FPGA

Showing results for: fpgas
Refine FPGA companies and products:
field-programmable gate array fpga fpgas
Click on any vendor
to see a listing of
fpgas related products.
  • Macraigor Systems, LLC  (2)
    • J-SCAN 2.1
      J-SCAN Version 2.1, the newest release of its high-speed, low-cost boundary-scan debug and programming tool. (+)

      Features:

      • This new technology allows circuit designers to facilitate early test development, thereby shortening the development cycle and prototyping process.
      • Version 2.1 of J-SCAN communicates to the target with a USB 2.0- and USB 1.1-compatible interface that runs in high speed or full speed modes.
      • This gives a performance increase of more than 10X compared to the previous version of J-SCAN. Additionally, J-SCAN 2.1 has full support for serial peripheral interface (SPI) Flash programming, supporting those systems using field-programmable gate arrays (FPGAs) and other embedded devices.
    • J-Scan Debugging and Programming Tool
      Accelerates development cycle and prototyping process (+)

      Features:

      20868.jpg
      • Instantly programs IC devices, FPGAs, and CPLDs [...]
  • Nallatech  (15 of 18)
    • BenNUEY-VME
      Based on Xilinx Virtex-II Pro field programmable gate arrays (FPGAs) (+)

      Features:

      • Dedicated PowerPC processor units and increased memory
      • Makes full use of the Virtex-II Pro
      • Support for Gbit Ethernet, Infiniband and Fibrechannel, plus others through two SFP modules on the front-panel interfacing directly to the Virtex-II Pro
    • FPGA Accelerated Compute Node
      The Nallatech® FPGA Accelerated Compute Node® allows you to drive the most demanding HPC, data visualization and rendering workloads with a flexible, extremely dense 1U rack server optimized for accelerators. (+)

      Features:

      333267492491112286.jpg
      • High Density 1U Rack Server with (2) Intel Xeon Processors
      • (4) Nallatech 510T Cards with (8) Latest- Generation Altera / Intel Arria 10 FPGAs
      • OpenCL Programming Support
    • BenNUEY-PCI-104-V4
      PCI-104 FPGA Computing Processor Card (+)

      Features:

      31729.jpg
      • FPGA computing stack that provides a powerful platform for high-performance embedded systems development and deployment in production environments across a variety of applications including signals intelligence, avionics, Software Defined Radio, and autonomous vehicles
      • This solution is suitable for SWAP constrained real time embedded applications
      • An on-board Virtex-4 FX FPGA provides the ideal balance of resources for processing and system management, whilst three DIME-II expansion slots allow users to optimize system resources to meet processing, memory, and I/O requirements
    • Benadic
      A CompactPCI 14-bit ADC motherboard (+)

      Features:

      • Operates at 80 Mbytes/sec with 250Mhz bandwidth for high-performance applications
      • 20 channels integrated into a Xilinx FPGA network
      • Each of the 20 ADCs supports either single-ended or differential analog input. Each FPGA contains a 128Mbyte bank of SDRAM that allows storage of digitized data from each of the ADCs
    • BenNUEY-VME64-VXS
      6U VME64-VXS FPGA Computing Card (+)

      Features:

      • Provides a powerful platform for high-performance systems development and deployment in production environments
      • Using DIME-II expansion modules, the BenNUEY-VME64-VXS can support multiple analog and digital I/O interfaces, memory types, and up to seven user FPGAs on a single PCI card
      • Can be combined with DIMEtalk for easy connectivity implementation and FUSE for host integration [...]
    • BenDATA-II
      Combines the Virtex-II Pro FPGA from Xilinx with the flexibility of both onboard SRAM and DDR SDRAM (+)

      Features:

      • High bandwidth off-module communication is provided through the multi-Gbps bandwidth of the DIME-II motherboard connections in addition to eight Rocket I/O connections
      • Suitable for high-performance FPGA computing applications
      • The Virtex-II Pro FPGA on the BenDATA-II is offered from 2VP70 to 2VP125
    • Benera
      CompactPCI DIME-II motherboard with Xilinx Virtex FPGAs (+)

      Features:

      • 64-bit/33MHz PCI interface
      • PCI master DMA engine capable of 266 Mbytes/sec PCI burst transfers
      • Four DIME-II module slots
    • BenBLUE-V4
      Dual Virtex-4 and SRAM module (+)

      Features:

      • Two onboard Xilinx Virtex-4 User FPGAs
      • Two Virtex-4 LX100 or LX160
      • Up to 300k+ logic cells per module
    • BenONE-PCI-104
      FPGA processing capability in PCI-104 form factor (+)

      Features:

      • Access to Nallatech's full range of DIME-II FPGA modules for FPGA processing, memory, and analog and digital I/O
      • Supporting Xilinx Virtex-4, Virtex-II Pro and Virtex-II FPGAs through the DIME-II module range
      • Includes embedded PCI interface for communicating with host SBC
    • VXS-620 FPGA
      FPGA and PowerPC VXS multiprocessor (+)

      Features:

      42875.jpg
      • Designed to meet the signal processing needs of modern signal intelligence, software defined radio, and radar applications
      • The VXS-620 is the latest product to be introduced to the highly successful Nallatech REVX Series of rugged embedded processing solutions
      • The VXS-620 features an onboard Xilinx Virtex-5 FPGA for the implementation of high performance DSP applications
    • PCIe-287N
      The PCIe-287N network accelerator card delivers the processing and I/O performance required to develop and deploy solutions in a range of application areas including network processing, cyber security and algorithm acceleration (+)

      Features:

      • Two Xilinx Kintex-7 K325T user FPGAs
      • PCI Express 2.0 form factor
      • Four SFP+ ports supporting a range of 1G and 10G protocols including 10GbE (LAN and WAN)
    • PCIe-280
      An 8-lane PCI Express 2.0 FPGA accelerator card boasting the highest sustained host bandwidth available on the market (+)

      Features:

      45089.jpg
      • Customers deploying the PCIe-280 can increase application performance by harnessing up to 5GByte/sec of sustained host bandwidth
      • The PCIe-280 is the latest product to be introduced to Nallatech's highly successful Embedded PCI Series of FPGA COTS solutions and is targeted at signal intelligence, network security and algorithm acceleration applications
      • The PCIe-280 features an onboard Xilinx Virtex-5 user FPGA directly coupled to a high bandwidth, flexible memory configuration that includes ECC and parity protection
    • Virtex-4 XtremeDSP Development Kit
      A development platform for Xilinx Virtex-4 FPGAs that provides integration into the Xilinx System Generator for DSP development tool (+)

      Features:

      21238.jpg
      • Equipped with a SX35 Virtex-4 FPGA, which has 192 XtremeDSP slices, 3,456 Kb internal RAM, and 15,360 logic slices
      • Includes the dual mode BenONE DIME II USB and PCI motherboard populated with a BenADDA-V4 DIME-II module
      • Four high-performance analog interfaces, consisting of two 14-bit, 105 MHz ADC channels and two 14-bit, 160 MSPS DACs
    • BenADC-V4
      Virtex-4/Quad 250 MSps Analog Capture Module (+)

      Features:

      31733.jpg
      • Suitable for applications requiring high-speed analog capture and the on-board FPGA
      • Combining an Xilinx Virtex-4 SX or LX FPGA, four high speed analog capture channels, and two banks of DDR-II SRAM, the module provides processing, analog I/O, and memory expansion capability
      • The high density of processing and analog capture enables systems to be implemented in less space and makes design implementation easier
    • BenADDA-V4
      Virtex-4, Dual 105 MSps ADC, Dual 160 MSps DAC DIME-II Module (+)

      Features:

      31732.jpg
      • Suited for applications requiring high-speed analog capture and the processing performance of an on-board FPGA
      • Combining an Xilinx Virtex-4 SX or LX FPGA, two analog input channels, two analog output channels, and two banks of DDR-II SRAM, the module provides processing, analog I/O, and memory expansion capability
      • The direct coupling and high density coupling of processing, memory in less space makes design implementation easier [...]
  • GE Intelligent Platforms, Inc.  (11)
    • Tsunami PC104
      A Field Programmable Gate Array (FPGA) processor for PC/104-Plus systems (+)

      Features:

      17251.jpg
      • Integrates with the Wave FPGA software tool kit from SBS for easy application development
      • Suitable for mobile cart-based systems, machine sensor, and control I/O applications
      • Altera Stratix FPGAs on a 32-bit/33-MHz PCI interface with memory and high-bandwidth data paths
    • Tsumani 6U CPCI Development Kit
      FPGA processor solution targeted at high performance software defined radio applications (+)

      Features:

      • Dual Stratix EP1S80 FPGAs are tightly coupled to provide a power platform for signal processing
      • Two PMC module sites provide I/O connectivity to either front panel or back panel connections
      • A direct high bandwidth 1 GBps path from the PMC P4 connector directly to the FPGAs
    • TS-CPCI-8001
      High-performance, FPGA-based computing platform for demanding signal and image processing applications (+)

      Features:

      21058.jpg
      • Suitable for SDR, sonar, and other high-performance signal processing applications
      • Dual Stratix EP1S80 FPGAs onboard
      • Two PMC sites with 1 GBps high-speed data paths to each FPGA
    • TS-CPCI-8002
      Dual EP1S80-C5 FPGA (+)

      Features:

      • Two 64/66 MHz PMC sites
      • Two 64 MB SDRAM
      • 2 MB SRAM
    • CompactPCI FPGA Processor
      Two Stratix EPS180 FPGAs (+)

      Features:

      19198.jpg
      • Two PMC sites with 1-GBps high-speed data paths to each FPGA
      • 8-GBps connection between FPGAs for a common processor fabric
      • Local bridges route 64-bit/66-Mhz CompactPCI backplane to PMC and FPGA local buses
    • 6U CPCI FPGA Processor
      Two Stratix™ EPS180 FPGAs (+)

      Features:

      19051.jpg
      • Two PMC sites with 1 GB high-speed data paths to each FPGA
      • 8-GB connection between FPGAs for a common processor fabric
      • Local bridges route 64-bit/66-MHz CompactPCI backplane to PMC and FPGA local buses
    • PCI-based FPGA processor
      Tsunami A40 delivers many times the processing of CPU or DSP boards (+)

      Features:

      19197.jpg
      • Altera EP1S40 FPGA on the PCI and expansion module(s)
      • 4 MB SRAM and 1 GB SDRAM on the A40 PCI base board
      • 8 MB SRAM and 384 MB SDRAM on A40 FPGA expansion modules
    • V4DSP
      A COTS FPGA multiprocessor designed for rugged defense and aerospace applications (+)

      Features:

      36792.jpg
      • Two Xilinx Virtex-4 FX100 FPGAs
      • QDR SRAM 2M x 36 bits
      • DDR2 SDRAM 2 banks 64M x 16 or 1 bank 64M x 32 bits per node
    • Xilinx FPGA Blade
      PCI Software Radio Xilinx FPGA blade (+)

      Features:

      33584.jpg
      • GE Intelligent Platforms radio PMC products integrated with Virtex-II based FPGA PMC module to supplement the onboard FPGA
      • Single-slot solution
      • Large onboard memory
    • TS-104-3001
      PCI/104 format for cost effective solutions (+)

      Features:

      • Tsunami Development Kit gets you up and running on an FPGA Computing platform in less than an hour
      • Wave FPGA Tool Kit provides API, drivers, source code, and more
      • 32 bit/ 33 MHz PCI bus provides maximum bandwidth to host resources [...]
    • ICS-572
      2-channel ADC, 2-channel DAC with Xilinx FPGA SDRAM, QDR SRAM, and PCI 64/66 interface (+)

      Features:

      33579.jpg
      • 2-channel Software Radio
      • Receive and transmit on a single PMC
      • Sample rates: ADC 105 MHz, DAC 200 MHz
  • Sundance Multiprocessor Technology Ltd.  (13)
    • SMT351
      Embedded reconfigurable computing modules based on Xilinx Virtex-II Pro field programmable gate arrays (FPGA) (+)

      Features:

      • 1 GB of storage in DDR SDRAM (Samsung K4H511638B-GC/LB3 or Micron MT46V32M16FN -6)
      • Up to 400 MBps throughput rate
      • 32-bit data width
    • Series 1
      Melds FPGAs, PowerPC440, and PCI Express on the small form factor (+)

      Features:

      46827.jpg
      • Highly suited for the image processing, high-speed data acquisition, and communication arenas
      • Xilinx Virtex-5 FPGAs for its two versions: The SMT100 featuring 512 MB DDR2 SDRAM (good for data processing and buffering), and the SMT105, offering a mixture of memory banks in the DDR2 SDRAM and QDR2 SRAM camps to facilitate signal processing in real time
      • I/O: MicroSD/Transflash, USB 2.0 FPGA interface, fiber-optic modules, and RS-232 interfaces
    • SMT340
      Converts and feeds radio frequencies directly into either a digital delay line module, a digital down converter, or a processing module with DSPs/FPGAs without delays or corruption of the data (+)

      Features:

      • Can integrate into TIM-40 compatible host carriers as well as VXI, VMEbus, or CompactPCI systems with either more TMS320C4x or TMS320C6x to do digital radio processing
      • Features include single width TIM, TIM standard compatible, 41 MSamples/sec 12-bit AD9042 ADCs, two independent channels, direct data interfaces, 80 dB dynamic range, optional CommPort data interface, 68 dB SNR [...]
    • FC104
      A 1 GSps Digital Down Converter (DDC) IP core (+)

      Features:

