrated, commercial-off-the-shelf (COTS) software defined radio platform
      • A “skinny” version of Spectrum's SDR-3000 MRDP providing a single-slot modem hardware solution
      • Integrates the latest Xilinx Virtex-4 Field Programmable Gate Array (FPGA) technology with Spectrum's proven MPC7410 PowerPC and TMS320C64x( digital signal processing technology
    • flexComm SDR-4000 WML
      Wireless Modem Lite (WML) (+)

      Features:

      • A lower power rugged package that supports the critical modem, link, and network layer processing functions necessary in a software defined radio
      • The Lite version reduces the power required per slot by supporting a selective feature set from Spectrum's SDR-4000 products
      • Specifically designed for tactical Military Communications (MILCOM) applications and provides black-side "IF to Ethernet" digitization and processing of complex waveforms
  • National Instruments  (2)
    • NI Single-Board RIO
      Single-Board RIO devices offer engineers and scientists a low-cost, integrated hardware option for deploying embedded control and data acquisition applications (+)

      Features:

      39115.jpg
      • The eight new sbRIO-96xx devices combine an embedded real-time processor, reconfigurable field-programmable gate array (FPGA) and analog and digital I/O on a single printed circuit board (PCB), making them ideal for applications that require flexibility, high-performance, and reliability in a small form factor
      • Engineers and scientists can use the NI LabVIEW graphical system design platform to customize NI Single-Board RIO hardware as well as develop all aspects of their embedded systems for increased productivity and shorter time to market
      • Single-Board RIO devices feature an industrial 266 MHz or 400 MHz Freescale MPC5200 processor built on Power Architecture technology, the Wind River VxWorks real-time operating system (RTOS), and Xilinx Spartan-3 FPGA
    • Single Board RIO-96xx
      Integrated real-time controller, reconfigurable FPGA, and I/O on a single board (+)

      Features:

      • Low-cost setup for high-volume OEM application
      • Up to 2M gate Xilinx Spartan-3 FPGA
      • Up to 400 MHz Freescale real-time processor
  • CSP Inc. (CSPI) MultiComputer Division  (1)
    • FastCluster XL-Gate
      The XL-Gate provides a Hybrid Computing Solution delivering the acceleration of Virtex-5 FPGAs and the optimized performance/power ratio of a MPC8641 General Purpose Processor (+)

      Features:

      43508.jpg
      • The reconfigurable XL-Gate FPGA payload supports Xilinx Virtex-5 LXT or SXT FPGA's (on an XMC Module)
      • FPGA development is simplified by the use of the CoreFire Design Suite, turning high-level data flow concepts into algorithms programmed for the XL-Gate FPGA board
      • Available in air-cooled or conduction cooled versions
  • XILINX, Inc.  (1)
    • Xilinx PCI
      Field programmable gate array solution for PCI and CompactPCI applications integrates a PCI interface with FIFOs and user-logic (+)

      Features:

      • PCI32, PCI64 and PCI X support
      • PCI32 design kit includes LogiCORE PCI32 Spartan cores
      • PCI prototyping board from Virtual Computer
  • Pentek, Inc.  (15 of 17)
    • Model 53741
      Model 53741 is a member of the Onyx® family of high-performance 3U VPX boards based on the Xilinx Virtex-7 FPGA. A high-speed data converter with a programmable digital down converter, it is suitable for connection to HF or IF ports of a communications or radar system. Its built-in data capture features offer an ideal turnkey solution. It includes a 3.6 GHz, 12-bit A/D converter and four banks of memory. In addition to supporting PCI Express Gen. 3 as a native interface, Model 53741 includes an optional connection to the Virtex-7 FPGA for custom I/O. Extendable IP Design: For applications that require specialized functions, users can install their own custom IP for data processing. Pentek GateFlow FPGA Design Kits include all of the factory installed modules as documented source code. Developers can integrate their own IP with the Pentek factory-installed functions or use the GateFlow Design Kit to completely FEATURES: Ideal radar and software radio interface solution � Supports Xilinx Virtex-7 VXT FPGAs � GateXpress supports dynamic FPGA reconfiguration across PCIe � One-channel mode with 3.6 GHz, 12-bit A/D � Two-channel mode with 1.8 GHz, 12-bit A/Ds � Programmable one- or twochannel DDC (Digital Downconverter) � 4 GB of DDR3 SDRAM � µSync clock/sync bus for multiboard synchronization � PCI Express (Gen. 1, 2 & 3) interface up to x8 � Optional user-configurable gigabit serial interface � Optional LVDS connections to the Virtex-7 FPGA for custom I/O � Compatible with several VITA standards including: VITA-46, VITA-48 and VITA-65 (OpenVPXTM System Specification) [...] (+)