      • Fully configureable core developed specifically for Xilinx FPGAs
      • Can be implemented on Sundance's SMT398, SMT388, and SMT368 FPGA-based reconfigurable computing platforms
      • Quad DDC architecture
    • SMT7005
      Four C6201 200MHz DSPs 16MB SDRAM & 512KB SBSRAM of private memory for each DSP Up to 800Mbytes/s I/O bandwidth per DSP Optional shared memory interface for each DSP (+)

      Features:

      13821.jpg
      • Optional 'C4x ComPort Interface
      • Windows Driver software for 9x/NT
      • Driver development kit available for other O/S
    • SMT365
      Single width module (+)

      Features:

      • 600 MHz TMS320C6414 Fixed Point DSP
      • 4800 MIPS peak performance
      • Xilinx Virtex II FPGAs. XC2V1000-4 in FF896 package
    • SMT3311
      A CompactPCI FPGA board with five Altera APEX-600E FPGAs, ZBT SRAM, and Sundance Digital Bus (SDB) backplane on J3 (+)

      Features:

      • 128-point to 1 million-point FFT engine radar sonar
      • 16-bit complex input data format
      • 32-bit blocked floating-point output data format, extendable to 64 bits
    • SMT7006
      Four C6701 167MHz DSPs (+)

      Features:

      13822.jpg
      • 16MB SDRAM & 512KB SBSRAM of private memory for each DSP
      • Over 800Mbytes/s I/O bandwidth per DSP using Sundance Digital Bus and Datapipe Links
      • Optional shared memory interface for each DSP
    • EMC2-7A100
      The EMC2-7A100 can use commercial, industrial or automotive graded Artix-7 FPGAs and is complimented with 1Gbyte of DDR3 local storage, 32Mbytes of Flash memory for storage/configurations and has 68x free differential I/O pins which are routed to a VITA57.1 FMC-LPC high-speed connector for bespoke interfaces. The four-lane Multi Gigabit serial Transceivers (MGT) are coupled to a PCI switch for infinite scalability, the FMC-LPC and a SATA connector on the PC/104 stack to connect to local storage or for direct high-speed connection to stacked EMC2 boards. (+)

      Features:

      360546689851213799.jpg
      • PCIe/104 OneBank FPGA I/O Board
      • XC7A100, Speed Grade -2 FPGA on a SoM Module
      • 1Gbyte DDR3 and 32Mbytes of Flash Memory
    • EMCÂ-7A100 – PC/104 ONEBANK I/O BOARD
      The EMC2-7A100 can use commercial, industrial or automotive graded Artix-7 FPGAs and is complimented with 1Gbyte of DDR3 local storage, 32Mbytes of Flash memory for storage/configurations and has 68x free differential I/O pins which are routed to a VITA57.1 FMC-LPC high-speed connector for bespoke interfaces. The four-lanes MGT (multi gigabit serial transceivers) are coupled to a PCI switch for infinite scalability, the FMC-LPC and a SATA connector on the PC/104 stack to connect to local storage or for direct high-speed connection to stacked EMC2 boards. (+)

      Features:

      311393747409778.jpg
      • PCIe/104 OneBank FPGA I/O Board
      • XC7A100, Speed Grade -2 FPGA on a SoM Module
      • 1Gbyte DDR3 and 32Mbytes of Flash Memory
    • SMT406
      A Tangor FPGA-based processor PMC module (+)

      Features:

      • Tangor processing engine uses a Xilinx Virtex-II from 2V4000 to 2V10000 FPGA as the processing component
      • 128 MB of 133 MHz SDRAM, controlled by the PCI controller and accessible from both the PCI bus and the FPGA
      • Four banks of 4 MB each 200 MHz DDR SRAM connected to the FPGA
    • SMT377
      XC2v1000 FPGA (+)

      Features:

      • 1 Mbyte of ZBT RAM
      • Global Bus Technology
      • Eight channels of DAC outputs
    • SMT358
      Single-width module (+)

      Features:

      • Virtextm range of FPGA devices as user programmable resource
      • 1M Gates equivalent or more of software configurable resource
      • 4 banks of 1M x 18 of high-speed ZBT SRAM
  • Intilop  (1)
    • FPGA accelerator board with network
      Intilop’ full transmission control protocol (TCP) and user datagram protocol (UDP) accelerator with network security capability performs functions of firewall and other monitoring functions at full line rate. (+)

      Features:

      3694723438611344585.jpg
      • The full TCP/UDP offload (TOE) core performs protocol offload of all phases of TCP/Internet Protocol (IP) software in high-performance field-programmable gate arrays (FPGAs), without central processing unit (CPU) involvement.
      • The security module can be removed from the base-TOE core. These functions are performed in 100 nanoseconds at full 10G bps and 40G bps line rate with ultra-precision and zero jitter. [...]
  • National Semiconductor  (6)
    • DS64EV400 Equalizer
      Compensates for transmission medium losses and reduces deterministic jitter for four data transmission channels (+)

      Features:

      • Provides 20 dB of boost to equalize up to 10 m of CAT5 cable, up to 40 inches of FR-4 printed circuit board (PCB) at data transmission rates up to 6.4 Gbps and up to 30 inches of FR-4 at data rates up to 10 Gbps -- with only 0.175 units interval (UI) of residual jitter at the equalizer output
      • Inactive channels can be automatically shutdown for further power savings of 85 percent per channel
      • Field-programmable gate arrays (FPGAs) and transmission media
    • NSC Ref Designs
      Six new reference designs from National Semiconductor Corp. enable products that consume less power, extend battery life and generate less heat (+)

      Features:

      • PowerWise reference designs combine energy-efficient devices and arrange them in a system to actively lower power consumption and reduce heat dissipation
      • Each proven PowerWise reference file kit includes applicable design schematic, bill of materials (BOM), board layout, firmware, design documentation and field-programmable gate array (FPGA) source code in synthesizable Verilog or VHDL
      • The designs address a wide range of applications including portable, lighting, solar, industrial, medical, communications infrastructure, and test and measurement. For more information on these reference designs, visit www.national.com/refdesign
    • LMH0384
      National Semiconductor Introduces Industry's Lowest Jitter 3-Gbps SDI Equalizer (+)

      Features:

      • The LMH0384 simplifies the design of broadcast video routers, production switchers, distribution amplifiers, editing and conversion equipment. Tighter jitter budgets translate to cleaner system design, fewer bit errors and crisper images
      • The energy-saving LMH0384 offers the industry's lowest output alignment jitter across cable lengths allowing hardware designers more headroom for designing within system jitter budgets.Tighter jitter budgets translate to cleaner system design, fewer bit errors and crisper images
      • The LMH0384 is the only EQ to guarantee less than 0.3 unit intervals (UI) of output jitter from zero to 110m of Belden 1694A coaxial cable at 2.97-Gbps. It equalizes up to 140m of cable at 3G rates, 200m at high-definition (HD) rates and 400m at standard-definition (SD) rates
    • ADC16DV160
      The ADC16DV160 is the first dual-channel 16-bit, 160 MSPS pipeline ADC (+)

      Features:

      42697.jpg
      • It's targeted at multi-carrier, multi-standard GSM/EDGE, WCDMA, LTE, and WiMAX wireless basestations
      • The ADC16DV160 consumes less than half the power per ADC channel (650 mW) compared to competing single-channel 16-bit 160-MSPS pipeline ADCs, while offering the largest input-bandwidth (1.4 GHz) and the industry's best dynamic performance at high input frequencies
      • The ADC16DV160 delivers 91.2 decibels full scale (dBFS) spurious-free dynamic range (SFDR), 76.3 dBFS signal-to-noise ratio (SNR) and 97.3 dBFS higher-order harmonic distortion at 197 MHz input frequency
    • FPGA Power Designer
      Helps designers create complete FPGA power supply designs in minutes (+)

      Features:

      46683.jpg
      • Models and optimizes power supplies for FPGAs quickly
      • Includes detailed supply requirements of more than 130 of the newest FPGA devices from Altera, Xilinx and others
      • Incorporates comprehensive power requirements published by each FPGA manufacturers
    • ADC10D1000
      16-bit ADC and DVGA (+)

      Features:

      • Enable a new class of multi-carrier GSM and multi-carrier, multi-standard wireless base stations
      • Spurious-Free DynamicRange (SFDR) performance with 90.6 decibels full scale (dBFS) for a 160 MHz input frequency, and 87 dBFS guaranteed
      • ADC provides unmatched high-order harmonic distortion performance at any input frequency
  • Curtiss-Wright  (15 of 21)
    • FPE650 FPGA VPX
      A quad FPGA processor card which combines high bandwidth I/O, achieved through VPX/VPX-REDI and FMC/VITA 57 sites (+)

      Features:

      36805.jpg
      • Designed for the most demanding digital signal processing applications such as electronic counter measures, signal intelligence, and electro-optics
      • Four Xilinx LXT, SXT, or FXT Virtex-5 FPGAs
      • 4x Xilinx Virtex-5 FPGAs (SX95T, LX155T, FX100T)
    • FPE-320 3U VPX Processor Board
      The FPE320 is a 3U VPX FPGA processor board that incorporates the largest Xilinx Virtex-5 FPGAs available with an FPGA Mezzanine Card (FMC) site (+)

      Features:

      46493.jpg
      • Providing many resources in a small, rugged form factor, the FPE320 is the ideal FPGA platform for 3U systems that need to acquire analog and other high-speed I/O, or that need a large FPGA processor
      • At the heart of the FPE320's processing is a Xilinx Virtex-5 FF1738 package FPGA, the largest FPGA in the Virtex-5 family
      • FPGAs provide parallel processing capabilities that can be used to reduce processor count and system size
    • CHAMP-FX2 VPX FPGA & MPC8641D Processor
      A 6U VPX-REDI/VPX/OpenVPX hybrid processor (+)

      Features:

      • Two Xilinx Virtex-5 LX110T/LX220T FPGAs
      • Freescale MPC8641/8641D processor @ 1.0 GHz
      • XMC site
    • HPE720
      6U VPX Hybrid Processing Engine with a MPC8641D and dual Xilinx Virtex-5 FPGAs (+)

      Features:

      • Single or dual-core Freescale MPC8641D processor at 1.0/1.25/1.33 GHz
      • Dual Xilinx Virtex-5 FPGAs (LX110/220/330T, SX240T, or FX200T options)
      • Dual FPGA Mezzanine Card (FMC/VITA 57) sites or 1 FMC and 1 XMC/PMC site
    • CHAMP-FX2
      The CHAMP-FX2 is Curtiss-Wright's next-generation FPGA-based computing platform utilizing a 6U VPX-REDI form factor (+)

      Features:

      • Two Xilinx Virtex-5 Platform FPGAs (LX110T, LX220T, or LX330T)
      • 512 Mbytes or 1 GB DDR2 SDRAM per FPGA in two banks (1-2 Gbyte total on-board), 4.4 GBytes/sec peak bandwidth per FPGA
      • 36 Mbytes QDR-II+ SRAM per FPGA in four banks (72 Mbytes total on-board), 8.8 GBytes/sec peak bandwidth per FPGA
    • CHAMP-FX4 6U OpenVPX Xilinx Virtex-7 FPGA Processor Card
      The CHAMP-FX4 is the flagship 6U product in Curtiss-Wright Defense Solutions’ family of user-programmable Xilinx® Virtex®-7 FPGA-based computing products, designed to meet the needs of challenging embedded high-performance digital signal and image processing applications. Curtiss-Wright's 4th generation 6U FPGA card, the CHAMP-FX4 combines the dense processing resources of three large Xilinx Virtex-7 FPGAs with over 12 GB of memory resources, all on a rugged 6U OpenVPX (VITA 65) form factor module. (+)

      Features:

      • OpenVPX (VITA 65) profile MOD6-PAY- 4F1Q2U2T-12.2.1-11
      • VPX REDI (VITA 48 option)
      • Three user-programmable Xilinx Virtex-7 FPGAs (585T or X690T), each with: 4 GB DDR3L SDRAM in two 64-bit banks, 36 MB QDRII+ SRAM in two 36-bit banks
    • CHAMP-FX2 FPGA DSP
      The CHAMP-FX2 is Curtiss-Wright's next-generation FPGA-based computing platform utilizing a 6U VPX-REDI form factor (+)

      Features:

      34875.jpg
      • Two Xilinx Virtex-5 Platform FPGAs (LX110T, LX220T, or LX330T)
      • 512 Mbytes or 1 GB DDR2 SDRAM per FPGA in two banks (1-2 Gbyte total on-board), 4.4 GBytes/sec peak bandwidth per FPGA
      • 36 Mbytes QDR-II+ SRAM per FPGA in four banks (72 Mbytes total on-board), 8.8 GBytes/sec peak bandwidth per FPGA
    • CHAMP-FX2 MPC8640 & Virtex-5 VPX Digital Signal Processor
      Two Xilinx Virtex-5 FPGAs (LX110T or LX220T) (+)

      Features:

      • 512 MB or 1 GB DDR2 SDRAM per FPGA in two banks (1-2 GB total onboard), 4.4 GBps peak bandwidth per FPGA
      • 36 MB QDR-II+ SRAM per FPGA in four banks (72 MB total onboard), 8.8 GBps peak bandwidth per FPGA
      • 1 GHz MPC8640D dual-core processor with 512 MB of DDR2 SDRAM in two banks
    • FPE320 3U Processor
      3U VPX FPGA processor board that incorporates the largest Xilinx Virtex-5 SXT, LXT or FXT FPGA available with an FMC mezzanine site (+)

      Features:

      39100.jpg
      • Supports Xilinx Virtex-5 SXT, LXT and FXT FPGAs
      • FMC (VITA 57) mezzanine site for I/O
      • DDR2 SDRAM and QDRII SRAM memory resources
    • MFC700 VPX Memory
      6U VPX-REDI memory carrier with support for up to 16 GB of memory on the baseboard, dual XMC mezzanine sites and a Serial RapidIO fabric (+)

      Features:

      39088.jpg
      • Up to 32 GB DDR2 memory in a single slot (4-16 GB baseboard, with two 2-8 GB XMC Mezzanine sites)
      • Four x4 high-speed Serial RapidIO links to the P1 VPX connector and low-speed I/Os to the backplane
      • Onboard 8 port Serial RapidIO switch
    • CHAMP-FX4 6U OpenVPX Virtex-7
      The CHAMP-FX4 is the flagship 6U product in Curtiss-Wright Defense Solutions’ family of user programmable Xilinx® Virtex®-7 FPGA-based computing products, designed to meet the needs of challenging embedded high performance digital signal and image processing applications. Curtiss Wright’s 4th generation 6U FPGA card, the CHAMP FX4 combines the dense processing resources of three large Xilinx Virtex-7 FPGAs with over 12 GB of memory resources, all on a rugged 6U OpenVPX (VITA 65) form factor module. (+)

      Features:

      292163107861464693.jpg
      • Over 100 GB/s of backplane I/O bandwidth
      • Gen2 Serial RapidIO (SRIO) provides standards-based connectivity to general-purpose processing boards such as the VPX6-1957 and CHAMP-AV8
      • Two FMC interfaces with 80 differential signal pairs
    • FPE320 Xilinx Virtex-5 3U VPX Processor with FMC Site
      Supports Xilinx Virtex 5 LX220T, LX330T or SX240T FPGAs (+)

      Features:

      • FMC (VITA 57) mezzanine site for I/O
      • 400 MSPS to 3 GSPS ADCs available
      • Two banks of 9 MB QDRII SRAM (36-bit) and 2 banks of 512 MB DDR2 SDRAM (32-bit) memory resources
    • HPE720 MPC8640 & Virtex-5 VPX Digital Signal Processor
      Dual Xilinx Virtex-5 FPGAs (LX220/330T or SX240T) (+)

      Features:

      • Four banks of 9 MB QDRII SRAM (36-bit) and 2 banks of 512 MB DDR2 SDRAM (32-bit)
      • Single or dual-core Freescale MPC8640D processor at 1.0 GHz with 1 GB DDR2 per bank
      • Dual FPGA Mezzanine Card (FMC/VITA 57) sites OR 1 FMC and 1 XMC/PMC site
    • CHAMP-WB-A25G
      The CHAMP-WB-A25G couples the dense processing resources of a single large Xilinx Virtex-7 FPGA with a high-bandwidth 25 GS/s 8-bit ADC module in a commercial grade 6U OpenVPX (VITA 65) form factor module. The 25G ADC module can also operate in a dual channel 12.5 GS/s mode. The CHAMP-WB-A25G complements this processing capability with a data plane directly connected to the FPGA with support for Gen2 Serial RapidIO (SRIO) or Aurora up to 10.3 Gbps. (+)

      Features:

      320749380221646148.jpg
      • 6U OpenVPX Wideband Receiver with 25 GS/s ADC
      • Onboard PCIe Gen3 switch
      • Single user-programmable Xilinx Virtex-7 FPGAs X690T, with 8 GB DDR3L SDRAM
    • CHAMP-WB-D25G
      The CHAMP-WB-D25G couples the dense processing resources of a single large Xilinx Virtex-7 FPGA with a high-bandwidth 25 GS/s 10-bit DAC module in a commercial grade 6U OpenVPX (VITA 65) form factor module. The CHAMP-WB-D25G can also be used in conjunction with the CHAMP-WB-D25G companion 25 GS/s ADC card set to create a very high performance wide band communications, EW or sensor processing system. The CHAMP-WB-D25G complements this processing capability with a data plane directly connected to the FPGA with support for Gen2 Serial RapidIO (SRIO) or Aurora up to 10.3 Gbps. (+)

      Features:

      320749713221614236.jpg
      • 6U OpenVPX Wideband Transmitter with 25 GS/s DAC
      • Single user-programmable Xilinx Virtex-7 FPGAs (X690T), with 8 GB DDR3L SDRAM
      • OpenVPX (VITA 65) MOD6-PER-4F-12.3.1-8; MOD6-PER-1Q-12.3.5-2 VPX REDI (VITA 48 option)
  • Mercury Systems  (15 of 22)
    • PowerStream 7000 FCN
      An FPGA Compute Node (FCN) that can incorporate up to 69 Xilinx 7 million-gate FPGAs connected by a RapidIO switch fabric (+)

      Features:

      31382.jpg
      • Includes up to 46 10-Gigabit fiber connections directly to the FPGAs
      • 320 Gbps of I/O available in the base configuration
      • Base configuration uses PowerPC 7447A processors connected by a RapidIO switch fabric
    • ECAD-X-081500
      A VME64x, A/D converter board (+)

      Features:

      • Provides either one or two channels of 8-bit, 1.5 GHz analog-to-digital conversion and programmable FPGAs in a single, 6U VME64x slot
      • Uses Maxim MAX108 A/D converters, providing SFDR in excess of dBFS for input intermediate frequencies (IF) up to 1 GHz and A/D sample rates from 100 MHz to 1.5 GHz
      • Front-panel connectors are provided for the following input signals: analog input, A/D clock, sync signals, trigger, 128-bit auxiliary input, and LVDS I/O
    • Echotek Series SCFE-V5-VXS
      The Echotek Series SCFE-V5-VXS Virtex-5 FPGA-Based Processing Engine provides high-performance processing for applications requiring extreme FPGA processing power (+)

      Features:

      42271.jpg
      • Utilizing the largest FPGAs available from Xilinx, the SCFE-V5-VXS solves the toughest computing problems in a cost-effective form factor
      • The other interfaces on the card, including the QSFP fiber transceivers, and the FMC mezzanine sites, combine with the FPGA processing power to create an interoperable, upgradeable solution for a vast number of platform configurations
      • Three Xilinx Virtex-5 SX240T or LX330T FPGAs in 1,738 pin-package with up to 3,168 raw DSP48e slices
    • MCJ6 FCN Module
      A module that integrates FPGAs into RACE++ VME multicomputers (+)

      Features:

      17596.jpg
      • 6U VME board with two Xilinx Virtex II Pro P70 FPGAs connected to a RACE++ switch fabric via an onboard crossbar
      • Eight serial copper interfaces, 12 serial fiber optic interfaces, and 52 pairs of LVDS I/O
      • More than 5 GBps of I/O
    • PowerStream 6600
      A fully integrated, conduction-cooled multicomputer based on the VPX-REDI draft standards (+)

      Features:

      31429.jpg
      • 16 payload modules can house 64 PowerPC processors or a heterogeneous mix of PowerPCs and Xilinx Virtex-4 FPGAs
      • Conduction-cooled format based on VPX-REDI standard (draft) form factor
      • RapidIO fabric supports an aggregate system bandwidth exceeding 34 GBps and a bisection bandwidth of 16 GBps
    • ECDR-4-14105
      Four A/D converters (14-bit at 105 MHz sampling rate); each followed by an Altera Stratix FPGA with custom IP to implement a wide band receiver and FFT engine (+)

      Features:

      • Two large user-programmable Xilinx Virtex-II Pro FPGAs each with a total of 512 MByte DDR SDRAM. These FPGAs connect directly to each other through four LVDS data links that each provide 622 MBytes/second throughput
      • The FPGA resources are also available to implement custom processing functions (beamforming, direction-finding, etc.) according to user specifications
      • One control/output FPGA with associated 256 MByte DDR SDRAM which outputs data to the appropriate data bus, dual RACE++, serial Rapid I/O, or other Vita 41-defined protocol
    • Echotek Series SCFE-V6-4QSFP-OVPX
      6U OpenVPX fiber I/O module (+)

      Features:

      • Combines 16 channels of high-speed fiber with three Xilinx Virtex-6 FPGAs to achieve a maximum data transfer capacity of 80 Gbps
      • The module is well suited to support the high-bandwidth digitized I/O created by various commercial and defense applications including the current generation of advanced ISR sensors
      • Each of the 16 channels of fiber supports a full duplex data rate up to 5 Gbps, while the three FPGAs enable onboard pre-processing of data streams for maximum application effi-ciency
    • Echotek DCM-V5-VXS
      Echotek Series DCM-V5-VXS Virtex-5 Based FPGA Digital Receiver (+)

      Features:

      42112.jpg
      • Twin FPGA Mezzanine Card (FMC) modules equipped with two each of the following ADCs: 16-bit 130 MSps ADC converters, 14-bit 250 MSps ADC converters, or 10-bit 1.5 GSps ADC converters, with other options available
      • Three Xilinx Virtex-5 SX240T or LX330T FPGAs
      • DDR-II SDRAM and QDR-II SRAM
    • Serial RapidIO-to-PCIe Intelligent Bridge Core
      A Serial RapidIO-to-PCIe Intelligent Bridge Core (+)

      Features:

      32609.jpg
      • Available as Verilog HDL in either Synopsis or Synplicity synthesis environments
      • Core can be implemented in FPGAs, ASICs, ASSPs, or SoC devices
      • Core connects a Serial RapidIO port (RapidIO 1.2) operating at up to 3.125 GHz to an x8 PCI Express port (PCI Express 1.1) operating at 2.5 GHz through a nontransparent bridge
    • RACE++ FPGA Compute Nodes
      FPGA compute nodes fully integrated into a RACE++ VME system (+)

      Features:

      • Easy application partitioning between FPGAs and PowerPCs
      • Off-the-shelf IP Provides RACE++ and memory interfaces
      • FPGA Developer's Kit (FDK) simplifies FPGA code development
    • Echotek Series ECV4-4
      The Echotek Series ECV4-4 family of digital receivers implements a flexible baseboard plus mezzanine architecture while supporting an extremely high density of FPGA-processing power (+)

      Features:

      • This combination of flexibility and power allows the family to deliver unique capabilities, such as multi-board coherency, while addressing a range of analog signal requirements
      • Seven user-programmable Virtex-4 FPGAs plus one Stratix FPGA
      • Multiple backplane interfaces for VXS, RACE++, and VME64x
    • Echotek ECV4-2
      A family of mixed-signal PMC and XMC modules that serve as high-performance digital receivers for the mixed-signal industry (+)

      Features:

      • Two Virtex-4 FPGAs for data processing and PCI/PCI-X interfacing
      • PMC/PCI form factor
      • Preloaded FPGA development IP
    • OpenSAL
      An open source version of Mercury Computer Systems' Scientific Algorithm Library (SAL) for vector math acceleration (+)

      Features:

      • SAL is a high-throughput, low-latency signal processing library containing efficient algorithms with the fewest possible instructions and computing resources
      • OpenSAL provides a robust API, C code reference design and documentation for over 400 SAL math functions
      • Simplifies programming of heterogeneous processing environments such as FPGAs and DSPs
    • Ensemble
      Serial RapidIO AdvancedTCA application development system (+)

      Features:

      17666.jpg
      • Supports up to five mesh-enabled carrier boards in an AdvancedTCA chassis communicating over an off-the-shelf passive backplane
      • Direct 4X serial RapidIO path to and from every board to every other board for 100 GBps full duplex capacity
      • Carrier boards may be used as node boards in a chassis compliant with a future RapidIO subsidiary specification to PICMG 3.0
    • ECV4-RFT
      A mixed-signal module with capability to coordinate data streams to and from sets of spatially distributed sensors (+)

      Features:

      • Based on COTS technology
      • Combines high-speed A/D and D/A technology, Xilinx Virtex-4 FPGA reconfigurable processors, and fiber I/O
      • Suitable for wideband applications that require a blend of powerful remote processing and low-latency data transfer
  • SingMai Electronics  (3)
    • PT6
      line based video pattern generator IP core for Altera FPGAs (+)

      Features:

      38017.jpg
      • Five preset video patterns allow comprehensive testing of video systems
      • Small resource footprint for use in the smallest FPGAs
      • Pattern memories are programmable [...]
    • PT8 IP Core
      Multi-standard, near broadcast quality, video encoder IP core for FPGAs supporting PAL-M/N/B/D/G/H/I and NTSC-M/J (+)

      Features:

      38248.jpg
      • 2,036 logic elements allows multiple encoders in the smallest of FPGAs
      • High quality video output:
      • Output is up-sampled 27 MHz straight binary digital composite video
    • DP5-A
      An Altera FPGA development board for SD and HD video applications with integrated PT13 compact microprocessor IP core (+)

      Features:

      205185828498506999.jpg
      • Altera EP3C25 FPGA
      • Three piggyback board expansion connectors
      • Bundled with PT13 compact microprocessor IP core and unlimited time/use license for all Altera FPGAs.
  • Pentek, Inc.  (15 of 85)
    • 7700 Series
      A family of PCI Express boards (+)

      Features:

      42422.jpg
      • Routing Flexibility Designed Specifically for Communications, Software Radio, Radar, Telemetry, and Signal Intelligence Applications
      • Gen 2 PCI Express x16 Interface
      • Latest PC and Blade Server Compatibility
    • Model 7158
      Dual 500 MHz A/D, 800 MHz D/A, Virtex-5 FPGAs - PMC/XMC module (+)

      Features:

      42940.jpg
      • The module includes two A/D and two D/A converters, two Virtex-5 FPGAs and two banks of DDR2 SDRAM
      • Complete software radio interface solution
      • Two 500 MHz, 12-bit A/D, one digital upconverter,Two 800 MHz, 16-bit D/As
    • 7250 & 7250D
      Quad (Model 7250) or Octal (Model 7250D) 200 MHz, 16 bit A/D with Virtex-5 FPGAs (+)

      Features:

      43335.jpg
      • 6U CompactPCI board
      • Also available in 3U CompactPCI format as Model 7350 (Quad only)
      • Complete software radio interface solution
    • 7256 & 7256D
      Dual or quad 400 MHz A/D, 800 MHz D/A, Virtex-5 FPGAs - 6U CompactPCI boards (+)

      Features:

      43196.jpg
      • Complete software radio interface solution
      • Two (Model 7256) or four (Model 7256D) 400 MHz, 14-bit A/D converters
      • One or two digital upconverters
    • 7856
      Dual 400 MHz A/D, 800 MHz D/A, Virtex-5 FPGAs - x8 PCIe board (+)

      Features:

      43197.jpg
      • Complete software radio interface solution
      • PCI Express 2.0 (Gen. 2) interface up to x8 wide
      • Built-in fan for added cooling
    • 7700
      A New Family of PCI Express boards (+)

      Features:

      41723.jpg
      • Routing Flexibility Designed Specifically for Communications, Software- Defined Radio, Radar, Telemetry, and Signal Intelligence Applications
      • Gen 2 PCI Express x16 interface
      • Latest PC and Blade Server Compatibility
    • 7858
      Dual 500 MHz A/D, 800 MHz D/A and Virtex-5 FPGAs - x8 PCIe (+)

      Features:

      43336.jpg
      • Complete software radio interface solution
      • PCI Express 2.0 (Gen 2) interface up to x8 wide
      • Two 500 MHz, 12-bit A/D converters
    • 6232
      32-channel narrowband digital receiver VIM-4 Module with FPGAs and FPDP Inputs (+)

      Features:

      8851.jpg
      • Eight Graychip GC4016 quad narrowband DDCs can select any of the inputs
      • Center frequency tuning from DC to 32 MHz
      • Output bandwidths from 3.2 kHz to 1.6 MHz
    • 6230
      32-channel narrowband Digital Receiver VIM-4 Module with FPGAs and A/Ds (+)

      Features:

      8470.jpg
      • Four 65 or 80 MHz, 14-bit A/Ds
      • Eight Graychip GC4016 quad narrowband DDCs can select any of the inputs
      • Center frequency tuning from DC to 32 MHz
    • Models 7241, 7341
      7241: Dual-channel 6U CompactPCI or 7241D Quad-channel 6U CompactPCI; 7331 Dual-channel 3U CompactPCI; software-defined radio transceivers with FPGAs (+)

      Features:

      • Complete software-defined radio transceiver solutiions
      • Two or four 125 MHz 14-bit A/Ds and two or four 500 MHz 16-bit D/As
      • Four or eight digital downconverters
    • 7342 / 7242D
      Multichannel Software Radio Transceiver with Virtex-4 FPGAs - 3U/6U CompactPCI (+)

      Features:

      34440.jpg
      • Complete software radio interface solution
      • Four or eight 125 MHz 14-bit A/Ds
      • One or two digital upconverters
    • 7242
      A multichannel transceiver (+)

      Features:

      32564.jpg
      • 4-Ch A/D, 1-Ch D/A w/Virtex-4 FPGAs 6U CompactPCI
      • Complete software radio interface solution
      • Eight 125 MHz 14-bit A/Ds
    • Model 7156
      Useful for designers needing high-bandwidth channels, wideband data conversion, or multichannel synchronization – in SDR, radar, or other data acquisition applications (+)

      Features:

      42113.jpg
      • Dual FPGA section for IF processing, data reduction, or a handy place to crunch some DSP numbers or implement custom I/O
      • Both FPGAs are based upon Xilinx Virtex-5 devices, either LXT (logic) or SXT (DSP)
      • Output from the PMC consists of twin TI DAC5688 DACs running at 800 MHz
    • 7800 Series
      High-performance I/O boards built upon a versatile half-length x8 PCI Express (PCIe) 2.0 carrier board (+)

      Features:

      43149.jpg
      • Carrier board hosts a PMC/XMC module to fulfill a wide range of software radio, data acquisition, and beamforming applications
      • Consequently, designers can utilize PCI Express, FPGAs, and high-speed interfaces in low-cost PCs as well as in blade servers
      • Carrier features a number of high-speed gigabit serial connectors for interboard communication
    • 6256
      Dual/Quad A/D VIM-2 module with FPGA (+)

      Features:

      18976.jpg
      • Two or four 14-bit, 105 MHz /Ds
      • Two user-configurable Virtex-II Pro FPGAs
      • 64 MB SDRAM and 16 MB flash per FPGA
  • Altera Corporation  (15 of 16)
    • EP4SGX230
      40-nm FPGA (+)

      Features:

      • Up to 680K logic elements (LEs)
      • 2X bigger than Altera's Stratix III family
      • Altera 40-nm devices meet the diverse high-end application needs in a large number of markets such as wireless and wireline communications, military, broadcast, and ASIC prototyping
    • Stratix IV GT FPGAs
      Data rates from 155 Mbps to 11.3 Gbps (+)

      Features:

      • Transceivers operating at 11.3 Gbps
      • Optimized for 40G and 100G applications
      • Arria II GX FPGAs are the lowest power 3.75 Gbps transceiver FPGAs and are cost optimized for applications using mainstream protocols such as PCIe and GbE
    • Cyclone IV FPGA Family
      Integrated transceivers (+)

      Features:

      • Ideal for high-volume, cost-sensitive applications
      • Meet increasing bandwidth requirements while lowering costs
      • Family includes: Cyclone IV GX FPGAs with up to eight integrated 3.125-Gbps transceivers and Cyclone IV E FPGAs for a wide spectrum of general logic applications
    • Embedded HardCopy Blocks and 28 Gbps transceivers
      Provide a new partial reconfiguration method (+)

      Features:

      44581.jpg
      • Partial reconfiguration will improve logic density's effectiveness by allowing external memory storage of FPGA functions not presently needed
      • 28 Gbps embedded transceivers
      • 28 nm FPGAs
    • Cyclone III FPGAs
      Lowest power 65-nm FPGA (+)

      Features:

      • Manufactured using TSMC's 65-nm low-power (LP) process technology
      • Core static power as low as 35 mW at 25 ºC junction temperature
      • Unused I/O banks can be powered down via support for hot-socketing operation
    • Embedded Systems Development Kit, Cyclone III Edition
      Embedded software development tools: Nios II Embedded Design Suite with Nios II IDE, C2H Compiler*, MicroC/OS-II RTOS*, and NicheStack TCP/IP Stack* (* licensed separately); Software applications and tutorials inc. remote system update, picture viewer, hardware acceleration, and application selector utility (+)

      Features:

      42365.jpg
      • Hardware design tools, including the Quartus® II design software with the SOPC Builder system development tool
      • Library of standard embedded IP cores and suite of pre-built hardware and software reference designs, including: Three Nios II 32-bit CPU cores (fast, standard, economy); DDR, SRAM, timer, UART, SPI, JTAG UART, GPIO, DMA, 10/100 Ethernet, LCD controller, SD card interface, custom instruction, and more
      • Complete embedded development board with color touch panel, LCD touch screen, and LCD multimedia HSMC card featuring: Cyclone III EP3C120 FPGA and 10/100 Ethernet PHY, 256-Mbyte DDR2 SDRAM, 8-Mbyte pseudo SRAM, 64-Mbyte flash, three HDSM debug cards and connectors; Audio in, audio out, composite video input, VGA output, push buttons, LEDs, PS2, SD card socket, and embedded USB-Blaster™ circuitry for FPGA configuration
    • Arria GX FPGA Family
      A transceiver-based FPGA ranging from 21,580 to 90,220 Logic Elements (LEs) (+)

      Features:

      33364.jpg
      • Up to 4.5 Mb memory, 12 transceivers
      • Supports two speeds of 1.25 and 2.5 Gbps
      • Utilizes PCIe (x1 and x4), GbE, and Serial RapidIO (1x and 4x) protocols
    • Stratix II DKs
      A portfolio of development kits for the Stratix II family of FPGAs (+)

      Features:

      • Includes a high-speed interface kit, a DSP kit, and an embedded design kit
      • Each kit includes a development board, 16 MB of Flash memory, a CD containing documentation and reference designs, a power supply, a USB Blaster download cable, and other cables
      • Kits ship with Altera's Quartus II design software and a suite of interface IP cores [...]
    • ALTERA STRATIX IV FPGAS WITH HIGH-PERFORMANCE FLOATING-POINT MEGAFUNCTIONS
      Altera provides the largest library of IEEE 754-compliant floating-point megafunctions (+)

      Features:

      42984.jpg
      • Addition/subtraction [altfp_add_sub]
      • Multiplication [altfp_mult]
      • Division [altfp_div]
    • Cyclone II
      A family of low-cost FPGAs (+)

      Features:

      • Up to 68,416 logic elements for high-density applications
      • Up to 1.1 Mb of embedded memory for general-purpose storage
      • Up to 150 18x18 embedded multipliers for low-cost DSP applications
    • Nios II, Stratix
      Internal clock frequency rates up to 500 MHz and typical performance >250 MHz (+)

      Features:

      19250.jpg
      • Deliver on average 50% faster performance and more than 2x the logic capacity than first-generation Stratix FPGAs
      • Deliver 50x higher multiplier bandwidth than single-chip, standalone digital signal processors
      • The DSP blocks have the flexibility and performance to implement fast, arithmetic-intensive applications such as image processing, wireless communications, military, broadcast, and medical
    • Nios II, Cyclone
      Optimized for low cost, extending the reach of FPGAs further into cost-sensitive, high-volume applications (+)

      Features:

      33543.jpg
      • Customer-defined feature set, industry-leading performance, and low power consumptio
      • Greatly increased density and more features, all at significantly lower cost
      • 150 embedded 18 x 18 multipliers
    • 28-nm Stratix V FPGAs
      With the variable-precision DSP block, Altera's Stratix V FPGA can support – on a block-by-block basis – various precisions ranging from 9-bit x 9-bit up to single-precision floating point (mantissa multiplication) within a single DSP block (+)

      Features:

      46469.jpg
      • This frees you from FPGA architecture restrictions, allowing you to use the optimum precision at each stage of the DSP data path
      • Increased system performance, reduced power consumption, and reduced architectural constraints
      • Each variable-precision block can be configured at compile time to implement: Dual 18-bit x 18-bit multipliers in the 'sum' or 'independent' modes
    • EP4SE820
      Altera's newest member of the 40 nm Stratix IV E family (+)

      Features:

      43884.jpg
      • Density increase of 53 percent over Altera's EP4SE530 FPGA
      • 820 K logic elements
      • Benefits military, wireless, wireline, storage apps, ASIC emulation and prototyping, and high-end digital apps
    • Cyclone II FPGA
      Industry's lowest-cost programmable logic platform for DSP implementation (+)

      Features:

      19241.jpg
      • Offers up to 68,416 LEs of logic density and 1.1 Mb of embedded memory
      • Delivers embedded configurable multipliers for low-cost DSP applications
      • Provides up to 150 18-bit x 18-bit multipliers operating at up to 250 MHz
  • Annapolis Micro Systems, Inc.  (15 of 20)
    • WILDSTAR 7 Conduction Cooled for OpenVPX
      WILDSTAR 7 Conduction Cooled for OpenVPX 6U boards provide up to two Xilinx Virtex 7 FPGAs per board with VX690T or VX980T FPGAs, up to 8 GB of DDR3 DRAM for 51.2 GB/s of DRAM bandwidth or up to 64 MB of QDRII+ SRAM for 32 GB/s of SRAM bandwidth. Up to 1.9 million logic cells and 3.3 million multiplier bits per board. Air or Conduction Cooled. (+)

      Features:

      308666452861250814.jpg
      • One or Two XILINX VIRTEX 7 FPGAS
      • Backplane I/O
      • Front Panel I/O
    • WILDSTAR UltraKVP for OpenVPX 6U & 3U
      WILDSTAR UltraKVP FPGA boards utilize Xilinx Kintex FPGAs, which feature the most multipliers currently deployable, or UltraScale+ FPGAs, which feature 28Gb signaling capability! These FPGA cards are hot-swappable and paired with Annapolis OpenVPX compliant 6U/3U backplanes, enabling even the most bandwidth-intensive applications. All Annapolis COTS boards are rugged, open, deployable, and offer different cooling options, making them the most cutting-edge Xilinx-based products on the market. (+)

      Features:

      344672717861844727.jpg
      • Up to three Xilinx® Kintex® UltraScaleâ„¢ XCKU115, Virtex® UltraScaleâ„¢ XCVU125/XCVU190 or Virtex® UltraScale+â„¢ XCVU5P/XCVU9P FPGAs
      • Dual core ARM Cortex-A9 Processor (Zynq SoC)
      • A Full Board Support Package using Open Project Builder for fast and easy Application Development
    • Wildstar 6 for OpenVPX
      Our 14th-generation WILDSTAR 6 for OpenVPX uses Xilinx's newest Virtex-6 FPGAs for state-of-the-art performance (+)

      Features:

      45439.jpg
      • Up to three Virtex-6 FPGA processing elements - XC6LX240T, XC6LX365T, XC6LX550T, XC6SX315, or XC6SX475
      • Up to 7 GB DDR2 DRAM in 14 banks or up to 448 MB DDRII or QDRII SRAM
      • OpenVPX backplane
    • Wildstar 6 for OpenVPX
      Our 14th-generation WILDSTAR 6 for OpenVPX uses Xilinx's newest Virtex-6 FPGAs for state-of-the-art performance (+)