      Features:

    • Model 71664
      Complete radar and software radio interface solution (+)

      Features:

      350817851861543515.jpg
      • PCIe output supports VITA 49.0 VITA Radio Transport (VRT) Standard
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Four 200 MHz 16-bit A/Ds
    • Jade Model 71841
      The 71841 is a high-speed data converter with programmable DDCs (digital downconverters). It is suitable for connection to HF or IF ports of a communications or radar system. Its built-in data capture feature offers an ideal turnkey solution as well as a platform for developing and deploying custom FPGA-processing IP. (+)

      Features:

      358739961569502530.jpg
      • Ideal radar and software radio interface solution
      • Supports Xilinx Kintex UltraScale FPGAs
      • One-channel mode with 3.6 GHz, 12-bit A/D
    • Model 52671
      Pentek Expands OpenVPX Product Line While Reducing Power Requirements and Costs (+)

      Features:

      239710539380849.jpg
      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Four 1.25 GHz 16-bit D/As
    • Model 7070
      The FlexorTM Model 7070 is a high-performance PCIe board based on the Xilinx Virtex-7 FPGA. As a stand-alone processor board, it provides an ideal development and deployment platform for demanding signal processing applications. (+)

      Features:

      311483911164971.jpg
      • VITA-57.1 FMC site offers access to a wide range of possible I/O
      • Supports Xilinx Virtex-7 VXT FPGAs
      • GateXpress supports dynamic FPGA reconfiguration across PCIe
    • Model 5973-324 for 3U VPX Model 7070-324
      FlexorSet Model 5973-324 for 3U VPX and Model 7070-324 for PCIe. They consist of the new Flexor Model 3324 4-Channel A/D & 4-Channel D/A FMC installed on either of two carriers. The carriers contain optimized Pentek FPGA intellectual property (IP) for A/D acquisition and D/A waveform playback, which is ideally matched to the four 500 MHz, 16-bit A/Ds and the four 1.5 GHz, 16-bit D/As with digital up-converters (DUCs) on the FMC. A rich set of software development tools enables rapid application development and rapid time to market. (+)

      Features:

      324106377621429115.jpg
      • Supports Xilinx Virtex-7 VXT FPGAs
      • GateXpress supports dynamic FPGA reconfiguration across PCIe
      • Four 500 MHz 16-bit A/Ds
    • Model 56661
      Model 56661 is a member of the Cobalt® family of high-performance AMC modules based on the Xilinx Virtex-6 FPGA.It includes four A/Ds and four banks of memory. In addition to supporting PCI Express Gen. 2 as a native interface, the Model 56661 includes a front panel generalpurpose connector for application-specific I/O. (+)

      Features:

      234015512525720626.jpg
      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Four 200 MHz 16-bit A/Ds
    • Model 52621
      3-Ch 200 MHz A/D w/ DDC & 2-Ch 800 MHz D/A w/ DUC, Virtex-6 FPGA - 3U VPX (+)

      Features:

      239710912284470.jpg
      • Complete radar and software radio interface solution
      • Supports Xilinx Virtex-6 LXT and SXT FPGAs
      • Three 200 MHz 16-bit A/Ds
    • 71851
      Jade family of data converter XMC modules. The Model 71851 is based on the Xilinx Kintex Ultrascale FPGA and features two 500 MHz, 12-bit A/Ds with multiband digital down converters (DDCs), one digital upconverter (DUC) and two 800 MHz 16-bit D/As. The Model 71851 offers a well-matched 200 MHz bandwidth on both the receive-side and on the transmit-side, which provides the complimentary solution necessary in many high-speed data acquisition, waveform generation, communications, satcom, UAV and radar applications (+)

      Features:

      3697998766215604825.jpg
      • The front end accepts two analog HF or IF inputs on front panel SSMC connectors with transformer-coupling into two Texas Instruments ADS5463 500 MHz, 12-bit A/D converters
      • A TI DAC5688 DUC (digital upconverter) and D/A accepts a baseband real or complex data stream from the FPGA and provides that input to the upconvert, interpolate and dual D/A stages
      • A/D Acquisition IP Modules: The Model 71851 features two A/D Acquisition IP modules for easily capturing and moving data. Each module can receive data from any of the two A/Ds or a test signal generator
    • Model 8266
      PC Development System for PCIe Cobalt Virtex-6 FPGA and Onyx Virtex-7 FPGA Boards (+)

      Features:

      233317817525306430.jpg
      • 4U 19-inch rackmount PC server chassis, 21-inch deep
      • 64-bit Windows® 7 Professional or Linux® workstation
      • Intel® CoreTM i7 3.6 GHz processor
    • 6826
      Dual 2 GHz, 10-bit A/D with Virtex-II FPGA VME/VXS (+)

      Features:

      34753.jpg
      • One or Two Atmel AT84AS008 10-bit, 2 GHz A/D converters
      • User-configurable Xilinx Virtex-II FPGA with 11 million gates, includes two PowerPC cores for creating complete application engines
      • High-speed FPDP II I/O data ports operate at up to 400 MBps
    • Model 71641
      The Model 71641, capable of digitizing one 12-bit channel at 3.6 GHz, or two channels at 1.8 GHz, comes preconfigured with a programmable one- or two-channel digital downconverter (DDC) loaded into the onboard Xilinx Virtex-6 FPGA. The new module is ideal for wideband radar and software defined radio (SDR) applications. (+)

      Features:

      224768458525428558.jpg
      • One-channel mode with 3.6 GHz, 12-bit A/D
      • Two-channel mode with 1.8 GHz, 12-bit A/Ds
      • Programable one- or twochannel DDC (Digital Downconverter)
    • Model 4207 PowerPC
      PowerPC VME/VXS I/O board targets high-performance I/O and processing applications (+)

      Features:

      • Offers powerful one-slot solutions with nearly unlimited connectivity
      • Freescale MPC8641 single or dual core PowerPC processor to 1.5 GHz
      • Xilinx Virtex-4 FX Series FPGA
    • Model 71624
      Model 71624 is a member of the Cobalt® family of high-performance XMC modules based on the Xilinx Virtex-6 FPGA. As an IF relay, it accepts two IF analog input channels, modifies up to 34 signals, and then delivers them to two analog IF outputs. Any signal within each IF band can be independently enabled or disabled, and changed in both frequency and amplitude as it passes through the module. (+)

      Features:

      311482266970829.jpg
      • Modifies 34 IF signals between input and output
      • Up to 80 MHz IF bandwidth
      • Two 200 MHz 16-bit A/Ds
    • 6826
      Dual 2 GHz, 10-bit A/D with Virtex-II Pro FPGA – VME/VXS board (+)

      Features:

      43333.jpg
      • One or two Atmel AT84AS008 10-bit, 2 GHz A/D converters
      • 200 MHz to 2 GHz sampling frequency
      • Xilinx Virtex-II XC2VP70 FPGA
  • Macraigor Systems, LLC  (1)
    • J-SCAN 2.1
      J-SCAN Version 2.1, the newest release of its high-speed, low-cost boundary-scan debug and programming tool. (+)