      Features:

      45439.jpg
      • Up to three Virtex-6 FPGA processing elements – XC6LX240T, XC6LX365T, XC6LX550T, XC6SX315, or XC6SX475
      • Up to 7 GB DDR2 DRAM in 14 banks or up to 448 MB DDRII or QDRII SRAM
      • OpenVPX backplane
    • 24 GHz A/D CPD System
      Clock and synchronize up to 16 channels of 1.5 Hz A/D (+)

      Features:

      • Full bandwidth A/D data collection
      • Full bandwidth processing with up to five Virtex II Pro FPGAs per VME slot
      • Full bandwidth data distribution
    • WILDSTAR A5 for OpenVPX 6U
      These FPGA boards include 3 Altera Stratix V FPGAs with 48 High Speed Serial connections performing up to 14.1 Gbps. On each Compute Processing Element (CPE) FPGA there is six 72-bit QDRII+ SRAM interfaces clocked up to 550 MHz. The IO Processing Element (IOPE) FPGA has four 32-bit DDR3 DRAM ports clocked at up to 800 MHz. With included High Speed Serial (HSS) FPGA cores (including 40GBASE-KR), there is up 20 GB/s of bandwidth on the VPX data plane which can go directly to other VPX cards or to a switch, depending on backplane topology. (+)

      Features:

      • One, Two or Three ALTERA STRATIX® V FPGAS
      • PCIe Gen3 8x from each FPGA to on-board PCIe switch
      • 16x High Speed Serial IO lanes to VPX Data Plane (P1) for 20 GB/s of Full Duplex Bandwidth
    • WILDSTAR 7 Conduction Cooled for OpenVPX 6U
      These FPGA boards include two Xilinx Virtex 7 FPGAs with 64 High Speed Serial connections performing up to 13.1 Gbps. The IO Processing Element (IOPE) FPGA has a choice of QDRII+ SRAM or DDR3 DRAM. The DRAM option has four 32-bit DDR3 DRAM ports clocked at up to 800 MHz while the SRAM option has two 72-bit QDRII+ SRAM interfaces clocked up to 500 MHz. With included High Speed Serial (HSS) FPGA cores (including 40GBASE-KR), there is up 20 GB/s of bandwidth on the VPX data plane which can go directly to other VPX cards or to a switch, depending on backplane topology. (+)

      Features:

      • One or Two XILINX VIRTEX 7 FPGAS: VX690T or VX980T
      • Up to 8 GB of DDR3 DRAM for 51.2 GB/s of DRAM bandwidth or up to 64 MB of QDRII+ SRAM for 32 GB/s of SRAM bandwidth
      • PCIe Gen3 8x from each FPGA to on-board PCIe switch
    • WILDSTAR UltraKVP ZPB for 6U & 3U OpenVP
      Annapolis FPGA boards are engineered for superior performance and maximum bandwidth. Both Altera and Xilinx FPGAs are leveraged to offer the best FPGA technology available and to fit customer preference, design requirements and production schedule. These FPGA boards paired with Annapolis OpenVPXcompliant 6U/3U backplanes enable even the most bandwidth-intensive applications. Rugged UltraKVP ZPB FPGA boards are designed from the ground up to withstand a broad temperature range: -55Ë? to +85Ë?C. [...] (+)

      Features:

      3756237598613608171.jpg
    • WILDSTAR II
      A COTS, high-speed DSP board, using Xilinx's Virtex II FPGAs as the processing elements (+)

      Features:

      25824.jpg
      • Suitable for radar, sonar, SIGINT, ELINT, DSP, FFTs, communications, software radio, encryption, image processing, and prototyping applications
      • Accepts the WILDSTAR line of I/O daughtercards [...]
    • Processing with Zynq UltraScale+ MPSoC
      Three (6U) or one (3U) Xilinx Ultrascale(+) FPGAs (+)

      Features:

      366190693950905303.jpg
      • Xilinx Zynq UltraScale+ MPSoC Controller
      • OpenVPX Backplane I/O
      • Front Panel I/O
    • WILDSTAR A10 2PE & 3PE for OpenVPX 6U
      Up to three Altera Arria 10® GX900, GX1150, GT1150 FPGAs (+)

      Features:

      347439128861920370.jpg
      • Dual Core ARM Cortex-A9 Processor (Cyclone V SoC)
      • PLX PCI Express Gen3 Switch
      • System Management
    • Wild40 for PCIe FPGA Boards
      Range of FPGAs to choose from (+)

      Features:

      333792402861309046.jpg
      • PLX PCI Express Gen3 Switch
      • Xilinx® Zynq-7000 SoC
      • Provides dedicated AXI bus to FPGA for register access without requiring PCIe interface
    • Quad 16 Bit I/O
      A/D I/O card provides four channels of 130 or 160 MHz input with 16-bit resolution (+)

      Features:

      33251.jpg
      • Four LTC2208 (130 MHz) or 4 LTC2209 (160 MHz), each one fed by its own signal
      • Universal single ended 50 Ohm clock input
      • Multiple I/O cards can be synched together via the Annapolis 4 Channel Clock Distribution Board
    • CoreFire Next
      The CoreFire Next Design Suite (compatible with all Annapolis Virtex™ 7 and Altera Stratix® V FPGA processor and I/O boards) is a dataflow-based development system that brings new levels of ease and speed to FPGA programming on Annapolis Micro Systems, Inc. high-performance motherboards, I/O cards, and mezzanine cards. (+)

      Features:

      308663900861183040.jpg
      • Build Designs for FPGAs on WILDâ„¢ Boards
      • Works from High Level, Data Flow Concept of the Application
      • Combines GUI Design Entry and Debug Tools with Tested, Optimized CoreFire Nextâ„¢ IP Cores
    • WILD OpenVPX EcoSystem
      The WILD OpenVPX EcoSystem, with its mix and match COTS OpenVPX boards provides the most FPGA based processing and the fastest and widest bandwidths available, to allow Annapolis customers to input, process, move around and output much more data than has ever been possible before, to enable vastly improved processing in applications such as Signal Processing, Radar, SIGINT, and ELINT. (+)

      Features:

      • The WILD Ecosystem begins with a 4 slot chassis with a custom designed high performance mesh backplane, a 6 slot chassis with a custom designed high speed switched backplane with room for 1 switch card, and a 12 slot chassis with a custom designed high speed backplane with accomodation for 2 switch cards
      • Backplanes will carry data at up to or greater than 10G on their dataplanes
      • The EcoSystem also includes WILDSTAR 6 FPGA Processing boards, with 1, 2 or 3 Xilinx Virtex 6 FPGAs, and WILDSTAR A5 FPGA Processing boards, with 1, 2 or 3 Altera Stratix V FPGA Processing boards
  • XILINX, Inc.  (15 of 30)
    • Xilinx Virtex-6 FPGAs for Higher-Bandwidth and Lower-Power Systems
      Virtex-6 LXT FPGAs for high-performance logic, DSP, and serial connectivity with low-power GTX 6.5 Gbps serial transceivers (+)

      Features:

      42302.jpg
      • Virtex-6 SXT FPGAs for ultra-high-performance DSP and serial connectivity with low-power GTX 6.5 Gbps serial transceivers
      • Virtex-6 HXT FPGAs for highest-speed serial connectivity with up to 64 GTH serial transceivers supporting line rates beyond 11 Gbps
      • Ideal development platform for 3GPP-LTE and advanced LTE base stations with higher densities, performance, and power amplifier efficiencies of up to 40 percent
    • Xilinx ISE Design Suite 12
      ISE Design Suite 12 software unlocks greater design productivity with breakthrough technologies for power optimization and cost (+)

      Features:

      • The Design Suite enables the fastest time to design completion with Xilinx Targeted Design Platforms – available in four configurations aligned to user-preferred methodology logic, embedded, DSP, or system design
      • Xilinx Targeted Design Platforms provide embedded, DSP, and hardware designers with access to an array of devices supported by open standards, common design flows, IP, and runtime platforms
      • The ISE Design Suite offers domain-specific design environments and enables designers to meet power and performance goals with Xilinx CPLDs and FPGAs, including the new Virtex-6 and Spartan-6 families
    • Avnet Virtex-6 FPGA DSP Kit
      Wireless, aerospace and defense, instrumentation and medical imaging applications continue to drive demanding performance requirements for today's sophisticated electronic systems (+)

      Features:

      46504.jpg
      • Due to their inherent hardware structure advantages, Xilinx FPGAs outstrip the high-end computing power of traditional digital signal processors
      • Based on the performance leading Virtex-6 FPGAs, this DSP Kit bundles pre-validated software tools, IP and hardware into a platform that addresses even the most challenging applications
      • With the addition of targeted reference designs, the Virtex-6 FPGA DSP kit enables users to focus on creating their own unique differentiation from the very beginning of the product development process, accelerating development for experienced users while also simplifying the adoption of FPGAs for new users
    • Virtex-6 FPGAs
      Virtex-6 LXT FPGAs for high-performance logic, DSP, and serial connectivity with up to 36 low-power 6.5Gbps GTX transceivers and 864 DSP slices at 600 MHz (+)

      Features:

      42972.jpg
      • Virtex-6 SXT FPGAs for ultra high-performance DSP and serial connectivity with up to 36 low-power 6.5Gbps GTX transceivers and 2,016 DSP slices at 600 MHz
      • Virtex-6 HXT FPGAs for highest bandwidth with over 1Tbps connectivity from up to 720 SelectIO™ pins and 72 multi-rate transceivers, including GTH transceivers delivering line rates in excess of 11Gbps
      • Design out of the box with the Virtex-6 FPGA Evaluation Kit [...]
    • Xilinx Spartan-6 FPGAs for Low Power and High-Speed Connectivity
      Spartan-6 LX FPGAs optimized for absolute lowest cost with up to 150K logic density, 4.8 Mb memory, integrated memory controllers, and easy-to-use and high-performance system IP including DSP blocks (+)

      Features:

      42301.jpg
      • Spartan-6 LXT FPGAs optimized for lowest risk and lowest cost serial connectivity solution with up to eight 3.125 Gbps GTP transceivers and embedded PCI Express-compatible core
      • Performance and flexibility to meet changing consumer requirements of automotive infotainment applications
      • Cost-effective alternative to ASICs for rapid development and delivery of flat panel displays within ever-shrinking product life cycles
    • Xilinx Spartan-6 FPGAs for Low Power and High-Speed Connectivity
      Spartan-6 LX FPGAs optimized for absolute lowest cost with up to 150K logic density, 4.8 Mb memory, integrated memory controllers, and easy-to-use and high-performance system IP including DSP blocks (+)

      Features:

      42301.jpg
      • Spartan-6 LXT FPGAs optimized for lowest risk and lowest cost serial connectivity solution with up to eight 3.125 Gbps GTP transceivers and embedded PCI Express-compatible core
      • Performance and flexibility to meet changing consumer requirements of automotive infotainment applications
      • Cost-effective alternative to ASICs for rapid development and delivery of flat panel displays within ever-shrinking product life cycles
    • Xilinx Spartan-6 FPGAs
      Cost-effective alternative to ASICs with the performance and flexibility to meet changing system requirements (+)

      Features:

      42976.jpg
      • Spartan-6 LX FPGAs for absolute lowest cost with up to 150K logic density, 4.8Mb memory, integrated memory controllers, and up to 180 DSP blocks at 250 MHz
      • Spartan-6 LXT FPGAs for lowest risk, lowest cost serial connectivity with up to eight 3.125Gbps GTP transceivers
      • PCI Express Endpoint, and up to 180 DSP slices at 250 MHz
    • XtremeDSP Devices
      The Xilinx XtremeDSP initiative helps you develop tailored high performance DSP solutions for aerospace and defense, digital communications, multimedia, video, and imaging industries. (+)

      Features:

      33609.jpg
      • High-performance configurable FPGAs for DSP designs
      • Development boards and Intellectual Property (IP)
      • System Generator and AccelDSP design and development tools
    • Avnet Spartan-6 FPGA DSP Kit
      Xilinx FPGAs exceed the computing power of DSPs with their inherent parallelism and offer co-processing methods of performance acceleration for signal processing (+)

      Features:

      46503.jpg
      • The Xilinx Spartan-6 FPGA DSP Kit integrates hardware, IP, software development tools and methodologies together into solutions that accelerate development for experienced users and simplify the adoption of FPGAs for new users
      • With the addition of targeted reference designs, these DSP platforms enable users to focus on creating their own unique differentiation from the very beginning of the product development process
      • This kit includes the Xilinx Spartan-6 LX150T board and allows users to quickly learn the different tool flows and design techniques involved in creating DSP centric designs with the Spartan-6 FPGA family
    • VIRTEX-4 FX60
      90 nm FPGAs (+)

      Features:

      • Support all major serial standards including PCI Express, Serial RapidIO, Ethernet, and Fibre Channel
      • Integrated 622 Mbps – 10.3125 Gbps serial transceivers [...]
    • XtremeDSP Development Tools
      Model and design your system using MATLAB, Simulink, and blocksets from The MathWorks (+)

      Features:

      31771.jpg
      • Use the Xilinx bit and cycle accurate library for designing algorithms for the FPGA
      • Import MATLAB algorithms like linear algebra and matrix inversion and multiplication
      • Automatically generate HDL or a bitstream at the push of a button with no loss in performance over designs written in HDL
    • PicoBlaze
      The Xilinx PicoBlaze is a compact, capable, and cost-effective fully embedded 8-bit RISC microcontroller core optimized for the Xilinx Spartan™-3, Virtex™-II, Virtex-II Pro™ and Virtex-4 FPGAs and CoolRunner™-II CPLDs (+)