      Features:

      • This new technology allows circuit designers to facilitate early test development, thereby shortening the development cycle and prototyping process.
      • Version 2.1 of J-SCAN communicates to the target with a USB 2.0- and USB 1.1-compatible interface that runs in high speed or full speed modes.
      • This gives a performance increase of more than 10X compared to the previous version of J-SCAN. Additionally, J-SCAN 2.1 has full support for serial peripheral interface (SPI) Flash programming, supporting those systems using field-programmable gate arrays (FPGAs) and other embedded devices.
  • Nallatech  (3)
    • BenNUEY-VME
      Based on Xilinx Virtex-II Pro field programmable gate arrays (FPGAs) (+)

      Features:

      • Dedicated PowerPC processor units and increased memory
      • Makes full use of the Virtex-II Pro
      • Support for Gbit Ethernet, Infiniband and Fibrechannel, plus others through two SFP modules on the front-panel interfacing directly to the Virtex-II Pro
    • 385A
      The 385A™ is a half-height, half-length PCIe 3.0 card featuring Altera’s new floating-point enabled Arria 10 FPGA family capable of delivering 1.5 Peak TFlops of floating point performance. Two independent banks of SDRAM memory and dual QSFP+ network ports complete the balanced architecture capable of both co-processing and latency-critical 1G/10G/40G streaming applications. (+)

      Features:

      310452786761694178.jpg
      • Arria 10 FPGA
      • Delivering 1.5 Peak TFlops of floating point performance
      • Two independent banks of SDRAM memory
    • BenADC-V4
      Virtex-4/Quad 250 MSps Analog Capture Module (+)

      Features:

      31733.jpg
      • Suitable for applications requiring high-speed analog capture and the on-board FPGA
      • Combining an Xilinx Virtex-4 SX or LX FPGA, four high speed analog capture channels, and two banks of DDR-II SRAM, the module provides processing, analog I/O, and memory expansion capability
      • The high density of processing and analog capture enables systems to be implemented in less space and makes design implementation easier
  • GDA Technologies, Inc.  (1)
    • GRIO
      RapidIO controller IP cores (+)

      Features:

      • Fully compliant with the Serial and Parallel RapidIO specifications
      • Derived from the RapidIO technology-based controller design licensed from Freescale Semiconductor
      • Optimally supports Standard Cell, FPGA, and Gate Array
  • Sundance Multiprocessor Technology Ltd.  (2)
    • SMT351
      Embedded reconfigurable computing modules based on Xilinx Virtex-II Pro field programmable gate arrays (FPGA) (+)

      Features:

      • 1 GB of storage in DDR SDRAM (Samsung K4H511638B-GC/LB3 or Micron MT46V32M16FN -6)
      • Up to 400 MBps throughput rate
      • 32-bit data width
    • FC104
      A 1 GSps Digital Down Converter (DDC) IP core (+)

      Features:

      • Fully configureable core developed specifically for Xilinx FPGAs
      • Can be implemented on Sundance's SMT398, SMT388, and SMT368 FPGA-based reconfigurable computing platforms
      • Quad DDC architecture
  • Intilop  (1)
    • FPGA accelerator board with network
      Intilop’ full transmission control protocol (TCP) and user datagram protocol (UDP) accelerator with network security capability performs functions of firewall and other monitoring functions at full line rate. (+)

      Features:

      3694723438611344585.jpg
      • The full TCP/UDP offload (TOE) core performs protocol offload of all phases of TCP/Internet Protocol (IP) software in high-performance field-programmable gate arrays (FPGAs), without central processing unit (CPU) involvement.
      • The security module can be removed from the base-TOE core. These functions are performed in 100 nanoseconds at full 10G bps and 40G bps line rate with ultra-precision and zero jitter. [...]
  • Altium Limited  (1)
    • NanoBoard NB1
      An FPGA-based, nano-level breadboard (+)

      Features:

      • LiveDesign-enabled development board
      • Fully compatible with Altium's LiveDesign-enabled tools
      • Allows rapid and interactive implementation and debugging of FPGA designs
  • QuickLogic Corp.  (2)
    • QL8150 Eclipse II FPGAs
      FPGAs designed for light-density logic applications such as handheld devices (+)

      Features:

      30701.jpg
      • Ideal for fixed function interface controllers on VME basecards, PMC mezzanines, active backplanes, and chassis front panels
      • With 188,946 maximum gates and 640 logic cells in a 32 x 32 logic array, this 8x8 mm footprint BGA package uses only 196 fine pitch balls
      • Operating temperature range of -40 °C to +100 °C [...]
    • PolarPro FPGA Family
      A family of ultra low-power FPGAs (+)

      Features:

      24991.jpg
      • Draws less than 10 uA of standby current
      • Exhibits both ASIC-like power consumption and the flexibility of field programmable logic
      • Provides advanced power management features ideal for power sensitive applications
  • RTD Embedded Technologies, Inc.  (1)
    • Digital I/O Controllers
      Bit or byte programmable advanced digital I/O (aDIO) (+)

      Features:

      30238.jpg
      • RTD provides a wide array of controller modules with aDIO, user programmable timer/counters, PWMs, incremental encoders, MOSFETs, opto-isolation, relays, high speed PCI FPGAs, and ISA FPGAs
      • The inputs are designed to protect the computer and the outputs to provide high isolation with high current and/or voltage capability
      • Digital inputs are opto-isolated or diode protected and outputs are opto-isolated, relay contact, or MOSFET
  • Actel Corporation  (5)
    • M7Fusion
      An ARM-enabled Actel Fusion Programmable System Chip (PSC) (+)

      Features:

      • Enables designers to integrate a wide range of functionality into a monolithic device, including support for +/-12V analog I/O, up to 8 Mb of embedded flash memory, integrated ADC, and up to 1.5M system gates of programmable logic fabric
      • Does not require additional system components such as configuration serial nonvolatile memory (EEPROM) or a flash-based microcontroller to load the device configuration data at every system power-up
      • No power-on current surge and no high-current transition
    • SmartFusion FPGA
      ARM Cortex-M3 core running at 100 MHz (+)

      Features:

      44591.jpg
      • 60K to 500K FPGA gate field with 350 MHz clocking
      • Analog Compute Engine that provides sequencing and computation up to three 12-bit ADCs and three 12-bit DACs [...]
    • SmartFusion FPGA
      ARM Cortex-M3 core running at 100 MHz (+)

      Features:

      46604.jpg
      • 60K to 500K FPGA gate field with 350 MHz clocking
      • Analog Compute Engine that provides sequencing and computation up to three 12-bit ADCs and three 12-bit DACs [...]
    • RTAX4000S
      A member of the rad-hard RTAX-S FPGA family (+)

      Features:

      • MIL-STD-883 Class B versions of the 4,000,000 gate RTAX4000S are now available
      • Error-corrected onboard memory obviates the need for the Triple-Module Redundancy (TMR) usually mandated by FPGA architectures
      • RTAX4000S has completed 1,000 hours of High-Temp Operating Life (HTOL) testing and nearly 80,000 total life test hours to date, while the entire RTAX-S family has completed more than 2,000,000 device testing hours [...]
    • Actel Fusion PSC
      Actel Fusion PSC mixed-signal FPGA, integrates analog, Flash memory blocks, clock generation, management circuitry, high performance programmable logic in a monolithic device. (+)

      Features:

      31934.jpg
      • High Performance Reprogrammable Flash Technology
      • Advanced 130-nm, 7-Layer Metal, Flash-Based CMOS Process
      • Nonvolatile, Retains Program When Powered-Off
  • Mesa Electronics  (12)
    • 5I22
      A general-purpose programmable industrial I/O card for the PCI bus (+)

      Features:

      37897.jpg
      • Uses a 1M or 1.5M gate Xilinx FPGA for all logic
      • "Anything I/O" card
      • FPGA configuration is downloadable from the PCI bus side, allowing creation of almost any kind of specialized I/O function
    • 5I23
      General purpose programmable I/O card for the PCI bus (+)

      Features:

      35524.jpg
      • Uses a 400K gate Xilinx FPGA for all logic
      • FPGA configuration is downloadable from the PCI bus side, allowing creation of almost any kind of specialized I/O function
      • Uses three 50 pin connectors with I/O module rack compatible pin-outs and interleaved grounds
    • MESA 4I68
      An FPGA-based PC104-Plus “anything I/O” card (+)

      Features:

      30424.jpg
      • Programmable I/O card for the PCI bus
      • Uses a 200K or 400K gate Xilinx Spartan3 FPGA for all logic
      • FPGA configuration is downloadable from the PCI bus side, allowing creation of almost any kind of specialized I/O function
    • 5I22 PCI
      General purpose programmable I/O card for the PCI bus (+)

      Features:

      38191.jpg
      • Uses a 1 or 1.5M gate Xilinx FPGA for all logic, so it is truly an anything I/O card
      • Uses 1M or 1.5M gate Xilinx FPGA
      • All I/O bits are 5 V tolerant
    • 7I70
      The MESA 7I70 is a 48 point remote isolated field input card designed for fast real time PC based control systems. The 7I70 is suited for high performance industrial automation and machine tool applications. (+)

      Features:

      18831833599881065.jpg
      • Communicates with the host with a robust isolated RS-422 link.
      • communicates with the host with a robust isolaStandard CAT5 cables are used for wiring convenience
      • Supported by Mesa's low cost FPGA cards which present a simple parallel register interface to the host, with all protocol details handled by the smart interface. One FPGA card can support up to 32 external devices and up to 3072 control points while still maintaining a 10 kHz service rate for all points.
    • 7I43 -
      Low cost, general purpose programmable I/O card that connects to the host computer via USB or PC parallel port (+)

      Features:

      • Xilinx FPGA-based I/O card
      • Low cost
      • 200 K or 400 K gate FPGA
    • 4I39
      General purpose programmable I/O card for the PC/104 bus (+)

      Features:

      38379.jpg
      • Eight full duplex RS-422 channels
      • 10 Mb/S RS-422 data rate
      • RS-422 has galvanic isolation 200K gate FPGA
    • 4I38
      A general purpose programmable I/O card for the PC/104 bus (+)

      Features:

      • Uses a 1M or 1.5M gate Xilinx Spartan 3 FPGA for all logic
      • FPGA can be configured from the PC/104 side or can be configured automatically at power up via the on card serial flash EEPROM
      • All PC/104 lines are connected to the FPGA, allowing the 4I38 to be used as a PC/104 bus master or for testing PC/104 cards
    • 4I68
      FPGA-based anything I/O for PC/104-Plus bus (+)

      Features:

      • 400K gate Xilinx Spartan3 FPGA
      • Uses a bus mastering PCI bridge to give the card the ability to work with 5 V and 3.3 V PCI buses
      • Supports high FPGA/PCI bus transfer rates
    • 4I34
      A programmable I/O card for the PC/104 bus (+)

      Features:

      • Uses a 100K or 200K gate Xilinx FPGA for logic
      • Downloadable from the PC/104 bus side, allowing creation of specialized I/O functions
      • 64-channel event capture card
    • 5I21 - FPGA BASED
      A programmable serial interface card for the PCI bus (+)

      Features:

      31102.jpg
      • Supports up to 12 full duplex RS-422 or half duplex RS-485 serial links with baud rates up to 10 M baud
      • The 5I21 uses a 400K gate Spartan3 FPGA and a bus mastering PCI bridge for high performance
      • Since all serial logic is FPGA-based, almost any RS-422/RS485 protocol can be supported
    • 7I60
      A standalone (no bus) version of the FPGA-based Anything I/O card series (+)

      Features:

      • Provides 96 I/O bits and four serial ports
      • Two RS-232 ports and two RS-485 ports
      • On-card Flash EEPROM for FPGA configuration
  • Joerger Enterprises, Inc.  (4)
    • VME-M
      INTELLIGENT VME MASTER CARD (+)

      Features:

      30075.jpg
      • MOTHER/DAUGHTER INTELLIGENT VME MODULE
      • VME64x COMPATIBLE
      • ACCEPTS FOUR DAUGHTERCARDS
    • MODEL AWG125/14
      A daughtercard featuring two independent 125 MHz, 14-bit arbitrary waveform generators offering low-voltage glitch outputs (+)

      Features:

      • Mounts on a VME-M series motherboard
      • Can provide up to eight independent arbitrary waveform generators on single VME card
      • Motherboard provides FPGA, two 512k x 16 bit SRAMs, connectors, bus and control functions
    • MODEL ADC4/14
      A daughtercard featuring four, individual 14 bit ADCs (+)

      Features:

      • Mounts on a VME-M motherboard and is available at speeds of 25, 80 and 125 MHz
      • Mounts on a VME-M series motherboard
      • Can provide 16 independent analog digitizers on single VME card
    • MODEL ADC125/16
      A daughtercard featuring two independent 125 MHz, 16 bit ADCs, designed for undersampling, featuring a clock driver with a PLL and VC (+)

      Features:

      • Mounts on a VME-M series motherboard
      • Motherboard provides FPGA, two 512k x 16-bit SRAMs, connectors, bus and control functions
      • Provides up to eight high-performance ADCs on a single-width VME module
  • Athena Group  (1)
    • D2 Board
      A PC-hosted development board containing one 'C6211/'C6711 DSP and two Altera APEX FPGAs (400/600/1000/1500K gate densities available) (+)

      Features:

      • 256 Kbytes of SRAM
      • 64 Mbytes of SDRAM
      • 53-Gbit/sec I/O
  • Avnet Memec  (1)
    • Design\IP Support
      Helps specify, develop, and design FPGAs by serving as an extension of a design team (+)

      Features:

      33652.jpg
      • Provides the additional resources and knowledge base during the critical implementation phase, so customers can meet aggressive time-to-market milestones
      • Offers a wide set of Intellectual Property (IP) cores Avnet Memec has locations across North America and features FPGAs from Actel. Avnet Memec's factory trained and certified Field Applications Engineers are readily available to support all of your design requirements. [...]
  • Digilent Inc.  (2)
    • Basys
      Circuit design platform for anyone who wants to learn about FPGAs and digital circuit design (+)

      Features:

      38301.jpg
      • Xilinx Spartan3-E FPGA, 100K, or 250K gate featuring 18-bit multipliers, 72 Kb of fast dual-port block RAM, and 500 MHz+ operation
      • USB 2 port for FPGA configuration and data transfers (software available as a free download)
      • XCF02 platform flash ROM that stores FPGA configurations indefinitely
    • Nexys2
      Powerful digital system design platform built around an Xilinx Spartan3E FPGA (+)

      Features:

      • 16 Mb of fast SDRAM and 16 Mb of flash ROM
      • Xilinx Spartan3E FPGA, 500K or 1,200K gate
      • USB2 port providing board power, device configuration, and high-speed data transfers
  • Dynamics Research Corporation  (1)
    • Killer VMEPCI-OR120
      A Motorola DSP56301-based highly-configurable processor board (+)

      Features:

      • VME64 interface
      • Tundra Universe VME-to-PCI bridge
      • 33 MHz PCI local bus
  • RPA Electronics Design, LLC  (1)
    • FIO series
      A PC/104+ card (+)

      Features:

      • 32-bit, 33 MHz PCI interface
      • 1K bidirectional FIFO
      • Altera 10 Kbyte FPGA
  • Mentor Graphics Corporation  (0)
05/20/19 03:47
Close

Subscribe to FPGA updates