      Features:

      • Predictable performance, always two clock cycles per instruction, up to 200 MHz or 100 MIPS in a Virtex-4™ FPGA and 88 MHz or 44 MIPS in a Spartan-3 FPGA
      • 16 byte-wide general-purpose data registers
      • 1K instructions of programmable on-chip program store, automatically loaded during FPGA configuration
    • Virtex-6 and Spartan-6 FPGAs
      Reduce system cost by up to 60% lower system cost through greater integration made possible by an intelligent mix of hard IP and programmability (+)

      Features:

      41325.jpg
      • Cut power consumption by 65% using innovating, efficient power management
      • Shrink development time by 50% through effective IP reuse and enhanced ease-of-use
      • Achieve over 1 Tbps bandwidth for flexible, high-speed system interfacing
    • PCI Express
      A PCI Express intellectual property core (+)

      Features:

      • Uses the RocketIO 3.125 Gbps serial transceivers of the company's Virtex-II Pro and Virtex-4 FX FPGAs
      • Protocol and electrically compatible to the v1.0 base PCI Express specification
      • Core reaches a 2.5 Gbps line speed utilizing the features of the RocketIO multi-gigabit transceivers, such as clock data recovery, 8B/10B encoding, 3.125 Gbps SerDes, transmit/receive FIFOs, and CRC [...]
    • Platform Studio V7.li
      Version 7.li of the Platform Studio SDK (Software Development Kit), a platform development suite used to simplify FPGA embedded systems design (+)

      Features:

      • Incorporates a variety of usability enhancements and new features
      • Automates configuration of user-defined hardware co-processing modules used to replace application-specific software algorithms
      • Enhancements include push-button generation of comprehensive design datasheets, automatic generation of application test code for peripherals, and auto setup of the simulation environment
  • Impulse Accelerated Technologies  (7)
    • Impulse CoDeveloper
      High-level FPGA design software (+)

      Features:

      • Allows C-language algorithms and applications to be compiled and optimized for use with FPGAs
      • By using Impulse C and the Impulse CoDeveloper C-to-FPGA tools, users have the power to accelerate C algorithms by orders of magnitude (as much as 300X) over equivalent embedded processor implementations
      • Enter designs in ANSI C
    • Acceleration Station P-300L
      Desktop workstation for software application developers researching FPGA-based algorithm acceleration (+)

      Features:

      • Over 1.2 million programmable logic elements usable from C
      • Pico Computing EX-300 accelerator card
      • 16 Xilinx Spartan XC3S5000 FPGAs
    • Impulse CoDeveloper, Impulse C
      Enter device independent FPGA designs using ANSI C and compile into Altera or Xilinx (+)

      Features:

      • Work within Visual Studio, GCC, Eclipse, or other standard IDEs
      • Cab mix with VHDL code if desired
      • Identify hotspots for acceleration
    • FeedHandlingKit
      Feed Handling system which builds on COTS FPGA based hardware to accelerate processing speed while protecting your company's intellectual property (+)

      Features:

      • Acceleration – FPGA based hardware/software systems can accelerate some feed handling systems by 100x over pure microprocessor solutions
      • Protection of Intellectual Property – this methodology enables solution providers to offer the ability for end-users to insert custom functions, and to do so without accessing the IP provided by the solutions provider
      • Reusable, Retargetable and Portable – because the code remains in C and synthesizable VHDL it can be easily moved to improved hardware as newer platforms emerge
    • CoDeveloper for Virtex II Pro
      A C-to-FPGA, hardware/software co-design system for PowerPC-based Xilinx FPGAs (+)

      Features:

      • Allows users to describe, test, and compile C language applications, partitioning them between the Virtex II Pro's embedded PowerPC processor
      • Allows FPGA algorithms to be developed using popular C/C++ development environments, including Microsoft Visual Studio, Metrowerks CodeWarrior, and open-source GCC-based tools
      • Automates hardware/software interface creation and generates synthesizable HDL outputs compatible with popular FPGA synthesis and simulation tools [...]
    • Impulse C-to-FPGA Tools
      Software-to-FPGA tools (+)

      Features:

      • Work with BlueCat Linux from LynuxWorks
      • Enable software developers to write C algorithms and refactor them for parallel processing on an FPGA
      • 10 – 100x performance increase in image, signal, and data processing algorithms
    • C to FPGA Video Kit
      Video Processing FPGA Developer's Kit for rapid design of medical, military, automotive, and consumer electronics video systems (+)

      Features:

      • C to FPGA compilation
      • Analysis of C for opportunities to accelerate code through increased parallelism, unrolling loops and adjusting stage delays
      • Machine-generated parallelism/optimization
  • Extreme Engineering Solutions (X-ES)  (3)
    • XCalibur5090
      The XCalibur5090 is a high-performance, reconfigurable, conduction-cooled 6U LRM module featuring dual Xilinx Virtex-7 FPGAs, high-speed serial interfaces, DAC and ADC channels, external memory, and flexible, high-density I/O. The XCalibur5090 utilizes four AD9739 and two ADC12D1600RF to provide four channels of high-frequency 14-bit Digital Analog Conversion (DAC) at 2500 Mbps and four channels of 12-bit Analog Digital Conversion (ADC) at 3200 Mbps for high-performance Digital Signal Processing (DSP). (+)

      Features:

      314776900022905961.jpg
      • Two Xilinx Virtex-7 XC7VX690T FPGAs
      • Up to 1 GB of DDR3 SDRAM per FPGA in two channels
      • Non-volatile FPGA configuration flash
    • XPedite2403
      XPedite2403 is a high-performance, reconfigurable, conduction- or air-cooled XMC module based on the user-programmable Xilinx Virtex-7 family of FPGAs. With dual x8 PCI Express Gen3 interfaces, external memory, 24 high-speed fiber-optic receivers, and 8 GB of DDR3-1600 SDRAM in two channels, the XPedite2403 is ideal for customizable, high-bandwidth, data-processing, and data acquisition applications. It incorporates 24 high data rate, protocol-independent fiber-optic receivers that comply to ARINC 804 and utilize 50/125µm multi-mode fiber with MT connectors. (+)

      Features:

      347264910022123999.jpg
      • Xilinx Virtex-7 FPGA XC7VX690T
      • Conduction- or air-cooled XMC module
      • Twenty-four 10.3125 Gb/s optical receiver links
    • XPedite2300
      The XPedite2300 is a high-performance reconfigurable conduction- or air-cooled XMC module based on the Xilinx Virtex-6 family of FPGAs. With a x8 PCI Express interface, external memory, and high-density I/O, the XPedite2300 is ideal for customizable, high-bandwidth, data-processing applications. (+)

      Features:

      192299440216165139.jpg
      • Two channels of DDR3 SDRAM, up to 1 GB (512 MB each)
      • Volatile and non-volatile FPGA configuration flash
      • 80 MB of user NOR flash
  • Gidel  (4)
    • PROCStar II
      An evaluation and system PCI board based on Stratix PLD FPGAs (+)

      Features:

      • Up to four Altera Stratix II 60 to 180 FPGAs
      • Standalone and PCI 32/64, 33/66 with 16 DMAs @ ~430 MHz sustain rate
      • Five-level memory structure (more than 2.5 GB): up to 3720 M512 RAM blocks (32 x 18 bits); up to 3072 M4K RAM blocks (128 x 36 bits); up to 36 MegaRAM blocks (4K x 144 bits); up to 8 large memories 64 MB DDR II with up to 10 GBps sustain access for up to 128 ports; and two DDR II SODIMMs up to 1 GB each
    • PROCStarIII
      The PROCStarIII family of reconfigurable systems provide application specific algorithm acceleration and SoC verification using Stratix III FPGAs from Altera (+)

      Features:

      • 1-4 Stratix III 80E, 110E, 260E or 150L FPGAs
      • 8 lanes of PCI Express for 2 GBps bandwidth host communications
      • 8 SODIMM slots for up to 16 GB of on board memory
    • HSDB
      A line of High Speed Daughter Board (HSDB) cards (+)

      Features:

      • Enables system flexibility
      • Up to 6 HSDBs in a simple system (all on component side)
      • Up to six daughterboard locations on the print side (used by Gidel daughter boards as PROCBridge)
    • PROCe III PCIe x4 Computation Accelerator
      High-capacity, high-speed FPGA-based platform fortified with high throughput and massive memory (+)

      Features:

      • Stratix III 80E, 110E, 260E, 150L or 340L FPGAs
      • 4-lane PCI Express (PCIe x4) host interface
      • Five level memory structure (supports 16.5 GB+)
  • Avnet Memec  (1)
    • Design\IP Support
      Helps specify, develop, and design FPGAs by serving as an extension of a design team (+)

      Features:

      33652.jpg
      • Provides the additional resources and knowledge base during the critical implementation phase, so customers can meet aggressive time-to-market milestones
      • Offers a wide set of Intellectual Property (IP) cores Avnet Memec has locations across North America and features FPGAs from Actel. Avnet Memec's factory trained and certified Field Applications Engineers are readily available to support all of your design requirements. [...]
  • DRS Technologies  (4)
    • Chameleon VME
      A reconfigurable processor board (+)

      Features:

      • Four Xilinx Virtex-1000E FPGAs
      • Up to 56 Mbytes of SRAM
      • Up to 128 Mbits of configurable memory
    • Chameleon cPCI
      A family of reconfigurable CompactPCI I/O boards (+)

      Features:

      • 6U CompactPCI boards
      • 66 MHz/64-bit
      • Three PMC mezzanine sites
    • Chameleon VMEbus
      A family of reconfigurable VMEbus I/O boards (+)

      Features:

      • 6U VME64X with up to 133 MHz bus rate and up to 266 MHz FPGA rate
      • Xilinx Virtex processors (XCV1000E to XCV2000E, up to four FPGAs per board)
      • Supports up to three PMC (64 bit / 66 MHz) mezzanine sites
    • DIREC
      A digital down conversion board (+)

      Features:

      • Baseband quadrature sampling
      • Hilbert transforms
      • Real and complex FIR Filtering
  • Synopsys, Inc.  (2)
    • Synplify Premier
      The Synopsys FPGA design solution comprises high-quality, high-performance, and easy-to-use FPGA implementation and debug tools (+)

      Features:

      46489.jpg
      • Designers using the Synopsys FPGA design tools gain fast time-to-results for complex FPGAs, area optimization for cost and power reduction, multi-FPGA vendor support, and incremental and team-design capabilities for faster FPGA design development
      • The Synopsys FPGA design tools also provide additional value by offering DesignWare IP integration, links to high-performance functional verification with VCS, integration with Synphony Model Compiler, and an ASIC compatible synthesis flow for FPGA-based prototyping
      • As part of the Synopsys FPGA Design Solution, Synplify Premier software performs FPGA synthesis for programmable devices sold by Actel, Achronix, Altera, Lattice Semiconductor, Silicon Blue and Xilinx
    • HAPS-70: FPGA-Based Prototyping System
      HAPS-70 series is an easy-to-use and cost effective FPGA-based prototyping system. Enhancements to the HAPS system technology, as well as the use of the latest Xilinx Virtex®-7 FPGAs, provide designers using the HAPS-70 series with superior capacity, performance, and advanced verification modes. The HAPS-70 series enables early hardware/software integration and system-level validation at near-real-time run-rates, using at-speed, real-world interfaces. FEATURES: - Modular system architecture scales from 12 - 144M ASIC gates to accommodate a range of design sizes, from individual IP blocks to processor sub-systems to complete SoCs - Enhanced HapsTrak 3 I/O connector technology with high speed time-domain multiplexing delivers up to 3x performance improvement in data throughput over traditional pin multiplexing - System definition and bring-up utilities speed hardware assembly and ensure the prototype’s electro-mechanical integrity - Advanced power and cooling management - Design planning tools reduces time-to-prototype by 2-3 months streamlining the transition from block level IP validation to full system integration - Improve debug efficiency with 100x greater visibility and 8x faster download time of debug trace buffer data - Advanced use modes including co-simulation, transaction-based verification, and hybrid prototyping - HAPS-70 FPGA-based prototyping systems are available in nine model variants, with capacities from 12 to 144 million ASIC gates [...] (+)

      Features:

  • TTTech Computertechnik AG  (1)
    • TTP controller IP
      A TTP controller IP (Intellectual Property) that can be synthesized into Altera Cyclone II or III FPGAs (+)

      Features:

      36157.jpg
      • Low-cost FPGA leaves additional gates free to replace other in-system functions
      • Designed for extended temperature civilian and military applications
      • Available as a synthesizable netlist for Altera's Cyclone FPGAs, or Altera's HardCopy II structured ASICs
  • CSP Inc. (CSPI) MultiComputer Division  (5)
    • VXS-M16
      The FastCluster 3000 SERIES VXS switch module offers a high-speed 10-Gigabit serial interconnect with low latency and improved signal integrity for DSP applications (+)

      Features:

      34858.jpg
      • Supports seven 3000 SERIES VXS payloads with hybrid compute nodes based on the Freescale 8641 Multicore processor and Xilinx Virtex-5 FPGAs
      • Air and Conduction Cooled VXS switch modules
      • Two serial I/O ports on the front panel support fiber (XFP) or copper transceivers for sensor I/O
    • 3000 SERIES VXS Payloads
      The FastCluster 3000 SERIES VXS payloads integrate multi-core processors, FPGAs, and 10-Gigabit clustering technology to deliver high performance, interoperability, and flexibility (+)

      Features:

      34857.jpg
      • Hybrid Computing Solutions using VXS Payloads with Freescale 8641D General Purpose Multi-core Processors and Xilinx Virtex-5 reconfigurable FPGAs
      • Myri-10G clustering technology for scalable bi-section bandwidth and 10-GbE interoperability
      • Air and Conduction Cooled VXS payloads with PMC/XMC support
    • FastCluster XL-Gate
      The XL-Gate provides a Hybrid Computing Solution delivering the acceleration of Virtex-5 FPGAs and the optimized performance/power ratio of a MPC8641 General Purpose Processor (+)

      Features:

      43508.jpg
      • The reconfigurable XL-Gate FPGA payload supports Xilinx Virtex-5 LXT or SXT FPGA's (on an XMC Module)
      • FPGA development is simplified by the use of the CoreFire Design Suite, turning high-level data flow concepts into algorithms programmed for the XL-Gate FPGA board
      • Available in air-cooled or conduction cooled versions
    • 3000 SERIES
      A series of VXS systems that support multicore, FPGA, and 10 GbE interoperability while delivering a 5x performance increase in bisection bandwidth over the previous generation (+)

      Features:

      32170.jpg
      • Rugged, high-performance scalable embedded cluster with general purpose processors, reconfigurable FPGAs, and high-speed interconnect on VXS
      • VXS switch with Myri-10G Clustering Technology and 10 GbE compatibility
      • VXS payload with Freescale multicore PowerPC AltiVec
    • FPGA Development Platform
      The CSPI FPGA Development Platform includes advanced tools needed to accelerate the design, build, and test phase of your DSP application for the FastCluster Run-time Platform (+)

      Features:

      43507.jpg
      • The FPGA Development Platform for FastCluster supports a Virtex-5 FPGA XMC development board, Java SE Development Kit, Xilinx ISE, Microsoft Visual Studio and the CoreFire Design Suite
      • The FastCluster FPGA Run-time Platform includes an FPGA payload, drivers, library, Board Support Package, and Debugger Agent
      • Development and Run-Time Platforms use the same FPGA (Xilinx Virtex-5) XMC modules [...]
  • Nikor  (1)
    • PCIDSP-5501
      High performance digital signal processing module (+)

      Features:

      20225.jpg
      • Plug&Play PCI 2.1 33MHz/32-bit slave, Master/Slave (optional) support
      • Up to 400k gates in Spartan-3 family FPGAs
      • Spartan-3 FPGAs system clock rate up to 320 MHz
  • Interface Concept  (3)
    • IC-FEP-VPX6a
      Virtex-6 & QorIQ 6U VPX processing unit (+)

      Features:

      53016.jpg
      • VPX hybrid processing engine coupling the latest generations of FPGAs and processor
      • Provides a very high level of performance per watt
      • With its QorIQ processor for system management and a PCIe advanced switch to couple the processing nodes, the ICFEP-VPX6a board expands the flexibility of the two Virtex-6 FPGAs and the VPX high bandwidth serial interfaces
    • IC-FEP-VPX6a
      VPX hybrid processing engine coupling the latest generations of FPGAs and processor, both of them providing a very high level of performance per watt (+)

      Features:

      52840.jpg
      • 6U VPX board based
      • Two Xilinx Virtex-6 FPGA
      • One QorIQ processor
    • IC-FEP-VPX3c
      The IC-FEP-VPX3c expands our Front End Processing family with a solution based on Xilinx Virtex-7 FPGAs (XC7VX690T, DDR3, QDRII+) to respond to seemingly insatiable bandwidth demand. Designed for applications requiring a very high level of computing power in a compact 3U form factor, the IC-FEPVPX3c board offers the highest bandwidth with the lowest power consumption. The IC-FEP-VPX3c mixed with the other building blocks of our 3U OpenVPX product ranges (Core I7 and PowerPC SBCs, Ethernet Switches & Routers, PCIe switch, FMC/XMC/PMC), running our Signal Processing Reference Design (including signal acquisition, Processing, DMA Engine, data storage, signal generation...), is the ideal platform for customers who want to streamline development by concentrating their efforts on their most critical tasks. A MTCA.4 board with Virtex-7 and 2 * FMC slot will be available soon. Please consult us. FEATURES: 1 * Xilinx Virtex-7 XC7VX690T (other versions on demand) 2 * banks of DDR3: 64-bit wide, 2GB each Optional QDRII+ 450MHz, 36-bit wide / up to 36 Mbits 128 MBytes of BPI NOR flash (bitstream storage) VPX Interfaces: 4 * 4-lanes fabric ports on P1: 16 GTX/GTH (Fat Pipes A, B, C & D) General purpose IOs on P2 16 differential pairs (from FPGA) 16 differential pairs (from FMC IOs connector) 1 * FMC site: 8 GTX/GTH (FPGA part number dependent) 80 differential pairs 4 reference clocks PIC µ-controller for System Management to VITA 46.11 The IC-FEP-VPX3c is a 3U VPX board compliant with 3U module definitions of the VITA 46.0 standard. It is available in air-cooled (1’’) and conduction cooled (0.8’’) versions compliant with VITA 47 classes. [...] (+)

      Features:

  • Athena Group  (2)
    • D2 Board
      A PC-hosted development board containing one 'C6211/'C6711 DSP and two Altera APEX FPGAs (400/600/1000/1500K gate densities available) (+)

      Features:

      • 256 Kbytes of SRAM
      • 64 Mbytes of SDRAM
      • 53-Gbit/sec I/O
    • A7-400/600
      A board that contains an Altera Philips Semiconductors Volocity RSP7, and programming cable and documentation (+)

      Features:

      • Up to three A7 boards can be installed on an Athena ARM-based platform, providing up to 4.5M FPGA gates
      • FPGAs may be programmed with user-defined logic or Athena DSP cores [...]
  • VadaTech Inc.  (2)
    • Signal Processing Solutions
      VadaTech provides Signal Processing Solutions that redefine performance density with superior SWaP-C. From RADAR data acquisition & signal processing, FPGA/data processing, video/image processing, & more, VadaTech has a solution for you. Our standard modular building blocks include high-performance multi-core Intel, Tilera, and Freescale processors; Altera, Xilinx, and TI FPGAs; ATI & other graphics processors; & powerful ADCs and DACs. (+)

      Features:

      308688375538687283.jpg
      • Modular Open Standard Architectures (MOSA)
      • Approx 1/2 the SWaP-C of competing products
      • Rugged 1U Signal Processing platforms with time stamping options
    • Virtex-7 FPGA carriers
      Virtex-7 690T FPGA carriers in the AMC format (+)

      Features:

      310904945861713774.jpg
      • Utilize the 690T device providing over 693 K logic cells and 3600 DSP slices
      • The AMC 516 has banks of 64-bit and 16-bit DDR3 memory and an on-board P2040 PowerPC
      • The AMC527 is a similar Virtex-7 690T FPGA, except it has 3 banks of 144 Mb QDR-II memory and does not have a PowerPC
  • SystemCrafter  (2)
    • SC V2.00
      Design, debug, and simulate hardware and systems using existing C++ development environment (+)

      Features:

      • Synthesizes SystemC into RTL VHDL for Xilinx FPGAs
      • Integrated GUI for file management
      • Descriptions are fast to write, fast to simulate, maintainable, and readable
    • SystemCrafter SC v3
      SystemCrafter SC synthesises hardware designs written in SystemC to VHDL or Verilog (+)

      Features:

      • The HDL can be used with commonly available tools to target Xilinx FPGAs
      • Improved SystemC coverage, including support for state machines and combinatorial logic
      • New Verilog output
  • Alizem Inc.  (1)
    • MC SW IP for Servo Apps on Altera FPGA
      Off-the-shelf motor control software IP targeting high performance applications on Altera FPGAs. Designed to be used by non FPGA and non motor control experts. (+)

      Features:

      • Based on Vector Control Algorithm
      • Evolvable Software IP on Altera Cyclone FPGAs
      • Easy-to-use application programming interface (API)
  • INTERFACE CONCEPT  (1)
    • IC-FEP-VPX6b
      Interface Concept's IC-FEP-VPX6b leverages on Xilinx Virtex®-7 FPGA and NXP QorIQ T1042 technologies to offer a high-bandwidth processing 6U OpenVPX platform for demanding computing applications such as RADAR/LIDAR and EW. This QorIQ T1042 processor supports four integrated 64-bit e5500 Power Architecture® processor cores with high-performance Data Path Acceleration Architecture (DPAA) and network peripheral interfaces. Each of the two on-board Virtex®-7 FPGAs is coupled with two 2GB DDR3 SDRAM memory banks supporting up to 1800 MT/s. A PCIe advanced switch allows versatile coupling between the processor, the FPGAs and the fabric links of P1 VPX connector. Two FMC sites (Vita57.1) allow to interface various IOs and high resolution ADC and DAC converters to the FPGAs , providing modularity and flexibility to the carrier. Both air-cooled and conduction-cooled versions for rugged applications are available. The IC-FEP-VPX6b is the ideal platform for customers who want to streamline development by concentrating their efforts on most critical tasks. (+)

      Features:

      365808970410520318.jpg
      • QorIQ processor T1042, e5500 quad core
      • 2*Xilinx Virtex-7 XC7VX690T
      • 1*Gen2 PCIe switch
  • Agilent Technologies  (7)
    • COTS VME/VXS Boards
      A new family of COTS VME/VXS (VITA 41 form factor) boards combining state-of-the-art Xilinx Virtex-4 SX and FX functionalities with advanced Acqiris data conversion technology (+)

      Features:

      32078.jpg
      • Incorporates Acqiris' JetSpeed II technology for clock generation and distribution
      • Feature two Xilinx Virtex-4 FPGAs, one SX55 targeted at digital signal processing and one FX100 for data flow control
      • Provides support for the VXS interface, two optical links on the front panel, a VME64x interface as well as DDR2 SDRAM memory and auxiliary analog and digital I/Os
    • VME/VXS product fam
      The series combines state-of-the-art Xilinx Virtex-4 SX and FX functionalities with advanced Acqiris data conversion technology (+)

      Features:

      33339.jpg
      • Family incorporates Acqiris' JetSpeed II technology for clock generation and distribution, while supporting GigaSample per second (GS/s) up to date ADC and DAC technologies that offer best in class performances
      • Based on a scalable, modular architecture, the new VME/VXS boards feature two Xilinx Virtex-4 FPGAs, one SX55 targeted at digital signal processing and one FX100 for data flow control
      • Support for the VXS interface, two optical links on the front panel, a VME64x interface as well as DDR2 SDRAM memory and auxiliary analog and digital I/Os
    • B4655A
      FPGA dynamic probe logic analysis application for debugging Xilinx FPGAs, including the Virtex-II, Virtex-II Pro, and Spartan-3 families (+)

      Features:

      18302.jpg
      • Up to 64 internal probe points for each physical debug pin
      • 2X data compression option
      • State and timing analysis modes
    • Agilent U1083A, 10- and 14-bit High-Speed VME/VXS Modules
      6U single slot 10- to 14-bit high-speed VME/VXS (VITA 41) modules (+)

      Features:

      42370.jpg
      • 2 Xilinx Virtex-4 FPGAs, SX55 and FX100
      • Firmware Development Kit containing FPGA interface cores, software, and reference design
      • Two onboard DDR2 SDRAM banks (512 MB total) and local 128 MB Flash memory able to store multiple FPGA bit streams
    • Agilent U1083A, 10- and 14-bit High-Speed VME/VXS Modules
      6U single slot 10- to 14-bit high-speed VME/VXS (VITA 41) modules (+)

      Features:

      42370.jpg
      • 2 Xilinx Virtex-4 FPGAs, SX55 and FX100
      • Firmware Development Kit containing FPGA interface cores, software, and reference design
      • Two onboard DDR2 SDRAM banks (512 MB total) and local 128 MB Flash memory able to store multiple FPGA bit streams
    • M9703A
      The Agilent M9703A is a revolutionary 8-channel, 12-bit high-speed digitizer able to capture signals from DC up to 2 GHz at 1.6 GS/s. (+)

      Features:

      219957532961754970.jpg
      • Interleaving capability allows waveform acquisition at up to 3.2 GS/s with exceptional measurement accuracy
      • Real-time data processing
      • Up to 4 GB (256 MSamples/ch) on-board memory
    • B4655A FPGA Dynamic Probe
      For visibility into FPGA´s internal activity (+)

      Features:

      • Up to 64 internal signals for each pin dedicated to debug
      • Ability to switch internal probe points in seconds
      • Maps internal signal naming from your FPGA design tool to your logic analyzer
  • Atmel Corporation  (2)
    • AT17F16
      A 16-Mbit, In-System Programmable (ISP) FPGA configuration IC (+)

      Features:

      17126.jpg
      • Offers single-chip ISP configuration storage for SRAM-based FPGAs up to 4 million gates, including Virtex XCV4000, Stratix EP1SGX40, and Apex EP20K1500E devices
      • A 44-pin version of the device for replacing pin-compatible OTP XC17V16 configuration memories in existing boards is also available
      • When used with lower-density FPGAs, the unused configuration memory can be used as general-purpose, non-volatile data storage
    • AT91CAP7E
      ARM7-based MCU with a direct FPGA interface, six-layer advanced high-speed bus (AHB), peripheral DMA controller, and 160 Kb of on-chip SRAM (+)

      Features:

      37210.jpg
      • On-chip peripherals include USB 2.0 full speed device, SPI master and slave, two USARTs, three 16-bit timer counters, an 8-channel/10-bit analog to digital converter, plus interrupt control and supervisory functions noted above
      • FPGA interface on the provides the FPGA with direct access to the on-chip AHB and peripheral DMA controller
      • Eliminates FPGA-induced bus contention, off-loads MCU-to-FPGA communications from the CPU, and frees up the external bus interface for external memory access
  • TEK Microsystems, Inc.  (10)
    • Atlas-V5 VXS
      The Atlas-V5 provides eight channels of 12-bit 1 Gsps analog inputs streaming up to 12 GB/s into three Xilinx Virtex 5 FPGAs in a single 6U VME / VXS slot (+)

      Features:

      41929.jpg
      • Eight Channels: 12-bit ADC Input at 1 Gsps ea
      • All eight ADCs Clocked from a Common Input, or Two Independent Clock Inputs for Groups of Four ADC channels
      • High Channel Count, Low Latency Data Routing and Large /Fast FPGA Processing
    • Calypso-V6
      The new Calypso-V6 supports either two 12-bit analog-to-digital converter (ADC) channels at 3.6 GSPS (Gigasamples per second) or six channels at 1.8 GSPS. Like all members of the QuiXilica-V6 VME / VXS family, the Calypso-V6 is compatible with legacy VME systems as well as newer ANSI/VITA 41 VXS based systems and combines the highest density FPGA processing available in any 6U form factor with the ultimate in ultra wide band ADC signal acquisition. (+)

      Features:

      186593658209512272.jpg
      • Two 12-bit ADCs at 3.6 GSPS, Also supports 6 channels @ 1.8 GSPS
      • Three Xilinx Virtex®-6 FPGAs
      • Sample-accurate trigger input
    • Orion-V5 VXS
      The QuiXilica Orion-V5 VXS - a 6U ANSI/VITA 41 (VXS) high-speed digitizer combining high density FPGA processing with two 12-bit DAC output channels performing at 3.0 Gsps each (+)

      Features:

      • Sample accurate synchronization across multiple boards
      • Phase-matched DAC outputs
      • Six Digital IO channels running at up to 3.75 Gb/s using one QSFP and two SFP+ front panel connections
    • Pallene-V6 VME/VXS
      Combines 3 Xilinx Virtex-6 FPGAs with TI ADS54RF63 12-bit A/D converters (+)

      Features:

      52522.jpg
      • Supporting 8 channels @ up to 550 MSPS with sample accurate synchronization across all boards
      • Two 10-bit ADCs at 5 GSPS
      • Also supports 4 channels @ 2.5 GSPS or 8 channels @ 1.25 GSPS
    • Gemini-V6
      The QuiXilica Gemini-V6 VXS is a 6U VME and ANSI/VITA 41 (VXS) compliant high-speed digitizer board that combines high density FPGA processing with the latest 12-bit ADC and DAC technology. The Gemini-V6 supports either one input channel at 3.6 GSPS or three input channels at 1.8 GSPS, combined with a high speed output channel at up to 4.0 GSPS. (+)

      Features:

      187136802982179989.jpg
      • One 12-bit ADC at 3.6 GSPS, also supports three channels at 1.8 GSPS
      • test 12-bit sampling in a COTS product and best available solution for 1st and 2nd Nyquist sampling with 900 MHz staring bandwidth
      • Combines ADC with DAC output channel at up to 4.0 GSPS
    • Triton-V5 VXS
      The QuiXilica Triton-V5 VXS - a 6U ANSI/VITA 41 (VXS) high-speed digitizer 1 10-bit A/D input channel at 2.2 Gsps colocated with one 12-bit D/A at 3.0 Gsps (+)

      Features:

      41847.jpg
      • Sample accurate synchronization across multiple boards. ADC and DAC can use common clock
      • First COTS product to achieve this level of performance
      • Six Digital IO channels running at Up to 3.75 Gb/s using one QSFP and two SFP+ front panel connections
    • Proteus-V5 VXS
      The QuiXilica Proteus-V5 VXS is a 6U VME and ANSI/VITA 41 (VXS) compliant high-speed digitizer board that combines high density FPGA processing with two 10-bit ADC devices (+)

      Features:

      • Two 10-bit ADCs at 5 GSPS
      • Also supports four channels @ 2.5 GSPS or eight channels @ 1.25 GSPS
      • Three Xilinx Virtex-5 FPGAs: Acquisition and processing on a single card without backplane throughput limitations
    • Titan-V5 VXC
      The Titan-V5 includes four 1 GSPS analog input channels, four analog output channels of up to 1.2 GSPS and three Xilinx Virtex-5 FPGAs (+)

      Features:

      42696.jpg
      • Eight channels: Four 12-bit ADC Inputs at 1 GSPS each, Four 14-bit DAC output at 1.2 GSPS each
      • Achieves ultra low latency from acquisition to Response critical to jamming and RADAR decoy applications
      • Unprecedented capability for developers requiring ultra wide band signal generation
    • Calypso-V5 VXS
      The QuiXilica Calypso-V5 VXS is a 6U VME and ANSI/VITA 41 (VXS) high-speed digitizer board that combines high-density FPGA processing with the latest 12-bit ADC technology (+)

      Features:

      45122.jpg
      • Two 12-bit ADCs at 3.2 GSPS
      • Also supports 6 channels @ 1.6 GSPS
      • Fastest 12-bit sampling in a COTS product
    • Proteus-V6 VME/ VXS
      Proteus-V6 combines 3 Xilinx Virtex-6 FPGAs with 2 e2v EV10AQ190 10-bit A/D converters, supporting either 2 channels at 5 GSPS, 4 at 2.5 GSPS, or 8 at 1.25 GSPS (+)

      Features:

      • Two 10-bit ADCs at 5 GSPS
      • Also supports 4 channels at 2.5 GSPS or 8 channels at1.25 GSPS
      • Three large pin count (1759 Pin Package) Xilinx Virtex-6 devices available per board (LX240, SX315, or SX475) Other configurations available
  • Parsec  (3)
    • PM430: Dual FPGA PMC
      Two Altera Stratix EP1S25 processing FPGAs, upgradable to EP1S40 devices (+)

      Features:

      20531.jpg
      • Two 32/64-bit 33/66MHz PCI-to-local-bus bridges supporting target read/write and DMA transactions
      • Separate target and DMA buses provide simultaneous data transfer in both directions
      • Single PMC version with one processing FPGA also available, such as PM431
    • PM431
      A PMC module that employs FPGA technology to provide a high bandwidth processing platform targeted at typical Radar/Video functions such as FFT, FIR filters, and convolution (+)

      Features:

      41445.jpg
      • FPGAs: High speed DSP processing in ALTERA Stratix FPGA; EP1S25C6 Processing FPGA (standard) to EP1S40 ; onboard non-volatile storage of FPGA configuration data; Two banks of Processing FPGA configuration data provided; automatic configuration of FPGAs after power-up
      • Memory: standard: 5 x 256K x 36 ZBT memories (5 MB); Optional: 5 x 512K x 36 ZBT memories (10 MB)
      • PCI Interface:
    • PM432
      A single PMC module that leverages on ALTERA Stratix II GX FPGA technology to provide a high-speed, high-bandwidth processing platform, ideally suited for Software Defined Radio (SDR), WiMAX, Radar, Video, as well as other computation and bandwidth intensive applications (+)

      Features:

      41446.jpg
      • Processing FPGA
      • EP2SGX90 ALTERA Stratix II GX FPGA
      • 90,960 Logic Elements, 192 18x18 multipliers and 4.3 Mb RAM
  • Spectrum Signal Processing  (10)
    • PRO-3100
      A 6U, CompactPCI Virtex-II FPGA processing engine (+)

      Features:

      14186.jpg
      • Designed to interface to the TMI-3300 and PRO-3500 (PowerPC G4) boards
      • Four user-programmable Virtex-II FPGAs, each supporting up to six million gates
      • IBM 405GP PowerPC embedded controller
    • ePMC-32MSDDC
      Eight Graychip GC4016 digital down converters support 32 narrowband or 8 wideband channels (+)

      Features:

      11701.jpg
      • Supports both wideband and narrowband signals
      • DDCs can be synchronized to provide coherent baseband signals
      • Two user-programmable Xilinx FPGAs for post-processing outputs from down converters
    • HCDR-1002
      A PowerPC-based high-channel-density receiver with FPGA-based channelization (+)

      Features:

      • Processes up to 26 MHz at 65 Msamples/sec
      • High-speed communications fabric based on the Solano Communications IC
      • Two 14-bit, 65 or 80 Msamples/sec analog-to-digital converters from Xilinx Virtex-E series FPGAs for channelization functions
    • PEM-8MSDDC Re-Configurable Multi-Standard
      Single-width PEM module compatible with Spectrum's Monaco, Barcelona, and Daytona platforms and Spectrum's PMC-2MAI A/D converter (+)

      Features:

      22353.jpg
      • Each PEM-8MSDDC provides: 8 narrowband, 8 or 4 IS-95CDMA (with 2x or 4x over sampling respectively), or two 5 MHz wideband channels
      • FIFO for each channel holds up to 2K complex samples
      • Each channel has on-the-fly selection of four digitized IF streams ranging from 30 MSPS up to 65 MSPS
    • PEM-8MSDDC Re-Configurable Multi standard
      Single-width PEM module compatible with Spectrum's Monaco, Barcelona, and Daytona platforms and Spectrum's PMC-2MAI A/D converter (+)

      Features:

      • Each PEM-8MSDDC provides: 8 narrowband, 8 or 4 IS95 CDMA (with 2x or 4x over sampling respectively), or two 5 MHz wideband channels
      • FIFO for each channel holds up to 2K complex samples
      • Each channel has on-the-fly selection of four digitized IF streams ranging from 30 MSPS up to 65 MSPS
    • SDR-2000 Electronic Intelligence (ELINT)
      Provides two receive and one transmit channel at industry standard 213.33 MSPS supporting 160 MHz IF with bandwidths in excess of 80 MHz (+)

      Features:

      • Wideband operation enables simultaneous processing of multiple emitters within the same IF bandwidth
      • Based on Dual Intel Xeon server architecture exploiting proven Spectrum flexComm tools and technology
      • Incorporates multiple Xilinx Virtex-II and Virtex-4 FPGAs all interconnected through high performance communications fabrics
    • SDR-3000 Software Defined Radio platform
      CompactPCI-based architecture (+)

      Features:

      22214.jpg
      • Xilinx Virtex-II FPGAs
      • PowerPC MPC7410 G4s
      • Optional TI TMS320C64X DSPs
    • SDR-3000 Series
      A series of software defined radio transceiver subsystems (+)

      Features:

      14872.jpg
      • CompactPCI-based hot swap architecture
      • Supports up to 1000 simultaneous transmit and receive communication channels per chassis
      • Combines Xilinx Virtex-II FPGAs and PowerPC MPC7410 G4s in a single system
    • SDR-4000 WM
      Wireless Modem (WM) (+)

      Features:

      32260.jpg
      • Supports black-side (IF-to-Ethernet) digitization and processing of complex waveforms
      • Consists of XMC-3321 dual transceiver module mounted onto a 3U CompactPCI PRO-4600 carrier card
      • Each SDR-4000 WM provides modem, link, and network layer processing of a software defined radio
    • SDR-3000 SMRDP
      An "RF to Ethernet" wideband military communications (MILCOM) rapid-prototyping and development platform (+)

      Features:

      • Fully integrated, commercial-off-the-shelf (COTS) software defined radio platform
      • A “skinny” version of Spectrum's SDR-3000 MRDP providing a single-slot modem hardware solution
      • Integrates the latest Xilinx Virtex-4 Field Programmable Gate Array (FPGA) technology with Spectrum's proven MPC7410 PowerPC and TMS320C64x( digital signal processing technology
  • Embedded Systems Design, Inc.  (1)
    • StreamBlade Family
      FPGA based platforms support development of combined software and reconfigurable hardware processing applications (+)

      Features:

      • Developers have full access to configured FPGAs and general purpose processors
      • GbE ports, utilizing hard core MACs allow for the implementation of distributed FPGA processing nodes
      • Ethernet connectivity provides network based command, control, and status
  • QinetiQ  (4)
    • Quixilica Floating-Point QR Processor Core
      Scalable QR decompositon core for Xilinix Virtex and Virtex-II family FPGAs (+)

      Features:

      • Implements QR decomompositon for solving a wide range of least-means-square problems
      • Input matrix size can be configured
      • Supports complex or real data
    • Quixilica Callisto VXS-1
      High performance FPGA Based Communications management and processing platform (+)

      Features:

      • Fits in Switch card position in a VXS (VITA41.0) backplane
      • Supports 4X, full Duplex 3.125 GBps high speed serial links to up to sixteen VXS Payload slots
      • Front panel breakout of up to twelve 2.5 GBps links through fibre or copper SFP Transceivers
    • Quixilica Programmable Digital Radar Receiver
      Software programmable multi-channel digital radar receiver for Xilinx Virtex-II and Virtex-II PRO FPGA families (+)

      Features:

      • Programmble Quixilica FIR Filter Modules provide flexible filter chain
      • Optional Digital Down Conversion from fs/4 to baseband
      • Software programmable for filter configuration
    • Quixilica Floating Point FPGA Cores
      IEEE-754 compliant variable wordlength floating point artithmetic cores for Xilinx Virtex, Virtex E, and Virtex-II FPGA families (+)

      Features:

      • Includes IEEE-754 single and double precision wordlengths
      • Fully piplelined architecture
      • Supports Virtex, Virtex-E, and Virtex-II FPGA families
05/20/19 03:45
Close

Subscribe to FPGA updates